LCD Digital Camera
QV-2300UX/QV-2800UX
User’s Guide
All example procedures in this
User’s Guide are based on the
QV-2300UX. The same
procedures also apply to the
QV-2800UX, unless specifically
noted otherwise.
QV-2300UX
English
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Lens .........................................................................E-21
Contents
Changing the Lens Angle
Installing a Conversion Lens
Lens Precautions
E-21
E-22
E-23
E-2 INTRODUCTION
Monitor Screen Indicators .......................................E-24
REC mode
PLAY mode
E-24
E-25
Unpacking ................................................................. E-2
Contents .................................................................... E-3
Quick Reference........................................................ E-7
Operation Indicator Lamp .......................................E-26
REC mode
PLAY mode
E-27
E-27
Getting Ready
Recording an Image
Playback
E-7
E-8
E-9
Using the Bundled Accessories ..............................E-28
Using the Lens Cap
Attaching the Strap
Using the Soft Case
E-28
E-28
E-29
Deleting Images
E-10
Features ..................................................................E-12
Recording Features
E-13
Power Requirements ...............................................E-31
Loading Batteries
E-31
E-34
E-34
E-35
E-36
E-36
Precautions .............................................................E-15
Battery Handling Precautions
Low Battery Indicator
Using AC Power
Turning the Camera On and Off
Power Save Settings
General Precautions
Operating conditions
Condensation
E-15
E-16
E-16
E-17
About the camera’s backlight…
Memory Cards.........................................................E-38
E-18 GETTING ACQUAINTED
Inserting a Memory Card into the Camera
Removing a Memory Card from the Camera
Formatting a Memory Card
Memory Card Precautions
IBM Microdrive Precautions
E-38
E-39
E-40
E-41
E-41
General Guide .........................................................E-18
Front
Back
Terminals and Ports
Bottom
E-18
E-19
E-20
E-20
Menu Screens .........................................................E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
E-3
INTRODUCTION
Setting the Current Date and Time .........................E-44
E-63 OTHER RECORDING FUNCTIONS
Setting the Date and Time
Selecting the Date Format
Time Stamp
E-44
E-45
E-46
Shooting Portraits....................................................E-63
Shooting Landscapes .............................................E-64
Shooting Night Scenes ...........................................E-65
Instant Setup Using the Scene Mode .....................E-66
Registering Your Own Scene Setups ......................E-68
Recording a Movie ..................................................E-69
E-47 BASIC IMAGE RECORDING
Recording a Simple Snapshot ................................E-47
About the REC Mode Monitor Screen
About Auto Focus
Recording Precautions
Image Recording when the Battery is Low
E-49
E-49
E-49
E-50
To record a movie using the normal mode
To record a movie using the past mode
E-70
E-70
Shooting Panoramas ...............................................E-71
Shooting at Fixed Intervals .....................................E-72
Using Zoom .............................................................E-50
Using Optical Zoom
E-50
Using Digital Zoom
E-51
Canceling an Interval Mode Timer Operation
E-74
Using the Flash .......................................................E-52
Specifying the Exposure Mode ...............................E-74
Flash Status Indicators
Adjusting the Flash Intensity
Precautions when Using Flash
E-53
E-53
E-54
Program AE
E-74
E-75
E-76
E-78
E-79
Aperture Priority AE
Shutter Speed Priority AE
Manual Exposure
Selecting the Focus Mode ......................................E-55
Quick Exposure Mode Selection
Using the Auto Focus Mode
Using the Macro Mode
Using the Infinity Mode
Using the Manual Focus Mode
Using Focus Lock
E-55
E-56
E-57
E-57
E-58
Selecting the Metering Mode ..................................E-80
Quick Metering Mode Selection
E-81
Setting the Sensitivity Level ....................................E-81
Using the Filter Function .........................................E-82
Selecting White Balance .........................................E-83
Specifying Image Size and Quality .........................E-59
Using the Self-timer ................................................E-60
Exposure Compensation.........................................E-61
Adjusting White Balance Manually
E-83
Quick White Balance Selection
E-84
Download from Www.Somanuals.com. All Manuals Search And Download.
E-4
INTRODUCTION
Enhancing Certain Colors .......................................E-85
E-101 DELETING IMAGES
Turning the On-screen Grid On and Off .................E-86
Specifying Outline Sharpness ................................E-87
Specifying Color Saturation ....................................E-87
Specifying Contrast .................................................E-88
Specifying Power On Default Settings ....................E-88
Deleting the Displayed Image ...............................E-101
Deleting Selected Images .....................................E-102
Deleting All Images in Selected Folders...............E-103
Deleting All Unprotected Images ..........................E-104
Resetting the Camera
E-89
E-105 MANAGING IMAGES
Using the Camera’s Shortcut Features ..................E-90
Changing REC mode FUNCTION Menu Settings
Using the Shortcut Buttons
To assign REC mode FUNCTION menu items
to shortcut buttons
E-90
Folders and Files...................................................E-105
Folders
E-105
E-91
Files
E-106
Directly Accessing the REC mode FUNCTION Menu E-93
Selecting a Folder for Playback ............................E-107
Protecting Images Against Deletion .....................E-107
E-94 PLAYBACK
Protecting Selected Images
E-107
Protecting and Unprotecting All Images in Selected
Folders
Protecting and Unprotecting All Images
Basic Playback Operation .......................................E-94
Playing a Movie .......................................................E-95
Playing a Panorama ................................................E-96
Enlarging the Playback Image ................................E-97
Displaying the 9-image View ...................................E-98
E-108
E-109
DPOF.....................................................................E-110
Making DPOF Settings for Particular Images
Making DPOF Settings for Particular Folders
Making DPOF Settings of All Images
on the Memory Card
E-110
E-111
E-112
Selecting a Specific Image in the 9-image View
E-99
Using the Slide Show Feature ..............................E-100
Download from Www.Somanuals.com. All Manuals Search And Download.
E-5
INTRODUCTION
Using the HTML Card Browser .............................E-130
E-113 OTHER SETTINGS
Specifying the Card Browser Type
Viewing Card Browser File Contents
Saving Card Browser Files
E-130
E-132
E-135
Turning the Monitor Screen Indicators On and Off ... E-113
Changing the Display Language...........................E-114
Turning the Confirmation Beep On and Off .......... E-115
E-136 REFERENCE
Camera Menus ......................................................E-136
E-116 CONNECTING TO EXTERNAL EQUIPMENT
REC mode
E-136
PLAY mode
E-137
Connecting to a Television ....................................E-117
Selecting the Video Output Signal Mode
E-118
Scene List..............................................................E-138
Scene Mode Camera Setups ................................E-140
Mode Settings .......................................................E-142
Connecting the Wired Remote Controller
to the Camera .......................................................E-119
Connecting an External Flash Unit
(QV-2800UX Only) ................................................ E-119
Settings in Each Mode
Recording Mode + Exposure Mode Combinations E-143
E-142
External Flash Unit Requirements
Attaching an External Flash Unit
E-119
E-120
Troubleshooting .....................................................E-144
Messages
E-147
Connecting to a Computer ....................................E-122
Specifications ........................................................E-149
USB Port Connection (Windows, Macintosh)
E-123
Using a Serial Port Connection
E-124
Using a Memory Card to Transfer Image Data ..... E-125
Memory Card Data
DCF Protocol
Memory Card File Structure
Image Files Supported by the Camera
Precautions when Using a Memory Card
on a Computer
E-126
E-126
E-127
E-128
E-128
Download from Www.Somanuals.com. All Manuals Search And Download.
E-6
INTRODUCTION
Quick Reference
Getting Ready
1
2
(page E-31)
(page E-38)
Load batteries.
Insert the memory card.
1
2
3
1
2
3
PUSH
3
(page E-44)
Set the current time and date.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-7
INTRODUCTION
Recording an Image (page E-47)
3
Point the camera at the
subject, compose the
image on the monitor
screen, and press the
shutter release button
half way to focus the
image.
4
Press the shutter release
button all the way down
to record the image.
PO
WER
O
N
/
O
F
F
W
T
R
E
C
C
P
LA
Y
1
2
S
H
IF
T
IN
F
O
Slide the REC/PLAY
selector to “REC”.
Slide the POWER
ON/OFF switch to the
right to turn on the
camera.
M
F
Download from Www.Somanuals.com. All Manuals Search And Download.
E-8
INTRODUCTION
Playback (page E-94)
3
Use [+] (forward) and [–] (back)
to scroll through stored images
on the monitor screen.
PO
WER
O
N
/O
F
F
W
T
R
E
C
C
P
LA
Y
1
2
S
H
IF
T
IN
F
O
Slide the REC/PLAY
selector to “PLAY”.
Slide the POWER
ON/OFF switch to
the right to turn on
the camera.
M
F
Download from Www.Somanuals.com. All Manuals Search And Download.
E-9
INTRODUCTION
Deleting Images (page E-101)
3
Use [+] (forward) and [–]
(back) to scroll through
6
Use [+] and [–] to move the
stored images and display
the one you want to delete.
cursor to “Yes” and then
press the shutter release
button to delete the image
you selected.
1
Slide the POWER
ON/OFF switch to
the right to turn
on the camera.
PO
WER
O
N
/O
F
F
W
T
2
R
E
C
Slide the REC/PLAY
selector to “PLAY”.
5
D
R
A
Double check to make
sure you really want to
delete the image you
C
P
L
A
Y
S
H
IF
T
IN
F
O
MF
selected.
• You can exit the image delete
operation by pressing MENU.
4
Press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-10
INTRODUCTION
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss resulting from the use of this
manual.
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any loss or claims by third parties which may arise
through the use of the QV-2300UX or the QV-2800UX.
• CASIO COMPUTER CO., LTD. assumes no responsibility
for any damage or loss caused by deletion of data as a
result of malfunction, repairs, or battery replacement. Be
sure to back up all important data on other media to protect
against its loss.
• Windows and Internet Explorer are registered trademarks
of Microsoft Corporation.
• Macintosh is a registered trademark of Apple Computer,
Inc.
• CompactFlashTM and
SanDisk Corporation.
logo are registered trademarks of
• The USB driver uses software by Phoenix Technologies
Ltd.,
Compatibility Software Copyright C 1997
Phoenix Technologies Ltd., All Rights Reserved.
• IBM is a registered trademarks of International Business
Machines Corporation.
• Other company, product and service names used herein
may also be trademarks or service marks of others.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-11
INTRODUCTION
• USB compatibility
Features
• High-resolution 2.11-megapixel CCD
• 1.8-inch low-glare color LCD (HAST)
Connect to your computer for quick and easy image ex-
changed.
• HTML File Card Browser
Images are displayed on your computer screen in a conve-
nient format.
You can view a gallery of image thumbnails on your com-
puter screen.
• 12X zoom: 3X optical zoom, 4X digital zoom (QV-2300UX)
32X zoom: 8X optical zoom, 4X digital zoom (QV-2800UX)
• Swivel lens mechanism
Shoot from the angle you want without moving the camera
body.
• External flash connectability (QV-2800UX only)
• Memory card image storage
Supports CompactFlash cards (CF TYPE I/II) and the IBM
microdrive.
• Digital Print Order Format (DPOF)
Images can be printed easily in the sequence you want
using a DPOF compatible printer. DPOF can also be used
when specifying images and quantities for printing by pro-
fessional print services.
• Image management and manipulation software
The QV-2300UX comes bundled with a CD-ROM disc
that’s packed with useful software. Photo Loader auto-
mates uploading of images to your computer, and Pan-
orama Editor lets you stitch images together into panorama
scenes. Other bundled applications include Internet Ex-
plorer (Web browser), Outlook Express (e-mail software),
and QuickTime (movie viewer). You also get a copy of the
Adobe Acrobat Reader PDF file reader for reading the user
documentation on the CD-ROM disc.
• DCF Data Storage
DCF (Design rule for Camera File system) data storage
protocol provides image inter-compatibility between the
digital camera and printers.
• VIDEO OUT terminal
Connect to your TV for big-screen viewing of images.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-12
INTRODUCTION
Recording Features
Portrait Mode
Scene Mode
page E-63
page E-64
page E-65
page E-66
page E-69
page E-71
Landscape Mode
Movie Mode
Night Scene Mode
Panorama Mode
Download from Www.Somanuals.com. All Manuals Search And Download.
E-13
INTRODUCTION
Interval Mode
page E-72
Four exposure modes
Program AE, aperture priority AE, shutter speed priority
AE, manual exposure
pages E-74 to E-79
Three metering modes
Multi-pattern, center weighted, spot
pages E-80 to E-81
Four focus modes
Auto focus, macro, infinity, manual
pages E-55 to E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
E-14
INTRODUCTION
• Should foreign matter or water ever get into the camera,
Precautions
immediately turn power off, unplug the AC adaptor from the
power outlet, and contact your dealer or nearest CASIO
service provider. Using the camera under these conditions
creates the danger of fire and electrical shock.
General Precautions
Be sure to observe the following important precautions
whenever using the QV-2300UX or the QV-2800UX.
• Should you ever notice smoke or a strange odor coming out
of the camera, immediately turn power off and unplug the
AC adaptor from the power outlet. Using the camera under
these conditions creates the danger of fire and electrical
shock. After making sure there is no more smoke coming
from the camera, take it to your nearest CASIO service pro-
vider for repair. Never attempt your own maintenance.
• At least once a year, unplug the AC adaptor from the power
outlet and clean the area around the prongs of the plug.
Dust build up around the prongs can create the danger of
fire.
• If the camera’s case should ever become cracked due to
dropping it or otherwise subjecting it to rough treatment,
immediately turn power off, unplug the AC adaptor from the
power outlet, and contact your nearest CASIO service pro-
vider.
• Never use the camera inside of an air craft or in any other
areas where its use is prohibited. Doing so can result in an
accident.
• Physical damage and malfunction of this camera can
cause the image data stored in its memory to be deleted.
Be sure to always keep backup copies of data by transfer-
ring them to personal computer memory.
All references in this manual to “this camera” and “the cam-
era” refer to the CASIO QV-2300UX or QV-2800UX Digital
Camera.
• Never try to take pictures or use the built-in display while
operating a motor vehicle or while walking. Doing so cre-
ates the danger of serious accident.
• Never try to open the case of the camera or attempt your
own repairs. High-voltage internal components create the
risk of electrical shock when exposed. Always leave main-
tenance and repair work up to authorized CASIO service
providers.
• Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vi-
sion and create the danger of accident.
• Never fire the flash while it is too close to the subject’s
eyes. Intense light from the flash can cause eye damage if
it is fired too close to the eyes, especially with young chil-
dren. When using the flash, the camera should be at least
one meter from the eyes of the subject.
• Keep the camera away from water and other liquids, and
never let it get wet. Moisture creates the danger of fire and
electrical shock. Never use the camera outdoors in the rain
or snow, at the seashore or beach, in the bathroom, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-15
INTRODUCTION
• Never open the battery compartment cover, disconnect the
Condensation
AC adaptor from the camera or unplug it from the wall
socket while recording images. Doing so will not only make
storage of the current image impossible, it can also corrupt
other image data already stored in camera memory.
• When you bring the camera indoors on a cold day or other-
wise expose it to a sudden change of temperature, there is
the possibility that condensation can form on the exterior or
on interior components. Condensation can cause malfunc-
tion of the camera, so you should avoid exposing it to con-
ditions that might cause condensation.
• To keep condensation from forming, place the camera into
a plastic bag before moving it into a location that is much
warmer or colder than your current location. Leave it in the
plastic bag until the air inside the bag has a chance to
reach the same temperature as the new location. If con-
densation does form, remove the batteries from the cam-
era and leave the battery compartment cover open for a
few hours.
Operating conditions
• This camera is designed for use in temperatures ranging
from 0°C to 40°C.
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject to
temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
Download from Www.Somanuals.com. All Manuals Search And Download.
E-16
INTRODUCTION
About the camera’s backlight…
• The camera is equipped with a fluorescent light source to
provide the back lighting for its LCD.
• The normal service life of the backlight is approximately six
years, when the camera is used for about two hours a day.
• Should the LCD image appear abnormally dark, take the
camera to your dealer or an authorized CASIO service pro-
vider to have the light source replaced. Note that you will
be charged for this replacement.
•
Under very cold conditions, the backlight may require more
time than normal to light, or reddish bands may appear in
the displayed image. These conditions do not indicate mal-
function, and normal operation should return at higher tem-
peratures.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-17
GETTING ACQUAINTED
This section contains important information you should know when trying to operate the camera.
General Guide
The following illustrations show the names of each component, button, and switch on the camera.
Front
MENU button
(page E-43)
Terminal panel cover
(page E-20)
[+] / [–] buttons
(page E-43)
Flash
(page E-52)
Shutter release
button
(page E-47)
Exposure
sensor
Lens
(page E-21)
QV-2800UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-18
GETTING ACQUAINTED
POWER ON/OFF switch
(page E-36)
Back
Zoom slider
(page E-50)
Monitor screen
(page E-24)
REC/PLAY selector
(page E-47)
Operation lamp
(page E-26)
P
O
W
E
R
O
N
/O
F
Memory card slot cover
(page E-38)
F
W
T
External flash
sync terminal
(pages E-116, 119)
REC
(Self-Timer/Delete)
button (pages E-60, 101)
D
CAR
PLA
Y
SHIFT
INFO
MF
(Focus/
Nine Images) button
(pages E-55, 98)
Terminal cap
SHIFT INFO (Shift/
Information) button
(pages E-25, 90)
(page E-119)
(Flash/Folder) button
(pages E-52, 107)
QV-2800UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-19
GETTING ACQUAINTED
Terminals and Ports
Bottom
Release button
(page E-31)
VIDEO OUT terminal
(page E-116)
DIGITAL terminal
(page E-116)
Tripod screw hole
W
T
O N / O F F
W E P R O
PUSH
OPEN
USB VIDEO OUT DIGITAL
DC IN 6V
DC IN 6V terminal
(page E-35)
USB port
(page E-116)
Battery compart-
ment cover
(page E-31)
Open Terminal Panel Cover
Download from Www.Somanuals.com. All Manuals Search And Download.
E-20
GETTING ACQUAINTED
Lens
A
The swivel lens mechanism lets you easily aim at the angle
you want, without changing the position of the camera body.
Changing the Lens Angle
B
A ....Image displayed
when recording
B ....Display of
recorded image
IMPORTANT!
• Do not use undue force when rotating the lens mecha-
nism and never try to force it past the point where rota-
tion stops naturally. Rough handling can cause the
lens mechanism to break and other damage to the
camera.
• The proper orientation of the lens when you store the
camera in its case depends on your camera model.
* QV-2300UX: Lens should be pointed forward.
• Whenever you swivel the lens so it is pointing in the direc-
tion of the back of the camera, the image on the monitor
screen is automatically adjusted so it shows a mirror image
of what it picked up by the lens. This makes self-portrait
images appear with the correct orientation when viewed on
a display.
* QV-2800UX: Lens should be pointed up.
• Never set the camera down while the lens is pointed
downwards. Doing so can cause bending or other
damage to the area around the lens.
• Always leave the lens cap on the lens except when
you are actually recording images.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-21
GETTING ACQUAINTED
• Wide Conversion Lens LU-8W: 0.7X
Installing a Conversion Lens
• Focusing distance when installed
QV-2300UX/QV-2800UX: Approximately 1cm to ∞
Optionally available conversion lenses change the focal dis-
tance, which provides enhanced telephoto or wide-angle ca-
pabilities. The method you should use to install a conversion
lens depends on your camera model.
• QV-2300UX: You must install an optionally available lens
adaptor (LU-8A) in order to use a conversion lens or a com-
mercially available lens filter.
Wide
Conversion
Lens (LU-8W)
Conversion
Lens Adaptor
(LU-8A)
• QV-2800UX: A conversion lens or a commercially avail-
able lens filter can be installed directly, without an adaptor.
• Tele Conversion Lens LU-8T: 1.5X
• Focusing distance when installed
QV-2300UX: Approximately 1m to ∞
QV-2800UX: Approximately 2.5m to ∞
QV-2300UX
QV-2800UX
Tele
Conversion
Lens (LU-8T)
Conversion
Lens Adaptor
(LU-8A)
QV-2300UX
QV-2800UX
Download from Www.Somanuals.com. All Manuals Search And Download.
E-22
GETTING ACQUAINTED
IMPORTANT!
• Be sure to use the Conversion Lens Adaptor when-
Filters
• The designs of some filters can cause shadows around the
periphery of the image.
• Auto focus and flash may not produce desired results while
a filter is on the lens.
• Filters do not produce exactly the same results as those
obtained with a film-based camera.
• Do not use multiple filters in combination.
ever you install a conversion lens or filter. If you don’t,
the lens will come into contact with the conversion
lens or filter when it extends from the camera, result-
ing in malfunction. (QV-2300UX only)
• Flash is disabled while a conversion lens is being used.
• Setting the camera to wide-angle zoom while the Tele
Conversion Lens causes shadows around the periph-
ery of the image. This is because the frame of the at-
tached filter or lens blocks some of the light coming
into the lens. Because of this, you should always use
telephoto zoom whenever you are using the Tele Con-
version Lens.
• The effects of hand shake are magnified while the
Tele Conversion Lens is being used. Whenever you
are using a conversion lens, install the cushion that
comes with it and mount the camera on a tripod so it is
secure.
• Due to certain characteristics of the Wide Conversion
Lens, you may notice some slight distortion in images
recorded with it installed.
Lens Precautions
• Fingerprints, dust, or any other soiling of the lens can inter-
fere with proper image recording. Never touch the lens with
your fingers. You can remove dust particles from the lens
surface by using a lens blower to blow them off. Next, wipe
the surface of the lens with a soft lens cloth.
• The lens of this camera extends from its body when you
turn on power and retracts when you turn off power. Take
care not to subject the lens to undue force or impact, and
never set the camera face down so the lens is in contact
with a tabletop, etc. Be sure to remove the lens cap before
turning on the camera.
• Make sure that
(Macro Mode) is selected as the
focus mode whenever you are using the Wide Conver-
sion Lens.
• Note that optical zoom is restricted a shown below in
• Never remove the camera’s batteries or unplug its AC
adaptor while the lens is extended. Doing so leaves the
lens extended, and creates the risk of lens damage.
the Macro Mode
.
* QV-2300UX: 1X fixed (QV-2300UX)
* QV-2800UX: 1X to 1.6X (QV-2800UX)
• Use of the flash while a commercially available lens
hood is installed may not produce desired results.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-23
GETTING ACQUAINTED
Monitor Screen Indicators
The following describes the different indicators and markings that appear on the camera’s monitor screen.
REC mode
Focus Mode indicator
None Auto Focus
Macro
Self-timer
10 SEC, 2 SEC
Recording Mode indicator
Zoom factor
Memory capacity
Infinity
Manual Focus
(Remaining number of storable images)
Flash Mode indicator
None Auto
Image size
1600 x 1200 pixels
800 x 600 pixels
Spot metering
indicator
Flash Off
Flash On
Quality
FINE, NORMAL, ECONOMY
Red-eye reduction
•
Flash indicator indicates
that the flash will fire
(when auto flash is
selected).
Camera shake
indicator
Image information
Movie Recording: recording time
........... seconds
Panorama: number of images
........... P1 to P10
Aperture value
Shutter speed value
Date and time
Battery capacity
•
An out of range
aperture or shutter
speed causes the
corresponding monitor
screen value to turn
yellow.
This information appears for one or
two seconds, and then disappears.
EV value
Auto Focus frame
•
•
Focusing complete: Green
Focusing failed: Red
The recording mode, memory capacity, image size, quality, and battery
capacity indicators do not appear on the REC mode monitor screen when
the “Indicators” option is turned off (page E-113).
No memory card loaded
warning
Download from Www.Somanuals.com. All Manuals Search And Download.
E-24
GETTING ACQUAINTED
■ Screen when SHIFT INFO is pressed
PLAY mode
SHIFT
INFO
MF
Folder name
Image protection indicator
File number
SHIFT INFO button
Metering Mode indicator
(multi)
(center)
(spot)
Image size
Quality
Battery
capacity
White balance
(Auto)
The above indicators do not appear on the PLAY mode
monitor screen when the “Indicators” option is turned off
(page E-113).
(Daylight)
(Shade)
Exposure Mode indicator
(program AE)
(Tungsten)
(Fluorescent)
(Manual)
(aperture priority AE)
(shutter speed priority AE)
(manual)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-25
GETTING ACQUAINTED
■ Screen when SHIFT INFO is pressed
White balance Flash Mode indicator
Operation Indicator Lamp
The Operation lamp shows the operational status of the
camera as described below.
SHIFT
INFO
MF
Aperture
value
Folder name
File number
Operation lamp
Shutter
speed
value
Metering Mode
indicator
Exposure Mode
indicator
Recording Mode
indicator
IMPORTANT!
• The above indicators may not appear when viewing
images recorded using a different digital camera
model.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-26
GETTING ACQUAINTED
REC mode
PLAY mode
Lamp
Color
Lamp
Color
On
Flashing
Please Wait
On
Flashing
Please Wait
Green
Auto focus operation
complete
Green
–
(after power on)
(after power on)
Monitor screen
turned off due to
sleep state activation
Image store operation in
progress
Delete operation in
progress
Movie store operation in
progress
Image protection
operation in progress
Self-timer countdown in
progress
Making DPOF settings
Low battery
Low battery
Format operation in
progress
Format operation in
progress
Please Wait
Please Wait
(after power off)
(after power off)
Red
–
Memory card error
Amber
Red
Exposure warning
Cannot focus
Memory full
Flash is charging.
Memory card error
Memory card is not
formatted
Memory card is not
formatted
No memory card in the
camera
Data save error
Cannot charge the flash
• The camera is ready to record when the lamp is off.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-27
GETTING ACQUAINTED
Attaching the Strap
Using the Bundled Accessories
Attach the strap as shown in the illustration below.
Using the Lens Cap
Always keep the lens cap on the lens whenever you are not
using the camera.
Large loop
Small loop
IMPORTANT!
• Be sure to keep the strap around your wrist when us-
ing the camera to protect against accidentally drop-
ping it.
Ring
Cap holder
• The supplied strap is intended for use with this camera
only. Do not use it for any other application.
• Never swing the camera around by the strap.
Attach the lens cap holder to the ring. This protects against
accidental loss of the lens cap.
■ QV-2300UX Users
• Be sure to turn off camera power and let the lens retract
into the camera before attaching the lens cap.
• Never turn on camera power with the lens cap affixed to the
lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-28
GETTING ACQUAINTED
■ QV-2800UX
Using the Soft Case
Attach the neck strap to the ring on the soft case as shown
Keep the camera in its soft case to protect it when not in use.
in the illustration.
■ QV-2300UX
Soft case
Ring
A pocket is provided inside the case
for memory card storage. To insert a
memory card, open the flap of the
pocket and slide the card into it.
Flap
Soft case strap
Use the buckle on the soft case strap to adjust the length of
the soft case strap.
Monitor screen
facing down
IMPORTANT!
• Never put any other objects besides the camera into
the soft case.
Buckle
Download from Www.Somanuals.com. All Manuals Search And Download.
E-29
GETTING ACQUAINTED
Flap
IMPORTANT!
• Never put any other objects besides the camera into
A pocket is provided
inside the case for
memory card storage.
To insert a memory
card, open the flap of
the pocket and slide
the card into it.
the soft case.
• The strap that comes with the camera is intended for
use with the soft case only. Never use it for any other
purpose.
• Never swing the camera around by the soft case
strap.
• Handing the camera from your neck by the soft case
strap creates the risk of damage to the camera by
striking surrounding objects, and the risk of personal
injury due to the camera being caught in a door, etc.
• Keep the soft case out of the reach of small children.
The soft case strap can become wound around the
next and create the risk of personal injury.
When inserting the camera into the soft case, make sure the
lens is facing upwards and the monitor screen is facing in the
direction shown in the illustration.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-30
GETTING ACQUAINTED
1. While holding down the re-
Power Requirements
lease button on the battery
compartment cover (on the
bottom of the camera),
slide the cover in the direc-
tion indicated by the arrow
in the nearby illustration
and open the cover.
PUSH
Your camera features a two-way power supply that lets you
use either AA-size batteries or household AC current.
A set of AA-size alkaline batteries is supplied with the cam-
era. The other items listed below are available separately.
■ Batteries
• Four AA-size alkaline batteries: LR6
• Four AA-size lithium batteries: FR6
• Four AA-size nickel metal hydride rechargeable batteries:
NP-H3
2. Load batteries with their
+/- ends facing as
shown in the nearby
illustration.
■ Household Current
• AC Adaptor: AD-C620
• AC Adaptor/Charger: BC-3HA
Loading Batteries
Make sure that camera power is turned off whenever loading
or replacing batteries.
3. While holding down the
release button, slide the
battery compartment
cover back to its original
position to close it.
IMPORTANT!
• Never use manganese batteries. Use only the battery
types specifically mentioned in this User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-31
GETTING ACQUAINTED
● Battery Life Guidelines
Recording one image per minute under the above conditions
reduces battery life to about one sixth of that noted above.
Battery life is greatly affected by how much you use flash,
zoom and other functions, and how long you leave power
turned on.
The battery life guideline values given below indicate the
amount of time at standard temperature (25°C) until power
automatically turns off due to battery failure. They do not
guarantee that batteries will provide the amount of service
indicated. Low temperatures and continued use reduce bat-
tery life.
● Tips for Prolonging Battery Life
• Use the
using it.
button to turn off the flash when you are not
Type of
Operation
AA-size Alkaline AA-size Lithium AA-size Ni-MH
Batteries LR6
Batteries FR6
Batteries NP-H3
• You can also use the power save settings (page E-36) to
protect against wasting battery power when you forget to
turn off the camera.
Continuous
Playback
170 minutes
300 minutes
180 minutes
Continuous
Recording
80 minutes
(480 shots)
200 minutes
(1200 shots)
120 minutes
(720 shots)
● Alkaline Battery Life
• The above figures are approximations only.
• The above guidelines are based on the following battery
types:
Alkaline: MX1500 (AA) DURACELL ULTRA
Lithium: Energizer
* Battery life varies with brand.
The actual life of alkaline batteries is affected by a variety of
factors, including the battery manufacturer, the amount of
time the batteries spend in storage before you use them,
temperature while you are recording, and photographic con-
ditions. As a rule, we recommend the use of lithium batteries
or Ni-MH batteries, which have longer lives than alkaline bat-
teries.
• Figures are based on continuous recording under the fol-
lowing conditions.
Flash turned off
One zoom slider switching between T (Telephoto) and W
(Wide-angle)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-32
GETTING ACQUAINTED
The following examples show how alkaline battery life
changes under different conditions.
● About rechargeable batteries
Use only the nickel-metal hydride batteries (NP-H3) that are
available from your dealer as options for this camera. Proper
camera operation is not guaranteed when other recharge-
able batteries are used.
photographic conditions
shooting conditions
Example 1: Intermittent use of the camera shortens battery
life.
AC Adaptor/Charger : BC-3HA
Nickel-metal hydride batteries (4-battery set)/Quick
Charger Set : BC-1HB4
Nickel-metal hydride batteries (4-battery set) : NP-H3P4
Conditions
• Temperature: 25°C
• Repeat of a cycle of recording of one shot per minute
for 10 minutes, followed by one minute of playback,
and a nine minutes of power off (power on, full lens
extention, half lens contraction, full lens extension,
image recording, power off)
IMPORTANT!
• Be sure to keep all four batteries together as a set at
all times, for both charging and powering the camera.
Mixing batteries from different sets can shorten overall
battery life and cause malfunction of the camera.
• Rechargeable batteries cannot be charged while they
are loaded in the camera.
• Flash on
Approximate Battery Life: 50 minutes (46 shots)
Example 2: Low temperatures shorten battery life.
Conditions
• Temperature: 0°C
• Repeat of a cycle of recording of one shot per minute
for 10 minutes, followed by one minute of playback,
and a nine minutes of power off (power on, full lens
extention, half lens contraction, full lens extension,
image recording, power off)
• Flash on
Approximate Battery Life: 12 minutes (11 shots)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-33
GETTING ACQUAINTED
• Dead batteries are susceptible to leakage, which can
Battery Handling Precautions
cause serious damage to your camera. Remove batteries
from the camera as soon as you notice they are dead.
• The batteries that power the camera normally become
warm as they discharge.
Incorrect use or handling of batteries can cause them to leak
or burst and create the danger of serious damage to your
camera. Be sure to note the following important precautions
to avoid problems with batteries.
• Use only LR6 (AM-3) type alkaline or FR6 type
lithium or Ni-MH (nickel-metal hydride) dry cell
batteries with this camera. Never mix old bat-
teries with new ones. Doing so can result in
bursting or leaking of batteries, creating the
danger of fire or personal injury.
Low Battery Indicator
The following shows how the battery capacity indicator on
the monitor screen and the indicator display changes as bat-
tery power is used. Replace all four batteries as soon as pos-
sible after they go dead. If you continue to use the camera
CAUTION
• Always make sure that the plus (+) and minus
while the battery level is
matically turn off.
or
, camera power will auto-
(–) ends of the batteries are facing correctly, as
noted by the markings on the camera itself.
Improper loading of batteries can result in
bursting or leaking of batteries, creating the
danger of personal injury or soiling of objects
nearby.
Battery
High
Low
Capacity
Monitor
Screen
• Remove batteries from the camera if you do not plan to use
it for more than two weeks.
• Never recharge batteries, never allow direct connection
between two ends of a battery, and never try to take batter-
ies apart.
• Do not expose batteries to direct heat or dispose of them
by burning. Doing so can create the danger of explosion.
• Never mix batteries of different types.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-34
GETTING ACQUAINTED
AC Adaptor precautions
Using AC Power
• Never use an electrical outlet whose voltage is
outside the rating marked on the AC adaptor.
Doing so can create the danger of fire or elec-
trical shock. Use only the optional AC adaptor
specified for this camera.
Use the adaptor as shown below to power the camera from a
household power outlet.
DC IN 6V
(AC power terminal)
• Do not allow the AC adaptor power cord to be-
come cut or damaged, do not place heavy ob-
jects on it, and keep it away from heat. A dam-
aged power cord creates the risk of fire and
electrical shock.
AC Adaptor
• Never try to modify the AC adaptor power cord,
or subject it to severe bending, twisting, or pull-
ing. Doing so creates the risk of fire and elec-
trical shock.
CAUTION
• Never touch the AC adaptor while your hands
are wet. Doing so creates the risk of electrical
shock.
• AC Adaptor: AD-C620 (Option)
• Do not overload extension cords or wall out-
lets. Doing so creates the danger of fire and
electrical shock.
• Should the cord of the AC adaptor become
damaged (exposed internal wiring), request a
replacement from an authorized CASIO ser-
vice provider. A damaged AC adaptor cord
creates the danger of fire or electrical shock.
• AC Adaptor/Charger: BC-3HA (Option)
The BC-3HA functions both as an AC adaptor and as a
charger unit for AA-size nickel metal hydride batteries. It
comes complete with four rechargeable nickel metal hy-
dride batteries. This AC adaptor/charger unit can be used
with any household power outlet rated for 100V to 240V
AC.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-35
GETTING ACQUAINTED
• Be sure to turn off power before connecting or disconnect-
ing the adaptor.
Turning the Camera On and Off
Sliding the POWER ON/OFF switch
• Always turn camera power off before disconnecting the AC
adaptor, even if the camera has batteries installed. If you
don’t, the camera will turn off automatically when you dis-
connect the AC adaptor. You also run the risk of damaging
the camera whenever you disconnect the AC adaptor with-
out first turning power off.
to the right toggles camera power on
POWER
ON/OFF
and off.
POWER ON/OFF
• The AC adaptor may become warm to the touch after ex-
tended periods of use. This is normal and is not cause for
alarm.
• After using the camera, turn it off and unplug the adaptor
from the AC outlet.
• The camera automatically switches over to AC adaptor
powered operation whenever the AC adaptor is plugged
into the camera.
Power Save Settings
The settings described below let you specify sleep and auto
power off trigger times that help to conserve valuable battery
power.
AUTO POWER OFF
Auto Power Off turns off camera power if no operation is
performed for five minutes in the PLAY mode. In the REC
mode, you can specify an Auto Power Off trigger time of
two or five minutes.
• Always use the AC adaptor to power the camera whenever
it is connected to a computer.
SLEEP
The monitor screen enters a sleep state if no operation is
performed for a specified amount of time in the REC mode.
Pressing any button immediately wakes up the monitor and
restores normal operation. You can specify 30 seconds, 1
minute, or 2 minutes before the sleep state is triggered, or
you can turn off this setting entirely.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-36
GETTING ACQUAINTED
• In the PLAY mode, Auto Power Off trigger time is fixed
To power save settings
at five minutes.
• Sleep is disabled in the PLAY mode.
1. Turn on the camera and slide the REC/PLAY
selector to “REC”.
• Performing any button operation while the monitor is
asleep immediately wakes it up and restores normal
operation.
2. Press MENU.
• The Auto Power Off setting is given priority if you have
“2 min” set for both Sleep and Auto Power Off. This
means that the camera turns off if you do not perform
any operation for about two minutes in the REC mode.
3. Use [+] (down) and [–] (up) to select “FUNC-
TION”, and then press the shutter release but-
ton.
• Auto Power Off is automatically disabled when under
any one of the following conditions.
4. Use [+] (down) and [–] (up) to select the item
whose settings you want to change, and then
press the shutter release button.
— While a slideshow is playing
— When you are performing operations on a com-
puter, printer, or other external device connected
to the camera’s DIGITAL terminal or USB port.
• To make auto power off settings, select “Auto Power
Off”.
• To make sleep settings, select: “Sleep”.
— While the AC adaptor is connected to the camera
5. On the screen that appears, use [+] and [–] to
make the setting you want, and then press the
shutter release button.
Auto power off settings: “2 min” “5 min”
Sleep settings: “Off” “30 sec” “1 min” “2 min”
Download from Www.Somanuals.com. All Manuals Search And Download.
E-37
GETTING ACQUAINTED
Side marked arrow
should face the front
side of the camera!
2. As shown in the
Memory Cards
illustration, slide the
memory card into the
slot and push it in as
far as it will go.
This camera uses a memory card (CompactFlash <CF
TYPE I/II> card or microdrive) for image storage.
IMPORTANT!
• If the Eject button is
extended, press it in
before sliding the
memory card into the
slot.
• Make sure that the power of the camera is turned off
before you insert or remove a memory card.
• When inserting a memory card into the camera, make
sure that the card is oriented correctly. Make sure that
the correct side of the card is facing up, and that you
insert the correct end of the card into the camera.
Eject button
Side marked
with arrow
3. Close the memory card
slot cover.
Inserting a Memory Card into the Camera
1. Open the memory card
slot cover.
Memory card slot cover
Download from Www.Somanuals.com. All Manuals Search And Download.
E-38
GETTING ACQUAINTED
5. Close the memory card
Removing a Memory Card from the Camera
slot cover.
1. Open the memory card
slot cover.
IMPORTANT!
• Insert only memory cards into the memory card slot.
Inserting any other type of card can cause malfunc-
tion.
2. Press the eject button
so it extends from the
camera.
• Should water or any other foreign matter get into the
memory card slot, immediately turn off power, unplug
the AC adaptor, and contact your original retailer or
nearest CASIO Service Provider.
• Never eject the CompactFlash card while the card slot
is facing downwards. Doing so creates the danger of
the CompactFlash card falling, which can corrupt im-
age data on the card.
• Never remove the memory card from the camera
while the operation lamp or card access lamp is flash-
ing. Doing so can cause loss of recorded images or
corruption of memory card data.
Eject button
3. Press the eject button
once again to eject the
card.
4. Remove the memory
card.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-39
GETTING ACQUAINTED
• Use [+] and [–] to select each menu item, and press
Formatting a Memory Card
the shutter release button to advance to the next
menu.
You can format a memory card to delete all of the data
stored on it.
3. In response to the confirmation message that
appears, use [+] and [–] to select “Yes” to for-
mat or “No” to exit, and then press the shutter
release button.
IMPORTANT!
• Formatting a memory card deletes all images on the
card, even if some or all of the images are protected
(page E-107).
• Data deleted by a memory card format operation can-
not be recovered! Be sure to carefully check and con-
firm that you no longer need the data stored in a
memory card before formatting it.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
2. Select “Format” using one of the following two
key operations, and then press the shutter re-
lease button.
If you are here
REC mode
Select this on the menu screen
“FUNCTION” “SET UP” “Format”
“SET UP” “Format”
PLAY mode
Download from Www.Somanuals.com. All Manuals Search And Download.
E-40
GETTING ACQUAINTED
• Formatting is recommended for any memory card that you
Memory Card Precautions
suspect contains corrupted image data (due to a DECODE
ERROR, strange image colors, malformed images) or
newly purchased memory cards.
• Images cannot be recorded with this camera unless a
memory card is installed in it.
• Be sure to use only CASIO brand CompactFlash cards.
Proper operation with other memory cards is not guaran-
teed.
• Before starting a format operation, load a full set of new
batteries (alkaline or lithium) into the camera or connect
the AC adaptor to power the camera. Interruption of cam-
era power during the format operation results in improper
formatting, making it impossible to use the memory card.
• Static electricity, electrical noise, and other electrical phe-
nomena can cause corruption or even total loss of the data
stored on a memory card. Because of this, you should al-
ways make backup copies of important images on other
media (magnetic optical disk, floppy diskette, computer
hard disk, etc.).
IBM Microdrive Precautions
Compatibility of the camera with the IBM microdrive has
been confirmed by CASIO. However, you should note the
following important points whenever using the IBM
microdrive.
• Memory card problems can be corrected by reformatting
the memory card. Reformatting a memory card deletes all
images stored on the card, but you can use a computer to
copy the images you want to keep to the computer’s hard
disk before reformatting your card. If you plan to be record-
ing images where you do not have access to a computer, it
is a good idea to take along an extra memory card or two
just in case you experience an unexpected memory card
problem.
• Be sure to carefully read all of the documentation that
comes with the microdrive before using it.
• Note that the microdrive becomes hot during normal use.
Take care when removing it from the camera.
• Take care to avoid strong pressure on the label side of the
microdrive when it is removed from the camera. Strong
pressure can damage internal components and cause mal-
function.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-41
GETTING ACQUAINTED
• Never turn off camera power or subject the camera to im-
pact while the card access lamp is flashing. Doing so can
cause malfunction of the microdrive.
In case of microdrive malfunction....
• Contact your original microdrive retailer or the contact
point noted in the microdrive documentation.
• CASIO does not provide any servicing or maintenance
support for the microdrive.
• Note that CASIO assume no responsibility for any data
loss you may suffer while using the microdrive.
• This camera supports use of both a CompactFlash card
and the microdrive. Note, however, that ejecting a
microdrive from the camera is relatively more difficult than
ejecting a CompactFlash card.
• The microdrive is a very high precision device. Dropping
the camera can result in malfunction of the microdrive,
even though the camera is undamaged. Take extra care
when handling the camera while the microdrive is installed.
• The microdrive has very large storage capacity. Because
of this, certain operations can take a relatively long time to
perform.
• The microdrive may not operate properly in areas where
barometric pressure is low. Because of this, you should
avoid using it at high altitudes.
• A microdrive consumes much more electrical power than a
CompactFlash card. Depending on how a microdrive is
used, it can greatly reduce battery life. When using alkaline
batteries, certain operating conditions and certain battery
brands can result in batteries going dead right after you
install new ones. Whenever using a microdrive, we recom-
mend that you use rechargeable nickel metal hydride bat-
teries or lithium batteries to power the camera.
• When battery power is low, the amount of time required
between shots may become longer. This longer interval is
designed to protect the microdrive.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-42
GETTING ACQUAINTED
Example Displays
Menu Screens
Pressing MENU displays the menu screen. The contents of
the menu screen depend on whether you are in the PLAY
mode or REC mode. The following procedure shows opera-
tion in the REC mode as an example.
REC mode, page 1
Items
1. Slide the POWER ON/OFF switch to the right to
turn on the camera.
2. Slide the REC/PLAY selector to “REC”.
On-screen guidance
REC mode FUNCTION menu, page 2
• To perform a menu operation in the PLAY mode, slide
the REC/PLAY selector to “PLAY”.
3. Press MENU.
4. Use [+] and [–] to select the item you want, and
then press the shutter release button.
Items
• Make setting in accordance with the guidance mes-
sages that appear on the monitor screen.
[+] [–]: Item selection, page scrolling
On-screen guidance
Shutter release button: Applies displayed setting
MENU: Returns to previous screen
• Pressing the
button is sometimes required to exit
certain setting screens.
• See the “Camera Menus” on page E-136 for more informa-
tion about menu contents.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-43
GETTING ACQUAINTED
Setting the Date and Time
Setting the Current Date and Time
Use the following procedures to set the current date and
time, and to select the date format.
When you record an image, the time and date the image was
shot is registered in accordance with data from the camera’s
built-in clock. You can even use the time stamp function to
“stamp” the date and time inside the image.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
2. Press MENU.
3. Select “Date/Time” using one of the following
two key operations, and then press the shutter
release button.
IMPORTANT!
• The time and date settings are cleared if the camera is
left for about 24 hours without battery and AC power
being supplied. If this happens, restore power and
make new time and date settings before using the
camera again.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Date/Time”
PLAY mode
“Date/Time”
• A flashing time display indicates that the time and date
(clock) settings have been cleared. Use the procedure
on this page to make the correct time and date set-
tings.
• Use [+] and [–] to select each menu item, and press
the shutter release button to advance to the next
menu.
• If you do not set the camera’s built-in clock to the cur-
rent date and time, all images are recorded with the
default date and time, which probably is not your cor-
rect current date and time. Be sure to correctly set the
clock before you use the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-44
GETTING ACQUAINTED
4. Select and change the digits on the screen to
Selecting the Date Format
You can use the following procedure to select one of the
three different date formats.
set the current date and time.
1. Turn on the camera, and then use the REC/
PLAY selector to select either “REC” or
“PLAY”.
Green
marker
2. Press MENU.
3. Select “Date Style” using one of the following
two key operations, and then press the shutter
release button.
Shutter release button: Moves the green marker.
[+] / [–]: Increases and decreases the currently selected
digit.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Date Style”
5. Press
to apply your settings.
PLAY mode
“Date Style”
• Use [+] and [–] to select each menu item, and press
the shutter release button to advance to the next
menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-45
GETTING ACQUAINTED
4. Use [+] and [–] to select the setting you want to
1. Turn on the camera and then slide the REC/
PLAY selector to “REC”.
use, and then press the shutter release button
to apply it.
2. Press MENU.
Example: October 18, 2000
3. Select “FUNCTION” “Time Stamp”, and then
press the shutter release button.
Year/Month/Day: 00/10/18
Day/Month/Year: 18/10/00
Month/Day/Year: 10/18/00
4. Use [+] and [–] to select the setting you want,
and then press the shutter release button to
apply it.
Time Stamp
When it is turned on, the time stamp function digitally stamps
the recording date and time in the lower right corner of each
image as it is recorded. Note that once an image is stamped,
the date and time cannot be deleted.
Example:
Date: October 18, 2000
Time: 1:25pm
Off : No time stamping
2000/10/18 : Year/Month/Day
18 1:25pm : Day Hour:Minutes
2000/10/18 1:25pm : Year/Month/Day Hour:Minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
E-46
BASIC IMAGE RECORDING
This section describes the basic procedure for recording an
image.
4. Compose the image on the monitor screen so
the point on which you want to focus is inside
the Focus frame.
Recording a Simple Snapshot
The camera’s Program AE Mode (P Mode) is for simple
snapshots. In this mode, the camera automatically sets the
shutter speed and aperture for you in accordance with sub-
ject brightness.
Focus
frame
1. Before turning on the camera, remove its lens
cap.
5. Press the shutter
release button about
half way and hold it
there to perform auto
2. Slide the POWER ON/
POWER
ON/OFF
OFF switch to the right
to turn on the camera.
focus.
Shutter release button
POWER ON/OFF
3. Slide the REC/PLAY
selector to “REC”.
REC
REC : REC mode for
recording images
PLAY : PLAY mode for
playing back
PLAY
REC/PLAY
images
Download from Www.Somanuals.com. All Manuals Search And Download.
E-47
BASIC IMAGE RECORDING
• Recorded images are temporarily stored in a buffer,
• You can find out the
status of the Auto Focus
operation by checking the
color of the focus frame
and the status of the
operation lamp.
SHIFT
INFO
MF
from which they are stored to the memory card in-
stalled in the camera. You can continue to store im-
ages as long as there is space available in the buffer.
• The number of images you can store in the camera
depends on the storage medium and the image quality
setting (page E-59) you are using.
Operation lamp
If you see this
It means this
• To avoid hand movement, press the shutter release
button gently.
Green focus frame and green
operation lamp
The image is in focus.
• Use of a tripod is recommended for slow shutter
speeds and telephoto shots to avoid blurring of the
image due to camera movement.
Red focus frame and red
operation lamp
The image is not in focus.
• Take care that you do not
block the lens or the
■ Camera Shake Indicator
sensors with your fingers
as you hold the camera.
The
(camera shake indicator) appears on the monitor
screen when the zoom slider is set to T (telephoto) or when a
slow shutter speed is being used.
• If the camera shake indicator
the wired remote controller to avoid camera movement.
appears, use a tripod and
6. After confirming that
the image is in focus,
press the shutter
release button all the
way down to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-48
BASIC IMAGE RECORDING
■ Fixed Focusing Distances
About the REC Mode Monitor Screen
• The following are the fixed focusing distances when Auto
Focus is unable to focus properly.
• The image shown on the monitor screen in the REC mode
is a simplified image for composing purposes. The actual
image is recorded in accordance with the image quality
setting currently selected on your camera. The image re-
corded on the memory card has much better resolution and
detail than the REC mode monitor screen image.
• Certain levels of subject brightness can cause the re-
sponse of the REC mode monitor screen to slow down,
which causes some static noise in the monitor screen im-
age.
Well-lit Location: 1.5 meters minimum
With Flash
: Approximately 2 meters
• Depending on actual conditions, a green operation indica-
tor and focus frame do not necessarily guarantee that the
image is in focus.
Recording Precautions
• Never open the battery compartment cover, disconnect the
AC adaptor from the camera, or unplug the adaptor from
the wall socket while the operation lamp and the card ac-
cess lamp are flashing green. Doing so will not only make
storage of the current image impossible, it can also corrupt
other image data already stored on the camera’s memory
card.
About Auto Focus
Auto Focus tends not to work well with the following types of
subjects. If you experience problems with obtaining good
results with Auto Focus, try using manual focus (page E-57).
• Solid color walls or objects with little contrast
• Strongly backlit objects
• Never remove batteries, unplug the AC adapter, or remove
the memory card while the camera is saving images.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.
• Polished metal or other brightly reflective objects
• Venetian blinds or other horizontally repeating patterns
• Multiple images that are varying distances from the camera
• Subjects in poorly lit areas
Auto Focus also may not work properly when the camera is
unsteady or shaking.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-49
BASIC IMAGE RECORDING
Image Recording when the Battery is Low
Using Zoom
To protect against unexpected loss of image data, images
are recorded one-by-one whenever the battery level is indi-
Your camera is equipped with both optical zoom and digital
zoom capabilities.
cated as
save.” appears on the monitor screen during the save opera-
tion under this condition. As long as you do not press
or lower. The message “Press
to cancel
Using Optical Zoom
,
the save operation continues and takes a few seconds to
complete. Be sure to replace all four batteries as soon as
possible after this message starts to appear.
Optical zoom enlarges the image by changing the focal dis-
tance of the lens. The optical zoom range depends on your
camera model.
• QV-2300UX: 1X to 3X
• QV-2800UX: 1X to 8X
Pressing
while the “Press
to cancel save.” is on
the monitor screen cancels the image save operation.
• If you have a microdrive loaded in the camera, the above
message appears whenever the battery level is indicated
1. Enter the REC mode.
Zoom slider
as
or lower.
2. Move the zoom slider to-
W
T
• The message “Press
to cancel save.” also appears
wards T (telephoto) to zoom
in on the subject, or W (wide-
angle) to zoom out.
momentarily during save operations in the Panorama
Mode and Movie Mode. In this case, this message does not
indicate that battery power is low.
REC
PLAY
T (TELE): Telephoto
W (WIDE): Wide-angle
W (WIDE)
T (TELE)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-50
BASIC IMAGE RECORDING
NOTES
• Changing the optical zoom factor also affects the lens
4. Select the setting you want, and then press the
shutter release button to apply it.
aperture value.
To do this
Select this
Off
• The lens aperture value indicated on the camera is the
aperture when optical zoom is 1X. Using a higher opti-
cal zoom setting results in a higher aperture value
(smaller aperture).
• Use of a tripod is recommended for telephoto shots to
avoid blurring of the image due to camera movement.
Turn off digital zoom
Toggle between 2X and 4X digital zoom
whenever the zoom slider is slid to the
maximum T (telephoto) setting.
Auto
Always use 2X digital zoom
Always use 4X digital zoom
X2
X4
Using Digital Zoom
With digital zoom, you can enlarge the image on the monitor
screen by zoom factors of 2X or 4X before storing it.
• A frame appears on the monitor screen whenever 4X
digital zoom is in use. Only the area of the image
within the frame is recorded, with the resulting image
measuring 800 x 600 pixels.
• 4X digital zoom is not available in the Movie Mode and
Panorama Mode.
1. Enter the REC mode.
2. Press MENU.
• 2X and 4X digital zoom are disabled while the compo-
sition outline is displayed in the Scene Mode.
3. Select “FUNCTION”
“Digital Zoom”, and
then press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-51
BASIC IMAGE RECORDING
• Each press of
cycles through the available flash
Using the Flash
modes described below.
The following describes various flash settings you can make
to suit the type of image you are trying to record.
To do this
Select this setting
No display
Have the flash fire automatically
when required (Auto Flash)
1. Enter the REC mode.
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
2. Press
to cycle
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye Reduction)
SHIFT
INFO
MF
through the available
flash modes until the
indicator for the one
you want is on the
monitor screen.
Flash
mode
Download from Www.Somanuals.com. All Manuals Search And Download.
E-52
BASIC IMAGE RECORDING
Flash Status Indicators
Adjusting the Flash Intensity
You can check the current flash unit status by checking the
monitor screen indicator and operation lamp while the shut-
ter release button is pressed about half way down.
Use the following procedure to adjust the intensity of the
flash when it fires.
1. Enter the REC mode.
2. Press MENU.
SHIFT
INFO
MF
3. Select “FUNCTION”
“Flash Intensity”, and
then press the shutter release button.
Operation lamp
4. Select the setting you want, and then press the
shutter release button to apply it.
■ Operation lamp
To do this
Select this setting
Strong
If the operation lamp is doing this
Flashing amber
It means this
Fire the flash with strong intensity
Fire the flash with normal intensity
Fire the flash with weak intensity
Flash unit is charging
Normal
Flash unit cannot be
charged for some reason
Weak
Flashing red
■ Monitor screen
When you have Auto Flash or Red-Eye Reduction selected
as the flash mode, the indicator appears on the display
when you press the shutter release button about half way
down to indicate that available light is insufficient and the
flash will be fired.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-53
BASIC IMAGE RECORDING
• The flash unit does not charge when battery power is too
low to charge the flash. The (Flash Off) indicator ap-
pears to warn you that the flash will not fire correctly, which
may affect exposure of the image. Replace batteries as
soon as possible when this happens.
Precautions when Using Flash
• Make sure that you do not touch or block the flash or the
exposure sensor with your fingers. Doing so can soil these
components and interfere with correct flash operation.
• Red-eye reduction
is not pointed directly at the subject or when the subject is
far from the camera.
may not work well when the camera
Flash
Flash
QV-2300UX
QV-2800UX
• In the Red-eye Reduction Mode
, the flash is fired auto-
matically in accordance with exposure. Because of this,
the flash does not fire if the subject is well-lit.
• White balance is fixed while the flash is being used, so sun-
light, fluorescent lighting, or other sources of illumination in
the immediate area may affect the coloring of the recorded
image.
Exposure sensor
Exposure sensor
• The effective range for the built-in flash depends on your
camera model.
* QV-2300UX: Approximately 0.5m to 2m (at full aperture)
* QV-2800UX: Approximately 0.5 to 2.5m (at full aperture)
Note that you may not be able to obtaine the desired flash
result outside the ranges noted above.
• Depending on operating conditions (type of batteries being
used, temperature, etc. ), it may take up to 10 seconds for
the flash unit to charge.
• The flash is disabled during movie recording, which is indi-
cated by the
(Flash Off) icon on the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-54
BASIC IMAGE RECORDING
Using the Auto Focus Mode
Selecting the Focus Mode
As its name suggests, the Auto Focus Mode adjusts focus
automatically whenever you press the shutter release button
about half way down. The following shows the relationship
between optical zoom factor and the focusing distance for
Auto Focus.
You can use the following procedure to select from among
four different focus modes: Auto Focus, Macro, Infinity, and
Manual Focus.
1. Enter the REC mode.
Optical Zoom Factor
Focusing Distance
10cm to ∞
50cm to ∞
40cm to ∞
1m to ∞
1X
3X
1X
8X
2. Press
cycle through the
to
QV-2300UX
QV-2800UX
SHIFT
INFO
MF
available focus mode
settings.
1. Press
to cycle through the focus
Focus
Mode
mode settings until there is no focus mode in-
dicator on the display. This indicates the Auto
Focus Mode.
2. Compose the image to the object you want
within the focus frame, and then press and
hold the shutter release button about half way
down.
Each press of
cycles through the focus
modes in the following sequence.
Auto Focus (no indicator) Macro (
Manual Focus (
)
Infinity
(
)
)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-55
BASIC IMAGE RECORDING
Using the Macro Mode
The Macro Mode automatically sets the focus for close-up
shooting. Focus adjustment starts automatically whenever
you press the shutter release button about half way down.
The following shows the relationship between optical zoom
factor and the focusing distance for the Macro Mode.
Focus
frame
Optical Zoom Factor
Focusing Distance
1cm to 50cm
QV-2300UX
QV-2800UX
1X
1 to 1.6X
1cm to 50cm
• You can find out the status of the Auto Focus opera-
tion by checking the color of the focus frame and the
status of the operation lamp.
1. Press
to cycle through the focus
indicator appears
mode settings until the
If you see this
It means this
on the display. This indicates the Macro Mode.
Green focus frame and green
operation lamp
The image is in focus.
2. Compose the image and record it.
Red focus frame and red
operation lamp
Auto Focus is not possible
for some reason.
• See “Using the Auto Focus Mode” on page E-55 for
information about how the camera focuses an image
automatically.
• You can check the current status by looking at the op-
eration lamp and focus frame. See “Using the Auto
Focus Mode” on page E-55 for more information.
3. Press the shutter release button the rest of the
way down to record the image.
IMPORTANT!
• The focusing range is the distance from the lens sur-
face to the subject.
• Optical zoom is disabled in the Macro Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-56
BASIC IMAGE RECORDING
Using the Infinity Mode
Using the Manual Focus Mode
The Infinity Mode sets the focus near infinity. It is a good
choice for scenery and other far-off subjects. Focus adjust-
ment starts automatically whenever you press the shutter
release button about half way down.
With Manual Focus, you make the required focus settings by
hand. The following shows the relationship between optical
zoom factor and the focusing distance for the Manual Focus
Mode.
Optical Zoom Factor
Focusing Distance
1cm to ∞
1. Press
to cycle through the focus
indicator appears
1X
3X
1X
8X
QV-2300UX
QV-2800UX
mode settings until the
50cm to ∞
1cm to ∞
1m to ∞
on the display. This indicates the Infinity
Mode.
2. Compose the image and record it.
1. Press
to cycle through the focus
indicator appears
• See “Using the Auto Focus Mode” on page E-55 for
information about how the camera focuses an image
automatically.
mode settings until the
flashing on the display. This indicates the
Manual Focus Mode.
• You can check the current status by looking at the op-
eration lamp and focus frame. See “Using the Auto
Focus Mode” on page E-55 for more information.
2. While the
indicator is flashing, use [+] and
[–] to focus the image.
• If you do not perform any focus operation for about
two seconds, the
indicator stops flashing.
• You can press
while the indicator is
on the monitor screen to change to another focus
mode, if you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-57
BASIC IMAGE RECORDING
3. Press the shutter release button to stop the
Using Focus Lock
Normally, Auto Focus automatically focuses on the object
that is inside the focus frame. Focus lock is a technique you
indicator flashing and fix the image focus at its
current level.
• After
stops flashing, you can use [+] and [–] to ad-
can use in the Auto Focus, Macro(
), and Infinity (
)
just exposure compensation (EV).
modes that lets you lock the focus on a subject and then
move the camera so the focus frame is pointed at another
subject when you record. This keeps the original subject in
focus, even though a different object is within the focus
frame.
• If
cus, press
stops flashing before you have a chance to fo-
to make it flash again.
4. Press the shutter release button to record the
image.
1. Align the focus frame with the subject you
want to lock on and press the shutter release
button half way down.
• The focus frame does not appear when you press the
shutter release button half way down while in the
Manual Focus Mode.
• The focus frame turns green when the image is in fo-
cus.
Focus frame
Download from Www.Somanuals.com. All Manuals Search And Download.
E-58
BASIC IMAGE RECORDING
2. While keeping the shutter release button de-
Specifying Image Size and Quality
pressed half way, move the camera and com-
pose the image as you want.
You can specify the image size and image quality to suit the
type of image you are recording.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION” “Size/Quality”, and then
press the shutter release button.
4. Select the size and quality setting you want,
and then press the shutter release button.
3. Press the shutter release button the rest of the
way down to record the image.
NOTE
■ Size/Quality Setting and Image Capacity
• Locking the focus also locks the exposure setting.
Number of images
Image
size
Quality
File size
8MB
64MB
340MB
Microdrive
(pixels)
memory card
memory card
1600
x
FINE
850KB
600KB
350KB
200KB
150KB
120KB
8
71
401
562
NORMAL
ECONOMY
FINE
11
19
33
43
53
99
1200
800
x
167
282
365
443
943
1587
2054
2494
NORMAL
ECONOMY
600
Download from Www.Somanuals.com. All Manuals Search And Download.
E-59
BASIC IMAGE RECORDING
IMPORTANT!
• The values in the table below are all approximate, and
Using the Self-timer
You can set the self-timer to either one of two starting times.
are affected by the types of images you record and
other factors.
• To determine the number of images that can be stored
on a memory card of a different capacity, multiply the
capacities in the table below, by the appropriate value.
• Note that the maximum number of images that can be
stored in a single folder is 250. Because of this, even
if you are using a card that allows storage of more
than 250 images, the camera’s monitor screen will
show its capacity for up to 250 images only.
• The number of images that can be recorded may differ
from the values shown above when you use Card
Browser (page E-130).
1. Enter the REC mode.
2. Press the
button
to select the self-timer
time you want.
SHIFT
INFO
MF
Self timer
Time
Self-timer Time Settings:
Each press of
cycles through the available self-
timer settings described below.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-60
BASIC IMAGE RECORDING
To do this
Select this setting
Exposure Compensation
Turn the self-timer off
No display
Whenever program AE, shutter speed priority AE, or aper-
ture priority AE is selected as the exposure mode, you can
adjust the exposure compensation value (EV value) within
the range shown below in order to compensate for current
lighting conditions. This setting can be used to obtain better
results when shooting with backlighting, indirect indoor light-
ing, a dark background, etc.
Record 10 seconds after the
shutter release button is pressed
10SEC
Record two seconds after the
shutter release button is pressed
2SEC
3. Press the shutter release button to start the
self-timer countdown.
EV Value Range: –2EV to +2EV
Steps: 1/3EV
• The seconds are counted down on the monitor
screen.
1. Select program AE, shutter speed priority AE,
or aperture priority AE as the exposure mode.
See page E-74.
• To stop a countdown part way through, press the shut-
ter release button.
NOTE
2. Use [+] and [–] to change the exposure com-
pensation value (EV shift).
• You can rotate the lens mechanism so the lens points
in the same direction as the camera’s monitor screen.
This makes it possible for you to watch the self-timer
countdown on the monitor screen.
• The current EV value is shown on the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-61
BASIC IMAGE RECORDING
3. After the EV value is the way you want, press
the shutter release button to record the image.
EV value
[+] : Increases the EV value. A higher EV value is best
for light colored subjects and backlit subjects.
IMPORTANT!
• When shooting under very dark or very bright condi-
tions, you may not be able to obtain satisfactory re-
sults even after performing exposure compensation.
• An EV value setting you make remains in effect until
you change it. To reset the EV value to zero, use [+]
and [–] to return the display value to zero, which is
indicated when
is not on the monitor screen. Note
that turning off the camera also resets the EV value to
zero.
• In the Panorama Mode, the exposure compensation
setting you make for the first image of the panorama is
fixed for all the other images.
[–] : Decreases the EV value. A lower EV value is best
for dark color subjects and for shooting outdoors
on a clear day.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-62
OTHER RECORDING FUNCTIONS
This section describes more advanced recording operations
that are also provided by this camera.
NOTE
• You can blur the background even more by using the
zoom slider adjust to maximum telephoto.
Shooting Portraits
The Portrait Mode blurs the background slightly, which
makes the foreground subject stand out better.
1. Enter the REC mode.
2. Press MENU.
3. Select “PORTRAIT” (Portrait Mode), and then
press the shutter release button.
4. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-63
OTHER RECORDING FUNCTIONS
NOTES
Shooting Landscapes
• You can add more depth from the foreground to back-
ground, and also create a greater feeling of horizontal
expanse by using the zoom slider to adjust to maxi-
mum wide-angle.
The Landscape Mode brings everything from distant scenery
to close foreground objects into focus.
• Using the Landscape Mode indoors, in a shaded loca-
tion, or in any other areas where lighting is dim can
result in distant objects being out of focus.
1. Enter the REC mode.
2. Press MENU.
3. Select “LANDSCAPE” (Landscape Mode), and
then press the shutter release button.
4. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-64
OTHER RECORDING FUNCTIONS
NOTE
Shooting Night Scenes
• You can use the Night Scene Mode in combination
with flash for slow sync shooting of people against a
twilight or night scene background.
The Night Scene Mode uses longer exposure to produce
beautiful night scene images.
IMPORTANT!
• The shutter speed is quite slow in the Night Scene
Mode, so be sure to use a tripod to hold the camera
steady.
• Auto Focus is difficult in the dark. If you experience
problems, use manual focusing (page E-57). There
may be some blurring of the image in cases where the
subject is moving quickly.
• Slow shutter speed also causes slow monitor screen
refresh. Because of this, the image recorded may be
slightly different from the image that was on the moni-
tor screen when you pressed the shutter release but-
ton.
1. Enter the REC mode.
2. Press MENU.
3. Select “NIGHT SCENE” (Night Scene Mode),
and then press the shutter release button.
• The contrast of Night Scene Mode images is not af-
fected by changes made in contrast settings (page E-
88).
4. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-65
OTHER RECORDING FUNCTIONS
■ Composition Outline
Instant Setup Using the Scene Mode
Auto Focus Composition
Frame Outline
With certain Scene Mode im-
ages, a composition outline
appears on the monitor screen
to aid you when composing
your image. The Auto Focus
Frame is also adjusted on the
monitor screen, so it is in the
appropriate location to suit the
composition outline.
The Scene Mode comes with a library of 28 different images.
Simply select the image whose effects are the one you want,
and the settings of the camera automatically change to the
same setup that was used to record the selected image.
■ Instant Setup Using the Scene Mode
Example: Face and Chest
• This camera does not support Camera Orientation Detec-
tion, which stores camera orientation information along
with image data so images are oriented automatically
when displayed using Photo Loader. Images recorded with
the camera oriented sideways are displayed sideways by
Photo Loader. Use commercially available image editing
software to change the orientation of images on your com-
puter screen.
Dancing Lights
Sunset
See the “Scene List” on page E-138 for a full list of available
scenes.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-66
OTHER RECORDING FUNCTIONS
NOTES
1. Enter the REC mode.
2. Press MENU.
• Scene Mode images are not images recorded using
this camera. They are intended for reference pur-
poses only.
• The actual conditions that are present when you
record your image may make it impossible to correctly
obtain all of the effects of the Scene Mode image you
select.
3. Select “SCENE” (Scene Mode), and then press
the shutter release button.
• After selecting an image in the Scene Mode, you can
adjust camera settings manually as you normally do.
• The first scene that appears is the one that was se-
lected when you last exited the Scene Mode. Note,
however, that scene number 01 appears first following
a camera reset (page E-89).
4. Select the scene you want, and then press the
shutter release button.
• You can register your own scenes and settings for
scene numbers 29 to 31. See “Registering Your Own
Scene Setups”.
5. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-67
OTHER RECORDING FUNCTIONS
1. Enter the REC mode.
2. Press MENU.
Registering Your Own Scene Setups
You can register the settings of any image recorded with a
CASIO QV-2300UX camera as a “user setup” for the Scene
Mode (page E-66). After you register a user setup, you can
recall it just as you do with other scenes in the Scene Mode.
3. Select “SCENE” (Scene Mode), and then press
the shutter release button.
■ User Setup Parameters
Focus mode, aperture (A and M only), shutter speed (S
and M only), exposure compensation, sensitivity, filter set-
ting, exposure mode, metering mode, white balance, en-
hancement, flash intensity, sharpness, saturation, con-
trast, flash mode
■ Supported Camera Models
• QV-2300UX user setups can be registered using images
recorded with a QV-2300UX only.
• QV-2800UX user setups can be registered using images
recorded with a QV-2800UX only.
4. Select the scene number where you want to
store the setup and then press
.
• Scene numbers 29 to 31 can be used to store user
setups.
■ Number of User Setups
You can register up to three user setups.
5. Select the scene you want to import, and then
press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-68
OTHER RECORDING FUNCTIONS
6. The camera returns to the REC mode after reg-
Recording a Movie
istration is complete. Now you can use the pro-
cedure under “Instant Setup Using the Scene
Mode” on page E-66 to select a scene and
record an image.
You can record movies that are approximately 16 seconds
long. There are two movie recording modes: past and nor-
mal. The past mode lets you capture images of events that
occurred before you pressed the shutter release button
while the normal mode records what happens after you
press the shutter release button.
NOTES
• The first scene that appears is the one that was se-
lected when you last exited the Scene Mode. Note,
however, that scene number 01 appears first following
a camera reset (page E-89).
• Once you register a user setup, it cannot be deleted.
You can, however, overwrite a user setup with another
user setup.
• After you select a Scene Mode image, you can see the
camera setup by displaying the various menus you
normally use when setting up the camera manually.
■ File Format: AVI
AVI format is the Motion JPEG format standard advocated
by the Open DML Consortium.
■ Size: 320 x 240 pixels
■ Movie Memory Requirements
Approximately 300KB/second
■ Maximum Movie Length
16 seconds
Download from Www.Somanuals.com. All Manuals Search And Download.
E-69
OTHER RECORDING FUNCTIONS
3. Select “MOVIE (PAST)” (Movie Past Mode),
To record a movie using the normal mode
and then press the shutter release button.
1. Enter the REC mode.
2. Press MENU.
4. When you are ready to record, press the shut-
ter release button all the way down.
• Auto Focus continues to adjust the focus as the sub-
ject moves.
3. Select “MOVIE” (Movie Mode), and then press
the shutter release button.
5. Follow the subject with the camera, and press
the shutter release button all the way down
when you want to record.
4. Point the camera at the subject, and then press
the shutter release button about half way
down.
• Pressing the shutter release button the second time
records everything that went on in front of the lens
during the 16-second period before you pressed the
shutter release button the first time in step 4.
• Auto Focus continues to adjust the focus as the sub-
ject moves.
5. Press the shutter release button all the way
down to start recording.
• Pressing the shutter button before 16 seconds have
passed after you pressed the shutter release button
the first time in step 4 records everything that went on
in front of the lens during the period from when you
pressed the shutter release button the first time, up to
the point when you pressed it the second time.
• Recording continues for 16 seconds.
• To record a movie that is shorter than 16 seconds,
press the shutter release button again when you want
to stop recording.
IMPORTANT!
To record a movie using the past mode
• Flash is disabled during movie recording.
• To view an AVI file on your computer, install
QuickTime from the CD-ROM disc that comes
bundled with the camera.
1. Enter the REC mode.
2. Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-70
OTHER RECORDING FUNCTIONS
4. Press the shutter release button to record the
Shooting Panoramas
first image.
The Panorama Mode lets you digitally stitch together mul-
tiple images to create a sweeping panorama.
• The right edge of the first image remains on the left
side of the monitor screen to help you compose the
second image of the panorama.
Right edge
of previous
image
1. Enter the REC mode.
2. Press MENU.
3. Select “PANORAMA” (Panorama Mode), and
then press the shutter release button.
5. Shoot the other images that will make up the
panorama, each time using the right edge of
the previous image to compose the next image
correctly.
6. After recording the images you want, press
MENU.
• You can group up to 10 images into a panorama.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-71
OTHER RECORDING FUNCTIONS
NOTE
• The camera uses the same exposure and white bal-
Shooting at Fixed Intervals
The Interval Mode lets you specify the number of images you
want to shoot, the interval between shots, and the time to
start shooting. It provides you with the following three types
of interval shooting.
ance settings in effect when the first image of the pan-
orama is recorded for recording all of the other images
of the panorama.
• Interval Shooting: Multiple shots at fixed intervals starting
from now
• Timer Shooting: Single shot at a specific time
• Interval + Timer Shooting: Multiple shots at fixed intervals
starting at a specific time
1. Enter the REC mode.
2. Press MENU.
3. Select “INTERVAL” (Interval Mode), and then
press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-72
OTHER RECORDING FUNCTIONS
4. Specify a value for “Shots” and then press the
8. Make exposure mode, metering mode, white
balance, and other image settings you want.
shutter release button.
• You can skip this step if you want to shoot only a
single image.
9. Compose the image so the subject is in the fo-
cus frame, and press the shutter release but-
ton all the way down.
• Select “MAX shots” when you want the camera to
keep recording images until its memory card becomes
full.
• When the time you set in steps 6 and 7 is reached, the
operation lamp lights and shooting begins.
5. Specify the “Interval” in minutes, and then
press the shutter release button.
• If you selected “Now” in step 6, shooting starts as
soon as you press the shutter release button in step 9.
• You can specify an interval value within the range of 1
minute to 60 minutes, in one-minute steps.
IMPORTANT!
• The “BULB” shutter speed setting is automatically dis-
abled in the Interval Mode. If “BULB” is selected, en-
tering the Interval Mode automatically switches over
to a shutter speed setting of 1 second.
• When the shutter speed is set to 20 seconds or longer,
the camera may not be able to record at 1-minute in-
tervals in the Interval Mode.
6. Specify the “Hour” part of the “Start Time” set-
ting, and then press the shutter release button.
• The “Start Time” specifies the time when shooting be-
gins.
• You can specify a time that is within 24 hours of your
current time (as kept by the camera’s built-in clock).
• If you want the image shooting to begin immediately
when you press the shutter release button, select
“Now” and continue from step 8.
7. Specify the “Minutes” part of the “Start Time”
setting, and then press the shutter release but-
ton.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-73
OTHER RECORDING FUNCTIONS
Canceling an Interval Mode Timer Opera-
Specifying the Exposure Mode
tion
You can select from among the four exposure modes listed
below. You can change the shutter mode setting while in any
of the record modes.
Sliding the POWER ON/OFF switch to the right to turn on the
camera while an Interval Mode timer operation is being per-
formed cancels the operation, which is indicated by the mes-
sage “Interval operation cancelled” on the monitor screen.
P Mode : Program AE
A Mode : Aperture priority AE
S Mode : Shutter speed priority AE
M Mode: Manual
Program AE
In the P Mode (program AE), shutter speed and aperture
settings are made automatically in accordance with the
brightness of the subject.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Exposure Mode”, and
then press the shutter release button.
4. Select “P” (Program), and then press the shut-
ter release button.
5. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-74
OTHER RECORDING FUNCTIONS
1. Enter the REC mode.
2. Press MENU.
Aperture Priority AE
The A Mode (aperture priority AE) is the opposite of the S
Mode. It lets you specify an aperture setting and automati-
cally adjusts shutter speed accordingly. A larger aperture
decreases depth of field, which is the zone of sharp focus in
a scene. Conversely, a smaller aperture increases depth of
field.
3. Select “FUNCTION”
“Exposure Mode”, and
then press the shutter release button.
4. Select “A” (Aperture priority), and then press
the shutter release button.
Large Aperture
Small Aperture
5. While holding down SHIFT INFO, use [+] and [–]
to select the aperture value you want.
• Note that a smaller number indicates a larger aperture, and
a larger number indicates a smaller aperture.
Aperture
■ Aperture Settings
Aperture
QV-2300UX
QV-2800UX
Larger
F2.8
F3.2
Smaller
F5.6
F8
•
•
F4.8
•
Download from Www.Somanuals.com. All Manuals Search And Download.
E-75
OTHER RECORDING FUNCTIONS
To do this
Decrease aperture
Increase aperture
Press this button
Shutter Speed Priority AE
The S Mode (shutter speed priority AE) lets you specify a
shutter speed and automatically adjusts aperture accord-
ingly.
[+]
[–]
6. Press the shutter release button to record the
image.
Fast (1/1000)
Slow (1/30)
IMPORTANT!
• It is often difficult to obtain proper brightness when
shooting a subject that is very dark or very light. In
such a case, try different aperture settings to find the
one that produces the best results.
■ Shutter Speed Settings
Slow
Fast
Shutter
Speed
BULB, 60 seconds to 1/2000 second
1. Enter the REC mode.
2. Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-76
OTHER RECORDING FUNCTIONS
IMPORTANT!
“Exposure Mode”, and
3. Select “FUNCTION”
then press the shutter release button.
• It is often difficult to obtain proper brightness when
shooting a subject that is very dark or very light. In
such a case, try different shutter speed settings to find
the one that produces the best results.
4. Select “S” (Shutter speed priority), and then
press the shutter release button.
• When the Shutter Speed is set to “BULB”, exposure
continues as long as you depress the shutter button.
Because of this, use of the wired remote control unit is
recommended whenever using the “BULB” setting.
• The self-timer is disabled while the Shutter Speed is
set to “BULB”.
5. While holding down SHIFT INFO, use [+] and [–]
to specify the shutter speed.
• The slowest shutter speed when “BULB” is selected is
60 seconds.
• Note that using a slower shutter speed increases the
chance of static being present in your image, and the
amount of static visible in an image is inversely pro-
portional to the shutter speed.
• At shutter speeds of one second or slower, the cam-
era automatically performs internal data processing
intended to limit image static, so the image record op-
eration takes longer at slow shutter speeds. At shutter
speeds of one second or greater, doubling the shutter
speed setting tells you about how long it takes for an
image to be recorded. For example, image recording
with a shutter speed of one second takes about two
seconds.
Shutter
Speed
To do this
Press this button
Increase shutter speed
Decrease shutter speed
[+]
[–]
6. Press the shutter release button to record the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-77
OTHER RECORDING FUNCTIONS
• A shutter speed slower than 1/8 second can cause the
4. Select “M” (Manual), and then press the shut-
ter release button.
brightness of the image on the monitor screen to be
different from the brightness of the image that is re-
corded. Slower speeds can also cause exposure of
the image to be outside the AE range, making it im-
possible to achieve a proper aperture setting.
5. Use [+] and [–] to specify the shutter speed.
Manual Exposure
The M Mode (manual) lets you make the shutter speed and
aperture settings you want.
• The shutter speed settings you can make are the same as
those for shutter speed priority AE (page E-76).
• The aperture settings you can make are the same as those
for aperture priority AE (page E-75).
Shutter
Speed
To do this
Press this button
Increase shutter speed
Decrease shutter speed
[+]
[–]
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Exposure Mode”, and
then press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-78
OTHER RECORDING FUNCTIONS
6. While holding down SHIFT INFO, use [+] and [–]
to select the aperture value you want.
Quick Exposure Mode Selection
You can also use the following procedure to change the ex-
posure mode, without going through the menu.
1. Enter the REC mode.
2. While holding down SHIFT INFO, press
to
cycle through the exposure mode icons on the
monitor screen in the sequence shown below.
Aperture
•
(program AE)
(shutter speed priority AE)
(aperture priority AE)
(manual)
To do this
Press this button
Decrease aperture
Increase aperture
[+]
[–]
7. Press the shutter release button to record the
image.
IMPORTANT!
• A shutter speed slower than 1/8 second can cause the
brightness of the image on the monitor screen to be
different from the brightness of the image that is re-
corded.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-79
OTHER RECORDING FUNCTIONS
Multi:
Selecting the Metering Mode
This mode takes readings across the
entire image, and provides balanced
exposure settings.
Use the following procedure to specify multi metering, spot
metering, or center-weighted metering as the metering
mode.
Center:
This mode takes readings at the center
of the image.
1. Enter the REC mode.
2. Press MENU.
Spot:
3. Select “FUNCTION”
“Metering”, and then
press the shutter release button.
This mode takes readings at a very lim-
ited spot at the center of the screen. It is
not affected by light around the outer
periphery of the image, which means
that exposure can be set according to
the illumination of a particular subject.
4. Select the metering mode you want and then
press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-80
OTHER RECORDING FUNCTIONS
Quick Metering Mode Selection
Setting the Sensitivity Level
You can also use the following procedure to change the me-
tering mode, without going through the menu.
Use the following procedure to specify the sensitivity level.
1. Enter the REC mode.
2. Press MENU.
1. Enter the REC mode.
2. While holding down SHIFT INFO, press
to cycle through the metering mode
icons on the monitor screen in the sequence
shown below.
3. Select “FUNCTION”
“Sensitivity”, and then
press the shutter release button.
4. Select the setting you want, and then press the
shutter release button.
•
(multi)
(center)
(spot)
If you want to set sensitivity at this level
ISO 80 equivalent
Select this
ISO 80
ISO 160 equivalent
ISO 160
ISO 320
ISO 320 equivalent
Download from Www.Somanuals.com. All Manuals Search And Download.
E-81
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Higher sensitivity can increase the chance of noise in
Using the Filter Function
The camera’s filter function lets you filter the image with one
of a selection of different colors.
the image.
• Higher sensitivity can make it difficult to obtain proper
focus using Auto Focus. It does not change the mini-
mum brightness required for Auto Focus.
• Regardless of the setting you make here, a sensitivity
setting of ISO 80 is used automatically whenever you
shoot with flash and whenever the S Mode (shutter
speed priority AE) is selected.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Filter”, and then press
the shutter release button.
4. Select the setting you want, and then press the
shutter release button.
• Available filter settings are: Off, B/W, Sepia, Red,
Green, Blue, Yellow, Pink, Purple
NOTES
• The filter function produces the same effect as if a
piece of colored cellophane paper were held in front of
the lens of the camera. Color enhancement (page E-
85), on the other hand, alters the characteristics of the
image to enhance specific color components.
• If color enhancement (page E-85) and the filter func-
tion are both turned on at the same time, the filter
function is given priority (color enhancement is not
performed).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-82
OTHER RECORDING FUNCTIONS
NOTE
Selecting White Balance
• Use “Daylight” for shooting in the Night Scene Mode.
You can also use manual white balance if the “Day-
light” setting does not produce the desired results.
Selecting the right type of white balance can help to make
the colors of a subject appear most natural under the type of
lighting that is available.
Adjusting White Balance Manually
1. Enter the REC mode.
2. Press MENU.
Under some light sources, automatic white balance under
the “Auto” setting can take a long time to complete. Also, the
auto white balance range (color temperature range) is lim-
ited. Manual white balance helps to ensure that colors are
recorded correctly for a particular light source.
Note that manual white balance requires you to point the
camera at a piece of white paper or other similar object so it
completely fills the monitor screen.
3. Select “FUNCTION”
“White Balance”, and
then press the shutter release button.
4. Select the type of white balance you want, and
then press the shutter release button.
To do this
Let the camera adjust white balance
automatically
Select this
Auto
1. Enter the REC mode.
2. Press MENU.
Shoot outdoors
Daylight
Shade
3. Select “FUNCTION”
“White Balance”, and
Shoot in shady conditions
Shoot under incandescent (light
bulb) lighting
then press the shutter release button.
Tungsten
Fluorescent
Manual
4. Select “Manual”, and then press the shutter re-
lease button.
Shoot under fluorescent lighting
Adjust white balance normally for a
particular light source
Download from Www.Somanuals.com. All Manuals Search And Download.
E-83
OTHER RECORDING FUNCTIONS
5. Point the camera at a piece of white paper or
Quick White Balance Selection
You can also use the following procedure to change the
white balance, without going through the menu.
other similar object so it completely fills the
monitor screen, and then press the shutter re-
lease button.
• This performs white balance adjustment and returns
to the REC mode screen.
1. Enter the REC mode.
• Pressing
without pressing the shutter release
2. While holding down SHIFT INFO, press
to
button first restores the setting obtained the last time
you performed manual white balance.
cycle through the white balance icons on the
monitor screen in the sequence noted below.
• Dark lighting or pointing the camera at a dark object
can cause manual white balance to take a very long
time to complete. Avoid such conditions when per-
forming manual white balance adjustment.
•
(Auto)
(Tungsten)
(Daylight)
(Fluorescent)
(Shade)
(Manual)
icon,
• For manual white balance, display the
point the camera at a white piece of paper, hold down
SHIFT INFO, and press the shutter release button.
NOTE
• Even if you turn off the camera or change its white
balance back to “Auto” or another white balance set-
ting, the last value obtained by manual white balance
is retained in memory and restored the next time you
select “Manual” for the white balance. The last value
obtained by manual white balance is retained, regard-
less of the mode memory setting (page E-88).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-84
OTHER RECORDING FUNCTIONS
NOTES
Enhancing Certain Colors
• The filter function (page E-82) produces the same ef-
fect as if a piece of colored cellophane paper were
held in front of the lens of the camera. Color enhance-
ment, on the other hand, alters the characteristics of
the image to enhance specific color components.
• If color enhancement and the filter function (page E-
82) are both turned on at the same time, the filter func-
tion is given priority (color enhancement is not per-
formed).
Use the following procedure when you want to enhance a
particular color in your recorded image.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Enhancement”, and
then press the shutter release button.
4. Select the setting you want, and then press the
shutter release button.
To do this
Turn off color enhancement
Enhance reds
Select this
Off
Red
Enhance greens
Green
Enhance blues
Blue
Enhance flesh tones
Flesh Tones
Download from Www.Somanuals.com. All Manuals Search And Download.
E-85
OTHER RECORDING FUNCTIONS
4. Select the setting you want, and then press the
Turning the On-screen Grid On and Off
shutter release button.
You can display gridlines on the monitor screen to help you
compose your images before recording them.
To do this
Turn the grid off
Select this
Off
Turn the grid on
On
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Grid”, and then press
the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-86
OTHER RECORDING FUNCTIONS
Specifying Outline Sharpness
Specifying Color Saturation
Use the following procedure to control the sharpness of im-
age outlines.
Use the following procedure to control the saturation of im-
age colors.
1. Enter the REC mode.
2. Press MENU.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Sharpness”, and then
press the shutter release button.
3. Select “FUNCTION”
“Saturation”, and then
press the shutter release button.
4. Select the setting you want, and then press the
shutter release button.
4. Select the setting you want, and then press the
shutter release button.
To do this
Make outlines sharp
Leave outlines as they are
Make outlines soft
Select this
Hard
To do this
Select this
High
Make colors more intense
Leave colors as they are
Make colors less intense
Normal
Soft
Normal
Low
Download from Www.Somanuals.com. All Manuals Search And Download.
E-87
OTHER RECORDING FUNCTIONS
Specifying Contrast
Specifying Power On Default Settings
Use the following procedure to control the difference be-
tween the light areas and dark areas of the image.
Configuring the camera’s “mode memory” controls power on
default settings. Turning a mode memory item on specifies
that the setting of the item when the camera is turned off
should be restored when the camera is turned back on
again. Turning a mode memory item off specifies that its fac-
tory default setting should be used whenever the camera is
turned on.
1. Enter the REC mode.
2. Press MENU.
3. Select “FUNCTION”
“Contrast”, and then
press the shutter release button.
1. Enter the REC mode.
2. Press MENU.
4. Select the setting you want, and then press the
shutter release button.
3. Select “FUNCTION”
“Mode Memory”, and
then press the shutter release button.
To do this
Increase contrast
Select this
High
4. Select the item whose mode memory status
you want to change, and then press the shutter
release button.
Leave contrast as it is
Decrease contrast
Normal
Low
NOTE
5. Select the setting you want, and then press the
shutter release button.
• The contrast setting you make is not used in the Night
Scene Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-88
OTHER RECORDING FUNCTIONS
To do this when the camera is turned on
Restore the item’s last setting when
power was turned off
Select this
Resetting the Camera
Use the following procedure to reset all of the camera’s set-
tings to their initial defaults as shown under “Camera Menus”
on page E-136.
On
Restore the item’s factory default setting
Off (default)
1. Enter the REC mode or PLAY mode.
2. Press MENU.
■ Mode Memory Items and Settings
Memory Mode Status
Item
On
Off
Normal
ISO 80
P (Program AE)
Multi
3. Select “Restore” using one of the following
two key operations, and then press the shutter
release button.
Recording Mode
Sensitivity
Exposure Mode
Metering
White Balance
Flash
Setting at power off.
Auto
If you are here
REC mode
Select this on the menu screen
“FUNCTION” “SET UP” “Restore”
“SET UP” “Restore”
Auto
Focus
Auto
PLAY mode
Digital Zoom
Flash Intensity
Auto
Normal
4. In response to the confirmation message that
appears, use [+] and [–] to select “Yes” to reset
or “No” to exit, and then press the shutter re-
lease button.
6. Press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-89
OTHER RECORDING FUNCTIONS
Changing REC mode FUNCTION Menu
Using the Camera’s Shortcut Features
Settings Using the Shortcut Buttons
The shortcut features of the
camera help to make it quicker
Changing REC mode FUNCTION Menu settings is normally
a multi-step process: Press MENU, use [+] and [–] to select
“FUNCTION”, press the shutter release button, use [+] and
[–] to select the item, and then use [+] and [–] to change the
setting. This shortcut lets you change the settings of specific
REC mode FUNCTION menu items without displaying the
FUNCTION menu.
SHIFT
INFO
MF
and easier to obtain the REC
mode setup you want. There
are three shortcut procedures
that you can use.
Shortcut buttons
■ Changing specific REC mode FUNCTION menu set-
tings using the shortcut buttons
To change settings using the shortcut buttons
The shortcut buttons are the three buttons to the right of
the SHIFT INFO button below the monitor screen. You can
cycle through REC mode FUNCTION menu settings by
holding down SHIFT INFO and pressing the shortcut but-
tons. See page E-91.
1. Enter the REC mode.
2. Hold down SHIFT INFO.
• This causes icons that identify the FUNCTION menu
items assigned to the shortcut buttons to appear on
the monitor screen above each button.
■ Direct access to the FUNCTION menu
This shortcut lets you display the FUNCTION menu with
the press of a button. See page E-93.
■ Cycling through settings on the FUNCTION menu
This shortcut lets you cycle through the settings of the cur-
rently selected FUNCTION menu item, without advancing
to the item’s setting screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-90
OTHER RECORDING FUNCTIONS
3. While holding down SHIFT INFO, press one of
To assign REC mode FUNCTION menu
items to shortcut buttons
the shortcut buttons to cycle through the set-
tings of the item assigned to the button. The
current setting of each button is indicated by
an icon above the button.
1. Enter the REC mode.
2. Press MENU.
REC mode
Button
FUNCTION
Menu Item
Icon
Setting
3. Use [+] and [–] to select “FUNCTION”, and then
press the shutter release button.
Program AE
4. Use [+] and [–] to select the item you want to
assign to a shortcut button and then press the
shutter release button to display its setting
screen.
Aperture Priority AE
Exposure
Mode
(page E-79)
Shutter Speed
Priority AE
Manual
Multi
Metering
(page E-81)
Center
Spot
Auto
Daylight
Shade
Tungsten
Fluorescent
Manual
White
Balance
(page E-84)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-91
OTHER RECORDING FUNCTIONS
• The following example shows the Filter setting screen.
• Assigning a menu item to a shortcut button changes
the icon that appears above the button when SHIFT
INFO is pressed in the REC mode as shown below.
Default Setting
Icon
Icon After
Assignment
Button
SET 1
SET 2
• You can assign any of the items marked with “ć” in
the table under “Camera Menus” on page E-136 to a
shortcut button.
SET 3
• Repeat the above procedure when you want to restore
the default shortcut button assignments. You need to
assign the following items to the shortcut buttons indi-
cated to restore the default assignments.
5. While holding down SHIFT INFO, press the
shortcut button to which you want to assign
the item you selected in step 4.
• This assigns the item and returns to the REC mode
screen.
Button
Assigned Item (Default)
Exposure Mode
Metering
• You can assign only one menu item to each of the
three shortcut buttons.
White Balance
• Default shortcut button assignments are also restored
automatically by a Camera Reset (page E-89).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-92
OTHER RECORDING FUNCTIONS
3. While holding down SHIFT INFO use [+] (for-
Directly Accessing the REC mode FUNC-
TION Menu
When in the REC mode, you can hold down SHIFT INFO
and press MENU to display the FUNCTION menu.
ward) and [–] (back) to cycle through the set-
tings of the currently selected item.
Cycling through REC mode FUNCTION Menu
Settings
You can use this shortcut to cycle through the settings of
REC mode FUNCTION menu items without displaying the
setting screen for the item.
1. Enter the REC mode.
4. Repeat steps 2 and 3 for other items.
2. Display the FUNCTION menu and select the
item whose setting you want to change.
5. When everything is the way you want, press
to exit the FUNCTION menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-93
PLAYBACK
You can use the camera’s built in monitor screen to play
back recorded images.
NOTES
• Holding down [+] or [–] scrolls images at high speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower quality
than the actual display image. The actual display im-
age appears about three seconds after the preview
image. This does not apply to images copied from an-
other digital camera.
Basic Playback Operation
Use the following procedure to scroll through recorded im-
ages stored in the camera’s memory.
1. Slide the REC/PLAY selector to “PLAY”.
PLAY: PLAY mode for playing back images
2. Use [+] and [–] to scroll through the images on
the monitor screen.
To do this
Scroll forward
Scroll backward
Press this button
[+]
[–]
[+]
[+]
[–]
[–]
Download from Www.Somanuals.com. All Manuals Search And Download.
E-94
PLAYBACK
3. Press the shutter release button to start play-
Playing a Movie
ing the movie.
Use the following procedure to play back a movie recorded
in the Movie Mode.
• The following describes operations that are available
during movie playback.
1. Enter the PLAY mode.
If you want to do this
Press this button
SHIFT INFO
Toggle the movie between full
screen and quarter screen view
2. Use [+] and [–] to scroll through the images on
the monitor screen until the movie you want to
play is displayed.
Playback forward
Playback in reverse
Pause playback
[+]
[–]
Shutter release button
Movie
Mode icon
Skip to the next frame while playback
is paused
[+]
Skip to the previous frame while
playback is paused
[–]
Exit movie playback
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
E-95
PLAYBACK
3. Press the shutter release button to start play-
Playing a Panorama
ing the panorama.
Use the following procedure to play back a panorama re-
corded in the Panorama Mode.
• The following describes operations that are available
during panorama playback.
1. Enter the PLAY mode.
If you want to do this
Press this button
SHIFT INFO
Toggle the panorama between full
screen and compressed view
2. Use [+] and [–] to scroll through the images on
the monitor screen until the panorama you
want to play is displayed.
Scroll forward
Scroll back
[+]
[–]
Pause playback
Shutter release button
Panorama
Mode icon
Skip to the next image while play-
back is paused
[+]
Skip to the previous image while
playback is paused
[–]
Exit panorama playback
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
E-96
PLAYBACK
Enlarging the Playback Image
2X
Use the following procedure to enlarge the playback image
on the screen. You can select either 2X or 4X enlargement.
1. Enter the PLAY mode.
2. Use [+] and [–] to display the image you want to
enlarge.
3. Press MENU.
4X
4. Select “ZOOM”, and then press the shutter re-
lease button to enlarge the image.
• The following describes operations that are available
while an enlarged image is on the playback screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-97
PLAYBACK
If you want to do this
Do this
Displaying the 9-image View
Display on-screen guidance
messages
Press SHIFT INFO.
The following procedure displays nine images on the monitor
screen at the same time.
Shift the view right
Press [+].
Press [–].
Press
Shift the view left
1. Enter the PLAY mode.
Shift the view upwards
Shift the view downwards
Cycle the enlargement in the
.
Press
.
2. Press
.
Operate the zoom
slider.
• The first of the nine images that appear on the monitor
screen is the one that was displayed when you
sequence: 1X
normal size
2X
4X
pressed
.
Press the shutter
release button.
Return the image to normal size
[+]
[–]
[+]
[–]
1
2
5
8
3
6
9
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
25
4
7
IMPORTANT!
• You cannot enlarge movie or panorama images.
• You can use the zoom slider at any time to cycle
through the enlargement settings in the PLAY mode
without selecting “ZOOM” on the menu.
• The following describes operations that are available
while the 9-image view is on the monitor screen.
To do this
Scroll forward
Press this button
[+]
[–]
Scroll backward
Display the selection pointer (See
following section.)
SHIFT INFO
Any button other than
the above three.
Exit the 9-image view
Download from Www.Somanuals.com. All Manuals Search And Download.
E-98
PLAYBACK
3. Use [+] and [–] to move the pointer to the image
Selecting a Specific Image in the 9-image
View
you want to select, and then press the shutter
release button.
• This displays the single-image view of the selected
image.
1. Display the 9-image view.
2. Press SHIFT INFO.
• This causes a pointer to appear in the upper left cor-
ner of the monitor screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-99
PLAYBACK
IMPORTANT!
• Auto Power Off (page E-36) is disabled whenever
Using the Slide Show Feature
Slide Show automatically plays back images in sequence at
a fixed interval.
Slide Show is being used. This means you should not
leave Slide Show running when using batteries to
power the camera. Doing so can rundown batteries.
Be sure to stop Slide Show and turn off the camera
after you are finished.
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button op-
eration, or hold down the button until the image stops.
• Images copied from another digital camera or a com-
puter may take longer time to appear than the Slide
Show interval time you select.
1. Enter the PLAY mode.
2. Press MENU.
3. Select “SLIDE SHOW”, and then press the
shutter release button.
• This starts the slide show.
• Pressing MENU at this point displays a screen for set-
ting the interval between image changes within the
range of three to 30 seconds.
4. To stop Slide Show, press any button besides
the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-100
DELETING IMAGES
Your camera lets you use any one of the following four meth-
Deleting the Displayed Image
ods to delete images from its memory. You can delete the
currently displayed image, one or more selected images, all
the images in one or more selected folders, or all the images
in the camera’s memory.
Use the following procedure when you want to delete the
image that is currently on the monitor screen.
1. Enter the PLAY mode.
IMPORTANT!
2. Use [+] and [–] to scroll through images and
display the image you want to delete.
• Image deletion cannot be undone. Before deleting an
image, make sure you no longer need it or you have a
back-up copy saved on you computer, on diskette, or
on some other medium. Be especially careful with
“Deleting All Unprotected Images” operation, which
deletes all unprotected images in memory.
• A protected image cannot be deleted. See “Protecting
Images Against Deletion” on page E-107 for details on
protecting and unprotecting images.
3. Press
.
4. In response to the confirmation message that
appears, use [+] and [–] to select “Yes”.
• If you change your mind and do not want to delete the
image, select “No” instead.
• Delete operations are disabled when all of the images
on the camera’s memory card are protected.
5. Press the shutter release button.
• Displaying a panorama or movie image in step 2 of the
above procedure causes all of the images that make
up the panorama or movie to be deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-101
DELETING IMAGES
NOTE
• The camera does not maintain open spaces in its
Deleting Selected Images
The following procedure lets you select one or more image
for deletion.
memory. Deleting an image causes images following
the deleted image to be shifted up to fill in the empty
space created by the deletion.
1. Enter the PLAY mode.
2. Press MENU.
100-1
100-2
100-3
100-4
3. Select “DELETE”
“Select”, and then press
the shutter release button.
100-1
100-2
100-3
4. Use [+] and [–] to display the image you want to
delete.
5. Press the shutter release button to toggle the
displayed image’s
icon on and off.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-102
DELETING IMAGES
icon is marked for de-
• Any image marked with the
Deleting All Images in Selected Folders
letion. It will be deleted when you perform the next
step of this procedure.
Use the following procedure to select one or more folder for
deletion of all their images.
• Note that the image that was on the monitor screen
when you pressed MENU in step 2 appears first with
its
icon turned on.
1. Enter the PLAY mode.
2. Press MENU.
• You can repeat steps 4 and 5 to mark and unmark
multiple images if you want.
6. Press
.
3. Select “DELETE”
“Folder”, and then press
the shutter release button.
7. In response to the confirmation message that
appears, use [+] and [–] to select “Yes”.
4. Use [+] and [–] to display the folder whose im-
ages you want to delete.
• If you change your mind and want to cancel the delete,
select “No” instead.
5. Press the shutter release button to toggle the
displayed folder’s
icon on and off.
8. Press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-103
DELETING IMAGES
icon is marked for deletion. All
• Any folder with the
Deleting All Unprotected Images
its images will be deleted when you perform the next
step of this procedure.
Use the following procedure when you want to delete all of
the images currently on the camera’s memory card.
• Note that the folder whose image was on the monitor
screen when you pressed MENU in step 2 appears
first with its
icon turned on.
1. Enter the PLAY mode.
2. Press MENU.
• You can repeat steps 4 and 5 to mark and unmark
multiple folders if you want.
6. Press
.
3. Select “DELETE”
“All”, and then press the
shutter release button.
7. In response to the confirmation message that
appears, use [+] and [–] to select “Yes”.
4. In response to the confirmation message that
appears, use [+] and [–] to select “Yes”.
• If you change your mind and want to cancel the delete,
select “No” instead.
• If you change your mind and want to cancel the delete,
select “No” instead.
8. Press the shutter release button.
5. Press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-104
MANAGING IMAGES
The image management capabilities of the camera make it
Folders
easy to keep track of images. You can protect images
against deletion, and even use its DPOF feature to specify
images for printing.
A folder is created automatically whenever you shoot the
first image on a particular date. The name assigned to the
folder is based on the current date, as described below. You
can have up to 900 folders on a memory card at the same
time (subject to storage capacity restrictions).
Folders and Files
Example: Folder created on July 19, which is the 100th
folder on the memory card
Whenever you shoot an image, the camera automatically
creates a folder for the current date (as kept by the camera’s
built in clock). Any images you shoot on a particular day are
all stored as image files inside the same folder.
Month
Day
• For full details about the organization of folders on the
memory card, see “Using a Memory Card to Transfer Im-
age Data” on page E-125.
100_0719
Underbar
Serial number
• The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-105
MANAGING IMAGES
• In addition to image files, memory cards also contain a
Files
number of other files used by the system for image data
management.
• The actual number of files you will be able to store on a
memory card depends on the capacity of the card, image
quality settings, etc.
Each folder can contain up to 250 image files. If you try to
save the 251st image to a folder, the camera automatically
creates a new folder and stores the image there. The names
assigned to files are based on the current date, as shown
below.
• Panorama images are stored as groups of multiple indi-
vidual images.
Example: 26th image shot on November 7
• If there are more than 250 image files in a folder (due to
copying from another digital camera or other source), only
the first 250 (in name sequence) can be played back.
Month
Day
11070026.JPG
Extension (.JPG/.AVI)
Serial number
Download from Www.Somanuals.com. All Manuals Search And Download.
E-106
MANAGING IMAGES
Selecting a Folder for Playback
Protecting Images Against Deletion
Use the following procedure to select a particular folder and
play back the image files it contains.
Image protection guards against accidental deletion of im-
ages stored on the camera’s memory card. A protected im-
age cannot be deleted until it is unprotected (page E-101).
You can protect and unprotect a single specific image, all the
images in a particular folder, or all images currently on the
memory card.
1. Enter the PLAY mode.
2. Press
.
3. Use [+] and [–] to select the folder you want,
and then press the shutter release button.
Protecting Selected Images
• This displays the image of the first file (in name se-
quence) contained in the folder you selected.
1. Enter the PLAY mode.
2. Press MENU.
3. Select “PROTECT”
“Select” and then press
the shutter release button.
4. Use [+] and [–] to display the image you want to
protect.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-107
MANAGING IMAGES
5. Press the shutter release button to toggle the
displayed image’s icon on and off.
Protecting and Unprotecting All Images
in Selected Folders
1. Enter the PLAY mode.
2. Press MENU.
3. Select “PROTECT” “Folder”, and then press
the shutter release button.
4. Use [+] and [–] to display the folder whose im-
ages you want to protect.
• Any image marked with the
icon is marked for pro-
tection. It will be protected when you perform the next
5. Press the shutter release button to toggle the
step of this procedure. Any image without the
will be unprotected.
icon
icon
displayed folder’s
icon on and off.
• You can repeat steps 4 and 5 to turn on the
for multiple images if you want.
6. Press
to protect all the images marked for
protection, and unprotect the unmarked im-
ages.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-108
MANAGING IMAGES
• Any folder with the
All its images will be protected when you perform the
next step of this procedure. All images in any folder
icon is marked for protection.
Protecting and Unprotecting All Images
1. Enter the PLAY mode.
2. Press MENU.
without the
icon will be unprotected.
• You can repeat steps 4 and 5 to turn on the
for multiple folders if you want.
icon
3. Select “PROTECT” “All”, and then press the
shutter release button.
6. Press
to protect the images in all the fold-
ers marked for protection, and unprotect the
images in the unmarked folders.
4. Select the memory protection setting you
want, and then press the shutter release but-
ton to apply it.
To do this
Select this
On
Protect all images on the memory card
Unprotect all images on the memory card
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
E-109
MANAGING IMAGES
Making DPOF Settings for Particular Im-
DPOF
ages
The letters “DPOF” stand for “Digital Print Or-
der Format”, which is a format for recording on
a memory card or other medium which digital
camera images should be printed and how
many copies of the image should be printed.
Then you can print on a DPOF-compatible
printer or at a professional print service from
the memory card in accordance with the file
name and number of copies settings recorded
on the card.
1. Enter the PLAY mode.
2. Press MENU.
3. Select “DPOF”
“Select”, and then press the
shutter release button.
4. Use [+] and [–] to display the image you want to
print.
■ DPOF Settings
File Name, number of copies, date
5. Use the button operations described below to
make the DPOF settings you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-110
MANAGING IMAGES
To do this
Press this button
SHIFT INFO
Making DPOF Settings for Particular
Folders
Decrease the number of copies value
Increase the number of copies value
Toggle printing of the recording date
on and off
1. Enter the PLAY mode.
2. Press MENU.
• An image selected for printing is marked by the
icon.
3. Select “DPOF”
“Folder” and then press the
shutter release button.
• An image for which printing of the recording date is
turned on is marked with the
icon.
4. Use [+] and [–] to display the folder whose im-
ages you want to print.
• You can repeat steps 4 and 5 to make DPOF settings
for multiple image files, if you want.
5. Use the same procedures as those described
in step 5 under “Making DPOF Settings for Par-
ticular Images” on page E-110 to make the
DPOF settings you want.
6. After you are finished making the settings you
want, press
to complete the procedure.
6. After you are finished making the settings you
want, press
to complete the procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-111
MANAGING IMAGES
Making DPOF Settings of All Images on
the Memory Card
1. Enter the PLAY mode.
2. Press MENU.
3. Select “DPOF”
“All”, and then press the
shutter release button.
5. After you are finished making the settings you
want, press to complete the procedure.
4. Use the button operations described below to
make the DPOF settings you want.
To do this
Press this button
SHIFT INFO
Decrease the number of copies value
Increase the number of copies value
Toggle printing of recording dates on
and off
Download from Www.Somanuals.com. All Manuals Search And Download.
E-112
OTHER SETTINGS
3. Select the setting you want, and then press the
Turning the Monitor Screen
Indicators On and Off
shutter release button.
You can use the procedure below to turn the following moni-
tor screen indicators on and off: exposure mode, memory
capacity, image size, image protection indicator, folder
name, file number, battery capacity.
To do this
Turn on display indicators
Turn off display indicators
Select this setting
On
Off
1. Enter the REC mode or PLAY mode.
2. Select “Indicators” using one of the following
two key operations, and then press the shutter
release button.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Indicators”
PLAY mode
“Indicators”
Download from Www.Somanuals.com. All Manuals Search And Download.
E-113
OTHER SETTINGS
4. Select the setting you want, and then press the
Changing the Display Language
shutter release button.
Use the following procedure to switch the display language
between English and Japanese.
To do this
Select this setting
English
Display on-screen text in English
Display on-screen text in Japanese
Japanese
1. Enter the REC mode or PLAY mode.
2. Press MENU.
3. Select “Language” using one of the following
two key operations, and then press the shutter
release button.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Language”
PLAY mode
“Language”
Download from Www.Somanuals.com. All Manuals Search And Download.
E-114
OTHER SETTINGS
4. Select the setting you want, and then press the
Turning the Confirmation Beep On and Off
shutter release button.
Use the following procedure to turn the beep that sounds
each time you press a button on and off.
To do this
Select this setting
Turn on the confirmation beep
Turn off the confirmation beep
On
Off
1. Enter the REC mode or PLAY mode.
2. Press MENU.
3. Select “Beep” using one of the following two
key operations, and then press the shutter re-
lease button.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Beep”
“Beep”
PLAY mode
Download from Www.Somanuals.com. All Manuals Search And Download.
E-115
CONNECTING TO EXTERNAL EQUIPMENT
Your camera has three terminals for connection to external equipment: a VIDEO OUT terminal, a DIGITAL terminal, and a USB
port. You can use these terminals to connect the camera to a television, VCR, computer, or other external equipment. The QV-
2800UX also includes an external flash sync terminal that can be used to connect a commercially available flash unit.
Computer
(page E-122)
USB
Wired remote controller
(page E-119)
DIGITAL
USB VIDEO OUT DIGITAL
DC IN 6V
External flash
(page E-120)
TV
VIDEO OUT
(page E-117)
QV-2800UX
External flash
sync terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
E-116
CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
• Be sure to turn off both the camera and the other
Connecting to a Television
Images being displayed on the camera’s monitor screen,
whether for recording or playback can also be displayed on
the screen of a connected television. Connect the camera to
a TV as illustrated below.
equipment before making any connections.
• Check the documentation that comes with your other
equipment for information you may need to know
when making connections.
• Leaving the same image displayed on a television or
computer display screen for very long periods can
cause the image to be “burned in” on the screen.
When this happens, a faint after-image remains on the
screen, even after you disconnect the camera. To
avoid this, you should not leave the same image dis-
played on such a screen for very long periods.
• This camera does not support cable transfer of data
with other CASIO digital cameras.
Video cable
(Bundled with camera.)
TV
USB VIDEO OUT DIGITAL
DC IN 6V
INPUT
L
R
AUDIO
VIDEO
VIDEO OUT
terminal
VIDEO IN terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
E-117
CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
1. Use the video cable to connect the camera to
the television as shown in the illustration.
• When you have PAL selected as the video signal out-
put mode, the monitor screen is turned off when you
connect the cable to the VIDEO OUT terminal.
2. Perform the required operation on the TV to set
it up for video input.
• See the documentation that comes with your televi-
sion for information about how to do this.
1. Enter the REC mode or PLAY mode.
2. Press MENU.
3. Perform normal playback and recording opera-
tions on the camera.
3. Select “VIDEO OUT” using one of the following
two key operations, and then press the shutter
release button.
IMPORTANT!
• Icons and other indicators that normally appear on the
camera’s monitor screen will also appear on the
screen of the connected TV.
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“VIDEO OUT”
PLAY mode
“VIDEO OUT”
Selecting the Video Output Signal Mode
Your camera supports both NTSC (used in U.S., Japan, and
other countries) and PAL (used in Europe and other areas)
video output signal systems. The video system you should
use depends on the country of origin of the equipment you
are connecting to the camera’s VIDEO OUT terminal.
4. Use [+] and [–] to select “NTSC” or “PAL”, and
then press the shutter release button.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-118
CONNECTING TO EXTERNAL EQUIPMENT
Connecting the Wired Remote Controller
Connecting an External Flash Unit
(QV-2800UX Only)
to the Camera
The optionally available wired remote controller lets you op-
erate the camera with touching it. This capability helps to
avoid the effects of unintended camera movement when
shooting at slow shutter speeds or with high telephoto set-
tings with the camera mounted on a tripod. You can also use
it to scroll through images during presentations on a TV
screen. For more information about using the wired remote
controller, see the instructions that come with it.
Use of a commercially available flash unit makes it possible
to obtain a higher level of brightness (guide number) than
you get when using the built-in flash alone. An external flash
also makes it possible to extend the effective range of flash
photography.
• The guide number of the internal flash is 9 (ISO 100/m).
External Flash Unit Requirements
The external flash unit you use with your camera must sat-
isfy the following requirements.
• Configuration: tripod hole mountable grip type with sync
cable; or tripod hole mountable with grip-equipped bracket
and sync cable
Wired Remote
Controller Model: WR-1C (QV-2300UX option,
QV-2800UX bundled accessory)
• Coverage Angle: Coverage of 40mm equivalent 35mm fo-
cal length lens (without wide conversion lens)
• Some flash performance may be lost when using a ring
flash or other type of unit with a long flash time.
• The aperture values and ISO sensitivity available with
some flash units may not match the values supported by
your camera. In such a case, make adjustments in the ap-
erture and ISO sensitivity settings of the external flash and
the camera until proper brightness is achieved.
• Some flash performance may be lost when using a zoom
flash.
USB VIDEO OUT DIGITAL
DC IN 6V
Wired
Remote
Controller
DIGITAL terminal
• You can perform the following operations using the wired
remote controller: shutter release, zoom slider, MENU,
, [+], [–], SHIFT INFO,
,
.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-119
CONNECTING TO EXTERNAL EQUIPMENT
Attaching an External Flash Unit
Always make sure that the external flash unit is turned off
before attaching it to detaching it from the camera. Leaving
the flash unit on can cause it to fire unexpectedly.
External
flash unit
Tripod hole
Bracket
1. Point the lens of the camera straight forward,
so it matches the optical axis of the external
flash.
External flash
sync terminal
2. Attach the external flash unit to its bracket,
and affix the bracket to the camera’s tripod
hole.
Sync cable
• If you are using a grip type flash unit, affix the flash
unit directly to the camera’s tripod hole.
Terminal cap
• Make sure you do not misplace the terminal cap. Al-
ways keep the terminal covered when an external
flash unit is not connected.
3. Remove the terminal cap and attach the flash
unit’s sync cable to the external flash sync ter-
minal.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-120
CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
4. Turn on camera power and make the required
camera settings.
• The external flash connected to the external flash
sync terminal always fires. To record an image without
using external flash, disconnect the sync cable from
the terminal or turn off external flash unit power.
• After recording an image, check it on the monitor
screen. If it is not what you expected, use the controls
on the external flash unit to adjust flash intensity, and
adjust the aperture and ISO sensitivity settings on the
camera. Note that you cannot control external flash
unit intensity using camera settings.
• Close up images often tend to be overexposed. If you
are having overexposure problems, try adjusting the
aperture and ISO sensitivity settings of the external
flash unit and the camera. You can also try using the
camera’s built in flash to correct for overexposure.
• Note that the camera’s built in flash fires whenever its
• Exposure Mode: M (Manual Exposure)
• Shutter Speed: Around 1/60 (Actual setting should be
in accordance with aperture setting.)
• For maximum brightness of areas that are not reached
by flash illumination, use the camera’s maximum ap-
erture opening (F3.2).
• White Balance: Sunlight
• Flash Mode:
(Off)
5. Turn on the external flash unit and set it up for
the camera’s aperture (F) value and sensitivity
value (page E-78).
• Depending on shooting conditions, proper exposure
may not be obtained even if you properly set the auto
aperture (F) value and ISO sensitivity of the flash unit
to match those of the camera. If this happens, adjust
the aperture value and ISO sensitivity settings of the
flash unit and camera.
Flash Mode setting is something other than
(Off).
The camera’s sensitivity is fixed at ISO 80 when the
built-in flash is turned on.
• Improper installation of an external flash unit can
cause it to fire unexpectedly or to misfire. Make sure
you install the external flash unit correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-121
CONNECTING TO EXTERNAL EQUIPMENT
• Camera aperture (F) values are based on the widest
Connecting to a Computer
optical zoom (1X). Using telephoto can cause slight
lens darkness. Adjust the aperture and ISO sensitivity
settings of the external flash unit and the camera as
required when using optical zoom.
The CD-ROM disc that comes bundled with your camera in-
cludes special software (Photo Loader) that makes transfer
of images from the camera to a computer quick and easy.
The following types of computer connections are supported.
• When using a zoom flash, set the coverage angle of
the flash for a focal distance of 40mm or less.
• The optical axis of the lens may not match that of the
external flash unit, even if the lens is pointed straight
forward. If this happens, try expanding the coverage
angle (decreasing the guide number) of the flash unit.
• ISO sensitivity values for a digital camera are slightly
different from those for silver oxide film. Because of
this, you may have to make adjustments of the ISO
setting of your external flash unit to obtain the desired
results.
■ Windows
USB port connection
Serial port (RS-232C) connection
■ Macintosh
USB port connection
• Photo Loader does not run on the Apple Macintosh. You
can, however, use the USB cable to connect the camera to
a Macintosh and upload images manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-122
CONNECTING TO EXTERNAL EQUIPMENT
■ Connecting to a Computer with the USB Cable
Small connector
USB Port Connection (Windows, Macintosh)
The camera’s USB port and accessories make it easy to
connect to a computer equipped with a USB port for image
data uploading and downloading. First install the USB driver
software from the bundled CD-ROM disc on your computer,
and then use its special USB cable to connect. Once con-
nected, your computer recognizes the camera as an external
storage device.
Special USB cable
(bundled with camera)
USB port
D C I N 6 V
A L D I G I T
V I D E O U O S U B T
• See the documentation on “Bundled Software User’s
Manual” for full details about connections, installing the
USB driver, minimum computer system requirements, and
other information.
Large connector
(standard USB
connector)
USB port
• Whenever connecting the USB cable to the camera, make
sure the arrow mark on the plug is aligned properly with the
arrow mark on the side of the camera’s terminal.
• Plug the USB connectors into the ports as far as they will
go. Incorrect connection can result in improper operation.
• The camera is not supplied power by the USB cable. Be
sure to use the optional AC adaptor to power the camera
whenever using a USB cable connection.
• Your camera requires a special QV Camera USB cable.
Connection using a standard USB cable is not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-123
CONNECTING TO EXTERNAL EQUIPMENT
• Never disconnect the USB cable while a data communica-
■ Windows
tion operation is in progress. Doing so can corrupt memory
data.
• USB data communication is supported in both the REC
mode and PLAY mode.
The Data Transfer Cable connects to an IBM PC/AT or com-
patible equipped with a D-Sub 9-pin RS-232C serial port, as
shown below.
Data Transfer Cable
• Be sure to disconnect the USB cable from the camera and
computer after you are finished exchanging data.
• You cannot turn off the camera while the USB cable is con-
nected. Disconnect the USB cable first when you want to
turn off the camera.
Serial port
(RS-232C D-Sub 9-pin)
USB VIDEO OUT DIGITAL
DC IN 6V
Using a Serial Port Connection
You can connect a computer to the camera’s DIGITAL termi-
nal for image data uploading and downloading. For such a
connection, you must install the Photo Loader software from
the bundled CD-ROM disc on your computer, and use a
separately available CASIO data transfer cable to make the
connection. The type of cable you should use depends on
what kind of computer you are connecting to.
DIGITAL terminal
• This manual covers actual physical connection proce-
dures. See the documentation on the Bundled Software
User’s Manual for full details about connections, installing
Photo Loader, and other information.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-124
CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
• Be sure to turn off the camera, computer, and all pe-
Using a Memory Card to Transfer Image Data
In addition to the cable connections described in the previ-
ous sections, you can also exchange data between your
camera and computer by reading it directly from the memory
card. The Photo Loader software that comes on the bundled
CD-ROM disc automatically reads the images from the
memory card and stores them in folders on your computer’s
hard disk.
The following provides general information about how to di-
rectly read images from a memory card. Certain details may
be different depending on the type of computer you are us-
ing.
ripherals connected to the computer (monitor, hard
disk, etc.) before connecting the camera to the com-
puter.
• After connecting the camera to the computer, slide the
REC/PLAY selector to “PLAY”, and then turn on the
camera. Data communication with a computer is dis-
abled while the camera is in the REC mode.
• Never connect or disconnect the cable while a data
communication operation is in progress. Doing so can
cause problems with program execution, can corrupt
data, and can damage the camera and your computer.
• Data transfer while camera batteries are low can re-
sult in unexpected shutdown of the camera. Because
of this, use of the optional AC adaptor is recom-
mended whenever performing data communication
with the camera.
■ Computer Equipped with a CompactFlash Card Slot
Simply insert the memory card into your computer’s
CompactFlash card slot.
• This camera does not support data communication
with any of the optionally available CASIO PC link
software applications: LK-1, LK-1A, LK-10V, LK-11W,
LK-2, LK-2A, LK-2V, LK-21.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-125
CONNECTING TO EXTERNAL EQUIPMENT
■ Computer Equipped with a PC Card Slot
Memory Card Data
For this configuration, you will need to purchase a separately
available CASIO PC Card Adapter (CA-10). See the instruc-
tions that come with the PC Card Adapter for information
about how to use it.
Images recorded with this camera and other data is stored
on the memory card using DCF (Design rule for Camera File
system) protocol. DCF protocol is designed to make it easier
to exchange image and other data between digital cameras
and other devices.
DCF Protocol
DCF devices (digital cameras, printers, etc.) can exchange
images with each other. DCF protocol defines the format for
image files data and the directory structure for the memory
card, so images can be viewed using another manufacturer’s
DCF camera or printed on a DCF printer. In addition to sup-
port for the DCF protocol, your CASIO digital camera also use
dates in image folder names and image file names, which
helps to make data management easier.
■ Another Computer
To access the contents on the memory card on a computer
that does not have a CompactFlash card slot or PC card slot,
use a commercially available PC card reader/writer in combi-
nation with a separately available CASIO PC Card Adapter
(CA-10). See the instructions that come with the PC card
reader/writer and the PC Card Adapter for information about
how to use them.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-126
CONNECTING TO EXTERNAL EQUIPMENT
■ Folder and File Contents
Memory Card File Structure
• Parent Folder
Contents: All files used by the digital camera
<¥DCIM¥>
(Parent Folder)
INDEX.HTM
QVCAM.QVS
(Card Browser Main File)
(Management File)
• Card Browser Main File
Contents: Template for card browser, which is used for
viewing image previews with a web browser
HTML
(Card Browser Folder)
INDEX2.HTM
MENU.HTM
Card Browser Files: Files and folders
required for the Card Browser display
(
)
)
• Management File
Contents: Information about folder management, image
sequence, etc.
100_MMDD
(Main Image Folder)
(Management File)
(Main Image File)
(Main Image File)
(Main Movie File)
100_MMDD.QVS
MMDD0001.JPG
MMDD0002.JPG
MMDD0003.AVI
• Card Browser Folder
Contents: Files used by the card browser
• Card Browser File
Contents: Data used by the card browser
PREVIEW
(Preview Folder)
Card Browser Files: Files and folders
required for the Card Browser display
(Preview Image File)
DATA.HTM
(
INDEX1.HTM
MMDD0001.JPG
MMDD0002.JPG
MMDD0003.JPG
• Main Image Folder
Contents: Image files recorded by the camera
(Preview Image File)
(Preview Image File for Movie File)
• Main Image File
Contents: Still image file recorded by the camera
101_MMDD
102_MMDD
(Image Folder)
(Image Folder)
• Main Movie File
Contents: Movie file recorded by the camera
<¥MISC¥>
(DPOF File Folder)
(DPOF File)
AUTPRINT.MRK
• Preview Folder
Contents: Preview images
Download from Www.Somanuals.com. All Manuals Search And Download.
E-127
CONNECTING TO EXTERNAL EQUIPMENT
• Preview Image File
Precautions when Using a Memory Card
on a Computer
Contents: Preview images of still image and movie files
used for temporary playback and card browser
previews
• This camera uses management files to manage the se-
quence and attributes of image files. Because of this, if you
use your computer to modify or delete memory card files, to
change management file contents, or to change image file
sequence and attributes and then transfer the images back
to the camera, you may end up with the wrong image se-
quence, ungrouped panorama images, and slow image
scrolling.
• When transferring memory card contents to a hard disk,
floppy diskette, MO disk, or other external storage, keep
the contents of each DCIM folder together, and never use
your computer to edit or delete the management files
(those whose file names have the extension .QVS).
Changing the name of the DCIM folder to a date is a good
way to keep track of your images. However, be sure to
change the name of this folder back to DCIM if you ever
copy it back to the memory card for playback on the cam-
era. The camera does not recognize any folder name be-
sides DCIM.
• DPOF File Folder
Contents: DPOF files
NOTE
• A memory card’s actual file structure may differ some-
what in accordance with the type of Card Browser you
are using (page E-130).
Image Files Supported by the Camera
• Image files recorded with the CASIO QV-2300UX or QV-
2800UX Digital Camera
• DCF protocol image files
• Image file containing an image with a maximum width of
1,600 pixels and maximum height of 1,200 pixels.
• Maximum image file size of 1 Mbytes.
• The above is also true about the names of folders inside
the DCIM folder. These folders must be returned to the
names assigned to them by the camera whenever you
copy the folder back to the memory card for playback on
the camera.
Certain DCF functions may not be supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-128
CONNECTING TO EXTERNAL EQUIPMENT
• We also strongly recommend that after transferring data
from a memory card to other external storage that you re-
format the memory card and delete its contents before us-
ing it to record more images.
• The camera formats memory cards using ATA format,
which means that a Macintosh sees all memory card files a
text files. To view memory card files on a Macintosh, use
PC Exchange to associate the files on the memory card
(which are JPEG files) with an application that is able to
open JPEG files.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-129
CONNECTING TO EXTERNAL EQUIPMENT
Specifying the Card Browser Type
Using the HTML Card Browser
The camera’s Card Browser generates HTML files that let
you see a table of image thumbnails for easy selection, and
even view the properties of each image.
1. Enter the REC mode or PLAY mode.
2. Press MENU.
• Card Browser files can be viewed using the Web browsers
listed below. Movie files require QuickTime.
3. Select “Card Browser” using one of the follow-
ing two key operations, and then press the
shutter release button.
Microsoft Internet Explorer 4.01 or later
Netscape Communicator 4.5 or later
If you are here
REC mode
Select this on the menu screen
“FUNCTION”
“SET UP”
“SET UP”
“Card Browser”
PLAY mode
“Card Browser”
Download from Www.Somanuals.com. All Manuals Search And Download.
E-130
CONNECTING TO EXTERNAL EQUIPMENT
4. Select the Card Browser setting you want.
5. After selecting the setting you want, press the
shutter release button.
When you want this
To turn off the Card Browser (no HTML files
generated)
Select this
• When a Card Browser type is selected, a file named
“INDEX.HTM” is created inside the “DCIM” folder
whenever you turn off the camera. Other files are also
created and stored on the memory card at this time.
Off
Maximum performance, including access to
image properties and slideshow capabilities
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Light image viewing with access to image prop-
erties
• Pressing
in place of the shutter release button
Type1
Type2
in step 5 immediately starts creation of Card Browser
files, which is indicated by the message “One moment
please...” on the monitor screen. Never turn off cam-
era power while this message is on the display.
NOTE
Basic image viewing with slideshow capabili-
ties
• If the memory card in the camera has a large number
of files on it, it may take quite a bit of time for the cam-
era to create the required HTML files and turn off. Be-
cause of this, we recommend that you normally leave
the Card Browser turned off. We suggest that you turn
off the Card Browser if you normally do not need to
use it. The power down routine performed by the cam-
era is much shorter when the Card Browser is turned
off.
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Basic image viewing
Type3
Type4
Download from Www.Somanuals.com. All Manuals Search And Download.
E-131
CONNECTING TO EXTERNAL EQUIPMENT
IMPORTANT!
• When the Card Browser is turned on, the monitor
Viewing Card Browser File Contents
Use your computer’s Web Browser to view the contents of
the Card Browser files.
screen goes blank when you turn off the camera, but
the operation lamp continues to flash for some time as
the camera internally creates Card Browser files. Per-
forming any of the operations listed below while the
operation lamp is flashing not only stops creation of
Card Browser files, it can also result in corruption of
the image data on the memory card.
1. Transfer the image data from the camera to
your computer by cable (page E-122) or by ac-
cessing the memory card from your computer
(page E-125).
• Opening the memory card slot cover
• Unplugging the AC adaptor
• Removing the camera’s batteries
• Other actions similar to those above
2. On the memory card, open the folder named
“DCIM”.
• Note that Card Browser files may be corrupted if bat-
teries go low or if the memory card becomes full dur-
ing file generation.
• You can specify the language for the Card Browser’s
on-screen text using the procedure under “Changing
the Display Language” (page E-114).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-132
CONNECTING TO EXTERNAL EQUIPMENT
3. Use your Web browser to open the file named
4. You can click the following items on the screen
to perform the operations described below.
“INDEX.HTM”.
• This displays a gallery of thumbnails for all the images
contained in the oldest image folder on the memory
card.
To do this
Click here
AUTO
Start an automatic slideshow of full-screen
size images (5-second interval)
Start a manual slideshow of full-screen size
images (image changes with click)
MANUAL
• Tapping an image on the INDEX screen or DATA
screen displays a 640 x 480-pixel version of the im-
age. Clicking the full-screen images displays the im-
age in the size at which it was recorded.
IMPORTANT!
• Slideshow images are displayed in full-screen size,
regardless of the size at which they were recorded.
• The thumbnail gallery uses the contents of the Pre-
view Folder (page E-127). Images copied from an-
other digital camera or a computer do not have pre-
view images associated with them, so their thumbnails
do not appear in the thumbnail gallery. If this happens,
scroll through the images on the camera’s monitor
screen until the copied image appears. At this time,
the camera automatically generates a preview image,
which will now appear in the Card Browser thumbnail
gallery.
Folder name
Thumbnail
File name
Download from Www.Somanuals.com. All Manuals Search And Download.
E-133
CONNECTING TO EXTERNAL EQUIPMENT
• Image Properties
The following is the information provided by the Image
Properties screen.
File Size
Resolution
Quality
: File size
: Resolution
: Quality
Recording mode : Recording mode
AE
: Exposure mode
: Metering mode
: Shutter speed
: Aperture stop
Light metering
Shutter speed
Aperture stop
INDEX
Exposure comp : Exposure compensation
Focusing mode : Focusing mode
Flash mode
Sharpness
Saturation
Contrast
: Flash mode
: Sharpness
: Saturation
: Contrast
White balance
Sensitivity
Filter
: White balance
: Sensitivity
: Filter setting
Enhancement
Flash intensity
Digital zoom
Date
: Enhancement setting
: Flash intensity
: Digital zoom setting
: Recording date and time
: Camera model name
DATA
Model
Download from Www.Somanuals.com. All Manuals Search And Download.
E-134
CONNECTING TO EXTERNAL EQUIPMENT
5. To exit the Card Browser, simply quit your Web
browser.
Saving Card Browser Files
• To save Card Browser files, use a USB cable connection
(page E-123) or memory card transfer (page E-125) to
copy the folder named “DCIM” on the memory card to a
hard disk, floppy diskette, MO disk, or other external stor-
age. Never use your computer to edit or delete files, to add
new images, or to delete images. Doing so will make it im-
possible to view image normally using the Card Browser.
• Never edit or delete any of the files inside the “DCIM”
folder. You can use the Photo Loader application con-
tained on the bundled CD-ROM disc to save Card Browser
files. See the documentation that comes with Photo Loader
on the disc for full details.
• We also strongly recommend that after transferring data
from a memory card to other external storage that you re-
format the memory card and delete its contents before us-
ing it to record more images.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-135
REFERENCE
Sensitivity
Filter
ISO 80 / ISO 160 / ISO 320
Off / B/W / Sepia / Red / Green / Blue /
Yellow / Pink / Purple
ć
ć
Camera Menus
The following shows lists of menus that appear in the REC
mode and PLAY mode, and their settings.
Exposure Mode P / A / S / M
ć
ć
Metering
Multi / Center / Spot
Auto / Daylight / Shade / Tungsten /
Fluorescent / Manual
Off / Red / Green / Blue / Flesh Tones
Off / On
• The settings that are underlined in the following table are
initial defaults.
• “ć” indicates items that can be included as part of a short-
cut (page E-91).
White Balance
ć
Enhancement
Grid
ć
ć
ć
ć
ć
ć
Flash Intensity
Sharpness
Saturation
Contrast
Strong / Normal / Weak
Hard / Normal / Soft
High / Normal / Low
High / Normal / Low
Off
REC mode
NORMAL
PORTRAIT
LANDSCAPE
NIGHT SCENE
SCENE
Time Stamp
Year / Month / Day
ć
Day Hour:Minutes
Year / Month / Day Hour:Minutes
Off / Auto / X2 / X4
MOVIE
Digital Zoom
Sleep
ć
ć
ć
ć
ć
ć
ć
ć
ć
MOVIE (PAST)
PANORAMA
INTERVAL
Off / 30sec / 1min / 2min
2min / 5min
Auto Power Off
Mode Memory
Recording Mode
Sensitivity
Off / On
Off / On
Off / On
Off / On
Off / On
Off / On
Size/Quality
1600 x 1200 / Fine
1600 x 1200 / Normal
1600 x 1200 / Economy
Exposure Mode
Metering
ć
800 x 600
800 x 600
800 x 600
/ Fine
White Balance
Flash
/ Normal
/ Economy
Download from Www.Somanuals.com. All Manuals Search And Download.
E-136
REFERENCE
Mode Memory
SET UP
Focus
Off / On
ć
PLAY mode
Digital Zoom
Flash Intensity
Indicators
Off / On
ć
ć
ć
ZOOM
Off / On
DELETE
DPOF
Select / Folder / All
Select / Folder / All
Select / Folder / All
Off / On
Card Browser
Off /
PROTECT
SLIDE SHOW
SET UP
Type1 / Type2 /
Type3 / Type4
Off / On
ć
ć
ć
Indicators
Off / On
Beep
Off / Type1 / Type2 /
Type3 / Type4
Off / On
Date Style
Year / Month / Day
Day / Month / Year
Month / Day / Year
Time setting
English / Japanese
No / Yes
Card Browser
Beep
Date Style
Year / Month / Day
Day / Month / Year
Month / Day / Year
Time setting
Date / Time
Language
Format
ć
ć
ć
ć
Date / Time
Language
Format
VIDEO OUT
NTSC / PAL
Off / Mode1 /
Mode2 / Mode3
No / Yes
English / Japanese
No / Yes
LINK*
ć
ć
VIDEO OUT
NTSC / PAL
Restore
Off / Mode1 / Mode2 /
Mode3
LINK*
* This function is not available with this model.
Restore
No / Yes
* This function is not available with this model.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-137
REFERENCE
Scene List
The following list shows all of the scenes that are available in the Scene Mode.
No.
1
Scene
Landscape with People
Landscape with People
Face
Remarks
Displays a composing frame.
Displays a composing frame.
2
3
Displays a composing frame. Blurs the background.
Displays a composing frame. Blurs the background.
Displays a composing frame. Blurs the background.
Displays a composing frame. Blurs the background.
Macro Mode with high saturation
4
Face and Chest
Full Front
5
6
Two Subjects
7
Floral Close Up
Flower Field
8
High saturation
9
Forest
Hard sharpness, high saturation, enhanced greens
Hard sharpness, high saturation, enhanced reds
10
11
12
13
14
15
16
17
18
19
20
21
Autumn Leaves
Blue sky
∞ focus, enhanced blues
∞ focus, red filter, daylight white balance
Sunset
Bright Beach
Enhanced blues
Night Scene
Slow shutter speed, ∞ focus, daylight white balance Use of a tripod recommended.
Slow shutter speed, flash on, daylight white balance Use of a tripod recommended.
Slow shutter speed, flash on, daylight white balance Use of a tripod recommended.
Small aperture, bulb shutter, ∞ focus, daylight white balance Use of a tripod recommended.
Small aperture,bulb shutter, ∞ focus, daylight white balance Use of a tripod recommended.
Slow shutter speed On an overcast day,use an ND filter.
Fast shutter speed Dim lighting may result in underexposure.
Fast shutter speed Dim lighting may result in underexposure.
Night Scene with People
Night Scene with People
Fireworks
Dancing Lights
Flowing Water – Soft
Flowing Water – Stopped
Stopped Action
Download from Www.Somanuals.com. All Manuals Search And Download.
E-138
REFERENCE
No.
22
23
24
25
26
27
28
29
30
31
Scene
Remarks
Structures
Food
Hard sharpness
Macro Mode with high saturation
Text
Macro mode, B/W filter, hard sharpness, high contrast
Blue filter
Special Effects 1
Special Effects 2 (Night Mood)
Special Effects 3
Special Effects 4
User Setup
Negative EV shift, blue filter
High contrast, B/W filter
Low contrast, sepia filter
Records images using a set up you saved.
Records images using a set up you saved.
Records images using a set up you saved.
User Setup
User Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
E-139
REFERENCE
Scene Mode Camera Setups
Settings
No.
Focus Mode
Shutter Speed
Aperture
EV Shift
Sensitivity
Filter
Exposure Mode
Metering
1
2
3
4
5
6
7
8
Auto Focus
Auto Focus
Auto Focus
Auto Focus
Auto Focus
Auto Focus
(Macro)
Auto Focus
Auto Focus
Auto Focus
(Infinity)
(Infinity)
Auto Focus
(Infinity)
Auto Focus
Auto Focus
(Infinity)
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
BULB
BULB
1/30
1/1000
1/1000
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Small
Small
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
0
0
0
0
0
0
0
0
–0.7
0
0
0
+0.7
0
0
0
0
0
0
0
0
0
0
+1
0
–2
0
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 160
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
ISO 80
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Red
Off
Off
Off
Off
Off
Off
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
M
M
S
S
S
P
P
P
P
P
P
P
Multi
Multi
Multi
Multi
Multi
Multi
Multi
Multi
Center
Multi
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Multi
Multi
Center
Center
Center
Center
Center
Center
Center
Center
Center
Multi
Multi
Center
Multi
Center
Multi
Multi
(Infinity)
Auto Focus
Auto Focus
Auto Focus
Auto Focus
(Macro)
Off
Off
Off
Off
Off
(Macro)
B/W
Blue
Blue
B/W
Sepia
Auto Focus
Auto Focus
Auto Focus
Auto Focus
0
Download from Www.Somanuals.com. All Manuals Search And Download.
E-140
REFERENCE
Settings
No.
White Balance
Enhancement
Flash Intensity
Sharpness
Saturation
Contrast
Flash Mode
Composition
Outline
1
2
3
4
5
6
7
8
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Daylight
Auto
Daylight
Daylight
Daylight
Daylight
Daylight
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Off
Off
Normal
Normal
Normal
Normal
Normal
Normal
Weak
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Weak
Normal
Normal
Soft
Soft
Soft
Normal
Normal
Normal
Hard
Normal
Normal
Normal
Normal
Normal
Normal
High
High
High
High
Normal
High
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
High
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
High
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
(Off)
(On)
(On)
(Off)
(Off)
(Off)
Auto
Auto
Auto
Auto
(Off)
Auto
Auto
Auto
Auto
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Flesh Tones
Flesh Tones
Flesh Tones
Flesh Tones
Off
Off
9
Green
Red
Blue
Off
Blue
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Hard
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Hard
Normal
Hard
Normal
Hard
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
Normal
High
Off
Off
Auto
Low
No
Download from Www.Somanuals.com. All Manuals Search And Download.
E-141
REFERENCE
Mode Settings
Settings in Each Mode
: Available ̅ : Partially available – : Not available
ć
Partial Shutter Release
Button Press
Focus
Frame
Display
Flash
Mode
Self-timer
AF
AE
Lock
Lock
Normal
ć
ć
ć
ć
ć
҂
҂
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
҂
҂
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
҂
҂
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
҂
ć
҂
ć
ć
̅
̅
ć
ć
ć
ć
ć
҂
҂
ć
ć
ć
ć
ć
ć
Portrait
Landscape
Night Scene
Scene
Movie (Normal)
Movie (Past)
Panorama
Interval
P Mode
A Mode
S Mode
M Mode
̅ : The camera will not enter the Self-timer Mode while the shutter speed it set to “BULB”.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-142
REFERENCE
Recording Mode + Exposure Mode Combinations
The following table shows to what extent each recording mode can be
used in combination with each exposure mode.
: Available ̅ : Partially available – : Not available
ć
Exposure Mode
P Mode
A Mode
S Mode
M Mode
Normal
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
ć
҂
҂
ć
̅
ć
ć
ć
ć
ć
҂
҂
ć
̅
Portrait
Landscape
Night Scene
Scene
Movie (Normal)
Movie (Past)
Panorama
Interval
̅ : Entering the Interval Mode while “BULB” is selected as the shutter speed
automatically changes the shutter speed to 1 second.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-143
REFERENCE
Troubleshooting
Symptom
No power
Probable Cause
Action
1. Batteries are not oriented correctly.
2. Batteries are dead.
1. Load batteries correctly (page E-31).
2. Replace batteries with a full set of new ones
(page E-31).
3. Using the wrong AC adaptor.
3. Use only the specified AC adaptor.
Sudden loss of power
1. Activation of Auto Power Off (page E-36).
2. Dead batteries
1. Turn power back on.
2. Replace batteries with a full set of new ones
(page E-31).
indicator on the moni-
tor screen
Batteries are low.
Replace batteries with a full set of new ones (page
E-31).
No recording when the
shutter release button is
pressed
1. The REC/PLAY selector is set to “PLAY”.
2. Flash unit is charging.
3. The message “MEMORY FULL” is on the
monitor screen.
1. Slide to REC/PLAY selector to “REC”.
2. Wait until flash unit charging is finished.
3. Delete images you no longer need from camera
memory or change to another memory card.
4. Load a memory card.
4. No memory card loaded in the camera
Unable to focus properly
with Auto Focus
1. Dirty lens
2. Subject is outside the focus frame.
1. Clean the lens.
2. Compose the image so the subject is inside the
focus frame.
3. Conditions make it impossible to obtain proper
focus.
3. Switch to the Manual Mode and focus manually
(page E-57).
4. Camera is unsteady or shaking.
4. Use a tripod.
Recorded image is blurred.
Improper focus
Make sure the subject on which you want to focus is
inside the focus frame.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-144
REFERENCE
Symptom
Probable Cause
Batteries are dead.
Action
Power failure during self-
timer operation.
Replace batteries with a full set of new ones (page
E-31).
Monitor screen image is out
of focus.
1. Poor focusing in the manual focus mode.
2. Attempting to record scenery or portraits in the
Macro Mode.
1. Focus the image (page E-57).
2. Use Auto Focus for scenery and portraits.
3. Attempting to use the Auto Focus mode for a
subject that is too close.
3. Use the Macro Mode for close ups.
Recorded image is not
saved.
1. Batteries going low before the image save op-
eration is complete.
1. Replace batteries with a full set of new ones.
2. Opening of the memory card slot cover before
the image save operation is complete.
2. Keep the memory card cover closed until the
image save operation is complete.
Colors of recorded image
are different from those on
the monitor screen.
1. Direct sunlight or light from another source shin-
ing into the lens.
2. Image quality setting
1. Reorient the camera so that light is not shining
directly into lens.
2. Change to a higher image quality for recording.
[+] and [–] operations do not
work while the 9-image view
is on the monitor screen.
You are operating the [+] and [–] buttons while the
scroll operation is still being performed.
Wait until image scrolling is complete before press-
ing [+] or [–].
Cannot display a particular
image.
Memory card images recording using a camera that
does not support DCF.
The file management systems of cameras that do
not support DCF are different from the one used by
this camera. This camera cannot read cards re-
corded with such cameras.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-145
REFERENCE
Symptom
Probable Cause
Action
Monitor screen contents do
not appear on the screen of
a connected TV.
1. Incorrect camera-TV connection
2. Wrong TV settings
1. Connect correctly using the video cable (page E-
117).
2. Check the documentation that comes with the
TV and set it up correctly for video input.
3. Select the video output mode that suits the type
of equipment you are using (page E-118).
3. Wrong video signal output mode
Cannot access the delete
screen.
All images on the memory card are protected.
Unprotect the images you want to delete (page E-
107).
Cannot select menu items
in the PLAY mode.
1. Some functions cannot be selected for playback
of certain types of images.
1. Select a different function or change to another
image.
2. No images stored on the memory card.
2. Record an image to make the functions avail-
able.
All buttons and switches are
dead.
Circuit damage due to static electrical charge from
connected device or due to strong impact.
Remove batteries and disconnect the AC adaptor if
you are using one. Restore power and turn the
camera on. If this does not work, contact your
dealer or an authorized CASIO service provider.
Nothing appears on the
monitor screen.
1. The monitor is asleep.
2. Communication over the USB cable is in
progress.
1. Wake up the monitor (page E-36).
2. After the communication operation over the USB
cable is complete, unplug the USB cable from
the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-146
REFERENCE
Messages
1. Press MENU.
RECORD ERROR
Some problem occurred when compressing image
data to save it on the memory card. Shoot the image
again.
There are no images There is no image data stored on the memory card.
on this memory card!
This camera cannot The image file you are trying to view is corrupted, or
display the image
you selected!
it was recorded with a camera whose image file for-
mat is not supported by this camera.
2. Use [+] and [–] to select “Yes”, and then press
the shutter release button.
• To cancel this procedure, press MENU.
• Whenever formatting a memory card, be sure to
use the AC adaptor to power the camera or re-
place its batteries with a full set of new alkaline or
lithium batteries before starting. Unexpected loss
of power can result in incomplete formatting and
improper operation of the memory card.
REPLACE BATTERY! Battery power is low. Camera power turns off auto-
matically shortly after this message appears.
NO FORMAT
MENU
The memory card you are using is not formatted.
You must format the memory card before you can
use it to store images (page E-40).
• The message “There are no images on this
memory card!” appears on the monitor screen af-
ter formatting is complete.
CF ERROR
There is some problem with the memory card you
You must format the are using. Perform the following procedure to cor-
CompactFlash card rect the problem.
before using it with
There is no memory card loaded in the camera.
Insert memory card! Load a memory card (page E-38).
this camera.
FORMAT
Warning!
The following procedure deletes all files currently
MENU
stored on the memory card. Before proceeding,
try to back up the contents of the memory card
onto your computer’s hard disk drive or some
other type of external storage medium.
MEMORY FULL
Change quality or
delete unneeded
images
There is not enough memory to record an image
with your current quality and size settings. Change
the image quality and size settings and try again, or
delete some images from the memory card (page E-
101).
Download from Www.Somanuals.com. All Manuals Search And Download.
E-147
REFERENCE
MEMORY FULL
Delete unneeded
images
• There is not enough memory for further recording.
Delete some images you don’t need from memory
card (page E-101).
• The DCIM folder or other file (page E-127) cannot
be created due to insufficient memory when
downloading data from a computer to the memory
card. Use your computer to delete unneeded im-
ages to free up memory card space for the images
you are downloading. You could also press the
MENU button and format the memory card in the
camera, but doing so deletes all image files cur-
rently stored on the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-148
REFERENCE
Movie
Specifications
Storage Capacity
Recording Time
Approximately 300KB/second
16 seconds per movie
Description ......................... Digital camera
•
The above figures are approximations only.
Model .................................. QV-2300UX/QV-2800UX
Image Deletion ................... Single image; all images in a folder; all im-
ages in memory (with image protection)
Recorded Image
File Format ......................... Still images (including panoramas):
JPEG (Exif. Ver. 2.1), DCF standard
(Design rule for Camera File system),
DPOF compatible, Movies: AVI
Imaging Element ................ 1/2.7-inch CCD (Total Pixels: 2.11 mil-
lion, Effective Pixels; 2.02 million)
Lens .................................... • QV-2300UX
F2.8 to 4.5; f = 6.2 to 18.6mm (equiva-
lent to 41 to 123mm lens for 35mm film)
• QV-2800UX
Recording Medium ............ CompactFlash card (Type I/II)
Recorded Image Size ........ 1600 x 1200 pixels, 800 x 600 pixels
F3.2 to 3.5; f = 6 to 48mm (equivalent
to 40 to 320mm lens for 35mm film)
Standard Memory Capacity, Number of Image Files,
Computer Output Image Size
Zoom ................................... • QV-2300UX
Optical zoom, 3X; Digital zoom: 12X
(in combination with optical zoom)
• QV-2800UX
Still
Number of images
Image
size
(pixels)
Quality
File size
8MB
memory card
64MB
memory card
340MB
Microdrive
Optical zoom, 8X; Digital zoom: 32X
(in combination with optical zoom)
Image size is 800 x 600 pixels when 4X
digital zoom is used.
1600
x
1200
850
8
71
401
FINE
KB/image
images
images
images
600
KB/image
11
images
99
images
562
images
NORMAL
ECONOMY
FINE
350
KB/image
19
images
167
images
943
images
Focusing ............................. Contrast-detect Auto Focus; manual fo-
800
x
600
200
KB/image
33
images
282
images
1587
images
cus with macro mode and focus lock
Focus Range ...................... • QV-2300UX
Normal focus:10cm to ∞ (1X zoom)
50cm to ∞ (3X zoom)
150
KB/image
43
images
365
images
2054
images
NORMAL
ECONOMY
120
KB/image
53
images
443
images
2494
images
Macro focus: 1cm to 50cm (1X zoom)
Manual focus:1cm to ∞ (1X zoom)
50cm to ∞ (3X zoom)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-149
REFERENCE
• QV-2800UX
Built-in Flash
Normal focus:40cm to ∞ (1X zoom)
Flash Modes:................... AUTO, OFF, ON, Red eye reduction
Flash Range: ................... • QV-2300UX
Approximately 0.5 to 2 meters
• QV-2800UX
1m to ∞ (8X zoom)
Macro focus: 1cm to 50cm
(1 to 1.6X zoom)
Manual focus:1cm to ∞ (1X zoom)
Approximately 0.5 to 2.5 meters
1m to ∞ (8X zoom)
Recording Functions ........ Normal, movie, panorama, landscape,
The focusing range is the distance from
the lens surface to the subject.
night scene, portrait, self-timer, macro,
scene
Exposure Control
Monitor................................ 1.8" TFT, low-glare color HAST LCD
Light Metering: ................ Multi-pattern, center point, spot by CCD
Exposure: ........................ Program AE, Aperture priority AE, Shut-
ter priority AE
(122,100 pixels, 555 x 220)
Viewfinder .......................... LCD Monitor or optical viewfinder
Exposure
Compensation: ................ –2EV to +2EV (1/3EV units)
Clock ................................... Built-in quartz digital timepiece for time
and date recording and storage with im-
Shutter ................................ CCD electronic shutter; mechanical
age data; auto calendar up to 2049
shutter, BULB, 60 to 1/2000 second
Input/Output Terminals .... DIGITAL IN/OUT, USB port (special
mini port), AC adaptor connector,
Aperture .............................. • QV-2300UX
F2.8, F5.6, auto switching or manual
switching
VIDEO OUT (NTSC, PAL), External
flash sync terminal (QV-2800UX)
• QV-2800UX
F3.2, F4.8, F8, auto switching or
manual switching
Power Supply ..................... Four AA-size alkaline or lithium batteries
Four AA-size nickel-metal hydride re-
chargeable batteries (NP-H3)
White Balance .................... Automatic, fixed (4 modes), manual
AC adaptor (AD-C620)
AC adaptor charger (BC-3HA)
switching
Self-timer ............................ 10 seconds, 2 seconds
Download from Www.Somanuals.com. All Manuals Search And Download.
E-150
REFERENCE
Battery Life
• This camera does not have a separate battery to power its clock.
Clock settings are cleared whenever power to the camera is cut off
(by batteries going dead while the camera is not connected to an
AC power outlet with the AC adaptor) for about 24 hours. After
power is resumed, either by loading fresh batteries or connecting to
an AC power outlet, you will have to set the correct time and date
again.
The values noted below indicate the number of hours before battery failure
under normal operating temperature (25°C). These values are for reference
only, and do not guarantee that any particular set of batteries actually will
provide the service life indicated. Low temperatures shorten battery life.
Type of
Operation
AA-size Alkaline AA-size Lithium AA-size Ni-MH
Batteries LR6
Batteries FR6
Batteries NP-H3
Continuous
Playback
• The liquid crystal panel built into this camera is the product of preci-
sion engineering, with a pixel yield of 99.99%. This also means,
however that 0.01% of the pixels can be expected to fail to light or
to remain lit at all times.
170 minutes
300 minutes
180 minutes
Continuous
Recording
80 minutes
(480 shots)
200 minutes
(1200 shots)
120 minutes
(720 shots)
•
•
The above figures are approximations only.
The above guidelines are based on the following battery types:
Alkaline: MX1500 (AA) DURACELL ULTRA
Lithium: Energizer
•
Battery life varies with brand.
Continuous recording values show the number of shots without using the
flash. The number of shots depends on use of the flash and whether flash
is turned on or off.
Power Consumption ......... • QV-2300UX Approximately 5.3W
• QV-2800UX Approximately 5.8W
Dimensions ........................ • QV-2300UX 118(W) x 67(H) x 54(D) mm
•
QV-2800UX 121(W) x 80.5(H) x 66(D) mm
Weight ................................. • QV-2300UX Approximately 245g
• QV-2800UX Approximately 295g
(excluding batteries)
Standard Accessories ...... 8MB CompactFlash memory card,
Strap; lens cap; cap holder; soft case;
USB cable; video cable; data transfer
cable; CD-ROM; four LR6 alkaline
batteries; Basic Reference, Bundled
Software User’s Manual; Soft case
strap (QV-2800UX); Wired remote
controller (QV-2800UX)
Download from Www.Somanuals.com. All Manuals Search And Download.
E-151
|