DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes TWO (2) PAR20 Metal Halide
lamps.
Comments
Prepared by
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
SPECIFICATION FEATURES
A... Housing
D... Electrical
edge lamp ring is secured with thread-
Housing and junction box are aluminum,
Integral electronic metal halide ballasts are less, bayonet action. Optional retractable
COMBOLIGHT®
Next Generation
Recessed
trim assembly is steel with powder coated mounted in a separate metal enclosure
arm is available for lamp pulldown and
extreme aiming. Includes Med. Base
sockets.
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
box attached to the junction box with
18” of flexible conduit. Ballast enclosure
includes a separated wiring compartment
the inner hardware of the fixture from sight and two knockouts for conduit entry and
F ... Mounting
A mounting frame is provided which
Multi-Lamp Fixture
below the ceiling. Can accommodate
various ceiling thickness.
features a perforated metal door for easy
maintenance access and cooler operation. inserts into the ceiling opening. The
Entire electrical assembly (jbox and ballast housing is then pushed through the
B... System Protection:
enclosure) is removable from the housing
for easy maintenance.
mounting frame and secured with
screws.
Two (2) Light
PAR20 Metal Halide
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
G... Labels
E ... Lamps
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Lamp holders are removable and may be
holes in housing provide cooler operation. Two (2) PAR20 Metal Halide lamps
mounted in adjustable double gimbal.
Remodel Housing
w/ 0.75” Trim Flange
C... Junction Box
Junction Box is UL listed for through branch regressed 1” for additional cut-off. Lamps
Ceiling Cut-Out: 5.90” x 10.38”
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
can accept up to three optical accesso-
ries (i.e. lens + hex louver + snoot). 45º x
listed as ‘access above ceiling not required’. 45º locking lamp adjustment. Beveled-
Double
Gimbal
9.27”
12.09”
45º x 45º
Adjust
7.95”
1.60”
10.79”
10.12”
6.15”
7.45”
Required
above
9.29”
4.65”
ceiling
8.22”
Integral Electronic
Metal Halide Ballasts
4.65”
9.25”
Separate Wiring
Compartment
Thermal
Protector
18” flexible conduit
For use with 20W or 39W PAR20 Metal Halide lamps.
ORDERING INFORMATION
C2
R
E
T
Configuration
Lamp Type / Wattage Label
Power Supply
Voltage
1
2
Lamp Mechanism
Trim Finish
C2 = COMBOLIGHT
Recessed Two (2) Light
020M20 = 20 Watt PAR20 Metal Halide
039M20 = 39 Watt PAR20 Metal Halide
G = Double Gimbal
W = White
= 120V
= 277V
= Retractable Double Gimbal
B
S
= Black
R
= Industrial Silver
Housing
Power Supply
Trim Flange
T = 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
R = Remodel
E = Electronic Metal Halide
Finish
W = White
Ballast
B
S
= Black
= Industrial Silver
rev 022408
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|