XD6320
INSTALLATION/OWNERS MANUAL
AM/FM/CD Receiver with Detach Face
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 INSTALLATION
Wiring Diagram
FUSE
When replacing the fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD6320 uses one
10 amp ATM fuse located
beside the wiring connector.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
Control Locations
3
6
8
9
10
1
2
4
5
7
22
21 20 19
18
17
16
15
14
13 12 11
Release
Tuner Scan
Local/Distance
Preset 6
1
2
12
13
14
15
16
17
18
Power
Volume
3
Band/Play/Pause
Mode
Preset 5
4
Preset 4
5
Auto Store/Preset Scan
Tune/Track Down
Eject
Preset 3/Intro
Preset 2/Random
6
7
8
19 Preset 1/Repeat
20 Audio
9
Tune/Track Up
Display
10
11
21
22
Loudness
Mute
EQ
4
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
General Operation
Faceplate Removal Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Semi-permanent Remove trim ring and install supplied #1 x 7/32” Phillips
Faceplate Installation head screw through left side of mounting frame into faceplate.
Power On/Off Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
Mode Press MODE to select between tuner, CD player and auxiliary
input. Modes of operation are indicated in the display.
Loudness Press LOUD to activate and deactivate the loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Volume Adjust volume using rotary encoder (00-46).
Programmable Press and hold POWER for 3 seconds to program currently
Turn-On Volume selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve (if one is selected).
Display Press DISP to select between clock and radio frequency
(tuner mode), clock and CD track/elapsed time (CD mode), or
clock and AUX (AUX mode).
Set the Clock With the unit on, press and hold DISP until the clock begins
to flash, then release. Press TUNE
to adjust the hours
nn
and TUNE
to adjust the minutes. Press DISP
ll
momentarily to save the selected time.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
General Operation
The clock will display 12-hour AM/PM time in USA frequency
spacing mode (PM 10 00). In European frequency spacing
12/24-hour Clock
:
mode, the clock will display 24-hour time (22:00).
In tuner mode, press and hold DISP then press TUNE
to select function priority display. “FREQ” will momentarily
appear in the display.
Programmable Display
Priority
ll
Note:
"FUNC" will appear in CD or AUX modes.
Radio frequency (tuner mode), CD track/elapsed time (CD
mode) or AUX (AUX mode) will be displayed by default.
Press and hold DISP then press TUNE
to select time
nn
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency
or CD track/elapsed time accessed by pressing DISP
momentarily.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to select clock
priority on/off. “CLK ON” or “CLK OFF” will momentarily
appear in the display.
Programmable Clock
Priority
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Reset
Press and hold AUDIO for 3 seconds to turn confirmation
beep on/off.
Confirmation Beep
Mute
Press MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
General Operation
Audio Press AUDIO to select between Volume (default), Bass,
Treble, Balance & Fader.
Bass Press AUDIO until BAS appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Treble Press AUDIO until TRE appears
Rotate encoder left/right to adjust
( -6 minimum / +6 maximum)
Balance Press AUDIO until BAL appears
Rotate encoder left/right to adjust
(BAL L 12-BAL 00-BAL R 12)
BAL 00 represents equal balance
Fader Press AUDIO until FAD appears
Rotate encoder left/right to adjust
(FAD F 12-FAD 00-FAD R 12)
FAD 00 represents equal fader
Source Audio Memory Individual Bass and Treble settings are retained in memory
for AM, FM, CD, and AUX modes. This allows you to save
the Bass and Treble settings separately for each mode.
Example:
FM tuner mode can have Bass +3 and Treble -1 while CD
mode can have Bass +2 and Treble +2.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
Tuner Operation
Seek Tuning Press TUNE
or TUNE
next strong station.
momentarily to seek the
for more than 2 seconds,
nn
ll
ll
Manual Tuning Press TUNE
or TUNE
nn
then release. "MANUAL" will momentarily appear in the
display. Press TUNE
or TUNE
momentarily to
nn
ll
move radio frequency up or down one step at a time. Press
and hold to advance quickly. If tuning is not adjusted for 5
seconds, the unit will return to seek tuning mode (default).
"AUTO" will momentarily appear in the display.
Scan Tuning Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Local/Distance Press LOC to activate local tuning for strong station reception
only. Press LOC again to cancel and resume distance tuning
(default).
Band Press BAND to select between FM1, FM2, FM3, AM1 and AM2
bands.
Frequency Spacing Press and hold BAND then press TUNE
to select
nn
European frequency spacing. Press and hold BAND then
press TUNE to select USA frequency spacing (default).
ll
Storing and Recalling Up to 18 FM stations and 12 AM stations can be stored. To
Station Presets store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Press AS/PS for more than 2 seconds to automatically store
the six strongest stations in the current band. Automatic
local/distance is activated during the initial band scan.
Automatically Store
Stations
Press AS/PS for less than 2 seconds to scan presets 1-6 on
the current band, pausing for 5 seconds at each. Press
AS/PS again to cancel.
Preset Scan
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
CD Player Operation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Insert CD
Eject CD
Press EJECT to eject the CD. The unit will change to previous
mode of operation (AM, FM, or auxiliary input). If the disc is
not removed within 10 seconds, the unit will reload the disc.
The unit does not have to be turned on to eject CD.
Press TRACK
Press TRACK
track. Pressing TRACK
to skip to the beginning of the next track.
to return to the beginning of the current
Track Select
ll
nn
again skips to the beginning of
nn
the previous track.
Press and hold TRACK
or reverse a track.
or TRACK
to fast forward
Fast Forward and Reverse
ll
nn
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
Pause
Intro
l
l
Press INT to play the first 10 seconds of each track.
Press INT again to cancel.
Press RPT to continuously repeat selected track.
Press RPT again to cancel.
Repeat
Random
Press RDM to play all tracks in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between tuner, CD player and auxiliary input
modes and when the unit is turned on/off.
Some CD-Rs and CD-RWs may be incompatible with this
unit, depending on media type and recording method. In
addition, the following CDs may be incompatible with this
unit:
CD-R/CD-RW Compatibility
CDs exposed to extreme temperatures or direct sunlight for
extended periods of time, CDs recorded in which a recording
session failed or a re-recording was attempted and, or
encrypted or copy-protected CDs which do not conform to
the audio CD-DA red book recording standard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 WARRANTY
Limited One-Year Warranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
What to do?
If purchased within the USA:
1. Before you call for service, check your
operating instruction booklet. A slight adjustment
of any custom controls discussed in your
instruction booklet may save you a service call.
Dual Electronics Corp. warrants this product to the
original purchaser to be free from defects in material
and workmanship, under normal conditions, for a
period of one year from the date of the original
purchase.
2. If you require service during the warranty
period, you must carefully pack the product
(preferably in the original package) and ship it by
prepaid transportation with proof of the purchase
date from the retailer to the Return Center
address listed below.
Dual Electronics Corp. agrees, at our option, during
the warranty period, to repair any defect in material
or workmanship or to furnish an equal new or
renewed product in exchange without charges,
subject to verification of the defect or malfunction and
proof of the date of purchase.
3. Please describe your problem in writing and
include your name, a return UPS shipping
address (P.O. Box not acceptable), and a daytime
phone number with your shipment.
During the One-Year Warranty Period: For One Year
from the date of purchase, your product will be
replaced with a new, renewed or comparable product
(whichever is deemed necessary) if it becomes
defective or inoperative. This is done without charge
to you. Replacement products are warranted for the
balance of the original warranty period.
4. DUAL will pay the return shipping charges if
the product is returned to an address within the
48 contiguous states.
Dual Electronics Corp.
Attn: Returns Center
21318 64th Ave. South
Kent, WA 98032 U.S.A.
Toll Free: 1-866-626-7863
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A.
What is covered? This warranty covers all defects in
material and workmanship in this product. The
following are not covered: installation/removal costs,
damage resulting from accident, misuse, abuse,
neglect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product, or
damage occurring during return shipment of the
product.
If purchased outside the USA:
Please return the unit to original place of purchase
for warranty service.
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation the
implied warranties of merchantability and fitness for
a particular purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether or not
arising from the company’s negligence, actual or
imputed. No person or representative is authorized to
assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 OPERATION
Specifications
CD Player Signal-to-noise: >92dB
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1 Bit
FM Tuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
General Total power output: 200 Watts Peak
Power output: 50Wx4 @ 4 ohms, 14.4 VDC
Operating voltage: 11-16 VDC, negative ground
Speaker output impedance: 4~8 ohms
Line output voltage: 2 Volts
Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)
Design and specifications subject to change without notice.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XD6320 WARRANTY
Troubleshooting
Problem
Cause
Action
Yellow wire not connected or incorrect voltage Check connections for proper voltage
Unit will not turn on
(no power)
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
(11~16VDC)
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unit has power
(but no sound)
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Unit blows fuses
Unit is not mounted correctly or backstrap is Check mounting sleeve and backstrap
not secure support
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches
Excessive skipping
Disc read error
Press eject or RESET
ERROR-01 appears
on display
Focus error or disc is in upside down
CD mechanism position out of alignment
CD transit screws still in place
Press eject or RESET
ERROR-02 appears
on display
Press EJECT for 3 seconds to reset
CD mechanism position
Remove 2 transit screws located on top
of the unit
Unit will not accept
a disc
Dual Electronics Corp.
21318 64th Ave. South
Kent, WA 98032
Toll Free: 1-866-626-7863
©2005 Dual Electronics Corp. All rights reserved.
NSA0205-V01
Download from Www.Somanuals.com. All Manuals Search And Download.
|