WARRANTY
Crosley Radio Products are warranted against defects in material and
workmanship for a period of 90 days beginning from the date of sale to the
original purchaser.
CR17
Should the unit fail under normal usage during the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the original
customer before returning the unit. Call Crosley Radio customer service for
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to
Friday.
i - Juke
Instruction Manual
Upon receiving the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its original packaging. Include
any adapters, parts, & accessories which were originally provided with the
product, along with a check or money order for $19.95 made out to Crosley
Radio to cover the handling and return postage. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
MUTE
VOL
+
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
albums
VOL
-
LOUISVILLE, KY 40299
extras
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial
use or modification of, or to any part of the product. This warranty does not cover damage due to improper
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state
to state.
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.
910-256700-001
11-8-06
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Optional Equipment
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
External Outputs
Auxiliary Inputs
The iJuke (CR17) is equipped with external speaker
outputs which will allow you to hook up external
speakers.
You can connect external audio devices such as CD
Players or other MP3 players by using the Auxiliary
Input (Aux In) jack and the supplied Auxiliary cable.
To connect an external devise, follow the directions
below.
1
The speaker jacks for external speakers are 4
ohm jacks and are located on the back of the
unit. Beside the speaker jacks is the external /
internal speaker switch which is labeled (EXT.
/ INT.) When using external speakers, this switch
must be switched to the EXT. position. Doing
this turns off the internal speakers in the unit
and redirects to power to the external speakers.
CAUTION
1
2
Connect one end of the supplied Auxiliary Cable
to the Aux In jack on the back of your unit.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Connect the other end of the cable to the Audio
Out Jack or Headphone Jack of your external
component.
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Note: If your external component doesn’t have a 3.5mm
output jack or headphone jack, you will need a
different cable to make the connection. Check
your local electronics retailer for different cable
options.
2
If you decide not to use the external speakers,
be sure the switch is on INT. position or the
internal speakers will not work.
3
4
Begin play on the external component and adjust
the volume of the iJuke to your desired listening
level.
to persons.
See the owner’s manual for your external
component for information on its operations.
Specification
Power Source
:
Input AC110-240V 50-60Hz
Output DC14V 2.5A
Auxiliary cable
Power Consumption : 30W
Speaker Dynamic type 4” 4 Ohm x 2
:
*
DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Welcome
Table of Contents
Thank you for purchasing the i-Juke (CR17). Before
operating this unit, please read this manual
thoroughly and retain it for future reference.
Getting Started
Remote Control
Lights / Bubble Tubes
Control Locator...................... 4-5
Unpacking.............................. 6
Set Up.................................... 6
Included with your iJuke is a full function remote
control. It allows you to control the main power and
volume of the iJuke and also gives you complete
control of your iPod including menu functions on
most iPod models. See below for a complete list of
the remote functions.
1
2
3
To turn on the lights, press the Light button on
the front of the unit.
About This Manual
Adjust the Stage Light Switch to Stop or Run to
make the Eternity Lights constant or in motion.
Basic Operation
Instructions in this manual describe the control
functions of the iJuke (CR17).
Using your iJuke.................... 7
Remote Control...................... 8
Lights / Bubble Tubes............ 8
Power
– The POWER button turns the iJuke
on/off. When docked, pressing the
power button will also turn your iPod
on/off with the unit.
The bubble tubes will start to bubble 10-15
minutes after the lights are turned on.
Note: The bubble tubes will not bubble unless the lights
are turned on. If the tubes haven’t started to
bubble within 15 minutes after turning on the
lights, very LIGHTLY tap on the brown plastic
below the bubble tube with your hand. Do not
tap the bubble tube itself as it could cause the
tube to break.
Menu
Mute
– The MENU button allows you to access
the menus on your iPod.
– The MUTE button mutes the volume
of the iJuke.
Connecting Optional Equipment
External Outputs.................... 9
Auxiliary Inputs....................... 9
– Pressing the FORWARD SKIP button
once will take you to the beginning of
the next song on your iPod. You can
press and hold it to search forwards
through the song that is playing.
– Pressing the BACKWARD SKIP button
once takes you to the beginning of the
song your are listening to. Press it
twice to go to the beginning of the
previous song. You can also press and
hold it to search backwards through
the song that is playing.
General
Troubleshooting .................... 10
Warranty................................. 11
– The PLAY/PAUSE button is used to
pause the song that is playing.
Pressing it twice resumes playback.
Up Select – The UP SELECT button moves
upwards through the menu selections.
DN Select – The DOWN SELECT button moves
downwards through the menu
selections.
Select
– The SELECT button enters your
selections from the menus.
– The REPEAT button allows you to
repeat selected songs on applicable
iPod models.
Repeat
Vol +
Vol -
– The VOLUME UP button Increases
your volume level.
– The VOLUME DOWN button
decreases your volume level.
POWER
MENU
MUTE
SELECT
UP ARROW
DN ARROW
VOL
VOL
+
-
REPEAT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Control Locator
Using your iJuke
Unit Controls
The iJuke features the Universal Dock that uses
dock adapters that come with newer iPod models.
Before inserting your iPod, you will need to install
the correct dock adapter. By using the correct dock
adapter, you can insert any iPod with a dock
connector. If you have an older iPod model that did
not come with a dock adapter, they are available on
us at 1-866-Crosley. While docked, the iJuke will
also charge your iPod. To connect your iPod, follow
the steps below. If you’re iPod doesn’t have a dock
connector, you can connect it to the unit by using
the Auxiliary Cable that is supplied.
3
4
Press the Power button to turn iJuke on.
1
2
3
4
5
6
7
8
9
Power Indicator
Power On/Off
Lights On/Off
Universal Dock
Remote Sensor
Speakers
Mute Indicator
Volume Up
Volume Down
Browse your iPod for songs and press the
Play/Pause button. Your music should begin to
play.
1
2
3
7
MUTE
VOL
+
8
9
5
6
Adjust the volume to your desired listening level.
albums
VOL
-
extras
4
To remove the dock adapter, push your fingernail
into the slot in the back of the adapter and lift
up.
5
6
10 Remote Storage
11 Auxiliary Input (Aux In)
12 Speaker Jacks
13 Internal / External Speaker Switch
(EXT. / INT.)
14 Stage Light Stop & Run Switch
15 DC Jack
6
1
2
Insert the correct dock adapter that fits your
iPod. Your iPod should fit snugly into the correct
adapter. Gently press the adapter until it snaps
firmly in place.
Connect your iPod as shown in the illustration
below.
10
Note: If your iPod does not have a dock connector, use
the supplied Auxiliary Cable and hook your iPod
to the Auxiliary Input (Aux In) jack on the back
of the unit.
7
4
11
12
13
14 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Locator
Getting Started
22
Remote Controls
Unpacking
16
17
23
24
1
Remove unit from box and remove all packing
materials.
Note: Save the box and packing materials in case the
unit needs to be transported or returned.
4
Plug the AC cord into an appropriate outlet.
Note: This product is equipped with a polarized
alternating-current line plug (a plug having one
blade wider than the other.) This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet try reversing the plug, if the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
16 Power
POWER
MENU
MUTE
17 Backward Skip
18 Play / Pause
19 Up Select
20 Down Select
21 Repeat
22 Select
23 Menu
24 Mute
SELECT
25
2
3
4
Remove plastic safety cover from A/C plug.
Remove tie from A/C cord
18
19
UP ARROW
VOL +
VOL -
26
DN ARROW
REPEAT
20
21
27
Remove tie from A/C adapter.
25 Forward Skip
26 Volume Up
27 Volume Down
Set Up
1
Check the carton for all the parts shown.
Remote Control
A/C adapter
AC Power Cord
5
Remove battery cover from remote control and
install 2 AAA batteries (not included). Note the
correct battery orientation.
Auxiliary cable
2
3
Plug the small end of the AC adapter into the
DC Jack on the back of the unit.
Plug the small end of the AC Power Cord into
the AC adapter.
6
Place the iJuke on a flat surface.
Note: The speakers in the iJuke are shielded which
limits the possibility of video interference if placed
near a computer or television monitor.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|