Fellowes Paper Shredder PS 79Ci User Manual

Usefull Phone Numbers  
PS-79Ci  
PS-79Ci  
Help Line  
Europe  
00-800-1810-1810  
+1-800-234-1185  
+1-800-955-0959  
Australia  
+1-800-33-11-77  
+1-800-665-4339  
Mexico  
Canada  
United States  
Fellowes  
Australia  
Benelux  
Canada  
+61-3-8336-9700  
+31-(0)-76-523-2090  
+1-905-475-6320  
Japan  
+81-(0)-3-5496-2401  
+82-(0)-2-3462-2844  
+60-(0)-35122-1231  
+48-(22)-771-47-40  
+65-6221-3811  
Korea  
Malaysia  
Polska  
Deutschland  
Espana  
+49-(0)-5131-49770  
+34-91-748-05-01  
+33-(0)-1-30-06-86-80  
+39-071-730041  
Singapore  
United Kingdom  
United States  
France  
+44-(0)-1302-836836  
+1-630-893-1600  
Italia  
Please read these instructions before use.  
Do not discard: keep for future reference.  
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600  
felllloowweess..ccoom  
Australia  
Benelux  
Canada  
China  
Deutscchland  
España  
France  
Italia  
Japan  
Korea  
Polska  
Singaapore  
United Kingdom  
Unitedd States  
felllloowwess..com  
2008 Fellowes, Inc. Part No. 403321  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Model PS-79Ci  
G.  
12  
KEY  
®
B.  
C.  
A. SafeSense
 
Technology  
B. Paper entry  
F.
C
asters  
G. Disconnect power switch  
H. SafeSense
 
override switch  
I. Power
 
controls  
J. Overheat (red)  
K. Bin open (red)  
L. Bin full (red)  
P.
A
uto correcting button (blue)  
Q. Reverse  
R. On/off (blue)  
S. Forward  
®
C. See safety instructions  
D. CD/Card flap  
E. Pullout bin  
M. Remove paper (red)  
®
N. SafeSense
 
indicator (yellow)  
A
UT  
TO  
O
O. Sheet capacity indicator  
CAPABILITIES  
D.  
E.  
Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips  
Maximum:  
Sheets per pass  
CDs/Cards per pass  
Paper entry width  
I.  
12*  
1*  
9” (230mm)  
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,  
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted  
above  
*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 4Amps; heavier paper, humidity  
or other than rated voltage may reduce capacity. Recommended daily usage rates:  
Paper shred size:  
Cross-Cut  
5/32” x 1-1/2” (3.9 x 38mm)  
25–50 shredding passes per day, 25 credit cards; 10 CDs.  
12 sheets per pass.  
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging  
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.  
ADVANCED PRODUCT FEATURES  
Jam Proof System  
® Technology  
Stops shredder immediately when  
hands are too close to the paper entry.  
SilentShred
Technology  
SilentShred™ noise quality  
shreds without noisy disruptions  
Eliminates frustrating jams by  
preventing overloads and powering  
through misfed paper.  
TECHNICAL EXPLANATION  
TECHNICAL EXPLANATION  
TECHNICAL EXPLANATION  
Sheet capacity indicator tells you  
when you have too many or too few  
sheets to maximize productivity  
Shredder will stop automatically and  
indicator will light up when hands  
are too close to the paper entry  
SilentShred™ motor  
features whisper-quiet,  
efficient shredding  
performance without  
the noisy disruptions  
1
F.  
Shredder will resume normal  
operation when hands are no  
longer near the paper entry  
Shredder will not operate when too many  
sheets are fed into paper entry (red  
light). Reduce sheet quantity and refeed  
1
2
Flashing indicator warns when  
SafeSense
technology has been  
shut off  
If misfed, shredder will automatically  
adjust to power through or reverse  
out paper  
®
O.  
P.  
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!  
12  
• Keep away from children and pets. Keep hands away from paper  
entry. Always set to off or unplug when not in use.  
• This shredder has a Disconnect Power Switch (G) that must be in the ON (I)  
position to operate shredder. In case of emergency, move switch to OFF (O)  
position. This action will stop shredder immediately.  
AU  
TO  
AUTO  
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away  
from shredder openings. If object enters top opening, switch to  
Reverse ( ) to back out object.  
• Avoid touching exposed cutting blades under shredder head.  
H.  
• Rotate CD flap entry for shredding CDs/cards. Keep finger away from  
CD hole. Jam Proof System is disabled when flap is in CD position.  
• Never use aerosol products, petroleum based lubricants or other flammable  
products on or near shredder. Do not use canned air on shredder.  
• Do not put foreign objects in paper entry.  
• Do not use if damaged or defective. Do not disassemble shredder. Do  
not place near or over heat source or water.  
• The grounded socket-outlet shall be installed near the equipment and shall be  
easily accessible.  
J. K. L. M. N.  
Q. R. S.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC SET UP AND SHREDDING OPERATION  
CASTER INSTALLATION  
1
3
4
5
PAPER OR CD/CARD  
1
2
4
5
6
12  
12  
12  
AU  
T
O
AUT  
O
AUT  
O
Continuous operation:  
12-minute maximum  
Plug in and put  
To shred CDs rotate  
CD flap into place  
Hold CD/card at edge,  
feed into CD/Card flap  
entry and release  
When finished  
shredding set  
Press ( ) ON to  
activate (blue)  
disconnect power  
paper entry and release  
NOTE:
Shredder runs briefly  
after each pass to clear entry.  
Continuous operation beyond  
12-minutes will trigger  
switch in ON (I) position  
to OFF (  
)
20-minute cool down period.  
JAM PROOF SYSTEM OPERATION*  
Eliminates frustrating jams by preventing overloads and powering through misfed paper.  
SET-UP AND TESTING  
MISFED PAPER  
3
3
2
2
12  
AUTO  
O
1
1
If Remove Paper icon (  
illuminated, press reverse and  
remove paper  
) is  
If too many sheets, indicator will  
light up to red and shredder will  
not take paper  
Remove several sheets until the  
indicator is below red and the  
shredder will take the paper  
Automatic correcting action  
will power through the misfed  
paper, so shredding can  
continue (do not add more  
paper during flashing)  
12  
12  
AUT  
O
AUTO  
O
Feed into paper entry  
and release  
If paper is misfed and  
stops shredding, all  
indicator lights will  
illuminate and shredder  
will pause for 3-6  
seconds  
3
2
2
3
12  
12  
AUTO  
O
AU  
TO  
Shredder will take fewer sheets,  
but if indicator is below yellow,  
you can add more sheets without  
fear of jamming  
Increase the number of sheets  
being fed up to the top yellow light  
to maximize your productivity  
If there is too much paper for  
the shredder to power through,  
it will reverse the paper out for  
easy removal  
Reduce paper quantity to an  
acceptable amount and refeed into  
paper entry  
*100% Jam Proof when used in accordance with user manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING  
ENGLISH  
Model PS-79Ci  
OILING SHREDDER  
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE  
SAFESENSE
®
TECHNOLOGY OPERATION  
3
4
3
1
2
Stops shredder immediately when hands are too close to the paper entry.  
12  
12  
AUT  
O
SET-UP AND TESTING  
FLASHING INDICATOR  
AUTO  
O
1
2
3
1
2
3
*Apply oil across entry  
Press forward  
Shred one sheet  
Press and hold forward (  
2-3 seconds  
)
2  
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250  
AU  
U  
AU  
TOO  
TO  
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could  
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.  
®
®
Turn the shredder ON  
Touch test area and  
look for the SafeSense  
indicator to illuminate  
SafeSense is active and  
working properly  
SafeSense is deactivated when  
Shift override switch to  
the “active” position,  
Confirm the indicator is no longer  
flashing and retest by putting  
your hand on the test area  
®
®
(
) to activate SafeSense  
indicator is flashing  
CLEANING AUTO-START INFRARED SENSORS  
®
reactivating SafeSense  
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run  
even if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry)  
TO CLEAN THE SENSORS  
ADVANCED PRODUCT FEATURE MAINTENANCE AND TROUBLESHOOTING  
JAM PROOF SYSTEM*  
2
3
4
5
1
12  
12  
AUT  
O
Eliminates frustrating jams by preventing overloads and powering through misfed paper.  
AU  
TO  
AU  
TO  
DISABLING THE FEATURE  
Turn off and unplug  
shredder  
Lift CD flap  
Locate Auto-start  
infared sensor  
Dip cotton swab in  
rubbing alcohol  
Using cotton swab, wipe  
away any contamination  
from the paper sensors  
3
4
3
5
2
3
1
12  
12  
12  
AU  
TO  
AUT  
O
AUT  
O
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING  
AUTO  
AUTO  
• Run shredder once a day in reverse for 15 seconds to clear cutters  
Should you choose to disable Once disabled, the blue  
If jam occurs, press and  
hold forward ( ) key until  
the document is completely  
through the shredder  
If not cleared, press  
reverse ( ) briefly  
(repeat steps 4 and 5  
until shredded)  
If steps 4 and 5 do not clear  
jam, reverse paper all the  
way out, remove several  
sheets and refeed  
Shredding can continue with  
the system disabled, however a  
paper jam may occur with too  
many sheets and Remove  
• Empty wastebasket when bin full indicator light is illuminated using bag # 36052  
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.  
the system, press and hold  
the auto button (blue) and  
reverse ( ) key at the  
same time  
Auto light is no longer  
illuminated (To re-engage,  
repeat step 1)  
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the  
problem, this model will require 20 minutes to cool down.  
Paper icon  
(
)
will illuminate  
*100% Jam Proof when used in accordance with user manual  
ACCESSORIES  
SAFESENSE
®
TECHNOLOGY  
Maintenance is an important part of protecting your investment. Don’t forget oil and shredder bags.  
Stops shredder immediately when hands are too close to the paper entry.  
®
DISABLING THE FEATURE  
3
5
1
2
4
3
6
Shredder oil – #35250  
PS-79Ci Shredder  
plastic bag – #36052  
®
Should the SafeSense  
The shredder will stop and  
SafeSense will need to  
be deactivated  
To deactivate, shift override Once deactivated, the  
To clear paper, press  
and hold forward (  
key until paper is  
shredded  
Once the paper is cleared,  
reactivate the SafeSense  
feature (To re-engage,  
see Operations)  
PROBLEM STILL NOT SOLVED?  
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step  
assistance and personal attention.  
®
®
indicator stay lit without  
touching the opening  
switch to the “not active“  
position  
indicator will flash and  
the SafeSense feature  
)
®
will not function  
www.fellowes.com features an extensive on-line support section with a number of self-service options  
• Our customer service professionals are dedicated to resolve any of your issues  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 91737945 User Manual
Curtis CRT Television TV2040 User Manual
Curtis TV DVD Combo TVD1401 User Manual
Danby Refrigerator DWC283BLS User Manual
Desa Water Heater GMP16 User Manual
Dynacord Music Mixer 1000 1600 2200 User Manual
EverFocus Board Games EQ350HQ User Manual
Fisher Power Supply FB200 2 User Manual
Geemarc Answering Machine RP7510 User Manual
Global Machinery Company Lawn Mower RLMC User Manual