Cub Cadet Lawn Mower 19A40002100 User Manual

Op e r a t O r s Ma n u a l  
Triple Rear Bagger — 19A40002100  
WARNING  
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL  
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.  
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.  
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019  
Printed In USA  
Form No. 769-04626C  
(February 24, 2010)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safe Operation Practices  
2
WARNING! This symbol points out important safety instructions which, if not followed,  
could endanger the personal safety and/or property of yourself and others. Read and follow  
all instructions in this manual before attempting to operate this machine. Failure to comply  
with these instructions may result in personal injury.  
When you see this symbol. HEED ITS WARNING!  
DANGER! This attachment was built to be used according to the safe operation practices in  
this manual. Carelessness or error on the part of the operator can result in serious injury.  
Mowers are capable of amputating hands and feet and throwing objects. Failure to observe  
the following safety instructions as well as the instructions provided with your mower, could  
result in serious injury or death.  
9.  
Disengage blade(s), set parking brake, stop engine and wait  
until the blade(s) come to a complete stop before opening  
bagger attachment’s top cover, removing grass catcher,  
emptying grass, unclogging chute, removing any grass or  
debris, or making any adjustments.  
General Operation  
1.  
Read, understand, and follow all instructions on your  
equipment and in their manuals before attempting to  
assemble and operate. Keep this manual in a safe place for  
future and regular reference and for ordering replacement  
parts.  
10. Never leave a running machine unattended. Always turn  
off blade(s), place transmission in neutral, set parking  
brake, stop engine and remove key before dismounting.  
2.  
To help avoid blade contact or a thrown object injury, keep  
bystanders, helpers, children and pets at least 75 feet from  
the mower while it is in operation. Stop machine if anyone  
enters the area.  
11. Your machine is designed to cut normal residential grass of  
a height no more than 10”. Do not attempt to mow through  
unusually tall, dry grass (e.g., pasture) or piles of dry leaves.  
Dry grass or leaves may contact the engine exhaust and/  
or build up on the mower deck presenting a potential fire  
hazard.  
3.  
Thoroughly inspect the area where the equipment is to be  
used. Remove all stones, sticks, wire, bones, toys, and other  
foreign objects which could be picked up and thrown by  
the blade(s). Thrown objects can cause serious personal  
injury.  
12. If situations occur which are not covered in this manual, use  
care and good judgment. Contact your customer service  
representative for assistance.  
4.  
5.  
Always wear safety glasses or safety goggles during  
operation and while performing an adjustment or repair  
to protect your eyes. Thrown objects which ricochet can  
cause serious injury to the eyes.  
Slope Operation  
Slopes are a major factor related to loss of control and tip-over  
accidents which can result in severe injury or death. Attachments  
can also affect the stability of the machine. All slopes require  
extra caution.  
Do not operate the mower without the discharge cover  
or entire grass catcher in its proper place. A missing  
or damaged discharge cover or grass bag attachment  
component may result in thrown objects or blade contact  
injuries.  
For your safety, use the slope gauge included as part of this  
manual to estimate the angle of slopes before operating this  
machine on a sloped or hilly area. If the slope is greater than 10  
degrees as shown on the slope gauge, do not operate the mower  
with the grass bag attachment installed on that area or serious  
injury could result.  
6.  
7.  
Do not put hands or feet near rotating parts or under the  
cutting deck. Contact with the blade(s) can amputate  
hands and feet.  
Shut off mower’s engine and wait for blades to come to  
a complete stop before unclogging mower’s discharge  
opening or bagger parts.  
Do:  
1.  
Mow up and down slopes, not across. Exercise extreme  
caution when changing direction on slopes.  
8.  
Slow down before turning. Operate the machine smoothly.  
Avoid erratic operation and excessive speed. Be aware  
that a grass catcher attachment can affect the handling  
characteristics of your mower.  
2.  
Watch for holes, ruts, bumps, rocks, or other hidden  
objects. Uneven terrain could overturn the machine. Tall  
grass can hide obstacles.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.  
Use slow speed. Choose a low enough speed setting so  
that you will not have to stop or shift while on the slope.  
Tires may lose traction on slopes even though the brakes  
are functioning properly. Always keep machine in gear  
when going down slopes to take advantage of engine  
braking action.  
General Service  
1.  
Before cleaning, repairing, or inspecting, make certain the  
blade(s) and all moving parts have stopped. Disconnect the  
spark plug wire and ground against the engine to prevent  
unintended starting.  
2.  
Keep all nuts, bolts, and screws tight to be sure the  
equipment is in safe working condition.  
4.  
5.  
Follow the manufacturer’s recommendations for wheel  
weights or counterweights to improve stability.  
3.  
Never tamper with your mower’s safety interlock system  
or other safety devices. Check their proper operation  
regularly.  
Keep all movement on the slopes slow and gradual. Do  
not make sudden changes in speed or direction. Rapid  
engagement or braking could cause the front of the  
machine to lift and rapidly flip over backwards which could  
cause serious injury.  
4.  
5.  
Never attempt to make adjustments or repairs while the  
mower’s engine is running.  
Grass catcher components and the discharge cover are  
subject to wear and damage which could expose moving  
parts or allow objects to be thrown. For safety protection,  
frequently check components and replace immediately  
with original equipment manufacturer’s (O.E.M.) parts only,  
listed in this manual. Use of parts which do not meet the  
original equipment specifications may lead to improper  
performance and compromise safety!  
6.  
Avoid starting or stopping on a slope. If tires lose traction,  
disengage the blade(s) and proceed slowly straight down  
the slope.  
Do Not:  
1.  
Do not turn on slopes unless necessary; then, turn slowly  
and gradually downhill, if possible.  
2.  
Do not mow near drop-offs, ditches or embankments. The  
mower could suddenly turn over if a wheel is over the edge  
of a cliff, ditch, or if an edge caves in.  
6.  
Maintain or replace safety and instruction labels, as  
necessary.  
3.  
Do not try to stabilize the machine by putting your foot on  
the ground.  
4.  
5.  
Do not use a grass catcher on steep slopes.  
Do not mow on wet grass. Reduced traction could cause  
sliding.  
Safety Symbols  
This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the  
machine before attempting to assemble and operate.  
Symbol  
Description  
READ THE OPERATOR’S MANUAL(S)  
Read, understand, and follow all instructions in the manual(s) before attempting to  
assemble and operate  
STOP  
Turn off the engine before opening the bagger cover.  
WARNING! Your Responsibility—Restrict the use of this power machine to persons who read, understand and  
follow the warnings and instructions in this manual and on the machine.  
SAVE THESE INSTRUCTIONS!  
4
se c t i O n 2 — iM p O r t a n t sa f e Op e r a t iO n pr a c t ic e s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
se c t i O n 2 — iM p O r t a n t sa f e Op e r a t iO n pr a c t ic e s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Contents of Carton  
3
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below  
and shown in Fig. 3-1. Three hardware packs are included in this kit and are detailed on the following page.  
Hinge Cover Pin  
Bagging Blades (6 blades total)  
Two Deck Baffles  
Chute Discharge Plate  
Chute Stop Bracket  
Hitch Bracket Kit (3 Pcs. & Hardware Pack)  
Chute Tube Extension  
Discharge Chute Elbow  
Hitch Support  
Grass Catcher Cover Screen  
Grass Catcher Cover  
Three Grass Bag Assemblies  
Upper Chute Tube  
Upper Chute Support  
Upright Support  
Bag Support Assembly  
Three Hardware Packs (Detailed & illustrated on next page)  
Hitch Bracket Kit  
(3 Pcs. & Hardware)  
Figure 3-1  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS OF HARDWARE PACK  
This grass collector kit is shipped with three loose hardware packs enclosed and one set of hardware included in the mounting bracket kit.  
Please check your hardware packs against the illustrations below. The quantities for each item is listed in parenthesis.  
Hardware included with 689-00096  
Hardware Pack 689-00163  
(3)  
(1)  
(1)  
712-04065  
710-3008  
710-0276  
(3)  
(2)  
712-04064  
712-04063  
(2)  
Hardware Pack 689-00087  
(1)  
726-3046  
(4)  
(3)  
710-3008  
711-0309A  
(4)  
710-3015  
(1)  
712-04063  
(2)  
714-0117  
710-04484  
723-0476  
(1)  
(3)  
710-3168  
se c t i O n 3 — cO n t e n t s O f ca r t O n  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Assembly & Installation  
3
NOTE: References to left, right, front and rear of the tractor are  
from the operator’s position, unless otherwise stated.  
Before assembly, place the tractor on a firm, level surface,  
disengage the PTO, stop the tractor engine and set the  
parking brake.  
For convenience, pivot the seat forward and leave it in  
that position until the grass collector is fully mounted and  
assembled.  
Assemble Mounting Brackets  
To assemble the bagger mounting assembly, locate the  
mounting assembly pack and follow these steps:  
1.  
Attach the two hitch side brackets to the universal rear  
attachment bracket using four hex bolts and flange lock  
nuts. With the hooks on the hitch side brackets pointing  
down, the tabs on the hitch plates should be pointing  
upwards. See Fig. 4-1.  
Side View  
Figure 4-2  
Assembling The Support Assembly  
Locate the upright support bracket and the bag support  
assembly. Assemble it by following these steps:  
1.  
Lay the bag support assembly topside down with the  
mounting bracket portion facing upwards.  
2.  
Insert the notched end of the vertical support bracket into the  
bag support assembly, as in Fig. 4-3, and secure with a 5/16-18  
carriage bolt and 5/16-18 flange lock nut. See Fig. 4-4.  
Figure 4-1  
2.  
Flip over assembly and mount the hitch support bracket to  
the mounting assembly using the hardware found in pack  
689-00087. See Fig. 4-2.  
Note: It might be easier during the mounting stage to  
leave this hardware only finger tight to facilitate lining up  
the hitch hole for the clevis pin. You will be instructed to  
tighten this hardware later in this manual.  
Figure 4-3  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The clevis pin can be fed down through the hitch  
plate and secured underneath with the hairpin clip, or it  
may be easier to feed the clevis pin up through the hitch  
plate hole and secure with the hairpin clip on the topside.  
The latter method may be preferred since it can be easier  
to insert the hairpin clip. Either way will work, the decision  
should be based on operator preference.  
Figure 4-4  
Align hole on bracket  
with hole on tractor  
Mount Assembly on Tractor  
Install mounting assembly on tractor as follows:  
1.  
Place the hooked ends of the mounting assembly over  
the shoulder bolts, as in Fig. 4-5, on the tractor and line up  
the hitch support bracket center hole with the hole on the  
tractor’s hitch.  
Figure 4-6  
Note: If you decided to leave the hitch support only  
finger tight during the assembly process, tighten all of the  
hardware securely at this time.  
3.  
Install the bagger hanger assembly onto the mounting  
assembly on the tractor by hooking it over the hitch plate  
in the center, lining up the center mounting hole as seen in  
Fig. 4-7.  
Figure 4-5  
2.  
Install the clevis pin from hardware pack 689-00087 into the  
tractor’s hitch and secure with a hairpin clip inserted into the  
top hole, which is the hole located closest to the head of the  
clevis pin. See Fig. 4-6.  
Mounting Hole  
Figure 4-7  
4.  
Secure the hanger assembly to the mounting assembly  
using a 5/16” bolt and flange nut provided. See Fig. 4-7.  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling Remaining Bagger Components  
Now that the mounting brackets are assembled and are in place  
on the tractor, follow these steps to assemble the remaining  
bagger components.  
1.  
Snap the plastic upper chute support in place by first  
clipping the side portion onto the bagger support rail (1)  
with the edge of the snap feature aligned with the red line,  
as seen in the inset of Fig. 4-8.  
2.  
Snap the front side of the chute support to the rail (2), as  
shown in Fig. 4-8.  
2
1
Make sure screen sits under the cover’s lip  
Figure 4-10  
5.  
Install the bagger cover onto the bag support assembly, as  
seen in Fig. 4-11. The plastic cover goes inside of the two  
mounting tabs.  
Figure 4-8  
3.  
Install the bagger screen into the bagger cover by first  
inserting the end closest to the center into the cutout  
mounting hole, as in Fig. 4-9. Make sure to feed the screen  
under the lip, as in Fig. 4-10.  
Cover mounts in  
between these  
two tabs  
Figure 4-11  
Figure 4-9  
4.  
Clip in the other side by flexing the screen and pushing it  
down into the provided cutout hole. See Fig. 4-10.  
10  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
Slide the hinge pin into the hole located on the mounting  
tab, as in Fig. 4-12. Use the cut-out window (See inset in  
Fig. 4-12) to line up the hinge pin on the other side and  
push pin all the way in until it reaches the end-stop. At this  
point the pin clips into place and is secured by a tab in the  
bagger cover. See Fig. 4-13.  
7.  
Open Hood by pushing in on the rear, right-side tab with  
your right hand, as seen in 1 of Fig. 4-14, and lifting the cover  
with your left hand in the center rear of the bagger cover, 2.  
2
1
Figure 4-14  
8.  
Install the bag assemblies onto the bag support brackets  
by inserting the front edge in first, as seen in Fig. 4-15, and  
setting the back edge down until it fits into the assembly.  
Figure 4-12  
1
2
Figure 4-13  
Figure 4-15  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
Move the wood block to either the left or right blade for  
stabilization and remove and replace the center blade so  
that side of the blade with part number faces the ground  
when the mower is in the operating position.  
Attaching Blades  
WARNING! Always protect your hands while  
servicing blades by wearing heavy work gloves or  
using heavy rags.  
NOTE: Save the three blades you just removed to use as  
replacements or to reinstall on the blade spindles when not  
using the bagger kit.  
NOTE: High-lift bagging blades are included in the grass-catcher  
kit. Replace the blades with these new blades and save the  
existing blades as replacements or to reinstall on the blade  
spindles when not using the bagger kit.  
Installing the Deck Baffle  
Note: If the deck is still flipped upside down with the blades  
exposed, it may be easiest to flip the deck back over to complete the  
following installation of the deck baffle and chute stop bracket.  
1.  
Remove cutting deck from beneath the tractor following  
instructions for Deck Removal in operator’s manual of the  
tractor. Gently flip the deck over to expose its underside.  
1.  
Remove two of the self-tapping deck screws on the front  
right side of your deck.  
2.  
Place a block of wood between the center deck housing  
baffle and the cutting blade to act as a stabilizer. See  
Fig. 4-16.  
2.  
Install the front deck baffle using the hardware pack 689-  
00163 included with this bagger kit. See Fig. 4-17.  
Wood Block  
Note: This bagger kit includes two deck baffles, one baffle is  
for the 50” deck and the other is for a 54” deck. Based on the  
deck that you have, install one of the following baffles using the  
directed hardware. The baffles may be identified by looking at  
the parts list on Page 16:  
Hex Flange Nut  
50” Mowing Deck, install deck baffle Part No. 703-05783  
using two 710-3015 1/4-20 hex bolts and 712-04064 1/4-20  
flange lock nuts.  
54” Mowing Deck, install deck baffle Part No. 703-06018A  
using two 710-04484 self-tap hex bolts.  
Hex Nut  
Spindle Assembly  
Figure 4-16  
Deck Baffle  
3.  
Use a 15/16” wrench to remove the hex flange nut that  
secures the blades to the blade spindle assemblies. See  
Fig. 4-16.  
WARNING! The hex flange nut has a right-handed  
thread pattern. Do not attempt to force the nut in  
wrong direction; it may damage the nut and create a  
safety hazard.  
Hex Bolt  
50” Deck  
4.  
Place a new blade on each spindle so that side of the blade  
with part number faces the ground when the mower is in  
the operating position.  
54” Deck  
Figure 4-17  
Note: This bagger kit includes two sets of blades, one set is  
for the 50” deck and the other is for the 54” deck. Based on  
the deck that you have, install one of the following blade  
sets. The blades can be identified by the part number  
stamped on each blade:  
• 50” Mowing Deck, install Part No. 742-04056C  
• 54” Mowing Deck, install Part No. 742-0679  
5.  
Secure with the hex flange nut removed earlier. Use a  
torque wrench to tighten the hex flange nut between 70 to  
90 foot-pounds.  
12  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: An extra carriage bolt and lock nut have been  
supplied in your bagger kit in hardware pack 689-00163.  
You may replace the old hardware for the chute stop  
bracket with this new hardware, or save for later use.  
Installing the Chute Discharge Plate  
1.  
2.  
3.  
Remove the discharge chute by removing the two flange  
lock nuts securing it.  
With a hammer, lightly tap the bolts out. Discard the bolts  
and flange lock nuts.  
NOTE: This chute stop bracket may stay on the unit even  
when the bagger is not being used.  
Install the chute discharge plate to the bottom side of the  
deck opening, as seen in Fig. 4-18, using two carriage bolts  
supplied in hardware pack 689-00163.  
Installing the Chute Strap on the Discharge Chute  
Secure the strap to the chute with the hex screw (710-3015) and  
flange nut (712-04064) provided In Hardware pack 689-00163.  
See Fig. 20.  
Figure 4-18  
4.  
5.  
Replace the discharge chute and secure with two flange  
lock nuts included in the hardware pack 689-00163.  
Securely tighten the hardware at this time.  
Figure 4-20  
Attaching Chute Stop Bracket  
Installing the Discharge Chute  
1.  
Remove the carriage bolt and lock nut holding the chute stop  
to the deck. See the left Inset of Fig. 4-19. Save the hardware.  
1.  
Reinstall the cutting deck to the tractor reversing the  
instructions for Deck Removal in operator’s manual of the  
tractor.  
2.  
Raise the deck to its highest position.  
3.  
Raise the chute deflector (A in Fig. 4-21) on the deck and  
hold it while you position the discharge chute over the  
chute opening.  
4.  
Insert the hinge pin of the discharge chute into the tube on  
the chute stop bracket. See B in Fig. 4-21.  
A
C
Figure 4-19  
2.  
Install the new chute stop bracket, from the loose parts, at  
the same position on the deck. See the right Inset of Fig.  
4-19. Secure with the hardware removed earlier.  
B
Figure 4-21  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.  
6.  
Rotate the chute around the deck so that its front edge fits  
snugly into the deck opening. Lower the chute deflector  
slowly (C in Fig. 4-21).  
8.  
Peel the backing off of the self-adhesive foam strip (721-  
04388) that has been included with your grass collector.  
Apply it to the upper chute, flush against the flange as  
shown in Fig. 24.  
Attach the retainer strap on the discharge chute to the  
retainer clip on the deck. Refer to Fig. 4-22.  
Flange  
Figure 4-22  
Figure 4-24  
Note: For the chute elbow to be properly installed, the bottom  
edge must fall below the bottom of the deck opening and the  
tab on top of the elbow should rest above the deck opening.  
9.  
With the bagger cover open, install the upper chute over  
the chute adapter, and rest the top so that the chute  
support sits in the upper chute groove. See Fig. 4-25.  
7.  
Install the chute adapter onto the chute elbow by lining up  
the tabs and sliding the adapter over the chute elbow, as in  
Fig. 4-23. Secure the chute adapter by installing two ratchet  
clips (726-3046), included in hardware pack 689-00163, into  
the holes provided.  
Note: Make sure to align the upper chute with the ridges  
on the bagger support bracket, as shown in the inset of  
Fig. 4-25.  
Figure 4-25  
Figure 4-23  
14  
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
5
3.  
Remove the grass bags, as shown in Fig. 5-2, by lifting each  
bag up (1) and moving the bags away from the bag support  
assembly (2).  
Bagger Usage  
NOTE: When all of the grass bags are full, place the tractor on a  
firm, level surface, disengage the PTO, turn the tractor engine off  
and set the parking brake.  
1.  
Flip Seat up.  
2.  
Lift up grass bag cover by pushing in on the rear, right-side  
tab with your right hand, as seen in 1 of Fig. 5-1, and lifting  
the cover with your left hand in the center rear of the bagger  
cover, 2. Do not remove the chute tube assembly from the  
tractor.  
2
1
2
Figure 5-2  
4.  
5.  
Empty the grass clippings at a proper disposal sight, use  
the handle at the bottom of each grass bag. Holding the  
bag firmly, empty the contents  
1
Replace the grass bags in the reverse order and in the same  
orientation in which they were removed, close lid, flip  
down seat, restart your tractor and resume cutting your  
grass.  
Figure 5-1  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19A40002100 Parts List  
A
17  
2
5
18  
16  
12  
19  
22  
8
4
20  
21  
13  
32  
11  
6
12  
A
5
9
35  
10  
3
12  
6
24  
15  
6
7
27  
12  
24  
30  
23  
25  
28  
34  
26  
23  
21  
31  
22  
29  
14  
1
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ref.  
Part Number  
Description  
1.  
931-04291  
931-04298  
731-06497  
731-06504  
710-0276  
Upper Chute Assembly  
2.  
Triple Bagger Cover Assembly  
Upper Chute Support  
3.  
4.  
Bagger Cover Screen  
5.  
Carriage Screw, 5/16-18 x 1.00”  
Hex Head Screw, 5/16-18 x .75”  
Clevis Pin, .62” Dia.  
6.  
710-3008  
7.  
711- 0309A  
964-04090A  
683-04498A  
683-04519  
711-05079  
712-04063  
735-0246A  
631-04493  
683-0617A-0637  
N/A*  
8.  
Grass-bag Assembly  
9.  
Triple Bag Support Assembly  
Vertical Support Bracket  
Cover Hinge Pin  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
27.  
28.  
29.  
30.  
31.  
32.  
33.  
34.  
35.  
Flange Lock Nut, 5/16-18  
End Plug  
Discharge Chute Elbow, 50/54” Deck  
Chute Stop-Bracket  
Hitch Bracket, RH  
N/A*  
Universal Rear Attachment Bracket  
Hitch Bracket, LH  
N/A*  
703-05783-0637  
703-06018A-0637  
710-3015  
Deck Baffle, 50”  
Deck Baffle, 54”  
Tap Screw, 1/4 - 20 x .750 (50” Deck)  
Flange Lock Nut, 1/4 - 20 (50” Deck)  
Carriage Screw, 3/8 - 16 x 1.00”  
Flange Lock Nut, 3/8 - 16  
Internal Cotter Pin, .148 x 3.00  
Ratchet Clip, .250  
712-04064  
710-3168  
712-04065  
714 - 0117  
726-3046  
731- 06611  
942-0679  
Bagger Chute Adapter, 7 In.  
Blade, 18.50 Lg., High Lift  
Blade, 17.90 Lg., Star Bagging  
Universal Bracket Support, RT-99/LT-5  
Chute Strap  
742-04056C-0637  
783-05887-0637  
723-0476  
710-04484  
689-00101  
783-06694  
721-04388  
Tap Screw, 5/16-18 x .750 (54” Deck)  
Mounting Bracket Kit (Incl. Ref. 16-18)  
Discharge Chute Plate  
Adhesive Foam Strip  
*Order Reference No. 33  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUB CADET LLC  
MANUFACTURER’S LIMITED WARRANTY  
FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES  
IMPORTANT: To obtain warranty coverage owner may be required  
a. Routine maintenance items such as lubricants, filters, blade  
sharpening, tune-ups, brake adjustments, clutch adjustments, deck  
adjustments, and normal deterioration of the exterior finish due to  
use or exposure.  
to present an original proof of purchase and applicable maintenance  
records to the servicing dealer. Please see the operator’s manual for  
information on required maintenance and service intervals.  
The limited warranty set forth below is given by Cub Cadet LLC with  
respect to new merchandise purchased or leased and used in the United  
States and/or its territories and possessions, and by MTD Products  
Limited with respect to new merchandise purchased or leased and  
used in Canada and/or its territories and possessions (either entity  
respectively, “Cub Cadet”).  
b. Service completed by someone other than an authorized service  
dealer.  
c. Cub Cadet does not extend any warranty for products sold or  
exported outside of the United States and/or Canada, and their  
respective possessions and territories, except those sold through  
Cub Cadet’s authorized channels of export distribution.  
Cub Cadet warrants this product (excluding its Normal Wear Parts,  
as described below) against defects in material and workmanship for  
a period of two (2) years commencing on the date of original retail  
purchase or lease and will, at its option, repair or replace, free of charge,  
any part found to be defective in materials or workmanship.  
d. Replacement parts and\or accessories that are not genuine Cub  
Cadet parts.  
e. Transportation charges and service calls.  
f. Commercial or Institutional Use.  
Normal Wear Parts are warranted to be free from defects in material and  
workmanship for a period of thirty (30) days from the date of original  
purchase or lease. Normal wear parts include, but are not limited to  
items such as: belts, blades, blade adapters, grass bags, rider deck  
wheels, seats, and tires.  
There are no implied warranties, including without limitation any  
implied warranty of merchantability or fitness for a particular  
purpose. No warranties shall apply after the applicable period of  
express written warranty above. No other express warranties beyond  
those mentioned above, given by any person or entity, including a  
dealer or retailer, with respect to any product, shall bind Cub Cadet.  
The exclusive remedy is repair or replacement of the product as  
set forth above. The terms of this warranty provide the sole and  
exclusive remedy arising from the sale and/or lease of the products  
covered hereby. Cub Cadet shall not be liable for any incidental or  
consequential loss or damage including, without limitation, expenses  
incurred for substitute or replacement lawn care services or for  
rental expenses to temporarily replace a warranted product.  
This limited warranty shall only apply if this product has been operated  
and maintained in accordance with the Operator’s Manual furnished  
with the product, and has not been subject to misuse, abuse, neglect,  
accident, improper maintenance, alteration, vandalism, theft, fire, water,  
or damage because of other peril or natural disaster. Damage resulting  
from the installation or use of any part, accessory or attachment not  
approved by Cub Cadet for use with the product(s) covered by this  
manual will void your warranty as to any resulting damage. In addition,  
Cub Cadet may deny warranty coverage if the hour meter, or any part  
thereof, is altered, modified, disconnected or otherwise tampered with.  
Some jurisdictions do not allow the exclusion or limitation of incidental  
or consequential damages, or limitations on how long an implied  
warranty lasts, so the above exclusions or limitations may not apply to  
you.  
HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF  
OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through  
your local authorized service dealer. To locate the dealer in your area:  
In no event shall recovery of any kind be greater than the amount of the  
purchase price of the product sold. Alteration of safety features of the  
product shall void this warranty. You assume the risk and liability for  
loss, damage, or injury to you and your property and/or to others and  
their property arising out of the misuse or inability to use the product.  
In the U.S.A.:  
Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,  
Cleveland, Ohio 44136-0019, call 1-877-282- 8684  
This limited warranty shall not extend to anyone other than the original  
purchaser or to the person for whom it was purchased as a gift.  
In Canada:  
Contact MTD Products Limited, Kitchener, ON N2G 4J1, call 1-800-668-  
HOW LOCAL LAWS RELATE TO THIS WARRANTY: This limited warranty  
gives you specific legal rights, and you may also have other rights that  
vary in different jurisdictions.  
Without limiting the foregoing, this limited warranty does not provide  
coverage in the following cases:  
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684  
MTD Products Limited, Kitchener, ON N2G 4J1, Phone: 1-800-668-1238  
GDOC-100177 REV. A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cooper Bussmann TV Receiver BU 905U L R User Manual
Cuisinart Toaster CPT 120 User Manual
Cuisinart Waffle Iron WAF 6 User Manual
Cypress Computer Hardware CY7C604XX User Manual
Cypress Computer Hardware CY8C24123 User Manual
DLS Svenska AB Speaker NOBELIUM 10 User Manual
Euro Pro Iron G6118 User Manual
EverFocus Camcorder EBD331e User Manual
FEIN Power Tools Grinder WSG 12 70E User Manual
Freecom Technologies Computer Drive Hard Drive Dock User Manual