Canon All in One Printer 4350B001 User Manual
Please read me first [Important]  
About the SELPHY CP800 Printer User Guide  
Due to different firmware versions, there are two types (two versions) of the user guide  
for the SELPHY CP800. Please check the serial number on the bottom of the printer  
and click the right version for your printer.  
1. How to tell which version you need based on the serial number  
Sixth digit from the right  
Bottom of printer  
1) The sixth digit from the right is 0 or 1  
First version  
2) The sixth digit from the right is ater
Second version  
There are also cases where the prinwarmay have been updated to the second  
version if the printer has ben brougrepairs. In such cases, a comment about  
the update to the second vesion of the firmware appears on the repair order, and the  
user guide for the second vers(or an excerpt of the things that have changed) is  
included with the repaired product.  
2. The differences in the firmware versions  
1) First version:  
The settings for the printing layout (for printing multiple images on a single sheet, see  
page 19 in the user guide) are saved even when the printer's power is turned off. This  
can be convenient you intend to print with the same layout the next time the printer is  
used, but if that is not the case, it can result in prints in an unexpected layout.  
2) Second version:  
The settings for the printing layout are reset to the 1-up setting (for printing one image  
on a full sheet) when the printer's power is turned off. To save the settings for the  
printing layout even after the printer's power has been turned off, you can change the  
settings to be the same as they are in the first version using the operation buttons (see  
page 19 of the user guide for the second version of the firmware).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printer User Guide  
ENGLISH  
Make sure you read this guide, including the “Safety  
Precautions” section, before using the printer.  
Store this guide safely so that you can use it in the future.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
Check if the following items are included in your printer package, using the □ check boxes.  
If anything is missing, contact the retailer where you purchased the printer.  
□ SELPHY Printer Unit  
□ Compact Power Adapter  
□ Power Cord  
CA-CP200 W  
□ Paper Cassette (Postcard Size)  
□ Paper Cassette (Card Size)*  
□ CD-ROM:  
PCP-CP300  
PCC-CP300  
COMPACT PHOTO  
PRINTER Solution Disk  
□
Printer User Guide (This Guide)  
□
Support Guide  
□ Warranty Card  
* Card size paper cassette may not be included deg on e region.  
Ink and Paper (Sold Sarately)  
Before using the printer, be sure to purchaColor Ink Cassette/Paper Set separately.  
Color Ink Cassette/Paper Set  
Necessary Paper Cassette  
Number of  
Possible Prints  
Product Name  
Paper Size  
Color Ink Cassette/Paper Set KP-36IP  
(Postcard)  
36  
72  
Color Ink Cassette/Paper Set KP-72IN  
(Photo Paper)  
Paper Cassette PCP-CP300  
(Included with SELPHY)  
Postcard Size  
Color Ink Cassette/Paper Set KP-108IN  
(Photo Paper)  
108  
36  
Color Ink Cassette/Paper Set KC-36IP  
Color Ink Cassette/Label Set KC-18IF  
(Full-page labels)  
18  
Card Size  
Paper Cassette PCC-CP300  
Color Ink Cassette/Label Set KC-18IL  
(8-label sheets)  
18  
Some accessories may not be available depending on the region.  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read This First  
Warning Against Copyright Infringement  
The images printed with this product should be intended for personal use. Do not print images that  
infringe upon copyright laws without the prior permission of the copyright holder.  
Warranty Limitations  
This product’s warranty is only effective in the country of sale. If there is a problem with the printer  
while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon  
Customer Support Help Desk.  
LCD Monitor (Screen)  
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than  
99.99% of the pixels operate to specification. However, some pixels may occasionally misfire or  
appear as red or black dots. This has no effect on the printed image and does not constitute a  
malfunction.  
The LCD monitor may be covered with a thin plastic film for protection against scratches during  
shipment. If so, remove the film before using the printer.  
Conventions Used in this Guide  
This printer will be referred to as “SELPHY” or “printer”.  
The various types of memory cards that can be used in this ptare collectively referred to as “memory  
cards”.  
Icons are used in the text to represent SELPHY’s buttor detai, refer to “Controls”  
(p. 6).  
Language that displays on the screen appea[ ] (uare brackets).  
: Things you should be careful aout  
: Supplemental information  
(p. XX) : Reference pages (“XX” stans for page number)  
This guide assumes all functions are at their default settings.  
Table of Contents  
Package Contents ________________________ 2  
Ink and Paper (Sold Separately) _____________ 2  
Read This First __________________________ 3  
Conventions Used in this Guide _____________ 3  
Safety Precautions _______________________ 4  
Setting Up SELPHY_______________________ 5  
Components Guide _______________________ 6  
Information Displayed on the Screen _________ 7  
Getting Started __________________________ 8  
Setting the Display Language _______________11  
Compatible Memory Cards and  
Storing the Printed Photos _________________16  
Cleaning Up After Printing __________________16  
Printing a Variety of Images_________________17  
Printing From Your Computer ______________ 22  
Installing and Starting the Software__________ 23  
Using the Software to Print ________________ 25  
Printing From Your Digital Camera __________ 27  
Printing Images Using Digital Camera Specified  
Settings (DPOF Print) ____________________ 28  
Using the Battery Pack ___________________ 29  
Printing From Your Mobile Phone ___________ 30  
Troubleshooting__________________________31  
Specifications __________________________ 33  
Handling Precautions ____________________ 34  
Memory Card Slots _______________________12  
Images That Can Be Printed ________________12  
Selecting and Printing Images_______________13  
Printing All Images________________________15  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Before using the product, please ensure that you read the safety precautions described below. Always  
ensure that the product is used correctly.  
The safety precautions noted on the following pages are intended to prevent injuries to yourself and other  
persons, or damage to the equipment.  
Be sure to also check the guides included with any separately sold accessories you use.  
Denotes the possibility of serious injury or death.  
Warning  
Store this equipment out of the reach of children and infants.  
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.  
Use only recommended power sources.  
Do not attempt to disassemble, alter or apply heat to the product.  
Avoid dropping or subjecting the product to severe impacts.  
To avoid the risk of injury, do not touch the interior of the printer if it has been dropped or otherwise  
damaged.  
Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves  
abnormally.  
Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.  
Do not let the product come into contact with water (e.g. sea water) or other liquids.  
Do not allow liquids or foreign objects to enter the printer.  
This could result in electrical shock or fire.  
If liquid comes into contact with the product, unplug it from the oand consult your retailer or a Canon  
Customer Support Help Desk.  
Do not touch this printer or the power plug ring derstorms.  
This could result in electrical shock or fire. Immstop using the equipment and distance yourself from it.  
Unplug the power cord periodicay and wiany dust and dirt that has collected on the plug,  
the exterior of the power outlet, ad the surrding area with a dry cloth.  
Do not handle the power cord with wet hnds.  
Do not use the equipment in a mannehat exceeds the rated capacity of the electrical outlet or  
wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the  
outlet.  
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.  
Do not cut, damage, alter or place heavy items on the power cord.  
This could result in electrical shock or fire.  
Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.  
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible  
to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD  
player.  
Denotes the possibility of injury.  
Caution  
Do not stick any part of your hand into the printer interior.  
Be sure to place SELPHY safely so as to avoid tripping over the power cord.  
This could lead to injury or damage the printer.  
Avoid using, placing or storing the printer in the following places.  
Places subject to strong sunlight. Places subject to temperatures above 40 °C (104 °F).  
Humid or dusty areas. Places subject to strong vibrations.  
These could result in electrical shock, burns, fire or other injuries.  
High temperatures may cause deformation of the adapter or printer casing.  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Denotes the possibility of damage to the equipment.  
Caution  
Unplug the product from the power outlet when you are not using it.  
Do not place anything, such as cloth, on top of the printer while in use.  
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting  
in fire.  
Setting Up SELPHY  
Place SELPHY on a stable and even surface, such as a  
table. Never place it on an unstable or tilted surface.  
Keep SELPHY at least 1 m (3 ft.) from devices emitting  
electromagnetic waves or strong magnetic fields.  
More than the  
length of the  
paper  
Make sure there is at least 10 cm (4 in.) of free space  
around SELPHY.  
Since paper will pass in and out of SELPHY during  
printing, make sure the space behind the printer is greater  
than the length of the paper.  
10 cm (4 in.)  
or more  
10 cm (4 in.)  
or more  
Never place SELPHY close to otors or other devices that generate strong electromagnetic fields.This  
may damage the printer or cause t to mlfunction.  
Do not place near a television or radio. This may cause the printer to malfunction.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Components Guide  
Card Slots (p. 12)  
Paper Cassette  
Ink Cassette Lock (p. 14)  
Compartment (p. 10)  
Ink Cassette Compartment (p. 10)  
Ink Cassette Compartment Cover  
(p. 10)  
Paper Cassette  
Compartment Cover (p. 10)  
USB Terminal for Digital Camera/  
USB Flash Memory Connection  
(pp. 14, 27, 30)  
USB Terminal for Computer  
Connection (p. 24)  
Battery/Battery Cover  
Lock (p. 29)  
Battery Cover (p. 29)  
(Air vents are behind  
the battery cover (p. 34))  
DC IN (Power Input) Terminal  
(p. 10)  
Security Slot*  
Paper Ejection Slot  
*
Security cables, such as a Kensington lock, can be attached to this slot.  
Controls  
    
Icons Used in This  
Name  
Function  
Guide  
—
q
Screen (LCD Monitor)  
Power Button  
Displays images, settings screens, or error messages (p. 32).  
Turns SELPHY on or off (p. 11).  
Menu Button  
Displays the menu screen (p. 11).  
k
o
u
OK Button  
Sets the selected item.  
Up/+ Copies Button  
Specifies number of copies, selects items to set.  
Switches images, changes settings.  
Down/– Copies Button  
d
Left Button  
Right Button  
Back Button  
Print Button  
l
r
Restores the previous screen (p. 7), cancels printing (p. 14).  
Starts printing (p. 14).  
v
p
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information Displayed on the Screen  
Memory card slot (p. 12) currently  
in use (An SD card is used in this  
example)  
Paper orientation  
Print settings (pp. 18 – 21)  
(Settings that are not available are  
grayed out)  
File number  
Installed ink cassette type  
(Postcard size is used in this example)  
Total number of images to be printed  
Number of copies for the displayed image  
Hiding Information Displayed on the Screen  
You can hide the information displayed on the screen and view images at a larger size.  
Display the seings screen.  
1
Follops 1 on p. 11.  
the setting.  
2
Pess the  
Press the  
ud  
l r  
buttons to select [Info Display].  
buttons to select [Off], then press the  
v
button to complete the setting.  
Pressing the  
button again will restore the image  
v
display screen.  
The image will display full screen, and a frame that  
indicates the printing area will appear.  
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Preparations for printing images. A Postcard size Color Ink Cassette/Paper Set (sold separately) (p. 2) will be  
used as an example, however Color Ink Cassette/Paper Sets other than Postcard size may also be used in  
the same way to prepare for printing.  
Preparing the Ink Cassette  
Check the ink cassette.  
Check that the paper size and the size shown on the color  
ink cassette (Card size, Postcard size etc.) match.  
Check that the ink sheet is taut with no slack. If the ink  
sheet is slack, push and turn the sprocket as shown in the  
illustration.  
If you overwind the ink sheet, it may not be possible to  
use all the paper for printing and the ink sheet may tear.  
Ink sheet  
Do not touch or pull on the ink sheet. Do not touch the ink cassette with wet or sweaty hands. You may not  
be able to print if the ink sheet is damaged, dirty or wet.  
Preparing the Paper Cassette  
Check paper size.  
1
2
ck tat the prepared ink cassette and the size shown  
e paper cassette (Card size, Postcard size, etc.)  
h.  
Open the lid.  
There are two steps to open the lid. Open the outer lid (  
)
first, then open the inner lid ( ).  
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the paper.  
3
Set the paper into the paper cassette that you prepared.  
You can place up to 18 sheets in the paper cassette.  
Inserting 19 or more sheets may damage the printer or  
cause malfunction.  
Shiny side  
Hold the paper as shown in the illustration, with the shiny  
side facing up and put it into the paper cassette. Do not  
touch the print side (shiny side) of the paper with your  
fingers. This may prevent you from making clean prints.  
If a protective sheet is included with the paper, remove it  
and set the paper only into the cassette.  
When making Postcard size prints that have a section  
for pasting a stamp, insert the paper so that the stamp  
section is facing the direction shown in the illustration.  
Close the lid.  
4
Close the ier d until it clicks into place.  
Leave outed open during printing.  
Use only dedicated paper for use SEPHY CP series printers included in the genuine Canon brand  
Color Ink Cassette/Paper Sets. Regular printing paper, regular postcards, or dedicated paper for SELPHY  
ES series printers cannot be used.  
Never do the following, as it may result in failure or cause the printer to malfunction:  
- reverse the paper (the shiny side is the print side)  
- bend or separate the paper at the perforations before printing  
- use label sheets that have begun to peel or label sheets with portions peeled back  
- write on a sheet before printing  
- print on already printed paper  
- reuse a spent ink cassette  
Do not touch the springs of the paper cassette.  
If the springs are bent or deformed, paper will not feed correctly into  
SELPHY.  
Do not touch or scratch the print surface (shiny side), or touch the  
paper with wet hands. If the print surface becomes dirty or wet, you  
will not be able to make clean prints.  
Spring  
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Ink and Paper Cassettes  
Open the covers.  
1
2
3
Open the covers for the ink cassette and paper cassette  
compartments.  
Insert the ink cassette.  
Insert the ink cassette into the printer in the direction  
indicated by the arrow on the cassette until it clicks and  
locks into place.  
Close the ink cassette compartment cover.  
Insert the paper cassette.  
Make sure that the outer lid is open (p. 8) and insert the  
paper cassette l the way into the compartment.  
Connecting SELPHY  
Plug the adapter cord into SELPHY.  
1
2
Fully insert the adapter plug into SELPHY.  
Connect the power cord.  
Connect the power cord to the compact power adapter,  
then plug the other end into a power outlet.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Display Language  
You can change the language displayed in the LCD monitor menus and messages.  
Turn on SELPHY.  
1
Press and hold the  
the left displays.  
q
button until the screen shown at  
To turn the power off, press and hold the  
q
button again  
until the displayed screen changes or turns off.  
Adjust the screen for ease of viewing.  
2
3
Raise the LCD monitor and adjust until the screen is  
easily visible.  
Do not raise the LCD monitor more than 45° as this may  
result in damage or malfunction.  
Approx. 45°  
Display the settings screen.  
Press the  
Press the  
pres
k
bon.  
ttons to select [Printer Setup], then  
u
bon.  
o
Display the language settings screen.  
4
5
Press the  
Press the  
ud  
o
buttons to select [Language].  
button.  
Select a language.  
Press the  
udl r  
buttons to select a language, then  
press the  
button.  
o
Pressing the  
v
button twice will restore the screen in  
Step 1.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible Memory Cards and Memory Card Slots  
Memory Cards That Can be  
Used Without an Adapter  
Memory Cards That Require an Adapter  
(commercially available)  
Card Slots  
SD Memory Card  
SDHC Memory Card  
SDXC Memory Card  
miniSD Memory Card  
miniSDHC Memory Card  
microSD Memory Card  
microSDHC Memory Card  
microSDXC Memory Card  
RS-MMC Card *1  
MMCmobile Card  
MMCmicro Card  
MultiMediaCard  
MMCplus Card  
+
SD/MMC  
HC MMCplus Card  
2
CF (CompactFlash) Card  
Microdrive  
xD-Picture Card  
*
CF/microdrive  
Memory Stick  
Mmory Stick micro  
Memory Stick PRO  
Memory Stick Duo  
Memory Stick PRO Duo  
MS/MS Duo  
*1 “RS-MMC” is an abbreviation of “Reducd-ze Card”.  
*2 Purchase the CompactFlash Card Adater for xD-Card.  
For memory cards that require an daer, be sure to first insert the memory card into the adapter before  
inserting into the appropriate card slot.  
If you insert the memory card into a card slot without using an adapter, you may not be able to remove  
the memory card from the printer.  
Use a memory card formatted in the device used for taking the images. A memory card formatted on a  
computer may not be recognized.  
Refer to the user guide included with your memory card and adapter for handling instructions.  
About USB Flash Memory  
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p. 14).  
Images That Can Be Printed  
JPEG images conforming to the Exif standard can be printed with SELPHY.  
Irregularly sized images, or images that have been edited on a computer may not display or print properly.  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting and Printing Images  
You can select an image and specify the number of copies for printing. In this section, an SD memory card  
will be used as an example, but you can print from other memory cards using the same steps.  
Turn on SELPHY.  
1
Press and hold the  
the left displays.  
q
button until the screen shown at  
To turn the power off, press and hold the  
q
button again  
until the displayed screen changes or turns off.  
Adjust the screen for ease of viewing.  
2
3
Raise the LCD monitor and adjust until the screen is  
easily visible.  
Do not raise the LCD monitor more than 45° as this may  
result in damage or malfunction.  
Approx. 45°  
Insert a single memory card into the slot.  
Inseremory ard fully into the appropriate slot.  
The in Ste4 below (image display screen) (p. 7)  
ll diy.  
Label side  
Select an image.  
4
5
Press the  
l r  
buttons to select an image to print.  
If you press and hold one of the  
jumps by 5 images.  
l r  
buttons, the display  
Select the number of copies.  
Press the  
ud  
buttons to select the number of copies.  
If you press and hold one of the  
ud  
increases or decreases by 5 copies.  
You can select up to 99 copies per image.  
To print another image, repeat Steps 4 and 5.  
buttons, the number  
Number of copies  
for the displayed  
image  
Total number  
of images to be  
printed  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Print.  
6
Press the  
p
button to start printing.  
During printing, the paper will pass in and out from the  
back of SELPHY several times. Do not touch the paper  
until printing has finished and the printed sheets collect  
on the print output tray (on the outer lid of the paper  
cassette).  
Do not let 19 or more printed sheets collect on the print  
output tray.  
To cancel printing, press the  
v
button.  
Insert the paper.  
7
8
When the paper is depleted, remove the paper cassette  
from SELPHY.  
Refill the paper cassette with new paper (p. 8), and  
reinsert the cassette into SELPHY (p. 10).  
Change the ink cassette.  
When the color ink is depleted, open the ink cassette  
compartment cover and move the lock as shown in the  
illustration. The ink cassette will be ejected.  
Insert a new ink cassette (pp. 8, 10).  
Never pull out the paper cassette, open the tte cmpartment cover, or remove the memory card  
while you can hear the printer’s oeration somediately after turning on the printer, or during printing.  
This may cause the printer to manction.  
It may take some time before images display if the memory card contains a large number of images.  
When the total number of copies for printing is set to 0 and you press the  
button, the currently  
p
displayed image will print once.  
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified  
Settings (DPOF Print)” (p. 28).  
Printing From USB Flash Memory  
Just like images on memory cards, images on commercially available USB flash memory can also be printed.  
Insert a USB flash memory.  
Insert a USB flash memory as shown.  
All further steps are the same as those used for printing  
images from memory cards (pp. 13 – 14).  
Depending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not  
operate properly.  
Refer to the user guide included with your USB flash memory for operating instructions.  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing All Images  
You can print all images on a memory card at once.  
Display the menu.  
1
2
Press the  
k
button.  
Display the settings screen.  
Press the  
ud  
buttons to select [Print All Images], then  
press the  
button.  
o
Selecnumbr of copies.  
3
4
ss t
ud  
buttons to set the number of copies.  
an elect up to 99 copies per image. If there are  
than 1000 images on the card, only 999 copies will  
be printed in order of the most recent by shooting date.  
Number of sheets  
required  
Number of copies  
Print.  
Press the  
p
button to start printing.  
To cancel printing, press the  
v
button.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing the Printed Photos  
When both edges of a print have perforations, you can remove the edges  
by bending them.  
Use an oil-based pen to write on prints.  
To prevent discoloration, do not store prints in places subject to  
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct  
sunlight.  
Avoid the following actions as they may result in color change, color  
fading or color bleeding: Sticking any type of adhesive tape on a print  
surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile  
solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for  
prolonged periods.  
If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or  
cellophane.  
Color may change over time or depending on storage conditions. Canon assumes no liability for color  
changes.  
Cleaning Up After Printing  
After you finish printing, follow the steps below to clean up and storSELPHY.  
Turn off SELPHY (p. 11), then remove the memory carSB flh memory.  
Lower the screen (LCD monitor) completely for stora
Unplug the power cord from the power outlet iscoct the adapter plug from SELPHY.  
If the compact power adapter is hot, wait unoold down before you store it.  
Remove the paper cassette and closte paette compartment cover. Keep the remaining paper  
inside the cassette and store the casette in a ace free from dust.  
Keep the ink cassette inside SELPH.  
Store SELPHY horizontally, in a dark ace ee from dust.  
When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely  
lowered.  
If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.  
When you have more than one ink cassette, keep one inside SELPHY, and put the other inside the  
original packaging or a bag to protect it from dust, and store it in a dark place.  
When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark  
place.  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing a Variety of Images  
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image.  
You do not need to repeat the settings for each image because once the settings are made, they are applied  
for all images.  
Making Settings  
Display the settings screen.  
1
Press the  
Press the  
press the  
k
button.  
buttons to select [Print Settings], then  
ud  
button.  
o
Select the item and change the settings.  
2
3
Pres
Pres
ud  
l r  
ttons to select an item.  
buons to change the settings, then press  
e  
tton to complete the setting.  
v
sinthe  
v
button again will restore the image  
y screen.  
r to pp. 18 – 21 for information about each setting.  
Print.  
Select an image for printing (p. 13) and the number of  
copies (p. 13), then press the  
button to print.  
p
1ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing With the Date (Date)  
You can print the shooting date recorded by the  
digital camera.  
Off (Default setting) /  
On  
08/08/2010  
Turning off SELPHY will return the setting to [  
Off].  
Since the date printed will be the date the image was recorded by the digital camera, it cannot be  
changed on SELPHY.  
You can change the style of the printed date in [Date Format] (p. 21).  
The date will not print if [  
Index], [  
ID Photo] or [  
Shuffle] is selected in [Page Layout] (p. 19).  
Getting the Best Results With Auto Correction (Image Optimize)  
SELPHY will automatically correct the image to  
achieve optimum image quality.  
Off / On (Default setting)  
Some images may not be adjusted correctly.  
Turning off SELPHY will return the settinOn
When [Page Layout] (p. 19) is set to [  
magOptimize] will not be applied.  
The level of correction will chane pene page layout and paper size.  
Correcting Red Eyes and Printing (Correct Red-Eye)  
Correct images with red-eye.  
Off (Default setting) /  
On  
Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [  
printing images with red-eye.  
On] only when  
If SELPHY is turned off or the memory card is removed, the setting will return to [  
Off].  
Red-eye may not be automatically detected or optimally corrected when faces appear extremely small,  
large, dark or bright in relation to the overall image, with faces turned to the side or diagonally, or faces  
with a portion hidden.  
Red-eye correction is not available if [  
Layout] (p. 19).  
2-up], [  
4-up], [  
8-up], or [  
Index] is selected in [Page  
When [ Sepia] or [ B/W] is selected in [My Colors] (p. 20), red-eye correction will not be applied.  
The level of correction will change depending on the page layout and paper size.  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Layout and Printing (Page Layout)  
You can set the number of images that you want  
to print on one sheet. The number of images that  
you specified (p. 13) will be printed in the selected  
layout.  
1-up  
(Default setting)  
Prints one image using a full sheet  
Index  
Prints as an index  
2-up  
4-up  
Prints two images on one sheet  
ID Photo  
Prints ID photos on one sheet  
Automatically arranges images in  
a variety of sizes for printing on a  
single sheet (p. 20)  
Prints four images on one sheet  
Prints eight images on one sheet  
Shuffle  
8-up*  
* Set the layout to [  
8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet) (p. 2).  
The settings will be retained even if SELPHY is turned off or the memory card is removed from the slot.  
The image position cannot be specified.  
Depending on the selected layout, the settings made in [Date] (p. 18), [Image Optimize] (p. 18), [Correct  
Red-Eye] (p. 18), [Borders] (p. 20), [Smooth Skin] (p. 21), or [Brhtness] (p. 21) may not be applied.  
If you select [Print All Images] (p. 15) in [  
Index], you cprt all images on a memory card as an  
index print.  
Printing an ID Photo (ID Photo)  
Prints two ID photos each in three different sizes for  
a total of six photos on a single sheet, as shown in  
the picture at the left.  
Prints can be made on L size or Postcard size paper  
(p. 2).  
Paper  
Picture Size  
45 x 35 mm  
(1.8 x 1.4 in.)  
40 x 30 mm  
(1.6 x 1.2 in.)  
30 x 24 mm  
(1.2 x 0.9 in.)  
L Size  
60 x 51 mm  
Postcard Size  
45 x 35 mm  
(1.8 x 1.4 in.)  
40 x 30 mm  
(1.6 x 1.2 in.)  
(2.4 x 2.0 in.)  
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please  
contact the appropriate institution for details.  
1ꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Arranging Images of Different Sizes (Shuffle)  
Shuffle automatically arranges images in a variety of  
sizes for printing.  
A group of up to 8 images, or a group of up to 20  
images can be printed on a single sheet.  
Prints can be made on L size or Postcard size paper  
(p. 2).  
In “Making Settings” (p. 17), press the  
ud  
buttons  
to select [Page Layout] in the screen in Step 2.  
Press the  
press the  
buttons to select [Shuffle], then  
button.  
l r  
o
When the screen shown on the left appears, press  
the buttons to select an option.  
ud  
Press the  
buttons to change the settings, then  
l r  
press the  
button to complete the setting.  
v
Pressing the  
v
button twice will restore the image  
display screen.  
The image position cannot be specified.  
If you select [20] in [Max. Images], it may take some time before images start printing.  
Printing With or Without a Border (Borders)  
can images to print with or without a border.  
orderls (Default setting) / Bordered  
Turning off SELPHY will return e setting to [  
If you select [  
8-up] when prinng on ard sized paper (p. 2), images will be printed without borders,  
even if [ Bordered] is selected in [Page Layout] (p. 19).  
].  
Borderless  
Changing the Color Tone and Printing (My Colors)  
You can adjust the colors in your images, or make your images sepia-toned or black and white.  
Off  
Intense, natural colors like those  
obtained with positive film  
—
Positive Film  
Sepia  
(Default setting)  
Emphasizes the contrast and color  
saturation for a vivid impression  
Vivid  
Changes the image to sepia tone  
Tones down the contrast and color  
saturation for neutral hues  
Neutral  
B/W  
Black and white  
Turning off SELPHY will return the setting to [ Off].  
Depending on the settings made in My Colors, [Correct Red-Eye] (p. 18) settings may not be  
applied.  
ꢅ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Skin Look Smooth in Prints (Smooth Skin)  
Makes skin look smooth and beautiful in prints.  
Off (Default setting) /  
On  
When printing is finished, turning off SELPHY and removing the memory card will return the setting to  
Off].  
Correction may be applied to areas other than skin, producing unexpected results.  
When [Page Layout] (p. 19) is set to [  
Index], [Smooth Skin] will not be applied.  
[
Adjusting the Brightness (Brightness)  
You can adjust the brightness of an image within a  
range of ±3.  
The larger the + value, the brighter the image gets.  
The larger the - value, the darker the image gets.  
Turning off SELPHY will return the setting to [0].  
[Brightness] is not available if [  
Index] is selected in [Page Layout] (p. 19).  
Changing the Date Format (Date Format)  
You can nge the order of the printed date  
).  
d/yy (Dfault Setting), dd/mm/yy, yy/mm/dd  
08/08/2010  
2010/8/08  
The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.  
ꢅ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Computer  
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and  
take advantage of various printing functions that cannot be done with just SELPHY alone. Following the audio  
guidance will allow inexperienced computer users to print easily.  
Select favorite images from the index and print  
You can select images you wish to print from an index, and print them all at  
once.  
Print with decorations  
You can add frames or stamps to your images and print. You can also add  
text to your images and print.  
Print calendars  
You can add calendars to your prints.  
System Requirements  
Wndows  
Macintosh  
Windows 7  
Windows Vista Service Pack 1,  
Service Pack 2  
OS  
Mac OS X v10.4 – v10.6  
Windows XP Service Pack 3  
Configuration  
The above OS should be pre-installed on computers with built-in USB ports.  
CPU  
Pentium 1.3 GHz or higher  
PowerPC G4/G5 or Intel Processor  
Windows 7 (64 bit): 2 GB or more  
Windows 7 (32 bit), Vista (64 bit, 32 bit): 1 GB Mac OS X v10.4 – v10.5: 512 MB or more  
RAM  
or more  
Mac OS X v10.6: 1 GB or more  
Windows XP: 512 MB or more  
Interface  
USB  
Free Hard Disk  
Space  
120 MB or more*  
1,024 x 768 pixels or more  
140 MB or more  
Display  
1,024 x 768 pixels or more  
*
For Windows XP, Microsoft .NET Framework 2.0 (max. 280 MB) must be installed. Installation may take some time  
depending on your computer’s capabilities.  
ꢅꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Starting the Software  
Windows Vista and Mac OS X 10.5 are used for these explanations.  
Items to Prepare  
Computer  
Supplied CD-ROM (COMPACT PHOTO PRINTER Solution Disk) (p. 2)  
A commercially available USB Cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Type B  
connector).  
Install the software.  
1
Windows  
Place the CD-ROM in the computer’s CD-ROM drive  
and click [Easy Installation] when the screen on the left  
appears.  
Follow the on-screen instructions to proceed.  
If the User Account Control window appears, follow the  
on-screen instructions to proceed.  
Proceed with thinstallation to display the screen on the  
left.  
Macintosh  
Place the CD-ROM in the computer’s CD-ROM drive and  
double-click  
.
When the screen on the left appears, click [Install] and  
follow the onscreen instructions to proceed.  
When the installation finishes, click [Finish] to restart the  
computer and complete the installation.  
Prepare SELPHY.  
2
Turn off SELPHY and remove the memory card or USB  
flash memory.  
Insert an ink cassette and a paper cassette that contains  
paper into SELPHY (pp. 8 – 10).  
ꢅ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect SELPHY to the computer.  
3
Use the USB cable to connect SELPHY to the computer.  
Refer to the user guide included with the cable or  
computer for handling instructions.  
Commercially available USB cable  
Turn on SELPHY.  
4
5
Press the  
q
button to turn on SELPHY.  
Windows  
When the installation finishes, click [Restart] to restart the  
computer and complete the installation.  
Confirm that the software has been started  
properly.  
The software will start and the screen on the left will  
appear when a connection between SELPHY and the  
computer is estblished.  
Perform Stps o 4 to automatically start the software  
the nextime ywant to use it.  
Windows  
If the screen in Step 5 oes not apen it from the [Start] menu  
r
[All Programs]  
r
[Canon Utilities]  
[SEPHY Photo Print]  
[SELPHY Photo Print].  
r
r
Macintosh  
If the screen in Step 5 does not appear, follow the procedure below to register your printer.  
After clicking [ ] in the menu, click [System Preferences], then [Print & Fax] to open the [Print  
& Fax] window. Click [+] to select [CP800] from the pop-up window, then click [Add].  
After you have finished registering your printer, click [SELPHY Photo Print] from the Dock (the  
bar at the bottom of the desktop), and the screen in Step 5 will appear.  
SELPHY may not operate correctly if it is connected to a computer via a USB hub.  
SELPHY may not function properly if other USB devices (with the exception of a USB mouse or USB  
keyboard) are used at the same time. Disconnect any other USB devices from your computer and then  
reconnect SELPHY.  
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the  
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without  
disconnecting the USB cable.  
For details on how to awaken the computer, refer to the user guide included with your computer.  
ꢅꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software to Print  
Use the installed software (SELPHY Photo Print) to print images from your computer.  
The [Simple print] feature will be explained in this section. Using this feature, you can view all your images at  
once and select which ones you want to print. If your computer is equipped with speakers, set the volume so  
that the audio guidance for necessary operations can be heard.  
Display the print menu.  
1
Click [Print menu].  
If printing preparations are not complete (paper cassette  
and ink cassette inserted), you cannot click [Print menu].  
Follow the audio guidance or onscreen instructions to  
perform the necessary operations.  
Select a print method.  
2
Click [Simple print].  
You can make prints with frames, stamps, and speech  
bubbles by clicking [Decoration print].  
You can make prints with calendars added by clicking  
[Calendar print
t aimage.  
3
You can select the conditionf
images to display.  
es will display in an index within the [My Pictures]  
er in Windows, and the [Pictures] folder in Macintosh.  
Click an image to select for printing.  
The background color changes and the  
image is set for printing.  
Use the same procedure to click all images  
you want to print.  
If you click an image again, the background  
color switches back to the original color and  
the settings are canceled.  
Select an image, then click [Next].  
You can display images saved in another folder by  
pressing this button and selecting a folder from the  
screen that appears.  
ꢅ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select the number of prints.  
4
Select the number of copies for each image.  
For Windows, click [Print] to start printing.  
For Macintosh, click [Print menu], then click [Print] in the  
screen that appears.  
Press the - or + buttons to set the  
number of prints.  
End the program.  
Windows  
5
When all printing is finished, click  
at the top right  
corner of the screen.  
Macintosh  
When all prntinis finished, click  
of the screen.  
at the top left corner  
Turning off Audio Guidance  
Audio guidance may not play prperly on smputers. If the audio guidance is difficult to hear,  
follow these steps to turn it off bore usig the software.  
Turning off Audio Guidance  
While in the screen from Step 1 in “Using the Software to  
Print” (p. 25), check the [Off] radio button.  
Audio guidance turns off.  
ꢅꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Digital Camera  
You can select and print images from a digital camera that supports the PictBridge standard.  
A Canon brand compact digital camera will be used as an example to explain the print method. If operations  
are different for the digital camera you use, refer to the user guide included with your digital camera.  
Make sure that a memory card is not inserted  
1
in SELPHY, and it is not connected to a  
computer.  
Connect SELPHY to the digital camera using  
2
the interface cable (USB cable) included with  
the digital camera.  
First turn on SELPHY, then turn on the  
3
digital camera and play back the images  
on the digial amera.  
Depon thdigital camera you use,  
on thal cama’s screen.  
may appear  
rm he necessary operations on your  
l camera to select an image for printing.  
Use the digital camera to start printing.  
4
Printing starts.  
After printing has completed, turn off SELPHY and the  
digital camera, then unplug the cable.  
You cannot stop printing with the  
button. Use the digital camera to stop printing.  
v
PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA). It  
allows you to print images taken with any digital camera or video camera, regardless of the manufacturer  
or model, by connecting to a printer without using a computer.  
ꢅꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Images Using Digital Camera Specified Settings (DPOF Print)  
You can make print settings and select images to print on your digital camera and then print the images all at  
once. For details, refer to the user guide included with your digital camera.  
Insert a memory card containing DPOF  
1
settings into the appropriate memory card slot.  
[DPOF images remain Print images?] appears on the  
screen.  
Label side  
Press the  
utton.  
o
2
3
Ck the settings.  
“Print type” set with the digital camera  
: Index  
: Standard  
Number of sheets required  
[Date] and [File No.] set with the digital camera  
Print.  
4
Press the  
p
button to start printing.  
The date and file number are the DPOF settings made with the digital camera (these settings cannot be  
changed with SELPHY).  
If, on a Canon brand digital camera, the [Print Type] is set to [Standard], the settings made in “Printing a  
Variety of Images” (pp. 17 – 21) will be applied.  
The screen in Step 3 can also be displayed when you press the  
button and select [DPOF  
k
Print], then press the  
button. [DPOF Print] only displays when a memory card is inserted that  
o
contains DPOF information set with the digital camera.  
ꢅꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Battery Pack  
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.  
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.  
* The number of possible prints is based on Canon testing standards, and may change depending on printing  
conditions.  
Installing the Battery  
Remove the battery cover.  
1
Slide and hold the cover lock (), then remove the cover  
towards ().  
Air Vents  
Remove the battery terminal cover.  
2
Attacatter
3
sert tab (), then push the battery () until it clicks  
locinto place.  
Charging the Battery  
Plug in SELPHY (p. 10).  
Charging starts and  
Charging completes after approximately 4 hours. and  
appears on the screen.  
disappears.  
If you press the  
q
button while the battery is charging (p.  
11), SELPHY can be used; however, charging will stop.  
When you turn SELPHY off (p. 11),  
appears and  
charging resumes.  
For cautions concerning the battery, refer to the user guide included with the battery.  
When  
is displayed and you press any button other than the  
button for 3 seconds or  
q
longer,  
will disappear. When the screen is turned off while the battery is charging and you  
button, will appear after approximately 10 seconds.  
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.  
If a red  
appears, the battery has reached the end of its life span. Purchase a new battery.  
press any button other than the  
q
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Mobile Phone  
Use the Bluetooth unit BU-30 (sold separately) for wireless printing of images taken with a Bluetooth  
equipped mobile phone. For details on how to use the mobile phone or on printing methods via Bluetooth  
refer to the user guide included with the mobile phone.  
Make sure that a memory card is not inserted  
1
in SELPHY, and it is not connected to a  
computer.  
Insert the Bluetooth unit.  
2
Remove the cover attached to BU-30 and insert it as  
shown.  
Turn on SELPHY (p. 11).  
Transfer images from your mobile phone to  
3
SELPHY.  
The Bluetooth t blinks blue during data transfer.  
Prinrts aftdata transfer is complete.  
Up to approx. 10 m (33 ft.)  
During transfer, the blue light othe Blutooth unit will blink. If transfer is interrupted, the unit will stop  
blinking. Follow the instructions dplayd on your mobile phone and try again.  
The following conditions may cause transfer to slow down or fail, even within a 10 m (33 ft.) range:  
- When there is an obstacle between the Bluetooth unit and the mobile phone  
- When there is electromagnetic interference from magnetic fields, static electricity, or radio waves in the  
area  
The maximum file size that can be transferred is 2 – 3 MB (varies depending on mobile phone).  
Data transfer time increases when data size is large. Therefore, the amount of time before printing may  
also increase.  
Depending on the mobile phone model you use, images saved on the memory card may not be printed.  
Depending on the color ink cassette/paper set (p. 2) you use, images may print with the edges cut off.  
Select Canon CP800 (XX:XX:XX) (X stands for one digit) when selecting a target device name on your  
mobile phone.  
You cannot establish a wireless connection between a computer and SELPHY.  
Movies, e-mail, address book information, or images attached to an e-mail or downloaded from the  
Internet cannot be printed.  
SELPHY automatically sets the print orientation.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you think there is a problem with SELPHY, first check the following. If the items below do not solve your  
problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.  
Power  
Power will not turn on  
• Make sure the plug is correctly connected (p. 10).  
• Hold the  
button pressed until the start-up image appears on the screen (p. 11).  
q
• When using a battery (sold separately), use a fully charged battery (p. 29).  
Printing Problems  
Cannot print  
• Make sure SELPHY is turned on (p. 11).  
• Make sure that the ink and paper cassettes are correctly inserted (p. 10).  
• When the ink is spent, replace the ink cassette with a new one. When the paper is spent, refill the paper  
cassette with new paper (p. 14).  
• Make sure you are using the correct combination of paper, paper cassette and ink cassette (p. 8).  
• Connect SELPHY to only one device at a time. If SELPHY is connected simultaneously to a digital  
camera, computer and has a memory card inserted, you may nt be able to print properly.  
• Make sure there is no slack in the ink sheet (p. 8).  
• Make sure that you are using dedicated paper (p. 9
• Depending on the room temperature, SELPHY may eat and emporarily stop operating. This is  
not a malfunction. Wait until the temperatuanprinting resumes. If SELPHY is connected to  
a computer, a message will appear on the scren. Do not cancel the print. Wait until printing  
resumes.  
Cannot display/print images from memory card or USB flash memory  
•
Make sure the memory card is insertd all e way into the correct slot with the label facing upward  
(pp. 12, 13).  
• Make sure the USB flash memory is inserted all the way, in the correct direction (p. 14).  
• Make sure you are using a supported image type (p. 12).  
• Make sure that any memory card requiring an adapter is inserted into the adapter before being inserted  
into the slot (p. 12).  
Printing from digital cameras  
• Make sure your digital camera supports PictBridge (p. 27).  
• Make sure SELPHY and the digital camera are connected correctly (p. 27).  
• Make sure the battery/batteries in your digital camera are not depleted. If there is insufficient charge,  
replace the battery with a fully charged one, or new batteries.  
Printing from computers  
• Make sure you installed the software according to the correct procedure (p. 23).  
• Make sure SELPHY is connected directly to a port on the computer with the USB cable (p. 24).  
• Problems Exclusive to Windows: Make sure the printer is not set to offline.  
If it is, right-click the printer icon and cancel the offline setting.  
• Problems Exclusive to Macintosh: Make sure SELPHY is registered on the Printer List (p. 24).  
Cannot print the date  
Printing from memory cards or USB flash memory  
• Make sure the date imprint option is set (p. 28).  
If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the  
DPOF settings.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing from mobile phones  
• The date cannot be imprinted on images sent from a mobile phone (p. 30).  
Printing from digital cameras  
• Make sure the date setting in your digital camera is set to [On]. However, if the setting is [Default], the  
date imprint settings of SELPHY will be used.  
Cannot make clean prints  
• Make sure the ink sheet and paper are not dusty.  
• Make sure there is no dust stuck on the inside surfaces of SELPHY (p. 34).  
• Make sure no condensation has formed on the inside surfaces of SELPHY (p. 34).  
• Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong magnetic  
field (p. 5).  
Colors on the computer display and the print are different  
• Color generation methods are different with computer screens and printers. Moreover, the variance may  
be attributable to the environment in which the screen is viewed (color and strength of the light), or to the  
screen’s color adjustment settings.  
After using the computer to cancel a print in progress, an image that had already been printed was  
printed again when printing resumed  
• When you restart printing on a Macintosh computer after canceling, an already printed image may print  
again when printing resumes.  
Paper Problems  
Paper will not fit into cassette  
• Make sure the paper size matches the size of the paper caset(p. 2).  
Paper is not feeding properly/frequent paper jams  
• Make sure the paper and paper cassette are correcrted (p8, 10).  
• Make sure there are less than 19 sheets in sse
• Make sure 19 or more sheets have not colthe uter lid of the paper cassette.  
• Make sure that you are using dedated pap
Cannot print the specified number printspaper left over  
• Canceling a print in progress or pullig on he ink sheet will consume ink. If paper runs out while printing  
many images, do not remove the ink cassette, as this will consume ink. Instead, refill the paper without  
removing the ink cassette.  
Paper is jammed  
• If the paper is sticking out from the front or back (paper ejection slot) (p. 6) of SELPHY, gently tug on  
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to  
forcibly pull it out. Turn the printer off and on repeatedly until the paper is ejected.  
Error Messages  
If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with the error  
message, follow the on-screen instructions. If no solution displays, refer to “Troubleshooting” (p. 31).  
If these items do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included  
customer support list.  
If a problem occurs while SELPHY is connected to a digital camera, an error message may appear on  
screen of the digital camera.  
3ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
SELPHY CP800  
Printing Method  
Dye-sublimation thermal transfer (with overcoating)  
Resolution/Color  
Representation  
300 x 300 dpi  
YMC (256 shades per color, 16.77 million colors per dot (max))  
(Resolution based on the “area intensity method” is equivalent to a 4800 x 4800  
dpi color representation)*1  
Ink  
Dedicated color ink cassette (Y/M/C/overcoating)  
Paper  
Postcard Size, L Size, Card Size (including full page label sheets, 8-label  
sheets)  
Print Size  
Borderless  
Bordered  
Postcard Size  
L Size  
100.0 x 148.0 mm (3.94 x 5.83 in.)  
89.0 x 119.0 mm (3.50 x 4.69 in.)  
54.0 x 86.0 mm (2.13 x 3.39 in.)  
22.0 x 17.3 mm (0.87 x 0.68 in.)  
91.4 x 121.9 mm (3.60 x 4.80 in.)  
79.2 x 105.3 mm (3.12 x 4.15 in.)  
50.0 x 66.7 mm (1.97 x 2.63 in.)  
Card Size  
(per label)  
Printing Speed*2  
Printing from memory cards/USB flash memory/Connected to cameras  
(PictBridge)  
Postcard Size  
L Size  
Card Size  
Approx. 47 sec.  
Approx. 39 sec.  
Approx. 24 sec.  
Feeding System  
Ejection System  
Screen  
Automatic paper feed from papeaette  
Automatic paper ejectiop of paer cassette  
Tilt-up, 2.5 type, TFT LCMonitor  
Interface  
USB  
Conneito e compliant device: USB compliant Type A connector  
Concting to a er: USB compliant Type B connector  
Wireless  
Bluetth*3  
Memory Cards  
CF (Comaclash) Card, Microdrive, xD-Picture Card*4, SD Memory Card,  
SDHC Memory Card, SDXC Memory Card, MultiMediaCard, MMCplus Card,  
HC MMCplus Card, miniSD Memory Card*4, miniSDHC Memory Card*4,  
microSD Memory Card*4, microSDHC Memory Card*4, microSDXC Memory  
Card*4, RS-MMC Card*4, MMCmobile Card*4, MMCmicro Card, Memory Stick,  
Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo, Memory Stick  
micro*4  
USB Flash Memory  
Operating Temperatures  
Operating Humidity  
Power Source  
FAT/exFAT only supported  
5 – 40 °C (41 – 104 °F)  
20 – 80 %  
Compact Power Adapter CA-CP200 W  
Battery pack NB-CP2L (sold separately)  
Power Consumption  
Dimensions  
60 W or less (4 W or less on standby)  
177.0 x 134.6 x 68.8 mm (6.97 x 5.30 x 2.71 in.)  
Approx. 940 g (approx. 33.2 oz.)  
Weight (printer only)  
1
*
The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per  
dot. In comparison, printers using the area intensity method represent shades by the number of dots printed in  
a unit of area, i.e. 256 dots (16 dots vertical x 16 dots horizontal) are needed to represent the same 256 shades  
of color. SELPHY’s color representation is therefore equivalent to a 4800 x 4800 dpi resolution based on an area  
intensity method.  
• Gradation refers to the number of shades that can be represented on a print. For example, black and white  
has two gradations, while 256 gradations include the shades of gray going from white to black that can be  
represented.  
• “dpi” refers to the number of dots that can be printed in 1 inch (“dots per inch”).  
Measured from start of the yellow printing pass to final output.  
2
3
4
*
*
*
Bluetooth unit BU-30 (sold separately) is required.  
Dedicated adapter (commercially available) is required.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compact Power Adapter CA-CP200 W  
Rated Input  
100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)  
Rated Output  
24 V DC, 2.2 A  
Operating Temperatures  
Weight  
0 – 40 °C (32 – 104 °F)  
Approx. 310 g (10.9 oz.)  
Battery Pack NB-CP2L (Sold Separately)  
Type  
Rechargeable lithium-ion battery  
Nominal Voltage  
Nominal Capacity  
Battery Life (Charge Cycles)  
Operating Temperatures  
Dimensions  
22.2 V DC  
1200 mAh  
Approx. 300 times  
5 – 40 °C (41 – 104 °F)  
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)  
Approx. 230 g (8.11 oz.)  
Weight  
All data is based on tests by Canon.  
Printer specifications or appearance are subject to change without notice.  
As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY  
STAR guidelines for energy efficiency.  
CAUTION  
RISK OF EXPLOSION IF BATTERY IS REPLACED AN IORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING TAL REGULATION.  
Handling Precautions  
Do not subject the printer to excessive force. Force or impact on the printer may result in paper jams or  
equipment damage.  
Be careful not to spray the equipment with insecticides or other volatile substances. In addition, do not  
store the equipment in contact with rubber or vinyl products for long periods of time. This may cause  
deterioration of the casing.  
Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not a  
malfunction. SELPHY will resume normal printing as soon as it cools down. Temporary stoppages increase  
printing time and are most likely to occur when printing continuously, if a room is unusually warm, or if the  
air vents on the back of SELPHY are blocked and internal temperature is high.  
Avoid condensation on SELPHY when moving it from a cold to a warm place by putting it in an airtight,  
sealable plastic bag and allowing for adjustment to temperature changes gradually before removing from  
the bag. In the event that condensation does form within SELPHY, keep it at room temperature until the  
water droplets evaporate naturally before use.  
When SELPHY becomes dirty, wipe the casing with a soft dry cloth.  
When dust or dirt has accumulated on the battery cover or vents (pp. 6, 29), be sure to remove the ink  
cassette (p. 14) before cleaning. If dust gets in through the vents, the printer may not print cleanly.  
Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may cause  
deformation or peeling of the casing.  
3ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USA and Canada only:  
The Lithium ion/polymer battery is recyclable.  
Please call 1-800-8-BATTERY for information on how to recycle this battery.  
FCC Notice  
(Printer, Model CD1085, CD1093 Systems)  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause undesired operation.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from at twhich the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician help.  
The cable with the ferrite core provided with the prir mussed with this equipment in order to comply with  
Class B limits in Subpart B of Part 15 of the FCC
Do not make any changes or modificatns to the nt unless otherwise specified in the manual. If such  
changes or modifications should be mae, you could be required to stop operation of the equipment.  
Canon U.S.A., Inc.  
One Canon Plaza, Lake Success, NY 11042, U.S.A.  
Tel No. (516) 328-5600  
Canadian Radio Interference Regulations  
This Class B digital apparatus complies with Canadian ICES-003.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademark Acknowledgments  
SDXC Logo is a trademark of SD-3C, LLC.  
This device incorporates exFAT technology licensed from Microsoft.  
Portions of the code used in this firmware are based in part on the work of the Independent JPEG  
Group.  
About This Guide  
Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission  
of Canon is prohibited.  
Canon reserves the right to change the contents of this guide at any time without prior notice.  
Illustrations and screenshots in this guide may differ slightly from the actual equipment.  
The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation  
of the products.  
This product is designed to achieve excellent performance when used with genuine Canon  
accessories. Canon shall not be liable for any damage to this product and/or accidents such as  
fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or  
explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of  
the malfunction of non-genuine Canon accessories, although you may request such repairs on a  
chargeable basis.  
CDI-E434-030  
© CANON INC. 2010  
PRINTED IN CHINA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printer User Guide  
ENGLISH  
Make sure you read this guide, including the “Safety  
Precautions” section, before using the printer.  
Store this guide safely so that you can use it in the future.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
Check if the following items are included in your printer package, using the □ check boxes.  
If anything is missing, contact the retailer where you purchased the printer.  
□ SELPHY Printer Unit  
□ Compact Power Adapter  
□ Power Cord  
CA-CP200 W  
□ Paper Cassette (Postcard Size)  
□ Paper Cassette (Card Size)*  
□ CD-ROM:  
PCP-CP300  
PCC-CP300  
COMPACT PHOTO  
PRINTER Solution Disk  
□
Printer User Guide (This Guide)  
□
Support Guide  
□ Warranty Card  
* Card size paper cassette may not be included deg on e region.  
Ink and Paper (Sold Sarately)  
Before using the printer, be sure to purchaColor Ink Cassette/Paper Set separately.  
Color Ink Cassette/Paper Set  
Necessary Paper Cassette  
Number of  
Possible Prints  
Product Name  
Paper Size  
Color Ink Cassette/Paper Set KP-36IP  
(Postcard)  
36  
72  
Color Ink Cassette/Paper Set KP-72IN  
(Photo Paper)  
Paper Cassette PCP-CP300  
(Included with SELPHY)  
Postcard Size  
Color Ink Cassette/Paper Set KP-108IN  
(Photo Paper)  
108  
36  
Color Ink Cassette/Paper Set KC-36IP  
Color Ink Cassette/Label Set KC-18IF  
(Full-page labels)  
18  
Card Size  
Paper Cassette PCC-CP300  
Color Ink Cassette/Label Set KC-18IL  
(8-label sheets)  
18  
Some accessories may not be available depending on the region.  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read This First  
Warning Against Copyright Infringement  
The images printed with this product should be intended for personal use. Do not print images that  
infringe upon copyright laws without the prior permission of the copyright holder.  
Warranty Limitations  
This product’s warranty is only effective in the country of sale. If there is a problem with the printer  
while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon  
Customer Support Help Desk.  
LCD Monitor (Screen)  
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than  
99.99% of the pixels operate to specification. However, some pixels may occasionally misfire or  
appear as red or black dots. This has no effect on the printed image and does not constitute a  
malfunction.  
The LCD monitor may be covered with a thin plastic film for protection against scratches during  
shipment. If so, remove the film before using the printer.  
Conventions Used in this Guide  
This printer will be referred to as “SELPHY” or “printer”.  
The various types of memory cards that can be used in this ptare collectively referred to as “memory  
cards”.  
Icons are used in the text to represent SELPHY’s buttor detai, refer to “Controls”  
(p. 6).  
Language that displays on the screen appea[ ] (uare brackets).  
: Things you should be careful aout  
: Supplemental information  
(p. XX) : Reference pages (“XX” stans for page number)  
This guide assumes all functions are at their default settings.  
Table of Contents  
Package Contents ________________________ 2  
Ink and Paper (Sold Separately) _____________ 2  
Read This First __________________________ 3  
Conventions Used in this Guide _____________ 3  
Safety Precautions _______________________ 4  
Setting Up SELPHY_______________________ 5  
Components Guide _______________________ 6  
Information Displayed on the Screen _________ 7  
Getting Started __________________________ 8  
Setting the Display Language _______________11  
Compatible Memory Cards and  
Storing the Printed Photos _________________16  
Cleaning Up After Printing __________________16  
Printing a Variety of Images_________________17  
Printing From Your Computer ______________ 22  
Installing and Starting the Software__________ 23  
Using the Software to Print ________________ 25  
Printing From Your Digital Camera __________ 27  
Printing Images Using Digital Camera Specified  
Settings (DPOF Print) ____________________ 28  
Using the Battery Pack ___________________ 29  
Printing From Your Mobile Phone ___________ 30  
Troubleshooting__________________________31  
Specifications __________________________ 33  
Handling Precautions ____________________ 34  
Memory Card Slots _______________________12  
Images That Can Be Printed ________________12  
Selecting and Printing Images_______________13  
Printing All Images________________________15  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Before using the product, please ensure that you read the safety precautions described below. Always  
ensure that the product is used correctly.  
The safety precautions noted on the following pages are intended to prevent injuries to yourself and other  
persons, or damage to the equipment.  
Be sure to also check the guides included with any separately sold accessories you use.  
Denotes the possibility of serious injury or death.  
Warning  
Store this equipment out of the reach of children and infants.  
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.  
Use only recommended power sources.  
Do not attempt to disassemble, alter or apply heat to the product.  
Avoid dropping or subjecting the product to severe impacts.  
To avoid the risk of injury, do not touch the interior of the printer if it has been dropped or otherwise  
damaged.  
Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves  
abnormally.  
Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.  
Do not let the product come into contact with water (e.g. sea water) or other liquids.  
Do not allow liquids or foreign objects to enter the printer.  
This could result in electrical shock or fire.  
If liquid comes into contact with the product, unplug it from the oand consult your retailer or a Canon  
Customer Support Help Desk.  
Do not touch this printer or the power plug ring derstorms.  
This could result in electrical shock or fire. Immstop using the equipment and distance yourself from it.  
Unplug the power cord periodicay and wiany dust and dirt that has collected on the plug,  
the exterior of the power outlet, ad the surrding area with a dry cloth.  
Do not handle the power cord with wet hnds.  
Do not use the equipment in a mannehat exceeds the rated capacity of the electrical outlet or  
wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the  
outlet.  
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.  
Do not cut, damage, alter or place heavy items on the power cord.  
This could result in electrical shock or fire.  
Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.  
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible  
to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD  
player.  
Denotes the possibility of injury.  
Caution  
Do not stick any part of your hand into the printer interior.  
Be sure to place SELPHY safely so as to avoid tripping over the power cord.  
This could lead to injury or damage the printer.  
Avoid using, placing or storing the printer in the following places.  
Places subject to strong sunlight. Places subject to temperatures above 40 °C (104 °F).  
Humid or dusty areas. Places subject to strong vibrations.  
These could result in electrical shock, burns, fire or other injuries.  
High temperatures may cause deformation of the adapter or printer casing.  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Denotes the possibility of damage to the equipment.  
Caution  
Unplug the product from the power outlet when you are not using it.  
Do not place anything, such as cloth, on top of the printer while in use.  
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting  
in fire.  
Never reuse paper for printing, even if an image is only printed on part of the paper, and there is  
leftover blank space as shown.  
Reusing paper to print can cause the ink sheet to become stuck to the paper or cause paper jams and  
damage the printer.  
Setting Up SELPHY  
lace PHY on a stable and even surface, such as a  
e. Nver place it on an unstable or tilted surface.  
SELPHY at least 1 m (3 ft.) from devices emitting  
romagnetic waves or strong magnetic fields.  
More than the  
length of the  
paper  
Make sure there is at least 10 cm (4 in.) of free space  
around SELPHY.  
Since paper will pass in and out of SELPHY during  
printing, make sure the space behind the printer is greater  
than the length of the paper.  
10 cm (4 in.)  
or more  
10 cm (4 in.)  
or more  
Never place SELPHY close to motors or other devices that generate strong electromagnetic fields.This  
may damage the printer or cause it to malfunction.  
Do not place near a television or radio. This may cause the printer to malfunction.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Components Guide  
Card Slots (p. 12)  
Paper Cassette  
Ink Cassette Lock (p. 14)  
Compartment (p. 10)  
Ink Cassette Compartment (p. 10)  
Ink Cassette Compartment Cover  
(p. 10)  
Paper Cassette  
Compartment Cover (p. 10)  
USB Terminal for Digital Camera/  
USB Flash Memory Connection  
(pp. 14, 27, 30)  
USB Terminal for Computer  
Connection (p. 24)  
Battery/Battery Cover  
Lock (p. 29)  
Battery Cover (p. 29)  
(Air vents are behind  
the battery cover (p. 34))  
DC IN (Power Input) Terminal  
(p. 10)  
Security Slot*  
Paper Ejection Slot  
*
Security cables, such as a Kensington lock, can be attached to this slot.  
Controls  
    
Icons Used in This  
Name  
Function  
Guide  
—
q
Screen (LCD Monitor)  
Power Button  
Displays images, settings screens, or error messages (p. 32).  
Turns SELPHY on or off (p. 11).  
Menu Button  
Displays the menu screen (p. 11).  
k
o
u
OK Button  
Sets the selected item.  
Up/+ Copies Button  
Specifies number of copies, selects items to set.  
Switches images, changes settings.  
Down/– Copies Button  
d
Left Button  
Right Button  
Back Button  
Print Button  
l
r
Restores the previous screen (p. 7), cancels printing (p. 14).  
Starts printing (p. 14).  
v
p
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information Displayed on the Screen  
Memory card slot (p. 12) currently  
in use (An SD card is used in this  
example)  
Paper orientation  
Print settings (pp. 18 – 21)  
(Settings that are not available are  
grayed out)  
File number  
Installed ink cassette type  
(Postcard size is used in this example)  
Total number of images to be printed  
Number of copies for the displayed image  
Hiding Information Displayed on the Screen  
You can hide the information displayed on the screen and view images at a larger size.  
Display the seings screen.  
1
Follops 1 on p. 11.  
the setting.  
2
Pess the  
Press the  
ud  
l r  
buttons to select [Info Display].  
buttons to select [Off], then press the  
v
button to complete the setting.  
Pressing the  
button again will restore the image  
v
display screen.  
The image will display full screen, and a frame that  
indicates the printing area will appear.  
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Preparations for printing images. A Postcard size Color Ink Cassette/Paper Set (sold separately) (p. 2) will be  
used as an example, however Color Ink Cassette/Paper Sets other than Postcard size may also be used in  
the same way to prepare for printing.  
Preparing the Ink Cassette  
Check the ink cassette.  
Check that the paper size and the size shown on the color  
ink cassette (Card size, Postcard size etc.) match.  
Check that the ink sheet is taut with no slack. If the ink  
sheet is slack, push and turn the sprocket as shown in the  
illustration.  
If you overwind the ink sheet, it may not be possible to  
use all the paper for printing and the ink sheet may tear.  
Ink sheet  
Do not touch or pull on the ink sheet. Do not touch the ink cassette with wet or sweaty hands. You may not  
be able to print if the ink sheet is damaged, dirty or wet.  
Preparing the Paper Cassette  
Check paper size.  
1
2
ck tat the prepared ink cassette and the size shown  
e paper cassette (Card size, Postcard size, etc.)  
h.  
Open the lid.  
There are two steps to open the lid. Open the outer lid (  
)
first, then open the inner lid ( ).  
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set the paper.  
3
Set the paper into the paper cassette that you prepared.  
You can place up to 18 sheets in the paper cassette.  
Inserting 19 or more sheets may damage the printer or  
cause malfunction.  
Shiny side  
Hold the paper as shown in the illustration, with the shiny  
side facing up and put it into the paper cassette. Do not  
touch the print side (shiny side) of the paper with your  
fingers. This may prevent you from making clean prints.  
If a protective sheet is included with the paper, remove it  
and set the paper only into the cassette.  
When making Postcard size prints that have a section  
for pasting a stamp, insert the paper so that the stamp  
section is facing the direction shown in the illustration.  
Close the lid.  
4
Close the ier d until it clicks into place.  
Leave outed open during printing.  
Use only dedicated paper for use SEPHY CP series printers included in the genuine Canon brand  
Color Ink Cassette/Paper Sets. Regular printing paper, regular postcards, or dedicated paper for SELPHY  
ES series printers cannot be used.  
Never do the following, as it may result in failure or cause the printer to malfunction:  
- reverse the paper (the shiny side is the print side)  
- bend or separate the paper at the perforations before printing  
- use label sheets that have begun to peel or label sheets with portions peeled back  
- write on a sheet before printing  
- print on already printed paper  
- reuse a spent ink cassette  
Do not touch the springs of the paper cassette.  
If the springs are bent or deformed, paper will not feed correctly into  
SELPHY.  
Do not touch or scratch the print surface (shiny side), or touch the  
paper with wet hands. If the print surface becomes dirty or wet, you  
will not be able to make clean prints.  
Spring  
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Ink and Paper Cassettes  
Open the covers.  
1
2
3
Open the covers for the ink cassette and paper cassette  
compartments.  
Insert the ink cassette.  
Insert the ink cassette into the printer in the direction  
indicated by the arrow on the cassette until it clicks and  
locks into place.  
Close the ink cassette compartment cover.  
Insert the paper cassette.  
Make sure that the outer lid is open (p. 8) and insert the  
paper cassette l the way into the compartment.  
Connecting SELPHY  
Plug the adapter cord into SELPHY.  
1
2
Fully insert the adapter plug into SELPHY.  
Connect the power cord.  
Connect the power cord to the compact power adapter,  
then plug the other end into a power outlet.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Display Language  
You can change the language displayed in the LCD monitor menus and messages.  
Turn on SELPHY.  
1
Press and hold the  
the left displays.  
q
button until the screen shown at  
To turn the power off, press and hold the  
q
button again  
until the displayed screen changes or turns off.  
Adjust the screen for ease of viewing.  
2
3
Raise the LCD monitor and adjust until the screen is  
easily visible.  
Do not raise the LCD monitor more than 45° as this may  
result in damage or malfunction.  
Approx. 45°  
Display the settings screen.  
Press the  
Press the  
pres
k
bon.  
ttons to select [Printer Setup], then  
u
bon.  
o
Display the language settings screen.  
4
5
Press the  
Press the  
ud  
o
buttons to select [Language].  
button.  
Select a language.  
Press the  
udl r  
buttons to select a language, then  
press the  
button.  
o
Pressing the  
v
button twice will restore the screen in  
Step 1.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible Memory Cards and Memory Card Slots  
Memory Cards That Can be  
Used Without an Adapter  
Memory Cards That Require an Adapter  
(commercially available)  
Card Slots  
SD Memory Card  
SDHC Memory Card  
SDXC Memory Card  
miniSD Memory Card  
miniSDHC Memory Card  
microSD Memory Card  
microSDHC Memory Card  
microSDXC Memory Card  
RS-MMC Card *1  
MMCmobile Card  
MMCmicro Card  
MultiMediaCard  
MMCplus Card  
+
SD/MMC  
HC MMCplus Card  
2
CF (CompactFlash) Card  
Microdrive  
xD-Picture Card  
*
CF/microdrive  
Memory Stick  
Mmory Stick micro  
Memory Stick PRO  
Memory Stick Duo  
Memory Stick PRO Duo  
MS/MS Duo  
*1 “RS-MMC” is an abbreviation of “Reducd-ze Card”.  
*2 Purchase the CompactFlash Card Adater for xD-Card.  
For memory cards that require an daer, be sure to first insert the memory card into the adapter before  
inserting into the appropriate card slot.  
If you insert the memory card into a card slot without using an adapter, you may not be able to remove  
the memory card from the printer.  
Use a memory card formatted in the device used for taking the images. A memory card formatted on a  
computer may not be recognized.  
Refer to the user guide included with your memory card and adapter for handling instructions.  
About USB Flash Memory  
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p. 14).  
Images That Can Be Printed  
JPEG images conforming to the Exif standard can be printed with SELPHY.  
Irregularly sized images, or images that have been edited on a computer may not display or print properly.  
1ꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting and Printing Images  
You can select an image and specify the number of copies for printing. In this section, an SD memory card  
will be used as an example, but you can print from other memory cards using the same steps.  
Turn on SELPHY.  
1
Press and hold the  
the left displays.  
q
button until the screen shown at  
To turn the power off, press and hold the  
q
button again  
until the displayed screen changes or turns off.  
Adjust the screen for ease of viewing.  
2
3
Raise the LCD monitor and adjust until the screen is  
easily visible.  
Do not raise the LCD monitor more than 45° as this may  
result in damage or malfunction.  
Approx. 45°  
Insert a single memory card into the slot.  
Inseremory ard fully into the appropriate slot.  
The in Ste4 below (image display screen) (p. 7)  
ll diy.  
Label side  
Select an image.  
4
5
Press the  
l r  
buttons to select an image to print.  
If you press and hold one of the  
jumps by 5 images.  
l r  
buttons, the display  
Select the number of copies.  
Press the  
ud  
buttons to select the number of copies.  
If you press and hold one of the  
ud  
increases or decreases by 5 copies.  
You can select up to 99 copies per image.  
To print another image, repeat Steps 4 and 5.  
buttons, the number  
Number of copies  
for the displayed  
image  
Total number  
of images to be  
printed  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Print.  
6
Press the  
p
button to start printing.  
During printing, the paper will pass in and out from the  
back of SELPHY several times. Do not touch the paper  
until printing has finished and the printed sheets collect  
on the print output tray (on the outer lid of the paper  
cassette).  
Do not let 19 or more printed sheets collect on the print  
output tray.  
To cancel printing, press the  
v
button.  
Insert the paper.  
7
8
When the paper is depleted, remove the paper cassette  
from SELPHY.  
Refill the paper cassette with new paper (p. 8), and  
reinsert the cassette into SELPHY (p. 10).  
Change the ink cassette.  
When the color ink is depleted, open the ink cassette  
compartment cover and move the lock as shown in the  
illustration. The ink cassette will be ejected.  
Insert a new ink cassette (pp. 8, 10).  
Never pull out the paper cassette, open the tte cmpartment cover, or remove the memory card  
while you can hear the printer’s oeration somediately after turning on the printer, or during printing.  
This may cause the printer to manction.  
It may take some time before images display if the memory card contains a large number of images.  
When the total number of copies for printing is set to 0 and you press the  
button, the currently  
p
displayed image will print once.  
If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified  
Settings (DPOF Print)” (p. 28).  
Printing From USB Flash Memory  
Just like images on memory cards, images on commercially available USB flash memory can also be printed.  
Insert a USB flash memory.  
Insert a USB flash memory as shown.  
All further steps are the same as those used for printing  
images from memory cards (pp. 13 – 14).  
Depending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not  
operate properly.  
Refer to the user guide included with your USB flash memory for operating instructions.  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing All Images  
You can print all images on a memory card at once.  
Display the menu.  
1
2
Press the  
k
button.  
Display the settings screen.  
Press the  
ud  
buttons to select [Print All Images], then  
press the  
button.  
o
Selecnumbr of copies.  
3
4
ss t
ud  
buttons to set the number of copies.  
an elect up to 99 copies per image. If there are  
than 1000 images on the card, only 999 copies will  
be printed in order of the most recent by shooting date.  
Number of sheets  
required  
Number of copies  
Print.  
Press the  
p
button to start printing.  
To cancel printing, press the  
v
button.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Storing the Printed Photos  
When both edges of a print have perforations, you can remove the edges  
by bending them.  
Use an oil-based pen to write on prints.  
To prevent discoloration, do not store prints in places subject to  
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct  
sunlight.  
Avoid the following actions as they may result in color change, color  
fading or color bleeding: Sticking any type of adhesive tape on a print  
surface, allowing print surfaces to come into contact with vinyl or plastic, applying alcohol or other volatile  
solvents to a print surface, or leaving the print surface tightly pressed against other surfaces or objects for  
prolonged periods.  
If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene or  
cellophane.  
Color may change over time or depending on storage conditions. Canon assumes no liability for color  
changes.  
Cleaning Up After Printing  
After you finish printing, follow the steps below to clean up and storSELPHY.  
Turn off SELPHY (p. 11), then remove the memory carSB flh memory.  
Lower the screen (LCD monitor) completely for stora
Unplug the power cord from the power outlet iscoct the adapter plug from SELPHY.  
If the compact power adapter is hot, wait unoold down before you store it.  
Remove the paper cassette and closte paette compartment cover. Keep the remaining paper  
inside the cassette and store the casette in a ace free from dust.  
Keep the ink cassette inside SELPH.  
Store SELPHY horizontally, in a dark ace ee from dust.  
When not using SELPHY, make sure to store the printer with the screen (LCD monitor) completely  
lowered.  
If dust enters SELPHY and sticks to the paper or color ink, print quality will deteriorate.  
When you have more than one ink cassette, keep one inside SELPHY, and put the other inside the  
original packaging or a bag to protect it from dust, and store it in a dark place.  
When storing new paper and ink cassettes, leave them in unopened packages, and keep them in a dark  
place.  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing a Variety of Images  
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image.  
You do not need to repeat the settings for each image because once the settings are made, they are applied  
for all images.  
Making Settings  
Display the settings screen.  
1
Press the  
Press the  
press the  
k
button.  
buttons to select [Print Settings], then  
ud  
button.  
o
Select the item and change the settings.  
2
3
Pres
Pres
ud  
l r  
ttons to select an item.  
buons to change the settings, then press  
e  
tton to complete the setting.  
v
sinthe  
v
button again will restore the image  
y screen.  
r to pp. 18 – 21 for information about each setting.  
Print.  
Select an image for printing (p. 13) and the number of  
copies (p. 13), then press the  
button to print.  
p
1ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing With the Date (Date)  
You can print the shooting date recorded by the  
digital camera.  
Off (Default setting) /  
On  
08/08/2010  
Turning off SELPHY will return the setting to [  
Off].  
Since the date printed will be the date the image was recorded by the digital camera, it cannot be  
changed on SELPHY.  
You can change the style of the printed date in [Date Format] (p. 21).  
The date will not print if [  
Index], [  
ID Photo] or [  
Shuffle] is selected in [Page Layout] (p. 19).  
Getting the Best Results With Auto Correction (Image Optimize)  
SELPHY will automatically correct the image to  
achieve optimum image quality.  
Off / On (Default setting)  
Some images may not be adjusted correctly.  
Turning off SELPHY will return the settinOn
When [Page Layout] (p. 19) is set to [  
magOptimize] will not be applied.  
The level of correction will chane pene page layout and paper size.  
Correcting Red Eyes and Printing (Correct Red-Eye)  
Correct images with red-eye.  
Off (Default setting) /  
On  
Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [  
printing images with red-eye.  
On] only when  
If SELPHY is turned off or the memory card is removed, the setting will return to [  
Off].  
Red-eye may not be automatically detected or optimally corrected when faces appear extremely small,  
large, dark or bright in relation to the overall image, with faces turned to the side or diagonally, or faces  
with a portion hidden.  
Red-eye correction is not available if [  
Layout] (p. 19).  
2-up], [  
4-up], [  
8-up], or [  
Index] is selected in [Page  
When [ Sepia] or [ B/W] is selected in [My Colors] (p. 20), red-eye correction will not be applied.  
The level of correction will change depending on the page layout and paper size.  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Layout and Printing (Page Layout)  
You can set the number of images that you want  
to print on one sheet. The number of images that  
you specified (p. 13) will be printed in the selected  
layout.  
1-up  
(Default setting)  
Prints one image using a full sheet  
Prints two images on one sheet  
Index  
Prints as an index  
2-up  
4-up  
ID Photo  
Prints ID photos on one sheet  
Automatically arranges images in  
a variety of sizes for printing on a  
single sheet (p. 20)  
Prints four images on one sheet  
Prints eight images on one sheet  
Shuffle  
8-up*  
* Set the layout to [  
8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet) (p. 2).  
If SELPHY is turned off, the setting will return to [  
You can keep the setting even if SELPHY is turned off. To retain the layout, make sure SELPHY is turned  
off, press and hold the , and buttons, then press the button to turn on SELPHY. To disable  
1-up].  
,
k u  
p
q
this function so that settings are not saved, repeat the above ocedure.  
The image position cannot be specified.  
Depending on the selected layout, the settings mad[Date. 18), [Image Optimize] (p. 18), [Correct  
Red-Eye] (p. 18), [Borders] (p. 20), [Smooth Skin] r [Brigness] (p. 21) may not be applied.  
If you select [Print All Images] (p. 15) in [  
dex], an print all images on a memory card as an  
index print.  
Printing an ID Photo (ID Poto)  
Prints two ID photos each in three different sizes for  
a total of six photos on a single sheet, as shown in  
the picture at the left.  
Prints can be made on L size or Postcard size paper  
(p. 2).  
Paper  
Picture Size  
45 x 35 mm  
(1.8 x 1.4 in.)  
40 x 30 mm  
(1.6 x 1.2 in.)  
30 x 24 mm  
(1.2 x 0.9 in.)  
L Size  
60 x 51 mm  
Postcard Size  
45 x 35 mm  
(1.8 x 1.4 in.)  
40 x 30 mm  
(1.6 x 1.2 in.)  
(2.4 x 2.0 in.)  
The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please  
contact the appropriate institution for details.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Arranging Images of Different Sizes (Shuffle)  
Shuffle automatically arranges images in a variety of  
sizes for printing.  
A group of up to 8 images, or a group of up to 20  
images can be printed on a single sheet.  
Prints can be made on L size or Postcard size paper  
(p. 2).  
In “Making Settings” (p. 17), press the  
ud  
buttons  
to select [Page Layout] in the screen in Step 2.  
Press the  
press the  
buttons to select [Shuffle], then  
button.  
l r  
o
When the screen shown on the left appears, press  
the buttons to select an option.  
ud  
Press the  
buttons to change the settings, then  
l r  
press the  
button to complete the setting.  
v
Pressing the  
v
button twice will restore the image  
display screen.  
The image position cannot be specified.  
If you select [20] in [Max. Images], it may take some time before images start printing.  
Printing With or Without a Border (Borders)  
can images to print with or without a border.  
orderls (Default setting) / Bordered  
Turning off SELPHY will return e setting to [  
If you select [  
8-up] when prinng on ard sized paper (p. 2), images will be printed without borders,  
even if [ Bordered] is selected in [Page Layout] (p. 19).  
].  
Borderless  
Changing the Color Tone and Printing (My Colors)  
You can adjust the colors in your images, or make your images sepia-toned or black and white.  
Off  
Intense, natural colors like those  
obtained with positive film  
—
Positive Film  
Sepia  
(Default setting)  
Emphasizes the contrast and color  
saturation for a vivid impression  
Vivid  
Changes the image to sepia tone  
Tones down the contrast and color  
saturation for neutral hues  
Neutral  
B/W  
Black and white  
Turning off SELPHY will return the setting to [ Off].  
Depending on the settings made in My Colors, [Correct Red-Eye] (p. 18) settings may not be  
applied.  
ꢄ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Skin Look Smooth in Prints (Smooth Skin)  
Makes skin look smooth and beautiful in prints.  
Off (Default setting) /  
On  
When printing is finished, turning off SELPHY and removing the memory card will return the setting to  
Off].  
Correction may be applied to areas other than skin, producing unexpected results.  
When [Page Layout] (p. 19) is set to [  
Index], [Smooth Skin] will not be applied.  
[
Adjusting the Brightness (Brightness)  
You can adjust the brightness of an image within a  
range of ±3.  
The larger the + value, the brighter the image gets.  
The larger the - value, the darker the image gets.  
Turning off SELPHY will return the setting to [0].  
[Brightness] is not available if [  
Index] is selected in [Page Layout] (p. 19).  
Changing the Date Format (Date Format)  
You can nge the order of the printed date  
).  
d/yy (Dfault Setting), dd/mm/yy, yy/mm/dd  
08/08/2010  
2010/8/08  
The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.  
ꢄ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Computer  
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and  
take advantage of various printing functions that cannot be done with just SELPHY alone. Following the audio  
guidance will allow inexperienced computer users to print easily.  
Select favorite images from the index and print  
You can select images you wish to print from an index, and print them all at  
once.  
Print with decorations  
You can add frames or stamps to your images and print. You can also add  
text to your images and print.  
Print calendars  
You can add calendars to your prints.  
System Requirements  
Wndows  
Macintosh  
Windows 7  
Windows Vista Service Pack 1,  
Service Pack 2  
OS  
Mac OS X v10.4 – v10.6  
Windows XP Service Pack 3  
Configuration  
The above OS should be pre-installed on computers with built-in USB ports.  
CPU  
Pentium 1.3 GHz or higher  
PowerPC G4/G5 or Intel Processor  
Windows 7 (64 bit): 2 GB or more  
Windows 7 (32 bit), Vista (64 bit, 32 bit): 1 GB Mac OS X v10.4 – v10.5: 512 MB or more  
RAM  
or more  
Mac OS X v10.6: 1 GB or more  
Windows XP: 512 MB or more  
Interface  
USB  
Free Hard Disk  
Space  
120 MB or more*  
1,024 x 768 pixels or more  
140 MB or more  
Display  
1,024 x 768 pixels or more  
*
For Windows XP, Microsoft .NET Framework 2.0 (max. 280 MB) must be installed. Installation may take some time  
depending on your computer’s capabilities.  
ꢄꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Starting the Software  
Windows Vista and Mac OS X 10.5 are used for these explanations.  
Items to Prepare  
Computer  
Supplied CD-ROM (COMPACT PHOTO PRINTER Solution Disk) (p. 2)  
A commercially available USB Cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Type B  
connector).  
Install the software.  
1
Windows  
Place the CD-ROM in the computer’s CD-ROM drive  
and click [Easy Installation] when the screen on the left  
appears.  
Follow the on-screen instructions to proceed.  
If the User Account Control window appears, follow the  
on-screen instructions to proceed.  
Proceed with thinstallation to display the screen on the  
left.  
Macintosh  
Place the CD-ROM in the computer’s CD-ROM drive and  
double-click  
.
When the screen on the left appears, click [Install] and  
follow the onscreen instructions to proceed.  
When the installation finishes, click [Finish] to restart the  
computer and complete the installation.  
Prepare SELPHY.  
2
Turn off SELPHY and remove the memory card or USB  
flash memory.  
Insert an ink cassette and a paper cassette that contains  
paper into SELPHY (pp. 8 – 10).  
ꢄ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect SELPHY to the computer.  
3
Use the USB cable to connect SELPHY to the computer.  
Refer to the user guide included with the cable or  
computer for handling instructions.  
Commercially available USB cable  
Turn on SELPHY.  
4
5
Press the  
q
button to turn on SELPHY.  
Windows  
When the installation finishes, click [Restart] to restart the  
computer and complete the installation.  
Confirm that the software has been started  
properly.  
The software will start and the screen on the left will  
appear when a connection between SELPHY and the  
computer is estblished.  
Perform Stps o 4 to automatically start the software  
the nextime ywant to use it.  
Windows  
If the screen in Step 5 oes not apen it from the [Start] menu  
r
[All Programs]  
r
[Canon Utilities]  
[SEPHY Photo Print]  
[SELPHY Photo Print].  
r
r
Macintosh  
If the screen in Step 5 does not appear, follow the procedure below to register your printer.  
After clicking [ ] in the menu, click [System Preferences], then [Print & Fax] to open the [Print  
& Fax] window. Click [+] to select [CP800] from the pop-up window, then click [Add].  
After you have finished registering your printer, click [SELPHY Photo Print] from the Dock (the  
bar at the bottom of the desktop), and the screen in Step 5 will appear.  
SELPHY may not operate correctly if it is connected to a computer via a USB hub.  
SELPHY may not function properly if other USB devices (with the exception of a USB mouse or USB  
keyboard) are used at the same time. Disconnect any other USB devices from your computer and then  
reconnect SELPHY.  
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the  
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without  
disconnecting the USB cable.  
For details on how to awaken the computer, refer to the user guide included with your computer.  
ꢄꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Software to Print  
Use the installed software (SELPHY Photo Print) to print images from your computer.  
The [Simple print] feature will be explained in this section. Using this feature, you can view all your images at  
once and select which ones you want to print. If your computer is equipped with speakers, set the volume so  
that the audio guidance for necessary operations can be heard.  
Display the print menu.  
1
Click [Print menu].  
If printing preparations are not complete (paper cassette  
and ink cassette inserted), you cannot click [Print menu].  
Follow the audio guidance or onscreen instructions to  
perform the necessary operations.  
Select a print method.  
2
Click [Simple print].  
You can make prints with frames, stamps, and speech  
bubbles by clicking [Decoration print].  
You can make prints with calendars added by clicking  
[Calendar print
t aimage.  
3
You can select the conditionf
images to display.  
es will display in an index within the [My Pictures]  
er in Windows, and the [Pictures] folder in Macintosh.  
Click an image to select for printing.  
The background color changes and the  
image is set for printing.  
Use the same procedure to click all images  
you want to print.  
If you click an image again, the background  
color switches back to the original color and  
the settings are canceled.  
Select an image, then click [Next].  
You can display images saved in another folder by  
pressing this button and selecting a folder from the  
screen that appears.  
ꢄ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select the number of prints.  
4
Select the number of copies for each image.  
For Windows, click [Print] to start printing.  
For Macintosh, click [Print menu], then click [Print] in the  
screen that appears.  
Press the - or + buttons to set the  
number of prints.  
End the program.  
Windows  
5
When all printing is finished, click  
at the top right  
corner of the screen.  
Macintosh  
When all prntinis finished, click  
of the screen.  
at the top left corner  
Turning off Audio Guidance  
Audio guidance may not play prperly on smputers. If the audio guidance is difficult to hear,  
follow these steps to turn it off bore usig the software.  
Turning off Audio Guidance  
While in the screen from Step 1 in “Using the Software to  
Print” (p. 25), check the [Off] radio button.  
Audio guidance turns off.  
ꢄꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Digital Camera  
You can select and print images from a digital camera that supports the PictBridge standard.  
A Canon brand compact digital camera will be used as an example to explain the print method. If operations  
are different for the digital camera you use, refer to the user guide included with your digital camera.  
Make sure that a memory card is not inserted  
1
in SELPHY, and it is not connected to a  
computer.  
Connect SELPHY to the digital camera using  
2
the interface cable (USB cable) included with  
the digital camera.  
First turn on SELPHY, then turn on the  
3
digital camera and play back the images  
on the digial amera.  
Depon thdigital camera you use,  
on thal cama’s screen.  
may appear  
rm he necessary operations on your  
l camera to select an image for printing.  
Use the digital camera to start printing.  
4
Printing starts.  
After printing has completed, turn off SELPHY and the  
digital camera, then unplug the cable.  
You cannot stop printing with the  
button. Use the digital camera to stop printing.  
v
PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA). It  
allows you to print images taken with any digital camera or video camera, regardless of the manufacturer  
or model, by connecting to a printer without using a computer.  
ꢄꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Images Using Digital Camera Specified Settings (DPOF Print)  
You can make print settings and select images to print on your digital camera and then print the images all at  
once. For details, refer to the user guide included with your digital camera.  
Insert a memory card containing DPOF  
1
settings into the appropriate memory card slot.  
[DPOF images remain Print images?] appears on the  
screen.  
Label side  
Press the  
utton.  
o
2
3
Ck the settings.  
“Print type” set with the digital camera  
: Index  
: Standard  
Number of sheets required  
[Date] and [File No.] set with the digital camera  
Print.  
4
Press the  
p
button to start printing.  
The date and file number are the DPOF settings made with the digital camera (these settings cannot be  
changed with SELPHY).  
If, on a Canon brand digital camera, the [Print Type] is set to [Standard], the settings made in “Printing a  
Variety of Images” (pp. 17 – 21) will be applied.  
The screen in Step 3 can also be displayed when you press the  
button and select [DPOF  
k
Print], then press the  
button. [DPOF Print] only displays when a memory card is inserted that  
o
contains DPOF information set with the digital camera.  
ꢄꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Battery Pack  
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.  
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.  
* The number of possible prints is based on Canon testing standards, and may change depending on printing  
conditions.  
Installing the Battery  
Remove the battery cover.  
1
Slide and hold the cover lock (), then remove the cover  
towards ().  
Air Vents  
Remove the battery terminal cover.  
2
Attacatter
3
sert tab (), then push the battery () until it clicks  
locinto place.  
Charging the Battery  
Plug in SELPHY (p. 10).  
Charging starts and  
Charging completes after approximately 4 hours. and  
appears on the screen.  
disappears.  
If you press the  
q
button while the battery is charging (p.  
11), SELPHY can be used; however, charging will stop.  
When you turn SELPHY off (p. 11),  
appears and  
charging resumes.  
For cautions concerning the battery, refer to the user guide included with the battery.  
When  
is displayed and you press any button other than the  
button for 3 seconds or  
q
longer,  
will disappear. When the screen is turned off while the battery is charging and you  
button, will appear after approximately 10 seconds.  
If SELPHY is not used for more than five minutes, it will automatically turn off to save power.  
If a red  
appears, the battery has reached the end of its life span. Purchase a new battery.  
press any button other than the  
q
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing From Your Mobile Phone  
Use the Bluetooth unit BU-30 (sold separately) for wireless printing of images taken with a Bluetooth  
equipped mobile phone. For details on how to use the mobile phone or on printing methods via Bluetooth  
refer to the user guide included with the mobile phone.  
Make sure that a memory card is not inserted  
1
in SELPHY, and it is not connected to a  
computer.  
Insert the Bluetooth unit.  
2
Remove the cover attached to BU-30 and insert it as  
shown.  
Turn on SELPHY (p. 11).  
Transfer images from your mobile phone to  
3
SELPHY.  
The Bluetooth t blinks blue during data transfer.  
Prinrts aftdata transfer is complete.  
Up to approx. 10 m (33 ft.)  
During transfer, the blue light othe Blutooth unit will blink. If transfer is interrupted, the unit will stop  
blinking. Follow the instructions dplayd on your mobile phone and try again.  
The following conditions may cause transfer to slow down or fail, even within a 10 m (33 ft.) range:  
- When there is an obstacle between the Bluetooth unit and the mobile phone  
- When there is electromagnetic interference from magnetic fields, static electricity, or radio waves in the  
area  
The maximum file size that can be transferred is 2 – 3 MB (varies depending on mobile phone).  
Data transfer time increases when data size is large. Therefore, the amount of time before printing may  
also increase.  
Depending on the mobile phone model you use, images saved on the memory card may not be printed.  
Depending on the color ink cassette/paper set (p. 2) you use, images may print with the edges cut off.  
Select Canon CP800 (XX:XX:XX) (X stands for one digit) when selecting a target device name on your  
mobile phone.  
You cannot establish a wireless connection between a computer and SELPHY.  
Movies, e-mail, address book information, or images attached to an e-mail or downloaded from the  
Internet cannot be printed.  
SELPHY automatically sets the print orientation.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you think there is a problem with SELPHY, first check the following. If the items below do not solve your  
problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.  
Power  
Power will not turn on  
• Make sure the plug is correctly connected (p. 10).  
• Hold the  
button pressed until the start-up image appears on the screen (p. 11).  
q
• When using a battery (sold separately), use a fully charged battery (p. 29).  
Printing Problems  
Cannot print  
• Make sure SELPHY is turned on (p. 11).  
• Make sure that the ink and paper cassettes are correctly inserted (p. 10).  
• When the ink is spent, replace the ink cassette with a new one. When the paper is spent, refill the paper  
cassette with new paper (p. 14).  
• Make sure you are using the correct combination of paper, paper cassette and ink cassette (p. 8).  
• Connect SELPHY to only one device at a time. If SELPHY is connected simultaneously to a digital  
camera, computer and has a memory card inserted, you may nt be able to print properly.  
• Make sure there is no slack in the ink sheet (p. 8).  
• Make sure that you are using dedicated paper (p. 9
• Depending on the room temperature, SELPHY may eat and emporarily stop operating. This is  
not a malfunction. Wait until the temperatuanprinting resumes. If SELPHY is connected to  
a computer, a message will appear on the scren. Do not cancel the print. Wait until printing  
resumes.  
Cannot display/print images from memory card or USB flash memory  
•
Make sure the memory card is insertd all e way into the correct slot with the label facing upward  
(pp. 12, 13).  
• Make sure the USB flash memory is inserted all the way, in the correct direction (p. 14).  
• Make sure you are using a supported image type (p. 12).  
• Make sure that any memory card requiring an adapter is inserted into the adapter before being inserted  
into the slot (p. 12).  
Printing from digital cameras  
• Make sure your digital camera supports PictBridge (p. 27).  
• Make sure SELPHY and the digital camera are connected correctly (p. 27).  
• Make sure the battery/batteries in your digital camera are not depleted. If there is insufficient charge,  
replace the battery with a fully charged one, or new batteries.  
Printing from computers  
• Make sure you installed the software according to the correct procedure (p. 23).  
• Make sure SELPHY is connected directly to a port on the computer with the USB cable (p. 24).  
• Problems Exclusive to Windows: Make sure the printer is not set to offline.  
If it is, right-click the printer icon and cancel the offline setting.  
• Problems Exclusive to Macintosh: Make sure SELPHY is registered on the Printer List (p. 24).  
Cannot print the date  
Printing from memory cards or USB flash memory  
• Make sure the date imprint option is set (p. 28).  
If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the  
DPOF settings.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing from mobile phones  
• The date cannot be imprinted on images sent from a mobile phone (p. 30).  
Printing from digital cameras  
• Make sure the date setting in your digital camera is set to [On]. However, if the setting is [Default], the  
date imprint settings of SELPHY will be used.  
Cannot make clean prints  
• Make sure the ink sheet and paper are not dusty.  
• Make sure there is no dust stuck on the inside surfaces of SELPHY (p. 34).  
• Make sure no condensation has formed on the inside surfaces of SELPHY (p. 34).  
• Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong magnetic  
field (p. 5).  
Colors on the computer display and the print are different  
• Color generation methods are different with computer screens and printers. Moreover, the variance may  
be attributable to the environment in which the screen is viewed (color and strength of the light), or to the  
screen’s color adjustment settings.  
After using the computer to cancel a print in progress, an image that had already been printed was  
printed again when printing resumed  
• When you restart printing on a Macintosh computer after canceling, an already printed image may print  
again when printing resumes.  
Paper Problems  
Paper will not fit into cassette  
• Make sure the paper size matches the size of the paper caset(p. 2).  
Paper is not feeding properly/frequent paper jams  
• Make sure the paper and paper cassette are correcrted (p8, 10).  
• Make sure there are less than 19 sheets in sse
• Make sure 19 or more sheets have not colthe uter lid of the paper cassette.  
• Make sure that you are using dedated pap
Cannot print the specified number printspaper left over  
• Canceling a print in progress or pullig on he ink sheet will consume ink. If paper runs out while printing  
many images, do not remove the ink cassette, as this will consume ink. Instead, refill the paper without  
removing the ink cassette.  
Paper is jammed  
• If the paper is sticking out from the front or back (paper ejection slot) (p. 6) of SELPHY, gently tug on  
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to  
forcibly pull it out. Turn the printer off and on repeatedly until the paper is ejected.  
Error Messages  
If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with the error  
message, follow the on-screen instructions. If no solution displays, refer to “Troubleshooting” (p. 31).  
If these items do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included  
customer support list.  
If a problem occurs while SELPHY is connected to a digital camera, an error message may appear on  
screen of the digital camera.  
3ꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
SELPHY CP800  
Printing Method  
Dye-sublimation thermal transfer (with overcoating)  
Resolution/Color  
Representation  
300 x 300 dpi  
YMC (256 shades per color, 16.77 million colors per dot (max))  
(Resolution based on the “area intensity method” is equivalent to a 4800 x 4800  
dpi color representation)*1  
Ink  
Dedicated color ink cassette (Y/M/C/overcoating)  
Paper  
Postcard Size, L Size, Card Size (including full page label sheets, 8-label  
sheets)  
Print Size  
Borderless  
Bordered  
Postcard Size  
L Size  
100.0 x 148.0 mm (3.94 x 5.83 in.)  
89.0 x 119.0 mm (3.50 x 4.69 in.)  
54.0 x 86.0 mm (2.13 x 3.39 in.)  
22.0 x 17.3 mm (0.87 x 0.68 in.)  
91.4 x 121.9 mm (3.60 x 4.80 in.)  
79.2 x 105.3 mm (3.12 x 4.15 in.)  
50.0 x 66.7 mm (1.97 x 2.63 in.)  
Card Size  
(per label)  
Printing Speed*2  
Printing from memory cards/USB flash memory/Connected to cameras  
(PictBridge)  
Postcard Size  
L Size  
Card Size  
Approx. 47 sec.  
Approx. 39 sec.  
Approx. 24 sec.  
Feeding System  
Ejection System  
Screen  
Automatic paper feed from papeaette  
Automatic paper ejectiop of paer cassette  
Tilt-up, 2.5 type, TFT LCMonitor  
Interface  
USB  
Conneito e compliant device: USB compliant Type A connector  
Concting to a er: USB compliant Type B connector  
Wireless  
Bluetth*3  
Memory Cards  
CF (Comaclash) Card, Microdrive, xD-Picture Card*4, SD Memory Card,  
SDHC Memory Card, SDXC Memory Card, MultiMediaCard, MMCplus Card,  
HC MMCplus Card, miniSD Memory Card*4, miniSDHC Memory Card*4,  
microSD Memory Card*4, microSDHC Memory Card*4, microSDXC Memory  
Card*4, RS-MMC Card*4, MMCmobile Card*4, MMCmicro Card, Memory Stick,  
Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo, Memory Stick  
micro*4  
USB Flash Memory  
Operating Temperatures  
Operating Humidity  
Power Source  
FAT/exFAT only supported  
5 – 40 °C (41 – 104 °F)  
20 – 80 %  
Compact Power Adapter CA-CP200 W  
Battery pack NB-CP2L (sold separately)  
Power Consumption  
Dimensions  
60 W or less (4 W or less on standby)  
177.0 x 134.6 x 68.8 mm (6.97 x 5.30 x 2.71 in.)  
Approx. 940 g (approx. 33.2 oz.)  
Weight (printer only)  
1
*
The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per  
dot. In comparison, printers using the area intensity method represent shades by the number of dots printed in  
a unit of area, i.e. 256 dots (16 dots vertical x 16 dots horizontal) are needed to represent the same 256 shades  
of color. SELPHY’s color representation is therefore equivalent to a 4800 x 4800 dpi resolution based on an area  
intensity method.  
• Gradation refers to the number of shades that can be represented on a print. For example, black and white  
has two gradations, while 256 gradations include the shades of gray going from white to black that can be  
represented.  
• “dpi” refers to the number of dots that can be printed in 1 inch (“dots per inch”).  
Measured from start of the yellow printing pass to final output.  
2
3
4
*
*
*
Bluetooth unit BU-30 (sold separately) is required.  
Dedicated adapter (commercially available) is required.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compact Power Adapter CA-CP200 W  
Rated Input  
100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)  
Rated Output  
24 V DC, 2.2 A  
Operating Temperatures  
Weight  
0 – 40 °C (32 – 104 °F)  
Approx. 310 g (10.9 oz.)  
Battery Pack NB-CP2L (Sold Separately)  
Type  
Rechargeable lithium-ion battery  
Nominal Voltage  
Nominal Capacity  
Battery Life (Charge Cycles)  
Operating Temperatures  
Dimensions  
22.2 V DC  
1200 mAh  
Approx. 300 times  
5 – 40 °C (41 – 104 °F)  
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)  
Approx. 230 g (8.11 oz.)  
Weight  
All data is based on tests by Canon.  
Printer specifications or appearance are subject to change without notice.  
Handling Precautions  
Do not subject the printer to excessive force. Force or impact on he printer may result in paper jams or  
equipment damage.  
Be careful not to spray the equipment with insecticidether vatile substances. In addition, do not  
store the equipment in contact with rubber or vinyl pror long periods of time. This may cause  
deterioration of the casing.  
Depending on the room temperature, SELPvereat and temporarily stop operating. This is not a  
malfunction. SELPHY will resume nmprioon as it cools down. Temporary stoppages increase  
printing time and are most likely to ccur when g continuously, if a room is unusually warm, or if the  
air vents on the back of SELPHY arblockeand internal temperature is high.  
Avoid condensation on SELPHY when movg it from a cold to a warm place by putting it in an airtight,  
sealable plastic bag and allowing for adjustment to temperature changes gradually before removing from  
the bag. In the event that condensation does form within SELPHY, keep it at room temperature until the  
water droplets evaporate naturally before use.  
When SELPHY becomes dirty, wipe the casing with a soft dry cloth.  
When dust or dirt has accumulated on the battery cover or vents (pp. 6, 29), be sure to remove the ink  
cassette (p. 14) before cleaning. If dust gets in through the vents, the printer may not print cleanly.  
Never wipe using volatile solvents such as benzine, paint thinner, or diluted neutral solvent. They may cause  
deformation or peeling of the casing.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademark Acknowledgments  
SDXC Logo is a trademark of SD-3C, LLC.  
This device incorporates exFAT technology licensed from Microsoft.  
Portions of the code used in this firmware are based in part on the work of the Independent JPEG  
Group.  
About This Guide  
Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission  
of Canon is prohibited.  
Canon reserves the right to change the contents of this guide at any time without prior notice.  
Illustrations and screenshots in this guide may differ slightly from the actual equipment.  
The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation  
of the products.  
This product is designed to achieve excellent performance when used with genuine Canon  
accessories. Canon shall not be liable for any damage to this product and/or accidents such as  
fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or  
explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of  
the malfunction of non-genuine Canon accessories, although you may request such repairs on a  
chargeable basis.  
CDP-E461-010  
© CANON INC. 2011  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box Switch Blackbox ServTray User Manual
Blanco Oven Bose 65 User Manual
Breezaire Fan RPX900D User Manual
Butler Coffee Grinder 645 141 User Manual
Campbell Hausfeld Sander FHT504 User Manual
Carrier Camper 48TFD008 014 User Manual
CDA Refrigerator FW950 User Manual
Channel Vision Network Card IR 4101 User Manual
Char Broil Charcoal Grill 463620410 User Manual
Christie Digital Systems Projector LW300 User Manual