HSW44C
4x4 HDMI Matrix Switch
with CAT5 Output
Instruction Manual
Made in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
The HSW44C 4x4 HDMI Matrix Switch with CAT5 Output provides the most flexible and cost effective solution
in the market to route high definition video sources plus multi-channel (up to 7.1-channel) digital audio from any
of the four HDMI sources to the remote displays at the same time. Through low cost CAT5/5e/6 LAN cables, not
only high quality video and audio can be transmitted to the display sites, but also users can switch among 4 HDMI
sources using the push button or remote control. With single power design at the source site, each remote
module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at
display site access the DVD player, PS3 or any HDMI equipped devices directly!
4x HDMI Source
Two LAN cables
PS3
4x HDTV
HDMI cable
HSMR
IR receiver
Blu- ray Disc Player
HSMR
TiVo
HSMR
HDMI Camera
HSMR
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
ꢀ State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability
ꢀ HDMI 1.2a/1.3c* compliant
*
HDMI 1.2a for HSW44C v1.2
HDMI 1.3c for HSW44C v1.3
ꢀ HDCP compliant
ꢀ Allows any source to be displayed on multiple displays at the same time
ꢀ Allows any HDMI display to view any HDMI source at any time
ꢀ Supports 7.1 channel digital audio
ꢀ Supports default HDMI EDID and learns the EDID of displays
ꢀ The matrix master can switch every output channels to any HDMI inputs by push button, IR remote control,
or RS-232 control
ꢀ Allows controlling local HDMI sources such as DVD and TiVo by IR extender through control path at remote
receiver
ꢀ Allows to control main matrix center through control line at remote receiver
ꢀ Extends video signal up to 115 feet (35m) over CAT5e at 1080p
ꢀ Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively
Specifications & Package Contents
Model Name
Technical
Role of usage
HSW44C v1.2 / HSW44C v1.3
HSW44C
HSMR
Receiver [RX]
4x4 matrix switch & transmitter [TX]
[HSW44C v1.2] – HDMI 1.2a
[HSW44C v1.3] – HDMI 1.3c
HDMI compliance
HDCP compliance
Yes
[HSW44C v1.2] – Single-link 165MHz [4.95Gbps]
[HSW44C v1.3] – Single-link 340MHz [6.75Gbps]
Video bandwidth
Video support
Audio support
480i / 480p / 720p / 1080i / 1080p60
Surround sound (up to 7.1ch) or stereo digital audio
Full HD (1080p): 115ft (35m) [CAT5e] / 130ft (40m) [CAT6]
HD (720p/1080i): 165ft (50m) [CAT5e] / 180ft (55m) [CAT6]
Transmission
Equalization
N/A
8-level digital control
Input TMDS signal
Input DDC signal
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
[2] Core chipset — ±8kV
ESD protection
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PCB stack-up
Input
4-layer board [impedance control — differential 100Ω; single 50Ω]
1x RJ-45 TMDS
1x RJ-45 DDC
4x HDMI
1x RS-232
1x IR socket for IR receiver
4x RJ-45 TMDS
4x RJ-45 DDC
Output
1x HDMI
5x IR socket for IR emitter
HDMI Input selection
HDMI source control
IR remote control
HDMI connector
Push button / IR remote / RS-232
Push button / IR remote
Controllable through IR control path from IR receiver at receiver sites
Electro-optical characteristics: τ = 25° / Carrier frequency: 38kHz
Type A [19-pin female]
RJ-45 connector
RS-232 connector
WE/SS 8P8C with 2 LED indicators [TMDS & DDC channels]
DE-9 [9-pin D-sub female]
Earphone jack for IR emitter cable
Earphone jack for IR receiver cable
[IR Main] All sources IR control
[IR] Receives IR control
3.5mm connector
[IR1~IR4] Individual channel IR control
DIP switch
[SW1~SW4] 2-pin for EDID, audio mode & safe mode
[SW Main] 4-pin operation mode & firmware update
[for MA-5144 only]
Mechanical
Housing
HSW44C
HSMR
Metal case
1’1.4”x4.3”x1.7” [340 x 110 x 44mm]
Model
Dimensions
Package
3.3”x3.5”x1” [85 x 90 x 25mm]
1’9.5”x9.1”x4.3” [545 x 230 x 110mm]
1’10.5”x1’10.9”x10.2” [570 x 580 x 260mm]
(L x W x H)
Carton
Model
Package
2.7 lbs [1220g]
6.3 oz [180g]
Weight
7.0 lbs [3.2 kg]
1U rack-mount with ears
Wall hanging holes
5V 6A DC
Fixedness
Wall-mount with screws
Not necessarily required1
Power supply
Power consumption
Operation temperature
Storage temperature
Relative humidity
20 Watts [max]
1 Watt [max] (provided by HSW44C)
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HSW44C
4x HSMR
4x IR receiver cable
1x IR emitter cable2
Package Contents
2x Rack-mounting ears
8x Wall-mounting screws
1x 5V 6A power adapter
1x IR remote2
1x User Manual
1The HSMR has been tested extensively and found that it doesn’t require external power supply.
If in rare situation you find it cannot work with the HSW44C, please use any +5V power
adapter to plug in the power jack and see if it can work. If not, please contact your technical
support for further service.
2 Additional IR remote control and IR emitter cable can be purchased as optional accessories to
control the HDMI sources located separately.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Panel Descriptions
HSW44C
3
6
5
4
6
5
4
6
5
4
6
5
4
3
2
1
1. Power: Power indicator LED
2. IR: IR receiver
3. Input: Input source indicator LED
4. HP1–HP4: Connection status indicator LED for each output channel
5. Port1–Port4: Input source channels mapping LED for each output channel
6. Port1 Select–Port4 Select: Push button for selecting input channel
13
14
11 13
15
13
12
12
11 13
8
9
10
7
7. ON–OFF: Power ON/OFF
8. RS-232: RS-232 control port
9. +5V DC: 5V DC power jack
10. SW Main: DIP switches [see DIP Switch section in p.8]
11. SW1–SW4: DIP switch [see DIP Switch section in p.7]
12. IN1–IN4: HDMI inputs
13. IR1–IR4: IR extender jacks for individual HDMI source control
14. OUT1–OUT4: RJ-45 TMDS/DDC outputs for each output channel
15. IR Main: IR extender jack for all HDMI source control [default socket for IR emitter]
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HSMR
1
2
3
8
4
7
6
5
1. Source LED: Indicate input source
2. IN: Push button for switching input source channel in sequential order
3. EQ: Adjust the 8-level equalization control for HDMI signals. 0 – 7 = strongest – weakest. It is
recommended to switch from 7 to 0 to find the optimal visual experience.
4. HDMI Out: Connect to HDTV with a HDMI cable
5. IR: Plug in IR receiver cable
6. 5V DC power jack [optional
*]
7. RJ-45 Input: TMDS channel [connect to TMDS channel of OUT1 to OUT4 on HSW44C]
8. RJ-45 Input: DDC channel [connect to DDC channel of OUT1 to OUT4 on HSW44C]
*
The HSMR has been tested extensively and found that it doesn’t require external power supply.
If in rare situation you find it cannot work with the HSW44C, please use any +5V power
adapter to plug in the power jack and see if it can work. If not, please contact your technical
support for further service.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SW1-SW4 for EDID/Audio
DIP Switch Position
Video
Audio
Description
Pin#1
Pin#2
Up to
1080p
Default Mode2 – Up to 1080p & stereo audio output for most
HDTVs
OFF [ꢀ] OFF [ꢀ]
OFF [ꢀ] ON [ꢁ]
ON [ꢁ] OFF [ꢀ]
Stereo1
Up to 720p
/ 1080i
Safe Mode3 – Enforce the system output at 720p/1080i video
and stereo audio for basic compatibility among HDTVs
Stereo
Bypass4
Stereo
EDID Learning Mode5 – for learning EDID from the display
while playing any received HDMI audio format
EDID Learning & Stereo Mode5 – for learning EDID from the
display while enforcing stereo output if any HDTV cannot play
surround sound normally
Bypass4
Bypass
ON [ꢁ]
ON [ꢁ]
Note
1 If the HDTV shows video but without audio, please try to set audio mode to stereo.
2Factory default of SW1-SW4: Pin#1-OFF [ꢀ] & Pin#2- OFF [ꢀ] for 1080p with stereo.
3If you encounter any unsolved audio/video output problem during system installation, please
turn any SW1-SW4 to Pin#1-OFF[ꢀ] & Pin#1-ON[ꢁ], for safe mode to enforce the most
compatible 720p stereo output for system check. However, the safe mode cannot be initiated if
your HDMI source is set to enforce 1080p output. In this case, please reconfigure your HDMI
source to all resolution output for troubleshooting.
4Bypass means the matrix will maintain playing the original format of HDMI signals in video
and perhaps audio. By setting at this mode, the users may encounter compatibility issue
among different kinds of HDMI sources and displays. If you cannot get the audio and/or
video output normally at the system installation, please change the DIP switch setting to
default mode or even safe mode to verify the functionality of the device.
5 Set Pin#1 at ON[ꢁ] first then connect the HDMI Input to HDTV through a HDMI cable. Wait
for 20 seconds. The EDID learning procedure will be finished. If you want to learn the EDID
from another HDTV, you must set Pin#1 at OFF[ꢀ] first and repeat this procedure.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SW Main for firmware update (for technical support only)
DIP Switch Position
Pin#1
Pin#2
Pin#3
Pin#4
Normal Operation Mode6
OFF [ꢀ] OFF [ꢀ] ON [ꢁ]
OFF [ꢀ]
Firmware Update Mode7
ON [ꢁ]
ON [ꢁ]
OFF [ꢀ]
OFF [ꢀ]
Note
6 Factory default for SW Main: Pin#1-OFF [ꢀ], Pin#2-OFF[ꢀ], Pin#3-ON [ꢁ], Pin#4-OFF[ꢀ].
PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE!
7Sequence for firmware update
[1]. Power off the HSW44C.
[2]. Set the DIP switch position to Firmware Update Mode.
[3]. Power on the HSW44C.
[4]. Power off the HSW44C.
[5]. Set the DIP switch position to Normal Operation Mode.
[6]. Power on the HSW44C.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IR Extender
IR Cables
IR Emitter Cable
IR Receiver Cable
IR Sockets
HSW44C
IR Main: The default location for IR emitter extension cable to transmit all IR command signals received from any
of the four remote receivers to all of the HDMI sources.
IR1: IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 1.
IR2: IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 2.
IR3: IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 3.
IR4: IR emitter extension cable connected here can only transmit IR command signals from the remote receivers
that are setting at the input channel 4.
HSMR
IR: IR receiver cable connected here can receive all IR command signals from the IR remote controls of HSW44C
and all other HDMI source machines.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Definition of IR Earphone Jack
IR Emitter
IR Receiver
You can buy any IR extension cables in the market that are compatible to the definition of the
IR sockets for the matrix if necessary for replacement use.
Supported IR Data Format
Data Format
Suitable
Not Recommended
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
NEC
RC5
TOSHIBA MICOM CODE
GRUNDIG CODE
SONY 12 BIT CODE
SONY 15 BIT CODE
SONY 20 BIT CODE
RCA CODE
ꢀ
ꢀ
ꢀ
RCM CODE
MATSUSHITA CODE
MITSUBISHI CODE
ZENITH CODE
JVC CODE
M50560-001P
MN6125H
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MN6125L
MN6014_C5D7
MN6014-C6D6
MC14457P
LC7464(AHEA)
GEMINI_CM
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation
HSW44C as master
1. Connect all sources to HDMI Inputs on the HSW44C 4x4 HDMI matrix switch with CAT5 output.
2. Connect each DDC output on the HSW44C to respective DDC input on the remote receiver HSMR.
3. Connect each TMDS output on the HSW44C to respective TMDS input on the remote receiver HSMR.
4. Connect IR emitter cable(s) to the HSW44C and direct the IR emitter(s) to the build-in IR receiver of the
HDMI sources.
5. Connect the +5V 6A DC power supply to the HSW44C.
6. Power on all HDMI sources.
7. Power on the HSW44C.
HSMR as receiver
1. Connect each HDMI output to HDMI displays.
2. Connect the TMDS input on the HSMR to the TMDS output on the HSW44C.
3. Connect the DDC input on the HSMR to the DDC output on the HSW44C.
4. Connect IR receiver cable and place the IR receiver at the appropriate position that can receive the IR signals
sent from the users.
5. Use rotary control to adjust the EQ until the picture and sound are clear. It is recommended to switch from 7
to 0 to find the optimal visual experience.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation and IR Control
Source Side
Method A: Push Button
Push the switch button on the front panel, the source will be sequentially changed.
Method B: IR Remote Control
a. Please press
to enter IR control mode
Note
If HSW44C receives the IR commands, the LED will flash. If not, try again.
b. Decide which output port to be controlled by pressing F1 to F4
Note
If the setting is correct, the corresponding LED will flash. If not, please press output port select button or repeat
step (a) and (b).
F1
F2
F3
F4
HDMI output #1
HDMI output #2
HDMI output #3
HDMI output #4
c. Use
Note
or
keys to select input source.
If the setting is correct, the corresponding LED will flash. If there is no
response, please wait until the LED stops flashing, and try again.
Left button to switch channels in ascending order (1, 2, 3, 4, 1, ...)
Right button to switch channels in descending order (1, 4, 3, 2, 1, …)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Side
Method A: Push button
Push the switch buttons of respective output channels then the output channel will switch from HDMI source 1
to source 4 in sequential order.
Method B1: IR remote control for switching input channels
Channel select switch must be set to zero.
a. Press Power on button to enable IR control function.
Note
If HSMR receives the IR command, the LED will flash. If not, try it again.
b. Press hot key for input source:
F1
F2
HDMI source #1
HDMI source #2
F3
F4
HDMI source #3
HDMI source #4
Method B2: IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control respective DVD player or any HDMI compliant
devices including HSW44C itself with IR control at any display site.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 Serial Port Control
Method C: Software Control through RS-232
1
2
3
4
6
5
Scan: Push this button will trigger the automatic search over all the available COM ports (1-255). If the
matrix is detected, the message window below will show up.
1
Otherwise, an error message shows up to indicate no legal device can be found. Notice that
successful connection is only established if there exists at least one available COM port.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Open: Open the COM port after scan to establish the connection between PC and the matrix.
Close: Release the COM port after scan.
2
3
4
Quick Setup Buttons: Provide the fast setup between inputs and outputs of the matrix. “Default” button
makes input 1, 2, 3, 4 mapped to output 1, 2, 3, 4 respectively. “Channel 1” makes all outputs see
input-1, same for the remaining buttons.
5
6
Output Channel Setup: Click on this button, a quick selection table of inputs will show up. Users can
therefore easily select the input video for each output.
Input Channel Setup: The button will bring up the setup window for the inputs as below.
A
B
C
A
Input Channel: Select the input channel to do bitmap and label change.
Bitmap Path: Select the figure for each channel. Notice that only pictures in BMP format are supported.
Description: Channel description.
B
C
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 transmission Format
Baud rate: 9600
Data bit:
Parity:
8
None
Set Command
Command Code
Data
0x08 0x4d 0x41 0x51 0x44 0x05 *0x01~0xff
0x0c 0x4d 0x41 0x51 0x44
Device_Id 0x02 port1 port2 port3 port4
Response
ACK
0xaa
Description
SET
SET MA-5144 Device ID
Set MA-5144 Source
Mapping of Output Port
Check SUM
0x31~0x2f
0x0c+…+port4
0xaa
Status Command
Command Code
Response
Description
Check
SUM
Data
Get Status
Check SUM Status
Get Device Type
0xaa 0x06 0x4d 0x41
0x51 0x44
0x05 0x4d 0x4f 0x44
0xe5
0x29
(MA-5144)
0x07 0x4d 0x41 0x53 0x57
0x04
0x43
0xaa 0x3 0x01~0xff
0x04~0x02 Get Device ID
0x08 0x4d 0x41 0x51 0x44
*0x01~0xFF 0x01
0x08 0x4d 0x41 0x51 0x44
*0x01~0xFF 0x04
0xaa 0x06 port1 port2
port3 port4
0xaa 0x08 0x56 0x33
0x2e 0x30 0x31 0x61
0x06 +
Get Source Mapping of
0x2e~0x2c
0x30~0x2e
port1~port4 Output Port
0x81
Software Version V.3.01a
Check sum:
Check sum = (Data value sum)%256 The check sum of response is not included 0xaa.
0x01 ~ 0xFF:
This data is device ID. The Device ID saved in the device, if the device ID of the controlled device is 0xff , the
device will ignore its own ID and carry out the commands.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
There could be unexpected consequences resulted from inappropriate firmware update
operation. Please do it with caution.
1. Please unzip the Matrix_Firmware_Update.zip into your designated folder.
2. Please turn off the power of the HSW44C and set DIP location of [SW Main] at Pin#1-ON(ꢁ), Pin#2-ON(ꢁ),
Pin#3-OFF(ꢀ), & Pin#4-OFF(ꢀ).
3. Please execute the file Matrix_Firmware_Update.exe
4. In the pop-up window, at [Select Chip], please select W78E365.
5. In the pop-up window, at [Select File], please choose the BIN file in the designated folder, as shown in the
picture.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. In the pop-up window, please select the [File Format] to Binary.
7. Please make sure your PC has direct connection to the RS-232 port of the HSW44C, as shown in the picture
(left), that in [Communication Setting] the onlne status should be “Wait to connect”. If the RS-232 connection
is not firmly established, you will see the online status is “Disconnect.” If so, please check the RS-232
connection until the online status becomes “Wait to Connect.”
8. Please turn on the HSW44C. The firmware update process will automatically initiate. If nothing happens,
please turn off and turn on the HSW44C again to initiate the automatic firmware update.
9. The firmware update process is successful if you see the [Information] window pops up to inform you that
the process is complete. If you see the [Error] window pops up, please turn off the HSW44C and turn it on
again. If necessary, please redo the whole sequences 1-9.
10. The message “Program: OK!” means the firmware update process is successful. If you see the [Error]
window pops up after the message [Program: OK!], please ignore it.
11. Turn off HSW44C. Set DIP location of [SW Main] at Pin#1-OFF(ꢀ), Pin#2-OFF(ꢀ), Pin#3-ON(ꢁ), &
Pin#4-OFF(ꢀ).
12. Turn the HSW44C back on and return to normal operation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and
provide DVI/HDMI EDID information.
2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and
ASTRODESIGN Video Signal Generator VG-859C.
3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type
of HDMI display. The testing result shows solid LAN cables (usually in bulk cable 300m/1000ft form) can
transmit a lot longer signals than stranded LAN cables (usually in patch cord form). Shielded STP cables are
better suit than unshielded UTP cables. A solid UTP CAT5e cable shows longer transmission length than
stranded STP CAT6 cable. For long extension users, solid LAN cables are your only choice.
4. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.
5. To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use shielded
LAN cables to improve EMI problems, which is worsen in long transmission.
6. Because the quality of the LAN cables has the major effects in how long transmission distance will be made
and how good is the received display, the actual transmission length is subject to your LAN cables. For
resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.
7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input [HDMI input #1] generally
can produce better transmission performance among all HDMI inputs.
8. The HSMR has been tested extensively and found that it doesn’t require external power supply. If in rare
situation you find it cannot work with the HSW44C, please use any +5V power adapter to plug in the power
jack and see if it can work. If not, please contact your technical support for further service.
9. Additional IR remote controls and IR emitter cables can be purchased as optional accessories to control the
HDMI sources located separately.
Performance Guide for HDMI over LAN Cable Transmission
Performance rating
Type of LAN cable
Wiring
Shielding
CAT5
ꢁꢁꢁ
ꢁꢁꢁ
ꢁ
CAT5e
ꢁꢁꢁꢁ
ꢁꢁꢁ
ꢁꢁ
CAT6
ꢁꢁꢁꢁꢁ
ꢁꢁꢁꢁ
ꢁꢁ
Unshielded (UTP)
Shielded (STP)
Unshielded (UTP)
Shielded (STP)
Solid
Stranded
ꢁ
ꢁꢁ
ꢁ
Termination
Please use EIA/TIA-568-B termination (T568B) at any time
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal
use and service, for a period of one year from the purchase by the original purchaser. If this product is defective
or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time. No
expressed or implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect,
improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or
modification.
Thank you for your purchase.
We appreciate your business. Please contact us with any questions or comments.
CE labs/Cable Electronics
3209 Wood Drive
Garland, TX75041
Toll Free: 800.767.6189
Fax: 469.429.9205
Email: [email protected]
Website: www.celabs.net
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|