Snapshot
OK on Dimmer
Outdoor OK
Sound Activated
DMX512
Master/Slave
Autoswitching
Transformer
Replaceable Fuse
User Serviceable
Duty Cycle
USER MANUAL
3000 N 29th Ct, Hollywood, FL 33020 U.S.A.
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560
Download from Www.Somanuals.com. All Manuals Search And Download.
1. BEFORE YOU BEGIN
What is included
1 x Scorpion™ Storm MG
1 x AC/DC Power Supply
1 x Warranty Card
1 x User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that
all parts are present, and have been received in good condition. Notify the shipper immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box
and packing.
AC Power
This fixture has an auto-switching power supply that can accommodate a wide range of input
voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage
you are applying is within the range of accepted voltages. This fixture will accommodate between
100V and 240V AC 50-60 Hz. All fixtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is
used solely for a 0% to 100% switch.
Contact Us
World Wide
General Information
CHAUVET
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115
fax:
954.929.5560
toll free: 800.762.1084
Technical Support
CHAUVET
3000 North 29th Court
Hollywood, FL 33020
voice: 954.929.1115 (Press 4)
fax:
954.929.5560 (Attention: Service)
World Wide Web
Scorpion™ Storm MG User Manual
3
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Please read these instructions carefully, which includes important
information about the installation, usage and maintenance of this
product.
Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that
they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
This product is intended for indoor use only!
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no
flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent
surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing lamp or fuse and be sure to
replace with same lamp source.
Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use
its carrying handles.
Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at temperatures higher
than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center. Always use the same type spare parts.
Never connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
Lasers can be hazardous and have unique safety considerations. Permanent eye injury and
blindness is possible if lasers are used incorrectly. Pay close attention to each safety REMARK and
WARNING statement in the user manual. Read all instructions carefully BEFORE operating this
device.
Caution!
Caution!
Caution!
Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to
direct laser light.
This laser product can potentially cause instant eye injury or blindness if laser light directly
strikes the eyes.
It is illegal and dangerous to shine this laser into audience areas, where the audience or other
personnel could get direct laser beams or bright reflections into their eyes.
Caution!
Caution!
It is a US Federal offense to shine any laser at aircraft.
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Caution!
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs yourself. In the unlikely event your unit may require service, please contact the dealer
nearest to you.
Scorpion™ Storm MG User Manual
4
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
NON-INTERLOCKED HOUSING WARNING
This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe
levels of laser radiation. The laser power levels accessible, if the unit is opened, can cause instant blindness, skin burns
and fires.
LASER SAFETY AND OPERATING INSTRUCTIONS
Laser Light is different from any other light sources with which you may be familiar. The light from this product can
potentially cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light
from any other kind of light source. This concentration of light can cause instant eye injuries, primarily by burning the
retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still
potentially injure or blind you or your audience. Even very small amounts of laser light are potentially hazardous even at
long distances. Laser eye injuries can happen quicker than you can blink.
It is incorrect to think that because these laser entertainment products split the laser into hundreds of beams that the laser
beam is scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser product uses
dozens of milliwatts of laser power (Class 3B levels internally) before it splits into multiple beams (Class 3R levels). Many
of the individual beams are potentially hazardous to the eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the laser beams
always move. Since eye injuries can occur instantly, it is critical to prevent the possibility of any direct eye exposure. In the
laser safety regulation, it is not legal to aim Class 3R lasers in areas which people can get exposed. This is true even if it
is aimed below people’s faces, such as on a dance floor.
Do not operate the laser without first reading and understanding all safety and technical data in this
manual.
Always set up and install all laser effects so that all laser light is at least 3 meters (9.8 feet) above the floor
on which people can stand. See “Proper Usage” section later in this manual.
After set up, and prior to public use, test laser to ensure proper function. Do not use if any defect is
detected. Do not use if laser emits only one or two laser beams rather than dozens/hundreds, as this could
indicate damage to the diffraction grating optic, and could allow emission of higher laser levels above
Class 3R.
Do not point lasers at people or animals.
Never look into the laser aperture or laser beams.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies,
etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even laser
reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, open, or if the optics appear damaged in any way.
Never open the laser housing. The high laser power levels inside of the protective housing can start fires,
burn skin and will cause instant eye injury.
Never leave this device running unattended.
The operation of a class 3R laser show is only allowed if the show is controlled by a skilled and well-
trained operator, familiar with the data included in this manual.
The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
Always use appropriate lighting safety cables when hanging lights and effects overhead.
Scorpion™ Storm MG User Manual
5
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER EXPOSURE WARNING
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of
Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations,
agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance
can be obtained via the International Laser Display Association: www.laserist.org.
LASER EMISSION DATA
LASER CLASSIFICATION
Green Laser Medium
Red Laser Medium
Beam Diameter
CLASS 3R (EQUIV. TO US CLASS IIIA)
DPSS Nd:YVO4, 532nm
LD GaAlAs 650nm, typical
<5mm at aperture
All pulses < 4Hz (>0.25sec)
Pulse Data
Divergence (each beam)
Divergence (total light)
<2 mrad
<160 degrees
<5MW
Laser Power of Each
Beam from Aperture*
* As measured under IEC measurement conditions for classification.
LASER COMPLIANCE STATEMENT
THIS LASER PRODUCT COMPLIES WITH EN/IEC 60825-1 ED 2, 2007-03, AND US FDA/CDRH FLPPS VIA THE TERMS OF LASER NOTICE NO. 50 DATED JUNE
24, 2007. THIS LASER DEVICE IS CLASSIFIED 3R. (CLASS 3R IS THE INTERNATIONAL EQUIVALENT OF US CLASS IIIA). NO MAINTENANCE IS REQUIRED TO
KEEP THIS PRODUCT IN COMPLIANCE WITH LASER PERFORMANCE STANDARDS.
Scorpion™ Storm MG User Manual
7
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTRODUCTION
Features
Operating modes: automatic, sound activation, master/slave, manual
Creates a unique star field effect with many patterns and hundreds of beams
Pattern and speed knobs for automatic mode
Built-in automatic programs via master/slave
Built-in sound activated programs via master/slave
Safety cover protects laser during transport
Moveable bracket to allow different mounting positions
Complies with FDA / CDRH standards for ClassIIIR
Product Overview
Hanging
bracket
Power LED
Bracket
adjustment
knob (1 of 2)
Audio LED
Scorpion™ Storm MG
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PROPER USAGE
This fixture has been designed to be hung. It is recommended for safety purposes, your
lighting effects are properly mounted using a suitable hanging clamp and safety cable. Items
appropriate for safe and effective mounting are easily sourced from your lighting vendor.
International laser safety regulations require that lasers must be operated in the fashion
illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation between the floor
and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation is
required between laser light and audience or other public spaces.
3 meters
CAUTION: Use of controls, adjustments, or performance of
procedures other than what is specified herein may result in
hazardous radiation exposure
CAUTION: Use of controls, adjustments, or
performance of procedures other than what is
specified herein may result in hazardous radiation
exposure
Scorpion™ Storm MG User Manual
10
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SETUP
Mounting
ORIENTATION
This fixture may be mounted in any safe position, provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the
fixture by loosening both knobs and tilting the fixture. After finding the
desired position, retighten both knobs.
When selecting installation location, take into consideration access and
routine maintenance.
Safety cables must always be used.
Note!
Clamp is sold separately.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation.
Scorpion™ Storm MG User Manual
11
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
4. OPERATING INSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD
Display.
Button
Function
Used to access the menu or to return to a
previous menu option
<MODE>
Scrolls through menu options in ascending
order
<UP>
Scrolls through menu options in descending
order
<DOWN>
<ENTER>
MODE
UP
DOWN ENTER
Used to select and store the current menu
or option within a menu
The Control Panel LED Display shows the menu items you select from the menu map on page #.
When a menu function is selected, the display will show immediately the first available option for the
selected menu function. To select a menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu map and menu options. Press the
<ENTER> button to access the menu function currently displayed or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MODE> button.
Menu Functions
MAIN FUNCTION
SELECTION
DESCRIPTION
Use the <UP> button to change the strobe speed (first digit).
Use the <DOWN> button to change the rotation direction and
speed (second digit).
All programs can further be altered and customized by rotating
the 2 motor knobs below the display.
These will not work in master/slave operation.
Select any of these automatic programs to constantly change
effects, patterns, speeds, etc.
Auto modes
These programs do not have manual adjustment and will not
work with the motor knobs below the display.
These programs will work in master/slave operation.
Use the <UP> button to change the strobe speed and patterns
(first & second digit).
Use the <DOWN> button to change the rotation direction and
speed (third digit).
Additional auto programs (alternating in master/slave
operation)
Laser responds to low frequencies picked up by the internal
microphone.
Sound
Slave
Use the sound knob to adjust the sensitivity of the microphone.
Sets the fixture into slave mode.
Scorpion™ Storm MG User Manual
12
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Troubleshooting
Applies to
Foggers
& Snow
Dimmers
& Chaser
Symptom
Solution(s)
Lights
Controllers
Auto shut off
Check fan thermal switch reset
Breaker/Fuse keeps
blowing
Check total load placed on device
Check users manual for speed adjustment
Chase is too slow
Device has no power Check for power on Mains.
Check device’s fuse. (internal and/or external)
Fixture is on but
there is no
movement to the
audio
Make sure you have the correct audio mode on the
control switches. If audio provided via ¼” jack, make
sure a live audio signal exists
Adjust sound sensitivity knob
Light will not come
on after power failure before the electronics in the fixture can kick start it
again, wait 5 to 10 minutes before powering up
Some discharge lamps require a cooling off period
Loss of signal
Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables
or black lights.
No flash
Re-install bulb, may have shifted in shipping
No laser output
Bounce mirror motor may have shifted during shipping,
readjust
If you still have a problem after trying the above solutions, please contact CHAUVET Technical
Support at the location on the next page.
Scorpion™ Storm MG User Manual
13
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
Address: Service Dept.
3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.)
Support (Email): [email protected]
Telephone: (954) 929-1115 - (Press 4)
Fax: (954) 929-5560 - (Attention: Service)
5. APPENDIX
Returns Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #).
Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to
shipping the fixture. Be prepared to provide the model number, serial number and a brief description
of the cause for the return. Be sure to properly pack fixture, any shipping damage resulting from
inadequate packaging is the customer’s responsibility. CHAUVET reserves the right to use its own
discretion to repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is
always a safe method to use.
Note:
If you are given an RMA #, please include the following information on a piece of
paper inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
Claims
Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and
submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim
for items such as missing component/part, damage not related to shipping, and concealed damage,
must be made within seven (7) days of receiving merchandise.
Scorpion™ Storm MG User Manual
14
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
WEIGHT & DIMENSIONS
Length ................................................................................................................................ 8.6 in (220 mm)
Width.................................................................................................................................. 7.4 in (189 mm)
Height................................................................................................................................. 7.2 in (182 mm)
Weight..................................................................................................................................3.1 lbs (1.4 kg)
POWER
12V DC 2A adapter (included) ...................................................100-240VAC 50/60Hz input (to adapter)
Fuse ...........................................................................................................................1.5A 250V slow-blow
Power Consumption ...........................................................................................11W (0.1A) max @ 120V
Inrush Power.......................................................................................................................... 0.2A @ 120V
Power Output............................................................................................................75 units max @ 120V
LASER
Green diode ......................................................................................................................... 532 nm 30mW
Laser Type.........................................................................................................................................DPSS
Cooling......................................................................................................................................Fan Cooled
RANGE
Coverage Angle....................................................................................................................................100°
THERMAL
Maximum ambient temperature .............................................................................................104°F (40°C)
MASTER/SLAVE LINKING
Cable type......................................................................................male-to-male 1/8” (3.5mm) TRS cable
ORDERING INFORMATION
Scorpion™ Storm MG .......................................................................................... SCORPIONSTORMMG
WARRANTY INFORMATION
Warranty..................................................................................................................1-year limited warranty
Scorpion™ Storm MG User Manual
15
4/27/2009 5:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|