Craftsman Lawn Sweeper 486242112 User Manual

Owner's Manual  
®
42" HIGH PERFORMANCE  
LAWNSWEEPER  
Model No. 486.242112  
• Safety  
CAUTION:  
Before using this product, read this  
manual and follow all Safety Rules  
and Operating Instructions.  
• Assembly  
• Operation  
• Maintenance  
• Parts  
IMPORTANT - READ THIS FIRST!!!  
For Missing Parts or Assembly Questions  
Please Call 866-576-8388  
Mon.-Fri. 7 am - 5 pm CST.  
FAX 217-728-2032 or e-mail [email protected]  
Missing parts will be sent UPS in 24 hours directly to your home.  
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.  
FORM NO. 49535 (REV. 1/05)  
PRINTED IN U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE PACKAGE CONTENTS  
SHOWN FULL SIZE  
G
E
F
A
B
C
D
I
H
J
M
N
O
K
L
NOT SHOWN FULL SIZE  
S
R
Q
P
REF. QTY. DESCRIPTION  
REF. QTY. DESCRIPTION  
A
B
C
D
E
F
G
H
I
2
2
4
1
8
2
1
1
1
Hex Bolt, 5/16-18 x 3" Lg.  
Hex Bolt, 5/16-18 x 2-1/2" Lg.  
Hex Bolt, 5/16-18 x 1-3/4" Lg.  
Carriage Bolt, 5/16-18 x 1" Lg.  
Nylock Nut, 5/16"  
J
K
L
M
N
O
P
Q
R
S
2
1
6
2
2
2
2
4
1
1
Hitch Spacer, 3/4"  
Hairpin Cotter, 1/8"  
Hairpin Cotter, 3/32"  
Clevis Pin, 3/8" x 1/2"  
Clevis Pin, 1/4" x 1-1/8"  
Clevis Pin, 1/4" x 1-3/4"  
Vinyl Cap  
Plastic Plug  
Grip  
Knob, Plastic  
Palnut, 3/8"  
Flat Washer, 5/16" Standard  
Washer, Tooth Lock 5/16"  
Spacer Bushing,  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
CARTON CONTENTS (Loose Parts in Carton)  
9. Rope  
10. Hopper Bag  
1. Sweeper Housing Assembly  
2. Bag Arm Tube (2)  
11. Rear Hopper Tube (2)  
12. Upper Hopper Tube (2)  
13. Lower Hopper Tube (2)  
14. Hopper Bag Pivot Rod  
15. Hopper Support Rod (2)  
16. Bag Frame Strap  
3. Hitch Tube, L.H. (Left Hand)  
4. Hitch Bracket Assembly  
5. Hitch Bracket, Bent  
6. Height Adjustment Strap  
7. Height Adjustment Handle  
8. Hitch Tube, R.H. (Right Hand)  
11  
12  
14  
12  
11  
2
16  
1
13  
15  
8
13  
10  
7
2
6
9
4
3
5
CARTON CONTENTS  
TOOLS REQUIRED FOR ASSEMBLY  
STEP 1 - REMOVE PARTS FROM CARTON  
To protect painted parts, lay them on cardboard or a  
mat.  
(1) Pliers  
(1) Screwdriver  
(1) Hammer  
Remove the sweeper housing, the loose parts and the  
hardware package from the carton. Lay out the parts  
and hardware as shown on pages 3 and 4.  
(1) Adjustable Wrench  
(1) 1/2" Open End or Box End Wrench  
(1) 3/8" Open End or Box End Wrench  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 2 - ASSEMBLE HITCH TUBES  
STEP 5 - MEASURE TRACTOR HITCH  
The hitch tubes are stamped with a "77L" for the  
left tube and a "76R" for the right tube. The sweeper  
housing is marked with and "L" on the left with side  
and an "R" on the right side. See figure 1.  
Use the mark beside this paragraph to measure the  
height of the tractor hitch. The mark is 10" from the  
bottom of the page. If the tractor hitch is less than 10"  
above the ground, go to STEP 6a. If the tractor hitch  
is 10" or more above the ground, go to STEP 6b  
10"  
Hold the left hitch tube against the left side of the  
sweeper so that the "77L" on the tube faces away from  
the sweeper. Attach the hitch tube using two hex bolts  
(C) and nylock nuts (E). Repeat for the right hitch tube,  
but with the "76R" facing in toward the right side of the  
sweeper. Do not tighten yet. See figure 1.  
STEP 6a - ASSEMBLE HITCH BRACKETS  
If the tractor hitch is less than 10" above the ground,  
place the bent hitch bracket underneath the hitch  
tubes and place the hitch bracket assembly on top of  
the hitch tubes. Insert two hex bolts (B) through the  
brackets, with the rear hex bolt between the cross  
bolts in the hitch tubes. Secure the hex bolts (B) with  
two nylock nuts (E). See figure 3. Do not tighten yet.  
Assemble the two spacers (J) onto the hitch pin and  
secure the pin with the hairpin cotter (K). See figure 3.  
STEP 3 - REMOVE PLASTIC TIE  
Remove the plastic tie that fastens the height  
adjustment tube to the front of the sweeper housing.  
See figure 1.  
HEX BOLTS (B)  
NYLOCK NUT (E)  
HEX BOLT (C)  
HITCH BRACKET  
ASSEMBLY  
HOUSING  
MARKED “L”  
PLASTIC TIE  
SPACERS (J)  
BENT HITCH  
TUBE  
MARKED  
“77L”  
NYLOCK NUTS (E)  
BRACKET  
HITCH TUBE (L.H.)  
HAIRPIN COTTER (K)  
FIGURE 3  
FIGURE 1  
STEP 6b - ASSEMBLE HITCH BRACKETS  
STEP 4 - ASSEMBLE HEIGHT ADJ. STRAP  
If the tractor hitch is 10" or more above the ground,  
place the bent hitch bracket on top of the hitch tubes  
and place the hitch bracket assembly underneath  
the hitch tubes. Insert two hex bolts (B) through the  
brackets, with the rear hex bolt between the cross  
bolts in the hitch tubes. Secure the hex bolts (B) with  
two nylock nuts (E). See figure 4. Do not tighten yet.  
Assemble the two spacers (J) onto the hitch pin and  
secure the pin with the hairpin cotter (K). See figure 4.  
Place the spacer bushing (I) into the hole in the  
height adjustment strap. Place the strap and bushing  
between the hitch tubes, aligning them with the rear  
hole. Fasten the hitch tubes together, with the strap  
and bushing between them, using two hex bolts (A)  
and nylock nuts (E). Do not tighten yet. See figure 2.  
HEX BOLT (A)  
HEX BOLTS (B)  
HEIGHT  
ADJUSTMENT  
STRAP  
HAIRPIN  
COTTER (K)  
SPACER  
BUSHING (I)  
BENT HITCH  
BRACKET  
SPACERS (J)  
HITCH BRACKET  
ASSEMBLY  
NYLOCK NUT (E)  
NYLOCK NUTS (E)  
FIGURE 4  
FIGURE 2  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 7 - TIGHTEN BOLTS  
STEP 9 - ATTACH KNOB  
At this time tighten the four bolts in figure 1 that  
fasten the hitch tubes to the sweeper housing. Next,  
tighten the two bolts in figure 2 that fasten the ends  
of the hitch tubes together. Finally, tighten the two  
bolts in figure 3 or 4 that fasten the hitch brackets to  
the hitch tubes.  
Place the tooth-lock washer (H) between the height  
adjustment handle and the height adjustment strap.  
Insert the carriage bolt (D) through the handle, the  
tooth-lock washer and the strap. Assemble the flat  
washer (G) and the plastic knob (S) onto the end of  
the bolt and tighten. See figure 6.  
STEP 8 - ATTACH HANDLE  
HEIGHT  
ADJUSTMENT  
HANDLE  
Assemble the height adjustment handle to the height  
adjustment tube on the front of the sweeper housing.  
Use the curved head bolts, bowed washers, lock  
washers and hex nuts which come pre-assembled to  
the tube. Position the height adjustment handle side to  
side so that the height adjustment strap will align up  
against the outside of the handle and then tighten the  
nuts. See figure 5.  
CARRIAGE BOLT (D)  
TOOTH LOCK  
WASHER (H)  
HEIGHT  
ADJUSTMENT  
STRAP  
Assemble the grip (R) onto the end of the height  
adjustment handle as shown in figure 5.  
HEIGHT  
ADJUSTMENT  
HANDLE  
KNOB (S)  
FLAT WASHER (G)  
GRIP (R)  
HEX NUT  
LOCK  
WASHER  
FIGURE 6  
BOWED  
WASHER  
CURVED  
HEAD BOLT  
HEIGHT  
HEIGHT  
ADJUSTMENT  
TUBE  
ADJUSTMENT  
STRAP  
FIGURE 5  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 12 - ASSEMBLE TUBES TO BAG  
ASSEMB
L
Y
O
F HOPPER BAG  
Unfold the hopper bag, reverse the fold of the mesh  
wind screen and then lay the bag out flat with the wind  
screen on top and the Craftsman logo facing down.  
Insert the ends of the assembled upper hopper tubes  
down through the stitched sleeves in the sides of the  
hopper bag and then slide the tubes back underneath  
the wind screen. See figure 9.  
STEP 10 - ASSEMBLE UPPER TUBES  
Fit the ends of the two upper hopper tubes into the  
ends of a rear hopper tube. Align the holes in the ends  
of the tubes and insert plastic plugs (Q). See figure 7.  
NOTE: Either side of the tubes can face up.  
STITCHED SLEEVE  
REAR  
HOPPER  
TUBE  
UPPER  
HOPPER  
TUBE  
PLASTIC PLUG (Q)  
UPPER  
HOPPER  
TUBE  
FIGURE 7  
HOPPER  
BAG  
BOTTOM  
FIGURE 9  
STEP 11 - ASSEMBLE LOWER TUBES  
Fit the ends of the two lower hopper tubes into the  
ends of a rear hopper tube. Align the holes in the ends  
of the tubes and insert plastic plugs (Q). See figure 8.  
Place the assembled lower hopper tubes into the  
bottom of the hopper bag and then slide the tubes to  
the back of the bag. See figure 10.  
Attach the ends of the lower hopper tubes to the  
inside of the upper hopper tubes using two clevis pins  
(M) inserted from the inside, and two hair cotter pins  
(L). See figure 10.  
NOTE: Either side of the rear hopper tube can face up.  
REAR  
HOPPER  
TUBE  
UPPER HOPPER  
TUBE  
PLASTIC PLUG (Q)  
HAIR COTTER  
PIN (L)  
LOWER  
HOPPER  
TUBE  
FIGURE 8  
LOWER HOPPER TUBE  
CLEVIS PIN (M)  
HOPPER BAG  
BOTTOM  
FIGURE 10  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fold the bag flaps around the lower hopper tubes and  
attach to the bag bottom using the snaps. See figure  
13.  
STEP 13 - ATTACH BAG BOTTOM  
Insert the bag frame strap into the stitched sleeve at  
the front edge of the bag bottom. See figure 11.  
BAG FRAME STRAP  
FLAP  
SNAP  
STITCHED  
SLEEVE  
FIGURE 13  
FIGURE 11  
STEP 14 - ASSEMBLE SUPPORT RODS  
IMPORTANT: Do not over bend the support rods  
during the following step. Over bending will decrease the  
supporting tension of the rods.  
Assemble the two hopper support rods as shown in  
figure 14. Place the ends of the rods into the holes in  
the upper and lower hopper tubes, flexing the rod just  
enough to fit into the holes in the tubes.  
Assemble the bag frame strap to the holes in the  
lower hopper tubes using two clevis pins (N) and hair  
cotter pins (L). See figure 12.  
BAG FRAME STRAP  
NOTE: The hopper's mesh wind screen is not shown in  
figure 14 in order to better show the hopper support  
rods.  
HAIR COTTER  
PIN (L)  
CLEVIS PIN (N)  
SUPPORT  
RODS  
FIGURE 12  
FIGURE 14  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 16 - ATTACH ROPE  
STEP 15 - ASSEMBLE PIVOT ROD  
Secure the rope to the center of the upper rear hopper  
tube as shown in figure 17.  
Slide the hopper bag pivot rod through the upper hole  
in the upper hopper tubes and through the stitched  
sleeve at the front edge of the mesh wind screen,  
assembling a bag arm tube on each side as shown in  
figure 15.  
UPPER HOLE  
WIND SCREEN  
HOPPER BAG  
PIVOT ROD  
FIGURE 17  
BAG ARM TUBE  
FIGURE 15  
STEP 17 - ATTACH HOPPER BAG  
To attach the hopper bag to the sweeper, slide the  
ends of the bag arm tubes into the ends of the hitch  
tubes and secure with two clevis pins (O) and hairpin  
cotters (L). See figure 18.  
Assemble a vinyl cap (P) onto each bag arm tube as  
shown in figure 17.  
Assemble two palnuts (F) by lightly tapping them onto  
the ends of the pivot rod with a hammer. See figure  
16.  
HINT: To ease assembly of the palnuts, place the bag  
on its side on a solid surface. With the bottom end of  
the pivot rod against the surface, tap a palnut onto the  
top end of the rod. Repeat for other end of rod.  
BAG ARM TUBE  
CLEVIS PIN (O)  
CAP (P)  
PALNUT (F)  
HAIRPIN  
COTTER (L)  
HITCH TUBE  
HITCH TUBE  
FIGURE 18  
FIGURE 16  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTACHING SWEEPER HITCH TO TRACTOR  
BRUSH HEIGHT ADJUSTED  
APPROXIMATELY MID-WAY  
Place the tractor and sweeper on a flat level surface.  
Set the sweeper height adjustment handle to about the  
middle of its adjustment range.  
Attach the sweeper hitch to the tractor hitch, arranging  
the 3/4" spacers in one of six possible combinations as  
shown in GROUP A and GROUP B diagrams below.  
IMPORTANT:
To obtain the best performance from your  
sweeper, arrange the spacers so that the sweeper bag is  
approximately level with the ground and approximately 5"  
to 7" off the ground as shown in figure 19.  
APPROXIMATELY LEVEL  
(5" to 7" FROM SURFACE)  
GROUP "A"
 
- For
 
vehicles with hitches  
having 8" to 10" ground clearance.  
GROUP "B"
 
- For
 
vehicles with hitches  
having 10" to 13" ground clearance.  
HITCH BRACKET MOUNTED  
ABOVE HITCH TUBES  
HITCH BRACKET MOUNTED  
BELOW HITCH TUBES  
BLACK LINE IS TRACTOR HITCH  
BLACK LINE IS TRACTOR HITCH  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
KNOWYOUR SWEEPER  
WINDSCREEN  
HEIGHT  
ADJUSTMENT  
HANDLE  
HOPPER  
ROPE  
PIVOT ROD  
BAG ARM  
TUBE  
KNOB  
HHEIGHT  
AADJUSSTMENT  
SSTRAP  
HITCH  
BRACKETS  
HOPPER BAG  
Hopper Bag  
Collects grass clippings, leaves and debris.  
Hopper Rope  
Windscreen  
Permits dumping of hopper bag from driver's seat.  
Helps prevent collected material from being blown out of hopper bag.  
Connects the hopper bag to the sweeper housing.  
Bag Arm Tubes  
Pivot Rod  
Allows hopper bag to tilt forward to dump material.  
Height Adjustment Handle  
Height Adjustment Strap  
Knob  
Adjusts the operating height of the sweeper.  
Holds the height adjustment handle in position when locked.  
Locks the height adjustment handle to the height adjustment strap.  
Connects the sweeper to the towing vehicle. Adjusts for various height tractor hitches.  
Hitch Bracket  
HOW TO US
E
Y
OUR SWEEPER  
BRUSH HEIGHT ADJUSTMENT  
DUMPING OF SWEEPER  
Your sweeper can be dumped easily without getting  
off of the rider or tractor. Simply pull the rope forward  
to dump the hopper. Always empty hopper after each  
use.  
To adjust your sweeper brushes to the best operating  
height, loosen the adjustment knob and push down  
on the height adjustment lever to raise the brush, or  
push up on the lever to lower the brush. See figure  
19. Best adjustment is when the brush setting is 1/2"  
down into the grass. Always mow the grass to an  
even height before sweeping.  
CAUTION:
Never attach
the hopper rope to  
any part of your body or clothing!
Never hold  
onto
the rope while towing the sweeper!
Attach  
the rope to the towing vehicle to keep it away  
from wheels and rotating parts.  
SWEEPING SPEED  
Try a starting speed of approximately 3 m.p.h. (third  
gear on most tractors). Depending on the conditions,  
it may be necessary to adjust the sweeping speed in  
order to achieve best results.  
CAUTION: Keep sweeper away from fire.  
Excessive heat can damage the brushes and  
hopper bag and could cause the bag and its  
contents to burn.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
CUSTOMER RESPONSIBILITIES  
Read and follow the maintenance schedule and the  
procedures listed in the maintenance section.  
MAINTENANCE SCHEDULE  
Fill in dates as you  
complete regular service.  
Service Dates  
Check for loose fasteners  
Check for worn or damaged parts  
Lubricate brush shaft bearings  
Lubricate wheel bearings  
X
X
X
X
X
Clean Sweeper  
X
X
Clean/Lubricate chain and sprockets  
X
SCHEDULED MAINTENANCE  
Clean the sweeper after each use.  
Inspect for worn or damaged parts, such as brushes  
and wheels.  
Lubricate the brush shaft bearing twice a year with a  
few drops of light weight oil. See figure 20.  
COVER  
CLEAN  
AND  
GREASE  
HEIGHT ADJUSTMENT SLOT  
HEX  
LOCK  
NUT  
OIL BEARINGS HERE  
FLAT WASHER  
FLAT  
WASHER  
HUB CAP  
HEX BOLT  
FIGURE 21  
FIGURE 20  
CLEANING  
Every two years, remove the wheels and clean the  
sprockets, chains and gears found inside the wheel  
housing. After cleaning, lubricate with an even coat of  
light grease. To remove the wheel, pop off the hub cap  
using a screwdriver and remove the lock nut and flat  
washer. See figure 21.  
Clean sweeper housing with a soft brush or cloth.  
Clean debris from hopper bag with a brush or broom.  
Remove any material which has wrapped around  
brushes or ends of brush shaft.  
STORAGE  
Clean the sweeper and hopper bag thoroughly to help  
prevent rust and mildew.  
To collapse the hopper bag for storage, remove the two  
hopper support rods from the rear of the hopper.  
Store in a dry area.  
CAUTION:
Before storing the sweeper,  
always empty the hopper bag to avoid  
spontaneous combustion.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE AND ADJUSTMENTS  
SPROCKET, CHAIN AND PAWL SERVICE  
BRUSH REPLACEMENT  
IMPORTANT: Do not remove both wheels at the same  
time to avoid mixing of parts. (The R.H. and L.H. ratchet  
sprockets are not interchangeable.) Make notes on the  
position of washers and snap rings during disassembly.  
NOTE: Brush replacement should be done one brush at  
a time.  
Remove the hopper bag from the sweeper.  
Loosen the hex bolts and lock nuts on two single  
brush retainers which clamp one brush to the double  
brush retainers. Do Not loosen or remove the bolts  
which fasten the double brush retainers to the brush  
shaft. See figure 22.  
Remove the dust cover by removing the two rivets  
which fasten it to the wheel housing. (It is not  
necessary to remove the dust cover if you are only  
cleaning and lubricating the chain and sprockets.)  
Remove the retaining rings and washers which hold  
the sprockets onto the shafts.  
Remove the chain and both sprockets, holding them in  
position and sliding them off both of the shafts. (Look  
for the drive pin, which may fall out of the brush shaft  
when the ratchet sprocket is removed.) See figure 23.  
To reassemble, insert the drive pin through the hole  
at the end of the brush shaft. Make sure the pin slides  
back and forth easily in the shaft.  
Lightly grease both shafts and the chain, and fill the  
ratchet sprocket with grease. Assemble the chain with  
both sprockets back onto the shafts.  
Lightly grease the axle and then reassemble the wheel.  
The brushes should rotate only during forward rotation  
of the wheel. If the brushes are driven (rotated) by both  
forward and reverse rotation of the wheel, the drive pin  
is jamming in the ratchet gear. Disassemble and clean  
and lubricate the drive pin and ratchet gear.  
Slide the brush out of the retainers, noting on which  
side of the brush the bristles overlap. See figure 22.  
Install new brush, making sure the bristles overlap on  
the same side of the brush as before. See figure 22.  
BRUSH ROTATION  
OVERLAP  
BRUSH  
SHAFT  
BRISTLES  
SINGLE  
BRUSH  
RETAINERS  
DUST COVER  
DOUBLE BRUSH RETAINER  
OVERLAP  
GEAR SPROCKET  
CHAIN  
BRISTLES  
RATCHET  
SPROCKET  
BRUSH ROTATION  
FIGURE 22  
DRIVE PIN  
TROUBLESHOOTING  
Wheels skid when sweeping.  
Brushes set too low.  
Adjust height till brushes are 1/2"  
down into grass.  
Brushes are jammed  
Wheels are jammed.  
Stop sweeper. Remove obstruction.  
Removeonewheelatatimetocheck  
for obstruction or damage. Refer to  
Service and Adjustments section.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS  
REPAIR PARTS FOR MODEL 486.242112 - 42" HIGH PERFORMANCE LAWNSWEEPER  
71  
43  
70  
42  
71  
74  
46  
54  
43  
53  
74  
73  
75  
42  
75  
53  
44  
47  
70  
45  
48  
56  
14  
55  
44  
72  
3
56  
41  
15  
16  
19  
20  
65  
C
9
17  
27  
6
7
39  
59  
13  
12  
62  
11  
18  
D
33  
C
28  
1
A
81  
14  
52  
8
9
57  
10  
5
66  
40  
A
34  
28  
29  
24  
26  
63  
30  
76  
49  
B
4
31  
25  
26  
23  
81  
61  
D
38  
36  
75  
60  
25  
20  
58  
26  
67  
51  
55  
64  
37  
21  
2
37  
59  
32  
B
77  
80  
78  
22  
79  
68  
50  
69  
59  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RE
P
A
IR
P
A
RTS LIST FOR MODEL 486.242112 - 42" HIGH PERFORMANCE LAWNSWEEPER  
REF.  
NO.  
PART  
NO.  
QTY.  
DESCRIPTION  
REF.  
NO.  
PART  
NO.  
QTY.  
DESCRIPTION  
1
2
3
4
5
6
7
8
46776  
46777  
63467  
46778  
24186  
63468  
44947  
44695  
43086  
43083  
62489  
44232  
1629-56  
24198  
46780  
43012  
47189  
23580  
23581  
44008  
62490  
23573  
47046  
43655  
1650-21  
44007  
43182  
141  
1
1
1
1
1
1
2
2
6
2
2
2
2
1
4
8
12  
4
8
2
2
2
2
2
4
6
4
4
4
2
2
2
2
2
1
1
4
2
4
1
1
2
Hitch Tube, R.H.  
Hitch Tube, L.H.  
Housing Assembly  
Skirt, 42"  
Retainer, Skirt  
43  
44  
45  
46  
47  
48  
47477  
48726  
24189  
43938  
43737  
48401  
24191  
23687  
24192  
24193  
46781  
46823  
44985  
45088  
46782  
43224  
47810  
46847  
43720  
44326  
43081  
43084  
43943  
44732  
49493  
23368  
43343  
44917  
48402  
48365  
48366  
44481  
43055  
46867  
44230  
142  
2
2
1
2
1
1
1
1
1
1
2
1
2
4
2
2
8
1
1
1
1
4
1
1
1
2
1
2
4
2
2
2
6
2
1
1
4
1
Tube, Rear Hopper Frame  
Tube, Lower Hopper Frame  
Strap, Bag Frame  
Rod, Hopper Support 34"  
Hopper Rope  
Hopper Bag  
Strap, Height Adjustment  
Bracket, Hitch  
Bracket, Hitch (Straight)  
Handle, Height Adjustment  
Tube, Bag Arm  
Rod, Hopper Bag Pivot  
Wheel & Tire Ass'y. (with bearings)  
Wheel Bearing  
Bolt, Hex 5/16-18 x 3" Lg.  
Bolt, Hex 5/16-18 x 2-1/4" Lg.  
Nut, Nylock 5/16-18 Thread  
Bushing, Spacer  
Knob, Wing 5/16-18 Thread  
Bolt, Carriage 5/16-18 x 1" Lg.  
Washer, Flat 5/16" Std. Wrt.  
Bolt, Hex 5/16-18 x 1-3/4" Lg.  
Grip, Height Adjust  
Height Adjustment Tube Ass'y.  
Bolt, Cvd. Hd. 5/16-18 x 1-5/8" Lg. 49  
Washer, Bowed 1" x .32" x .06"  
Lock Washer, 5/16"  
Nut, Hex 5/16-18 Thread  
Brush Bushing Ass'y.  
Ball Bearing  
Retainer, Dust Cover  
Brush Shaft  
Brush, 42"  
Bolt, Hex 1/4-20 x 3/4" Lg.  
Nut, Nylock 1/4-20 Thread  
Retainer, Brush (Double)  
Retainer, Brush (Single)  
Washer, Flat 1-1/8" x .78" x .025" 62  
Sprocket / Gear  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
63  
64  
65  
66  
67  
Dust Cover  
Dowel Pin (Drive)  
Ring, Retaining 3/4"  
Ring, Retaining .594"  
Washer, Shim 1-1/8" x .594" x .025" 68  
Bolt, Hex 5/16-18 x 3/4" Lg.  
69  
Washer, Flat 1-1/2" x .375" x .062" 70  
Washer, Flat .78" x 1.25" x .06"  
Nut, Nylock 3/8-24 Thread  
Hub Cap  
Ring, Retaining 1/2"  
Bolt, Hex 3/8-24 x 3-1/2" Lg.  
Bushing, Spacer  
Washer, Tooth Lock 5/16"  
Pin, Hitch  
Tube, Hitch Spacer  
Hairpin Cotter, 1/8"  
Palnut, 3/8"  
1540-31  
1038  
71  
72  
73  
74  
75  
76  
Plug, 1/4"  
Pin, Clevis 1/4" x 1-1/8"  
Pin, Clevis 3/8" x 1/2"  
Cap, Vinyl  
Hairpin Cotter, 3/32" #3  
Pin, Clevis 1/4" x 1-1/2" Lg.  
Spring, Hitch Pin  
Pin, Cotter 1/8" x 3/4" Lg.  
Screw, #12 x 1/2" Hex Head  
Washer, 3/8" Flat  
2674-32  
43894  
43932  
23400  
43890  
43889  
44137  
44542  
43661  
62791  
62792  
48926  
Sprocket, Ratchet R.H. (not shown) 77  
Sprocket, Ratchet L.H.  
78  
79  
80  
Washer, 1/2" x 1" x .02"  
Chain, Roller  
Bolt, Hex 1/4-20 x 1" Lg.  
Housing, Wheel Drive Ass'y. L.H.  
Housing, Wheel Drive Ass'y. R.H.  
Tube, Upper Hopper Frame  
49102  
43070  
81 C-9M5732 14  
49535  
Rivet, Pop  
Owners Manual  
1
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get it fixed, at your home or ours!  
For repair of major brand appliances in your own home…  
no matter who made it, no matter who sold it!  
1-800-4-MY-HOMESM Anytime, day or night  
(1-800-469-4663)  
To bring in products such as vacuums, lawn equipment and electronics  
Sears Parts & Repair Center.  
for repair, call for the location of your nearest  
1-800-488-1222 Anytime, day or night  
For the replacement parts, accessories and owner’s manuals  
that you need to do-it-yourself, call Sears PartsDirectSM  
!
1-800-366-PART 6 a.m. – 11 p.m. CST,  
(1-800-366-7278)  
7 days a week  
To purchase or inquire about a Sears Service Agreement:  
1-800-827-6655  
7 a.m. – 5 p.m. CST, Mon. – Sat.  
Para pedir servicio de reparación a domicilio,  
y para ordenar piezas con entrega a domicilio:  
Au Canada pour service en français:  
SM  
1-877-LE-FOYER  
SM  
1-888-SU-HOGAR  
(1-877-533-6937)  
(1-888-784-6427)  
SM  
HomeCentral  
® Registered Trademark / ™ Trademark of Sears, Roebuck and Co.  
® Marca Registrada / ™ Marca de Fábrica de Sears, Roebuck and Co.  
© Sears, Roebuck and Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 900370520 User Manual
Craftsman Saw 113298721 113298761 User Manual
Crock Pot Slow Cooker Smart Pot 4 7 Quart User Manual
Delta Electronics Power Supply IGT002 User Manual
FieldServer Computer Drive FS 8700 66 User Manual
Fisher Price Motorized Toy Car W2604 User Manual
Fortinet Network Card 5140 R User Manual
Fortinet Network Card v30 MR7 User Manual
Generac Pressure Washer 1292 2 User Manual
Genesis Advanced Technologies Speaker GENESIS 53 User Manual