Casio Digital Camera CASSIOPEIA User Manual

BE-300  
Getting Started with  
the CASSIOPEIA  
(Hardware Manual)  
User documentation consists of two manuals:  
CASSIOPEIA User’s Guide and this booklet. Be  
sure to read this manual first.  
Be sure to read the Safety Precautions contained in  
this manual to ensure proper operation of this  
product.  
Keep this manual in a safe place for future  
reference.  
E
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Congratulations upon your selection of the CASSIOPEIA. Be sure to read the following  
Safety Precautions before trying to use it for the first time.  
Note  
All mentions of “the unit” in the following precautions refer to the CASSIOPEIA.  
Markings and Symbols  
The following are the meanings of the markings and symbols used in these Safety  
Precautions.  
This symbol indicates information that, if ignored or applied  
incorrectly, creates the danger of death or serious personal injury.  
Danger  
This symbol indicates information that, if ignored or applied  
incorrectly, creates the possibility of death or serious personal  
injury.  
Warning  
This symbol indicates information that, if ignored or applied  
incorrectly, creates the possibility of personal injury or property  
damage.  
Caution  
A diagonal line indicates something you should not do. The symbol shown  
here indicates you should not try to take the unit apart.  
A black circle indicates something you should do. The symbol shown here  
indicates you should unplug the unit from the wall outlet.  
Health Precautions  
Warning  
Long continuous use of the unit when you are tired is not good for your  
health, and should be avoided.  
Caution  
Be sure to allow for adequate rest when using the unit for  
long periods. As a general rule, you should allow for 10 to 15 minutes of rest  
per hour.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Precautions During Use  
Warning  
Abnormal Conditions  
Continued use of the unit while it is emitting smoke or strange odor creates  
the danger of fire and electrical shock. Immediately turn off power, unplug  
the AC adapter from the wall outlet, remove batteries, and contact your  
original dealer or an authorized CASIO service provider to request  
servicing.  
Water and Foreign Matter  
Should any foreign matter (metal, water or other liquid) ever get into the  
unit, immediately turn off power, unplug the AC adapter from the wall  
outlet, remove batteries, and contact your original dealer or an authorized  
CASIO service provider to request servicing.  
Dropping and Damage  
Should the unit ever fall or otherwise become damaged, unplug the AC  
adapter from the power outlet, remove batteries, and contact your original  
dealer or an authorized CASIO service provider. Continued use creates the  
danger of fire and electrical shock.  
Disassembly  
Never try to take the unit apart or modify it in any way. Doing so creates the  
danger of fire and electrical shock.  
Handling the Stylus  
Take care when using the stylus to avoid accidentally injuring your eyes or  
the eyes of other. Careless use of the stylus creates the risk of loss of sight or  
eye damage.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Caution  
Memory Protection  
Be sure to keep separate copies of all important data by saving it on a  
computer hard disk or other medium. Note that all data stored in unit  
memory is deleted whenever batteries go dead. Memory contents can also  
become lost or corrupted due to malfunction and repair of the unit.  
Location  
Do not locate the unit in an area subjected to large amounts of humidity or  
dust. Doing so can create the danger of fire and electrical shock.  
Keep the unit away from food preparation area, stoves, and anywhere else it  
might be exposed to oil smoke or steam. Such conditions can create the  
danger of fire and electrical shock.  
Avoid unstable surfaces.  
Never place the unit on an unstable surface, on a high shelf, or in any other  
unstable location. Doing so can create the danger of the unit falling and  
causing personal injury.  
Built-in Battery Pack  
Warning  
Always leave built-in battery pack replacement up to an authorized service  
technician. Attempting to replace the battery pack yourself creates the risk  
of fire, personal injury, and other problems.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
AC Adapter  
Warning  
Never use a voltage that is different from that for which the AC adapter is  
rated. Also, do not plug the unit into a power outlet that is shared by other  
devices. Doing so creates the danger of fire and electrical shock.  
Never modify the power cord or excessively bend, twist, or pull it. Doing so  
creates the danger of fire and electrical shock.  
Do not allow the power cord to become damaged. Do not place heavy  
objects on the power cord or expose it to heat. A damaged power cord  
creates the danger of fire and electrical shock.  
Never touch the AC adapter while your hands are wet. Doing so creates the  
danger of electrical shock.  
Should the power cord ever become seriously damaged (internal wiring  
exposed or shorted), contact your original dealer or an authorized CASIO  
service provider to request servicing. Continued use of a seriously damaged  
power cord creates the danger of fire and electrical shock.  
Use only the AC adapter specified for this unit. Use of another type of AC  
adapter can damage the battery pack and create the danger of fire and  
personal injury.  
Caution  
Unplug the AC adapter from the wall outlet whenever leaving the unit  
unattended for long periods.  
At least once a year, unplug the AC adapter from the power outlet and clean  
the area around the prongs of the plug. Dust build up around the prongs can  
create the danger of fire.  
Be sure to unplug the AC adapter from the wall outlet before attempting to  
move the unit to another location.  
Be sure to grasp the AC adapter when unplugging it from a wall outlet.  
Pulling on the power cord can damage it, and create the danger of fire and  
electrical shock.  
Keep the power cord away from stoves and other sources of heat. Heat can  
melt the insulation of the power cord and create the danger of fire and  
electrical shock.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Display Screen Precautions  
Caution  
Never apply strong pressure to the LCD screen or subject it to strong impact.  
Doing so can cause the LCD panel glass to crack or break.  
Should the LCD panel glass ever crack or break, never touch the liquid inside  
of the panel. LCD liquid can lead to skin irritation.  
Should LCD panel liquid ever get into your mouth, gargle with water and  
contact your physician immediately.  
Should LCD panel liquid ever get into your eyes or onto your skin, flush the  
exposed area with clean water for at least 15 minutes, and then contact your  
physician.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Precautions  
The CASSIOPEIA is a precision digital instrument. Incorrect operation and rough  
handling can cause data storage problems and other malfunction. Be sure to read the  
following precautions to ensure proper operation.  
Charge the battery pack as soon as possible when its power goes low. Though  
memory data that is already saved is retained in flash memory even when the battery  
pack goes dead, some memory data may be lost if battery pack power drops below a  
certain level before or during automatic backup of data to flash memory.  
The built-in battery pack can lose its ability to recharge if you do not charge it for a  
long time (about one month). Be sure to charge the battery pack periodically.  
Use the CASSIOPEIA under the conditions listed below.  
Temperature: 0°C to 40°C (32°F to 104°F)  
No condensation  
Conditions other than those above can cause malfunction.  
Avoid using the CASSIOPEIA in areas subjected to the following conditions.  
Static electricity  
Extreme heat or cold  
High humidity  
Sudden temperature changes  
Large amounts of dust  
If you drop the CASSIOPEIA and damage it, immediately turn off power and contact  
your original dealer or an authorized CASIO service provider. Never continue using a  
damaged unit.  
Never place heavy objects on top of the CASSIOPEIA.  
Never try to take the CASSIOPEIA apart. Doing so can cause malfunction.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Never insert foreign objects into connectors, slots, or other openings.  
Take care to avoid spilling water or drinks on the CASSIOPEIA.  
Use only the stylus that comes with the CASSIOPEIA to press the [RESET] button.  
Never use a pen, pencil, or other sharp writing implement. Doing so can scratch the  
touch screen and cause malfunction.  
Never use thinner, benzene, cosmetics, or other volatile agents to clean the exterior of  
the CASSIOPEIA. Use only a dry soft cloth or a soft cloth moistened with a weak  
solution of water and mild neutral detergent.  
Be sure to close the cover to protect the display panel of your CASSIOPEIA while  
carrying it.  
Important  
Playing back movies, digital camera images, and audio files consumes large amounts  
of power and may cause the CASSIOPEIA to become warm to the touch.  
This is normal and does not indicate malfunction.  
To avoid certain system problems, the power button is disabled (you cannot use it to  
turn off power) for about three seconds after you turn on power.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Built-in Battery Pack Service Life  
Though the built-in battery pack is rechargeable, it requires periodic replacement after  
it is used for a long time. If the message “Internal Battery Warning  
The internal battery is low. Continued use may result in loss of ability to store  
data. Charge the battery as soon as possible.” appears on the display when you turn  
on power or while you are using the CASSIOPEIA soon after you correctly charge the  
battery, it probably means that the built-in battery pack has reached the end of its  
normal service life.  
Do not remove the built-in battery pack yourself. Take the unit to your original dealer  
or an Authorized CASIO Service Provider to have it replaced. Note that you will be  
charged for battery pack replacement.  
The normal rule of thumb for battery replacement is about once every two years  
(about 500 charges).  
Important  
Never try to replace the battery yourself! Doing so creates the risk of fire, personal  
injury, or other serious problems.  
Disposing of Your CASSIOPEIA  
Be sure to remove the built-in battery pack from the CASSIOPEIA and dispose of it  
separately.  
Important  
Perform the following steps to remove the built-in battery pack from your  
CASSIOPEIA only if you plan to dispose of your CASSIOPEIA and not use it any  
longer. Otherwise, you should never try to remove the built-in battery pack.  
1. Remove the screws securing the battery pack compartment cover in place, and  
remove the cover.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Disconnect the battery pack connector and remove the battery pack.  
Connector  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Terms and Symbols used in this manual  
The term unitin this manual refers to the CASSIOPEIA.  
The symbol Important indicates important information about a procedure  
that can result in problems if not performed correctly. Be sure to read such  
information carefully.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Ready  
Initial Setup  
After you first unpack your CASSIOPEIA, perform the following initial setup  
procedure before using it for the first time.  
1. Use the AC adapter to charge the battery pack.  
Important  
Make sure you charge the battery pack before using your CASSIOPEIA for the first  
time. The CASSIOPEIA will not work until you charge its battery pack.  
2. While holding down the [Power] button, use the stylus to press the [Reset] button.  
This displays the initialization startup screen. After a short while, the touch screen  
calibration screen appears.  
3. Follow the instructions that appear on the screen to set up your CASSIOPEIA.  
4. The Top Menu appears on the screen after setup is complete.  
You can later change the settings you make with this procedure if you want. See the  
separate CASSIOPEIA User’s Guide for more information.  
See “Where to go for information...” on page 15 of this manual for information about  
where you should go to find out about the features and functions of your  
CASSIOPEIA.  
Be sure to press the [Power] button to turn off power after you are finished using  
your CASSIOPEIA.  
Important  
If the touch panel does not respond when you tap it or if nothing appears on the  
display, try performing a reset (page 34).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Where to go for information...  
Your CASSIOPEIA comes with two manuals: this Hardware Manual and a separate  
CASSIOPEIA Users Guide. Be sure to read the contents of this Hardware Manual first.  
What should I do after reading this Hardware Manual?  
Read the CASSIOPEIA Users Guide next to find out about the powerful software  
features and functions available on the CASSIOPEIA.  
What should I do if I run into problems?  
Check the troubleshooting guides on page 41 of this Hardware Manual and in the  
CASSIOPEIA Users Guide.  
How can I connect my CASSIOPEIA to a computer?  
See page 22, 23, 24 of this Hardware Manual for details about how to connect and the  
type of computer you can connect to.  
How can I install the software on the CASSIOPEIA Applications CD-ROM?  
See the documentation contained on the CD-ROM.  
Important  
The optionally available modem adapter mentioned in this and the other manuals is  
intended for use in the U.S. and Canada only.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operations  
General Guide  
Charge indicator (Amber)  
Lights amber when the battery pack is charging  
and goes off when full charge is achieved.  
Card slot  
Stylus  
Strap hole  
Touch screen  
Perform operations and input  
data by tapping and writing  
directly on the screen.  
Fixed Icons  
Tap an icon to launch the program  
assigned to it. See the CASSIOPEIA  
Users Guide for details.  
Power button  
Turns power on and off.  
Top Menu button  
Press to display the Top Menu. See the  
CASSIOPEIA Users Guide for details.  
Stereo headphone jack  
For connection of commercially  
available earphone/headphones  
(ø3.5mm).  
OK button  
Same as a computers ENTER key  
ESC button  
Same as a computers ESC key  
Cursor button  
Moves the cursor around the screen.  
AC adapter terminal  
Reset button  
Serial connector  
For connection of the cradle or the  
CASSIOPEIA USB cable.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Stylus  
Data input and virtually all other operations are performed using a stylus, which is  
housed inside the stylus holder in the higher right corner of the CASSIOPEIA.  
The following defines the various operations that you can perform with the stylus.  
Tap ...................... Touch the screen once with the stylus to select a screen item.  
Drag .................... Hold the stylus on the screen and drag across the screen to select text  
and images. Drag in a list to select multiple items.  
Double-tap .......... Tap the touch screen twice to open an item.  
Important  
Take care that you do not misplace or otherwise lose the stylus by always storing it in  
the stylus holder when you are not using it.  
Take care to avoid breaking the tip of the stylus.  
Use only the stylus that comes with the CASSIOPEIA, or some other stylus type  
instrument with a soft, blunt point to perform screen operations. Never use a pen,  
pencil, or other sharp writing implement.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Removing the cover  
Gently pull outwards on either of the cover hinges indicated by the arrows in the  
illustration until the hinge is free, and then remove the cover. Make sure you do not  
apply excessive force when removing the cover.  
Recalibrating the Touch Screen  
You should recalibrate the touch screen whenever touch screen response is bad, or  
when the operation performed is different from the operation you expected when  
tapping on the touch screen.  
To recalibrate the touch screen, press the [OK] button while holding down the [Power]  
button. Next, follow the instructions that appear on the screen.  
Adjusting Display Contrast  
Perform either of the following operations to adjust display contrast and make figures  
on the display darker or lighter.  
Press the [Top Menu] button to display the Top Menu, and then tap Settings -  
Brightness. Follow the instructions on your screen for adjusting the contrast.  
You can also adjust contrast as follows.  
To do this:  
Do this:  
Make contrast darker  
Hold down the [Power] button as you press the up  
[Cursor] button  
Make contrast lighter  
Hold down the [Power] button as you press the down  
[Cursor] button  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting Display Brightness  
Use the following operations to adjust display brightness to make it easier to read.  
1. Press the [Top Menu] button to display the Top Menu, and then tap Settings -  
Brightness.  
2. On the dialog box that appears, tap the Brightness tab.  
3. Follow the instructions that appear on the screen for adjusting the brightness.  
You can also adjust brightness as follows.  
To do this:  
Do this:  
Make the screen brighter  
Hold down the [Power] button as you press the right  
[Cursor] button  
Make the screen dimmer  
Hold down the [Power] button as you press the left  
[Cursor] button  
Adjusting Auto Dimming Settings  
1. Press the [Top Menu] button to display the Top Menu, and then tap Settings -  
Brightness.  
2. On the dialog box that appears, tap the Auto Dim tab.  
3. Follow the instructions that appear on the screen to make auto dimming settings.  
You can make separate auto dimming settings for internal power (battery power) and  
external power (AC adapter and optional large-capacity External Power Pack) by  
checking the appropriate check box.  
Using the Cradle  
The cradle provides quick and easy connection between your CASSIOPEIA and a  
computer. Your CASSIOPEIA can also be powered from an AC power source when it  
is placed on the cradle.  
The battery pack charges while the CASSIOPEIA is on the cradle. See page 32 for  
more information.  
Important  
Before connecting your CASSIOPEIA to a computer, make sure you first install  
the PC Connect software on your computer.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing the Cradle Configuration  
The cradle has a back board which you can set to any one of the three positions shown  
in the illustration below. Use the position that suits the configuration of the  
CASSIOPEIA unit you are setting on the cradle.  
+
CASSIOPEIA PC Card Unit  
+
CASSIOPEIA External Power Pack  
CASSIOPEIA Only  
Important  
Make sure that CASSIOPEIA power is turned off before you place it onto or remove it  
from the cradle.  
Use the following procedure to place the unit onto the cradle.  
1. Place the cradle on a desk or other flat level surface.  
2. Turn off the CASSIOPEIA.  
3. Remove the CASSIOPEIAs serial connector cover to open it.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Orient the CASSIOPEIA in relation to the cradle as shown in the illustration below.  
5. Taking care to align the serial connector on the bottom of the CASSIOPEIA with the  
connector on the cradle, lower the CASSIOPEIA into the cradle as shown in the  
illustration below.  
Important  
Make sure the CASSIOPEIA lowers securely into the cradle as far as it can go.  
While the CASSIOPEIA is on the cradle, take care to keep its serial connector cover  
in a safe place. Also, make sure you replace the serial connector cover when you  
remove the CASSIOPEIA from the cradle.  
To remove the CASSIOPEIA from the cradle  
Lift the CASSIOPEIA straight up from the cradle.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Cradle to a Computer  
The cradle has a USB cable for connection to a computer. Connect the end of the cable  
to a USB port of the computer to which you want to connect.  
Important  
See Required System Configurationon page 24 for details on the type of computer  
system required for use with the cradle.  
USB port  
The above illustration is one example of possible connection configurations. The  
locations and layouts of USB ports vary from computer to computer. See the  
documentation that comes with your computer for full details on connecting cables to  
it.  
Note that after connecting the cradle to your computer, you also need to make certain  
PC Connect software settings on your computer to enable data transfers. See the  
Quick Start Guide for information about how to install PC Connect, and PC Connect  
online help for information about how to use it.  
Using the CASSIOPEIA USB Cable  
You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a  
computer.  
Important  
See Required System Configurationon page 24 for the computer system that is  
required for direct USB connection.  
The illustration below is just one possible connection configuration. The location and  
layout of USB ports vary from computer to computer. See the documentation that  
comes with your computer for full details on connecting cables to it.  
You must have PC Connect software installed on your computer in order to exchange  
data with the CASSIOPEIA over a USB connection. See the Quick Start Guide for  
information about how to install PC Connect, and PC Connect online help for  
information about how to use it.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To connect to a computer using the CASSIOPEIA USB cable  
Important  
Before connecting your CASSIOPEIA to a computer, make sure you first install  
the PC Connect software on your computer. Use the steps below to connect the  
CASSIOPEIA to your computer when prompted to do so during the software  
installation procedure.  
1. Plug the USB cable into the USB port of your computer.  
2. Turn off your CASSIOPEIA.  
3. Connect the other end of the USB cable to your CASSIOPEIA.  
USB port  
CASSIOPEIA USB cable  
Using the CASSIOPEIA Serial Cable  
You can use the CASSIOPEIA serial cable to connect the CASSIOPEIA directly to a  
computer.  
Important  
Be sure to turn off the CASSIOPEIA and your computer before connecting the  
CASSIOPEIA.  
See Required System Configurationon page 24 for the computer system that is  
required for direct serial connection.  
The illustration below is just one possible connection configuration. The location and  
layout of serial ports vary from computer to computer. See the documentation that  
comes with your computer for full details on connecting cables to it.  
You must have PC Connect software installed on your computer in order to exchange  
data with the CASSIOPEIA over a serial connection. See the Quick Start Guide for  
information about how to install PC Connect, and PC Connect online help for  
information about how to use it.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To connect to a computer using the CASSIOPEIA serial cable  
Important  
Before connecting your CASSIOPEIA to a computer, make sure you first install  
the PC Connect software on your computer. Use the steps below to connect the  
CASSIOPEIA to your computer when prompted to do so during the software  
installation procedure.  
1. Plug the serial cable into the serial port of your computer.  
2. Turn off your CASSIOPEIA.  
3. Connect the other end of the serial cable to your CASSIOPEIA.  
Serial port  
CASSIOPEIA Serial cable  
Required System Configuration  
The minimum system configuration required for running PC Connect software is  
described below.  
Minimum System Requirements for PC Connect  
Microsoft® Windows® 2000 Professional Service Pack 2, Microsoft Windows NT®  
Workstation 4.0 with Service Pack 6a, Microsoft Windows Millennium Edition  
(Windows Me), Microsoft Windows 98, Microsoft Windows 95 OSR2. (U.S. version)  
Desktop computer with a Pentium® processor for Windows NT (166 MHz required  
for Windows 2000)  
Desktop computer with a Pentium processor for Windows Me (150 MHz required for  
Windows Me)  
Desktop computer with a 486/66 DX or higher processor (Pentium P90  
recommended) for Windows 95/98  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16 MB of memory for Windows 95/98 (more memory will give improved  
performance) or Windows NT Workstation 4.0 (32 MB recommended for Windows  
NT, 64 MB recommended for Windows 2000), 32 MB of memory for Windows Me  
Hard disk drive with 30 MB of available hard disk space (actual requirements will  
vary based on selection of features and users current system configuration)  
USB port (available for Windows 98, Windows Me or Windows 2000 only),  
Available 9 pin communications port with baud rate 115200bps (optional cable  
required). Proper operation may not be possible with certain hardware configurations.  
CD-ROM drive  
VGA graphics card or compatible video graphics adapter with 256 color or higher  
Keyboard  
Microsoft Mouse or compatible pointing device  
Note  
CASSIOPEIA Calendar, Contacts, Tasks, and Mail data can be synchronized with  
Microsoft Outlook® 97/98/2000. However, note that the minimum system  
requirements to run Microsoft Outlook® 97/98/2000 differ from those noted above.  
Different minimum system requirements are required when using the applications  
included on the CASSIOPEIA CD-ROM. See the documentation contained on the  
CD-ROM for full details.  
Certain computer hardware and/or software configurations may not allow PC  
Connect to run properly.  
Important  
When installing PC Connect software on a computer, check to make sure that the  
specified COM port number correctly indicates the serial port to which the cradle is  
connected.  
Some laptop and sub-compact computers with built-in infrared ports and modems are  
initially configured so the COM port is not always used as a serial port. In such a  
case, you must change the setting so the COM port is always used as a serial port.  
See the documentation that comes with your computer for full details on COM port  
numbers and settings.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the AC Adapter  
You can use the AC adapter to directly power the CASSIOPEIA or to supply power  
through the cradle. The battery pack charges while the CASSIOPEIA is directly  
connected to a power source by the AC adapter or while it is on the cradle. See page 32  
for more information.  
I Direct Connection  
I Cradle Connection  
Warning  
Use only the AC adapter that is specified for this unit. Use of another type of AC  
adapter creates the danger of malfunction and bursting of the battery pack.  
Important  
Power also will not turn on if the battery pack is dead.  
Long term use of the AC adapter can cause it to become warm to the touch. This is  
normal and does not indicate malfunction.  
Be sure to unplug the AC adapter from the power outlet whenever you are not using it.  
The AC adapter is designed for indoor use only. Do not use it outdoors.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using a CompactFlash Card  
Your CASSIOPEIA supports Type I and Type II CompactFlash Cards (3.3V).  
The following describes the types of CompactFlash card you can use with your  
CASSIOPEIA.  
Storage Card  
A storage card functions the same as the CASSIOPEIAs data storage memory. You can  
use a storage card to store the various files created by your CASSIOPEIA, and you can  
even install programs on a storage card. Data you store on a storage card is retained  
even when you remove the card from your CASSIOPEIA, which means a card can be  
used to port data between your CASSIOPEIA and computer or other device, or to keep  
backup copies of important data.  
Digital Camera Card  
The CASIO Digital Camera Card (JK-710DC) in combination with the Photo Viewer  
application on the CASSIOPEIA CD-ROM provides you with still image recording  
capabilities. See the CASSIOPEIA Users Guide for more information about using  
Photo Viewer.  
Modem Card  
A modem card lets you connect to a telephone line (standard household modular jack,  
public telephone with modular jack, etc.) for modem data communications.  
Wireless Modem Card  
With a wireless modem card, you can perform mobile data communication without a  
wire connection to a telephone circuit.  
Important  
Gently but firmly slide the card into place as far as it will go, but do not force it.  
Forcing a card can damage connectors. If you have problems inserting a card, pull it  
out and check to make sure it is oriented correctly.  
We strongly recommend that you store all unsaved data you are inputting or editing  
before performing this procedure.  
Sometimes, your CASSIOPEIA may not be able to detect a CompactFlash card. This  
is indicated when a program on the card does not start up normally. When this  
happens, remove the card, reinsert it, and then press the CASSIOPEIA [Reset]  
button.  
Your CASSIOPEIA supports 3.3V CompactFlash cards only. 5.0V cards are not  
supported.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important  
Your CASSIOPEIA comes with a dummy card installed in its card slot. Be sure to  
remove the dummy card before trying to insert another card.  
An empty card slot creates the risk of damage to the slot when pressure is applied to  
the CASSIOPEIA. Always insert the dummy card when you are using the  
CASSIOPEIA without a card.  
To install a CompactFlash card  
1. Make sure your CASSIOPEIA is turned off.  
Press the [Power] button to turn off power.  
2. If there is a dummy card or another CF card in the slot, remove it.  
3. Slide the card you want to use into the card slot.  
Make sure the top of the card is facing towards the top of the CASSIOPEIA unit. A  
card that is not oriented correctly will not slide all the way into the slot.  
Top  
Bottom  
Carefully slide the card into the slot as far as it will go.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using a PC Card Unit  
Connecting your CASSIOPEIA to an optional PC Card Unit (JK-865PU) makes it  
possible for you to use PCMCIA card type PC cards with your CASSIOPEIA.  
Important  
The PC Card Unit has a built-in lithium battery that provides power to the PC card. It  
comes with an AC adapter that can be used to charge its built-in battery or to connect  
to a wall outlet for power supply. See the user documentation that comes with the PC  
Card Unit for details about the built-in battery and the AC adapter.  
To connect your CASSIOPEIA to the PC Card Unit  
1. Make sure your CASSIOPEIA is turned off.  
Press the [Power] button to turn off power.  
2. If there is already a card in the slot, remove it.  
3. Slide your CASSIOPEIA onto the PC Card Unit as shown in the illustration below.  
Make sure the CompactFlash card connector of the PC Card Unit slides into the  
CASSIOPEIA card slot as far as it will go. This causes the CASSIOPEIA to lock in  
place on the PC Card Unit.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To remove the CASSIOPEIA from the PC Card Unit  
1. Make sure your CASSIOPEIA is turned off.  
Press the [Power] button to turn off power.  
2. Pulling on your CASSIOPEIA in the direction indicated by the arrow in the  
illustration, remove it from the PC Card Unit.  
About Modem Adapter (U.S. and Canada Only)  
Use of a modem adapter lets you use your CASSIOPEIA to access the Internet over an  
analog dial-up connection. See the documentation that comes with the modem card for  
information about how to use it.  
Important  
Check to make sure that the battery pack is charged before using the modem adapter.  
Low battery power can cause sudden interruption of communications, unstable  
communications, and loss of data.  
Software Applications  
Your CASSIOPEIA comes with a CASSIOPEIA CD-ROM that contains a number of  
useful applications. Note that you must install the applications you need from the CD-  
ROM before you can use them. See the CASSIOPEIA Users Guide for details on using  
the software applications.  
Important  
Whenever purchasing software applications, always double-check to make sure that it  
is compatible with the CASSIOPEIA BE-300.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
User Maintenance  
About the CASSIOPEIA’s built-in rechargeable battery  
Note the following precautions concerning the CASSIOPEIA’s rechargeable battery.  
We recommend that you use the Power dialog box to keep informed about the current  
levels of your battery. See the separate CASSIOPEIA User’s Guide for more  
information about this dialog box.  
Icons appear along the bottom of the screen to let you know when battery power is  
low. See the separate CASSIOPEIA User’s Guide for more information about these  
icons.  
Low Battery Warning and Data Storage  
The following message appears whenever battery power drops below a certain level.  
Recharge the battery as soon as possible after the following message appears.  
“Internal Battery Warning  
The internal battery is low. Continued use may result in loss of ability to store  
data. Charge the battery as soon as possible.”  
Whenever the low battery warning message appears, especially if it appears right  
after you turn on power, follow the instructions that appear on the screen and  
recharge the battery as soon as possible. Continued use under low battery power can  
cause unstable performance of your CASSIOPEIA.  
If unit power turns off due to insufficient power, the following warning message  
appears on the display the next time you turn on unit power.  
“Warning  
The system has shut down without warning to protect memory contents, due to  
high electrical current consumption by hardware...”  
If unit power turns off due to sudden power drain by a CompactFlash card, the  
following warning message appears on the display the next time you turn on unit  
power.  
“Warning  
The system has shut down without waring to protect memory contents, due to  
high electrical current consumption by the card...”  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important  
Be sure to observe the following important battery handling precautions. Failure to do  
so can cause batteries to leak, resulting in damage to surrounding items and create the  
danger of fire and electrical shock.  
Charge the battery pack in an area where the temperature is between 10°C (50°F)  
and 35°C (95°F). Charging in areas that are very cold or exposed to direct sunlight  
can cause deterioration and leaking of the battery pack.  
To avoid deterioration and leaking, the battery pack is designed to discharge even  
when you do not use the CASSIOPEIA. Be sure to recharge the battery pack at least  
once a month, regardless of how much you use the CASSIOPEIA during that time.  
Charging the Battery Pack  
Attach the AC adapter to the cradle and place the CASSIOPEIA onto the cradle.  
Charging starts automatically as soon as you place the CASSIOPEIA onto the cradle.  
The charge indicator is amber while charging is in progress, and goes off when  
charging is complete.  
It takes about three or four hours to reach full charge.  
You can use your CASSIOPEIA while the battery pack is charging.  
Important  
Do not use the CASSIOPEIA while it is charging for the first time after you purchase  
it.  
If the battery does not achieve full charge after the normal charge time, unplug the  
AC adapter from the cradle to stop charging.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remove the CASSIOPEIA from the cradle after charging is complete.  
The following illustration shows how to connect the AC adapter directly to the  
CASSIOPEIA for charging.  
Charging starts automatically as soon as you attach the AC adapter to the CASSIOPEIA.  
Direct connection charging conditions are the same as those described for cradle  
charging above.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Resetting the CASSIOPEIA and Restoring Data  
What does resetting the CASSIOPEIA do?  
Resetting your CASSIOPEIA is the same as restarting your computer. Performing a  
reset causes any data you are working on but have not saved yet to be lost, but data  
saved in memory and other settings are basically left unchanged.  
You should perform the reset operation whenever your CASSIOPEIA behaves  
abnormally due to operational error or some other problem. The reset operation is  
required in the following cases.  
When there is no response when you tap the screen or press a button  
When the icon that indicates some operation is in progress continues to rotate on the  
screen for a long time  
Important  
Check to make sure the  
button.  
icon is not in the system tray before you press the reset  
Performing the reset operation causes all user files and folders that are not contained  
in the My Device\Nand Disk folder to be deleted. To keep a file or folder from being  
deleted by the reset operation, store it in the My Device\Nand Disk folder or on a  
storage card.  
Though saved data is normally not lost when you perform a reset operation, abnormal  
data in memory can cause all saved data to be cleared. Because of this, you should  
always back up data to a storage card whenever possible before performing a reset  
operation.  
To reset your CASSIOPEIA  
1. Turn on your CASSIOPEIA.  
2. Use the stylus to press the [Reset] button.  
3. The message Starting...appears on the display to let you know that the reset  
operation is starting.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Top Menu should appear on the display after a short while. Since this procedure  
does not affect data and settings stored in memory, you can now continue using the  
CASSIOPEIA.  
What to do if resetting does not solve the problem  
Perform the following steps if resetting the CASSIOPEIA does not restore normal  
operation.  
1. While holding down the [Power] button, use the stylus to press the [Reset] button.  
This displays the initialization startup screen.  
2. The message Starting...appears on the display to let you know that the reset  
operation is starting.  
The Top Menu should appear on the display after a short while. Since this procedure  
does not affect data and settings stored in memory, you can now continue using the  
CASSIOPEIA.  
Important  
If you continue to have problems after performing the above steps, you need to  
perform the procedure under Restoring Data.  
Restoring Data  
If your CASSIOPEIA does not operate normally and the reset procedures under To  
reset your CASSIOPEIAon page 34 and What to do if resetting does not solve the  
problemon page 35 do not correct the problem, you should be able to restore normal  
operation using any one of the following procedures.  
Use PC Connect to restore CASSIOPEIA data you have backed up on your computer.  
Use data you backed up to a memory card to restore CASSIOPEIA data.  
Use the bundled CD-ROM to restore the CASSIOPEIA to its initial factory defaults  
(page 39).  
Important  
All of the above methods cause data currently stored in CASSIOPEIA memory to be  
deleted.  
If normal operation is not restored after you perform any of the above procedures,  
contact your original dealer or an authorized CASIO service provider.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To restore data backed up to a computer  
1. Connect the AC adapter to the CASSIOPEIA.  
2. Press the [Power] button.  
3. While holding down the [OK] button, use the stylus to press the [Reset] button.  
This enters the Safe Mode.  
4. Tap the [OK] button.  
This displays the touch screen calibration screen. Follow the instructions on the  
display to calibrate the touch screen.  
The following screen appears after you finish touch screen calibration.  
5. Start up your computer (which should have PC Connect installed on it), start up PC  
Connect, and establish a connection between the computer and your CASSIOPEIA.  
6. Tap [PC Connection].  
This establishes a connection between your CASSIOPEIA and computer. In response  
to the dialog box that appears to ask if you want to start up by restoring backup data,  
tap [OK].  
The following steps are performed in PC Connect on your computer.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 On the PC Connect initial screen, select [Restore] on the [Tool] menu.  
This displays the [Restore] dialog box.  
8. Select the back up file you want to restore, and then click [OK].  
This starts restoration, which is indicated by messages on the screens of your  
computer.  
After restoration is complete, a message appears on your computer screen asking if  
you want to restart your CASSIOPEIA.  
9. Click [OK].  
This restarts your CASSIOPEIA.  
10.On your CASSIOPEIA, perform the steps under What to do if resetting does not  
solve the problemon page 35.  
MEMO  
Pressing [ESC] in step 4 exits the above procedure and starts the normal reset  
procedure under To reset your CASSIOPEIAon page 34.  
Press the [Power] button in step 4 of the above procedure turns off the CASSIOPEIA.  
You can then turn power back on and perform a normal reset.  
If you do not do anything when the confirmation message appears in step 4 of the  
above procedure, your CASSIOPEIA will turn off automatically after about 30  
seconds. You can then turn power back on and perform a normal reset.  
To restore data backed up to a storage card  
1. Connect the AC adapter to the CASSIOPEIA.  
2. Press the [Power] button.  
3. While holding down the [OK] button, use the stylus to press the [Reset] button.  
This enters the Safe Mode.  
4. Tap the [OK] button.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
This displays the touch screen calibration screen. Follow the instructions on the  
display to calibrate the touch screen.  
The following screen appears after you finish touch screen calibration.  
5. Insert the storage card that contains the backed up data into the CASSIOPEIAs card slot.  
6. Tap [Storage Card].  
This starts the backup operation.  
7. Tap [Restore].  
This displays the dialog box shown below.  
If you protected data with a password when backing it up, input the password here.  
If you did not protect the data with a password, perform the following step without  
inputting anything.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Tap [Yes] to start the restore operation.  
9. In response to the Restore completemessage that appears after restoration is  
complete, tap [OK].  
This automatically resets the CASSIOPEIA, so wait a few moments until it starts up.  
Restoring Factory Defaults  
You can use the procedure below to restore the CASSIOPEIA to its factory defaults in  
the following cases.  
When the procedures under To reset your CASSIOPEIAon page 34 and What to do  
if resetting does not solve the problemon page 35 do not restore normal operation  
When you forget your CASSIOPEIAs password.  
When you want to clear all CASSIOPEIA data and settings before selling it or  
transferring it to another person  
To restore your CASSIOPEIA to its factory defaults  
1. Connect the AC adapter to the CASSIOPEIA.  
2. Press the [Power] button.  
3. While holding down the [OK] button, use the stylus to press the [Reset] button.  
This enters the Safe Mode.  
4. Tap the [OK] button.  
This displays the touch screen calibration screen. Follow the instructions on the  
display to calibrate the touch screen.  
The following screen appears after you finish touch screen calibration.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Start up your computer (which should have PC Connect installed on it), start up PC  
Connect, and establish a connection between the computer and your CASSIOPEIA.  
6. Tap [PC Connection].  
This establishes a connection between your CASSIOPEIA and computer. In response  
to the dialog box that appears to ask if you want to start up by restoring backup data,  
tap [OK].  
The following steps are performed in PC Connect on your computer.  
7. Place the CD-ROM that came bundled with your CASSIOPEIA into your computers  
CD-ROM drive.  
8. On the PC Connect initial screen, select [Restore] on the [Tool] menu.  
This displays the [Restore] dialog box.  
9. Select the [Restore factory defaults], and then click [OK].  
This starts restoration, which is indicated by messages on the screens of your  
CASSIOPEIA and computer.  
After restoration is complete, a message appears on your computer screen asking if  
you want to restart your CASSIOPEIA.  
10.Click [OK].  
This restarts your CASSIOPEIA.  
On your CASSIOPEIA, perform the steps under What to do if resetting does not  
solve the problemon page 35.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Before assuming malfunction and contacting your service provider when experiencing  
operational problems, be sure to check the following information as well as the  
troubleshooting section of the CASSIOPEIA User’s Guide first.  
Nothing happens when the [Power] button is pressed.  
Possible Cause  
The battery is weak.  
Recommended Action  
Charge the battery pack.  
Page  
32  
Internal malfunction  
Reset the unit.  
34  
Operation is disabled when the AC adapter is connected.  
Possible Cause Recommended Action  
Charge the battery pack.  
Page  
32  
The battery is weak.  
20  
The unit is not mounted on the cradle  
correctly.  
Mount the unit on the cradle correctly.  
The battery pack life is very short after each charge.  
Page  
Possible Cause  
Recommended Action  
Battery pack is damaged or has reached Contact your original dealer or an  
the end of its service life.  
authorized CASIO service provider.  
Nothing happens when the touch screen is touched.  
Possible Cause  
The touch screen is out of calibration.  
Recommended Action  
Page  
Recalibrate the touch screen.  
18  
Static electricity or some other problem Reset the unit.  
has caused the touch screen to  
malfunction.  
34  
The touch screen is damaged.  
Contact your original dealer or an  
authorized CASIO service provider.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The screen is locked up.  
Recommended Action  
Reset the unit.  
Possible Cause  
Page  
Internal malfunction  
34  
A message about a data error is on the screen.  
Possible Cause  
Recommended Action  
Page  
Internal malfunction  
Follow the instructions that appear on  
the screen.  
Some other warning message is on the screen.  
Possible Cause  
Recommended Action  
Page  
Internal malfunction  
Follow the instructions that appear on  
the screen.  
If the reset operation does not restore normal operation, perform the steps  
under What to do if resetting does not solve the problemon page 35.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Button Operations  
The following shows the function of each button under various conditions.  
Unit Power Off  
[Power] Button ........................... Turns on power.  
Unit Power On  
[Power] Button + [OK] Button ............................ Launches the touch screen  
calibration procedure.  
[Power] Button + Cursor up ................................ Makes contrast darker.  
[Power] Button + Cursor down ........................... Makes contrast lighter.  
[Power] Button + Cursor right ............................. Increases brightness.  
[Power] Button + Cursor left ............................... Decreases brightness.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
Model:  
BE-300  
Display:  
240 × 320 dots  
STN Color LCD (32,768 colors)  
VR4131  
CPU:  
Memory:  
ROM 16MB Flash ROM  
RAM 16MB  
Interfaces:  
Serial: RS-232C, 115.2 kbps max.  
USB (Client)  
Card Slot:  
CompactFlash card, 3.3V Type I/TypeII  
Headphone jack: ø 3.5 mm stereo output  
Accepts monaural earphone, stereo earphones/headphones  
Power Supply  
Rechargeable battery (Lithium-Ion battery)  
AC adapter (AD-C59200)  
Power Consumption: 3.0W  
Approximate Battery Life (Normal Temperature)  
(Actual time may be shorter due to conditions when charging.)  
1 week: Based on normal use  
4 hours: Continuous input and data display at a ratio of 1:10, with  
screen brightness at lowest possible level.  
Even when the unit is turned off, small amounts of power are  
required to retain memory contents, etc. This can cause batteries to  
go dead even when you do not use the unit.  
The actual amount of operation time that can be expected from  
batteries depends on operating conditions, settings, and other  
variables.  
Approximate Charge Time (Normal Temperature)  
3 to 4 hours: Charge time is longer for the first charges after  
purchasing the unit or installing a new battery pack.  
Operating Temperature: 0°C to 40°C (32°F to 104°F)  
Charging Temperature: 10°C to 35°C (50°F to 95°F)  
Dimensions: 17.9 H × 76.0 W × 121.0 D mm (3/4"H × 3"W × 4 3/4"D) (Excluding cover  
and projections.)  
Weight: Approximately 170 g (6.0 oz) (Including cover.)  
Approximately 158 g (5.6 oz) (Excluding cover.)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Regulatory Information  
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not  
applicable to other areas).  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference  
by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC WARNING  
Changes or modifications not expressly approved by the party responsible for compliance could void the  
user's authority to operate the equipment.  
Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC  
emission limits.  
Connector ...................... BE-300 unit to Cradle  
Connector cable ............. BE-300 unit to computer  
Declaration of Conformity  
Model Number:  
Trade Name:  
BE-300  
CASIO COMPUTER CO., LTD.  
Responsible party: CASIO, INC.  
Address:  
570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801  
Telephone number: 973-361-5400  
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CASIO ELECTRONICS CO., LTD.  
Unit 6, 1000 North Circular Road  
London NW2 7JD, U.K.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASIO COMPUTER CO., LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
PN411573-001  
MO0108-A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Beko Washer 914834 User Manual
Black Decker Blender BL2020R User Manual
Blomberg Refrigerator BRFB1050FFBI User Manual
Bogen Speaker ASUG1DK User Manual
Bolens Lawn Mower 111 330A User Manual
Braun Mobility Aid RA200 User Manual
Carrier Air Conditioner DPE012 User Manual
Casio Watch 2182 User Manual
CFM Corporation Ventilation Hood PVS 1 User Manual
Cisco Systems IP Phone OL 14587 01 User Manual