CkJEGFSISwRPoTrDPlFiCzNrChK
Dual Projection System
Dual Projection System
ꢀ
必ず本システムに付属の「YA-S10セットアップガイド」の注意事項をお読みになって
からご使用ください。
日本語
セットアップガイド
XJ-SK600
ꢀ
この説明書は、お読みになった後も大切に保管してください。
本書の最新版は左記ウェブサイトに公開されております。
ꢀ
ꢀ
Be sure to read the precautions in the “YA-S10 Setup Guide” that comes with the
Dual Projection System.
Be sure to keep all user documentation handy for future reference.
To obtain the latest version of this manual visit the website at the URL to the left.
English
Setup Guide
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Lesen Sie unbedingt die wichtigen Hinweise und Vorsichtsmaßregeln in der zum
Dualprojektionssystem mitgelieferten „YA-S10 Setup-Anleitung”.
Bitte bewahren Sie die gesamte Benutzerdokumentation für späteres
Nachschlagen auf.
Für die neueste Ausgabe dieser Bedienungsanleitung besuchen Sie bitte unsere
Website unter der links angegebenen URL.
Deutsch
Setup-Anleitung
ꢀ
Veuillez lire les précautions dans le « Guide d’installation de la YA-S10 » fourni
avec le Système de projection double.
Conservez la documentation à portée de main pour toute référence future.
Pour obtenir la toute dernière version de ce manuel, consultez le site à l’adresse
indiquée à gauche.
Français
Guide d’installation
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Asegúrese de leer las precauciones en la “Guía de configuración de YA-S10”
suministrada con el Sistema de proyección dual.
Asegúrese de tener a mano toda la documentación del usuario para futuras
consultas.
Para obtener la versión más reciente de este manual, visite nuestro sitio web en la
URL a la izquierda.
Español
Guía de configuración
ꢀ
ꢀ
ꢀ
Assicurarsi di leggere le avvertenze riportate nella “Guida di setup di YA-S10”
fornita in dotazione con il Sistema di proiezione duplice.
Conservare l’intera documentazione dell’utente a portata di mano per riferimenti
futuri.
Per ottenere la versione più aggiornata di questo manuale, visitare il sito web
all’URL riportato alla sinistra.
Italiano
Guida di setup
ꢀ
Se noga till att läsa säkerhetsföreskrifterna i ”YA-S10 Installationshandbok” som
medföljer projektorn för dubbelprojektion.
Förvara all användardokumentation nära till hands för framtida referens.
Den senaste versionen av denna installationshandbok kan hämtas från
webbplatsen med den URL-adress som anges till vänster.
Svenska
Installationshandbok
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Certifique-se de ler as precauções no “Guia de Configuração da YA-S10” que vem
com o Sistema de Projeção Dual.
Português
Guia de Configuração
Certifique-se de guardar toda a documentação do usuário à mão para futuras
referências.
この装置は、クラスＢ情
報技術装置です。この装
置は、家庭環境で使用す
ることを目的としてい
ますが、この装置がラジ
オやテレビジョン受信
機に近接して使用され
ると、受信障害を引き起
こすことがあります。取
扱説明書に従って正し
い取り扱いをしてくだ
さい。VCCI-B
Para obter a última versão deste manual, visite o site no endereço URL à esquerda.
ꢀ
U moet de voorzorgen lezen in de “YA-S10 Instelgids” die wordt meegeleverd met
het Tweevoudig projectiesysteem.
Bewaar alle documentatie op een veilige plaats voor latere naslag.
Bezoek de hier links vermelde website om de nieuwste versie van de handleiding
te verkrijgen.
Nederlands
Instelgids
ꢀ
ꢀ
ꢀ
Lue kaksoisprojisointijärjestelmän mukana toimitetun YA-S10-laitteen
Asetusoppaan varoitukset.
Muista pitää kaikki käyttöä koskevat asiakirjat lähettyvillä tulevaa tarvetta varten.
Saat uusimman version tästä oppaasta vasemmalla olevasta Internet-osoitteesta.
Suomi
Asetusopas
ꢀ
ꢀ
この装置は、高調波電流
規格JIS C 61000-3-2
に適合しています。
ꢀ
Pass på å lese forholdsreglene i “Oppsettguide YA-S10” som følger med det doble
projeksjonssystemet.
Pass på å oppbevare all brukerdokumentasjon lett tilgjenglig for fremtidig bruk.
For å få den nyeste utgaven av denne bruksanvisningen, besøk nettsiden ved bruk
av URL-en til venstre.
Norsk
Oppsettguide
ꢀ
ꢀ
MA1303-A
Download from Www.Somanuals.com. All Manuals Search And Download.
XJ-SK600 Overview
The XJ-SK600 Projector System uses a Control Box to sync two projectors so their output looks and
acts as if it is coming from a single projector. A powerful collection of projected image shaping functions,
enables clear image projection not only onto a flat screen, but also onto curved and irregular surfaces.
Important!
z After the Projector System has been installed and adjusted, do not alter the cabinet position or
positions of the projectors inside the cabinet, the projector zoom ring settings, or the screen
position.
Any changes to the above will require re-adjustment of the Projector System.
z When installing the Projector System or when adjusting the cabinet, take care to avoid getting
your hands pinched under the cabinet or by door in the back of the cabinet.
Unpacking
Before getting into setup of the Projector System, take a few moments to make sure that all of the items
listed below are included.
z XJ-SK600 Setup Guide (This manual)
z Cabinet*1
z Feet ×4 (for placement on a flat surface)
z Control Box (YA-S10)*1
z Projectors (XJ-M250) ×2*1
z Control Box remote controller (YT-200)
z Control Box AC adapter and power cord
z Projector remote controller (YT-120)
z Projector power cords ×2
z Remote controller batteries (AAA-size, test use) ×4
z HDMI cables ×2
z RS-232C cables ×2
z Mini D-Sub Cable
z DATA PROJECTOR CD-ROM (Contains projector User’s Guide)*2
z DATA PROJECTOR Setup Guide
z DATA PROJECTOR “Read this first” Sheet
z Warranty Certificate
*1 The Control Box and two projectors are installed in the cabinet at the factory.
*2 Some XJ-SK600 models do not come with a CD-ROM. If your projector does not come with a
CD-ROM, download the User’s Guide from the CASIO projector website. See “User
Documentation” (page E-1) for more information.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Installation Location
The Projector System can be placed on a flat surface or it can be ceiling mounted.
Placing the Projector System on a Flat Surface
When placing the Projector System on a flat
surface, you need to install the four feet on the
bottom of the cabinet.
Screw each of the feet into the holes at the
corners on the bottom of the cabinet.
After attaching the feet to the cabinet, place the cabinet onto a table, desk, or stand or other level and
firm surface, making sure you allow enough space around it. The nearby illustration shows how the
Projector System should be oriented relative to the screen to achieve optimum projection.
For information about the relationship between the
distance between the projectors and the screen and the
size of the projected image, see “Projection Distance
and Screen Size” in the projector User’s Guide. For
information about the User’s Guide, see “User
Screen
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Location Precautions
z Use a conveniently located power outlet that you can
reach easily when you need to unplug the power cord.
z Make sure there is nothing inside the area (within 30 cm
(11.8 inches) of the Projector System) indicated by the
nearby illustration. Take particular care to ensure that
there is nothing blocking the flow of air from the
projector exhaust vents.
Projector
30cm (11.8")
Intake vents
Cabinet
z Airflow from air conditioning equipment redirecting heat
being exhausted from the area around a projector lens
can cause heat ripples to appear in the projected
image. If this happens, adjust the airflow of the air
conditioning equipment or move the Projector System.
Exhaust vents
30cm (11.8")
30cm (11.8")
30cm (11.8")
Airflow vents
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Ceiling Installation
The Projector System can be hung from a ceiling. The Projector System can be ceiling mounted in an
inverse (upside down) configuration or a vertical configuration.
Important!
z To protect against sudden accidental dropping of the Projector System from a ceiling mount
configuration, be sure to secure the cabinet to ceiling fixtures with wires or some other
adequate means.
z When ceiling mounting in a vertical configuration, make sure there is enough work space to
allow access to the fixing screws (two locations marked <A> in the illustration) on the ceiling
side of the cabinet. These screws will need to be loosened and tightened during later
adjustment work.
Inverse Installation
Vertical Installation
Use four M4 screws to fasten the bottom of the
cabinet to the ceiling mount bracket.
Use four M4 screws to fasten the left side of the
cabinet to the ceiling mount bracket.
M4 screws
M4 screws
M4 screw installation positions
<A>
Contact your original retailer for full details about ceiling mounting.
Important!
z When hanging the Projector System from a ceiling, make sure that it is at least one meter away
from fire detectors, fire alarms, and other fire protection devices. Locating the Projector System
too close to a fire protection device creates the risk of mis-operation of the device due to warm
air exhausted from the Projector System. Also, avoid locating the Projector System close to
fluorescent lights or other strong light sources. Bright light can shorten the operating range of
the remote controller or even make remote control impossible. When selecting a location for
the Projector System, be sure to test for proper operation of the remote controller.
z The vertical and horizontal orientation of the projected image is reversed from the normal
configuration when projecting from a Projector System hung from the ceiling. You need to
change the setup of the Projector System in order to correct for this. For more information, see
“Configuring the Initial Settings of the Two Projectors” (page E-8) in this manual.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Wiring
Wire the Control Box and two projectors inside the Cabinet as shown in the illustration below.
Projector A
(Side nearest the Control Box)
Ferrite core
Control Box side
Use the supplied
Use a supplied RS-232C
cable to connect.
power cord to plug
into an outlet.
Use a supplied HDMI
cable to connect.
Projector B
(Side furthest from the Control Box)
When connecting the Control Box to a projector using a supplied HDMI cable, connect the plug of the
cable that is nearest the ferrite core to the HDMI port of the Control Box.
Control Box back
*1
*2
Connect the supplied AC adapter and
plug it into a power outlet.
Use a commercially available HDMI cable to
connect to the HDMI output port of an
image source device.
Connect to the RGB output terminal (using the
included D-sub mini cable or a commercially
available cable) or the component output
terminal (using a commercially available cable)
of the image source device.
*1 To control the Projector System from an external device over a LAN, use a commercially available
LAN cable to connect this terminal to the LAN terminal of the external device.
*2 To control the Projector System from an external device over an RS-232C connection, use a
commercially available serial cable (cross) to connect this port to the serial port of the external
device.
NOTE
z The HDMI cables and RS-232C cables that connect the Control Box to the projectors can be stored in
Storage Box (A) when they are unneeded. The Control Box AC adapter can be stored in Storage Box
(B). See page E-15 of this manual for an illustration that shows the locations of Storage Box (A) and
Storage Box (B).
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Preparing the Remote Controllers
Load two AAA-size alkaline batteries into each of the remote controllers: one YT-200 Control Box remote
controller, one YT-120 projector remote controller. Batteries are provided with the Projector System.
To load batteries: Open the battery cover on the back of a remote controller. Load the batteries making
sure their poles (+/–) are facing in the correct directions. Finally, replace the battery cover.
Important!
z To avoid running down the battery, store the remote control unit so its keys are not pressed
inadvertently.
z When batteries go dead, remove them as soon as possible and replace them with two new
AAA-size alkaline batteries.
Configuring the Initial Settings of the Two Projectors
The initial settings of each projector need to be configured individually.
z Perform the procedure below after placing the Projector System in the location where it will be used,
after connecting cables, and after preparing the remote controllers.
z For information about which projector is Projector A and which one is Projector B, see “Wiring” (page
E-7).
Perform the operations below using the projector remote controller (YT-120). Note that these
operations cannot be performed using the Control Box remote controller (YT-200).
To configuring the initial settings of the two projectors
1. Unplug the power cord of Projector B from the power outlet so only Projector A is
plugged in.
2. Remove the Projector A lens cover.
3. On the remote controller, press the [P] (Power) key to turn on Projector A.
4. After projection starts, use the Projector A focus ring to focus the projected image.
5. On the “Language” screen that appears, select the display language you want to
use.
6. On the remote controller, press the [INPUT] key. On the “Input” dialog box that
appears, select “HDMI” and then press the [ENTER] key.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
7. On the remote controller, press the [MENU] key to display the setup menu, and then
configure the settings below in the indicated sequence.
Setting Item
Auto Keystone Correction
Setting
(1) Option Settings 1
Off
0
3
(2) Screen Settings
(3) Screen Settings
Keystone Correction
No Signal Screen
3
3
Black
Off
Off
(4) Input Settings
Signal Name Indicator
3
(5) Option Settings 1
Auto Power Off
3
z If the Projector System will be used in an inverted ceiling mount configuration, select “On” for the
“Screen Settings Ceiling Mount” setting.
3
z If the Projector System will be used in a rear projection (projecting from behind the screen)
configuration, select “Rear” for the “Screen Settings Projection Mode” setting.
3
z If the Projector System will be used in a location at an elevation of 1,500 to 2,000 meters, select
“On” for the “Option Settings 2 High Altitude” setting.
3
8. Press the [P] (Power) key twice to turn off Projector A.
9. Unplug the power cord of Projector A from the power outlet and plug in Projector B.
10. Repeat the above steps 2 through 8 on Projector B.
11. Plug the power cord of Projector A into the power outlet.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Configuring Initial Control Box Settings
After you finish configuring the initial settings of the two projectors, perform the procedure below to
configure initial Control Box settings.
Perform the operations below using the Control Box remote controller (YT-200). Note that these
operations cannot be performed using the projector remote controller (YT-120).
To configure initial Control Box settings
1. Press the remote controller [ALL] key (or [1] key) to turn on Control Box power.
z This also turns on the two projectors linked to the Control Box.
2. On the remote controller, press the [MENU] key to display the setup menu.
z Under initial default settings, menus are displayed in English.
3. Select “Option Settings” and then “Language”, and then use the [U] and [I] keys to
select the language you want.
4. Configure the settings below as required. For details about each setting, refer to the
“YA-S10 User’s Guide”.
z Option Settings
z Image Properties
z Option Settings
Eco Mode
3
Color Mode
3
Remote Power Numbers
3
Control Box Power On/Off
The Control Box remote controller has five power keys. Four of them are numbered from [1] to [4], and
the fifth one is marked [ALL]. This allows power on/off control of multiple Control Boxes in the same
location.
z Pressing the [ALL] key turns on all of the Control Boxes.
z Keys [1] through [4] control the Control Boxes that are assigned the corresponding number with the
“Option Settings
Remote Power Numbers” setting.
3
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
Adjusting the Positions of the Two Projectors
Use the procedure in this section to adjust the projected images of the two projectors so they are
approximately the same size and at the same position on the target screen (the screen, wall, or other
surface to be used as the projection surface after setup of the Projector System is complete).
z After you finish configuring the initial settings of the Control Box, perform the procedure below.
z For information about which projector is Projector A and which one is Projector B, see “Wiring” (page
E-7).
Perform the operations below using the Control Box remote controller (YT-200). Note that these
operations cannot be performed using the projector remote controller (YT-120).
To adjust the positions of the two projectors
Adjustment 1: Rough alignment of the two projection screens
Projector A image
Target screen
3
Target screen
Projector B image
Before adjustment
After adjustment
2. Attach the lens cover to the lens of Projector B only so only the Projector A image is
being projected on the projection screen.
3. Perform the steps below to adjust the position and size of the Projector A image so
it slightly runs off the edges of the target screen, as shown in the “After adjustment”
image above.
(1) Move the cabinet to change its orientation.
(2) Adjust the zoom ring of Projector A.
4. Remove the lens cover from the lens of Projector B so its image is projected.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
5. Perform the steps below to adjust the position and size of the Projector B image so
it slightly runs off the edges of the target screen, as shown in the “After adjustment”
image above.
(1) Adjust the zoom ring of Projector B.
(2) Loosen the five screws that secure the cabinet side panels, and then rotate the adjuster knob to
adjust the orientation.
z Take care simply to loosen the five screws. Do not remove them.
Fixing screws
Adjuster knob
Fixing screws
z After adjusting the position, re-tighten the fixing screws. Note that you will need to make fine
adjustments later in this procedure, so do not fully tighten the fixing screws at this point.
6. With both the Projector A and Projector B images being projected, repeat steps 3
and 5 as required to minimize the difference between the shape of the Projector A
and Projector B images.
Adjustment 2: Fine adjustment using the adjustment pattern
3
Before adjustment
After adjustment
7. On the Control Box remote controller, press the [CORRECT] key.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
8. On the “Image Shaping” menu that appears, select “Adjust Image Position” and
then press the [ENTER] key.
z This will project two adjustment patterns, a yellow one for Projector A and a light blue one for
Projector B.
z Use the focus rings of Projector A and Projector B to adjust the focus of the patterns as required.
Important!
z All of the explanations in this manual assume that Projector A is connected by HDMI cable to
OUTPUT A of the Control Box and that Projector B is connected to OUTPUT B, as shown under
“Wiring” (page E-7). Reversing these connections will cause the adjustment pattern colors to be
reversed (light blue for Projector A, yellow for Projector B).
9. Observe the adjustment patterns as you adjust Projector A and then Projector B.
Try to achieve the characteristics described below as you make adjustments.
z Adjust so the horizontal crosshairs of the adjustment patterns are horizontal.
z Adjust so the vertical lines of the adjustment pattern crosshairs are in the center of the screen.
Projector A : Use the same procedure as that in step 3 to fine tune the adjustment of the
Projector A adjustment pattern.
Projector B : Use the same procedure as that in step 5 to fine tune the adjustment of the
Projector B adjustment pattern.
10. On the Control Box remote controller, press the [BLANK] key.
z This will cause the Projector B adjustment pattern to disappear, leaving only the Projector A
adjustment pattern (yellow).
11. While observing the Projector A adjustment pattern, perform the vertical
adjustments described below.
z Adjust the vertical orientation of the cabinet.
z Adjust the zoom ring of Projector A.
The crosshairs of the adjustment pattern should be in the center
of the target screen and the outer border of the adjustment
pattern should be just outside of target projection area, as
shown in the nearby figure.
12. Press the remote controller’s [BLANK] key.
z This will project from Projector B again so the adjustment patterns of both Projector A and
Projector B are being projected.
13. Perform the steps below to get the adjustment pattern of Projector B as closely
aligned as possible with the Projector A adjustment pattern.
(1) Adjust the zoom ring of Projector B.
(2) Loosen the five screws that secure the cabinet side panels (see the illustration under step 5,
above), and then rotate the adjuster knob to adjust the orientation.
z Take care simply to loosen the five screws. Do not remove them.
(3) After position adjustment is complete, fully tighten the screws.
14. After the adjustment is the way you want, press the [ESC] key.
z This will cause the Projector A and Projector B adjustment patterns to disappear, and project the
“Image Shaping” menu.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready
15. Next, perform the procedure in the separate YA-S10 Setup Guide under “Shaping
the Image to Match the Projection Screen”.
Important!
z During the adjustment procedures from this point onwards, do not alter the cabinet position or
positions of the projectors inside the cabinet, the zoom ring setting, the focus ring setting, or
the screen position. If any one of these is altered, return to step 2 of the procedure and perform
the other steps again.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
Model Name
Brightness
XJ-SK600
Approximately 6000 lumens
Environment
Operating temperature: 5 to 35°C
Operating humidity: 20 to 80% (non-condensation)
Operating altitude: 0 to 2,000 meters above sea level
Power Requirements
Power Consumption
Weight
Projector: 100VAC - 240VAC, 50/60Hz
Control Box: AC adapter (100VAC - 240VAC, 50/60Hz)
Each Projector: 190W (Eco Mode: Off (Bright))
Control Box: 10W
Approximately 18.3kg (40.3lbs) (Not including accessories)
Approximate Dimensions
(Excluding Projections)
W: 346mm (13.6")
Storage Box (B)*
Storage Box (A)*
D: 373mm (14.7")
Specifications are subject to change without notice.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
z
z
z
z
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Proper connectors must be used for connection to host computer and/or peripherals in order to meet
FCC emission limits.
Declaration of Conformity
Model Number: XJ-SK600
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FOR CALIFORNIA USA ONLY
Perchlorate Material – special handling may apply.
CAN ICES-3(B)/NMB-3(B)
Download from Www.Somanuals.com. All Manuals Search And Download.
Batterij niet weggooien,
maar inlevern als KCA
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Imprimé en Chine
MA1303-A
RJA528115-001
Download from Www.Somanuals.com. All Manuals Search And Download.
|