In st ruct ion
Man ual
Para in st ruccion es en Esp añ ol,
llam ar al: 1-800-837-4044
w w w.cen t uryp rod uct s.com
Avoid in jury or d eat h -
Read an d un d erst an d t h is m an ual!
PM-1707AB
6/ 01
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
No car seat can guarantee protection from
injury in every situation, but proper use helps
reduce the risk of serious injury or death.
Safet y First Ch eck List
❃
❃ Read and understand instruction manual and
car seat labels.
❃ A vehicle combination lap/shoulder belt MUST
be used when using car seat without harness
system.
Reg ist rat ion In form at ion
❃
Child restraints (car seats) could be recalled for
safety reasons. You must register this restraint
to be reached in a recall. Fill out the
registration card attached to car seat and mail
today or send your name, address, and the
restraint’s model number and manufacturing
date to:
❃ Do not use vehicle “lap-only” belt across front
of child.
❃ Secure children in back seat whenever possible.
❃ Never leave child unattended.
❃ Install car seat securely.
Century Products
P.O. Box 551
Elverson, PA 19520-9973
❃ Do not use after date shown on back of
car seat.
or call 1-888-224-6549
For recall information:
❃ Do not allow anyone (babysitter, relatives, etc.)
to use car seat without first understanding all
instructions.
• Call the U.S Government’s Auto Safety
Hotline at 1-800-424-9393
(202-366-0123 in D.C. area)
• Call Century Products at 1-800-837-4044
1
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS - Prevent serious injury or death:
Never p ut a car seat in a fron t
Failure t o follow t h ese in st ruct ion s
an d car seat lab els can result in ch ild
st rikin g t h e veh icle’s in t erior d urin g
a sud d en st op or accid en t . Secure
ch ild rest rain t w it h a veh icle seat
b elt as sh ow n in t h is m an ual.
veh icle seat un less recom m en d ed b y
veh icle ow n er’s m an ual. Nat ion al
Hig h w ay Traffic Safet y
Ad m in ist rat ion (NHTSA) alert s
veh icle ow n ers t h at accord in g t o
accid en t st at ist ics, ch ild ren up t o
ag e 12 are safer in t h e b ack seat .
For veh icle’s w it h air b ag s, refer t o
veh icle ow n er’s m an ual for ch ild
rest rain t in st allat ion in form at ion .
Not all veh icle seat b elt s can b e used
w it h car seat . Read “Veh icle Seat
Belt s” sect ion :
•
Car seat w it h h arn ess syst em
MUST b e h eld securely at all
t im es b y a lap b elt (or lap b elt
p ort ion of a lap / sh ould er b elt )
t h at w ill n ot ch an g e len g t h
w h ile d rivin g .
If car seat is in a crash , it m ust b e
rep laced . DO NOT use it a ga in! A
crash can cause un seen d am ag e an d
usin g it ag ain could cause serious
in jury or d eat h .
•
Car seat w it h out h arn ess
syst em MUST b e used w it h a
lap / sh ould er b elt .
2
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS - Prevent serious injury or dea th (con t in ued ):
DO NOT use car seat if it is d am ag ed
or h as m issin g p art s.
DO NOT use accessories or p art s
ot h er t h an t h ose p rovid ed b y
Cen t ury or Graco. Th eir use could
alt er t h e fun ct ion of t h e car seat an d
cause serious in jury or d eat h .
Never leave ch ild un at t en d ed , even
w h en sleep in g .
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC INFORMATION
Cert ificat ion
❃
Un occup ied Car Seat
❃
Always secure car seat with a vehicle seat belt,
even when unoccupied. An unsecured car seat
can injure passengers.
With Harness System:
Car seat meets or exceeds all applicable
requirements of Federal Motor Vehicle Safety
Standards for use in motor vehicles and aircraft.
Without Harness System:
Booster seat is certified for use in motor vehicles.
Booster seat is NOT certified for use in aircraft.
Car Seat Useful Life
❃
Warm Weat h er
❃
DO NOT use after date shown on back of
car seat due to changing requirements and
normal wear and tear.
Car seat parts can get very hot in the sun or
warm weather.
To avoid burns, always check before putting
child in car seat.
DO NOT USE
Look for:
THIS CAR SEAT
AFTER DECEMBER
YEAR
Dan g erous Veh icle Seat s
❃
Veh icle Seat Prot ect ion
❃
Protect vehicle seat. Use a car seat mat, towel
or thin blanket under and behind car seat.
Do not use car seat on rear-facing or
side-facing vehicle seats.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HEIGHT an d W EIGHT LIMITS
Wit h Harn ess Syst em
❃
Child MUST meet all of the following
requirements:
❃
Out g row in g Car Seat
• Weight is 20 - 40 lbs. (9.1 - 18.1 kg).
WARNING
• Height is 27 - 43 inches (68.6 - 109.2 cm)
tall.
To avoid in juries from w h ip lash , t op of
ch ild ’s ears m ust b e b elow t op ed g e of
h ead rest .
• Child is able to sit upright unassisted
.
*
• Child’s shoulders are not above top harness
slots.
With
Harness System
80 lb s.
(36.3 kg )
20 lb s.
30 lb s.
40 lb s.
(18.1 kg )
(9.1 kg ) (13.6 kg )
Without Harness System
Wit h out Harn ess Syst em
❃
Child MUST meet all of the following
requirements:
• Weight is 30 - 80 lbs. (13.6 - 36.3 kg).
• Height is 35 - 52 inches (89 - 132.1 cm) tall.
• Child is able to sit upright unassisted
.
*
• Top of child’s ears are not above top of
headrest.
The American Academy of Pediatrics recommends
that children should be at least one year of age
*
before being positioned forward facing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION - with harness system
1
Adjust car seat to semi-upright position and
armrests to up position.
2
3
Place forward-facing on vehicle seat.
Lift seat pad flap, thread vehicle seat belt
through openings and buckle belt (fig. a).
Press down firmly in center of car seat to
compress vehicle seat cushion while tightening
vehicle seat belt.
4
HINT: Use your knee to press down in center
of car seat (fig. b).
Pull front to back and left to right to check for
secure installation (fig. c).
5
6
If not secure, see “Vehicle Seat Belts” section.
Attach tether hook (A) to anchor hardware (B)
and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available,
see “Installation of Anchor Hardware“ section.
Pull to
tighten
Openings
(A)
(B)
(fig. d)
6
(fig. a)
(fig. b)
(fig. c)
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION - without harness system
1
Adjust car seat to upright or semi-upright
position and armrests to up or down position
.
Place forward-facing on vehicle seating position
with a vehicle lap/shoulder belt.
2
3
Tether may be used to help stabilize booster seat:
Attach tether hook (A) to anchor hardware
(B) and tighten strap to remove any slack
(fig. a).
If tether anchor hardware (B) is not available,
see “Installation of Anchor Hardware“ section.
If not using tether, see “Tether Storage” section.
Pull to
tighten
(A)
(B)
(fig. a)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACING CHILD IN CAR SEAT - with harness system
Adjust harness system:
WARNING
Harness straps must be through slots at or
just above shoulders.
To p reven t serious in jury or d eat h :
1
2
• Veh icle seat b elt m ust b e rout ed
t h roug h b ack of car seat w h en usin g
h arn ess syst em .
Place child in car seat with child’s back flat
against back of car seat.
• Never p lace veh icle b elt in fron t of
ch ild w h en usin g h arn ess syst em .
Place harness straps over child’s shoulders and
lock tongues into buckle.
• Do n ot use st rap covers, b lan ket s,
cush ion s, or p ad d in g un d er h arn ess
st rap s or ch ild un less p rovid ed b y
Cen t ury or Graco.
Pull up on tongues to be sure buckle is locked.
3
4
Close harness tie:
• Do n ot use h arn ess st rap s t h at are
loose or un b uckled . Th ey m ust b e
sn ug an d p osit ion ed over sh ould ers
an d t h ig h s.
Position harness tie at arm pit level.
Tighten harness straps so that they are snug
with just enough room to insert one finger
between child’s chest and harness straps (fig. a).
Thigh straps must also be snug (fig. b).
5
Position Head Support in center of car seat
with ends pointing down and snap into belt
slots above harness straps (fig. c).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACING CHILD IN CAR SEAT - with harness system (cont inued)
3
2
(fig. a)
(fig. b)
(fig. c)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACING CHILD IN CAR SEAT - without harness system
Remove harness system (see “Harness System -
removal and re-assembly” section).
WARNING
1
Place child in car seat with child’s back flat
against back of car seat.
To p reven t serious in jury or d eat h :
• Sh ould er b elt MUST b e p rop erly
p osit ion ed over sh ould er (NOT
t ouch in g ch ild ’s n eck an d NOT low
off sh ould er).
2
3
Place shoulder belt across child’s chest.
Buckle belt and pull shoulder belt to adjust lap
belt snugly.
• Lap / sh ould er b elt MUST b e p rop erly
p osit ion ed exact ly as sh ow n in
illust rat ion .
Shoulder belt MUST lay across child’s shoulder
in red zone as shown (fig. b). If outside of
red zone, see next steps for Comfort Clip use.
• DO NOT use sh ould er b elt loose or
p osit ion ed un d er ch ild ’s arm s (fig. a).
CAUTION:
• Never use a veh icle “lap -on ly” b elt
across fron t of ch ild .
Some shoulder belts with (emergency
locking) retractors allow a child to pull belt
out and change position of belt. Use of
Comfort Clip helps prevent child from pulling
belt out.
• DO NOT allow ch ild t o slid e d ow n in
car seat w h ich could p osit ion lap b elt
across ch ild ’s ab d om en an d sh ould er
b elt over n eck or face.
4
5
Thread shoulder belt through Comfort Clip
exactly as shown and hook end of Comfort Clip
through proper loop of webbing (fig. c).
• If ch ild w ill n ot keep veh icle sh ould er
b elt p rop erly p osit ion ed , DO NOT use
t h is b oost er car seat . Use a d ifferen t
ch ild rest rain t syst em .
Check to be sure shoulder belt is properly
positioned over shoulder in red zone and snug
against child.
• Veh icle b elt s MUST lay flat ag ain st ch ild
an d MUST n ot b e t w ist ed .
6
Position Head Support in center of car seat
with ends pointing down and snap into belt
slots (fig. d).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PLACING CHILD IN CAR SEAT - without harness system (continued)
Loops
(fig. b)
(fig. c)
(fig. a)
(fig. d)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS an d ADJUSTMENTS
1
4
Harness Straps (fig. a):
Recline (fig. c):
• To tighten: Pull lower belt tab.
• Recline: Slide tab on front of car seat to
allow recline foot to drop down.
• To loosen: Pull upper belt tab while
pulling harness straps.
• Upright: Slide and hold tab on front of
car seat while pushing recline foot up.
Release tab to lock foot.
2
Harness Tie:
• To open: Press tab and pull apart (fig. b).
5
6
Armrests (fig. d):
• To close: Snap halves together. Make
sure harness tie is locked by pulling out
on each half.
• Push in button on front side of car seat
and rotate armrest up or down.
3
Tether Straps (fig. e):
Buckle:
• To tighten: Pull loose end of strap.
• To lock: Insert both tongues into buckle.
Pull up on tongues to be sure they are
locked.
• To loosen: Lift adjuster
• To unlock: Press red button and pull
tongues out of buckle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS an d ADJUSTMENTS (cont inued)
Loosen
Upper Belt
Tighten
Lower Belt
Adjuster
(fig. e)
(fig. a)
(fig. d)
(fig. b)
(fig. c)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS an d ADJUSTMENTS (cont inued)
7
Changing Harness Strap Slots:
MUST use slots at or just above shoulders.
A Loosen harness straps.
B Remove both harness strap loops from
Splitter Plate on back of car seat (fig. f).
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
D Put right strap loop on Splitter Plate first,
then attach left strap loop. (fig. f).
NOTE: Make sure straps are NOT twisted.
Splitter Plate
(fig. f)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS an d ADJUSTMENTS (cont inued)
8
Changing Crotch Strap Slots:
MUST be in slot closest to but not under child.
A Turn car seat upside down, pry metal rod
loose using screwdriver and pull
rod out of crotch strap end (fig. g).
B Turn car seat upright and pull crotch strap
and buckle out.
C Change crotch strap slots.
Thread looped end of crotch strap through
slots in seat pad and shell (fig. h).
D Slide metal rod through loop in crotch
strap and press rod into car seat shell
(fig. i).
NOTE: Use a hammer to tap rod if
necessary.
(fig. g)
(fig. h)
(fig. i)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HARNESS SYSTEM - removal and re-assembly
Re-assembly:
Removal:
When re-assembling harness system, be sure
harness straps are not twisted.
Harness with Breast Plates:
• Remove harness strap loops from Splitter
Plates on back and bottom of car seat.
1
Harness with Breast Plates:
Thread Splitter Plate and looped end of harness
straps down through slots in seat pad and
car seat then connect harness strap loop to
bottom Splitter Plate.
• Pull harness strap out of car seat.
NOTE: It is not necessary to remove
harness tie and tongues from harness
straps.
Harness without Breast Plates:
Store all parts for future use.
Thread end of harness strap down through slot
in seat pad and car seat and back up through
slot in opposite side of car seat pad, through
harness tongues and harness tie.
• Remove buckle (see page 15).
Harness without Breast Plates:
2
IMPORTANT: Harness strap MUST be threaded
over adjustment strap on bottom of car seat as
shown in illustrations.
• Remove harness strap loops from Splitter
Plate on back of car seat.
• Pull harness strap out of car seat, harness
tie, and tongues.
3
4
Thread ends of harness straps through matching
shoulder slots in back of seat pad and car seat.
Store all parts for future use.
Re-attach harness straps to Splitter Plate on back:
Put right strap loop on Splitter Plate first, then
attach left strap loop.
• Remove buckle (see page 15).
5
Re-attach buckle (see page 15).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HARNESS SYSTEM - removal and re-assembly (cont inued)
(Harness with
Breast Plates)
(Harness without
Breast Plates)
2
2
1
4
Splitter Plate
(Bottom)
3
Splitter Plate
(Back)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS
If car seat is not held securely after following
instructions in this manual, vehicle seat belt
labels, and vehicle owner’s manual:
WARNING
Not all veh icle seat b elt s can b e used
w it h a car seat :
• Move car seat to another seating location
and try again, or
• Car seat w it h h arn ess syst em MUST
b e h eld securely at all t im es b y a
lap b elt (or lap b elt p ort ion of a
lap / sh ould er b elt ) t h at w ill n ot
ch an g e len g t h w h ile d rivin g .
• Contact vehicle dealer for possible seat
belt modification parts.
• Car seat w it h out h arn ess syst em
MUST b e used w it h a lap / sh ould er
b elt .
To provide the most secure installation of the
car seat:
• Read the vehicle owner’s manual regarding
car seat installation and seat belt use with
car seat.
• Follow all instruction labels on vehicle seat
belt and car seat.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Lap Belt s - Man ually Ad just ab le
❃
With Harness System:
The locking latch plate on some seat belts may
slip and loosen after being buckled on car seat if
positioned at a certain angle. If this happens,
flip latch plate over (fig. a) and re-buckle. Test
installation again to see if this works. If not,
move car seat to another seating position.
Flip
Without Harness System:
DO NOT use this type of vehicle seat belt to
secure child and booster car seat.
(fig. a)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Lap Belt s - Wit h Ret ract or
❃
With Harness System:
Lap belts with retractors may or may not hold
a car seat securely.
Follow these steps to determine if you have a
retractor system that will hold car seat securely:
a. Pull belt all the way out.
b. Allow belt to retract about 6 inches (15 cm).
c. Pull out on belt again.
If belt is locked and you cannot pull the belt out
any further, you have an Automatic Locking
Retractor which may be used with a car seat.
Remember, when installing a car seat, pull belt
Retractor
all the way out, buckle belt, and then tighten.
If you can pull the belt out again (step c), you
have an Emergency Locking Retractor which
must not be used with a car seat.
Without Harness System:
DO NOT use this type of vehicle seat belt to
secure child and booster car seat.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Passive Rest rain t - Lap Belt
❃
w it h Mot orized Sh ould er Belt
With or Without Harness System:
DO NOT use with any car seat.
Passive Rest raint Lap or
-
❃
Shoulder Belt Mount ed on Door
With or Without Harness System:
DO NOT use with any car seat. Belts will not
stay tight while driving.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Belt s Forw ard of Seat Crease
❃
Seat Crease
With Harness System:
Vehicle seat belts located forward of seat
crease may not securely hold car seat. Check
vehicle owner’s manual or see vehicle dealer for
car seat installation requirements.
If approved for use with car seat by vehicle
manufacturer, install car seat and check for
secure installation by pulling car seat front to
back. If car seat slides forward, DO NOT use
these seat belts.
Without Harness System:
OK to use. Follow vehicle owner’s manual
for specific instructions on how to use
vehicle seat belts.
DO NOT use lap only belts.
Seat Crease
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Com b in at ion Lap / Sh ould er Belt
❃
w it h Lockin g Lat ch Plat e
Flip
With Harness System:
OK to use. Follow vehicle owner’s manual for
specific instructions on how to use vehicle seat
belts.
(fig. b)
The locking latch plate on some seat belts may
slip and loosen after being buckled on car seat if
positioned at a certain angle. If this happens,
flip the latch plate over (fig. b) and re-buckle.
Test installation again to see if this works. If
not, move car seat to another seating position.
Without Harness System:
OK to use. Follow vehicle owner’s manual for
specific instructions on how to use vehicle seat
belts.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
Com b in at ion Lap / Sh ould er Belt
❃
w it h Slid in g Lat ch Plat e
With Harness System:
Pull
Pull on latch plate (fig. a). If belt slides freely
through latch plate, a locking clip MUST be
used. (See “Locking Clip”section.)
(fig. a)
Without Harness System:
This vehicle seat belt system is OK to use with
booster car seat.
Movement of the seat belt through the latch
plate can allow an active toddler to slide down
in car seat and re-position lap belt over
abdomen and shoulder belt over neck or face
which is dangerous.
A Locking Clip may be used on this type of
vehicle seat belt to prevent movement of seat
belt through latch plate limiting toddler’s
movement:
3
4
1
2
Install car seat and adjust lap/shoulder belt
snugly around child.
Slide locking clip on seat belts approximately
1/2 inch (1 cm) away from latch plate (see
illustration page 25).
Hold seat belts together at latch plate
(fig. a - page 25) then unbuckle.
Re-buckle seat belt.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE SEAT BELTS (cont inued)
5
Test installation to see if car seat is secure.
Lockin g Clip
❃
If not secure, additional belt tightening may be
required:
• Unbuckle vehicle seat belt.
WARNING
• Hold belts together and remove locking
clip.
Avoid serious in jury or d eat h :
• Failure t o use lockin g clip w h ere
req uired w ill result in car seat n ot
b ein g securely h eld in p lace.
• Shorten length of lap belt portion slightly
by pulling belt through latch plate.
• Re-attach locking clip.
• Buckle vehicle seat belt.
• Rem ove lockin g clip from seat b elt s
w h en n ot b ein g used w it h car seat .
HINT: Press car seat further down into vehicle
seat cushion to help buckle vehicle seat belt.
• DO NOT use lockin g clip as a veh icle
seat b elt sh ort en er.
Test installation to see if car seat is secure. If
not secure, repeat above steps until secure.
You MUST use locking clip provided with
car seat with a vehicle seat belt that slides
freely through the latch plate or the lap belt
cannot be tightly secured.
1
Install car seat and tighten vehicle seat belt.
2
Hold seat belts together at latch plate (fig. a)
then unbuckle.
1/2 inch (1 cm)
(fig. a)
3
Slide locking clip on seat belts approximately
1/2 inch (1 cm) away from latch plate.
4
Re-buckle seat belt.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION
Inst allat ion of Anchor Hardware
❃
WARNING
• Be sure an ch or h ole is p rop erly sealed
t o p reven t exh aust fum es an d w at er
from en t erin g t h e veh icle.
Avoid serious in jury or d eat h :
Vehicle may already be equipped with a tether
anchor (top strap anchor). See vehicle owner’s
manual for location.
If vehicle does not have a tether anchor, one must
be installed:
• If you w ish t o rem ove an ch or on ce ch ild
out g row s car seat , m ake sure h ole is
p rop erly p lug g ed or sealed t o p reven t
exh aust fum es from en t erin g t h e
veh icle.
• Contact vehicle dealership for proper
anchor location and installation.
• Before installing anchor, install car seat on a
vehicle seat and check that the lap belt
portion of the vehicle belt will hold car seat
securely.
If tether anchor hardware kit is not available at
your vehicle dealership, one may be purchased at
a local retailer or call Century at 1-800-837-4044.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION (cont inued)
Tet her St orage
❃
Tether strap may be used with car seats when used
as a belt positioning booster (without harness) to
help keep the upper portion of the car seat
stabilized.
Read and follow instruction manual for use of car
seat as a belt positioning booster.
For storage of tether hook if not used with a belt
position booster:
•
Adjust tether strap length so hook end is as
short as possible.
•
•
Roll up loose end of strap.
Place rolled up strap on top of adjuster and
place rubber band around bundle.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION (cont inued)
Care & Clean in g
❃
Removing Seat Pads:
3
If using harness system, remove harness system
(see Harness System - removing and
re-assembly” section).
4
1
Slide “J” hooks out of front slots.
1
2
Unhook elastic from “J” hooks.
3
Pull two button clips out (located on inside of
seat pad) and pull pad off.
2
2
Removing Armrest Pads and Top Head Pad
(available on some models):
5
5
4
Pull headrest attachment strips apart and pull
pads off.
4
5
Pull armrest attachment strips apart and pull
pads off.
Reverse above steps for replacing pads and
harness system.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL INFORMATION (cont inued)
Seat Pad and Armrest Pads:
Aircraft Use
❃
Machine-wash separately on gentle cycle and
drip dry.
With Harness System:
Harness Straps:
This car seat is certified for use on aircraft when
used with harness system (see label on
car seat). Contact airline about their policy.
Surface wash only with mild soap and damp
cloth.
If harness straps are frayed or heavily soiled,
they MUST be replaced.
Use this car seat only on forward-facing aircraft
seats.
Shell:
Install car seat on an aircraft the same way it is
installed in a vehicle except DO NOT use tether
strap.
Wipe with mild solution of soap and water.
Avoid wetting labels.
Never use household detergents, they can
weaken plastic.
Without Harness System:
When used without harness system as a belt
positioning booster seat, this restraint is not
certified for use in aircraft because there is
no shoulder belt available.
Buckle:
Rinse buckle with warm water. DO NOT use
household detergents. Never lubricate
buckle.
WARNING
Preven t serious in jury or d eat h :
Secon d Han d Car Seat
❃
• Buckle m ust b e p rop erly lat ch ed .
Century advises against loaning or passing
along car seat.
• Period ically in sp ect an d clean b uckle
t o rem ove ob ject s or d eb ris t h at could
p reven t lat ch in g .
29
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Fold in st ruct ion m an ual.
If a part is damaged,
missing, or you need help
or replacement parts,
DO NOT return car seat
to the store.
CALL US FIRST
Call toll-free 1-800-837-4044
from anywhere in the U.S. or Canada
or fax at 1-610-286-4555.
2
St ore in p ocket .
or w rit e us at :
Century Products
P.O. Box 100
Elverson, PA 19520-9974
Attention: Customer Service
Department
Pocket
Century Products
Graco Children’s Products Inc.
A Division of Newell Rubbermaid
Macedonia, Ohio 44056-2096
Download from Www.Somanuals.com. All Manuals Search And Download.
|