Aquatic Rescue
™
Command Center
Model Number 78157
Please keep this instruction sheet for
future reference, as it contains important
information. Adult assembly is required.
Figures sold separately and subject to availability.
This toy is not designed for use in water.
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts
Landing Pad
Wheelhouse Roof
Flag
Message Center
Elevator
Platform
3 Voice Tech™
Video Cards
Search Light
Fuel Hose
Elevator
Column
Repair Wrench
2 Video
Screen Doors
Buoy
Rescue
Launcher
Life
Preserver
Docking Bay
Door
Medical Platform
Crane Arm
Rescue Platform
Support
Whale
Anchor
Crane Base
Rescue Platform
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Message
Center
Reqiures four “C” (LR14) alkaline batteries for operation
(not included). Tool required for battery installation:
Phillips screwdriver (not included).
• Locate the battery compartment door on the back of the
message center.
• Loosen the screw in the battery compartment door with
a Phillips screwdriver.
• Remove the battery compartment door.
• Insert four “C” (LR14) alkaline batteries, as indicated
inside the battery compartment.
• Fit the tab on the battery compartment door into the slot in
the battery compartment. Close the battery compartment
door and tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Hint: We recommend using alkaline batteries for longer
battery life.
1.5V x 4
“C” (LR14)
Shown Actual Size
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted batteries from
the toy. Battery leakage and corrosion can damage this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the "Battery Installation"
instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure
and other parts. Do not use a damaged battery charger until it has been properly repaired.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
1
• Locate deck supports A and B.
Note the markings on the supports.
• Insert the pegs on each end of the
map into the holes on the inside of
deck support A and deck support B.
Map
B
A
Hint: You will need to hold these parts
together, then proceed to the next step.
B
2
• With the base on a flat surface,
note the A and B markings in the
square slots.
A
• Insert and “snap” deck support
A and deck support B into the
matching base slots marked A
and B.
Map
Base
• Pull up on each support to be
sure each is secure in the base.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
3
4
• Locate deck supports C, D, E, F,
and G. Note the markings on the
supports.
• Insert and “snap” deck supports
C, D, E, F and G into the
matching base slots.
D
C
E
G
• Pull up on each support to be
sure each is secure in the base.
F
• Place the peg on the right side
of the medical platform into the
hole in deck support G. Fit the
other medical platform peg into
the slot in deck support F.
• Place the peg on the right side
of the docking bay door into the
hole in deck support F. Fit the
other docking bay door peg into
the slot in deck support E.
E
F
G
• Position the boat hook so that
it curves up. Insert and “snap”
the tab on the boat hook into
the slot on the side
Docking
Bay Door
Boat
Hook
of deck support G.
Medical Platform
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
• Place the stern deck on top of
deck support G so that the tab
on the top of the boat hook fits
into the slot on the stern deck.
• Push down on the stern deck
until you hear the boat hook tab
“snap” in place.
5
Stern
Deck
• Pull up on the stern deck to be
sure it is secure.
G
Boat
Hook
6
• Place the midship deck on top
of deck supports A, B, C, F
and G. Fit the tabs on top of
the deck supports into the
Midship
Deck
eight slots in the midship deck.
• Push down on the midship
deck near each slot to
B
“snap” the tabs in place.
C
Hint: It may be easier to “snap”
each tab in place if you hold the
deck support with one hand while
pushing down near the midship
deck slot with the other hand.
A
F
• Pull up on the midship deck to
be sure it is secure.
G
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
7
Bow Deck
• Place the bow deck on top of deck
supports C, D, E and F so that the
tabs on the top of supports fit into
the six slots on the bow deck.
C
• Push down on the bow deck near
each slot to “snap” the tabs in place.
D
E
Hint: It may be easier to “snap”
each tab in place if you hold the deck
support with one hand while pushing
down near the bow deck slot with the
other hand.
F
Propeller
• Pull up on the bow deck to be sure
it is secure.
• “Snap” the propeller onto the peg
at the rear of the base.
• Position the elevator column
with the ribbed side facing you.
• Position the elevator platform
with the detailed side facing up.
8
Elevator
Column
• Tip the elevator platform to fit
the tab through the slot in the
elevator column.
• Turn the elevator platform so
that the detail side faces up.
The elevator platform should
now stay in place within the
elevator column.
Elevator
Platform
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
9
Message
Center
Video
Screen
Door
• Locate one of the video
screen doors.
• Fit the lower peg on the door
into the lower hole in the
message center as shown.
• Bend the door slightly to fit the
other peg into the upper hole in
the message center.
• Repeat this procedure to attach
the other video screen door to
the message center.
Video
Screen
Door
10
• With the message center video screen
facing the deck, fit it into the raised console.
Message
Center
• Push down on the message center so both
tabs "snap" in place in the raised console.
• Pull up on the message center to be sure it
is secure.
Raised
Console
• Slide the backpack
Backpack
reader onto the
Reader
connector on the
raised console.
The backpack
reader stores here
when not in use.
Connector
Connector
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
Wheelhouse
11
• Fit the tabs on the bottom of
the wheelhouse into the slots in
the deck.
• Push down on the wheelhouse so
that its tabs "snap" in place.
Roof
Message
Center
• Pull up on the wheelhouse to be
sure it is secure.
• Position the slots in the wheelhouse
roof over the tabs on top of the
wheelhouse.
Wheelhouse
• Push down on the roof so that it
"snaps" in place on the
wheelhouse.
12
Landing Pad
• Fit the slots on the landing pad
onto the tabs on the message
center and elevator.
Message
Center
• Push down on the landing pad
near each slot to "snap" the
tabs in place.
• Pull up on the landing pad to be
sure it is secure.
Elevator
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Building the
Aquatic Rescue Command Center
™
13
“Snap” the search
light over the light
bulb on top of the
Insert and “snap”
the flag into the
hole on the
landing pad.
wheelhouse roof.
Insert and “snap” the
fuel hose into the hole
on the bow deck.
With the hook end
facing away from the
base, “snap” the crane
arm into the crane base.
Insert and “snap”
the repair wrench
into the hole in the
docking bay door.
Insert and “snap” the
rescue platform support
into the rescue platform.
Insert and “snap” the
anchor into the hole
under the bow deck.
One time assembly is now complete.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
Proper label application will help to keep the labels looking their best! When applying
labels, keep the following guidelines in mind:
• Wash you hands before applying the labels.
• Before applying the labels, wipe the surfaces of this toy with a clean, dry cloth to remove
any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied.
18
6 7
28
29
21
28
27
2
3
4
5
1
22
10
16
22
14
8
15
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Decoration
17
26
9
23
25
24
13
12
11
20
19
30
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To the Rescue
CAUTION
• Do not launch the buoy or life
preserver at close range.
• Only use the projectiles (buoy and
life preserver) supplied with this toy.
• Do not fire at people or animals.
Press
Button
Buoy
Pivoting Crane and
Rescue Platform
• Insert the peg on the bottom of crane into to
any of the holes on the ship’s deck or the
elevator platform.
Life Preserver
Launcher
Rescue Launcher
• Insert the buoy or life preserver into the slot on
the launcher.
• Press the launcher button to fire the buoy or
life preserver.
• Use the crane and rescue platform to bring
Rescue Heroes™ figures (sold separately)
equipment or sea animals aboard.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To the Rescue
Pack
Holders
Backpack Storage
Elevator
• Fit any of the equipment backpacks (sold
separately) onto the pack holders on the
elevator column.
Place a figure (sold separately) on the elevator
footpad. Grasp the edge of the platform to move it
up or down.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To the Rescue
Off
On
Helicopter Landing Pad
Power Switch
Fit the landing gear on the front of the
Rescue Heroes™ Quick Response™ Helicopter
(sold separately) under the hooks on top of the
landing pad. Press down on the back of the
landing gear to "snap" the helicopter in place.
• Locate the power switch on the back of the
message center.
• Slide the switch to the position to turn the
•
toy on. When you're finished, slide the switch
to the off
position.
NOTE: Static electricity may temporarily stop
the electronic function of this toy. For example,
walking across the rug and touching this toy or
sliding Voice Tech™ Video Cards in and out of
the message center. To reset the toy, slide the
power switch to the off position
back on again.
and then
•
Additional Storage
• Place the Voice Tech™ Video Cards, or other
accessories into the storage bin on the back of
the message center.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
It’s An Incoming Transmission
™
From Warren Waters
The Message Center on the Aquatic Rescue Command Center™ features a Virtual Video™ Screen.
Warren Waters™ addresses the Rescue Heroes™ from the screen and assigns them missions.
Three, two-sided Voice Tech™ Video Cards are included for a total of six unique missions.
Insert Voice Tech™
Video Card here.
OR
Insert a Voice Tech™
Rescue Heroes™
Talking Mission Card
Slide the Backpack reader on your figure. This
here. (Sold separately)
™
allows your figure to “talk” to Warren Waters .
Note: only insert one
type of card at a time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
It’s An Incoming Transmission
™
From Warren Waters
Right Button
• With no cards inserted – Press to see flashing
lights and hear the Rescue Heroes™ Theme Song.
™
• With Voice Tech Video Card inserted - Press
to hear a sound effect from that mission.
• With Mission Card inserted (not included)
Press to see flashing lights and hear the
Rescue Heroes Theme Song.
Bottom Button
• With no cards inserted – Press to hear and see
Warren Waters™ give general missions.
• With Voice Tech Video Card inserted - Press to hear
Warren Waters give a mission specific to that card. and
see Video of the mission on the screen. Attach the
Backpack Reader and press repeatedly to hear the figure
and Warren Waters talk to each other.
• With Mission Card inserted (not included)– Press to hear
and see Warren Waters give a mission specific to that card.
Attach the Backpack Reader and press repeatedly to hear
the figure and Warren Waters talk to each other.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not
immerse this toy.
• This toy has no consumer serviceable parts. Please do not take this toy apart.
• This toy is not designed for use in water.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user's authority to operate the equipment.
Consumer Information
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052.
For other countries, outside the United States: Canada: call 1-800-567-7724, or write to: Mattel Canada Inc,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Great Britain: telephone 01628 500303.
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Look for These Other Rescue Heroes
Products (Each Sold Separately)
www.rescueheroes.com
Jake Justice™ Jack Hammer™
77459
77458
Billy Blazes™
77457
Rocky Canyon™
77545
Wendy Waters™ Roger Houson™
77460
77546
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
© 2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc., unless other wise noted.
Printed in Mexico
78157a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
|