ELECTRIC COUNTER TOP
CONVEYOR TOASTER
OPERATION MANUAL
CT-250
CT-500
CT-750
CT-500 Shown
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295
■
718-932-1414
FAX 718-932-7860
NN54A 5/05
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on the purchase of your Cecilware Conveyor Toaster. Please take time to carefully read
through this manual to ensure the machine is operated and maintained properly. This will enable the best
possible performance from this product for many years.
Cecilware will not accept liability for the following if:
*The instructions in this manual have not been followed correctly.
*Non-authorized personnel have tampered with the machine.
*Non-original spare parts are used.
*The machine has not been handled and cleaned correctly.
Packaging
Cecilware prides itself on quality and service, ensuring that at the time of packing all products is supplied
fully functioning and free of damage.
Provided in this package are the following:
* Conveyor Toaster
* Crumb Tray
* Feeder Rack
* Return Chute
* Pass through Chute
* Feet (4)
* Manual
Should you find any damage that has occurred in transit, please contact your Cecilware dealer
immediately?
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Remove the Cecilware Conveyor Toaster from the packaging. Be certain that all protective plastics and
residues are thoroughly cleaned from its surface.
Place the Cecilware Conveyor Toaster on a firm level surface.
Local standards and regulations should be consulted in order to abide by standards set in relation to
positioning, spacing, and ventilation.
Caution:
Do not position and operate near combustible materials/flammable objects. Once the Conveyor Toaster
has been placed in position, ensure the front and back stainless steel trays are positioned correctly.
Supply the appropriate power and connect to source. The Conveyor Toaster is now ready to turn on and
operate. (For power supply, please see technical specification sheet, page 10).
Your Conveyor Toaster can operate as a pass through operation or return operation. Please see diagrams
below and follow the instruction for the appropriate/required method.
Front Crumb
Tray
Close
Back Toaster
Drawer
If open the back crumb tray the food can be out from the
back toaster drawer. If close the back crumb tray the food
will be out from the front crumb tray
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
The Cecilware Conveyor Toaster has upper and lower elements which can be used together or
alternatively; the top element can be used on its own. This can provide flexibility when toasting and
grilling.
The Toaster has 3 functions which are controlled by the function dial on the left of the unit. See below for
the listed functions
Settings:
Off:
Power Off
Full Toast: Provide Full power to both Upper and Lower elements
Top Toast: Provide full power to the upper element only
Standby: Energy Saver – reduce power to unit to save power whilst not in use, whilst keep
the unit warmer for fast heat when required.
Please see diagram below.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Additionally you are able to control the speed of the conveyor rotations which in turn determine the
darkness/lightness of you toasted products.
Adjusting the speed control in a clockwise direction will increase the speed in turn
resulting in lighter toasted products.
Adjusting the speed control in a anti-clockwise direction will slow the conveyor speed in
turn resulting in darker toasted products
Please see diagram above.
Important Notice: If the malfunction lights activates, the unit is malfunctioning. Turn off or
disconnect the unit from the power supply and refer to a qualified service technician.
*Caution: When in operation, the Conveyor Toaster will be hot; at the entrance to the conveyor cavity.
Please take extreme caution.
Cleaning, Care and Maintenance
Switch off the power and disconnect from the power source.
The Conveyor Toaster should be cleaned after each day’s operation; however, the unit may require more
frequent cleaning, depending on the volume of production.
Allow the Conveyor Toaster to cool before cleaning. Remove the return chutes, feeder and crumb trays
and wipe clean with a damp cloth; be sure to dry before returning them to the unit. For details cleaning
these non electrical parts can be submerged and wash thoroughly if needed.
The remainder of the Conveyor Toaster can be cleaned with a damp cloth using hot, soapy water.
Do not immerse completely in water or use hose to clean.
Warm soapy water is recommended for cleaning; prolonged use of cleaning agents may cause damage to
stainless steel.
Safety
Cecilware Qualified Service Technician should carry out repairs if necessary. Do not remove any
components or service panels on this product.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must be
replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.
Allow the Conveyor Toaster to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.
Trouble Shooting
If your Cecilware Conveyor Toaster does not operate, please check the following before placing a service
call.
Conveyor Toaster
Problem
CT-250, CT-500, CT-750
Cause
Remedy
1. Mains power supply
1. Check mains power supply.
2. Check that the unit is correctly
plugged in and turned on; ensure you
have read the manual for both for the
operations functions.
2. Unit is not switched on
The unit does not work; the
indicator light is not on.
3. Dial Control or Timer
are faulty
3. Call service agent or qualified
technician.
4. Plug and lead are 4. Call service agent or qualified
damaged
technician.
5. Call service agent or qualified
technician.
5. Internal wiring fault
The unit is heating but the 1. The indicator light is 1. Call service agent or qualified
indicator lights are not on.
faulty
technician.
1. Ensure that you have clearly read the
manual, to understand the operating
functions.
1. Incorrect operation
2. Warm Up
Slow heat up or no heat up,
power is on.
2. Allow 5 minutes warm up period.
3. Call service agent or qualified
technician.
3. Elements are faulty
4. Power dial is faulty
4. Call service agent or qualified
technician.
1. Turn the unit on and adjust function
1. The unit is not on or control to required setting.
the function control is not 2. Call service agent or qualified
activated.
technician.
Conveyor is not rotating
2. Speed Control Fault
3. Motor Fault
3. Call service agent or qualified
technician.
4. Gear/Chain Fault
4. Call service agent or qualified
technician.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Please ensure:
* There is correct power supply.
* The machine is plugged in correctly and power is switched on.
* The timer and thermostat are in the correct position.
* The elements are clear of any food waste.
Note: All Cecilware products are tested prior to packing.
Compliance
Cecilware products have undergone strict product testing in order to comply with regulatory standards
and specifications set by international, independent, and federal authorities.
As testimony to such compliance, Cecilware products carry the following marks/symbols:
Electrical Diagram
Model： CT-250, CT-500, CT-750
The above circuit diagram has been provided to assist qualified technicians. A Recommended Qualified
Service Technician should carry out repairs if needed. Do not remove any components or service panels
on this product.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Explosion View
Model: CT-250, CT-500, CT-750
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare Parts List
Model: CT-250, CT-500, CT-750
CT-250
Part NO.
CT-500
Part NO.
CT-750
Part NO.
No.
Description
Return Chute
Feet
QTY
1
QTY
1
4
1
1
1
1
2
4
4
2
1
4
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
2
1
1
1
1
QTY
1
4
1
1
1
1
2
4
4
2
1
4
1
1
5
1
1
1
1
1
1
2
1
1
2
1
1
1
2
1
1
1
1
1
NA
NA
NA
2
4
08131
08132
NA
08131
08133
NA
08131
08133
NA
3
Fan Cover
1
4
Base Plate
1
5
Fan
1
08134
08136
08138
08139
08140
08112
08128
08141
08142
NA
08135
08137
08138
08139
08140
08112
08128
08141
08143
NA
08135
08137
08138
08139
08140
08112
08128
08141
08144
NA
6
Motor
1
7
Nosing
2
8
Shaft Bracket
Shaft Cover
4
9
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Wheel
2
Chain
1
Element Fixing Plate
Conveyor Belt
Outer Body
4
1
1
Pass Through Chute
Back Door Chute
Plug & Lead
1
NA
NA
NA
1
NA
NA
NA
1
08055
NA
08047
NA
08047
NA
Inner Top Panel
Inner Insulation Baffle
Top Cover
1
1
NA
NA
NA
1
NA
NA
NA
Element Cover
Element Assembly Plate
Upper Element
Lower Element
Conveyor Drive Shaft
Multi Function Control Switch
Green Indicator Light
Red Indicator Light
Dial
1
08145
08154
08118
08119
08148
08151
08152
08032
08109
08155
08157
08158
08161
NA
08146
08154
08120
08121
08149
08151
08153
08067
08109
08156
08157
08159
08161
NA
08147
08154
08122
08123
08150
08151
08153
08067
08109
08156
08157
08160
08161
NA
2
1
1
2
1
1
1
2
Variable Speed Controller
Thermal Cut Out
Feeder
1
1
1
Bushing
1
1/L
1/R
1
34
Conveyor Support Runner
2
2
NA
NA
NA
35
*
Crumb tray
Resistance
08106
NA
1
1
08107
NA
1
1
08108
NA
1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
POWER
(Watts)
DIMENSIONS (INCHES)
L X W X H
MODEL
Volt(V)
Amps(A)
CT-250
CT-500
CT-750
120
1500
12.5
16.5 x 11.4 x 16.1
16.5 x 14.5 x 16.1
16.5 x 18.5 x 16.1
208/240
208/240
2000/2600
2400/3200
9.6/10.8
11.5/13.3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295
■
718-932-1414
FAX 718-932-7860
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|