C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
PX412S
4 x 4 Matrix
Switch Module
The
PX412S
provides
16
independent latching DPST
switches configured as a 4 x 4
matrix. These two wire switches
have maskable interrupts that occur
when the requested relay
movements have been made. The
module also has a FIFO for storing
up to eight relay operations. This
module is useful when instrument
matrix switching is needed in your
system.
This unit also features a position for
adding one single-wide M-Module.
CPCI/PXI Compliance
Specifications:
Complies with PCI spec. 2.0 R3.0
and PCI spec 2.2
Inputs:
AC Characteristics:
Maximum Voltage (terminal to
terminal or chassis) **
Bandwidth (-3dB) : >10 MHz (typ)
Crosstalk (typical)
5V and 3.3V signaling voltage (VIO)
supported
DC:
AC rms:
AC peak:
60V / 200V
48V / 125V
68V / 175V
5V only power supply
33MHz PCI data bus
<100 KHz:
<1 MHz
<10 MHz
<-64 dB
<-44 dB
<-24 dB
Maximum Current (non-inductive)
Per Switch/Per Module:
Five trigger lines compliant with PXI
Specification 2.1
Closed channel capacitance:
DC:
AC peak:
2A / 8A
2A / 8A
Hi-Lo:
Hi-Chassis:
Lo-Chassis:
<40 pF (typical)
<60 pF (typical)
<60 pF (typical)
Form Factor: 3U
Maximum Power Per Switch/Per
Module:
Applications
Typical Relay Life at Rated Load:
• LF Signal Switching
DC:
AC:
50W / 200W
50VA / 200VA
10E5 operations
• Instrument Matrix with Kelvin
switching
Time to close or open:
Connectors:
8 ms
DC Characteristics**:
Thermal Offset:
44 pin DSUB
(female)
<3_V (typical)
<0.3_
Ordering Information
Contact Resistance:
Temperature:
Part Number
11030190-0001
Insulation Resistance:
10E8_
Operating:
0°C to 55°C
Storage:
-40°C to 75°C
** See manual for conditions
Additional Information
User Manuals for C&H carriers and
this module can be found on our
Power:
+5V @ 0.6 A
Download from Www.Somanuals.com. All Manuals Search And Download.
|