ES
USER’S GUIDE
GUÍA DEL USUARIO
LK200ES1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Congratulations on your selection of the CASIO
electronic musical instrument.
Symbol Examples
• Before using the instrument, be sure to carefully
read through the instructions contained in this
manual.
• Be sure to keep all user documentation handy for
future reference.
This triangle symbol ( ) means that the
user should be careful. (The example at
left indicates electrical shock caution.)
This circle with a line through it (
)
means that the indicated action must not
be performed. Indications within or
nearby this symbol are specifically
prohibited. (The example at left indicates
that disassembly is prohibited.)
Symbols
Various symbols are used in this user’s guide and on
the product itself to ensure that the product is used
safely and correctly, and to prevent injury to the user
and other persons as well as damage to property.
Those symbols along with their meanings are shown
below.
The black dot ( ) means that the
indicated action must be performed.
Indications within this symbol are actions
that are specifically instructed to be
performed. (The example at left indicates
that the power plug must be unplugged
from the electrical socket.)
DANGER
This symbol indicates information that, if ignored
or applied incorrectly, creates the danger of death
or serious personal injury.
WARNING
This indication stipulates matters that have the risk
of causing death or serious injury if the product is
operated incorrectly while ignoring this indication.
CAUTION
This indication stipulates matters that have the risk
of causing injury as well as matters for which there
is the likelihood of occurrence of physical damage
only if the product is operated incorrectly while
ignoring this indication.
663A-E-003A
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
G Never touch the AC adaptor while your
hands are wet.
Doing so creates the risk of electric shock.
G Use the AC adaptor where it will not be
splashed with water. Water creates the
risk of fire and electric shock.
G Do not place a vase or any other container
filled with liquid on top of the AC
adaptor. Water creates the risk of fire
and electric shock.
DANGER
Alkaline Batteries
Perform the following steps immediately if
fluid leaking from alkaline batteries ever
gets into your eyes.
1. Do not rub your eyes! Rinse them with
water.
2. Contact your physician immediately.
Leaving alkaline battery fluid in your eyes
can lead to loss of sight.
Batteries
Misuse of batteries can cause them to leak,
resulting in damage to nearby objects, or to
explode, creating the risk of fire and
personal injury. Always make sure you
observe the following precautions.
• Never try to take batteries apart or allow
them to become shorted.
• Never expose batteries to heat or dispose
of them by incineration.
• Never mix old batteries with new ones.
• Never mix batteries of different types.
• Do not charge the batteries.
WARNING
Smoke, Strange Odor, Overheating
Continued use of the product while it is
emitting smoke, a strange odor, or heat
creates the risk of fire and electric shock.
Take the following steps immediately.
1. Turn off power.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
• Make sure the positive (+) and negative
(–) ends of the batteries are facing
correctly.
AC Adaptor
Do not incinerate the product.
G Misuse of the AC adaptor creates the
risk of fire and electric shock. Always
make sure you observe the following
precautions.
Never throw the product into fire.
Doing so can cause it to explode, creating
the risk of fire and personal injury.
• Be sure to use only the AC adaptor
that is specified for this product.
• Use only a power source whose
voltage is within the rating marked on
the AC adaptor.
• Do not overload electrical outlets and
extension cords.
G Misuse of the AC adaptor’s electric cord
can damage or break it, creating the risk
of fire and electric shock. Always make
sure you observe the following
precautions.
Water and Foreign Matter
Water, other liquids, and foreign matter
(such as pieces of metal) getting into the
product create the risk of fire and electric
shock. Take the following steps
immediately.
1. Turn off power.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
• Never place heavy objects on the cord
or subject it to heat.
• Never try to modify the cord or subject
it to excessive bending.
• Never twist or stretch the cord.
• Should the electric cord or plug
become damaged, contact your
original retailer or authorized CASIO
Service Provider.
Disassembly and Modification
Never try to take this product apart or
modify it in any way. Doing so creates the
risk of electric shock, burn injury, or other
personal injury. Leave all internal
inspection, adjustment, and maintenance up
to your original retailer or authorized
CASIO Service Provider.
E-2
663A-E-004A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Dropping and Impact
CAUTION
Continued use of this product after it has
been damaged by dropping or subjecting it
to strong impact creates the risk of fire and
electric shock. Take the following steps
immediately.
AC Adaptor
G Misuse of the AC adaptor creates the
risk of fire and electric shock. Always
make sure you observe the following
precautions.
• Do not locate the electric cord near a
stove or other sources of heat.
• Never pull on the cord when
unplugging from the electrical outlet.
Always grasp the AC adaptor when
unplugging.
G Misuse of the AC adaptor creates the
risk of fire and electric shock. Always
make sure you observe the following
precautions.
1. Turn off power.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
Plastic Bags
Never place the plastic bag the product
comes in over your head or in your mouth.
Doing so creates the risk of suffocation.
Particular care concerning this precaution
is required where small children are
present.
• Insert the AC adaptor into the wall
outlet as far as it will go.
• Unplug the AC adaptor from the wall
outlet during lightening storms or
before leaving on a trip or other long-
term absence.
• At least once a year, unplug the AC
adaptor from the wall outlet and wipe
away any dust that is built up in the
area around the prongs of the plug.
Keep off of the product and stand.*
Climbing onto the product or stand can
cause it to tip over or become damaged.
Particular care concerning this precaution
is required where small children are
present.
Location
Avoid locating the product on an unstable
stand, on an uneven surface, or any other
unstable location. An unstable location can
cause the product to fall over, creating the
risk of personal injury.
Relocating the Product
Before relocating the product, always
unplug the AC adaptor from the wall outlet
and disconnect all other cables and
connecting cords. Leaving cords connected
creates the risk of damage to the cords, fire,
and electric shock.
Cleaning
Before cleaning the product, always unplug
the AC adaptor from the wall outlet first.
Leaving the AC adaptor plugged in creates
the risk of damage to the AC adaptor, fire,
and electric shock.
Batteries
Misuse of batteries can cause them to leak
resulting in damage to nearby objects, or to
explode, creating the risk of fire and
personal injury. Always make sure you
observe the following precautions.
• Use only batteries that are specified for
use with this product.
• Remove batteries from the product if you
do not plan to use it for a long time.
663A-E-005A
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Connectors
• Should you ever feel any symptoms
similar to those described above when
using this product, stop using it
immediately and contact your physician.
Connect only the specified devices and
equipment to the product’s connectors.
Connection of a non-specified device or
equipment creates the risk of fire and
electric shock.
Heavy Objects
Never place heavy object on top of the
product.
Doing so can make the product top heavy,
causing the product to tip over or the object
to fall from it, creating the risk of personal
injury.
Location
Avoid the following locations for this
product. Such locations create the risk of
fire and electric shock.
• Areas subject to high humidity or large
amounts of dust.
• In food preparation areas or other areas
subject to oil smoke.
• Near air conditioning equipment, on a
heated carpet, in areas exposed to direct
sunlight, inside of a vehicle parked in
the sun, or any other area that subjects
the product to high temperatures.
Correct Stand* Assembly
An incorrectly assembled stand can tip over,
causing the product to fall and creating the
risk of personal injury.
Make sure you assemble the stand correctly,
following the assembly instructions that
come with it. Make sure you mount the
product on the stand correctly.
Display Screen
• Never push on the display screen’s LCD
panel or subject it to strong impact. Doing
so can cause the LCD panel’s glass to
crack, creating the risk of personal injury.
• Should the LCD panel ever crack or
break, never touch the liquid inside of
the panel. LCD panel liquid can cause
skin irritation.
* Stand is available as an option.
IMPORTANT!
When using batteries, be sure to replace them or shift to
one of the alternate power sources whenever you notice
any of the following symptoms.
• Should LCD panel liquid ever get inside
your mouth, immediately wash out your
mouth with water and contact your
physician.
• Should LCD panel liquid ever get into
your eyes or onto your skin, rinse with
clear water for at least 15 minutes, and
then contact a physician.
• Dim power supply indicator
• Instrument does not turn on
• Dim, difficult to read display
• Abnormally low speaker/headphone volume
• Distortion of sound output
• Occasional interruption of sound when playing at high
volumes
• Sudden power failure when playing at high volumes
• Dimming of the display when playing at high volume
• Continued sound output even after you release a key
• A totally different tone may sound
• Abnormal rhythm pattern and demo tune play
• Abnormally low microphone volume
Sound Volume
Do not listen to music at very loud volumes
for long periods. Particular care concerning
this precaution is required when using
headphones. High volume settings can
damage your hearing.
• Distortion of microphone input
• Dim power supply indicator when a microphone is used
• Sudden power failure when using the microphone
• Dimming of keyboard lights when notes sound
• Loss of power, sound distortion, or low volume when
playing from a connected computer
Health Precaution
In extremely rare cases, exposure to strong
sudden light or flashing light can cause
momentary muscle spasms, loss of
consciousness, or other physical problems
with some individuals.
• If you suspect that you might be
susceptible to any condition such as this,
be sure to consult with your physician
before using this product.
• Use this product in an area that is well
illuminated.
E-4
663A-E-006A
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Features
❐ 264 tones
A wide selection of tones includes stereo piano and synthesized sounds, drum sets, and much more.
Other features include digital effects that control the acoustical characteristic of tones.
❐ PIANO BANK button
The touch of a button takes you directly to piano tones and piano lessons.
❐ 3-Step Lesson System
The 3-Step Lesson System lets you practice at your own pace. The keyboard automatically grades your performances, so you can
trace your progress as you improve.
• 3-Step Lesson System: Use any of the keyboard’s built-in tunes and SMF data from a memory card to learn to play as the
keyboard keys light to teach you the correct notes. First practice the timing of the notes. Next, play along at your own pace.
Soon you will be ready for step three, where you play along at normal speed.
* Note that key lights may be difficult to see under direct sunlight or under other very bright lighting.
• Evaluation System: The keyboard can be configured to rate your performances during Step 3 lesson by assigning points.
❐ 100 built-in tunes, including piano pieces
Built-in tunes are divided into two groups: a Song Bank of 65 tunes with Auto Accompaniment, and a Piano Bank of 35 piano
tunes. You can simply enjoy listening to the built-in tunes, or eliminate either hand part of a tune, and then play along on the
keyboard.
❐ 120 rhythms
A selection of rhythms cover rock, pops, jazz and just about any other musical style imaginable.
❐ Auto Accompaniment
Simply play a chord and the corresponding rhythm, bass, and chord parts play along automatically.
❐ Musical Information System
A big LCD screen graphically shows you fingerings and notes, making keyboard play more informative and enjoyable than ever
before.
❐ Storing and Playing Back Tune Data You Transferred from Your Computer
You can connect your keyboard to a computer, use special CASIO conversion software to convert SMF data you purchase or
create to CASIO format, and then transfer it to the keyboard.
❐ Memory Card Slot
You can load a card with a standard MIDI file (SMF) and play it back on the keyboard.
663A-E-007A
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Precautions.................... E-1
Main Features ............................ E-5
Playing a Built-in Tune............ E-18
To play back a Song Bank tune ............. E-18
To play back a Piano Bank tune............. E-19
Musical Information System ................... E-19
Adjusting the Tempo............................... E-19
To pause playback ................................. E-20
To fast reverse ....................................... E-20
To fast forward ....................................... E-20
Looping a Musical Phrase...................... E-20
To change the melody tone .................... E-21
To play all tunes in succession............... E-21
Using the PIANO BANK Button ............. E-21
General Guide............................ E-8
Attaching the Score Stand ..................... E-10
Quick Reference .......................E-11
To play the keyboard .............................. E-11
Power Supply .......................... E-12
Using batteries ....................................... E-12
Using the AC Adaptor............................. E-13
Auto Power Off....................................... E-13
Power On Alert ....................................... E-14
Memory Contents................................... E-14
Using the SMF Data on the
Bundled CD-ROM .................................. E-21
3-Step Lesson.......................... E-22
Connections ............................ E-14
Phones/Output Jack............................... E-14
USB port ................................................ E-15
Sustain/Assignable Jack ........................ E-15
Microphone Jack .................................... E-15
Accessories and Options ....................... E-15
Evaluation Mode .................................... E-23
Using the Lesson Functions and
Evaluation Mode .................................... E-24
Step 1 – Master the timing. .................... E-24
Step 2 – Master the notes. ..................... E-24
Step 3 – Play at normal speed. .............. E-25
Voice Fingering Guide............................ E-26
Using the Metronome............................. E-26
Basic Operations..................... E-16
To play the keyboard .............................. E-16
Selecting a Tone..................................... E-16
Using Tone Effects ................................. E-17
Turning the Key Light System
On and Off.............................................. E-17
Using the Microphone Jack.................... E-17
E-6
663A-E-008A
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Auto Accompaniment ............. E-27
Selecting a Rhythm ................................ E-27
Playing a Rhythm ................................... E-28
Using Auto Accompaniment ................... E-28
Using an Intro Pattern ............................ E-30
Using a Fill-in Pattern............................. E-30
Using a Rhythm Variation....................... E-30
Troubleshooting ...................... E-43
Specifications .......................... E-45
Care of your keyboard ............ E-46
Appendix .................................... A-1
Tone List / Note Table............................... A-1
Drum Assignment List .............................. A-4
FINGERED Chord Chart .......................... A-5
Rhythm List .............................................. A-6
Song List .................................................. A-7
Using a Fill-in Pattern with a Variation
Rhythm................................................... E-31
Synchro Starting Accompaniment with
Rhythm Play........................................... E-31
Finishing with an Ending Pattern ........... E-31
MIDI messages that can be sent
and received using the USB port
Keyboard Settings .................. E-32
Adjusting Accompaniment and
Song Bank Volume ................................ E-32
Transposing the Keyboard ..................... E-33
Tuning the Keyboard .............................. E-33
Connection to a Computer ..... E-34
Connecting to a Computer ..................... E-34
Expanding the Selections in the
Song Bank Tunes................................... E-35
General MIDI Tone ................................. E-36
Changing the Settings............................ E-36
Using a Memory Card ............. E-38
Getting Ready ........................................ E-39
Reading a Memory Card ........................ E-40
Memory Card Error Messages ............... E-41
Company and product names used in this
manual may be registered trademarks of
others.
663A-E-009A
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
1
2
3
4
5
6
7
8
9
0
A
B
O
C
D
E
F
G
H
I J
K
L
M
N
P
K
*1 *2
*
3
Q
R
S
U
V
W
X
Y
Z
[
\
T
E-8
663A-E-010A
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
1
2
3
4
5
6
7
J
K
L
M
N
O
P
Q
R
S
T
MIC VOLUME slider
Power indicator
CHORD root names
Speaker
POWER/MODE switch
MAIN VOLUME slider
FUNCTION button
RHYTHM list
TONE list
SONG BANK list
Display
REVERB/CHORUS button
KEY LIGHT button
PIANO BANK list
Voice 1 to 5 list
TONE button
RHYTHM button
DATA ACCESS lamp
G SONG/PIANO BANK/RHYTHM CONTROLLER
8
REPEAT button, INTRO button
9
REW button, NORMAL/FILL-IN button
0
FF button, VARIATION/FILL-IN button
A
PAUSE button, SYNCHRO/ENDING button
G 3-STEP LESSON
B
U
PLAY/STOP button, START/STOP button
STEP 1 button
C
V
Rhythm controller indicator
STEP 2 button
D
W
Song/Piano Bank controller indicator
STEP 3 button
X
SCORING button
E
TEMPO buttons
Y
LEFT button
F
SONG BANK button
Z
RIGHT button
G
PIANO BANK button
[
METRONOME button
H
CARD button
\
SPEAK button
I
Percussion instrument list
Controller Indicators
Song/Piano Bank controller indicator
Pressing the SONG BANK or PIANO BANK button causes the Song/Piano Bank controller indicator to light. This indicates that
buttons 8 through B are currently functioning as playback control buttons.
Rhythm controller indicator
Pressing the RHYTHM button to enter the Rhythm Mode causes the Rhythm controller indicator to light. This indicates that
buttons 8 through B are currently functioning as rhythm control buttons.
NOTE
• Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that
appear on the display may differ from the examples shown in this User’s Guide.
• Viewing a liquid crystal display screen from an angle can change the appearance of display contrast. The display contrast of
this keyboard is set to allow easy viewing for a person seated on a chair in front of the keyboard. Note that display contrast
is fixed, and cannot be adjusted.
663A-E-011A
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
*1 Attaching the Score Stand
Insert both ends of the music stand provided
with the keyboard into the two holes on the
top surface.
*2
]
^
]
[+] [–]
/
buttons
• Negative values cannot be
input using the number
buttons. Use [+] (increase)
and [–] (decrease) instead.
• For input of numbers to
change a displayed number
or setting.
^
Number buttons
*3
a
a
SD CARD SLOT
Rear Panel
c
d
e
f
b
b
c
d
e
f
USB port
SUSTAIN/ASSIGNABLE JACK
DC 9V jack
MIC IN jack
PHONES/OUTPUT jack
E-10
663A-E-012A
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference
POWER/MODE
SONG BANK
PIANO BANK
Power indicator
Number buttons
STEP2
STEP1
PLAY/STOP
This section provides a quick overview of keyboard operation
using steps one and two of the 3-step lesson feature.
3 Find the tune you want to play in the SONG BANK
List, and then use the number buttons to input its
two-digit number.
• See page A-7 for the SONG BANK List.
Example: To select “54 ALOHA OE”, input 5 and then
To play the keyboard
4.
1 Set the POWER/MODE switch to NORMAL.
• This causes the power indicator to light.
A l o h a
O
e
Lit
4 Press the STEP 1 button or STEP 2 button.
• The keyboard sounds a count beat and waits for you
to play something on the keyboard. The keys that you
need to press first flash.
2 Press the SONG BANK button.
5 Play the melody along with the selected tune’s
accompaniment.
• Play in accordance with the fingerings, notes, and
dynamic marks that appear on the display.
Note pitch Fingering
Indicator appears
A l o h a
O
e
663A-E-013A
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference
Power Supply
If you selected lesson Step 1
This keyboard can be powered by current from a standard
household wall outlet (using the specified AC adaptor) or by
batteries. Always make sure you turn the keyboard off
whenever you are not using it.
• Play the notes on the keyboard.
• Accompaniment (left-hand part) plays in time with
the notes.
• With Step 1, the correct melody note is played no
matter which keyboard key you press.
Using batteries
Always make sure you turn off the keyboard before loading
or replacing batteries.
To load batteries
If you selected lesson Step 2
• Play the correct notes on the keyboard.
1 Remove the battery compartment cover.
2 Load 6 AA-size batteries into the battery
compartment.
• Make sure that the positive (+) and negative (–) ends
are facing correctly.
• Press the keyboard key that lights. Note that with a
Piano Bank tune, the keyboard key light turns off as
soon as you press the key.
• The keyboard key for the next note you will need to
play flashes.
• Accompaniment (left-hand part) plays in time with
the notes, as long as you press the correct keyboard
keys.
6 To stop play at any time, press the PLAY/STOP
3 Insert the tabs on the battery compartment cover
button.
into the holes provided and close the cover.
NOTE
To play an Etude or Concert Piece tune
• The keyboard may not function correctly if you load or
replace batteries with power turned on. If this happens,
turning the keyboard off and then back on again should
return functions back to normal.
1 When you get to step 2 of the above procedure,
press the PIANO BANK button in place of the
SONG BANK button.
Important Battery Information
I
The following shows the approximate battery life.
Manganese batteries ............................... 1 hour
Alkaline batteries .................................... 4 hours
The above value is standard battery life at normal
temperature, with the keyboard volume at medium
setting. Temperature extremes or playing at very loud
volume settings can shorten battery life.
Indicator appears
2 Find the tune you want to play in the PIANO BANK
List, and then use the number buttons to input its
two-digit number.
• See page A-7 for the PIANO BANK List.
3 Next, continue from step 4 of the above procedure.
E-12
663A-E-014A
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
Note the following important precautions to avoid damage
to the power cord.
WARNING
Misuse of batteries can cause them to leak, resulting in
damage to nearby objects, or to explode, creating the risk of
fire and personal injury. Always make sure you observe the
following precautions.
• Never try to take batteries apart or allow them to
become shorted.
GDuring Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
• The power cord should not be stretched tight while it is
in use.
• Never expose batteries to heat or dispose of them by
incineration.
GDuring Movement
• Never mix old batteries with new ones.
• Never mix batteries of different types.
• Do not charge the batteries.
• Make sure the positive (+) and negative (–) ends of
the batteries are facing correctly.
• Before moving the keyboard, be sure to unplug the AC
adaptor from the power outlet.
GDuring Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
CAUTION
IMPORTANT!
Misuse of batteries can cause them to leak resulting in
damage to nearby objects, or to explode, creating the risk of
fire and personal injury. Always make sure you observe the
following precautions.
• Use only batteries that are specified for use with this
product.
• Make sure that the keyboard is turned off before
connecting or disconnecting the AC adaptor.
• Using the AC adaptor for a long time can cause it to
become warm to the touch. This is normal and does not
indicate malfunction.
• Remove batteries from the product if you do not plan
to use it for a long time.
Auto Power Off
When you are using battery power, keyboard power turns
off automatically whenever you leave it on without
performing any operation for about 6 minutes. When this
happens, adjust the POWER/MODE switch to turn power
back on.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified for
this keyboard.
Specified AC Adaptor: AD-5
[Rear Panel]
NOTE
• Auto Power Off is disabled (it does not function) when
you are using the AC adaptor to power the keyboard.
DC 9V jack
AC adaptor AD-5
To disable Auto Power Off
Hold down the TONE button while turning on the keyboard
to disable Auto Power Off.
NOTE
AC outlet
• When this function is turned off, the keyboard does not
turn off automatically no matter how long it is left with
no operation being performed.
• Auto Power Off is enabled again when you manually
turn off power and then turn it back on again.
663A-E-015A
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
Connections
Power On Alert
Phones/Output Jack
Keyboard keys light to alert you if you leave power on and
do not perform any operation for about 6 minutes. Note that
keys light only, and no sound is produced. When this
happens, press any button or keyboard key to clear the power
on alert.
PREPARATION
• Before connecting headphones or other external
equipment, be sure to first turn down the volume settings
of the keyboard and the connected equipment. You can
then adjust volume to the desired level after connections
are complete.
NOTE
• Power on alert operates only when you are powering
the keyboard using the AC adaptor. It does not operate
when you are using batteries.
[Rear Panel]
PHONES/OUTPUT jack
1
Audio connection
Stereo standard plug
To turn off power on alert
White
Red
PIN plug
2
LEFT RIGHT
1 Press the FUNCTION button a number of times until
“DEMO 2” appears on the display.
AUX IN or similar terminal
of audio amplifier
3
Keyboard amp,
guitar amp, etc.
2 Use the [+] and [–] buttons to change the setting to
“oFF”.
1
Connecting Headphones (Figure
)
Connecting headphones cuts off output from the keyboard’s
built-in speakers, so you can play even late at night without
disturbing anyone.
3 Press the FUNCTION button to clear the setting
screen from the display.
2
Audio Equipment (Figure
)
Memory Contents
Even when the keyboard is turned off, user song data saved
as Song Bank tunes are retained as long as power is being
supplied to the keyboard.
Unplugging the AC adaptor when batteries are not loaded
or when batteries are dead cuts off the power supply. This
causes all keyboard settings to be initialized to the initial
factory defaults, and clears all data stored in memory.
Connect the keyboard to an audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. Note that
the standard plug you connect to the keyboard must be a
stereo plug, otherwise you will be able to output only one of
stereo channels. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
Power Requirements
3
Musical Instrument Amplifier (Figure
)
Note the following precautions whenever you want to ensure
that current keyboard settings and memory contents are not
lost.
Use a commercially available connecting cord to connect the
keyboard to a musical instrument amplifier.
• Make sure the keyboard is being supplied power through
the AC adaptor before replacing its batteries.
• Before unplugging the AC adaptor, make sure that fresh
batteries are loaded in the keyboard.
NOTE
• Be sure to use a connecting cord that has a stereo
standard plug on the end you connect to the keyboard,
and a connector that provides dual channel (left and
right) input to the amplifier to which you are connecting.
The wrong type of connector at either end can cause
one of the stereo channels to be lost.
Make sure that keyboard power is turned off before replacing
batteries or unplugging the AC adaptor.
When connected to a musical instrument amplifier, set the
volume of the keyboard to a relatively low level and make
output volume adjustments using the amplifier’s controls.
E-14
663A-E-016A
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection Example
Microphone Jack
PIN plug (red)
PIN jack
You can connect a commercially available microphone to the
microphone jack and sing along with notes played on the
keyboard. For details, see “Using the Microphone Jack” on
page E-17.
To keyboard’s
PHONES/OUTPUT
jack
INPUT 1
INPUT 2
PIN plug (white)
Keyboard or
guitar amp
Stereo standard plug
Standard plug
Accessories and Options
Use only the accessories and options specified for this
keyboard. Use of non-authorized items creates the danger of
fire, electrical shock, and personal injury.
USB port
You can also connect the keyboard to a computer. See
“Connecting to a Computer” on page E-34 for details.
Sustain/Assignable Jack
You can connect an optional sustain pedal (SP-3 or SP-20) to
the SUSTAIN/ASSIGNABLE JACK to enable the capabilities
described below.
For details on how to select the pedal function you want, see
“SUSTAIN/ASSIGNABLE JACK (Default: SUS)” on page
E-37.
SUSTAIN/ASSIGNABLE JACK
SP-20
Sustain Pedal
• With piano tones, depressing the pedal causes notes to
linger, much like a piano’s damper pedal.
• With organ tones, depressing the pedal causes notes to
continue to sound until the pedal is released.
Sostenuto Pedal
• As with the sustain pedal function described above,
depressing the sostenuto pedal causes notes to be sustained.
• This difference between a sostenuto pedal and sustain pedal
is the timing. With a sostenuto pedal, you press the keys
and then depress the pedal before you release the keys.
• Only the notes that are sounding when the pedal is
depressed are sustained.
Soft Pedal
Depressing the pedal softens the sound of the notes being
played.
Rhythm Start/Stop Pedal
In this case, the pedal performs the same functions as the
START/STOP button.
663A-E-017A
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
MAIN VOLUME
POWER/MODE
REVERB/CHORUS
TONE
[+] / [–]
MIC VOLUME
KEY LIGHT
Number buttons
This section provides information on performing basic
keyboard operations.
3 Use the number buttons to input the three-digit tone
number of the tone you want to select.
Example: To select “049 ACOUSTIC BASS”, input 0, 4
and then 9.
To play the keyboard
1 Set the POWER/MODE switch to NORMAL.
A c o . B a s
s
2 Use the MAIN VOLUME slider to set the volume
to a relatively low level.
NOTE
• Always input all three digits for the tone number,
including leading zeros (if any). If you input one or two
digits and stop, the display will automatically clear your
input after a few seconds.
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
• When one of the drum sets is selected (tone numbers
256 through 263), each keyboard key is assigned a
different percussion sound. See page A-4 for details.
3 Play something on the keyboard.
Selecting a Tone
This keyboard comes with 264 built-in tones. Use the
following procedure to select the tone you want.
To select a tone
1 Find the tone you want to use in the TONE List and
note its tone number.
Polyphony
• Not all of the available tones are shown on the tone
list printed on the keyboard console. For a complete
list, see the “Tone List” on page A-1.
The term polyphony refers to the maximum number of notes
you can play at the same time. The keyboard has 32-note
polyphony, which includes the notes you play as well as the
rhythms and auto-accompaniment patterns that are played
by the keyboard. This means that when a rhythm or auto-
accompaniment pattern is being played by the keyboard, the
number of notes (polyphony) available for keyboard play is
reduced. Also note that some of the tones offer only 16-note
polyphony.
2 Press the TONE button.
• When rhythm or auto accompaniment is playing, the
number of sounds simultaneously played is reduced.
Indicator appears
E-16
663A-E-018A
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Using the Microphone Jack
Using Tone Effects
Connecting a commercially available microphone to the MIC
IN jack makes it possible to sing along with the keyboard’s
built-in tunes or with SMF playback. When connecting a
microphone, be sure to first adjust the MIC VOLUME to a
relatively low setting, and then adjust to the level you want
after connecting.
Reverb: Makes your notes resonate
Chorus: Adds more breadth to your notes
1 Press the REVERB/CHORUS button to cycle through
the effect settings as shown below.
• You can find out the current effect setting by looking
at the REVERB and CHORUS indicators.
1 Set the MIC VOLUME slider setting so it is on the
“MIN” side.
On
On
On
Off
2 Turn on the microphone’s on/off switch.
Reverb on
Chorus on
Both on
Both off
3 Use the MIC VOLUME slider to adjust microphone
volume to the level you want.
[Rear Panel]
2 After turning on the effect you want, use the number
buttons or the [+]/[–] buttons to select the effect
Microphone on/off switch
type you want.
Microphone
• Note that you need to select an effect type with the
number buttons or the [+]/[–] buttons within a few
seconds after turning on an effect. If you don’t, the
display will exit the setting screen.
Effect List
Chorus
0: Chorus 1
1: Chorus 2
2: Chorus 3
3: Chorus 4
Reverb
0: Room 1
1: Room 2
2: Hall 1
3: Hall 2
MIC VOLUME slider
IMPORTANT!
Turning the Key Light System On
and Off
• Be sure to use the microphone’s on/off switch to turn off
the microphone and to disconnect the microphone from
the keyboard whenever you are not using it.
Use the following procedure when you want to turn the key
light system on or off.
Recommended Microphone Type
• Dynamic microphone (standard plug)
To turn the key light system on and off
IMPORTANT!
• Be sure to disconnect the microphone from the keyboard
whenever you are not using it.
1 Press the KEY LIGHT button to toggle the key light
system on and off.
• The KEY LIGHT indicator disappears when the key
Howling (Feedback Noise)
light system is turned off.
Any of the following conditions can cause howling (feedback
noise).
• Covering the head of the microphone with your hand
• Positioning the microphone too near to a speaker
Should howling occur, try grasping the microphone further
away from the head, and move away from any nearby
speaker.
NOTE
• The key light system is turned on automatically whenever
you turn on keyboard power.
Static Noise
Fluorescent lighting can cause static noise in the microphone
signal. When this happens, move away from the lighting you
suspect may be causing the static.
663A-E-019A
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
REW
REPEAT
PIANO BANK
SONG BANK
TONE
[+] / [–]
Number buttons
FF
TEMPO
PAUSE
PLAY/STOP
Your keyboard comes with a total of built-in 100 tunes. You
can play back built-in tunes for your own listening pleasure,
or you can use them for practice and even sing-along. Built-
in tunes are divided between the two groups described below.
3 Use the number buttons to input the tune’s two-
digit number.
Example: To select “54 ALOHA OE”, input 5 and then 4.
Song number
Song name
• Song Bank Group: 65 tunes
The tunes in this group are Auto Accompaniment tunes.
• Piano Bank Group: 35 tunes
The piano tunes in this group are subdivided between 10
etudes and 25 concert pieces.
A l o h a
O
e
In addition to the built-in tunes, you can also play back the
tunes you download over the Internet (page E-35).
NOTE
• Tune Number 00 is the initial default Song Bank tune
setting whenever you turn on keyboard power.
• You can also increment the displayed tune number by
pressing [+] and decrement is by pressing [–].
To play back a Song Bank tune
PREPARATION
• Adjust the main volume (page E-16).
4 Press the PLAY/STOP button to start play of the tune.
Staff display
1 Find the tune you want to play in the SONG BANK
List, and note its number.
• See page A-7 for the SONG BANK List.
A l o h a
O
e
2 Press the SONG BANK button to enter the Song
Bank Mode.
Fingering
Chord name
5 Press the PLAY/STOP button to stop playback of
Indicator appears
the Song Bank tune.
• The tune you select continues to play until you stop
it.
E-18
663A-E-020A
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
To play back a Piano Bank tune
Musical Information System
When the keyboard is playing one of its built-in tunes, the
display shows a variety of information about the tune.
1 Find the tune you want to play in the PIANO BANK
List, and note its number.
Example: Display during Song Bank play
• See page A-7 for the PIANO BANK List.
Staff display
2 Press the PIANO BANK button to specify the Piano
Bank group.
A l o h a
O
e
Fingering
Chord name
Indicator appears
NOTE
NOTE
• Chord names are not displayed for Piano Bank tunes.
• Pressing the PIANO BANK button changes the tone to
STEREO PIANO (Tone Number 000).
Adjusting the Tempo
3 Use the number buttons to input the two-digit tune
The tempo (beats per minute) can be set to a value in the
range of 30 to 255. The tempo value you set is used for Song
Bank, Piano Bank, 3-step lesson, and Auto Accompaniment
chord play, as well as playback from memory card and
metronome operation.
number you looked up in step 1.
Example: To select tune number 07 (ODE TO JOY), input
0 and then 7.
y
O d e T o J o
To set the tempo
1 Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
NOTE
• Tune Number 00 is the initial default Piano Bank tune
setting whenever you turn on keyboard power.
• You can also change the displayed tune number using
the [+] and [–] buttons.
: Decreases the tempo value.
Flash
4 Press the PLAY/STOP button to start playback.
Tempo value
5 To stop playback, press the PLAY/STOP button.
NOTE
• The tune you select continues to play until you stop
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
it.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
to its default tempo.
• Piano Bank tunes have tempo changes part way through
in order to produce specific musical effects.
663A-E-021A
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
To pause playback
To fast forward
1 Press the PAUSE button while a tune is playing to
1 While a tune is playing or paused, hold down the
pause it.
FF button to skip forward at high speed.
• The fast forward operation skips forward one measure
at a time.
2 Pressing the PAUSE button again resumes play from
• The measure and beat numbers on the display change
while the fast forward operation is being performed.
the point where it was paused.
To fast reverse
1 While a tune is playing or paused, hold down the
Measure number
Beat number
REW button to skip in a reverse direction at high
speed.
2 Releasing the FF button starts song playback from
• The fast reverse operation skips back one measure at
a time.
the measure whose number is shown on the display.
• The measure and beat numbers on the display change
while the fast reverse operation is being performed.
NOTE
• Fast forward does not work while tune play is stopped.
Measure number
Beat number
Looping a Musical Phrase
You can select one or more measures and “loop” them, which
means that they play again and again until you stop playback.
2 Releasing the REW button starts song playback from
the measure whose number is shown on the display.
1 While the tune is playing, press the REPEAT button
while the measure you want to start from is playing.
• This causes the repeat indicator to flash on the display,
and displays the measure number of the start
measure.
NOTE
• Fast reverse does not work while tune play is stopped.
• Certain playback conditions can cause it to take some
time before fast reverse starts after you press the REW
button.
2 When playback is within the measure you want to
specify as the end of the loop, press the REPEAT
button again.
• This displays the measure number of the end measure,
and starts repeat play of the loop.
• To cancel repeat play of a loop, press the REPEAT
button again so the repeat indicator is not displayed.
E-20
663A-E-022A
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
To change the melody tone
Using the PIANO BANK Button
Pressing the PIANO BANK button provides instant access to
piano tones and piano tune selection.
1 Press the TONE button.
Initial Piano Bank Setting
Tone: 000 STEREO PIANO
To use the piano bank
1 Press the PIANO BANK button.
Indicator appears
2 Find the tone you want in the TONE List, and then
use the number buttons to input its three-digit
number.
Example: To select “057 VIOLIN”, input 0, then 5, then
7.
Indicator appears
• You can select any one of the keyboard’s 264 built-in
tones.
2 Now try playing something on the keyboard.
• The notes you play sound with a piano tone.
V i o l i
n
3 If you want to playback the built-in tune, press the
PLAY/STOP button.
NOTE
• This causes the currently selected tune to play in an
endless loop.
• To stop playback, press the PLAY/STOP button again.
• You can also use the [+] and [–] buttons to change the
melody tones.
• For two-hand tunes (Piano Bank tunes), the same tone
is applied for both the left and right hand parts.
• Specifying the tune number for the same tune that is
currently selected returns the melody tone to the default
setting for that tune.
Using the SMF Data on the
Bundled CD-ROM
The CD-ROM that comes bundled with the keyboard contains
demos as well as 25 tunes (SMF data) that you can use for
step lessons. It also contains PDF format files that contain
To play all tunes in succession
the
sheet
music
of
the
included
tunes.
For a full list of the tunes that are included, open the “List.txt”
file located inside the “MusicDataFolder” on the CD-ROM.
For each tune, “List.txt” shows the tune name, SMF file name,
PDF file name of the music score, and the type of lesson* for
which the tune can be used.
1 Press the SONG BANK button and PIANO BANK
button at the same time.
• Playback starts from Song Bank tune number 00,
followed in sequence by Piano Bank tunes.
* A tune marked with an asterisk (*) can be used for a both-
hand lesson. A tune that is not marked with an asterisk can
be used for a right-hand lesson.
2 To stop tune play, press the PLAY/STOP button.
NOTE
NOTE
• While a tune is playing, you can use the number buttons
or [+] and [–] to change to another tune.
• You can play along with the tunes on the keyboard.
• You can load SMF data from the CD-ROM to the
keyboard using an SD memory card (page E-40) or using
the SMF converter tool (page E-35).
• You will need to have Adobe Reader or Acrobat Reader
installed on your computer in order to view the contents
of a music score PDF file. If neither of these applications
is installed on your computer, see “Installing Adobe
Reader (Acrobat Reader**)” on page E-34.
663A-E-023A
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Step Lesson
PIANO BANK
SONG BANK
[+] / [–]
Number buttons
METRONOME
SPEAK
STEP 1
STEP 2
STEP 3
RIGHT
LEFT
SCORING
TEMPO
PLAY/STOP
With the 3-Step Lesson System, you can practice built-in tunes
and SMF data from a memory card, and even plot your
progress according to the evaluation points the keyboard
awards you.
Lesson Parts
3-Step Lesson lets you practice the right-hand part, left-hand
part, or the parts for both hands.
* See “Using a Memory Card” on page E-38 for information
about using the SMF data from a memory card for playback.
Key Lighting System Operation and
Display Contents During 3-step
Lesson Play
Lesson Progress
Whenever you select an Auto Accompaniment tune for 3-step
lesson play, the key lighting system shows you which keys
to press, while the display shows you the notes and their
fingerings.
Step 1
Step 2
Step 3
Evaluation
Targeted Practice
Note Pitch
The keyboard key that should be pressed lights, while the
actual pitch of the note appears in the display’s staff notation
area. The fingers you should use to play the notes are also
shown on the display.
3-Step Lesson
The 3-step lesson feature takes you through the three distinct
steps described below to help you learn to play tunes on the
keyboard.
Note Length
Keyboard keys stay lit for as long as the note should be
played. The staff notation and fingerings also remain on the
display for the length of the note.
Step 1 – Master the timing.
In this step, pressing any key on the keyboard plays the
correct note, so you can concentrate on getting the timing
right without worrying about playing the right note.
Accompaniment (left-hand part) waits until you press a key
before proceeding to the next phrase.
Next Note
The keyboard key for the next note to be played flashes, while
a number appears on the display near the finger you should
use to play the next note.
Series of Same Pitch Notes
Step 2 – Master the notes.
The keyboard key light turns off momentarily between the
notes and lights again for each successive note. The staff
notation and fingerings also turn off and back on again.
In this step, you use the display to learn which fingers you
should use and how loud or soft to play, and the key light
system to learn which keyboard keys to press.
Accompaniment (left-hand part) waits until your play the
correct note, so you can learn at your own pace.
Step 3 – Play at normal speed.
This is where you enjoy actually playing the tunes you learn
using Step 1 and Step 2. The key light system still shows you
which keyboard keys to press, but accompaniment proceeds
at normal speed regardless of whether or not you play the
correct notes.
E-22
663A-E-024A
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Step Lesson
Evaluation Mode
Example: When play requires pressing keys with fingers 3, 2,
and then 1
The keyboard’s Evaluation Mode awards points to your
performances during Step 3 of the 3-Step Lesson. A perfect
score is 100. Also, the Evaluation Mode provides comments
about your play on the monitor screen.
1st Note
2nd Note
3rd Note
Next note
Current note
Evaluation Mode Display
Lit
Lit
Flash
Flash
Lit
Flash
Level Indicator (9 Levels): This indicator shows the evaluation
of your current performance at a glance. The more segments
that appear, the higher your points.
Key light
Example: 50 points
NOTE
• Note length is not indicated when you are using two-
hand tunes with 3-step lesson Steps 1 and 2. As soon
as you press a lit key, it goes out and the next key to be
played starts to flash.
• Note length is indicated by the key light system when
you use a two-hand tune with Step 3. In this case, the
next key to be pressed does not flash when you press a
lit key and the next finger number does not appear on
the display. Only the current finger number is shown.
Timing Indicator: In the Evaluation Mode, the configuration
of the star changes with each note to let
you know how your timing is. The more
stars, the better your timing.
Evaluation Results
3-step Lesson Tempo Setting
Use the procedure under “Adjusting the Tempo” on page
E-19 to adjust the tempo for 3-step lesson play.
After you finish playing, the keyboard calculates an
evaluation of your total performance, from beginning to end,
and displays your total score on the monitor screen. The
greater the score, the higher your evaluation is.
Evaluation Rank Display Messages
Dynamic Marks
The dynamic marks listed below appear on the display while
tunes are playing. Adjust the pressure you apply to the
keyboard in accordance with the mark that is on the display.
Display Message
“Bravo!”
“Great!”
<High>
Evaluation Ranges
<Low>
pianissimo: Very soft
piano: Soft
“Not bad!”
“Again!”
mezzo piano: Moderately soft
mezzo forte: Moderately loud
forte: Loud
“****” : indicates that the Evaluation Mode was exited
before an evaluation result could be obtained.
fortissimo: Very loud
NOTE
(
<) crescendo: Gradually louder
( ) decrescendo: Gradually softer
cresc.
• If you press the PLAY/STOP button and interrupt the
Evaluation Mode part way through, the monitor screen
shows the evaluation points you have accumulated up
to that point. In this case, the keyboard does not display
a message.
>
decresc.
663A-E-025A
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Step Lesson
4 Press any keyboard keys to play the notes.
Using the Lesson Functions and
Evaluation Mode
Perform the following steps to master your favorite tunes.
Step 1 – Master the timing.
• The key for the next note to be played flashes while
the keyboard waits for you to play it. When you press
any key to play the note, the key remains lit as the
note plays.
• Accompaniment (left-hand part) waits until you press
any key to play a note.
• If you accidentally press more than one key in
succession, accompaniment is played for the
corresponding number of notes.
• Pressing more than one key at the same time counts
as a single note. Pressing a key while another key is
held down is counted as two notes.
1 Select the tune you want to use.
2 Press the RIGHT button or the LEFT button to
specify the part you want to practice.
• If you want to practice both hands, press both buttons
at the same time.
• Indicators appear around the hand on the display
whose part is selected for practice.
5 To stop play at any time, press the PLAY/STOP
button.
Indicators
Step 2 – Master the notes.
3 Press the STEP 1 button to start Step 1 play.
• After a count sounds, they keyboard stands by and
waits for you to play the first note of the tune.
• Voice fingering guide will use a simulated human
voice to call out fingering numbers during one-hand
part practice. See “Voice Fingering Guide” on page
E-26 for details.
1 Select the tune you want to use.
2 Press the RIGHT button or the LEFT button to
specify the part you want to practice.
• If you want to practice both hands, press both buttons
at the same time.
Note pitch Fingering
3 Press the STEP 2 button to start Step 2 play.
• After a count sounds, the keyboard stands by and
waits for you to play the first note of the tune.
• Voice fingering guide will use a simulated human
voice to call out fingering numbers during one-hand
part practice. See “Voice Fingering Guide” on page
E-26 for details.
A l o h a
O
e
Fingering
Indicator appears
A l o h a
O
e
Indicator appears
E-24
663A-E-026A
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Step Lesson
4 Follow the key light system to press the correct
4 Follow the key light system to press the correct
keyboard keys and play the notes.
keyboard keys and play the notes.
• The key for the next note to be played flashes while
the keyboard waits for you to play it. When you press
any key to play the note, the key remains lit as the
note plays.
5 To stop play at any time, press the PLAY/STOP
button.
• If multiple keys light on the on-screen keyboard guide
when you are using a two-hand tune, it means that
you must press all of the keys that are lit.
Evaluation: Find out how the
keyboard evaluates your Step 3 play.
Use the SCORING button to check the evaluation of your
play in Step 3.
5 To stop play at any time, press the PLAY/STOP
button.
1 Press the SCORING button.
• This causes the SCORING indicator to appear on the
display.
Step 3 – Play at normal speed.
• A count beat sounds and then evaluation mode starts.
1 Select the tune you want to play.
2 Press the RIGHT button or the LEFT button to
specify the part you want to practice.
• If you want to practice both hands, press both buttons
at the same time.
3 Press the STEP 3 button to start Step 3 play.
• Accompaniment (left hand part) starts to play at
normal speed.
Indicator appears
2 Play in accordance with the guidance on the
Fingering
monitor screen.
• To stop evaluation, press the PLAY/STOP button. This
displays only the points accumulated up to that point.
A l o h a
O
e
3 After you finished playing, your evaluation result
appears on the display.
• For information about evaluation ranks, see
“Evaluation Results” on page E-23.
• Pressing the SONG BANK button or PIANO BANK
button returns to the tune selection screen.
Indicator appears
B r a v o !
663A-E-027A
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
3-Step Lesson
Voice Fingering Guide
Using the Metronome
Voice fingering guide uses a simulated human voice to call
out fingering numbers during Step 1 and Step 2 one-hand
part practice. If you need to press a key with your thumb, for
example, voice fingering guide says, “One!” In the case of a
chord to be played with your thumb, middle and little finger,
voice fingering guide says, “One, three, five!”
The metronome feature of this keyboard produces a bell
sound for the first beat of each measure, followed by click
sounds for each successive beat of the measure. It is the perfect
tool for practicing tunes without accompaniment (rhythm).
To start the metronome
Voice Fingering Guide calls out fingerings only when you do
not press the proper key when you should.
1 Press the METRONOME button to start sounding
Voice Fingering Guide
the metronome.
One : Thumb
• This causes “Beat” to appear on the display. Perform
step 2 within five seconds after “Beat” appears.
Two : Forefinger
Three : Middle finger
Four : Ring finger
Five : Little finger
To turn voice fingering guide on or off
Press the SPEAK button to toggle voice fingering guide on
(voice fingering guide indicator displayed) and off (indicator
not displayed).
2 Use the number buttons or [+] and [–] to change
the number of beats per measure.
• You can specify 0, or a value from 2 to 6 as the number
of beats per measure.
Indicator
appears
B e a t
NOTE
NOTE
• Note that Voice Fingering is disabled in the Evaluation
Mode.
• The bell (indicating the first beat of a measure) does not
sound while one beat per measure is specified. All beats
are indicated by a click sound. This setting lets you
practice with a steady beat, without worrying about how
many beats there are in each measure.
• Exiting the Evaluation Mode automatically restores the
Voice Fingering setting that was in effect when you
entered the Evaluation Mode.
3 Use the TEMPO buttons to set the tempo.
• Press to increase the tempo (make if faster) or to
decrease it (make it slower).
Flash
Tempo value
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
or tune to its default tempo.
4 To turn off the metronome, press the METRONOME
button.
E-26
663A-E-028A
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
MAIN VOLUME
POWER/MODE
START/STOP
RHYTHM
[+] / [–]
Number buttons
INTRO
NORMAL/FILL-IN
SYNCHRO/ENDING
VARIATION/FILL-IN
This keyboard automatically plays bass and chord parts in
accordance with the chords you finger. The bass and chord
parts are played using sounds and tones that are
automatically selected to select the rhythm you are using.
All of this means that you get full, realistic accompaniments
for the melody notes you play with your right hand, creating
the mood of an one-person ensemble.
Selecting a Rhythm
This keyboard provides you with 120 exciting rhythms that
you can select using the following procedure.
To select a rhythm
1 Find the rhythm you want to use in the RHYTHM
List and note its rhythm number.
• Not all of the available rhythms are shown on the
rhythm list printed on the keyboard console. For a
complete list, see the “Rhythm List” on page A-6.
2 Press the RHYTHM button.
p
P o
1
Indicator appears
3 Use the number buttons to input the three digit
rhythm number for the rhythm you want to select.
Example: To select “075 RHUMBA”, input 0, 7 and then
5.
R h u m b
a
NOTE
• You can also increment the displayed rhythm number
by pressing [+] and decrement it by pressing [–].
• Some rhythms consist of chord accompaniments only,
without any drums or other percussion instruments. Such
rhythms do not sound unless CASIO CHORD or
FINGERED is selected as the accompaniment mode.
663A-E-029A
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
4 To stop Auto Accompaniment play, press the START/
Playing a Rhythm
Use the following procedure to start and stop rhythm play.
STOP button again.
NOTE
To play a rhythm
• If you press the SYNCHRO/ENDING button and then
the INTRO button in place of the START/STOP button
in step 2, accompaniment will start with an intro pattern
when you perform the operation in step 3. For details
about these buttons, see pages E-30 and E-31.
• If you press the SYNCHRO/ENDING button in place of
the START/STOP button in step 4, an ending pattern
will play before accompaniment play is ended. For details
about this button, see page E-31.
• You can adjust the accompaniment part volume level
independently of the main volume. For details, see
“Adjusting Accompaniment and Song Bank Volume” on
page E-32.
1 Set the POWER/MODE switch to NORMAL.
2 Press the START/STOP button to start play of the
currently selected rhythm.
3 To stop rhythm play, press the START/STOP button
again.
NOTE
• All of the keyboard keys are melody keys while the
POWER/MODE switch is set to NORMAL.
CASIO CHORD
Using Auto Accompaniment
This method of chord play makes it possible for anyone to
easily play chords, regardless of previous musical knowledge
and experience. The following describes the CASIO CHORD
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play CASIO CHORDs.
The following procedure describes how to use the keyboard’s
Auto Accompaniment feature. Before starting, you should
first select the rhythm you want to use and set the tempo of
the rhythm to the value you want.
CASIO CHORD Accompaniment Keyboard and Melody
Keyboard
To use Auto Accompaniment
Accompaniment
Melody keyboard
keyboard
1 Set the POWER/MODE switch to CASIO CHORD
or FINGERED.
2 Press the START/STOP button to start play of the
currently selected rhythm.
NOTE
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
3 Play a chord.
• The actual procedure you should use to play a chord
depends on the current POWER/MODE switch
position. Refer to the following pages for details on
chord play.
CASIO CHORD .......................... Page E-28
FINGERED ................................... Page E-29
R h u m b
a
Chord name
E-28
663A-E-030A
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
Chord Types
FINGERED
CASIO CHORD accompaniment lets you play four types of
chords with minimal fingering.
FINGERED provides you with a total of 15 different chord
types. The following describes the FINGERED
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play a C-root chord using FINGERED.
Chord Types
Example
Major chords
C Major (C)
Major chord names are marked above
the keys of the accompaniment
keyboard. Note that the chord
produced when you press an
accompaniment keyboard does not
change octave, regardless of which
key you use to play it.
CDE F GABCDE F
FINGERED Accompaniment Keyboard and Melody
Keyboard
Accompaniment
Melody keyboard
keyboard
Minor chords (m)
C minor (Cm)
To play a minor chord, keep the major
chord key depressed and press any
other accompaniment keyboard key
located to the right of the major chord
key.
CDE F GABCDE F
NOTE
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
Seventh chords (7)
C seventh (C7)
To play a seventh chord, keep the
major chord key depressed and press
any other two accompaniment
keyboard keys located to the right of
the major chord key.
CDE F GABCDE F
C
Cm
Cdim
Minor seventh chords (m7)
C minor seventh (Cm7)
To play a minor seventh chord, keep
the major chord key depressed and
press any other three accompaniment
keyboard keys located to the right of
the major chord key.
CDE F GABCDE F
Caug*1
Cm7*2
C7ꢀ5 *1
Cmadd9*2
Csus4
Cmaj7*2
C7sus4
CmM7*2
C7*2
Cm7ꢀ5
Cadd9*2
Cdim7*1
NOTE
• It makes no difference whether you press black or white
keys to the right of a major chord key when playing minor
and seventh chords.
See the FINGERED Chord Chart on page A-5 for details on
playing chords with other roots.
*1: Inverted fingerings cannot be used. The lowest note is
the root.
*2: The same chord can be played without pressing the 5th
G.
663A-E-031A
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
NOTE
Using a Fill-in Pattern
Fill-in patterns let you momentarily change the rhythm
pattern to add some interesting variation to your
performances.
• Except for the chords specified in note*1 above, inverted
fingerings (i.e. playing E-G-C or G-C-E instead of C-E-
G) will produce the same chords as the standard
fingering.
• Except for the exception specified in note*2 above, all
of the keys that make up a chord must be pressed.
Failure to press even a single key will not play the desired
FINGERED chord.
The following procedure describes how to use the Fill-in
feature.
To insert a fill-in
1 Press the START/STOP button to start rhythm play.
Using an Intro Pattern
This keyboard lets you insert a short intro into a rhythm
pattern to make startup smoother and more natural.
2 Press the NORMAL/FILL-IN button to insert a fill-
in pattern for the rhythm you are using.
The following procedure describes how to use the Intro
feature. Before starting, you should first select the rhythm
you want to use, and set the tempo.
NOTE
• The fill-in pattern does not play if you press the
NORMAL/FILL-IN button while an intro pattern is playing.
To insert an intro
Using a Rhythm Variation
In addition to the standard rhythm pattern, you can also
switch to a secondary “variation” rhythm pattern for a bit of
variety.
1 Press the INTRO button to start the selected rhythm
with an intro pattern.
• With the above setup, the intro pattern is played and
the auto accompaniment with intro pattern starts as
soon as you play chords on the accompaniment
keyboard.
To insert the variation rhythm pattern
NOTE
1 Press the START/STOP button to start rhythm play.
• The standard rhythm pattern starts to play after the intro
pattern is complete.
• Pressing the VARIATION/FILL-IN button while an intro
pattern is playing causes the variation pattern to sound
after the intro pattern is complete.
2 Press the VARIATION/FILL-IN button to switch to
the variation pattern for the rhythm you are using.
NOTE
• To switch back to the standard rhythm pattern, press
the NORMAL/FILL-IN button.
E-30
663A-E-032A
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
Using a Fill-in Pattern with a
Variation Rhythm
You can also insert a fill-in pattern while a variation rhythm
pattern is playing.
Finishing with an Ending Pattern
You can end your performances with an ending pattern that
brings the rhythm pattern you are using to a natural-sounding
conclusion.
The following procedure describes how to insert an ending
pattern. Note that the actual ending pattern played depends
on the rhythm pattern you are using.
To insert a fill-in into a rhythm variation
1 While a variation rhythm pattern is playing, press
the VARIATION/FILL-IN button to insert a fill-in
pattern for the variation rhythm you are using.
To finish with an ending pattern
1 While the rhythm is playing, press the SYNCHRO/
ENDING button.
• This causes the ending pattern to play, which brings
rhythm accompaniment to an end.
Synchro Starting Accompaniment
with Rhythm Play
You can set up the keyboard to start rhythm play at the same
time you play the accompaniment on the keyboard.
NOTE
• The timing when the ending pattern starts depends on
when you press the SYNCHRO/ENDING button. If you
press the button before the second beat of the current
measure, the ending pattern starts playing immediately.
Pressing the button at any point in the measure after
the second beat results in the ending pattern playing
from the beginning of the following measure.
The following procedure describes how to use synchro start.
Before starting, you should first select the rhythm you want
to use, set the tempo, and use the POWER/MODE switch to
select the chord play method you want to use (NORMAL,
CASIO CHORD, FINGERED).
To use synchro start
1 Press the SYNCHRO/ENDING button to put the
keyboard into synchro start standby.
Flash
2 Playing a chord and the rhythm pattern starts to
play automatically.
NOTE
• If the POWER/MODE switch is set to NORMAL, only
the rhythm plays (without a chord) when you play on the
accompaniment keyboard.
• If you press the INTRO button before playing anything
on the keyboard, the rhythm starts automatically with
an intro pattern when you play something on the
accompaniment keyboard.
• Pressing the VARIATION/FILL-IN button before playing
anything on the keyboard causes play to start with the
variation pattern when something is played on the
keyboard.
• To cancel synchro start standby, press the SYNCHRO/
ENDING button one more time.
663A-E-033A
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
FUNCTION
[+] / [–]
Number buttons
About FUNCTION button
To adjust built-in tune volume
Each press of the FUNCTION button cycles through the
setting screens. If you accidentally pass the screen you want
to use, keep pressing the FUNCTION button until the screen
appears again.
Enter the Song Bank mode or Piano Bank mode, and then
perform the procedure under “To adjust the accompaniment
volume”.
• In this case, a song volume screen will appear in place of
the accompaniment volume screen.
Adjusting Accompaniment and
Song Bank Volume
You can adjust the volume of the accompaniment and Song
Bank tunes independently of the notes you play on the
keyboard. You can specify a volume level in the range of 000
(minimum) to 127 (maximum).
NOTE
• Pressing [+] and [–] buttons at the same time
automatically sets an accompaniment volume of 127.
To adjust volume for playback of SMF
data from a memory card
Load a memory card into the card slot, and then perform the
procedure under “To adjust the accompaniment volume”.
• In this case, a song volume screen will appear in place of
the accompaniment volume screen.
To adjust the accompaniment volume
1 Press the FUNCTION button until the
accompaniment volume adjustment screen
appears.
p
A c o m V o
l
Current accompaniment volume setting
2 Use the number buttons or the [+]/[–] buttons to
change the current volume setting value.
Example: 110
p
A c o m V o
l
NOTE
• The current accompaniment volume value that appears
in Step 1 automatically clears from the display if you do
not input anything within about five seconds.
• Pressing [+] and [–] buttons at the same time
automatically sets an accompaniment volume of 115.
E-32
663A-E-034A
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
Transposing the Keyboard
Tuning the Keyboard
Use the following procedure to fine tune the keyboard to
match the tuning of another musical instrument.
Transpose lets you raise and lower the overall key of the
keyboard in semitone units. If you want to play an
accompaniment for a vocalist who sings in a key that’s
different from the keyboard, for example, simply use
transpose to change the key of the keyboard.
To tune the keyboard
1 Press the FUNCTION button until the tuning screen
To transpose the keyboard
appears.
1 Press the FUNCTION button until the transpose
screen appears on the display.
T u n e
2 Use [+] and [–] to change the transpose setting of
the keyboard.
2 Use the [+], [–], and the number buttons to adjust
Example: To transpose the keyboard five semitones
the tuning value.
upwards
.
Example: To lower tuning by 20
T r a n s .
T u n e
NOTE
• The keyboard can be transposed within a range of –12
to +12.
• The default transpose setting is “00” when keyboard
power is turned on.
• If you leave the transpose screen on the display for about
five seconds without doing anything, the screen is
automatically cleared.
• The transpose setting also affects playback from Auto
Accompaniment.
NOTE
• The keyboard can be tuned within a range of –50 cents
to +50 cents.
* 100 cents is equivalent to one semitone.
• The default tuning setting is “00” when keyboard power
is turned on.
• If you leave the tuning screen on the display for about
five seconds without doing anything, the screen is
automatically cleared.
• To return the keyboard to its default key, perform the
above procedure and press the [+] and [–] buttons at
the same time in step 2.
• The effect of a transpose operation depends on the pitch
of each note and on the tone you are currently using. If
a transpose operation causes a note to be outside of
the allowable range for a tone, the same note in the
nearest octave within the range will be substituted.
• The tuning setting also affects playback from Auto
Accompaniment.
• To return the keyboard to its default tuning, perform the
above procedure and press the [+] and [–] buttons at
the same time in step 2.
663A-E-035A
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a Computer
FUNCTION
[+] / [–]
Number buttons
LEFT
RIGHT
Minimum Computer system Requirements
Connecting to a Computer
Supported Operating Systems
The keyboard’s USB port makes it quick and simple to connect
to a computer. After installing the USB MIDI driver onto your
computer from the CD-ROM that comes with the keyboard,
you will be able to use commercially available MIDI software
on your computer to exchange data between the keyboard
and your computer.
Operation is supported under Windows® XP, Windows® 2000,
Windows® Me, Windows® 98SE, and Windows® 98.
G Universal
• IBM AT or compatible computer
• USB port that provides normal operation under Windows
• CD-ROM drive (for installation)
• At least 2MB of free hard disk space (not including space
required for Adobe Reader)
To install the USB MIDI driver
1 On the computer to which you plan to connect,
G Windows XP
• 300MHz or higher Pentium processor
• At least 128MB of memory
install the USB MIDI driver that comes on the CD-
ROM that comes bundled with the keyboard.
• For information about installing the USB MIDI driver,
see the “CASIO USB MIDI Driver User’s Guide”
(manual_e.pdf) on the “USB Manual and Driver CD-
ROM”.
G Windows 2000
• 166MHz or higher Pentium processor
• At least 64MB of memory
NOTE
G Windows Me, Windows 98SE, Windows 98
• Before starting actual installation of USB MIDI driver,
be sure to read the contents of the “readme.txt” file in
the “English” folder on the CD-ROM.
• 166MHz or higher Pentium processor
• At least 32MB of memory
Driver Signing
• Use Adobe Reader or Acrobat Reader to access the USB
MIDI driver user’s guide.*
G Windows XP
1 Log on to Windows XP using a Computer
administrator account. See the documentation that
comes with Windows XP for information about
Computer administrator accounts.
* You need to have Adobe Reader or Acrobat Reader installed on
your computer in order to view the contents of the “CASIO USB
MIDI Driver User’s Guide” (manual_e.pdf). If your computer
does not have either Adobe Reader or Acrobat Reader installed,
use the procedure below to install it.
2 On the Windows [Start] menu, click [Control
Installing Adobe Reader (Acrobat Reader**)
• Place the “USB Manual and Driver CD-ROM” into your
computer’s CD-ROM drive.
• On the CD-ROM, navigate to the folder named “Adobe”,
open the folder named “English”, and then double-click
“ar601enu.exe” (“ar505enu.exe”**). Follow the instructions
that appear on your computer screen to install Adobe
Reader.
Panel].
• If you cannot see the [System] icon on the Control
Panel, click [Switch to Classic View].
3 Click the [System] icon. On the dialog box that
appears, click the [Hardware] tab, and then click
the [Driver Signing] button.
** Adobe Reader cannot be installed on a computer running
Windows 98. If your computer is running under Windows 98,
double-click “ar505enu.exe” to install Acrobat Reader.
4 On the dialog box that appears, select [Ignore], and
then click [OK].
E-34
663A-E-036A
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a Computer
G Windows 2000
Expanding the Selections in the
Song Bank Tunes
You can transfer song data from your computer to the
keyboard. You can store up to 10 tunes (about 320 KB) as
Song Bank tunes 65 through 74. For SMF data you purchase
or create, you need to use an SMF Converter to convert it to
CASIO format before transferring it to the keyboard.
1 Log on using an Administrators group account. See
the documentation that comes with Windows 2000
for information about the Administrators group.
2 On the Windows [Start] menu, point to [Settings]
and then click [Control Panel].
3 Click the [System] icon. On the dialog box that
appears, click the [Hardware] tab, and then click
the [Driver Signing] button.
To install the SMF Converter
1 On the computer to which you plan to connect,
install the SMF Converter that comes on the CD-
4 On the dialog box that appears, select [Ignore], and
ROM that comes bundled with the keyboard.
• On the CD-ROM, double-click “SMFConv-e.exe”, and
then follow the instructions that appear on your
computer screen to install SMF Converter.
then click [OK].
NOTE
• Company and product names used herein are
trademarks of their respective owners.
* Before installing SMF Converter, be sure to read the contents of
the “smfreadme.txt” file in each language folder on the CD-ROM.
For information about using SMF Converter, double-click
“index.html” in the [help] folder, which was created when
you installed SMF Converter. You can also access user
documentation from the Windows [Start] menu by clicking
[Programs] - [CASIO] - [SMF Converter] - [manual].
Using the USB port
Note that you need to purchase a commercially available USB
cable to connect the keyboard to a computer using the USB
port. Once you establish a USB connection between the
keyboard and a computer, you can exchange data between
them.
* A browser that supports frames (like Internet Explorer 4 or
Netscape Navigator 4.04 or higher) is required to view the SMF
Converter manual.
Minimum Computer System Requirements
To connect to a computer using the
USB port
* Operating System:
Windows 98SE
Windows Me
Windows XP
1 Use a commercially available USB cable to connect
* Storage
At least 10MB free HDD space
the keyboard to the computer.
* USB interface
Computer
USB port
USB cable
• You can also obtain a copy of the SMF Converter by
downloading it at the Web page shown below. After
downloading, install the software on your computer.
CASIO MUSIC SITE
USB connector
Keyboard USB port
• In addition to the software itself, the CASIO MUSIC SITE
will also provide you with information about its installation
and use. You can also find out about the latest news about
your keyboard and other CASIO musical instruments, and
much more.
663A-E-037A
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a Computer
Song Data Storage
NAVIGATE CHANNEL (Default: 4)
Song data saved as Song Bank tunes are retained even when
power is turned off, as long as the keyboard is being supplied
battery or AC adaptor power. If you remove the batteries or
should the batteries go dead while the keyboard is not being
supplied power by the AC adaptor, song data will be deleted.
Be sure to supply power to the keyboard with the AC adaptor
when replacing batteries.
When messages are received from a computer for play on
this keyboard, the navigate channel is the channel whose note
data appears on the display. You can select one channel from
01 to 16 as the navigate channel. Since this setting lets you
use the data on any channel of commercially available SMF
data to light on the on-screen keyboard guide, you can
analyze how different parts of an arrangement are played.
NOTE
1 Press the FUNCTION button until the NAVIGATE
• This keyboard supports SMF 0 and 1 format data.
• Voice Fingering Guide and on-screen fingering indicators
are not supported for commercially available SMF data.
CHANNEL screen appears.
N a v i
.
C
h
General MIDI Tone
The General MIDI standard defines the tone numbering
sequence, the drum sound numbering sequence, the number
of MIDI channels that can be used, and other general factors
that determine the sound source configuration. Because of
this, musical data produced on a General MIDI sound source
can be played back using similar tones and identical nuances
as the original, even when played on another manufacturers
sound source.
2 Use the [+], [–], and the number buttons [0] through
[9] to change the channel number.
Example: To specify channel 2
N a v i
.
C
h
This keyboard conforms with General MIDI standards, so it
can be connected to a computer and used to play back General
MIDI data that has been purchased, downloaded from the
Internet, or obtained from any other source.
To turn off specific sounds before playing back tune data
that is being received
<<Navigate channel on/off>>
1 While playing tune data, press the RIGHT button.
• This cuts the sound of the navigate channel, but on-
screen keyboard guide keys continue to light in
accordance with the channel’s data as it is received.
Press RIGHT button again to turn the channel back
on.
Changing the Settings
This section tells you how to make the settings required when
connecting to a computer.
KEYBOARD CHANNEL (Default: 1)
The keyboard channel is the channel used to send messages
from this keyboard to a computer. You can specify one channel
from 1 to 16 as the keyboard channel.
<<Next lower channel from navigate channel on/off>>
1 While playing tune data, press the LEFT button.
• This cuts the sound of the channel whose number is
one less than the navigate channel, but on-screen
keyboard guide keys continue to light in accordance
with the channel’s data as it is received. Press LEFT
button again to turn the channel back on.
1 Press the FUNCTION button until the KEYBOARD
CHANNEL screen appears.
y
K e
b
d
C
h
Example: If the navigate channel is channel 4, the above
operation turns off channel 3.
2 Use the [+], [–], and the number buttons to change
the channel number.
Example: To specify channel 4
y
K e
b
d
C
h
E-36
663A-E-038A
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a Computer
GM Mode Receive
LOCAL CONTROL (Default: On)
When GM off is received and the mode switch is set to a chord
mode, the Auto Accompaniment chord is specified in
accordance with the received message.
oFF: Anything played on the keyboard is output as a message
from the USB port, without being sounded by the
internal sound source.
When GM on is received, Auto Accompaniment chords
cannot be specified by received messages.
• Note that no sound is produced by the keyboard if LOCAL
CONTROL is turned off and no external device is
connected.
SUSTAIN/ASSIGNABLE JACK
(Default: SUS)
1 Press the FUNCTION button until the LOCAL
SUS(sustain): Specifies a sustain*1 effect when the pedal is
CONTROL screen appears.
depressed.
Example: When LOCAL CONTROL is on
SoS (sostenuto): Specifies a sostenuto*2 effect when the
pedal is depressed.
L o c a
l
SFt (soft): Specifies reduction of the sound’s volume when
the pedal is depressed.
rHy (rhythm): Specifies START/STOP button operation
2 Use the [+] and [–] or [0] and [1] buttons to turn
when the pedal is depressed.
the setting on and off.
Example: To turn LOCAL CONTROL off
1 Press the FUNCTION button until the SUSTAIN/
ASSIGNABLE JACK screen appears.
L o c a
l
Example: When sustain is currently set
J a c k
ACCOMP OUT (Default: Off)
on: Auto Accompaniment is played by the keyboard and
2 Use the [+] and [–] or [0], [1], [2], and [3] buttons
the corresponding message is output from the USB port.
to change the setting.
oFF: Auto Accompaniment messages are not output from the
Example: To select rhythm
USB port.
J a c k
1 Press the FUNCTION button until the ACCOMP
OUT screen appears.
Example: When ACCOMP OUT is off
*1 Sustain
With piano tones and other sounds that decay, the pedal acts
as a damper pedal, with sounds being sustained longer when
the pedal is depressed. With organ tones and other continuous
sounds, notes played on the keyboard continue to sound until
the pedal is released. In either case, the sustain effect is also
applied to any notes that are played while the pedal is
depressed.
p
A c o m O u
t
2 Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn ACCOMP OUT on
*2 Sostenuto
This effect performs the same way as sustain, except that it is
applied only to notes that are sounding already when the
pedal is depressed. It does not affect notes that are played
after the pedal is depressed.
p
A c o m O u
t
663A-E-039A
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
FUNCTION
CARD
[+] / [–]
Number buttons
STEP 1
STEP 2
SCORING
STEP 3
SD CARD SLOT
START/STOP
Your keyboard is equipped with a card slot
that supports use of memory cards
(commercially available SD memory card
• Avoid storing and using memory cards in the following
types of locations. Such conditions can cause corruption
of data stored on the card.
or optional CASIO song data card*). This makes it possible
for the keyboard to directly read commercially available SMF
data, which has been saved to a memory card from your
computer, for listening pleasure and lessons. Memory card
data can be used the same way as built-in tunes.
• Areas subject to high temperatures, high humidity, or
corrosive agents
• Areas subject to strong electrostatic charge or
electrical noise
• Whenever handling a memory card, make sure that you
never touch its contacts with your fingers.
• If the data access lamp is lit and the message “Pls Wait”
is on the display, it means that data on the memory card
is being accessed by a save, read, or delete operation.
Never remove the memory card from the card slot or
turn off the keyboard while the card is being accessed.
Doing so can corrupt the data on the memory card or
even damage the card slot.
• Never try to insert anything that is not an SD memory
card or optional CASIO song data card* into the
Keyboard’s memory card slot. Doing so can cause
malfunction of the keyboard.
G Supported Memory Cards:
SD memory cards, optional CASIO song data cards*
G Supported SD Cards:
1 GB or less (Cards with capacity greater than 1 GB are
not supported.)
G Maximum Number of Importable Songs: Up to 1,000
• The actual number of songs that can be imported
depends on the size of each file. The actual number will
be less than 1,000 when individual song files are large.
G Supported Data:
• Inserting a memory card that is charged with static
electricity into the card slot can cause malfunction of
the keyboard. If this happens, turn the keyboard off and
then back on again.
• A memory card that has been in the card slot for a long
time may feel hot when you remove it. This is normal
and does not indicate malfunction.
SMF Format 0, CASIO Original Format CM2
IMPORTANT!
• Use only an SD memory card or an optional CASIO song
data card* with this keyboard. Proper operation is not
guaranteed when any other type of card is used.
• Note that a memory card has a limited service life. After
long use, you may not be able to store data to, read
data from, and/or delete data from a card. When this
happens, you will need to purchase a new memory card.
Memory Card and Card Slot
Precautions
IMPORTANT!
* May not be available in some geographic areas.
• Be sure to carefully read all documentation that comes
with the memory card for important information about
how to handle it.
• SD memory cards have a write protect switch, which
you can use to protect against accidental deletion of
data. After saving important data to an SD memory card,
be sure to use the write protect switch to protect the
data against accidental changes or deletion.
CASIO COMPUTER CO., LTD. assumes no responsibility
for any loss or damage to you or any third party arising
out of the loss or corruption of data.
E-38
663A-E-040A
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
Inserting and Removing a Memory
Card
Getting Ready
IMPORTANT!
IMPORTANT!
• Make sure you turn off the keyboard before inserting or
removing a memory card.
• Be sure to orient the card correctly when inserting it.
Never try to force a memory card into the card slot when
you feel resistance.
• Never remove the memory card from the card slot or
turn off the keyboard while card data is being accessed
by a read or format operation. Doing so can corrupt the
data on the memory card or even damage the card slot.
• Before you can use an SD memory card with this
keyboard, you need to perform the procedure below to
format it. After formatting the card, transfer SMF data
from your computer to the card.
• Formatting an SD memory card with this keyboard
automatically creates a folder named “MUSICDAT” on
the card. When transferring SMF data from your
computer to the card for use by the keyboard, be sure
to store it in the “MUSICDAT” folder.
• Note that formatting a card that already contains data
causes all of that data to be deleted. Data deleted by
the format operation cannot be recovered. Before
performing the procedure below, check to make sure
that the media does not contain any data you might need.
To insert a memory card into the card slot
1 With the front side of the memory card facing
upwards, carefully slide it into the card slot. Slide
the card all the way in until you hear it click
securely into place.
PREPARATION
• Insert the SD memory card you want to format into the
keyboard’s card slot. Make sure that the SD memory
card’s write protect is removed, which enables writing.
To format an SD memory card
1 Press the FUNCTION button a number of times until
the card format setting screen appears.
Front
F o r m a t
?
To remove a memory card from the card slot
2 Press the [+] (YES) button.
1 Press the memory card into the card slot and then
release it. This will cause the card to come part
way out of the keyboard.
• This will display a confirmation message asking
whether you really want to format the media.
3 Press the [+] (YES) button to start formatting.
• The message “Pls Wait” will remain on the display to
indicate that a procedure is being performed. Never
try to perform any other operation on the keyboard
while the card is being formatted. After formatting is
complete, the keyboard returns to the mode you were
in before you displayed the setting screen.
2 Pull the memory card out of the card slot.
• To cancel the format operation, press the [–] (NO)
button. This returns to the card format setting screen.
• If an error message appears on the display, see
“Memory Card Error Messages” on page E-41.
Pressing the FUNCTION button while an error
message is on the display returns to the card format
setting screen.
663A-E-041A
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
I To evaluate your play using SMF Data
Reading a Memory Card
3-1 Press the SCORING button.
1 Press the CARD button.
• The keyboard will read the SMF data and enter the
Evaluation Mode.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see “Memory Card
Error Messages” on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• On-screen fingering indicators are not supported
for SMF data.
Indicator appears
2 Use the number buttons to input the three-digit
number that corresponds to the SMF data you want
to select.
4 Press the START/STOP button to stop SMF data play.
3 Perform one of the following operations.
I To play back SMF data
3-1 Press the START/STOP button.
• The keyboard will read the SMF data and play it.
I To use SMF data in a 3-Step Lesson
3-1 Press the STEP 1, STEP 2, or STEP 3 button.
• The keyboard will read the SMF data and start a
lesson at the step you selected.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see “Memory Card
Error Messages” on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• Voice Fingering Guide and on-screen fingering
indicators, are not supported for SMF data.
E-40
663A-E-042A
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
Memory Card Error Messages
Display Message
Cause
Action
Err No Card
There is no memory card loaded in the keyboard
or the memory card you are using is not loaded
correctly.
Load a memory card or correctly reinsert the
memory card.
..................................................................... page E-39
Err No File
(1) The memory card song data that is supported
by the keyboard is not in the MUSICDAT folder.
(2) The memory card does not have a MUSICDAT
folder.
(1) Move the files containing song data supported
by the keyboard to the MUSICDAT folder.
(2) Create a MUSICDAT folder and move the
applicable files into the folder. Formatting the
card will create
automatically.
a
MUSICDAT folder
..................................................................... page E-39
Err WrongDat
Err SizeOver
The data is damaged.
Take the necessary steps to replace the damaged
data with normal data.
The file is too large to be played by this keyboard.
The maximum supported file size is 320 KB. Select
a smaller file.
..................................................................... page E-40
Err Protect
Err Format
The memory card is write-protected.
Remove write protection and re-format the card.
............................................................. pages E-38, 39
(1) The memory card has a format that is not
supported by this keyboard.
(2) The memory card has a capacity that is not
supported by this keyboard.
(1) Use this keyboard to format the card.
............................................................... page E-39
(2) This keyboard supports cards with a capacity
of 1 GB or less.
............................................................... page E-38
(3) Use a different card.
(3) There is something wrong with the memory
card.
Err Not SMF0
Err Card R/W
There is no Format 0 SMF format file. This keyboard
supports Format 0 SMF files only.
Use a Format 0 SMF format file.
..................................................................... page E-38
The memory card cannot be written to or formatted
for some reason.
Use a different card.
663A-E-043A
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Memory Card
Err Mem Full
The keyboard ran out of memory for SMF data
reading during a playback, lesson or use of the
evaluation feature.
After a few seconds, the “Err Mem Full” message will be replaced by one of the messages described
below.
<“dEL UsrSong?”>
This message asks whether you want to delete the contents of Song Bank user area for storage of SMF
data (10 songs) in order to make room for the SMF data you are trying to read. To clear this message
and return to the Card Bank Mode screen, press the [–] (NO) button.
1) Press the [+] (YES) button if you want to delete Song Bank user area contents.
• This causes a confirmation message to appear on the display.
• If you want to cancel the delete operation, press the [–] (NO) button. This returns you to the
confirmation message.
2) Press the [+] (YES) button to delete Song Bank user area contents.
• After Song Bank user area contents are deleted, the keyboard automatically starts reading of the
SMF data you originally selected, and then starts the playback, lesson, or evaluation.
Card Bank Mode screen
Playback
Step1 to 3
Scoring1 to 3
Err Mem Full
After a few seconds
NO(–)
dEL UsrSong?
YES(+)
NO(–)
Sure ?
YES(+)
Pls Wait
The keyboard starts the playback, lesson, or evaluation
E-42
663A-E-044A
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Action
See page
No keyboard sound
(1) Power supply problem.
(1) Correctly attach the AC
adaptor, make sure that
batteries poles (+/–) are facing
correctly, and check to make
sure that batteries are not dead.
(2) Adjust the POWER/MODE
switch to turn on power.
Page E-13
(2) Power is not turned on.
(3) Volume setting is too low.
Page E-16
Page E-16
Page E-28
(3) Use the MAIN VOLUME slider
to increase volume.
(4) The POWER/MODE switch is
in the CASIO CHORD or
FINGERED position.
(4) Normal play is not possible on
the accompaniment keyboard
while the POWER/MODE
switch is set to CASIO CHORD
or FINGERED. Change the
POWER/MODE switch setting
to NORMAL.
(5) LOCAL CONTROL is off.
Low battery power
(5) Turn on LOCAL CONTROL.
Page E-37
Any of the following symptoms
while using battery power.
Replace the batteries with a set of
new ones or use the AC adaptor.
Pages
E-12, 13
• Dim power supply indicator
• Instrument does not turn on
• Dim, difficult to read display
• Abnormally low speaker/headphone volume
• Distortion of sound output
• Occasional interruption of sound when playing at high volumes
• Sudden power failure when playing at high volumes
• Dimming of the display when playing at high volume
• Continued sound output even after you release a key
• A totally different tone may sound
• Abnormal rhythm pattern and demo tune play
• Abnormally low microphone volume
• Distortion of microphone input
• Dim power supply indicator when a microphone is used
• Sudden power failure when using the microphone
• Dimming of keyboard lights when notes sound
• Loss of power, sound distortion, or low volume when playing from a connected computer
Auto Accompaniment does not
sound.
Accompaniment volume is set to
000.
Use the FUNCTION button to
increase the volume.
Page E-32
Key light stays on.
Keyboard is waiting for play of
the correct note during Step 1 or
Step 2 play.
• Press the lit key to continue with
Step 1 or Step 2 play.
• Press the PLAY/STOP button to
quit Step 1 or Step 2 play.
Pages
E-24, 25
Pages
E-24, 25
Keys are lit though no sound is
being produced.
Power on alert is reminding you
that power was left on without
any operation being performed.
Press any button or keyboard key
to restore power to normal.
Page E-14
Page E-37
Page E-17
Cannot
record
chord
ACCOMP OUT is turned off.
Turn on ACCOMP OUT.
accompaniment data on
computer.
a
Static noise when a microphone is
connected.
Use of the microphone in the
vicinity of fluorescent lighting.
Move the microphone away from
source of the static.
663A-E-045A
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Action
See page
No microphone sound
(1) Microphone volume setting is
too low.
(1) Increase the microphone
volume setting.
Page E-17
(2) Microphone on/off switch is
set to off.
(2) Change the microphone on/off
switch setting to on.
Page E-17
Page E-39
Cannot recall data from a memory
card.
(1) The memory card is not
inserted correctly into the card
slot.
(1) Correctly insert the memory
card into the card slot.
(2) The memory card is damaged.
(3) The data has not been copied
(2) Use a different memory card.
(3) Insert a formatted memory card
into the memory card slot of
your computer, and copy the
data you want to play back into
to
the
memory
card
MUSICDAT folder.
the
directory
named
“MUSICDAT”.
Song play momentarily cuts out
at some points during SMF play.
Data is fragmented.
Perform either of the two following
operations.
• Without deleting the original
(fragmented) data, perform a
“save as” operation to save the
data under a different name.
Next, try performing the
operation using the newly saved
data.
–––
• If you saved the data to the card
from another location, format the
card (which will delete its
contents), and then save the data
to the card again. Next, try
performing the operation using
the newly saved data.
Page E-39
Auto accompaniment chords do
not sound.
The keyboard is in the Song Bank
mode.
Press the RHYTHM button to enter
the rhythm mode, which is
indicated by the rhythm indicator
on the display.
Page E-27
Page E-35
After transferring song data from
my computer, playback stops part
way through.
Digital noise from the USB cable
or power cord caused data
communication between your
computer and keyboard to be
interrupted.
Stop playback, disconnect the USB
cable from and then reconnect it to
the keyboard’s USB port, and then
try playing back the tune again.
If this does not correct the problem,
exit the MIDI software you are
using, and then disconnect the USB
cable from and then reconnect it to
the keyboard’s USB port. Next,
restart your MIDI software and try
playback again.
A tone’s quality and volume
This is an unavoidable result of the digital sampling process,* and does not indicate
malfunction.
sounds
slightly
different
depending where it is played on
the keyboard.
* Multiple digital samples are taken for the low range, middle range, and high range of
the original musical instrument. Because of this, there may be a very slight difference
in tonal quality and volume between sample ranges.
E-44
663A-E-046A
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model:
LK-200S
Keyboard:
61 standard-size keys, 5 octaves
Key Light System:
Tones:
Can be turned on and off (up to 10 keys can be lit at the same time)
264 (128 panel tones + 128 General MIDI tones + 8 drum sets)
Reverb (4 types), Chorus (4 types)
Digital Effects:
Polyphony:
32 notes maximum (16 for certain tones)
Auto Accompaniment
Rhythm Patterns:
Chords:
120
2 fingering methods (CASIO CHORD, FINGERED)
START/STOP, INTRO, NORMAL/FILL-IN, VARIATION/FILL-IN,
SYNCHRO/ENDING
Rhythm Controller:
Accomp Volume:
0 to 127 (128 steps)
3-step Lesson:
Playback:
3 lessons (Step 1, 2, 3)
Repeat play of a single tune
Left hand, right hand, both hands
Scoring
Lesson Part:
Evaluation Mode:
Voice Fingering Guide:
On/Off
Song Bank, Piano Bank
Number of Tunes:
Controllers:
100 (Song Bank: 65, Piano Bank: 35)
PLAY/STOP, PAUSE, FF, REW, REPEAT
User Songs:
Number of Songs: Up to 10 download songs
Capacity: Approximately 320 KB*
* Calculated based on 1 KB = 1024 bytes.
Metronome:
On/Off
0, 2 to 6
Beat Specification:
Other Functions
Tempo:
Variable (226 steps, = 30 to 255)
Transpose:
Tuning:
25 steps (–12 semitones to +12 semitones)
101 steps (A4 = approximatery 440Hz 50Cents)
Card
Supported Memory Cards:
SD memory cards, optional CASIO song data cards*
* May not be available in some geographic areas.
Supported SD Cards:
Maximum Number of
Importable Songs:
Supported Data:
1 GB or less (Cards with capacity greater than 1 GB are not supported.)
Up to 1,000
SMF Format 0, CASIO Original Format CM2
Terminals
SUSTAIN/ASSIGNABLE JACK:
PHONES/OUTPUT Jack:
Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Stereo standard jack
Output Impedance: 78Ω
Output Voltage: 4.5V (RMS) MAX
Standard jack (with microphone volume knob)
Input impedance: 2KΩ
Microphone In:
Input sensitivity: 10mV
USB port
SD CARD SLOT
Power Jack:
9V DC
663A-E-047A
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply:
2-way
Batteries:
6 AA-size batteries
Battery Life:
Approximately 1 hour continuous operation on manganese batteries
Approximately 4 hours continuous operation on alkaline batteries
AD-5
AC Adaptor:
Auto Power Off:
Turns power off approximately 6 minutes after last key operation. Enabled under
batter power only, can be disabled manually.
Speaker Output:
Power Consumption:
Dimensions:
2.0W + 2.0W
9V
94.5 × 37.3 × 13.5 cm (37 1/4 × 14 11
Approximately 4.7kg (10.4 lbs)(without batteries)
7.7W
/
16 × 5 5/16 inch)
Weight:
• Design and specifications are subject to change without notice.
Care of your keyboard
Avoid heat, humidity or direct sunlight.
Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in any extremely hot place.
Do not use lacquer, thinner or similar chemicals for cleaning.
Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent. Soak the cloth in the solution
and squeeze until it is almost dry.
Avoid use in areas subjected to temperature extremes.
Extremely high or low temperature can cause figures on the LCD screen to become dim and difficult to read. This condition
should correct itself when the keyboard is brought back to normal temperature.
NOTE
• You may notice lines in the finish of the case of this keyboard. These lines are a result of the molding process used to shape
the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern.
E-46
663A-E-048A
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
ab
ab
one
T
L
663A-E-097A
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
A
N
N
A-2
663A-E-098A
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
ꢁ
ꢁ
=
A
440Hz
ꢁ
ꢁ
ꢁ
ꢂ
ꢁ
ꢁ
ꢃ
ꢁ
ꢁ
Range Type/
Tipo de gama
-
C 1
C0
C1
C2
C3
C4
C5
C6
C7 G7 C8
C9 G9
A
(Standard type)
(Tipo estándar)
B
“020 GLOCKENSPIEL”/
“095 PICCOLO”
“020 GLOCKENSPIEL”/
“095 PICCOLO”
C
Low pitch
instruments
Instrumentos de
altura tonal baja
D
No scale for tones.
Sin escala para los sonidos.
(Sound Effect)
(Efecto de sonido)
........Keyboard range
........Gama del teclado
a
b
........Available range (using transpose or a message receive)
........Gama disponible (usando la transposición o recepción de mensaje)
663A-E-099A
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
A
N
N
a
í
n
ó
Ass
D
A-4
663A-E-100A
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
F
Cuad
663A-E-101A
A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Rhythm List/Lista de ritmos
POPS I
ROCK I
EUROPEAN
VARIOUS II
000
001
002
003
004
005
006
007
POP 1
WORLD POP
8 BEAT POP
SOUL BALLAD 1
POP SHUFFLE 1
8 BEAT DANCE
POP BALLAD 1
POP BALLAD 2
030
031
032
033
034
035
036
037
038
039
POP ROCK 1
060 POLKA
090
091
092
093
094
095
096
097
098
099
FOLKLORE
JIVE
POP ROCK 2
POP ROCK 3
FOLKIE POP
POP SHUFFLE 2
ROCK BALLAD
SOFT ROCK
ROCK 1
061
062
063
064
065
066
067
POP POLKA
MARCH 1
MARCH 2
WALTZ 1
SLOW WALTZ
VIENNESE WALTZ
FRENCH WALTZ
FAST GOSPEL
SLOW GOSPEL
SIRTAKI
HAWAIIAN
ADANI
BALADI
ENKA
STR QUARTET
008 BALLAD
009
ROCK 2
HEAVY METAL
068 SERENADE
069 TANGO
FUSION SHUFFLE
POPS II
ROCK II
LATIN I
FOR PIANO I
010
011
012
013
014
015
016
017
018
SOUL BALLAD 2
040
041
042
043
044
045
046
047
048
049
JAZZ
050
051
052
053
054
055
056
057
058
059
60'S SOUL
070 BOSSA NOVA 1
071 BOSSA NOVA 2
100
101
102
103
104
105
106
107
108
109
PIANO BALLAD 1
16 BEAT 1
16 BEAT 2
8 BEAT 1
8 BEAT 2
8 BEAT 3
DANCE POP 1
POP FUSION
POP 2
60'S ROCK
SLOW ROCK
SHUFFLE ROCK
50'S ROCK
BLUES
NEW ORLNS R&R
TWIST
R&B
PIANO BALLAD 2
PIANO BALLAD 3
EP BALLAD 1
072
073
SAMBA 1
SAMBA 2
074 MAMBO
075 RHUMBA
076 CHA-CHA-CHA
077 MERENGUE
078 BOLERO
079 SALSA
EP BALLAD 2
BLUES BALLAD
MELLOW JAZZ
JAZZ COMBO 2
RAGTIME
019 POP WALTZ
DANCE/FUNK
020 DANCE
021
022
023
024
025
026 TECHNO
027 TRANCE
028 HIP-HOP
029 FUNK
ROCK WALTZ
BOOGIE-WOOGIE
LATIN II/VARIOUS I
FOR PIANO II
BIG BAND 1
BIG BAND 2
BIG BAND 3
SWING
SLOW SWING
FOX TROT
JAZZ COMBO 1
JAZZ VOICE
ACID JAZZ
JAZZ WALTZ
080
REGGAE
110
111
112
113
114
115
116
117
118
119
ARPEGGIO 1
DISCO 1
DISCO 2
EURO BEAT
DANCE POP 2
GROOVE SOUL
081 PUNTA
082 CUMBIA
ARPEGGIO 2
ARPEGGIO 3
PIANO BALLAD 4
6/8 MARCH
MARCH 3
2 BEAT
WALTZ 2
WALTZ 3
WALTZ 4
083
PASODOBLE
084 SKA
085 BLUEGRASS
086 DIXIE
087 TEX-MEX
088
089
COUNTRY 1
COUNTRY 2
NOTE
• Rhythms 110 through 119 consist of chord accompaniments only, without any drums or other percussion instruments. These
rhythms do not sound unless CASIO CHORD or FINGERED is selected as the accompaniment mode. With such rhythms,
make sure that CASIO CHORD or FINGERED is selected before you try playing chords.
NOTA
• Los ritmos 110 al 119 consisten solamente de acompañamientos de acordes, sin ninguna batería ni otros instrumentos de
percusión. Estos ritmos no suenan a menos que CASIO CHORD o FINGERED sean seleccionados como el modo de
acompañamiento. Con tales ritmos, asegúrese de que se selecciona CASIO CHORD o FINGERED, antes de tratar de
ejecutar los acordes.
A-6
663A-E-102A
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Song
663A-E-103A
A-7
Download from Www.Somanuals.com. All Manuals Search And Download.
663A-E-106A
Download from Www.Somanuals.com. All Manuals Search And Download.
663A-E-107A
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
C
MA0603-A Printed in China
LK200ES1A
Download from Www.Somanuals.com. All Manuals Search And Download.
|