Digital solDering station
Model 96531
set up anD operating instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed Exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
read this material before using this product.
Failure to do so can result in serious injury.
saVe this Manual.
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Download from Www.Somanuals.com. All Manuals Search And Download.
saVe this Manual
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number
in the back of the manual near the assembly diagram (or month and year of purchase if
product has no number). Keep this manual and the receipt in a safe and dry place for
future reference.
iMportant saFetY inForMation
in this manual, on the labeling, and all other information
provided with this product:
this is the safety alert symbol. it is used to alert you to potential
personal injury hazards. obey all safety messages that follow this
symbol to avoid possible injury or death.
Danger indicates a hazardous situation
which, if not avoided, will result in death or
DANgEr
serious injury.
Warning indicates a hazardous situation
which, if not avoided, could result in death
WArNINg
or serious injury.
caution, used with the safety alert
symbol, indicates a hazardous situation
CAUTION
which, if not avoided, could result in minor
or moderate injury.
notice is used to address practices not
related to personal injury.
Notice
caution, without the safety alert symbol,
is used to address practices not related to
CAUTION
personal injury.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
general saFetY rules
Warning! read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTrUCTIONS
1.
Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases or dust. The intense heat from the Solder-
ing Station may ignite the dust or fumes.
c. Operate this power tool only in a well-ventilated area. Be extremely careful
not to breathe vapors from any solder, especially ones containing lead. Lead
is a heavy metal which can accumulate in the body and cause serious health
problems.
d. keep children and bystanders away while operating a power tool. Dis-
tractions can cause you to lose control.
2.
electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unmodi-
fied plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d. Do not abuse the cord. never use the cord for carrying, pulling or un-
plugging the power tool. keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric
shock.
e. Never operate this power tool outdoors.
3.
personal safety
a. Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
b. use safety equipment. always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, heavy-duty work gloves,
hard hat, or hearing protection used for appropriate conditions will re-
duce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off-position before plug-
ging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
d. Do not overreach. Keep proper footing and balance at all times. This en-
ables better control of the power tool in unexpected situations.
e. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth-
ing and gloves away from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
4.
power tool use and care
a. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be re-
paired.
c. Disconnect the plug from the power source and from the power tool
before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d. store idle power tools out of the reach of children and do not allow per-
sons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a
hazardous situation.
5.
service
a. Have your power tool serviced by a qualified repair person using only identi-
cal replacement parts. This will ensure that the safety of the power tool is
maintained.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
speciFic saFetY rules
1.
Maintain labels and nameplates on the tool. These carry important safety infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.
3.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
Do not leave the tool unattended when it is plugged into an electrical outlet. Turn
off the tool, and unplug it from its electrical outlet before leaving. Make sure sol-
dering wire is not connected to tool that is plugged in.
4.
Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
5.
6.
Use in well-ventilated area only and keep out of reach of children.
People with pacemakers should consult their physician(s) before use. Electro-
magnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure.
7.
ꢀ.
9.
WArNINg: This product, when used for welding, plasma cutting, soldering,
or similar applications, produces chemicals known to the State of California to
cause cancer and birth defects (or other reproductive harm). (California Health &
Safety Code § 25249.5, et seq.)
Use caution when handling the Soldering Tip; it comes to a sharp point and is
especially dangerous when heated. The soldering tip can generate temperatures
up to 896°F, always use caution when working with this tool and keep flammable
items at a clear, safe distance.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
grounDing
improperly connecting grounding wire can result in electric
shock.
WArNINg
Check with qualified electrician if you are in doubt as to
whether outlet is properly grounded. Do not modify power
cord plug provided with the tool. never remove grounding
prong from the plug. Do not use tool if power cord or plug is
damaged. if damaged, have it repaired by a service facility
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
before use. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
grounded tools: tools with three prong plugs
1.
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (see 3-prong plug and outlet.)
2.
3.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal. (see 3-prong plug and outlet.)
The tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration.
(see 3-prong plug and outlet.)
3-prong plug and outlet
outlets for 2-prong plug
Double insulated tools: tools with two prong plugs
1.
Tools marked “Double Insulated” do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Stan-
dard Association, and the National Electrical Code.
(see outlets for 2-prong plug.)
2.
1.
Double insulated tools may be used in either of the 120 volt outlets shown in the
preceding illustration. (see outlets for 2-prong plug.)
extension cords
Grounded tools require a three wire extension cord. Double insulated tools can
use either a two or three wire extension cord.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
As the distance from the supply outlet increases, you must use a heavier gauge
extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
(see table a.)
The smaller the gauge number of the wire, the greater the capacity of the cord.
For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.
(see table a.)
4.
5.
When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required. (see table a.)
If you are using one extension cord for more than one tool, add the nameplate
amperes and use the sum to determine the required minimum cord size.
(see table a.)
6.
7.
If you are using an extension cord outdoors, make sure it is marked with the suf-
fix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
Make sure the extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified elec-
trician before using it.
ꢀ.
Protect the extension cords from sharp objects, excessive heat, and damp or wet
areas.
recoMMenDeD MiniMuM Wire gauge For eXtension corDs* (120/240 Volt)
naMeplate
eXtension corD length
aMperes
(at full load)
25 Feet
50 Feet
75 Feet
100 Feet
150 Feet
0 – 2.0
2.1 – 3.4
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
14
12
1ꢀ
1ꢀ
1ꢀ
16
14
12
10
1ꢀ
1ꢀ
16
14
12
10
-
1ꢀ
16
14
12
10
-
16
14
12
12
-
3.5 – 5.0
5.1 – 7.0
7.1 – 12.0
12.1 – 16.0
16.1 – 20.0
table a
-
-
-
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
symbology
Double Insulated
Volts Alternating Current
Amperes
V~
a
Canadian Standards Association
Underwriters Laboratories, Inc.
No Load revolutions per Minute
(rPM)
n xxxx/min.
0
speciFications
Electrical Requirements
120 V~ / 60 Hz, .5 Amps
60 Watt
Power Consumption
Temperature range
Power Cord
Fuse
150º~450ºC, 300º~ꢀ40ºF
1ꢀ AWg X 3C
6.3A/250V
Weight
5.1 Pounds
unpacking
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
list of contents
Description
Qty
Soldering Station
1
1
1
Soldering Handle Assembly
Soldering Iron Stand
set up instructions
read the entire iMportant saFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
risk of accidental starting; resulting in serious personal
WArNINg
injury. turn the power switch of the tool to its “oFF”
position and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
assembly
1.
2.
3.
4.
Match up holes in Plug (27) to pins in Cord Connection (6), plug in, and secure
with Cord retainer (26).
handle rest (when cold)
Place Sponge in the bottom of the handle rest
unit.
Set up handle rest unit within easy reach
of the Soldering Station.
solder
Work
area
Plug Soldering Station into any standard,
120V AC electrical outlet.
sponge
handle rest
(when hot)
Functions
The Digital Soldering Station is designed to heat
solder in order to secure wiring and metal surfaces together.
operating instructions
read the entire iMportant saFetY inForMation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
tool set up
1.
Check for breakage, worn parts, damaged cords, or any other condition that may
effect the tool’s operation. If damaged, have the tool serviced by a qualified tech-
nician before using.
2.
3.
Tighten the Tip retainer (16) on the Soldering Iron (15).
Select the correct solder for the intended application. read the directions for the
solder being used to determine what temperature level to set on the Soldering
Station. To minimize the risk of damage to surrounding components, select the
minimum heat required to melt the solder chosen for the application.
4.
Plug Soldering Station in and turn Power Switch (4) to the “ON” position. Turn
the Temperature Dial (ꢀ) and wait until the desired temperature is displayed on
the LCD Display (5) or push one of the Preset Buttons.
• Preset Button 1 = 150ºC (302ºF)
• Preset Button 2 = 270ºC (51ꢀºF)
• Preset Button 3 = 360ºC (6ꢀ0ºF)
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
Place Handle in the Handle rest (black socket) and wait 20 seconds until Solder-
ing Tip heats up.
Work piece set up
1.
2.
If wires are to be soldered, thoroughly clean and scrape the wires so that only the
clean copper is showing. Splice wires that are to be soldered together.
If other metals are to be soldered, thoroughly clean and scrape the metal sur-
faces. It may be necessary to apply acid flux (not included) to clean the metal
surfaces before soldering.
3.
If soldering on printed circuit boards, too much heat can soften the plastic form or
loosen the metal eyelet connections. Use the lowest heat setting possible (see
the solder’s directions) to perform the soldering operation. never use acid core
solder or acid flux on wiring circuits.
4.
5.
Place tip of Soldering Iron (15) under the joint which you are soldering.
If uncertain on how to proceed, it may be wise to practice on a scrap workpiece
first.
general operating instructions
1.
2.
When operating, use only in designated soldering work area.
Apply solder to the joint, wiring, or metal to be soldered, not to the Soldering Tip.
When the metal is hot enough, it will melt the solder and allow it to flow around
the wiring or metal being soldered. Slowly move Soldering Tip around to coat the
entire area being soldered.
3.
4.
5.
When the entire wiring or metal surface is encased in solder, remove the Solder-
ing Tip and place in the handle rest.
Allow the soldering to cool completely before pulling gently on the item to ensure
a secure hold. Blowing air on the soldered joint will help speed up the cooling.
When you are finished soldering, wipe the Soldering Tip thoroughly on the
Sponge and apply a small amount of rosin-core solder to coat the Soldering Tip
and keep it clean.
soldering tips
1.
The soldering process bonds two metal objects together using a metallic bond-
ing material (solder) which has a lower melting point than the items being joined.
Soldering is not appropriate for non-metallic objects such as plastic or wood.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
Check to be sure the objects being joined will not be damaged by the heat of
soldering. This tool generates a temperature up to ꢀ96°F. Test a scrap piece or
inconspicuous area of your work piece with the soldering tip before proceeding.
Be sure the surfaces being soldered are clean before beginning. If necessary,
use a soldering flux (not included) for cleaning. Apply the flux to the parts being
joined, and heat the parts until the flux burns away.
Heat the parts being joined with the soldering tool, not the solder. Once the parts
being joined are sufficiently heated, touch the solder to the work pieces. The
solder will melt and adhere to the work pieces. remove the soldering tip from
the work pieces, and hold the pieces together until they have cooled enough for
the solder to solidify.
5.
Solder will “follow the heat”. Once a workpiece is sufficiently hot to melt the sol-
der, the solder can be dragged along the workpiece by moving the soldering tip.
The solder will follow the heat. This technique is helpful when soldering joints,
such as a tube in a coupling. By applying solder to the edge of the coupling and
then moving the soldering tip away from the edge, solder can be dragged into a
concealed joint as it follows the heat.
Warning: Some solders contain lead and some do not. Be extremely careful not to
breathe vapors from any solder, especially ones containing lead. Lead is a heavy
metal which can accumulate in the body and cause serious health problems.
remember to use in a well-ventilated work area and wear ANSI-approved safety
goggles, heavy-duty work gloves, and a dust mask/respirator during use.
6.
Solder is available in various types. Some solders have a flux core and some do
not. Flux core solders contain flux and reduce the need to clean the work pieces
before joining. Solid core solders do not contain flux, and require careful clean-
ing of the work material, and application of flux for additional cleaning.
7.
Solder is available in various melting points. The heat range of solder may be
expressed in temperature, or may be expressed as “easy,” “medium” or “hard”.
“Easy” solder will melt before “medium”, “medium” will melt before “hard”, and
“hard” will melt at only the highest temperatures. When making several solder
joints on a single workpiece, you may use a mix of solder temperatures.
note: The Anti-Static Ground on the unit is not utilized when the Soldering Station is
equipped with a 3-prong plug.
Maintenance anD serVicing
risk of serious personal injury from accidental starting or
electric shock. turn the power switch of the tool to its “oFF”
WArNINg
position, as marked with an “o” below the power switch
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
(4), and unplug the tool from its electrical outlet before
performing inspection, maintenance, or cleaning procedures.
Damaged equipment can fail, causing personal injury. Do
not use damaged equipment. if abnormal noise or vibration
occurs, have the problem corrected before further use.
cleaning, maintenance, and lubrication
1.
beFore each use, inspect the general condition of the tool. Check for dam-
aged Soldering Iron (15) tip, loose screws, cracked or broken parts, damaged
electrical wiring, and any other condition that may affect its safe operation.
2.
3.
aFter use, clean external surfaces and Soldering Tip.
Warning! if the supply cord of this power tool is damaged, it must be
replaced only by a qualified service technician.
replacing the soldering iron
1.
If Soldering Tip cracks or becomes eroded it must be replaced. The Soldering
Tip cannot heat up properly when cracked or eroded.
tip retainer (16)
heating contact (17)
soldering iron (15)
2.
3.
Turn Power Switch (4) to the “OFF” position and unplug the Soldering Station
from the electrical outlet. Allow adequate time for all surfaces to cool down.
Unscrew Tip retainer (16) that holds the Soldering Iron (15) onto the Heating
Contact (17) and remove the Soldering Iron. It may be necessary to force the
Soldering Iron (15) out of the Tip retainer (16). To do this, place the Soldering
Iron on the side of the work bench, hold the Tip retainer, and push on it towards
the Soldering Tip, forcing it out. Be sure to wear ANSI-approved safety goggles
and heavy-duty work gloves while doing this.
4.
Place new Solder Tip on Heating Contact, replace Retainer, and finger-tighten.
replacing the Fuse
1.
2.
3.
Turn the Power Switch (4) to the “OFF” position, unplug the Soldering Station
from the outlet, and allow time for all surfaces of the unit to cool down completely.
Turn the Soldering Station over and use a screwdriver to remove the cover
marked “FUSE” on the bottom.
remove the old fuse and replace with a new 6.3A/250V fuse of the same type.
replace cover and screw back into place.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
parts list & asseMblY DiagraM
part
1
Description
Upper Cover
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
Base
3
Panel
4
Power Switch
LCD Display
Cord Connection
Anti-Static
5
6
7
ꢀ
Temperature Dial
Cushion
9
10
11
12
13
14
15
16
17
1ꢀ
19
20
21
22
23
24
25
26
27
Power Wire group
Transformer
PCB Board
radiator
Screw Sleeve
Soldering Iron
Tip retainer
Heating Contact
Heat Wire group
grounding Spring
PCB Board
Handle
Handle Sleeve
Handle Tip Sleeve
Fastener
Cord
Cord retainer
Plug
please reaD the FolloWing careFullY
THE MANUFACTUrEr AND/Or DISTrIBUTOr HAS PrOVIDED THE PArTS LIST AND ASSEMBLy DIAgrAM IN
THIS MANUAL AS A rEFErENCE TOOL ONLy. NEITHEr THE MANUFACTUrEr Or DISTrIBUTOr MAKES ANy
rEPrESENTATION Or WArrANTy OF ANy KIND TO THE BUyEr THAT HE Or SHE IS qUALIFIED TO MAKE ANy
rEPAIrS TO THE PrODUCT, Or THAT HE Or SHE IS qUALIFIED TO rEPLACE ANy PArTS OF THE PrODUCT. IN FACT,
THE MANUFACTUrEr AND/Or DISTrIBUTOr EXPrESSLy STATES THAT ALL rEPAIrS AND PArTS rEPLACEMENTS
SHOULD BE UNDErTAKEN By CErTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyEr. THE BUyEr
ASSUMES ALL rISK AND LIABILITy ArISINg OUT OF HIS Or HEr rEPAIrS TO THE OrIgINAL PrODUCT Or
rEPLACEMENT PArTS THErETO, Or ArISINg OUT OF HIS Or HEr INSTALLATION OF rEPLACEMENT PArTS
THErETO.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
liMiteD 90 DaY WarrantY
Harbor Freight Tools Co. makes every effort to assure that its products meet high
quality and durability standards, and warrants to the original purchaser that this prod-
uct is free from defects in materials and workmanship for the period of 90 days from
the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities,
criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WArrANTy IS EXPrESS-
Ly IN LIEU OF ALL OTHEr WArrANTIES, EXPrESS Or IMPLIED, INCLUDINg THE
WArrANTIES OF MErCHANTABILITy AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation of the
complaint must accompany the merchandise. If our inspection verifies the defect, we
will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that
the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission oaks Blvd. • Po Box 6009 • camarillo, cA 93011 • (800) 444-3353
record product’s serial number here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not avail-
able individually as replacement parts.
SKU 96531
For technical questions, please call 1-800-444-3353.
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
|