Casio Electronic Keyboard PX5S ES 1B User Manual

PX 5S

(

)

USER’S GUIDE Basics

(

)

GUÍA DEL USUARIO Conceptos básicos

Please keep all information for future reference.

Guarde toda información para tener como referencia futura.

● You can download a separate tutorial manual from

the CASIO website below.

http://world.casio.com/

● El manual Tutorial por separado puede descargarse

del siguiente sitio web de CASIO.

http://world.casio.com/

Safety Precautions

Before trying to use the Digital Piano, be sure to

read the separate “Safety Precautions”.

Precauciones de seguridad

Antes de intentar usar el piano digital, asegúrese de

leer las “Precauciones de seguridad” separadas.

PX5S-ES-1B

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

General Guide...........................E-2

Using the Stage Setups .........E-26

Saving Settings and Using Panel Lock....................... E-4

Overview ...................................................................E-26

Recalling a Stage Setup............................................E-26

Returning the Digital Piano to Its

Factory Default Settings ............................................. E-4

Separate Tutorial Manual ........................................... E-4

Other Useful Functions..........E-27

System Settings ........................................................E-27

Deleting Data ............................................................E-28

Power Outlet .............................E-5

Using an AC Adaptor.................................................. E-5

Using Batteries ........................................................... E-5

Turning Power On or Off............................................. E-6

USB Flash Drive .....................E-29

Storing Standard Audio Data (WAV Files)

to a USB Flash Drive.................................................E-30

Connecting a USB Flash Drive to and

Detaching It from the Digital Piano............................E-30

Formatting a USB Flash Drive ..................................E-31

Saving Digital Piano Data to a USB Flash Drive.......E-32

Connections..............................E-7

Connecting Headphones ............................................ E-7

Connecting a Pedal .................................................... E-7

Connecting Audio Equipment or an Amplifier............. E-8

Bundled and Optional Accessories............................. E-8

Loading Data from a USB Flash Drive to

Digital Piano Memory................................................E-32

Deleting Data from a USB Flash Drive......................E-33

Renaming a USB Flash Drive File ............................E-33

Playing Back Audio Data Stored on

a USB Flash Drive.....................................................E-34

Playing Back a MIDI File Stored on

Operations Common to

All Modes ..................................E-9

Changing a Number or a Value .................................. E-9

Inputting Text Characters ......................................... E-10

Saving Data .............................................................. E-11

Starting and Stopping Playback................................ E-11

Starting and Stopping Recording.............................. E-12

Using the Editing Function........................................ E-13

Meanings of Symbols Next to Numbers ................... E-13

a USB Flash Drive.....................................................E-34

Error Messages.........................................................E-35

Connecting to a Computer ....E-36

Minimum Computer System Requirements ..............E-36

Connecting the Digital Piano to Your Computer .......E-36

Saving and Loading Digital Piano Data

to a Computer and Editing Digital Piano Data

on a Computer ..........................................................E-37

Using Built-in Tones ..............E-14

Selecting a Tone....................................................... E-14

Editing a Tone........................................................... E-14

Using the Bender Wheel........................................... E-15

Reference................................E-38

Modifying Notes with the Modulation Wheel,

Knobs and Sliders..................................................... E-15

Troubleshooting ........................................................E-38

Product Specifications...............................................E-39

Operating Precautions ..............................................E-40

Playing Demo Songs..............E-16

Sounding Arpeggios

Automatically..........................E-17

To use the Arpeggio Function................................... E-17

Recording and

Playing Back Phrases............E-18

Recording a New Phrase.......................................... E-18

Listening to a Phrase................................................ E-20

Recording Over Another Phrase (Overdubbing)....... E-21

To save a phrase...................................................... E-21

Creating a Song (Song Sequencer).......................... E-21

Recording Your

Keyboard Play ........................E-23

Recording to a USB Flash Drive............................... E-23

Company and product names used in this

manual may be registered trademarks of others.

E-1

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

bo bp bq br bs bt ck cl

cn co cp cq cr

dl dm dn do dp dq

dr ds dt ek el em

ep eq er

Back

E-2

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

• This manual uses the numbers and names below to refer to buttons and controllers.

–

BENDER wheel

ZONE/PART/STEP/TRACK, / buttons

MODULATION wheel

K1 through K4 knobs

S1 slider

Display

BANK, INITIALIZE button

0, DELETE button

1, INSERT button

2 button

S2 slider

S3 slider

S4 slider

3 button

S5 slider

4 button

S6 slider

EXIT button

P(POWER) button

VOLUME controller

SYS SETTING button

ARPEGGIO button

PIANO button

5, ubutton

6, wbutton

7, qbutton

8, ibutton

9, ENTER button

NUM KEY button

ELEC PIANO button

ORGAN button

–

/NO, /YES buttons

STRINGS/BRASS button

GUITAR/BASS button

SYNTH/VARIOUS button

DRUMS button

EDIT button

WRITE button

AUDIO RECORDER, MEDIA button

USB flash drive port

USB port

HEX LAYER button

EFFECT, SONG button

DSP, REW button

SYSTEM, FF button

MASTER, PAUSE button

PHRASE button

START/STOP button

RECORD button

TEMPO, TAP button

DAMPER/PEDAL1, PEDAL2 jacks

MIDI OUT/THRU, IN terminals

LINE OUT R, L/MONO jacks

DC 12V terminal

LINE IN R, L/MONO jacks

PHONES jacks

AUDIO IN jack

E-3

Download from Www.Somanuals.com. All Manuals Search And Download.

General Guide

Saving Settings and Using

Panel Lock

Your Digital Piano lets you save its current settings,

and lock its buttons to protect against operation errors.

For details, see “Auto Resume” (page E-27) and “Panel

Lock” (page E-27).

Separate Tutorial Manual

You can download a separate tutorial manual from the

CASIO website below.

http://world.casio.com/

Returning the Digital Piano to

Its Factory Default Settings

Perform either of the following two procedures when

you want to return the Digital Piano’s stored data and

settings to their initial factory defaults.

■ Method 1

Hold down the

Digital Piano.

(P) button to turn off the

• For details, see “Turning Power On or Off” (page

E-6).

While holding down the

(4) button and

(P) button.

(NUM KEY), press the

Keep the

(4) and

(NUM KEY) buttons

depressed until the message “INITIALIZING”

appears on the display.

After initialization is complete, display contents return

to normal.

■ Method 2

Press the

Use the

(SYS SETTING) button.

(w) and

(q) buttons to select

“Initialize”.

Use the

(u),

(w),

(q), and

ek el

(i) buttons to select “Initialize All”.

Press the (ENTER) button.

This will display a confirmation message “SURE?”.

• If you want to cancel the initialization, press the

(NO) or

(EXIT) button.

Press the

(YES) button to initialize.

The message “Please Wait” will remain on the display

while the operation is being performed. Do not perform

any operation while this message is on the display.

“Complete” appears on the display after initialization is

complete.

E-4

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Outlet

Your Digital Piano runs on standard household power.

Be sure to turn off power whenever you are not using

the Digital Piano.

Using Batteries

You can use eight AA-size batteries for power.

• Use alkaline batteries.

Never use oxyride or any other nickel based

batteries.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified

polarity plug) that comes with this Digital Piano. Use

of a different type of AC adaptor can cause

malfunction of the Digital Piano.

On the back of the Digital Piano on the right,

loosen the two screws that secure the battery

cover in place.

Specified AC Adaptor: AD-A12150LW

• The screws are designed so they can be loosened

only, and not come completely out.

• Use the supplied power cord to connect the AC

adaptor as shown in the illustration below.

Screws

Household power outlet

Battery cover

Power cord

Slide the battery cover away from you to

remove it.

DC 12V terminal

AC adaptor

• Configuration and type depends

on your geographic location.

Note the following important precautions to avoid

damage to the power cord.

■ During Use

• Never pull on the cord with excessive force.

• Never repeatedly pull on the cord.

• Never twist the cord at the base of the plug or

connector.

Load eight AA-size batteries into the battery

compartment.

• Make sure the positive +and negative -ends of the

batteries are facing as shown in the illustration.

■ During Movement

• Before moving the Digital Piano, be sure to unplug

the AC adaptor from the power outlet.

■ During Storage

Replace the battery cover and slide it towards

you (the reverse of what you did in step 2) to

close it.

• Make sure that the tabs of the battery cover engage

with the tabs of the Digital Piano.

• Loop and bundle the power cord, but never wind it

around the AC adaptor.

IMPORTANT!

• Never connect the AC adaptor (JEITA Standard,

with unified polarity plug) that comes with this Digital

Piano to any other device besides this Digital Piano.

Doing so creates the risk of malfunction.

• Make sure the Digital Piano is turned off before

plugging in or unplugging the AC adaptor.

• The AC adaptor will become warm to the touch after

very long use. This is normal and does not indicate

malfunction.

Tabs

Secure the battery cover by tightening the

two screws you loosened in step 1.

E-5

Download from Www.Somanuals.com. All Manuals Search And Download.

Power Outlet

■ Low Battery Indication

The following shows the approximate battery life.

Approximately 3 hours* (alkaline batteries, using the

optional CASIO CP-16 headphones)

* Using a high volume setting, playing in very low

temperatures, and certain other playing conditions

can shorten battery life.

Low battery power is indicated by the

(EFFECT)

button lamp flashing. Replace the batteries with new

ones.

Turning Power On or Off

Press the

Piano power.

(P) button to turn on Digital

• Use the Digital Piano’s VOLUME controller ( ) to

adjust the volume.

To turn off the Digital Piano, hold down the

(P) button until the Digital Piano’s display

goes blank.

NOTE

• Pressing the

(P) button to turn off power

actually puts the Digital Piano into a standby state.

Minute amounts of current continue to flow within

the Digital Piano in the standby state. If you do not

plan to use the Digital Piano for a long time or if

there is a lightning storm in your area, be sure to

unplug the AC adaptor from the power outlet.

Auto Power Off

The Digital Piano turns off automatically to avoid

wasting power if no operation is performed for a preset

amount of time. The Auto Power Off trigger time is

about six minutes under battery power and about four

hours under AC adaptor power.

• You can disable Auto Power Off by turning off the

“Auto Power Off” setting as described under

“System Settings” (page E-27).

E-6

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting Headphones

Connecting a Pedal

Your Digital Piano has two pedal terminals.

A variety of different functions can be assigned to a

pedal.

• Under initial factory settings, the damper pedal*

function is assigned to DAMPER/PEDAL1.

* Pressing the damper pedal while playing causes

notes you play on the keyboard to be sustained

longer.

IMPORTANT!

• Before connecting headphones, be sure to use the

Digital Piano’s VOLUME controller to turn the

volume down to a low level. After connecting, you

can adjust the volume to the level you want.

Back

PHONES jacks

Whenever a piano tone is selected, pressing this

pedal will activate the Digital Piano’s Damper

Resonance effect, which causes notes to resonate

in the same way they do when the damper pedal

on an acoustic piano is pressed.

Commercially

available headphones

• For details, see the separate “Tutorial”.

Standard plug

To connect to the pedal jack

Depending on the type of operation you want the

pedal (SP-3) to perform, connect the pedal’s cable

either to the Digital Piano’s DAMPER/PEDAL1 jack or

PEDAL2 jack. If you want to use both operations

(jacks) at the same time, you need to purchase another

optionally available pedal.

Connect commercially available headphones to the

PHONES jacks. To protect your hearing, make sure

that you do not set the volume level too high when

using headphones.

NOTE

Back

• Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

DAMPER/PEDAL1, PEDAL2 jacks

• If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

SP-3

E-7

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

To input from audio equipment (Figure

)

Connecting Audio Equipment

or an Amplifier

This Digital Piano outputs notes from its LINE OUT R

(right channel output) and LINE OUT L/MONO (left

channel output). Connect a keyboard amplifier or other

device to direct output to speakers. You can adjust the

LINE OUT volume level with the Digital Piano’s

VOLUME controller.

Connect the Digital Piano’s AUDIO IN terminal to the

audio equipment as shown in Figure . You can also

connect to the LINE IN R and LINE IN L/MONO

terminals. Use commercially available connection cords

that match the equipment being connected to.

Connecting a cord to LINE IN L/MONO only will

cause the left and right channels to be mixed and output

from both LINE OUT R and LINE OUT L/MONO

IMPORTANT!

Bundled and Optional

Accessories

• Whenever connecting something to the Digital

Piano, first use the VOLUME controller to set the

volume to a low level. After connecting, you can

adjust the volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Use only accessories that are specified for use with this

Digital Piano.

Use of unauthorized accessories creates the risk of fire,

electric shock, and personal injury.

Guitar amplifier

Keyboard amplifier, etc.

NOTE

• You can get information about accessories that are

sold separately for this product from the CASIO

catalog available from your retailer, and from the

CASIO website at the following URL.

INPUT 1

INPUT 2

Standard plug

Other electronic music

instrument

http://world.casio.com/

CD player, audio player, etc.

Stereo mini plug

Stereo mini jack

Standard jack

Audio amplifier AUX IN jack, etc.

LEFT (White)

RIGHT (Red)

Pin plug

To output to a musical instrument

amplifier (Figure

)

Use a commercially available connecting cord to

connect the amplifier to the Digital Piano’s LINE OUT

L/MONO jack as shown in Figure . Connecting a

cord to LINE OUT L/MONO only will cause the left

and right channels to be mixed and output as mono.

To output to audio equipment (Figure

)

Use commercially available connection cords to

connect as shown in Figure . Normally, you should

set the input selector of the audio equipment to the

terminal where the Digital Piano is connected (AUX

IN, etc.)

E-8

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to All Modes

dl dm dn do dp dq en eo

cq cr cs

dr ds dt ek el em ep eq er

The operations described in this section are common to

all modes and functions.

To input a number with the 10-key pad

Press the

(NUM KEY) button.

This will cause the button’s lamp to light, indicating the

number input mode.

Changing a Number or a Value

Use the operations in this section to specify a number

or to change a value.

Example: To change a tone number

Use buttons

(0) through

(4) and buttons

(5) through

(9) to input the number you

want.

After using buttons

through

(Tone Group) to

specify a group, use one of the methods below to

change the selected tone number. (For details about

selecting tones, see “Using Built-in Tones” on page

E-14.)

To scroll a number sequentially

To return a number to its initial default

setting

Press the

minus (–) or plus (+) button.

• The initial default of a number depends on the

parameter being set.

Press the

the same time.

minus (–) and plus (+) buttons at

To fast scroll a number

NOTE

Hold down the

minus (–) or plus (+) button.

• You can also input numbers and characters using the

Digital Piano’s knobs. For more information, see the

separate “Tutorial”.

To jump in steps of 10

While holding down the

(NUM KEY), press

the

minus (–) or plus (+) button.

E-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to All Modes

You can use either of the methods below to

select a character and input it.

• Method 1

Inputting Text Characters

Use the procedures in this section to input or edit

names.

Example: When creating a new phrase and saving data (For

details, see “Recording and Playing Back Phrases”

on page E-18.)

Press the

minus (–) or plus (+) button to scroll

sequentially through characters and symbols. With

this method, each time you press the minus (–) or

plus (+) buttons at the same time, input jumps to the

first character of a group in the following sequence:

Symbols

case.

• Method 2

Press the

lit.

Next, use the 12 buttons from

as shown in the illustration below. Each press of a

button cycles through the letters assigned to it at the

current cursor location.

Numerals

Upper case

Lower

If you are saving a newly created phrase in Digital

Piano memory, display the Digital Piano’s save menu

(“Saving Data”, page E-11) before trying to input

characters using the procedure below.

• With this method, you select one of the characters

shown below.

(NUM KEY) button so its lamp becomes

dl em

to input letters

After inputting the letters you want, press the

(NUM KEY) button so its lamp becomes unlit.

Symbols (Part 1)

Numerals

ABC

DEF

GHI

JKL

• For information about characters that are supported

when using a USB flash drive, see “Renaming a USB

Flash Drive File” (page E-33).

MNO

PQRS

TUV

WXYZ

(Upper/lower case toggle)

Symbols (Part 2)

Use the

(u),

(w),

(q), and

ek el

(i) buttons to move the cursor to location

NOTE

where you want to input the character.

• You can also input numbers and characters using the

Digital Piano’s knobs. For more information, see the

separate “Tutorial”.

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to All Modes

Saving Data

Use the procedure below to save edited and registered

data to Digital Piano memory.

Starting and Stopping

Playback

Use the procedure below with functions that allow

playback of data.

Press the

(WRITE) button.

Press the button of the function you want to

use the required number of times until the

button lamp is lit.

The button of each function has a lamp. When the lamp

of a function button is lit, it means the function is

standing by for playback.

If the data lets you change its number or data

name, perform the procedure under “Inputting

Text Characters” on page E-10.

• You can also input numbers with the 10-key pad. For

details, see “To input a number with the 10-key pad”

in “Operations Common to All Modes” (page E-9).

• To specify a number, move the cursor to the location

where the number is located.

•

(SONG) button: Song sequencer playback (page

E-21)

(PHRASE) button: Phrase sequencer playback

(page E-18)

(AUDIO RECORDER) button: Audio recorder

playback (page E-23)

Press the

playback.

(START/STOP) button to start

• To specify a name, move the cursor to the first

character of the location where the name is located.

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

Press the

playback.

(START/STOP) button to stop

• If you want to cancel the save operation, press the

(NO) or

(EXIT) button.

Press the

(YES) button.

The message “Please Wait” will remain on the display

while the operation is being performed. Do not perform

any operation while this message is on the display.

“Complete” appears on the display after data save is

complete.

• If there is already data at the location you are saving

the new data or if there is already a file with the same

name you specified, a message “Replace?” will

appear asking if you want to overwrite the existing

data with the new data. Press the

(YES) button to

overwrite or the (NO) button to cancel the save

operation.

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to All Modes

NOTE

Starting and Stopping

Recording

Perform the procedure below with functions that allow

recording of data (phrase sequencer and audio

recorder).

• The following describes button lamp operations that

are common to the song sequencer, phrase

sequencer, and audio recorder functions.

A) Function button lamps:

(SONG) button,

(AUDIO RECORDER)

(PHRASE) button,

button

Unlit: Function disabled.

Flashing: Recording using the function in

standby or in progress.

Lit: Playback using the function in standby or in

In step 1 under “Starting and Stopping

Playback”, press the button of the function

you want to use the required number of times

until the button lamp is flashing.

progress.

This will enter the recording standby state, which is

(RECORD) button lamp

indicated by the

(RECORD) button also flashing.

Unlit: All recording disabled.

Flashing: Recording using the function whose

button is flashing in standby.

Lit: Recording using the function whose button is

flashing in progress.

• The following describes button lamp operations that

are common to the song sequencer, phrase

sequencer, and audio recorder functions when a

button is pressed.

Now, any one of the following will start

recording.

• Pressing the

(RECORD) button

C) Operation when the

pressed.

(START/STOP) button is

• A pedal operation

• A knob operation

• A slider operation

• A wheel operation

When playback is not in progress: Starts

playback of the function whose lamp is lit.

When playback is in progress: Stops playback.

D) Operation (functions that support recording

• Playing something on the keyboard

When recording starts, the

(RECORD) button lamp

will change from flashing to lit. The lamp of the button

of the function you selected will continue flashing.

only) when the

(RECORD) button is pressed.

When the (RECORD) button lamp is flashing

(recording standby): Starts recording with the

function whose lamp is flashing.

Press the

recording.

(RECORD) button to stop

When the

(RECORD) button lamp is lit

This will cause the button’s lamp to go out. The

function you are using will go into playback standby

and the lamp of the function’s button will change from

flashing to lit. This indicates the same status as that

after step 1 is performed under “Starting and Stopping

Playback” on page E-11.

(recording in progress): Stops recording. If

more than one playback operation is in

progress, they are all stopped.

E-12

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to All Modes

Using the Editing Function

Use the procedure below with functions that allow

editing of tones and data. Editing lets you change the

parameters of each editable item.

Press the

This displays the editing screen.

(EDIT) button.

Use the

(u),

(w),

(q), and

ek el

(i) buttons to select the item you want to

edit.

• If “>ENT” is on the display, it means that there are

more items that can be edited in the operation you are

performing. In this case, pressing the

(ENTER)

button will advance to the next editing page.

Change parameters as desired.

• For details about how to change parameters, see

“Changing a Number or a Value” in “Operations

Common to All Modes” (page E-9).

After you finish with your edits, use the

(EXIT) button to exit the editing screen.

• Press the

(EXIT) button the required number of

times to navigate back to the screen that was

displayed when you started editing.

Meanings of Symbols Next to

Numbers

The meanings of the symbols next to numbers after you

record or edit data are explained below.

! : Unsaved data

* : Saved data

• Unsaved data (!) will be discarded if you exit the

editing or recording operation by selecting a

different number. Don’t forget to save data that you

want to retain. See “Saving Data” in “Operations

Common to All Modes” (page E-11) for more

information.

E-13

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Tones

bo bp bq br bs bt ck cl

NOTE

Selecting a Tone

Zones

Your Digital Piano has memory for 720 tones (370

presets and 350 user tones), divided into eight groups.

• For more information about tones (Tone List), see

the separate “Tutorial”.

• To specify a tone for each zone,* use the

(ZONE, –/+) buttons to select a zone number, and

then perform steps 1 through 3 above to change

select a tone.

• The Digital Piano has built-in demonstration tunes

that highlight the different characteristics of tones.

For more information, see “Playing Demo Songs”

(page E-16).

• Press the

(ZONE, –/+) buttons at the same time to

toggle the currently selected zone tone between

muted and unmuted.

* For details about zones, see the separate “Tutorial”.

Use the “Tone List” to look up the group and

the number of the tone you want to select.

Editing a Tone

You can use the procedure below to edit a tone to suit

your needs. You can also use the editing menu to

specify DSP and system effects.

Use the

(tone groups) buttons to

bo cl

select the group you want.

Example: To select the ORGAN group

Lit

Specify the number of the tone you want to

edit.

• For details about how to do this, see “Selecting a

Tone” on page E-14.

Edit the tone as desired.

Specify the number of the tone you want to

use.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

• For details about how to do this, see “Using the

Editing Function” in “Operations Common to All

Modes” (page E-13).

Example: To select “01 Organ3 G”

• The items that appear on the editing screen depend

on the tone you select.

• For details and actual parameters, see the separate

“Tutorial”.

Tone name

Tone number

E-14

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Built-in Tones

Using the Bender Wheel

You can use the bender wheel to slide the pitch of notes

smoothly upwards and downwards. This capability

makes it possible to reproduce saxophone and electric

guitar choking effects.

Adding a Pitch Bend Effect

While playing a note on the

keyboard, rotate the

(BENDER) wheel on the left of the

keyboard upwards or downwards.

The amount the note bends depends on

how much you rotate the pitch bend

wheel.

• Do not have the pitch bend wheel

rotated as you turn on the Digital Piano.

NOTE

• You also can configure pitch bend wheel operation

by specifying the amount of pitch change at

maximum rotation in either direction. For more

information, see the separate “Tutorial”.

Modifying Notes with the

Modulation Wheel, Knobs and

Sliders

You can modify notes even while you are playing. Each

tone is preset with effects that are appropriate for it.

While playing on the keyboard

with your right hand, you can

operate the

(MODULATION)

wheel,

knobs (K1 through K4),

and sliders

(S1) through

(S6).

The amount effect applied depends on

how much the applicable control is

moved.

• Do not have the modulation wheel, knobs, or sliders

in a moved position as you turn on the Digital Piano.

NOTE

• You can change the effects and functions assigned to

the modulation wheel, knobs, and sliders. For more

information, see the separate “Tutorial”.

z For information about other functions related to

“Using Built-in Tones”, see the separate

“Tutorial”.

E-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing Demo Songs

ep eq

While holding down the

(EDIT) button,

press the

(WRITE) button.

This will start sequential playback of the demo songs,

starting from song 1.

Song tempo

Song number

Song name

Current

measure

• You can scroll through songs manually with the

(–, +) buttons.

Press the

This stops demo song playback.

(START/STOP) button.

Playback of the demo songs will continue in an endless

loop until you press the

stop it.

(START/STOP) button to

NOTE

• Only the operations described above can be

performed while demo song playback is in progress.

E-16

Download from Www.Somanuals.com. All Manuals Search And Download.

Sounding Arpeggios Automatically

bm bn

With the Arpeggio Function, you can play various

arpeggios automatically by simply pressing keys on

the keyboard. You can select from a number of

different arpeggio types for playback, including

arpeggios using the notes that make up a chord you

play on the keyboard, arpeggios that also include notes

that are automatically inserted in addition to those that

make up a chord you play on the keyboard, and more.

• The Arpeggio Function has 100 arpeggio type

presets (Arpeggio number 000 to 099). An arpeggio

type preset can be edited and saved as a user

arpeggio type. There is memory for up to 100 user

arpeggio types (Arpeggio number 100 to 199).

• A HOLD function is provided to enable arpeggios to

continue to play even after keyboard keys are

released.

Turn arpeggio hold on or off.

• While holding down the

(SYS SETTING) button,

press the

(ARPEGGIO) button to toggle HOLD

between on and off.

OFF : The arpeggio will play while keyboard keys

are depressed.

ON : The arpeggio will continue to play even after

the keyboard keys are released.

• The

(ARPEGGIO) button lamp flashes while

arpeggio hold (HOLD) is turned on.

Press some keys and the arpeggio will start

to play automatically.

• Press the

(ARPEGGIO) button to toggle arpeggio

between on and off.

• To stop arpeggio HOLD playback, press

(ARPEGGIO) button or change the HOLD function

in step 3 of the above procedure to OFF.

To use the Arpeggio Function

Using the Arpeggio Type Selection

Screen to Select the Recommended Tone

as the Zone Part Tone

Hold down the

the arpeggio type selection screen shown

(ARPEGGIO) button until

below appears on the display.

This will cause the button’s lamp to light.

• For details about zone parts, see the separate

“Tutorial”.

Hold down the

the arpeggio type selection screen appears

(ARPEGGIO) button until

on the display.

Hold down the

lamp starts to flash.

(BANK) button until its

Arpeggio number

Arpeggio name

NOTE

Specify the arpeggio number you want.

• In the case of a user arpeggio, the tone that was

selected as the Zone Part tone when the user data

was saved is the recommended tone.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

z For information about other functions related to

“Sounding Arpeggios Automatically”, see the

separate “Tutorial”.

E-17

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording and Playing Back Phrases

dl dm dn

cm cn co cp cq

cs ct dk

dr ds dt ek el em ep

The Phrase Sequencer is a great way to record musical

phrases that suddenly pop into your mind for later

playback.

• You can record a new phrase or overdub onto an

existing phrase to create a user phrase. There is

memory for storage of up to 1,000 user phrases

(phrase number 000 to 999) for later recall when you

need them.

Recording a New Phrase

• You can record up to approximately 1,600 notes for a

single phrase. Also, recorded wheel, knob, and

slider operations significantly reduce the remaining

number of notes available for recording.

• Note that you cannot record a phrase while an

Audio Recorder (page E-23) operation is in progress.

• In addition to what you play on the keyboard, your

pedal, wheel, knob, and slider operations are also

recorded as part of phrase. Note, however, that

pedal, modulation wheel, knob, and/or slider

operations may not be recorded when certain

functions are assigned to pedals, knobs, and/or

sliders. For more information, see the separate

“Tutorial”.

Press the

(PHRASE) button the required

number of times until its lamp starts to flash.

• You can choose either of two different playback

options: one-time playback (loop off) or repeat

playback (loop on).

• Overdubbing during looped playback is supported.

• A Song Sequencer function lets you combine phrase

data into song data. With this Digital Piano, song

data is referred as a “song”. For details, see

“Creating a Song (Song Sequencer)” (page E-21).

• If OVDB (overdubbing) is displayed as the “Rec

Mode” setting, use the

minus (–) and plus (+)

buttons to change it to NEW (new phrase). This will

enter the new phrase recording standby mode.

• Note quantize and end measure settings can be

configured as required.

■ Note Quantize (Note Qntz)

When recording keyboard play, there may be

cases when your timing strays a bit. The note

quantize settings described below can be used

to correct the timing of keyboard play

automatically and correct the timing of notes

you play on the keyboard. (Note that only key

press timing is correct. The timing of other

operations such as key release, and wheel,

pedal, knob, and slider operations are not

corrected.)

Off

: Timing not adjusted. (Notes are

recorded as played.)

6^,

: Timing of actual keyboard play is

corrected to the nearest note in

accordance with the specified note

unit.

E-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording and Playing Back Phrases

Start recording.

■ Configuring End Measure Settings

• For details about how to do this, see “Starting and

Stopping Recording” in “Operations Common to All

Modes” (page E-12).

• Recording is performed as a Zone 1 stage setup

phrase. For details about zones, see the separate

“Tutorial”.

End Measure settings specify the number of

measures (up to a maximum of 16) in the

phrase. Phrase recording stops automatically

when it reaches the number of measures

specified by the End Measure setting.

Auto

: No number of measures is specified.

The number of measures where

phrase recording was stopped is

applied automatically.

After you finish recording, save the data as

described below.

• For details about how to do this, see “Saving Data” in

“Operations Common to All Modes” (page E-11).

• The message “Memory Full” will appear on the

display when recording is not possible because there

is not enough memory capacity available. If this

happens, record a different phrase that does not take

up so much memory.

1 to 16 : Phrase recording stops when it

reaches the specified number of

measures.

• Pressing the (SYS SETTING) button will display a

menu of the detailed settings shown below. Use the

• For information about deleting data you saved, see

page E-28.

down (w) and

up (q) buttons to select a

parameter and then use the

minus (–) and plus (+)

buttons to change its setting.

■ Saving a Phrase to an External Device

• USB flash drive (page E-32)

• Computer (page E-37)

Setting

Range

Menu Description

Guide Beat Guide tone (Guide

Beat). Specifies

Off, On

whether or not a count

tone is sounded during

phrase recording and/

or record standby.

Precount

Precount (Precount).

Specifies the number

of measures of count.

Off

1:1 measure,

2:2 measures

HighReso/ High-resolution sound Off, On

Off Velo

source (High Reso

Velocity) and off

velocity (Off Velocity).

Turning on this setting

records with both a

high-resolution sound

source and Off

velocity. However, the

maximum number of

measures that can be

recorded is halved

when this option is

turned on.

• Pressing the

(EDIT) button will display a screen

for configuring Guide Beat (click), precount, and End

Measure beat settings.

Use the

(w) and

(q) buttons to select “Beat”,

and then use the

minus (–) and plus (+) buttons to

select a beat within the ranges of 2/4 to 8/4, or 2/8 to

16/8.

E-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording and Playing Back Phrases

Adjust the tempo (beats per minute) value as

desired.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

Listening to a Phrase

Press the

(PHRASE) button.

This displays the phrase selection screen shown below.

• You can also change the tempo value using the

minus (–) and plus (+) buttons.

Phrase number

Phrase name

• You can specify a tempo value in the range of 020 to

255.

Press the

(EXIT) button.

This exits the tempo screen.

■ To adjust the tempo by tapping a beat

Loop setting

Press the

This displays the tempo screen.

(TEMPO) button.

Specify the number of the phrase you want to

hear.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

Tap the

(TAP) button four times at the

speed (tempo) you want to set.

Use the

(w) button to select “Loop”, and

then use the

minus (–) and plus (+)

buttons to turn looping on or off.

OFF : One-time playback

ON : Looped playback

• The tempo setting will change in accordance with

your tapping speed as soon as you tap the fourth

time.

Play the phrase.

• For details about how to do this, see “Starting and

Stopping Playback” in “Operations Common to All

Modes” (page E-11).

• The phrase loop setting is saved as a parameter for

each phrase.

After setting the tempo by tapping, you then

can use the procedure under “To change the

tempo using the TEMPO buttons” (page

E-20) to make fine adjustments.

Changing the tempo setting

Using the Phrase Selection Screen to

Select the Recommended Tone as the

Zone Part 1 Tone

There are two different methods you can use to change

the tempo setting: using the TEMPO buttons or

tapping a beat with a button.

• You can use this procedure to adjust the tempo not

only for phrases, but also for other functions as well.

• For details about zone parts, see the separate

“Tutorial”.

■ To change the tempo using the TEMPO

Press the

(PHRASE) button to display the

buttons

“PHRASE SELECT” screen (page E-20) for

selecting a phrase.

Press the

(TEMPO) button.

• This displays the tempo screen shown below.

Hold down the

lamp starts to flash.

(BANK) button until its

The tone that was selected as the Zone Part 1 tone when

the data was saved is the recommended tone.

E-20

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording and Playing Back Phrases

Recording Over Another

Phrase (Overdubbing)

To save a phrase

For details about how to save data, see “Saving Data”

in “Operations Common to All Modes” (page E-11).

• If there is not enough Digital Piano memory space

available to store the phrase data, the message “not

enough space” will appear on the above display in

place of “Press Enter”, and you will not be able to

save the phrase data. If this happens, delete some of

the data in the Digital Piano’s memory to free up

memory space.

• For information about deleting data you saved, see

page E-28.

• The Digital Piano can store up to 1,000 user phrases

of a combined data volume of 1MB.

Select the phrase you want to overdub.

Press the (PHRASE) button the required

number of times until its lamp starts to flash.

• If NEW (new phrase) is displayed as the “Rec Mode”

setting, use the

minus (–) and plus (+) buttons to

change it to OVDB (overdubbing). This will enter the

overdubbing standby mode.

Start recording.

• For details about how to do this, see “Starting and

Stopping Recording” in “Operations Common to All

Modes” (page E-12).

■ Saving a Phrase to an External Device

• USB flash drive (page E-32)

• Computer (page E-37)

• The original phrase will playback as a loop. Anything

you play on the keyboard and any operations you

perform during loop playback will be overdubbed

onto the original phrase.

Creating a Song

■ To delete the last recorded data (undo)

While phrase playback is in progress or stopped, or

while overdubbing is in progress, hold down the

(RECORD) button until the undo screen “PHRASE :

(Song Sequencer)

The Song Sequencer lets you combine phrase data into

song data. With this Digital Piano, song data is referred

as a “song”.

UNDO” appears.

• You can also use the operation below to perform an

undo operation while the PHRASE SELECT screen

shown under “Listening to a Phrase” (page E-20) is

displayed.

To create a song

Press the

(EDIT) button and then use the

(w)

Press the

side lamp becomes lit.

(SONG) button so the “SONG”

and

(q) buttons to select “Undo”. Finally, press

(ENTER) button.

the

This will display an undo screen. Perform the

procedure from step 3 under “Saving Data” on page

E-11 of the “Operations Common to All Modes”

section.

• The message “PHRASE : Can’t UNDO” will be

appear on the display if you try to perform an undo

operation again after already undoing the last

Specify the song number you want.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

recording. Press the

message.

(EXIT) button to clear the

Press the

(EDIT) button.

E-21

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording and Playing Back Phrases

Use the

(w) and

(q) buttons to select

To play back a song

a song edit item and then press the

Press the

side lamp becomes lit.

(SONG) button so the “SONG”

(ENTER) button.

• If you want to create a new song, select “TRACK

EDIT”. See step 5 of this procedure for information

about how to create a song.

• To adjust the song tempo value, select “Tempo”. For

details about how to change this setting, see

“Changing a Number or a Value” in “Operations

Common to All Modes” (page E-9).

• For information about using “Song Mixer”, see the

separate “Tutorial”.

Specify the song number you want.

Edit the song as required.

• For details about how to change this setting, see

“Changing a Number or a Value” in “Operations

Common to All Modes” (page E-9).

• Use the

minus (–) and plus (+) buttons to select a

track.

• To change the phrase number and other settings, use

the (u), (w), (q), and (i) buttons to

Start playback.

move the underscore (_) to a setting to select it, and

then use the minus (–) and plus (+) buttons to

• For details about how to do this, see “Starting and

Stopping Playback” in “Operations Common to All

Modes” (page E-11).

change the selected setting.

Track

Measure number

• Use the

(REW) button to scroll back measure-by-

measure, or the

(FF) button to scroll forward.

• You can pause playback by pressing the

(PAUSE)

button.

• You can edit a song later, if you want. For

information about how to do this, see “To create a

song” on page E-21.

Sequential number

Phrase number

Repeat

z For information about other functions related to

“Recording and Playing Back Phrases”, see the

separate “Tutorial”.

Note shift

Description

Settings

Number of the phrase to

be used

Phrase number

Ph000 to Ph999

1 to 99

Number of times play of

the phrase is repeated

Repeat

How much notes in the

phrase should be shifted

Note shift

–24 to +24

• To delete part of a phrase, press the

button.

• To insert part of a phrase, press the

(DELETE)

(INSERT)

button.

• The maximum number of tracks is eight.

• The maximum sequential number value is 999.

• Song editing cannot be performed while song

playback is in progress.

After you are finished editing a song, save it.

• For details about how to save data, see “Saving Data”

in “Operations Common to All Modes” (page E-11).

• For information about deleting data you saved, see

page E-28.

■ Saving Songs to an External Device

• USB flash drive (page E-32)

• Computer (page E-37)

E-22

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

cm cn co cp

cr cs

When a commercially available USB flash drive is

inserted in the Digital Piano’s USB flash drive port,

audio data can be recorded to and played back from

the USB flash drive (Audio Recorder).

Recording Digital Piano Play

PREPARATION

• Be sure to format the USB flash drive on the Digital

Piano before using it. See “USB Flash Drive” on page

E-29 for more information.

Recording to a USB Flash

Drive

Insert the USB flash drive into the Digital

Piano’s USB flash drive port.

Anything played on the Digital Piano is recorded to the

USB flash drive as audio data (WAV files*). If you play

along on the Digital Piano as you play back data stored

in the song and phrase sequencer, the memory

playback and your keyboard play are both recorded to

USB flash drive.

• When you plug in a USB flash drive, the Digital Piano

initially needs to “mount” the USB flash drive and

prepare for data exchange. Note that Digital Piano

operations are momentarily disabled while a USB

flash drive mounting sequence is being performed.

While the mounting process is in progress, the

message “Mounting Media” will be displayed on the

display. It may take up to 10 or 20 seconds or even

longer for a USB flash drive to be mounted. Do not

attempt to perform any operation on the Digital

Piano while a mounting sequence is in progress. A

USB flash drive needs to be mounted each time it is

connected to the Digital Piano.

* Linear PCM, 16bit, 44.1 kHz, Stereo

■ Recording Capacity

• 100 files (No. 00 to No. 99)

• Approximately 25 minutes maximum recording per

file

• If you turn on the Digital Piano while USB flash drive

is plugged into the Digital Piano, the mount

operation described above will need to be performed,

and Digital Piano operation will be disabled during

that time.

■ Recorded Data

• Anything played on the Digital Piano is recorded.

• Individual part recording is not supported.

Press the

(AUDIO RECORDER) button

■ Recording Data Storage

the required number of times until the button

lamp starts to flash.

Each new recording of audio data to a USB flash drive

is automatically assigned a new file name, so existing

data is not overwritten.

E-23

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

Start recording.

To play back performance data recorded

on a USB flash drive

• For details about how to do this, see “Starting and

Stopping Recording” in “Operations Common to All

Modes” (page E-12).

• This will start recording to the USB flash drive. The

message “Audio Recording . . .” will appear on the

display.

Press the

(AUDIO RECORDER) button

the required number of times until the button

lamp is lit.

NOTE

• Do not remove the USB flash drive from the USB

flash drive port while the AUDIO RECORDER

button lamp is lit or flashing. Doing so will interrupt

recording and may corrupt data.

This will display the audio file selection screen.

• To exit the Audio Recorder, press the

RECORDER) button the required number of times

(AUDIO

Use the

(–, +) buttons to select a song.

until its lamp goes out.

• The

(–) button scrolls through the recorded songs

in order from the newest (most recently recorded) to

the oldest.

To record keyboard play while playing

back a phrase or song

• The

(+) button scrolls from the old to the new.

Start playback.

Select the phrase or song you want to play

back.

• For details about how to do this, see “Starting and

Stopping Playback” in “Operations Common to All

Modes” (page E-11).

• Phrase: Perform steps 1 through 3 under “Listening

to a Phrase” (page E-20).

• Song: Perform steps 1 and 2 under “To play back a

song” (page E-22).

• To scroll back, hold down the

(SONG) button as

you press the

(REW) button. To scroll forward,

hold down the

(SONG) button as you press the

(FF) button. This operation can be performed only

while an audio file is playing back.

Press the

(AUDIO RECORDER) button

• You can pause playback by holding down the

the required number of times until the button

lamp starts to flash.

(SONG) button as you press the

(PAUSE) button.

This operation can be performed only while an audio

file is playing back.

• A MIDI file (SMF) and audio file cannot be played

back simultaneously.

Start recording.

• For details about how to do this, see “Starting and

Stopping Recording” in “Operations Common to All

Modes” (page E-12).

• To exit the Audio Recorder, press the

(AUDIO

RECORDER) button the required number of times

• At the point where you want to start phrase or song

until its lamp goes out.

playback while recording, press the

(START/

STOP) button.

• To turn off playback and continue recording, press

the (START/STOP) button again.

To stop recording, press the

button.

(RECORD)

• The

(RECORD) button lamp will go out to let you

know that audio recording is stopped. Phrase/song

playback also will automatically stop at this time.

• To exit the Audio Recorder, press the

(AUDIO

RECORDER) button the required number of times

until the button lamp goes out.

NOTE

• A MIDI file (SMF) cannot be played back during

recording.

E-24

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Your Keyboard Play

Deleting an Audio File from a USB Flash

Drive

Files can be deleted one at a time.

IMPORTANT!

• The procedure below deletes all of the data of the

selected song. Note that the delete operation cannot

be undone. Check to make sure you really do not

need the file in USB flash drive before you perform

the following steps.

Press the

(AUDIO RECORDER) button

the required number of times until the button

lamp is lit.

Use the

you want to delete.

(–, +) buttons to select the song

• The

(–) button scrolls through the recorded songs

in order from the newest (most recently recorded) to

the oldest.

• The

(+) button scrolls from the old to the new.

• After selecting a song, you can play it back by

pressing the (START/STOP) button. Press the

(START/STOP) button again to stop playback.

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

• To cancel the delete operation, press the

button.

(NO)

To delete the file, press the (YES) button.

This will delete the file you selected.

NOTE

• The file number of file you delete remains unused.

Recording a new file will cause the file number that

comes after the last file recorded to the USB flash

drive.

E-25

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Stage Setups

dl dm dn do dp dq

ds dt ek el em

Playing the Zone 1 Tone on all Keys

Overview

For details about zone parts, see the separate

“Tutorial”.

Your Digital Piano supports simultaneous play of up to

four tones on the keyboard. In addition to tone

assignments, you can also save effect, arpeggio, and

other settings as a stage setup (called a “Stage

Setting”), which can be easily recalled at any time, even

while you are playing, to instantly change the Digital

Piano’s setup.

Hold down the

lamp starts to flash.

(BANK) button until its

This sets up the keyboard so all keys will sound the

tone selected for Zone 1. It also causes Stage Setup

settings to change to presets that are optimized for the

selected tone.

• You can have up to 100 stage setups (numbered 0-0

to 9-9) stored in Digital Piano memory.

z For details about parameters that can be edited, see

the separate “Tutorial”.

Recalling a Stage Setup

Press the

This will cause the button’s lamp to light.

(BANK) button.

Specify a bank and stage setup (Stage

Setting) number.

• First, holding down the

(BANK) button, use

buttons

through

or buttons

through

specify the bank number.

• Next, use buttons through

or buttons

through

to specify the stage setup number.

NOTE

• After specifying the stage setup number, edit the

stage setup contents and save the results. For details

about how to display the editing screen, see “Using

the Editing Function” in “Operations Common to

All Modes” (page E-13).

E-26

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Functions

ds dt ek el em

Settings

System Settings

Display

Description

Settings

The Digital Piano settings listed below can be

configured using the system setting (SYS SETTING)

menu.

Display contrast (LCD Contrast).

LCD Contrast Adjusts the contrast of the

display.

1 to 17

• Display contrast

Auto storage of settings (Auto

Resume). When this setting is on,

the Digital Piano remembers its

• Initial power on mode

• Auto power off (page E-6) on/off

• Panel lock

Auto Resume

Off, On

current settings when it is turned

off, and restores them the next

time power is turned on.

Press

(SYS SETTING).

• This displays the setting screen with “General>Ent”

selected.

Auto Power Off function on/off

Auto Power

Off

(Auto Power Off). Turning off

this setting disables Auto Power

Off (page E-6).

Panel Lock (Panel Lock). When

this setting is turned on, the

Digital Piano’s buttons (except

for the

(P) power button and

buttons required for unlock) are

locked, so no operation can be

performed. Turn on panel lock

when you want to protect

against unintentional button

operations.

Panel Lock

Off, On

Press

(ENTER).

(u),

Use the

(w),

(q), and

ek el

(i) buttons to select the item whose setting

you want to configure.

After settings are the way you want, press the

(SYS SETTING) button to exit the setting

screen.

Change the setting.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

E-27

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Useful Functions

Deleting Data

Use the procedure below to delete specific edited or

recorded data (tones, arpeggios, phrases, songs, stage

setups) from Digital Piano memory.

Press the

(SYS SETTING) button.

Use the

“Initialize”.

(w) and

(q) buttons to select

Use the

(u),

(w),

(q), and

ek el

(i) buttons to select the type of data you

want to delete.

• To delete one stage setup: Init Stage Set

• To delete one user tone: Init Tone

• To delete one user arpeggio: Clear Arpeggio

• To delete one recorded phrase: Clear Phrase

• To delete one recorded song: Clear Song Seq

• To delete all data: Initialize All

Select the number of the data you want to

delete.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

• If you selected “Initialize All” in step 3 of the above

procedure, you do not need to select a data number

here.

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

• If you want to cancel the delete operation, press the

(NO) or

(EXIT) button.

Press the

(YES) button.

The message “Please Wait” will remain on the display

while the operation is being performed. Do not perform

any operation while this message is on the display.

“Complete” appears on the display after data delete is

complete.

z For information about other setting items that

appear on the display when the (SYS SETTING)

button is pressed, see the separate “Tutorial”.

E-28

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

bo bp bq br bs bt ck cl

cn co cp

dt ek

Your Digital Piano supports the following USB flash

drive operations.

• USB flash drive formatting

• Data storage to a USB flash drive

– Stage setups, tones, arpeggio, and phrase

sequencer data edited with the Digital Piano can

be saved on a USB flash drive.

■ Types of Data

Supported

Operations

Description

(File Name Extension)

Save to

Load

fromUSB

Flash

Data Type

USB

Flash

Drive

– Song data recorded with the Digital Piano’s song

sequencer is on a USB flash drive as MIDI files

(SMF format 0).

– Digital Piano play can be recorded directly to a

USB flash drive.

Stage Setting Stage setup data edited

(page E-26)

with this Digital Piano

(ZPF)

Tone

(Page E-14)

The following tone data,

edited with this Digital

Piano

For details, see “Recording to a USB Flash Drive”

(page E-23).

• USB flash drive data loading to Digital Piano

memory

• Delete data from a USB flash drive

• Easy play back of song data from a USB flash drive

• Melody tone data

(ZTN)

• Hex Layer Tone data

(ZLT)

• Drum sound data

(ZDR)

Arpeggio

(page E-17)

Arpeggio data edited

with this Digital Piano

(ZAR)

Phrase

Sequencer

(page E-18)

Phrase sequencer data

edited with this Digital

Piano (ZPH)

Song

sequencer

(page E-21)

Song sequencer data

edited with this Digital

Piano (ZSQ)

All data

All of the above data

(ZAL)

* Can be saved as a MIDI file (SMF format 0).

E-29

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

Storing Standard Audio Data

(WAV Files) to a USB Flash

Drive

Performing a record operation with the Digital Piano’s

audio recorder stores the data as a WAV file

(automatically assigned a name from TAKE00.WAV to

TAKE99.WAV) in the MUSICDAT folder (which is

created automatically by the format operation) on the

USB flash drive. You also can connect a USB flash drive

to a computer and change the names of audio data

(WAV) files to the format “TAKExx.WAV”*, and move

them to the MUSICDAT folder. Then you will be able

to play them back on the Digital Piano.

Copyrights

You are allowed to use recordings for your own

personal use. Any reproduction of an audio or music

format file, without the permission of its copyright

holder, is strictly prohibited under copyright laws

and international treaties. Also, making such files

available on the Internet or distributing them to third

parties, regardless of whether such activities are

conducted with or without compensation, is strictly

prohibited under copyright laws and international

treaties. CASIO COMPUTER CO., LTD. shall not be

held in any way liable for any use of this Digital

Piano that is illegal under copyright laws.

* xx = 00 to 99

Connecting a USB Flash Drive

to and Detaching It from the

Digital Piano

USB Flash Drive and USB Flash Drive

Port Handling Precautions

IMPORTANT!

• When you plug in a USB flash drive, the Digital

Piano initially needs to “mount” the USB flash drive

and prepare for data exchange. Note that Digital

Piano operations are momentarily disabled while a

USB flash drive mounting sequence is being

performed. While the mounting process is in

progress, the message “Mounting Media” will be

displayed on the display. It may take up to 10 or 20

seconds or even longer for a USB flash drive to be

mounted. Do not attempt to perform any operation

on the Digital Piano while a mounting sequence is in

progress. A USB flash drive needs to be mounted

each time it is connected to the Digital Piano.

• If you turn on the Digital Piano while USB flash drive

is plugged into the Digital Piano, the mount operation

described above will need to be performed, and

Digital Piano operation will be disabled during that

time.

• Be sure to observe the precautions provided in the

documentation that comes with the USB flash drive.

• Avoid using a USB flash drive under the following

conditions. Such conditions can corrupt data stored

on the USB flash drive.

– Areas subjected to high temperature, high

humidity, or corrosive gas

– Areas subjected to strong electrostatic charge and

digital noise

• Never remove the USB flash drive while data is

being written to or loaded from it. Doing so can

corrupt the data on the USB flash drive and damage

the USB flash drive port.

• Never insert anything besides a USB flash drive into

the USB flash drive port. Doing so creates the risk of

malfunction.

• A USB flash drive can become warm after very long

use. This is normal and does not indicate

malfunction.

• Never plug any other device besides a USB flash

drive into the USB flash drive port.

• Static electricity conducted to the USB flash drive

port from your hand or from a USB flash drive can

cause malfunction of the Digital Piano. If this

happens, turn the Digital Piano off and then back on

again.

E-30

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

Supported USB Flash Drives

■ To insert a USB flash drive

This Digital Piano supports USB flash drives formatted

to FAT32. If your USB flash drive is formatted to a

different file system, use the Windows format function

to reformat it to FAT32. Do not use quick format.

The following types of USB flash drives are not

supported.

• A USB flash drive that is recognized as multiple

drives by the computer

• A USB flash drive that is recognized as a CD-ROM

by the computer

As shown in the illustration below, insert the

USB flash drive into the Digital Piano’s USB

flash drive port ( ).

• Carefully push the USB flash drive in as far as it will

go. Do not use undue force when inserting the USB

flash drive.

USB flash drive port

• A USB flash drive that has an anti-virus function,

security function, or other special function

USB flash drive

Insert the USB flash drive you want to format

into the Digital Piano’s USB flash drive port

(

Hold down the

(MEDIA) button until the

■ To remove a USB flash drive

“MEDIA” screen appears.

Check to confirm that there is no data

exchange operation being performed, and

then pull the USB flash drive straight out.

Formatting a USB Flash Drive

Use the

“Format”.

(w) and

(q) buttons to select

IMPORTANT!

• Be sure to format a USB flash drive on the Digital

Piano before using it for the first time.

• Before formatting a USB flash drive, make sure it

does not have any valuable data stored on it.

• The format operation performed by this Digital Piano

is a “quick format”. If you want to completely delete

all of the data in USB flash drive, format it on your

computer or some other device.

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

• If you want to cancel the format operation, press the

(NO) or

(EXIT) button.

Press the

(YES) button.

The message “Please Wait” will remain on the display

while the format operation is being performed. Do not

perform any Digital Piano operation while this message

is on the display. “Complete” appears on the display

after formatting is complete.

E-31

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

■ USB Flash Drive Data (File) Storage

Saving Digital Piano Data to a

USB Flash Drive

Use the following procedure to save Digital Piano data

to a USB flash drive.

• The following types of data can be stored to USB

flash drive.

Stage setups, tones, arpeggios, phrases, song

sequencer data, all data

Locations

The above procedure stores Digital Piano data in a

folder named MUSICDAT on the USB flash drive.

• The above data folders are created automatically

when you format the USB flash drive on the Digital

Piano (page E-31).

• Note that a file not in one of the data folders cannot

be loaded, deleted, or renamed by the Digital Piano.

You also will not be able to recall, delete, or play any

file stored in any subfolder inside one of the data

folders.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port ( ).

Loading Data from a USB

Flash Drive to Digital Piano

Memory

Hold down the

(MEDIA) button until the

“MEDIA” screen appears.

Use the

“Save”.

(w) and

(q) buttons to select

You can use the procedure below to load data from a

USB flash drive into Digital Piano memory.

Press the

(ENTER) button.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port ( ).

Use the

(w) and

(q) buttons to select

a data type of the data you want to save.

• You can select one of the data types below.

Stage setups (Stage Setting), tones (Tone), arpeggios

(Arpeggio), phrases (Phrase), song sequencer data

(Song Seq), all data (All Data)

Hold down the

(MEDIA) button until the

“MEDIA” screen appears.

Use the

“Load”.

(w) and

(q) buttons to select

• To save a song sequencer data as a MIDI file (SMF),

select “Song Seq” and then press the

(ENTER)

button. Next, select “SMF Save” and then press the

(ENTER) button again.

Press the

Use the

(ENTER) button.

Press the

(ENTER) button.

(w) and

(q) buttons to select

a data type of the data you want to load.

Specify the number of the data you want to

save to the USB flash drive.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

• You can select one of the data types below.

Stage setups (Stage Setting), tones (Tone), arpeggios

(Arpeggio), phrases (Phrase), song sequencer data

(Song Seq), all data (All Data)

• When saving a tone, you can use buttons

through

Press the

(ENTER) button.

(tone group) to select the type of file being saved.

Specify the number of the data you want to

load from the USB flash drive.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

• If you want to cancel the save, press the (NO) or

(EXIT) button.

• When loading a tone, you can use buttons

through

Press the

(YES) button.

(tone group) to select the type of file being loaded.

The message “Please Wait” will remain on the display

while the save operation is being performed. Do not

perform any Digital Piano operation while this message

is on the display. “Complete” appears on the display

after data save is complete.

(PIANO) to

(SYNTH/VARIOUS) buttons:

Melody tone data (ZTN)

(DRUMS) button: Drum sound data (ZDR)

(HEX LAYER) button: Hex layer tone data (ZLT)

• If there is already a file with the same name on the

USB flash drive, a message “Replace?” will appear

asking if you want to overwrite it with the new data.

Press the

(ENTER) button.

This will display a confirmation message “SURE?”.

• If you want to cancel the data load, press the (NO)

Press the

(YES) button to overwrite or the

(NO)

(EXIT) button.

button to cancel the save operation.

E-32

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

Press the

(YES) button.

Renaming a USB Flash Drive

File

Use the following procedure to change the file name of

a file on a USB flash drive.

The message “Please Wait” will remain on the display

while the load operation is being performed. Do not

perform any Digital Piano operation while this message

is on the display. “Complete” appears on the display

after data loading is complete.

• If there already is a file with the same name in the

Digital Piano memory, a message “Replace?” will

appear asking if you want to replace it with the new

Insert the USB flash drive into the Digital

Piano’s USB flash drive port ( ).

data. Press the

(NO) button to cancel the load operation.

(YES) button to overwrite or the

Hold down the

(MEDIA) button until the

“MEDIA” screen appears.

Deleting Data from a USB

Flash Drive

Use the (w) and (q) buttons to select

“Rename”.

Use the following procedure to delete USB flash drive

data (files).

Press the

(ENTER) button.

Insert the USB flash drive into the Digital

Piano’s USB flash drive port ( ).

For the remainder of this procedure, perform

the steps starting from step 7 under “Loading

Data from a USB Flash Drive to Digital Piano

Memory” (page E-32).

Hold down the

“MEDIA” screen appears.

(MEDIA) button until the

• For details about how to input characters, see

“Inputting Text Characters” in “Operations Common

to All Modes” (page E-10).

Use the (w) and (q) buttons to select

“Delete”.

• The characters you can select are shown below.

Press the

(ENTER) button.

(

}

For the remainder of this procedure, perform

the steps starting from step 7 under “Loading

Data from a USB Flash Drive to Digital Piano

Memory” (page E-32).

M N O

V W X

{

)

@ ~

E-33

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

Playing Back Audio Data

Stored on a USB Flash Drive

Playing Back a MIDI File

Stored on a USB Flash Drive

You can use your Digital Piano to play back audio data

(WAV files*) stored on a commercially available USB

flash drive.

You can use your Digital Piano to play back MIDI files

(SMF) stored on a commercially available USB flash

drive.

See “USB Flash Drive” on page E-29 for more

information.

* Linear PCM, 16bit, 44.1 kHz, Stereo

PREPARATION

• Use a computer to move the MIDI file (SMF) you

want to play into the MUSICDAT folder on the USB

flash drive.

PREPARATION

• Prepare a USB flash drive that contains data

recorded to it using the Digital Piano’s Audio

Recorder. See “Recording to a USB Flash Drive” on

page E-23 for more information.

• You can also use a computer to save audio data

(WAV file) to the USB Flash Drive for playback. See

“Storing Standard Audio Data (WAV Files) to a USB

Flash Drive” on page E-30 for more information.

• Insert the USB flash drive that contains the data you

want to play back into your Digital Piano’s USB

flash drive port.

Plug the USB flash drive into the Digital

Piano’s USB flash drive port ( ).

Hold down the

(MEDIA) button until the

message “MEDIA” appears on the Digital

Piano display.

Use the

(w) and

(q) buttons to select

“SMF Play”.

Press the (ENTER) button.

Press the

(AUDIO RECORDER) button

the required number of times until the button

lamp is lit.

Specify the number of the MIDI file (SMF) you

want to play.

• For details about how to do this, see “Changing a

Number or a Value” in “Operations Common to All

Modes” (page E-9).

Start playback.

This will display the audio file selection screen.

• For details about how to do this, see the steps starting

from step 2 under “Starting and Stopping Playback”

in “Operations Common to All Modes” (page E-11).

Use the

(–, +) buttons to select a song.

• The

(+) button scrolls forward through the song

• Use the

measure, or the

• You can pause playback by pressing the

button.

(REW) button to scroll back measure-by-

file names (TAKE00.WAV, TAKE01.WAV, etc.) The

(–) button scrolls backward through the song file

(FF) button to scroll forward.

(PAUSE)

names.

Start playback.

• For details about how to do this, see “Starting and

Stopping Playback” in “Operations Common to All

Modes” (page E-11).

• To exit the Audio Recorder, press the

(AUDIO

RECORDER) button the required number of times

until its lamp goes out.

E-34

Download from Www.Somanuals.com. All Manuals Search And Download.

USB Flash Drive

Error Messages

One of the error messages below appears on the display when a problem occurs.

• Press the

(EXIT) button to clear an error message.

Display Message

Cause

Action

1. The USB flash drive is not connected to the

Digital Piano’s USB flash drive port.

1. Correctly plug the USB flash drive into the USB

flash drive port.

2. The USB flash drive was removed while some

operation was in progress.

2. Do not remove the USB flash drive while any

operation is in progress.

No Media

3. The USB flash drive is write-protected.

3. Unprotect the USB flash drive.

4. The USB flash drive has anti-virus software.

4. Use a USB flash drive that does not have anti-

virus software.

There is no loadable or playable file in the

“MUSICDAT” folder.

Move the file you want to load into the appropriate

location (pages E-30, 32) in the “MUSICDAT” folder.

No File

You are attempting to save data to a USB flash drive Record something before performing a save

when there is no data to save. operation.

A read-only file with the same name you are trying • Change the name and then save the new data.

No Data

to use is already stored on USB flash drive.

• Remove the read-only attribute from the existing

USB flash drive file and overwrite it with the new

data.

Read Only

Media Full

• Use a different USB flash drive.

There is not enough space available on the USB flash Delete some of the files on the USB flash drive to

drive.

make room for new data (page E-33) or use a

different USB flash drive.

1. There are too many files on the USB flash drive. 1. Delete some of the files on the USB flash drive to

make room for new data.

Too Many Files

Not SMF01

2. There is a file named TAKE99.WAV in the

“MUSICDAT” folder.

2. Delete the WAV file in the “MUSICDAT” folder.

You are attempting to play back song data that is not This Digital Piano supports playback of SMF Format

SMF Format 0 or Format 1. 0 or Format 1 only.

1. The data on the USB flash drive is too big to play. 1 and 2. This Digital Piano supports playback of

song data files with a maximum size of

320KB.

2. The SMF file size exceeded 320KB during SMF

save.

3. The phrase data you are trying to load is too

large to be imported into Digital Piano memory.

3. Delete some of the data currently in Digital Piano

memory to free up available space.

Size Over

• The maximum allowable size of a phrase file

for import is approximately 8KB.

• The maximum allowable total size of phrase

files that can be imported is approximately

1MB (up to 1,000 files).

1. The USB flash drive data is corrupted.

—

Wrong Data

Memory Full

2. USB flash drive contains data that is not

supported by this Digital Piano.

There is not enough Digital Piano memory available Reduce the size of the song data.

to convert a song sequencer song to SMF data and

store it on the USB flash drive.

Example:

Delete any tracks that are not required.

1. The USB flash drive format is not compatible

with this Digital Piano.

2. The USB flash drive is corrupted.

The USB flash drive is corrupted.

You are attempting to rename a USB flash drive file Rename to a different file name.

with a file name that is already used by another file

on the USB flash drive.

1. Format the USB flash drive on the Digital Piano.

Format Error

Media Error

Filename Error

2. Use a different USB flash drive.

Use a different USB flash drive.

E-35

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a Computer

You can connect the Digital Piano to a computer and

Connecting the Digital Piano

exchange MIDI data between them. You can send play

data from the Digital Piano to commercially available

music software running on your computer, or you can

send MIDI data from your computer to the Digital

Piano for playback.

to Your Computer

IMPORTANT!

• Make sure you follow the steps of the procedure

below exactly. Connecting incorrectly can make data

send and receive impossible.

Minimum Computer System

Requirements

Turn off the Digital Piano and then start up

your computer.

The following shows the minimum computer system

requirements for sending and receiving MIDI data.

Check to make sure that your computer complies with

these requirements before connecting the Digital Piano

to it.

• Do not start up the music software on your computer

yet!

After starting up your computer, use a

commercially available USB cable to connect

it to the Digital Piano.

z Operating System

Windows^®XP (SP2 or later)^*1

Windows Vista^{® *2}

B connector

USB cable

(A-B type)

Windows^®7 ^*3

Windows^®8 ^*4

Mac OS^®X (10.3.9, 10.4.11, 10.5.X, 10.6.X, 10.7.X, 10.8.X)

*1: Windows XP Home Edition

Windows XP Professional (32-bit)

*2: Windows Vista (32-bit)

*3: Windows 7 (32-bit, 64-bit)

*4: Windows 8 (32-bit, 64-bit)

Digital Piano USB port

A connector

Computer USB port

Turn on the Digital Piano.

z USB port

• If this is the first time you are connecting the Digital

Piano to your computer, the driver software required

to send and receive data will be installed on your

computer automatically.

IMPORTANT!

• Never connect to a computer that does not conform

to the above requirements. Doing so can cause

problems with your computer.

Start up commercially available music

software on your computer.

Configure the music software settings to

select one of the following as the MIDI device.

CASIO USB-MIDI : For Windows Vista, Windows 7,

Windows 8, Mac OS X

USB Audio Device: For Windows XP

• For information about how to select the MIDI device,

see the user documentation that comes with the

music software you are using.

IMPORTANT!

• Be sure to turn on the Digital Piano first before

starting up your computer’s music software.

E-36

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a Computer

NOTE

Saving and Loading Digital

• Once you are able to connect successfully, there is no

problem with leaving the USB cable connected when

you turn off your computer and/or Digital Piano.

• This Digital Piano conforms to General MIDI Level 1

(GM).

Piano Data to a Computer and

Editing Digital Piano Data on a

Computer

• For detailed specifications and connections that

apply to MIDI data send and receive by this Digital

Piano, see the latest support information provided

by the website at the following URL.

You can transfer user tones, phrases, and other data

you saved with the Digital Piano to a computer for

storage. Later, you can return the data back to the

Digital Piano when you need it.

You can also edit tone, stage setup and other Digital

Piano data on a computer, where it is easier to work

with. A special Data Editor application is required in

order to perform operations such as these.

http://world.casio.com/

Go to the CASIO WORLDWIDE site at the

following URL.

http://world.casio.com/

At the site, select a geographic area or

country.

After accessing the area site, navigate to the

minimum computer system requirements for

Data Editor for this product.

• You should be able to find a link to Data Editor

information on the product introduction page of this

product. If you cannot find such a link, use the search

form of the area site where you are located to enter

the model name of this product and search for it.

• Note that site contents are subject to change without

notice.

Check if your computer system complies with

the minimum requirements for Data Editor.

Download Data Editor and its user’s guide to

your computer.

Follow the procedure in the Data Editor user’s

guide you downloaded in step 5 to install

Data Editor.

Use the procedures in the Data Editor user’s

guide to transfer and edit data.

• See the Data Editor user’s guide for information

about the types of data that can be transferred and

the data that can be edited.

E-37

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Troubleshooting

Problem

Cause

Action

See Page

No sound is produced when I 1. The VOLUME controller is set to 1. Rotate the VOLUME controller more

press a keyboard key. “MIN”. towards “MAX”.

2. This Digital Piano does not have 2. Connect audio equipment, an amplifier, ) E-7

) E-6

built-in speakers. Nothing will

sound if an output device is not

connected.

or headphones.

The pitch of the Digital Piano 1. Digital Piano tuning is incorrect. 1. Adjust Digital Piano tuning, or turn the

) Tutorial

is off.

Digital Piano off and then back on again.

2. The Digital Piano’s key setting is 2. Change the key setting to “440.0 Hz”, or

something other than “440.0 Hz”.

turn Digital Piano power off and then

back on again.

3. A non-standard temperament

setting is being used.

3. Change the temperament setting to

“00:Equal”, which is the standard

modern tuning.

4. Octave shift is enabled.

4. Change the octave shift setting to 0.

Tones and/or effects sound

strange. Turning power off

and then back on again does

not eliminate the problem.

The “Auto Resume” feature is

turned on.

Turn off “Auto Resume”. Next, turn power

off and then back on again.

) E-27

Example: Note intensity does

not change even though I

alter key pressure.

Chorus, reverb, and/or delay 1. Lower the system effect send

1. Change the system effect send and/or

return levels to greater values.

) Tutorial

are not being applied.

and/or return level.

2. A small value is selected for the 2. Select a larger value for the effect

effect setting of an effect

parameter.

setting of the effect parameter.

I cannot transfer data after

connecting the Digital Piano

to a computer.

—

1. Check to make sure that the USB cable ) E-36

is connected to the Digital Piano and

computer, and that the correct device is

selected with your computer’s music

software.

2. Turn off the Digital Piano and then exit

the music software on your computer.

Next, turn the Digital Piano back on and

then restart the music software on your

computer.

I cannot store data to a USB

flash drive or load data from a

USB flash drive.

—

See “Error Messages”.

) E-35

A tone’s quality and volume

sounds slightly different

depending where it is played

on the keyboard.

This is an unavoidable result of the digital sampling process^*, and does not indicate

malfunction.

* Multiple digital samples are taken for the low range, middle range, and high range of the

original musical instrument. Because of this, there may be a very slight difference in tonal

quality and volume between sample ranges.

When I press a button, the

Performing a button operation while playing with the recorder, or other functions can cause

note that is sounding cuts out such phenomena when the Digital Piano switches internal tone effects. It does not indicate

momentarily or there is a

slight change in how effects

are applied.

malfunction.

Even though I play on

different ranges of the

keyboard, the notes do not

change octaves.

The ranges of certain tones are limited, which means that octaves change normally up to a

certain low note or high note. With such a tone, the notes of the lowest octave will be repeated

to the left of the lowest possible note, and the highest octave will be repeated to the right of

the highest possible note. This is due do limitations in the range of the original musical

instrument for each tone, and does not indicate malfunction of the Digital Piano.

E-38

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Product Specifications

Model

PX-5SWE

Sound Source

Keyboard

Multi-dimensional Morphing AiR

88-key piano keyboard, with Touch Response (3 levels, Off), High-Resolution Velocity, Key Off Velocity,

Hammer Response

Maximum Polyphony

Tones

256 notes

370 preset, 350 user

Melody Tones: 300 preset, 180 user

Hex Layer Tones: 50 preset, 150 user

PCM Drum Tones: 20 preset, 20 user

Effects

• System Effects: Reverb, Chorus, Delay, Resonance

• Master Effects: 4 band equalizer, Compressor

• DSP: 20 types

Number of Demo Songs

Number of Stage Setups

Phrase Sequencer

100

• Number of Phrases: 1000

• Number of Songs (Song Sequencer): 10

• Playback Mode: One time, loop

• Memory Capacity: Approximately 1MB

• Other: Overdubbing, Note Quantize (for recording)

Audio Recorder

• Real-time recording and playback to USB flash drive*

* Linear PCM, 16bit, 44.1 kHz, stereo .WAV format

• Number of Songs: 100

• Approximately 25 minutes maximum recording per song.

Mixer

16 parts + Externally input parts

Other Functions

• Transpose: 1 octaves (–12 to 0 to +12 semitones)

• Octave Shift: 3 octaves

• Tuning: A4 = 415.5 - 440.0 - 465.9 Hz

• Temperaments: 17 types (including equal temperament)

• Stretch Tune: 8 types

• Number of Arpeggios: Preset: 100

User: 100

MIDI

16 multi-timbre received, GM Level 1 standard

Main Controllers

USB Flash Drive

Inputs/Outputs

Bender wheel, modulation wheel, knobs × 4, sliders × 6

SMF playback, playback of audio data, user data save/load

• Pedal Jacks: Standard jacks × 2

• Power: 12V DC (Power Consumption: 12V =5W)

• PHONES jacks: Stereo standard jacks × 2

• MIDI IN, OUT/THRU terminals

• LINE OUT R, L/MONO jacks: Standard jacks × 2

Output impedance: 2.3kΩ

Output voltage: 1.8V (RMS) MAX

• LINE IN R, L/MONO jacks: Standard jacks × 2

Input impedance: 9.0kΩ

Input voltage: 200mV

• AUDIO IN jack: Stereo mini jack

Input Impedance: 9.0kΩ, Input Sensitivity: 200mV

• USB flash drive port : Type A

• USB port: Type B

Power Supply

2-way

Batteries: 8 AA-size alkaline batteries

Battery Life: Approximately 3 hours continuous operation on alkaline batteries

AC Adaptor: AD-A12150LW

Auto Power Off Time: Approximately 6 minutes after last key operation during battery use, approximately 4

hours after last key operation during AC adaptor use. Auto Power Off can be

disabled.

Dimensions

Weight

132.2 (W) × 28.6 (D) × 13.5 (H) cm (52 ¹/₁₆× 11 ¹/₄× 5 ⁵/₁₆inch)

Approximately 11.1kg (24.5lbs)

* Based on 1KB = 1024bytes, 1MB = 1024²bytes

• Specifications and designs are subject to change without notice.

• Access the website below for the latest news about specifications and firmware versions.

http://world.casio.com/

E-39

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

• Any reproduction of the contents of this manual,

either in part or its entirety, is prohibited. Except for

your own, personal use, any other use of the

contents of this manual without the consent of

CASIO is prohibited under copyright laws.

• IN NO EVENT SHALL CASIO BE LIABLE FOR

ANY DAMAGES WHATSOEVER (INCLUDING,

WITHOUT LIMITATION, DAMAGES FOR LOSS

OF PROFITS, BUSINESS INTERRUPTION, LOSS

OF INFORMATION) ARISING OUT OF THE USE

OF OR INABILITY TO USE THIS MANUAL OR

PRODUCT, EVEN IF CASIO HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

• The contents of this manual are subject to change

without notice.

Operating Precautions

Be sure to read and observe the following operating

precautions.

■ Location

Avoid the following locations for this product.

• Areas exposed to direct sunlight and high humidity

• Areas subjected to temperature extremes

• Near a radio, TV, video deck, or tuner

• The above devices will not cause malfunction of the

product, but the product can cause interference in

the audio or video of a nearby device.

■ User Maintenance

• Never use benzine, alcohol, thinner, or other

chemical agents to clean the product.

• To clean the product or its keyboard, wipe with a

soft cloth moistened in a weak solution of water and

a mild neutral detergent. Wring all excess moisture

from the cloth before wiping.

■ AC Adaptor Handling Precautions

• Use a power outlet that is easily accessible so you

can unplug the AC adaptor when a malfunction

occurs or whenever else you need to do so.

• The AC adaptor is intended for indoor use only. Do

not use it where it might be exposed to splashing or

moisture. Do not place any container, such as a

flower vase, that contains liquid on the AC adaptor.

• Store the AC adaptor in a dry place.

• Use the AC adaptor in an open, well-ventilated area.

• Never cover the AC adaptor with newspaper, a table

cloth, a curtain, or any other similar item.

• Unplug the AC adaptor from the power outlet if you

do not plan to use the Digital Piano for a long time.

• Never try to repair the AC adaptor or modify it in

any way.

■ Included and Optional Accessories

Use only accessories that are specified for use with this

product. Use of unauthorized accessories creates the

risk of fire, electric shock, and personal injury.

■ Weld Lines

Lines may be visible on the exterior of the product.

These are “weld lines” that result from the plastic

molding process. They are not cracks or scratches.

• AC adaptor operating environment

Temperature: 0 to 40°C

Humidity: 10% to 90% RH

• Output polarity:

■ Musical Instrument Etiquette

Always be aware of others around you whenever using

this product. Be especially careful when playing late at

night to keep the volume at levels that do not disturb

others. Other steps you can take when playing late at

night are closing windows and using headphones.

E-40

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

AC Adaptor Handling Precautions

Model: AD-A12150LW

1. Read these instructions.

2. Keep these instructions on hand.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).

8. Use only attachments and accessories specified by the manufacturer.

9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:

when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into

the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,

when the product does not operate normally, when the product is dropped.

10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing

liquid on the product.

11. Do not allow the electrical load output to exceed the label rating.

12. Make sure the surrounding area is dry before plugging into a power source.

13. Make sure the product is oriented correctly.

14. Unplug the product during lightning storms or when you do not plan to use it for a long time.

15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the

manufacturer’s instructions.

16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in

locations close to plugs and convenience receptacles, and in locations where it exits from the product.

17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow

immediate disconnection of the plug in case of emergency.

The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which

may be sufficient to constitute the risk of electric shock to users.

’

The symbol below is an alert indicating the presence of important operating and maintenance (servicing)

instructions in the documentation that accompanies the product.

E-41

Download from Www.Somanuals.com. All Manuals Search And Download.

This recycle mark indicates that the packaging conforms to

the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado se

ajusta a la legislación de protección ambiental en Alemania.

MA1303-B Printed in China

Download from Www.Somanuals.com. All Manuals Search And Download.

Blanco Washer BFWM7 User Manual
Bogen Music Mixer MIC1X User Manual
Bolens Lawn Mower 129 270A User Manual
Bowers Wilkins Portable Speaker CDM 9NT User Manual
Broan Indoor Furnishings CR92490 User Manual
Bushnell Binoculars 26 0100 User Manual
Canon Projector LV S2 User Manual
Chicago Electric Portable Generator 92456 User Manual
Cisco Systems Computer Accessories CVXC6215SK9 User Manual
Cisco Systems Modem MCS7890C1BE8K9 User Manual