BROTHER
EMBROIDERY
SYSTEMS
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOMATIC LUBRICATION SYSTEM
Brother’s unique wick oiling system significantly reduces machine maintenance
downtime. Oil is poured into a conveniently located reservoir on the machine, and a
wick that is threaded through the internal workings of the sewing head delivers oil
when and where it is needed, eliminating the time-consuming task of oiling
numerous hard-to-reach locations.
SINGLE CAM-DRIVEN PRESSER FOOT
Developed by Brother, the cam-driven presser foot allows the machine to run faster and
quieter. The precise movement of the cam reacts faster than the previous spring-loaded
technology and reduces the noisy pounding of the presser foot on the throat plate. The
single presser foot also facilitates increased machine speed and less maintenance.
JUMBO BOBBIN
Maximize system productivity with fewer bobbin changes with the larger capacity,
jumbo “M” style bobbins. Brother perfected the performance of the jumbo bobbin by
designing the cams and gears inside the sewing head to accommodate the longer
rotation of the larger bobbin.
EASY-TO-USE CONTROL PANEL
Start sewing faster with the simple, logical commands found on the control panel. For
example, the hoop feed button moves the pantograph out from under the needles for
trouble-free applique placement and easier loading and unloading of hoops.
MEMORY RETENTION
Resume stitching a partially complete design after the machine has been turned off,
unplugged, or even after power failure. Shut the machine off to work with a customer,
go home for the evening, or even move the machine across town and never lose a
stitch or go off registration
another Brother first.
—
INDIVIDUAL CAP FRAME ADJUSTMENT
Adjust the center point of the cap on each head independently while it’s in the frame
and mounted on the machine. Eliminate off-center designs and time-consuming
framing adjustments with this advanced cap frame driver design.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPECIFICATIONS:
• Machine type: Single-head cylinder arm
• Number of needles: 9/12
• Maximum sewing speed: 1,200 spm
• Network capability: Connect multiple machines to
one computer for networking
• Stitch length: (0.1mm – 12.7mm)
• Rotary hook: Jumbo “M” style bobbin
• Maximum field size for: X-axis “width” Y-axis “height”
• Flat:
• Tubular:
• Border:
450mm 300mm
450mm 300mm
450mm 300mm
• Wide area caps: 360mm 85mm
• Power source/consumption: Single phase 120V,
220V, 230V, 240V
• Dimensions:At delivery: 34”(W) x 29”(L) x 55”(H)
• After setup: 41”(W) x 40”(L) x 58”(H)
• Weight: 195 kg. / 430 lbs.
Computer control type
To 4 units
Computer monitor
Stand-alone type
N/A
Number of units connected
to computer
Display
Operation panel display
QUICK-CHANGE
FLAT FRAME AND
TUBULAR FRAME HOLDER
Two-piece tubular frame holder
REMOVABLE TABLE TOP
The table provides additional
support when stitching flat goods
such as towels or blankets.
allows for quick and easy conversion
from small to large tubular frames.
Frame holder can be adjusted to
accommodate a wide range of frame
sizes, from large jacket back frames
to small sock and pocket frames.
QUICK-CHANGE CAP
FRAME (optional)
BORDER (SASH)
FRAME (optional)
Frame for sewing unfinished
goods for patches or all-over
embroidery patterns.
All-in-one cap driver and frame
assembly allows for quick and easy
conversion from sewing caps to flat
or tubulargoods, again minimizing
machine downtime. Sew designs
from “ear to ear” with the wide-area
270-degree frames.
©2007 BROTHER INTERNATIONAL CORPORATION
100 Somerset Corporate Blvd., Bridgewater, NJ 08807 Industrial Embroidery Machines: 1-800-432-3532, Fax: 1-908-575-3810,
Download from Www.Somanuals.com. All Manuals Search And Download.
|