Clarion CD Player DXZ448R User Manual
Owner’s manual / Mode d’emploi  
Bedienungsanleitung / Istruzioni per l’uso  
Gebruiksaanwijzing / Manual de instrucciones  
Bruksanvisning / Manual de instruções  
DXZ448R  
RDS-EON FM / MW / LW RADIO CD COMBINATION  
•
COMBINE RADIO FM/PO/GO RDS-EON-LECTEUR DE CD  
•
RDS-EON UKW/MW/LW RADIO-CD-KOMBINATION  
•
COMBINAZIONE DI RADIO RDS-EON FM/MW/LW E  
LETTORE CD  
•
RDS-EON FM/MW/LW RADIO CD COMBINATIE  
•
COMBINACIÓN DE RADIO RDS-EON DE FM/MW/LW Y  
REPRODUCTOR DE CD  
•
KOMBINERAD FM/MV/LV-RADIO MED RDS-EON OCH CD-  
SPELARE  
•
COMBINAÇÃO DE CD COM RÁDIO FM/MW/LW RDS-EON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing this Clarion product.  
∗ Please read this owner’s manual in its entirety before operating this equipment.  
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).  
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.  
∗ This manual includes the operating procedures of the CD changer, DVD changer, DAB and TV  
tuner connected via the CeNET cable. The CD changer, DVD changer and TV tuner have their own  
manuals, but no explanations for operating them are described.  
CAUTIONS:  
OBS!  
This appliance contains a laser system and  
is classified as a “CLASS 1 LASER  
Apparaten innehåller laserkomponenten  
som avger laserstrålning överstigande  
gränsen för laserklass 1.  
PRODUCT”. To use this model properly,  
read this Owner’s Manual carefully and keep  
this manual for your future reference. In  
case of any trouble with this player, please  
contact your nearest “AUTHORIZED service  
station”. To prevent direct exposure to the  
laser beam, do not try to open the enclosure.  
VAROITUS  
Suojakoteloa si saa avata. Laite sisältää  
laserdiodin, joka lähettää näkymätöntä  
silmille vaarallista lasersäteilyä.  
!CAUTION  
MODEL  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED IN THE OWNER’S  
MANUAL MAY RESULT IN HAZARDOUS  
RADIATION EXPOSURE.  
ADVARSEL.  
Denne mærking er anbragt udvendigt på  
apparatet og indikerer, at apparatet arbejder  
med laserstråler af klasse 1, hvilket betyder,  
at der anvendes laserstråler af svageste  
klasse, og at man ikke på apparatets  
yderside kan blive udsat for utilladelig  
kraftig stråling.  
APPARATET BØR KUN ÅBNES AF  
FAGFOLK MED SÆRLIGT KENDSKAB TIL  
APPARATER MED LASERSTRÅLER!  
Indvendigt i apparatet er anbragt den her  
gengivne advarselsmækning, som advarer  
imod at foretage sådanne indgreb i  
apparatet, at man kan komme til at udsaætte  
sig for laserstråling.  
2
DXZ448RDownload from Www.Somanuals.com. All Manuals Search And Download.  
Display Items  
Handling Compact Discs  
Contents  
• Do not use commercially available CD  
protection sheets or discs equipped with  
stabilizers, etc. These may damage the disc or  
cause breakdown of the internal mechanism.  
1. PRECAUTIONS ............................................................................................................................... 3  
Handling Compact Discs ................................................................................................................. 4  
2. CONTROLS..................................................................................................................................... 5  
3. NOMENCLATURE .......................................................................................................................... 6  
Names of the Buttons and Their Functions ..................................................................................... 6  
Major Button Operations When External Equipment is Connected to This Unit .............................. 7  
Display Items ................................................................................................................................... 8  
LCD Screen ..................................................................................................................................... 8  
4. DCP ................................................................................................................................................. 9  
5. REMOTE CONTROL (Optional) ................................................................................................... 10  
Inserting the Batteries ................................................................................................................... 10  
Functions of Remote Control Unit Buttons .................................................................................... 11  
6. OPERATIONS ............................................................................................................................... 12  
Basic Operations ........................................................................................................................... 12  
Radio Operations ........................................................................................................................... 14  
RDS Operations............................................................................................................................. 16  
CD Operations ............................................................................................................................... 19  
Operations Common to Each Mode .............................................................................................. 21  
7. OPERATIONS OF ACCESSORIES .............................................................................................. 24  
CD Changer Operations ................................................................................................................ 24  
TV Operations................................................................................................................................ 26  
Digital Radio/DAB Operations ....................................................................................................... 27  
8. IN CASE OF DIFFICULTY ............................................................................................................ 31  
9. ERROR DISPLAYS ....................................................................................................................... 32  
10. SPECIFICATIONS ......................................................................................................................... 33  
Use only compact discs bearing the  
mark.  
or  
: Enter indication  
: Manual indication  
Do not play heart-shaped, octagonal, or other  
specially shaped compact discs.  
Preset channel indication (1 to 6)  
Disc number indication (1 to 12)  
Some CDs recorded in CD-R/CD-RW mode  
may not be usable.  
Storage  
Operation status indication  
Titles, PS names, PTYs, CT (clock), etc.  
are displays.  
• Do not expose compact discs to direct  
sunlight or any heat source.  
Z-Enhancer Plus indication  
• Do not expose compact discs to excess  
humidity or dust.  
• Do not expose compact discs to direct heat  
from heaters.  
Handling  
• Compared to ordinary music CDs, CD-R and  
CD-RW discs are both easily affected by high  
temperature and humidity and some of CD-R  
and CD-RW discs may not be played.  
Cleaning  
Therefore, do not leave them for a long time in  
the car.  
• New discs may have some roughness around  
the edges. If such discs are used, the player  
may not work or the sound may skip. Use a  
ball-point pen or the like to remove any  
roughness from the edge of the disc.  
• To remove fingermarks and dust, use a soft  
cloth and wipe in a straight line from the  
center of the compact disc to the  
circumference.  
: DAB indication  
: Alternative frequency indication  
: Regional indication  
: Traffic announcement indication  
: Traffic programme indication  
: Programme type indication  
: Information indication for DAB  
• Do not use any solvents, such as  
commercially available cleaners, anti-static  
spray, or thinner to clean compact discs.  
• After using special compact disc cleaner, let  
the compact disc dry off well before playing it.  
Ball-point pen  
Roughness  
• Never stick labels on the surface of the  
compact disc or mark the surface with a pencil  
or pen.  
• Never play a compact disc with any  
cellophane tape or other glue on it or with  
peeling off marks. If you try to play such a  
compact disc, you may not be able to get it  
back out of the CD player or it may damage  
the CD player.  
• Do not use compact discs that have large  
scratches, are misshapen, cracked, etc. Use  
of such discs may cause misoperation or  
damage.  
• To remove a compact disc from its storage  
case, press down on the center of the case  
and lift the disc out, holding it carefully by the  
edges.  
: MAGNA BASS EXTEND indication  
: Stereo indication for DAB  
: Disc indication  
1. PRECAUTIONS  
1. This unit is applicable for on-road 4 wheel  
vehicle purpose only. Use for tractor, fork  
truck, bulldozer, off road vehicle, 2 or 3 wheel  
motor bicycle, marine boat or other special  
purpose vehicle is not appropriate.  
: Scan indication  
: Repeat indication  
: Random indication  
: Mute indication  
3. Driving on extremely bumpy roads which  
cause severe vibration may cause the sound  
to skip.  
INFORMATION FOR USERS:.  
2. When the inside of the car is very cold and  
the player is used soon after switching on the  
heater moisture may form on the disc or the  
optical parts of the player and proper  
CHANGES OR MODIFICATIONS TO THIS  
PRODUCT NOT APPROVED BY THE  
MANUFACTURER WILL VOID THE  
WARRANTY.  
LCD Screen  
playback may not be possible. If moisture  
forms on the disc, wipe it off with a soft cloth.  
If moisture forms on the optical parts of the  
player, do not use the player for about one  
hour. The condensation will disappear  
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.  
The screen will recover when it returns to normal temperature.  
naturally allowing normal operation.  
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.  
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.  
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.  
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.  
8
DXZ448R  
DXZ448R  
3
DXZ448R  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Major Button Operations When External Equipment is  
Connected to This Unit  
CONTROLS / LES COMMANDES / REGLER / CONTROLLI  
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS  
3. NOMENCLATURE  
2.  
Note:  
●When theTV/DAB is connected  
∗ For details, see the section “TV  
●When the CD/DVD changer is  
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).  
connected  
Main unit / Appareil principal / Hauptgerät / Apparecchio principale  
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal  
operations” or “DAB operations”.  
Names of the Buttons and Their Functions  
∗ For details, see the section “CD changer  
operations”. For the DVD changer, refer to  
the Owner’s Manual provided with the DVD  
changer.  
[AF] button  
[RELEASE] button  
• Deeply push in [RELEASE] button to unlock  
the DCP.  
[DIRECT] buttons  
• Store a station into memory or recall it  
directly while in the radio mode.  
• Press the button to turn on or off the AF  
(Alternative Frequency) function in the DAB  
mode. (This function is only DAB tuner.)  
[CD SLOT]  
[ROTARY]  
[RELEASE]  
[Q]  
[DISP] button  
• When the button is pressed and held,  
switches the user titles or track titles, etc.  
while in the CD changer mode.  
[ROTARY] knob  
• Adjust the volume by turning the knob  
clockwise or counterclockwise.  
[RDM] button  
• Perform random play while in the CD mode.  
[TA] button  
• Use the button to set the TA (Traffic  
Announcement) standby mode in the DAB  
mode. (This function is only DAB tuner.)  
[AF]  
[Z+]  
[TA]  
[RPT] button  
• Repeat play while in the CD mode.  
• Use the knob to perform various settings.  
[FNC]  
[A-M]  
[T] button  
• Use the button to input a title in the CD  
changer mode.  
[CD SLOT]  
• CD insertion slot.  
[P/A] button  
[DISP]  
[BND]  
[SCN] button  
• Perform preset scan while in the TV mode.  
When the button is pressed and held, auto  
store is performed. (This function is only TV  
tuner.)  
• Perform scan play for 10 seconds of each  
track while in the CD mode.  
• Use the button to scroll the title during CD-text  
play.  
[Q] button  
• Eject a CD when it is loaded into the unit.  
[UP], [DN] buttons  
[
] button  
[UP]  
[
]
• Select the disc.  
[DIRECT]  
[DN]  
• Use the button to set the PTY (Programme  
Type) standby mode or PTY items.  
[AF] button  
• Press the button to turn on or off the AF  
(Alternative Frequency) function.  
[DIRECT] buttons  
• Store a station into memory or recall it  
directly.  
[T]  
[P/A]  
[
], [  
]
[SCN]  
[RPT]  
[RDM]  
[RDM] button  
• Play or pause a CD while in the CD mode.  
• Perform random play. Also perform disc  
random play when the button is pressed and  
held.  
• When the button is pressed and held,  
Regional function can select ON or OFF.  
[a], [d] buttons  
[
] button  
• Select a station while in the radio mode or  
select a track when listening to a CD. These  
buttons are used to make various settings.  
• Use the button to set the PTY (Programme  
Type) standby mode or PTY items in the DAB  
mode.  
[Z+] button  
[RPT] button  
• Use the button to select one of the 4 types of  
sound characteristics already stored in  
memory.  
• Perform repeat play. When this button is  
pressed and held, disc repeat play is  
performed.  
• Press and hold the button for 1 second or  
longer to switch the fast-forward/fast-  
backward.  
• Switch the TV picture mode or VTR (external)  
picture mode.  
[TA] button  
[a], [d] buttons  
[SCN] button  
• Use the button to set the TA (Traffic  
Announcement) standby mode.  
[BND] button  
• Switch the band, or seek tuning or manual  
tuning while in the radio mode.  
• Select a station.  
• Perform scan play for 10 seconds of each  
track. Disc scan play is performed when the  
button is pressed and held.  
[BND] button  
• Switch the band.  
[DISP] button  
• Switch the display indication (Main display,  
Sub display, Clock display).  
• Play a first track while in the CD mode.  
• When the button is pressed and held, switch  
seek tuning or manual mode.  
[
] button  
[A-M] button  
• Play or pause a CD or DVD.  
• Use the button to switch to the audio mode  
(bass/treble, balance/fader Z-Enhancer Plus,  
Magna Bass Extended adjustment)  
[T] button  
[a], [d] buttons  
• Use the button to input a title in the CD mode.  
• Press and hold the button for 1 second or  
longer to enter the adjust mode.  
• Select a track when listening to a disc.  
• Press and hold the button for 1 second or  
longer to switch the fast-forward/fast-  
backward.  
[FNC] button  
• Press the button to turn on the power.  
Press and hold the button for 1 second or  
longer to turn off the power.  
[P/A] button  
• Perform preset scan while in the radio mode.  
When the button is pressed and held, auto  
store is performed.  
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.  
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.  
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.  
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.  
[BND] button  
• Move the next disc in increasing order.  
• Switch the operation mode among the Radio  
mode, etc.  
[UP], [DN] buttons  
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.  
• Select the disc.  
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.  
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.  
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.  
5
DXZ448R  
6
DXZ448R  
DXZ448R  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. DCP  
The control panel can be detached to prevent  
theft. When detaching the control panel, store it  
in the DCP (DETACHABLE CONTROL PANEL)  
case to prevent scratches.  
Storing the DCP in the DCP Case  
Hold the DCP, in the orientation as shown in the  
figure below, and put it into the supplied DCP  
case. (Ensure the DCP is in the correct  
orientation.)  
We recommend taking the DCP with you when  
leaving the car.  
DCP  
Removing the DCP  
1. Press the [FNC] button for 1 second or  
longer to switch off the power.  
2. Press the [RELEASE] button.  
DCP case  
[
]
RELEASE button  
CAUTION  
• The DCP can easily be damaged by  
shocks. After removing it, be careful not to  
drop it or subject it to strong shocks.  
• When the Release button is pressed and  
the DCP is unlocked, the car’s vibrations  
may cause it to fall.To prevent damage to  
the DCP, always store it in its case after  
detaching it. (ee figure below.)  
∗ The DCP is unlocked  
3. Remove the DCP.  
• The connector connecting the main unit  
and the DCP is an extremely important  
part. Be careful not to damage it by  
pressing on it with fingernails,  
screwdrivers, etc.  
DCP Rear Panel  
Main Unit Front  
DCP  
Attaching the DCP  
1. Insert the right side of the DCP into the main  
unit.  
DCP  
connector  
2. Insert the left side of the DCP into the main  
unit.  
Main unit connector  
Note:  
• If the DCP is dirty, wipe off the dirt with a soft, dry  
cloth only.  
2.  
DCP  
1.  
DXZ448R  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. REMOTE CONTROL (Optional)  
Receiver for remote control unit  
If you buy the RCB-164 sold  
separately, you can enjoy the use of  
the Remote Control function.  
Operating range: 30˚ in all directions  
Signal transmitter  
Remote control unit  
[
]
]
[
[
]
FUNC  
2-ZONE  
]
[
],[  
[
[
],[  
]
]
BAND  
[
]
TA  
[
]
[
]
DISP  
MUTE  
[
]
[
]
PTY  
PS/AS  
[
]
AF  
Inserting the Batteries  
1. Turn the remote control unit over, then slide the  
rear cover in the direction of the arrow.  
AA (SUM-3, IECR-6/1.5V)  
Batteries  
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries  
that came with the remote control unit facing in  
the directions shown in the figure, then close the  
rear cover.  
Notes:  
Using batteries improperly can cause them to  
explode. Take note of the following points:  
Rear cover  
• When replacing batteries, replace both batteries  
with new ones.  
• Do not short-circuit, disassemble or heat batteries.  
• Do not dispose of batteries into fire or flames.  
• Dispose of spent batteries properly.  
Rear side  
10  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions of Remote Control Unit Buttons  
Mode  
CD changer  
DVD changer  
Radio (RDS) / DAB  
CD  
TV  
Button  
[FUNC]  
Switches among radio, DAB, CD, CD changer, DVD changer and TV.  
Plays the first track.  
Top play.  
Moves the next disc  
in increasing order.  
[BAND]  
Switches reception  
band.  
Switches reception  
band.  
Increases and decreases volume (in all modes).  
[
[
] , [  
] , [  
]
]
Moves preset  
channels up and  
down.  
Moves tracks up and down.  
Moves preset  
channels up and  
down.  
When pressed and held for 1 second or  
longer:  
Fast-forward/fast-backward.  
[
]
No function.  
Switches between playback and pause.  
No function.  
Turns mute on and off.  
TA on and off.  
[MUTE]  
[TA]  
Switches among main display, sub display, clock (CT) display.  
[DISP]  
[PS/AS]  
Scan play.  
Preset scan.  
Scan play.  
Preset scan.  
When pressed and  
held for 1 second or  
longer: Disc scan  
play.  
When pressed and  
held for 2 seconds or  
longer: Auto store.  
When pressed and  
held for 2 seconds or  
longer: Auto store.  
[AF]  
Repeat play.  
AF function on and  
off.  
When pressed and  
held for 1 second or  
longer: REG function  
on and off  
Repeat play.  
No function.  
When pressed and  
held for 1 second or  
longer: Disc repeat  
play.  
[PTY]  
Random play.  
PTY standby mode  
on and off.  
Random play.  
Switches between TV  
and VTR.  
When pressed and  
held for 1 second or  
longer: Disc random  
play.  
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.  
∗ [2-ZONE] button is not available.  
DXZ448R  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. OPERATIONS  
Note:Be sure to read this chapter referring to the front diagrams of  
Basic Operations  
chapter “2. CONTROLS” on page 5 (unfold).  
Adjusting the volume  
Turning the [ROTARY] knob clockwise increases  
the volume; turning it counterclockwise  
decreases the volume.  
∗ The volume level is from 0 (minimum) to 33  
(maximum).  
CAUTION  
Be sure to lower the volume before  
switching off the unit power or the ignition  
key.The unit remembers its last volume  
setting. If you switch the power off with the  
volume up, when you switch the power back  
on, the sudden loud volume may hurt your  
hearing and damage the unit.  
Switching the display  
Press the [DISP] button to select the desired  
display.  
Turning on/off the power  
Each time you press the [DISP] button, the  
display switches in the following order:  
Note:  
• Be careful about using this unit for a long time  
without running the engine. If you drain the car’s  
battery too far, you may not be able to start the  
engine and this can reduce the service life of the  
battery.  
Main display  
1. Press the [FNC] button.  
2. The illumination and display on the unit light  
Sub display  
up. The unit automatically remembers its last  
operation mode and will automatically switch  
to display that mode.  
3. Press and hold the [FNC] button for 1 second  
or longer to turn off the power for the unit.  
Clock (CT) display  
Note:  
• System check  
The first time this unit is turned on after the wire  
connections are completed, it must be checked  
what equipment is connected. When the power is  
turned on, “SYSTEM” and “PUSH PWR” appear  
in the display alternately, so press the [FNC]  
button. The system check starts within the unit.  
When the system check is complete, press the  
[FNC] button again.  
Main display  
∗ Once selected, the preferred display becomes  
the display default. When a function  
adjustment such as volume is made, the  
screen will momentarily switch to that  
function’s display, then revert back to the  
preferred display several seconds after the  
adjustment.  
Selecting a mode  
1. Press the [FNC] button to change the  
operation mode.  
∗ For information on how to enter a title, refer to  
the subsection “Entering titles” in section  
“Operations Common to Each Mode”.  
2. Each time you press the [FNC] button, the  
operation mode changes in the following  
order:  
∗ When CT data is not received, “CT––:––”  
Radio mode ➜ DAB mode ➜ CD mode ➜  
CD changer mode ➜ DVD changer mode ➜  
TV mode ➜ Radio mode...  
∗ External equipment not connected with  
CeNET is not displayed.  
appears in the display.  
Setting the Z-Enhancer Plus  
This unit are provided with 4 types of sound  
tone effects stored in memory. Select the one  
you prefer.  
∗ The factory default setting is “Z+ OFF”.  
Each time you press the [Z+] button, the tone  
effect changes in the following order:  
12  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
<
>
∗ The factory default setting is “B Q 1 ”.  
(Adjustment 1/1.25/1.5/2)  
“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜  
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...  
5. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
• B-BOOST  
• IMPACT  
: bass emphasized  
: bass and treble  
emphasized  
• EXCITE  
: bass and treble  
emphasized mid de-  
emphasized  
Adjusting the treble (Gain,  
Frequency)  
This adjustment can be performed when the Z-  
Enhancer Plus is set to “CUSTOM”.  
• CUSTOM  
• Z+ OFF  
: user custom  
: no sound effect  
1. Press the [A-M] button and select “TREBLE”.  
2. Turning the [ROTARY] knob clockwise  
emphasizes the treble; turning it  
Adjusting the tone  
Press the [A-M] button and select the item to  
adjust. Each time you press the [A-M] button,  
the item changes as following order:  
counterclockwise attenuates the treble.  
<
>
∗ The factory default setting is “T G 0 ”.  
(Adjustment range: –6 to +6)  
●When “B-BOOST” is set  
3. Press the [a] or [d] button to select  
“B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last  
function mode  
<
>
“T F 10 ”.  
Turning the [ROTARY] knob clockwise or  
counterclockwise to select the frequency.  
●When “IMPACT” is set  
“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last  
function mode  
<
>
∗ The factory default setting is “T F 10 ”.  
(Adjustment 10 kHz/15 kHz)  
●When “EXCITE” is set  
4. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last  
function mode  
●When “CUSTOM” is set  
Adjusting the balance  
1. Press the [A-M] button and select “BAL 0”.  
“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD 0”  
➜ Last function mode  
2. Turning the [ROTARY] knob clockwise  
emphasizes the sound from the right  
speaker; turning it counterclockwise  
●When “Z+ OFF” is set  
“BAL 0” ➜ “FAD 0” ➜ Last function mode  
emphasizes the sound from the left speaker.  
∗ The factory default setting is “BAL 0”.  
(Adjustment range: L13 to R13)  
Adjusting the bass (Gain,  
Frequency, Q-curve)  
This adjustment can be performed when the Z-  
Enhancer Plus is set to “CUSTOM”.  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
1. Press the [A-M] button and select “BASS”.  
2. Turning the [ROTARY] knob clockwise  
emphasizes the bass; turning it  
Adjusting the fader  
counterclockwise attenuates the bass.  
1. Press the [A-M] button and select “FAD 0”.  
<
>
∗ The factory default setting is “B G 0 ”.  
2. Turning the [ROTARY] knob clockwise  
emphasizes the sound from the front  
speakers; turning it counterclockwise  
emphasizes the sound from the rear  
speakers.  
(Adjustment range: –6 to +6)  
3. Press the [a] or [d] button to select  
<
>
“B F 60 ”.  
Turning the [ROTARY] knob clockwise or  
counterclockwise to select the frequency.  
∗ The factory default setting is “FAD 0”.  
<
>
(Adjustment range: F12 to R12)  
∗ The factory default setting is “B F 60 ”.  
(Adjustment 60/100/200 Hz)  
3. When the adjustment is complete, press the  
[A-M] button several times until the function  
mode is reached.  
<
>
4. Press the [a] or [d] button to select “B Q 1 ”.  
Turning the [ROTARY] knob clockwise or  
counterclockwise to select the Q-curve.  
DXZ448R  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Radio Operations  
Adjusting the Z-Enhancer Plus  
1. Press the [Z+] button and select the Z-  
Enhancer Plus mode to adjust.  
Listening to the radio  
1. Press the [FNC] button and select the radio  
mode. The frequency or PS appears in the  
display.  
2. Press the [A-M] button and turning the  
[ROTARY] knob clockwise adjusts in the +  
direction; turning it counterclockwise adjusts  
in the – direction.  
∗ PS: Programme service name  
2. Press the [BND] button and select the radio  
band. Each time the button is pressed, the  
radio reception band changes in the following  
order:  
●When “B-BST 0” is selected, you can ad-  
just the bass in the range of –3 to 3.  
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...  
●When “IMPACT 0” is selected, you can ad-  
just the bass and treble in the range of –3  
to 3.  
3. Press the [a] or [d] button to tune in the  
desired station.  
●When “EXCITE 0” is selected, you can ad-  
just the bass and treble in the range of –3  
to 3.  
∗ Press and hold the [Z+] button for 2 seconds  
or longer to change to the “CUSTOM” mode.  
Tuning  
There are 3 types of tuning mode available, seek  
tuning, manual tuning and preset tuning.  
Bass/treble characteristics become flat and  
the indication “Z+ FLAT” is shown in the  
display.  
Seek tuning  
There are 2 types of seek tuning: DX SEEK and  
LOCAL SEEK.  
Press the [Z+] button again to change to the  
“Z+ OFF” mode.  
DX SEEK can automatically tune in to  
receivable broadcast stations; LOCAL SEEK  
can tune in to only broadcast stations with a  
good reception sensitivity.  
Adjusting MAGNA BASS EXTEND  
The MAGNA BASS EXTEND does not adjust  
the low sound area like the normal sound  
adjustment function, but emphasizes the deep  
bass sound area to provide you with a dynamic  
sound.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW, LW)).  
2. Tune into a station.  
∗ If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
“MANU” in the display goes off and seek  
tuning is now available.  
1. Press and hold the [A-M] button for 1  
second or longer to turn on the MAGNA  
BASS EXTEND effect. “M-B EX” lights in  
the display.  
∗ If “TA” is lit in the display, TP stations are  
2. Press and hold the [A-M] button for 1  
second or longer to turn off the MAGNA  
BASS EXTEND effect. “M-B EX” goes off  
from the display.  
automatically sought.  
●DX SEEK  
Press the [a] or [d] button to automatically  
seek a station.  
∗ The factory default setting is off.  
When the [d] button is pressed, the station is  
sought in the direction of higher frequencies; if  
the [a] button is pressed, the station is sought  
in the direction of lower frequencies.  
∗ When seek tuning starts, “DX” appears in the  
display.  
CT (Clock Time) function  
The CT function receives CT data sent from a  
RDS station and displays the time. Press the  
[DISP] button to switch to the CT display.  
∗ If a CT data is not being received, “CT––:––”  
appears in the display.  
●LOCAL SEEK  
If you press and hold the [a] or [d] button for  
1 second or longer, local seek tuning is carried  
out. Broadcast stations with good reception  
sensitivity are selected.  
Note:  
• CT data is not transmitted in some countries and  
by some broadcast stations. Also, in some areas,  
the CT may not display accurately.  
∗ When local seeking starts, “LO” appears in the  
display.  
14  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Operations  
Manual tuning  
Auto store  
There are 2 ways available: Quick tuning and  
step tuning.  
Auto store is a function for storing up to 6  
stations that are automatically tuned in  
sequentially. If 6 receivable stations cannot be  
received, a previously stored station remains  
unoverwritten at the memory position.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the  
quick tuning mode, you can quickly tune the  
desired frequency.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
2. Press and hold the [P/A] button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the  
preset channels.  
∗ If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
“MANU” is lit in the display and manual tuning  
is now available.  
∗ If auto store is performed in the FM bands, the  
stations are stored in FM3 even if FM1 or FM2  
was chosen for storing stations.  
2. Tune in a station.  
●Quick tuning:  
Press and hold the [a] or [d] button for 1  
Preset scan  
second or longer to tune in a station.  
Preset scan receives the stations stored in  
preset memory in order. This function is useful  
when searching for a desired station in memory.  
●Step tuning:  
Press the [a] or [d] button to manually  
tune in a station.  
1. Press the [P/A] button.  
∗ If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
2. When a desired station is tuned in, press the  
[P/A] button again to continue receiving that  
station.  
Note:  
Recalling a preset station  
• Be careful not to press and hold the [P/A] button  
for 2 seconds or longer, otherwise the auto store  
function is engaged and the unit starts storing  
stations.  
A total of 24 preset positions (6-FM1, 6-FM2, 6-  
FM3, 6-AM) exist to store individual radio  
stations in memory. Pressing the corresponding  
[DIRECT] button recalls the stored radio  
frequency automatically.  
1. Press the [BND] button and select the  
desired band (FM or AM (MW/LW)).  
2. Press the corresponding [DIRECT] button to  
recall the stored station.  
∗ Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store that station  
into preset memory.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
2. Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
DXZ448R  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS Operations  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
RDS (Radio Data System)  
This unit has a built-in RDS decoder system that  
supports broadcast stations transmitting RDS data.  
2. Press the [a] or [d] button to select “LINK  
ACT”.  
This system can display the name of the  
broadcast station being received (PS) and can  
automatically switch to the broadcast station  
with the best reception as you move long  
distances (AF switching).  
3. Turn the [ROTARY] knob clockwise for “ON”  
or counterclockwise for “OFF”.  
● ON:  
Also, if a traffic announcement or programme  
type is broadcast from an RDS station, no matter  
what mode you are in, this broadcast is received.  
AF switching between DAB and RDS enabled.  
● OFF:  
AF switching between DAB and RDS disabled.  
Additionally, if EON information is received, this  
information enables automatic switching of other  
preset stations on the same network and  
interruption of the station being received with  
traffic information from other stations (TP). This  
function is not available in some areas.  
4. Press the [T] button to return to the previous  
mode.  
REG (Regional programme) function  
When the REG function is ON, the optimum  
regional station can be received. When this  
function is OFF, if the regional station area  
switches as you drive, a regional station for that  
region is received.  
When using the RDS function, always set the  
radio to FM mode.  
• AF  
• PS  
: Alternative Frequency  
: Programme Service Name  
∗ The factory default setting is “OFF”.  
• PTY : Programme Type  
• EON : Enhanced Other Network  
Notes:  
• This function is disabled when a national station  
such as BBC R2 is being received.  
• The REG function ON/OFF setting is valid when  
the AF function is ON.  
• TP  
: Traffic Programme  
∗ RDS interrupt does not function during AM radio  
reception.  
∗ When set receives RDS signal, and can read PS  
data, PS appears in the display.  
●Switching the REG function ON  
Press and hold the [AF] button for 1 second or  
longer.  
AF function  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
“REG” in the display lights and the REG function  
turns on.  
●Switching the REG function OFF  
Press and hold the [AF] button for 1 second or  
longer.  
∗ The factory default setting is “ON”.  
●Switching OFF the AF function  
Press the [AF] button. “AF” in the display goes  
off and the AF function turns off.  
“REG” in the display goes off and the REG  
function turns off.  
●Switching ON the AF function  
Press the [AF] button. “AF” in the display lights  
and the AF function turns on.  
∗ If the reception of the current broadcast station  
deteriorates, “SEARCH” appears in the display  
and the radio searches for the same programme  
on another frequency.  
Manually tuning a regional station  
in the same network  
1. This function is valid when the AF function is  
ON and the REG function is OFF.  
Note:  
• This function can be used when a regional  
broadcast of the same network is received.  
2. Press any one of the [DIRECT] buttons to  
●AF function between RDS and DAB  
When the same programme is broadcasted by  
both RDS and DAB, and this function is ON, the  
unit switches to receive the broadcast with the  
better reception automatically.  
call out the regional station.  
3. If the reception condition of the called out  
station is bad, press the [DIRECT] button of  
the same number. The unit receives a local  
station on the same network.  
∗ This function only operates when the DAH913 or  
DAH923 DAB unit, sold separately, is connected.  
∗ This factory default setting is “ON”.  
16  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS Operations  
∗ Some countries do not yet have PTY broadcast.  
TA (Traffic Announcement)  
∗ In the TA standby mode, a TP station has priority  
over a PTY broadcast station.  
In the TA standby mode, when a traffic announce-  
ment broadcast starts, the traffic announcement  
broadcast is received as top priority regardless of  
the function mode so you can listen to it.Traffic  
programme (TP) automatic tuning is also possible.  
●Setting the PTY standby mode  
When you press the [  
] button, “PTY” lights in  
the display and the PTY standby mode is turned  
on. When the selected PTY broadcast starts, the  
PTY item name appears in the display.  
∗ This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
RDS broadcast station being received has traffic  
announcement programmes.  
●Cancelling the PTY standby mode  
When you press and hold the [  
] button for 1  
●Setting the TA standby mode  
second or longer, “PTY” goes off in the display  
If you press the [TA] button when only “TP” is lit  
in the display, “TP” and “TA” light in the display  
and the unit is set into the TA standby mode until  
a traffic announcement is broadcast. When a  
traffic announcement broadcast starts, “TRA  
INFO” appears in the display. If you press the  
[TA] button while a traffic announcement  
and PTY standby mode is cancelled.  
●Cancelling a PTY interrupt broadcast  
Press the [  
] button during the PTY interrupt  
broadcast, the PTY interrupt is cancelled and  
the unit returns to PTY standby mode.  
broadcast is being received, the traffic  
announcement broadcast reception is cancelled  
and the unit goes into the TA standby mode.  
Selecting PTY  
1. When you press the [  
] button, the unit  
goes into PTY select mode.  
●Cancelling the TA standby mode  
2. Press any one of the [DIRECT] buttons.  
Alternatively, turn the [ROTARY] knob  
clockwise or counterclockwise to select the  
desired PTY.  
As “TP” and “TA” lit in the display, press the [TA]  
button. The “TA” in the display goes off and the  
TA standby mode is cancelled.  
∗ If “TP” is not lit, pressing the [TA] button searches  
for a TP station.  
∗ Below are the factory default settings stored  
for the [DIRECT] buttons.  
●Searching for a TP station  
PTY item  
Contents  
News  
Preset  
number  
When “TP” is not lit, if you press the [TA] button,  
“TA” in the display lights and the unit  
automatically receives a TP station.  
ENGLISH  
NEWS  
1
2
3
4
5
6
Note:  
INFO  
Information  
Pop Music  
Sport  
• If a TP station is not received, the unit continues  
the search operation. Pressing [TA] button again  
goes off “TA” in the display and stops TP station  
searching.  
POP M  
SPORT  
CLASSICS Serious Classical Music  
EASY M Easy Listening Music  
Auto store function for TP stations  
You can automatically store up to 6TP stations into  
preset memory.If the number ofTP can be received  
less than 6, broadcast stations already stored in  
memory and left without being overwritten.  
3. The PTY select mode is cancelled automati-  
cally 7 seconds after a PTY is selected.  
PTY seek  
1. When you press the [  
select mode is turned on.  
As “TA” lit in the display, press and hold the [P/  
A] button for 2 seconds or longer. The TP  
stations with the good reception sensitivity are  
stored into preset memory.  
] button, the PTY  
2. Select PTY.  
3. Press the [a] or [d] button. If you press  
the [d] button, the unit seeks a PTY  
broadcast moving up the frequencies; if you  
press the [a] button, it seeks moving down  
the frequencies.  
∗ Even if you select FM1 or FM2, a TP station is  
stored into memory for FM3.  
PTY  
This function enables you to listen to a  
broadcast of the selected programme type even  
if the unit is on a function mode other than radio.  
∗ If no station with the selected PTY broadcast  
can be received, the unit returns to the  
previous mode.  
DXZ448R  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS Operations  
3. If you press and hold any one of the  
[DIRECT] buttons for 2 seconds or longer,  
the selected PTY is stored into that preset  
channel memory.  
PTY preset memory  
1. When you press the [  
select mode is turned on.  
] button, the PTY  
2. Turn the [ROTARY] knob clockwise or  
counterclockwise to select the desired PTY.  
The 29 types of PTY below can be selected.  
PTY item  
SWEDISH  
ENGLISH  
NEWS  
GERMAN  
NACHRICH  
AKTUELL  
SERVICE  
SPORT  
FRENCH  
INFOS  
Contents  
News  
NYHETER  
AKTUELLT  
INFO  
AFFAIRS  
INFO  
MAGAZINE  
SERVICES  
SPORT  
Today’s events  
Information  
Sports  
SPORT  
SPORT  
EDUCATE  
DRAMA  
BILDUNG  
HöR+LIT  
KULTUR  
WISSEN  
UNTERH  
POP  
UTBILDN  
TEATER  
KULTUR  
VETENSKP  
UNDERH  
POP  
EDUCATIF  
FICTION  
CULTURE  
SCIENCES  
DIVERS  
Education  
Drama  
CULTURE  
SCIENCE  
VARIED  
Culture  
Science  
Variety  
POP M  
M POP  
Pop music  
Rock music  
Easy music  
Light music  
Classics  
Other music  
Weather  
Finance  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
CHILDREN  
SOCIAL  
ROCK  
ROCK  
M ROCK  
CHANSONS  
M CL LëG  
CLASSIQ  
AUTRE M  
MëTëO  
U-MUSIK  
L-MUSIK  
E- MUSIK  
- - MUSIK  
WETTER  
WIRTSCH  
KINDER  
SOZIALES  
RELIGION  
ANRUF  
LäTTLYSS  
L KLASS  
KLASSISK  
öVRIG M  
VäDER  
EKONOMI  
FöR BARN  
SOCIALT  
ANDLIGT  
TELEFON  
RESOR  
ECONOMIE  
ENFANTS  
SOCIëTë  
RELIGION  
FORUM  
For children  
Social  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
Religion  
Phone in  
Travel  
REISE  
VOYAGES  
LOISIRS  
JAZZ  
FREIZEIT  
JAZZ  
FRITID  
Leisure  
JAZZ  
Jazz  
COUNTRY  
NATION M  
OLDIES  
COUNTRY  
LANDES M  
OLDIES  
COUNTRY  
NATION M  
OLDIES  
COUNTRY  
CH PAYS  
RëTRO  
Country  
Nation music  
Oldies  
FOLK M  
DOCUMENT  
FOLKLORE  
FEATURE  
FOLKM  
FOLKLORE  
DOCUMENT  
Folk music  
Documentaries  
DOKUMENT  
18  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS oprations  
Emergency broadcast  
If an emergency broadcast is received, all the  
function mode operations are stopped.  
“ALARM” appears in the display and the  
emergency broadcast can be heard.  
CD Operations  
Loading a CD  
Insert a CD into the centre of the CD SLOT with  
the labeled side facing up. “LOADING” appears  
in the display, the CD enters into the slot, and  
the play starts.  
●Cancelling an emergency broadcast  
For CD (12 cm)  
For single CD (8 cm)  
CD SLOT  
If you press the [AF] button, emergency  
broadcast reception is cancelled.  
Switching the PTY display language  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY  
displayed in the display.  
∗ The factory default setting is “ENGLISH”.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
Notes:  
• Never insert foreign objects into the CD SLOT.  
• If the CD is not inserted easily, there may be  
another CD in the mechanism or the unit may  
require service.  
2. Press the [a] or [d] button and select  
“LANGUAGE”.  
• Discs not bearing the  
CD-ROMs cannot be played by this unit.  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
Loading 8 cm compact discs  
or  
mark and  
3. Press the [  
] button.  
4. Turn the [ROTARY] knob clockwise or  
counterclockwise to select the desired  
language.  
5. Press the [  
] button.  
∗ No adapter is required to play an 8 cm CD.  
6. Press the [T] button to return to the previous  
∗ Insert the 8 cm CD into the centre of the insertion  
slot.  
mode.  
Volume setting of TA, emergency  
Listening to a CD already inserted  
Press the [FNC] button to select the CD mode.  
Play starts automatically. If no CD is loaded in  
the unit, “NO DISC” appears in the display.  
broadcast (ALARM) and PTY  
The volume for TA, ALARM and PTY interrupts  
can be set during TA, ALARM or PTY interrupt.  
∗ The factory default setting is “15”.  
During a TA, ALARM or PTY interrupt, turn the  
[ROTARY] knob clockwise or counterclockwise  
to set the volume to the desired level (0 to 33).  
∗ When the TA, ALARM or PTY interrupt ends, the  
volume returns to the level it had before the  
interrupt.  
Pausing play  
1. Press the [  
] button to pause play.  
“PAUSE” appears in the display.  
2. To resume CD play, press the [  
again.  
] button  
DXZ448R  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Operations  
Top function  
The top function resets the CD player to the first  
track of the disc. Press the [BND] button to play  
the first track (track No. 1) on the disc.  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
1. Press the [DISP] button to display the title.  
2. Each time you press and hold the [DISP]  
button for 1 second or longer, the title display  
changes in the following order:  
Scan play  
The scan play locates and plays the first 10  
seconds of each track on a disc automatically.  
This function continues on the disc until it is  
cancelled.  
User title (disc) ➜ CD-text title (disc) ➜ Artist  
name ➜ CD-text title (track) ➜ User title  
(disc)...  
Note:  
∗ The scan play is useful when you want to select a  
• If the CD playing is not a CD-text CD or no user  
title has been input, “NO TITLE” appears in the  
display.  
desired track.  
1. Press the [SCN] button to start scan play.  
“SCN” lights in the display.  
2. To cancel the scan play, press the [SCN]  
button again. “SCN” goes off from the display  
and the current track continues to play.  
Ejecting a CD  
1. Press the [Q] to eject the CD. Take it out  
from the ejected position.  
Note:  
Repeat play  
The repeat play continuously plays the current  
track. This function continues automatically until  
it is cancelled.  
• If you force a CD into before auto reloading, this  
can damage the CD.  
∗ If a CD (12 cm) is left in the ejected position for  
15 seconds, the CD is automatically reloaded  
(Auto reload).  
1. Press the [RPT] button. “RPT” lights in the  
∗ 8 cm CDs are not auto reloaded. Be sure to  
remove it when ejected.  
display and the current track is repeated.  
2. To cancel the repeat play, press the [RPT]  
button again. “RPT” goes off from the display  
and normal play resumes.  
Selecting a track  
●Track-up  
1. Press the [d] button to move ahead to the  
Random play  
beginning of the next track.  
The random play selects and plays individual  
tracks on a disc in no particular order. This  
function continues automatically until it is  
cancelled.  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
●Track-down  
1. Press the [RDM] button. “RDM” lights in the  
display, an individual track is selected  
randomly and play begins.  
1. Press the [a] button to move back to the  
beginning of the current track.  
2. To cancel the random play, press the [RDM]  
button again. “RDM” goes off from the display  
and normal play resumes.  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
Fast-forward/fast-backward  
●Fast-forward  
Press and hold the [d] button for 1 second or  
longer.  
●Fast-backward  
Press and hold the [a] button for 1 second or  
longer.  
20  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations Common to Each Mode  
3. Turn the [ROTARY] knob clockwise or  
Dimmer control  
counterclockwise to select the setting. Each  
time you turn the [ROTARY] knob, the setting  
changes in the following order:  
You can set the dimmer control “ON” or “OFF”.  
∗ The factory default setting is “ON”.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
OFF ➜ ON ➜ MUTE ➜ OFF...  
● OFF:  
This unit continues normal operation even  
when the cellular phone is used.  
2. Press the [a] or [d] button to select  
“DIMMER”.  
Note:  
3. Turn the [ROTARY] knob clockwise or  
counterclockwise and select “ON” or “OFF”.  
• If connecting a hands-free kit, please ensure the  
setting is ON to receive the telephone audio  
through the system.  
4. Press the [T] button to return to the previous  
mode.  
● ON:  
You can listen to your telephone calls from  
the speakers connected to this unit.  
Setting the car speaker output for  
the cellular phone (Optional TEL-002)  
∗ When listening to your calls on your car  
speakers, you can adjust the volume by  
turning the [ROTARY] knob.  
∗ The factory default setting is “RIGHT”.  
∗ To output the telephone calls, set the cellular  
phone interrupt to ON.  
● MUTE:  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
The sound from this unit is muted during  
telephone calls.  
4. Press the [T] button to return to the previous  
2. Press the [a] or [d] button to select “TEL-  
SP”.  
mode.  
3. Turn the [ROTARY] knob clockwise to select  
“RIGHT” or counterclockwise to select “LEFT”.  
Turning the screen saver function  
on or off  
This unit is provided with the screen saver  
function which allows you to show various kinds  
of patterns and characters in the Operation  
Status indication area of the display in a random  
order.You can turn on and off this function.  
● RIGHT:  
Telephone calls can be heard on the front  
right speaker connected to this unit.  
● LEFT:  
Telephone calls can be heard on the front left  
speaker connected to this unit.  
If the button operation is performed with the  
screen saver function on, the operation display  
corresponding to the button operation is shown  
for about 30 seconds and the display returns to  
the screen saver display.  
4. Press the [T] button to return to the previous  
mode.  
Cellular phone interrupt setting  
If you connect this unit and your cellular phone  
with a separately sold unit (TEL-002), you can  
listen to your telephone calls on your car speakers.  
∗ The factory default setting is “SS”.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
∗ The factory default setting is “OFF”.  
2. Press the [a] or [d] button and select  
“SCRN SVR”.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
3. Press the [  
] button.  
4. Turn the [ROTARY] knob clockwise or  
counterclockwise to select the setting. Each  
time you turn the [ROTARY] knob, the setting  
changes in the following order:  
2. Press the [a] or [d] button to select “TEL-  
SW”.  
OFF ➜ SS ➜ MESSAGE.  
5. Press the [  
] button to store the setting.  
6. Press the [T] button to return to the previous  
mode.  
DXZ448R  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations Common to Each Mode  
Entering titles  
Setting the method for title scroll  
Set how to scroll in CD-TEXT.  
∗ The factory default setting is “ON”.  
Titles up to 8 characters long can be stored in  
memory and displayed for CD, CD changer and  
TV stations. The number of titles that can be  
entered for each mode are as follows.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
Mode  
Number of titles  
50 titles  
2. Press the [a] or [d] button and select  
“SCROLL”.  
CD mode  
TV mode  
20 titles  
3. Turn the [ROTARY] knob clockwise or  
counterclockwise and select “ON” or “OFF”.  
CD changer mode  
DCZ628 connected  
CDC655Tz connected  
CDC1255z connected  
Number of titles  
100 titles  
● ON:  
100 titles  
50 titles  
To scroll automatically.  
● OFF:  
To scroll just 1 time when the title was  
changed or the title key was pressed.  
1. Press the [FNC] button to select the mode  
you want to enter a title (CD, CD changer or  
TV).  
4. Press the [T] button to return to the previous  
mode.  
2. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
enter the title.  
Selecting the CONTRAST mode  
∗ The factory default setting is “5”.  
3. Press the [DISP] button and display the sub.  
4. Press the [T] button.  
1. Press and hold the button [T] for 1 second or  
longer to switch to the adjustment selection  
display.  
5. Press the [a] or [d] button to move the  
cursor.  
2. Press the [a] or [d] button to select  
“CONTRAST”.  
6. Press the [DISP] button to select a character.  
Each time you press the [DISP] button, the  
character changes in the following order:  
3. Turn the [ROTARY] knob to select from 1-8.  
Capital letters ➜ Numbers ➜ Symbols ➜  
Umlaut ➜ Capital letters...  
4. Press the [T] button to return to the previous  
mode.  
7. Turn the [ROTARY] knob to select the  
desired character.  
Entering MESSAGE INFORMATION  
Message up to 30 characters long can be stored  
in memory and displayed as a type of screen  
saver setting.  
∗ The factory default setting is “WELCOME TO  
CLARION”.  
8. Repeat steps 5 to 7 to enter up to 8  
characters for the title.  
9. Press and hold the [  
] button for 2  
seconds or longer to store the title into  
memory and cancel title input mode.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
Clearing titles  
1. Select and play a CD in the CD changer or  
tune in to a TV station for which you want to  
clear the title.  
2. Press the [a] or [d] button and select  
“INPUT”.  
2. Press the [DISP] button and display the sub.  
3. Press the [  
] button.  
3. Press the [T] button and switch the display to  
4. Press the [a] or [d] button to move the  
the title input display.  
cursor.  
4. Press the [BND] button.  
5. Press the [DISP] button to select a character.  
Each time you press the [DISP] button, the  
character changes in the following orders:  
5. Press and hold the [  
] button for 2  
seconds or longer to clear the title and  
cancel title input mode.  
Capital letters ➜ Numbers ➜ Symbols ➜  
Umlaut ➜ Capital letters…  
22  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations Common to Each Mode  
6. Turn the [ROTARY] knob to select the  
desired character.  
7. Repeat step 4 to 6 to enter up to 30  
characters for message.  
8. Press and hold the [  
] button for 2  
seconds or longer to store the message in  
memory and cancel input message mode.  
∗ Press the [BND] button can cancel the input  
message. Then press and hold the [  
]
button for 2 seconds or longer to store the  
message and the message return to default  
setting.  
9. Press the [T] button to return to the previous  
mode.  
DXZ448R  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. OPERATIONS OF ACCESSORIES  
CD Changer Operations  
Notes:  
CD changer functions  
• If the CD playing is not a CD-text CD or no user  
When an optional CD changer is connected  
title has been input, “NO TITLE” appears in the  
through the CeNET cable, this unit controls all  
display.  
CD changer functions. This unit can control a  
total of 2 changers.  
• If a CD-text CD is not input its disc title or a track  
title, “NO TITLE” appears in the display.  
Press the [FNC] button and select the CD  
changer mode to start play. If 2 CD changers  
are connected, press the [FNC] button to select  
the CD changer for play.  
∗ If “NO MAG” appears in the display, insert the  
magazine into the CD changer. “DISC CHK”  
appears in the display while the player loads  
(checks) the magazine.  
Procedure to scroll a title  
Set “SCROLL” to “ON” or “OFF”.  
(The factory default setting is “ON”. Refer to the  
subsection “Turning the screen saver function  
on or off” in section “Operation common to  
each mode”.)  
●When set to “ON”  
∗ If “NO DISC” appears in the display, eject the  
magazine and insert discs into each slot. Then,  
reinsert the magazine back into the CD changer.  
The title is automatically kept scrolling.  
●When set to “OFF”  
Note:  
To scroll just 1 time when the title was changed  
or the [T] button was pressed.  
• Some CDs recorded in CD-R/CD-RW mode may  
not be usable.  
CAUTION  
CD-ROM discs cannot be played from every  
CD changer, it’s depended on the model.  
Selecting a CD  
Press the [DN] or the [UP] button to select the  
desired disc.  
∗ If a CD is not loaded in a slot of magazine,  
pressing the [UP] or the [DN] button cannot work.  
Pausing play  
1. Press the [  
] button to pause play.  
Selecting a track  
“PAUSE” appears in the display.  
●Track-up  
2. To resume play, press the [  
] button again.  
1. Press the [d] button to move ahead to the  
beginning of the next track.  
Displaying CD titles  
This unit can display title data for CD-text CDs  
and user titles input with this unit.  
2. Each time you press the [d] button, the  
track advances ahead to the beginning of the  
next track.  
∗ Title data for CD-text CDs can be displayed with  
this unit only when it is connected to CDC655Tz.  
●Track-down  
1. Press the [a] button to move back to the  
●When connected to DCZ628 or CDC1255z.  
Press the [DISP] button to display the title.  
●When connected to CDC655Tz  
beginning of the current track.  
2. Press the [a] button twice to move to the  
beginning of the previous track.  
1. Press the [DISP] button to display the title.  
2. Each time you press and hold the [DISP]  
button for 1 second or longer, the title display  
changes in the following order:  
Fast-forward/fast-backward  
●Fast-forward  
Press and hold the [d] button for 1 second or  
User title (disc) ➜ CD-text title (disc) ➜ Artist  
name ➜ CD-text title (track) ➜ User title  
(disc)…  
longer.  
●Fast-backward  
Press and hold the [a] button for 1 second or  
longer.  
24  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Changer Operations  
Random play  
Random play selects and plays individual tracks  
on the disc in no particular order. This function  
continues automatically until it is cancelled.  
Scan play  
Scan play locates and plays the first 10 seconds  
of each track on a disc automatically. This  
function continues on the disc until it is  
cancelled.  
1. Press the [RDM] button. “RDM” lights in the  
∗ The scan play is useful when you want to select a  
desired track.  
display and random play begins.  
2. To cancel random play, press the [RDM]  
button again. “RDM” goes off from the display  
and normal play resumes.  
1. Press the [SCN] button to start track  
scanning. “SCN” lights in the display.  
2. To cancel the scan play, press the [SCN]  
button again. “SCN” goes off from the display  
and the current track continues to play.  
Disc random play  
The disc random play selects and plays  
individual tracks or discs automatically in no  
particular order. This function continues  
automatically until it is cancelled.  
Disc scan play  
Disc scan play locates and plays the first 10  
seconds of the first track on each disc in the  
currently selected CD changer. This function  
continues automatically until it is cancelled.  
1. Press and hold the [RDM] button for 1  
second or longer. “DISC” and “RDM” light in  
the display and disc random play starts.  
∗ Disc scan play is useful when you want to select a  
desired CD.  
2. To cancel disc random play, press the [RDM]  
button again. “DISC” and “RDM” go off from  
the display and normal play resumes from  
the current track.  
1. Press and hold the [SCN] button for 1  
second or longer. “DISC” and “SCN” light in  
the display and disc scan play starts.  
2. To cancel disc scan play, press the [SCN]  
button again. “DISC” and “SCN” go off from  
the display and the current track continues to  
play.  
Repeat play  
Repeat play continuously plays the current track.  
This function continues automatically until it is  
cancelled.  
1. Press the [RPT] button. “RPT” lights in the  
display and the current track is repeated.  
2. To cancel repeat play, press the [RPT] button  
again. “RPT” goes off from the display and  
normal play resumes.  
Disc repeat play  
After all the tracks on the current disc have been  
played, disc repeat play automatically replays  
the current disc over from the first track. This  
function continues automatically until it is  
cancelled.  
1. Press and hold the [RPT] button for 1 second  
or longer. “DISC” and “RPT” light in the  
display and disc repeat play starts.  
2. To cancel disc repeat play, press the [RPT]  
button again. “DISC” and “RPT” go off from  
the display and normal play resumes on the  
current track.  
DXZ448R  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Operations  
1. Press the [BND] button and select the  
TV tuner functions  
desired band (TV1 or TV2).  
When an optional TV tuner is connected through  
the CeNET cable, this unit controls all TV tuner  
functions. To watch TV requires a TV tuner and  
monitor.  
∗ If “MANU” is not lit in the display, press and  
hold the [BND] button for 1 second or longer.  
“MANU” lights in the display and manual  
tuning is now available.  
2. Tune into a station.  
Watching a TV  
●Quick tuning:  
1. Press the [FNC] button and select the TV  
Press and hold the [a] or [d] button for 1  
mode.  
second or longer to tune in a station.  
2. Press the [BND] button to select the desired  
TV band (TV1 or TV2). Each time the button  
is pressed, the input selection toggles  
between TV1 and TV2.  
●Step tuning:  
Press the [a] or [d] button to manually  
tune in a station.  
∗ If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
3. Press the [a] or [d] button to tune in the  
desired TV station.  
Watching a video  
Recalling a preset station  
A total of 12 TV stations can be stored (6-TV1  
and 6-TV2). This allows you to select your  
favorite TV stations and store them in memory  
for later recall.  
The TV tuner has a VTR input terminal to which  
1 external device can be connected. Connect a  
12 V video cassette player (VCP) or video  
cassette recorder (VCR) to the TV tuner input  
terminal.  
1. Press the [BND] button and select the  
1. Press the [  
2. To return to the TV broadcast, press the  
] button.  
] button to select VTR.  
desired TV band (TV1 or TV2).  
2. To recall a stored TV station, press the  
[
desired [DIRECT] button to select that station.  
∗ Press and hold one of the [DIRECT] buttons  
for 2 seconds or longer to store the current  
station into preset memory.  
Tuning  
There are 3 types of tuning mode available,  
Seek tuning, manual tuning and preset tuning.  
Manual memory  
1. Select the desired station with seek tuning,  
manual tuning or preset tuning.  
Seek tuning  
1. Press the [BND] button and select the  
desired TV band (TV1 or TV2).  
2. Press and hold one of [DIRECT] buttons for  
2 seconds or longer to store the current  
station into preset memory.  
∗ If “MANU” is lit in the display, press and hold  
the [BND] button for 1 second or longer.  
“MANU” in the display goes off and seek  
tuning is now available.  
Auto store  
Auto store selects 6 TV stations automatically  
and stores each one into preset memory.  
2. Press the [a] or [d] button to automatically  
seek a station. Press the [d] button to auto-  
matically tune up the frequency band to the  
next available TV station; press the [a]  
button to automatically tune down.  
If there are not 6 stations with good reception,  
stations previously stored in memory remain  
and only the strong stations are stored into  
memory.  
Manual tuning  
1. Press the [BND] button and select the  
There are 2 ways available: Quick tuning and  
step tuning.  
desired TV band (TV1 or TV2).  
2. Press and hold the [P/A] button for 2  
seconds or longer. The stations with good  
reception are stored automatically to the  
preset channels.  
When you are in the step tuning mode, the  
frequency changes one step at a time. In the  
quick tuning mode, you can quickly tune the  
desired frequency.  
26  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Operations  
Digital Radio / DAB Operations  
DAB control function  
Preset scan  
When a CeNET cable is used to connect a DAB  
(DAH913 or DAH923) (sold separately), all  
functions can be operated.  
Preset scan allows the user to view each preset  
position before it automatically advances to the  
next preset. This function is useful for searching  
for a desired TV station in memory.  
1. Press the [P/A] button.  
Listening to the DAB station  
1. Press the [FNC] button to select the DAB  
mode.  
2. When the desired station is found, press the  
[P/A] button again to remain tuned to that  
station.  
2. When the unit receives a DAB station, the  
display changes in the following order:  
Note:  
• Do not press and hold the [P/A] button for 2  
seconds or longer. Doing so will trigger the auto  
store function and start storing stations into  
memory.  
Frequency channel ➜ service label  
Setting the TV area  
When you select the TV area (TV reception  
area), the TV tuner area setting changes.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
Switching displays  
Press the [DISP] button to select the desired  
display.  
2. Press the [a] or [d] button to select “TV  
AREA”.  
Each time you press the [DISP] button, the  
display switches in the following order:  
3. Press the [  
] button.  
4. Turn the [ROTARY] knob clockwise or  
Main display  
counterclockwise to select the reception area.  
5. Press the [  
] button.  
6. Press the [T] button to return to the previous  
mode.  
Sub display  
Setting the TV diver  
You can change the reception setting for the TV  
antenna connected to the TV tuner.  
1. Press and hold the [T] button for 1 second or  
longer to switch to the adjustment selection  
display.  
Clock (CT) display  
2. Press the [a] or [d] button to select “TV  
DIVER”.  
3. Turn the [ROTARY] knob clockwise to set to  
“ON” or counterclockwise to set to “OFF”.  
Main display  
Note:  
● ON:  
• The display shown in the normal reception mode  
and the preset reception mode is the same when  
a DAB station is received.  
Sets reception emphasizing the visual.  
● OFF:  
Sets the diver setting to OFF.  
3. When the unit does not receive a DAB  
station, the display changes in the following  
order:  
4. Press the [T] button to return to the previous  
mode.  
–Normal reception mode–  
DXZ448R  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
–Preset reception mode–  
Programme scan  
This function scans through each receivable  
programme in a DAB station being received for  
10 seconds sequentially. This is useful when you  
want to search for a desired programme.  
1. Press the [FNC] button to receive a DAB station.  
2. Perform the following operation depending  
on the connected model.  
Press the [P/A] button. “SERV SCN” lights up  
and the unit starts scanning each  
programme for 10 seconds sequentially.  
Each time the main unit scans, the  
programme name is shown in the display.  
Notes:  
• The number of programmes and broadcasting  
times depend on the DAB stations.  
• When the strength of DAB signals is weak, audio  
output is muted.  
3. To stop programme scan when a desired  
programme is tuned in.  
Press the [P/A] button.  
Seek tuning  
1. Press the [FNC] button to select the DAB mode.  
Manual memory  
The main unit has a manual memory function for  
DAB programmes. Up to 18 programmes (6  
programmes each) can be preset in the preset  
buttons.  
2. Press and hold the [a] or [d] button for 1  
second or longer.  
[M1], [M2] and [M3]  
∗ “SEARCH” appears in the display.  
1. Press the [FNC] button to select the DAB  
mode.  
3. “DAB” lights up in the display when the main  
2. Press the [BND] button to select any one  
unit receives a DAB station.  
shown above.  
* The main unit stops the seek tuning when it  
cannot find a DAB station. The display returns  
to the previous mode.  
3. Press the [a] or [d] button to select a  
desired programme.  
4. Press and hold one of the [DIRECT] buttons  
(1 to 6) for 2 seconds or longer to store the  
programme.  
Manual tuning  
1. Press the [FNC] button to select the DAB mode.  
Note:  
• The interrupt programme (PTY or INFO) cannot  
be written into a manual memory.  
2. Press and hold the [BND] button for 1 second  
or longer. “MANU” lights up in the display.  
3. Press the [a] or [d] button to select a  
Recalling a preset programme  
station.  
1. Press the [FNC] button to select the DAB mode.  
∗ If no operation is performed for more than 7  
seconds, manual tuning is cancelled and the  
display returns to the previous mode.  
2. Press the [BND] button. Each time you press  
the [BND] button, the display changes in the  
following order:  
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...  
Switching programmes  
1. Press the [FNC] button to receive a DAB station.  
3. Press one of the [DIRECT] buttons to recall a  
preset programme.  
Note:  
2. Press the [a] or [d] button to switch  
programmes in the DAB station.  
• Press and hold the [DIRECT] button for 2  
seconds or longer to store the programme  
currently being received. (Manual memory)  
Note:  
• The programme name may be the same  
depending on DAB programmes.  
28  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
●Setting the INFO standby mode  
AF function  
If you press and hold the [TA] button for 1  
second or longer, “INFO” lights in the display  
and the main unit is set into the INFO standby  
mode until the selected announcement is  
broadcast. When the selected announcement  
broadcast starts, the announcement item  
appears in the display. If you press and hold the  
[TA] button for 1 second or longer while the  
selected announcement broadcast is being  
received, the selected announcement broadcast  
reception is cancelled and the main unit goes  
into the INFO standby mode.  
The AF function switches to a different  
frequency on the same network in order to  
maintain optimum reception.  
∗ The factory default setting is “ON”  
∗ If the reception of the current broadcast station  
deteriorates, “SEARCH” appears in the display  
and the radio searches for the same programme  
on another frequency.  
∗ For details on “AF function”, refer to the section  
“RDS operation” of each owner’s manual.  
●Switching OFF the AF function  
●Switching ON the AF function  
●AF function between RDS and DAB  
●Cancelling INFO standby mode  
To cancel the INFO standby mode, press and  
hold the [TA] button for 1 second or longer.  
When the same programme is broadcast by  
both RDS and DAB, and this function is ON, the  
main unit switches to receiving the broadcast  
with the better reception automatically.  
●Information select  
This is a function for selecting INFORMATION  
ON or OFF in the Information interrupt mode.  
You can set ON up to 6 information items.  
TA (Traffic Announcement)  
In the TA standby mode, when a traffic  
You can select any of the 6 items below:  
announcement broadcast starts, the traffic  
announcement broadcast is received as top  
priority regardless of the function mode. Traffic  
programme (TP) automatic tuning is also possible.  
∗ This function can only be used when “TP” is lit in  
the display. When “TP” is lit, this means that the  
DAB or RDS broadcast station being received has  
traffic announcement programmes.  
INFORMATION item  
ENGLISH  
TRAVEL  
WARNING  
NEWS  
Contents  
Transport flash  
Warning / Service  
News flash  
WEATHER  
EVENT  
Area weather flash  
Event announcement  
Special event  
∗ For details on “TA”, refer to the section “RDS  
operation” of each owner’s manual.  
SPECIAL  
●Setting the TA standby mode  
●Cancelling the TA standby mode  
●Searching for a TP station  
Notes:  
1. Perform the following operation depending  
on the connected model.  
Press and hold the [T] button for 1 second  
or longer.  
• If a TP station is not received, the main unit stops  
the search operation.  
• “TP” may be lit in the display when a TP  
broadcast is transmitted from an RDS station. In  
this case, press the [TA] button to perform TP  
seek tuning. Press the [TA] button again to return  
to the previous mode.  
2. Press the [a] or [d] button to select “INFO  
SEL”, then press the [  
“INFO SEL” mode.  
] button to enter  
3. Press the [a] or [d] button to select an  
information item.You can select any of 6  
items:  
TRAVEL ➜ WARNING ➜ NEWS ➜  
WEATHER ➜ EVENT ➜ SPECIAL ➜  
TRAVEL ➜ ...  
INFO (Announcement)  
In the INFO standby mode, when the selected  
announcement programme starts, the main unit  
switches to the selected announcement  
programme automatically.  
4. Perform the following operation depending  
on the connected model.  
Turn the [ROTARY] knob clockwise or  
counterclock wise to set the information item  
for ON or OFF.  
5. Press the [  
] button to store the setting.  
6. Press the [T] button to return to the previous  
display.  
DXZ448R  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digital Radio / DAB Operations  
PTY  
Volume setting of TA, INFO,  
This function enables you to listen to the  
selected programme type, irrespective of the  
function mode.  
∗ One common PTY can be selected for DAB or  
RDS.  
∗ Of DAB PTY and RDS PTY, the PTY which is  
received earlier takes priority over the other.  
∗ PTY broadcasts are not yet available in all  
countries.  
∗ In the INFO standby mode, INFO stations have  
priority over PTY stations.  
emergency broadcast (ALARM) and  
PTY  
The volume for TA, INFO, ALARM and PTY  
interrupts can be set during TA, INFO, ALARM  
and PTY interrupt. Perform the following  
operation depending on the connected model.  
∗ The factory default setting is “15”.  
During a TA, INFO, ALARM or PTY interrupt,  
turn the [ROTARY] knob clockwise or  
counterclockwise to set the volume to a desired  
level (0 to 33).  
∗ In the TA standby mode, TP stations have priority  
over PTY stations.  
∗ When the TA, INFO, ALARM or PTY interrupt  
ends, the volume returns to the level it had before  
the interrupt.  
∗ For details on “PTY”, refer to the section “RDS  
operation” of each owner’s manual.  
●Setting the PTY standby mode  
●Cancelling the PTY standby mode  
●Cancelling a PTY interrupt broadcast  
●Selecting PTY  
●PTY seek  
●PTY preset memory  
Emergency broadcast  
When an emergency broadcast is received, all  
the function mode operations are stopped.  
“ALARM” appears in the display and the  
emergency broadcast can be heard.  
∗ For details on “Emergency broadcast”, refer to  
the section “RDS operation” of each owner’s  
manual.  
●Cancelling an emergency broadcast  
Switching the PTY and INFO display  
language  
You can select one of 4 languages (English,  
German, Swedish or French) for the PTY and  
INFO shown in the display.  
∗ The factory default setting is “ENGLISH”.  
∗ For details on “Switching the PTY display  
language”, refer to the section “RDS operation”  
of each owner’s manual.  
30  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
8. IN CASE OF DIFFICULTY  
Problem  
Cause  
Fuse is blown.  
Measure  
Power does not turn  
on.  
(No sound is pro-  
duced.)  
Replace with a fuse of the same amperage. If  
the fuse blows again, consult your store of  
purchase.  
Incorrect wiring.  
Consult your store of purchase.  
No sound output  
Power antenna lead is shor- 1. Turn the unit off.  
ted to ground or excessive 2. Remove all wires attached to the power  
when operating the  
unit with amplifiers or current is required for re-  
power antenna at-  
tached.  
antenna lead. Check each wire for a possible  
short to ground using an ohm meter.  
3. Turn the unit back on.  
mote-on the amplifiers or  
power antenna.  
4. Reconnect each amplifier remote wire to the  
power antenna lead one by one. If the  
amplifiers turn off before all wires are  
attached, use an external relay to provide  
remote-on voltage (excessive current  
required).  
Nothing happens  
when buttons are  
pressed.  
The microprocessor has  
Turn off the power, then  
malfunctioned due to noise, press the [RELEASE]  
etc.  
button and remove the  
DCP.  
Press the reset button for  
about 2 seconds with a  
thin rod.  
Display is not accu-  
rate.  
Reset button  
DCP or main unit connec-  
tors are dirty.  
Wipe the dirt off with a soft cloth moistened with  
cleaning alcohol.  
Compact disc cannot Another compact disc is al- Eject the compact disc before loading the new  
be loaded.  
ready loaded.  
one.  
Sound skips or is noi- Compact disc is dirty.  
sy.  
Clean the compact disc with a soft cloth.  
Compact disc is heavily  
scratched or warped.  
Replace with a compact disc with no scratches.  
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.  
after power is turned the internal lens when the  
on.  
car is parked in a humid  
place.  
DXZ448R  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. ERROR DISPLAYS  
If an error occurs, one of the following displays is displayed.  
Take the measures described below to eliminate the problem.  
Error Display  
ERROR 2  
Cause  
Measure  
A CD is caught inside the CD deck and is  
not ejected.  
This is a failure of CD deck’s mechanism and  
consult your store of purchase.  
ERROR 3  
ERROR 6  
ERROR 2  
ERROR 3  
ERROR 6  
ERROR 2  
ERROR 3  
ERROR 6  
A CD cannot be played due to scratches,  
etc.  
Replace with a non-scratched,  
non-warped-disc.  
A CD is loaded upside-down inside the CD  
deck and does not play.  
Eject the disc then reload it properly.  
A CD inside the CD changer is not loaded.  
This is a failure of CD changer’s mechanism  
and consult your store of purchase.  
A CD inside the CD changer cannot be  
played due to scratches, etc.  
Replace with a non-scratched, non-warped  
disc.  
A CD inside the CD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly.  
A DISC inside the DVD changer cannot be  
played.  
This is a failure of DVD mechanism and  
consult your store of purchase.  
A DISC cannot be played due to scratches,  
etc.  
Retry or replace with a non-scratched, non-  
warped-disc.  
A DISC inside the DVD changer cannot be  
played because it is loaded upside-down.  
Eject the disc then reload it properly  
Set the correct Parental level.  
ERROR P  
ERROR R  
Parental level error  
Region code error  
Eject the disc and replace correct region  
code disc.  
AMP GRD  
The speaker protection circuit is operating.  
During this operation, if any volume  
operation is performed, the display shows  
“AMP GRD”.  
1. Turn down sound volume. Function can  
also be restored by turning the power off  
and on again.  
(Speaker volume is reduced automatically  
when the speaker protection circuit  
operates).  
2. If the sound is muted again, consult our  
service department.  
If an error display other than the ones described above appears, press the reset button. If the problem  
persists, turn off the power and consult your store of purchase.  
32  
DXZ448R Download from Www.Somanuals.com. All Manuals Search And Download.  
10. SPECIFICATIONS  
Radio section  
Tuning System: PLL synthesizer tuner  
General  
Output Power: 4 ✕ 27 W (DIN 45324, +B=14.4V)  
Receiving Frequencies:  
Power Supply Voltage:  
FM : 87.5 to 108 MHz (0.05 MHz steps)  
MW : 531 to 1602 kHz (9 kHz steps)  
LW : 153 to 279 kHz (3 kHz steps)  
14.4 V DC (10.8 to 15.6 V allowable),  
negative ground  
Power Consumption: Less than 15 A  
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)  
Auto Antenna Rated Current: 500 mA or less  
CD player section  
System: Compact disc digital audio system  
Weight:  
Main unit: 1.2 kg  
Frequency Response: 10 Hz to 20 kHz ( 1 dB)  
Signal to Noise Ratio: 100 dB (1 kHz)  
Dynamic Range: 95 dB (1 kHz)  
Distortion: 0.01%  
Dimensions:  
Main unit :  
178 (W) ✕ 50 (H) ✕ 155 (D) mm  
Note:  
• Specifications and design are subject to change without notice for further improvement.  
DXZ448R  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics Automobile Electronics CDR 840 User Manual
Control4 Stereo Amplifier C4 8AMP1 B User Manual
Crate Amplifiers Stereo Amplifier VTX200 User Manual
Cypress Computer Hardware CY7C1020BN User Manual
DXG Technology Digital Camera DXG 502 User Manual
Dynex CRT Television DX 15E220A12 User Manual
Electro Voice Automobile Alarm CPS 3 User Manual
Electro Voice Microphone N D267a User Manual
Fellowes Paper Shredder 225CI 225I User Manual
Field Controls Ventilation Hood SWG User Manual