2007-07-19
5011615002-U6E2
VFD-PU06 Digital Keypad Instruction Sheet
X Description of the Digital keypad VFD-PU06
LED Display
Indicates frequency, voltage, current, user
defined units, read, and save, etc.
Frequency Command
Status indicator
F
H
U
Output Frequency
Status indicator
Model Number
VFD-PU06
User Defined Units
Status indicator
Status Display
Display the driver's current status.
EXT PU
JOG
By pressing JOG key,
Jog frequency operation.
MODE
Change between different display mode.
UP and DOWN Key
JOG
PU
Set the parameter number
and changes the numerical
data, such as Master Frequency.
Left Key
Move cursor to the left.
Right key
Move the cursor to the right
FWD/REV Key
Select FWD/REV operation.
STOP/RESET
Stops AC drive operation and reset the drive
after fault occurred.
STOP
RESET
RUN
RUN Key
Start AC drive operation.
Y Explanation of Display Message
Display Message
Descriptions
The AC motor drive Master Frequency Command.
The Actual Operation Frequency present at terminals U, V, and W.
The custom unit (u)
The output current present at terminals U, V, and W.
Press
to change the mode to READ. Press PROG/DATA for about 2
sec or until it’s flashing, read the parameters of AC drive to the digital keypad
PU06. It can read 4 groups of parameters to PU06. (read 0 - read 3)
Press
to change the mode to SAVE. Press PROG/DATA for about 2 sec
or until it’s flashing, then write the parameters from the digital keypad PU06 to
AC drive. If it has saved, it will show the type of AC motor drive.
The specified parameter setting.
The actual value stored in the specified parameter.
Download from Www.Somanuals.com. All Manuals Search And Download.
|