•
appliance.
STRAIGHTENING BASICS
NOTE: Please refer to the temperature
setting guide for heat settings, especially if
using your iron on damp hair.
USING INSTANT HEAT, THE 25 WET DRY
IMPORTANT SAFETY
INSTRUCTIONS
OPERATING
VARIABLE TEMPERATURE SETTINGS &
UNIFORM HEAT RECOVERY SYSTEM
This straightening iron features Conair’s
Instant Heat technology. It heats up to the
temperature you’ve selected for your hair
type and is then ready to use.
Within this Instant Heat technology there are
25 variable wet•dry temperature settings for
every type of hair, from the finest to the
curliest and most resistant. Use the low
settings for wet/damp hair and as your hair
dries turn to the medium settings. Once hair
is completely dry, use the medium to high set-
tings to complete the straightening process.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or damaged,
or dropped into water. Return the appliance
to an authorized service center for examina-
tion and repair.
6. Keep the cord away from heated surfaces.
7. Do not pull, twist, or wrap line cord around
appliance, even during storage.
8. Never place the appliance on a soft surface,
such as a bed or couch, where the air openings
may be blocked.
9. Never use while sleeping.
10. Never drop or insert any object into any
opening.
11. Do not use outdoors or operate where aero-
sol (spray) products are being used or where
oxygen is being administered.
12. Do not let heated surfaces touch eyes
or bare skin. This straightener is hot when
in use.
13. Do not place the heated straightener
directly on any surface or on the appliance
power cord while it is hot or plugged in.
14. Before plugging in, read the information
about dual voltage contained in the instruc-
tion section of this manual.
1. Plug the straightening iron cord into any
household outlet (120/240V). Press On but-
ton (the red light will blink indicating that the
straightener is heating up). The iron will heat
up very quickly. The green indicator light will
light indicating that the unit is set to “wet”
setting and will blink until the unit reaches
the proper temperature. To turn off, press
Off button (red light will go off). Never leave
your straightening iron on and unattended.
However, if you fail to turn the unit off, it will
shut itself off automatically within 60 minutes.
INSTRUCTIONS
STYLING WITH THE NEW EASY-GLIDE
CERAMIC-COATED PLATES
The plates of your new straightening iron
have an easy-glide ceramic-coated surface,
the newest technology.
This means that hair glides easily over the
surface of the plates as you’re straightening
and it is simpler to clean off styling product
residue after each use. The ceramic-coated
surface also helps smooth down flyaways
and frizzies. As you smooth each strand, heat
is evenly distributed so that the style you
create has a salon-perfect, silky smooth,
shining finish. Hair slips right off the plates
after it’s straightened.
When using electrical appliances, especially
when children are present, basic safety pre-
cautions should always be followed, includ-
ing the following:
This straightening iron appliance is intended for
household use. This unit is designed to operate
at 120/240 volts AC. Use on Alternating Current
(50/60 hertz) only.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat
this safety feature.
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER—Any appliance is electri-
cally live even when the switch is off. To reduce
the risk of death by electric shock:
1. Always unplug appliance immediately after
using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other
liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING: The straightening iron's
ceramic-coated plates will get very hot
within a few seconds and should not be
placed in contact with the skin after the
straightening iron has been turned on.
DUAL VOLTAGE
Temperature Setting Guide
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug with
correct configuration, prior to use in outlet.
TEMP. CONTROL
Low/Wet 1-8
HAIR TYPE
Start with a hair section that is 2" wide and no
more than 1/2" thick. Open the iron and place
a hair section between the two hot plates,
close to the scalp. Trap hair between the plates
by firmly squeezing the handles together. While
maintaining the tension, slowly pull the unit
down along the hair section toward the end
of hair. At the end of hair section, release the
pressure on the handle and allow the hair sec-
tion to slide out. Repeat process on additional
sections of hair until you achieve the hair style
you desire. It may be necessary to repeat
process on certain areas, depending on the
texture of your hair or how damp it is.
Delicate, thin, easy-to-straighten hair
Average to thick or treated hair
The ceramic technology is a pleasure to work
with because it makes styling your hair easier
and the results more professional.
DRYING SYSTEM WITH UNIQUE
,
Medium/Damp 9-14
DRY N STRAIGHT™ WET • DRY DESIGN
Med/High 15-20
High/Dry 21-25
Thick or wavy hair
This Wet•Dry Straightener features our exclu-
sive vent and channel design, allowing for use
on dry or damp hair. When used on damp hair,
excess water is forced into channels where it
can escape as steam. The steam evaporates
through the vents in the housing, while the hair’s
natural moisture is sealed into the cuticle.
CAUTION: Steam evaporating through the
vents may be hot. During use, avoid touching
or blocking the vents and direct drying vents
away from your scalp and face.
Hard-to-straighten hair
And that’s not all. Conair’s professional salon
standards of engineering provide you with a
Uniform Heat Recovery System that maintains
the straightening iron at a constant temperature.
There is a constant flow of power to ensure
that heat is continuously delivered for optimal
styling results, unlike other units which lose
heat during use. This provides consistent
styling power so that every strand of your hair
is set with the same level of heat and comes
out the same way for a perfect finish.
WARNING
—To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
15. Do not touch the housing of your appli-
ance near the straightening plates as it is
hot when in use.
2. This appliance should not be used by, on,
or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by the
manufacturer.
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
SAVE THESE
INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Do not use an extension cord to operate
,
™
GET TO KNOW YOUR
LIMITED TWO-YEAR WARRANTY
Conair will repair or replace (at our option) your
unit free of charge for 24 months from the date
of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return
the defective product to the service center
listed below, together with your purchase
receipt and $3.00 for postage and handling.
California residents need only provide proof
of purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 24-MONTH DURATION OF
THIS WRITTEN WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR THE
BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or
limitation of special, incidental, or consequential
damages, so the above limitation may not apply
to you. This warranty gives you specific legal
rights, and you may also have other rights, which
vary from state to state.
,
USER
Dry N Straight
DRY N STRAIGHT™ WET • DRY
CERAMIC STRAIGHTENING IRON
WARNING:
IF YOU THINK
MAINTENANCE
Your straightening iron is virtually maintenance-
free. No lubrication is needed. Keep all vents
and openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, allow to cool, and wipe
exterior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an authorized service
representative only. No repairs should be
attempted by the consumer.
THE POWER IS OFF
WHEN THE SWITCH
IS OFF,
Cool tip
Exclusive
drying
vent and
channel
design
YOU’RE WRONG.
KEEP AWAY FROM WATER
2" ceramic-
coated plates
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into
the appliance, causing it to rupture and short.
Inspect the cord frequently for damage. Stop
use immediately if damage is visible or if unit
stops or operates intermittently.
25 wet • dry
variable heat settings
•
2" Wet Dry
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still elec-
trically live even if the switch is off? If the
plug is in, the power is on. So when you
are not using your appliances, keep them
unplugged.
Ceramic
Wet • dry On/Off
touchpad button
with LED indicator
STORAGE
Straightener
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug
connections.
Power On/Off
touchpad button
with LED indicator
Instruction & Styling Guide
Service Center
For your safety and continued enjoyment
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
of this product, always read the instruction book
carefully before using.
Auto off
ALWAYS UNPLUG
SMALL APPLIANCES
Professional
swivel line cord
®
©2006 CONAIR CORPORATION
150 Milford Road, East Windsor, NJ 08520
7475 North Glen Harbor Blvd., Glendale, AZ 85307
Patent Pending
Dual voltage
IB-6740
06NP041
Model CS44CS
Download from Www.Somanuals.com. All Manuals Search And Download.
|