Brinkmann Gas Grill ProSeries 6418 User Manual

Heavy-Duty  
Gas Grill  
6418  
OWNER’S MANUAL  
ASSEMBLY AND OPERATING INSTRUCTIONS  
SAVE THIS MANUAL FOR FUTURE REFERENCE  
WARNING  
NOTICE TO INSTALLER:  
HAZARDOUS EXPLOSION MAY RESULT IF THESE WARNINGS AND  
INSTRUCTIONS ARE IGNORED. READ AND FOLLOW ALL WARNINGS AND  
INSTRUCTIONS IN THIS MANUAL TO AVOID PERSONAL INJURY, INCLUDING  
DEATH OR PROPERTY DAMAGE.  
LEAVE THESE INSTRUCTIONS  
WITH THE GRILL OWNER FOR  
FUTURE REFERENCE.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
General Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Installation and LP Cylinder Specifications and Safe Use. . . . . . . . . . . . . . 4–6  
Connecting LP Cylinder and Hose / Regulator to Grill . . . . . . . . . . . . . . . . 6–7  
Leak Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–9  
Pre-start Check List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Lighting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–11  
Operating Grill and Helpful Hints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12–14  
Proper Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14–16  
Transporting and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18–19  
Parts List and Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20–31  
Grilling Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover  
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.  
WARNING: Be alert to the possibility of serious bodily injury if the instructions are not followed. Be sure to read and  
carefully follow all of the messages.  
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL WARNINGS  
WARNING  
Never use natural gas in a unit designed for liquid propane gas.  
Never use charcoal or wood briquets in a gas grill. Flavoring chips must be contained in a metal  
smoking box to contain ash and prevent fires.  
Leak test all connections before first use, even if grill was purchased fully assembled and after  
each tank refill.  
Never check for leaks using a match or open flame.  
CAUTION!  
Strong odors, colds, sinus congestion, etc. may prevent the detection of  
propane. Use caution and common sense when testing for leaks.  
Always keep your gas grill free and clear of gasoline, lighter fluid, paint thinner, or other  
flammable vapors and liquids or combustible materials.  
Always check the grill prior to each use as indicated in the "Pre-Start Check List" section of this  
manual.  
DO NOT obstruct the flow of combustion or ventilation air.  
Never place more than 15 pounds on the side burner. DO NOT lean on the side burner shelf.  
Keep children and pets away from hot grill. DO NOT allow children to use or play near this grill.  
DO NOT leave the grill unattended while in use.  
DO NOT allow the gas hose to come in contact with hot surfaces.  
DO NOT allow grease from drain hole to fall on hose or valve regulator assembly.  
Keep any electrical supply cords away from water or heated surfaces.  
Keep a fire extinguisher on hand acceptable for use with gas products. Refer to your local  
authority to determine proper size and type.  
For household use only. DO NOT use this grill for anything other than its intended purpose.  
DO NOT use while under the influence of drugs or alcohol.  
Grill is hot when in use. To avoid burns:  
DO NOT attempt to move the grill.  
Lock the wheels so the unit does not accidentally move.  
Wear protective gloves or oven mitts.  
DO NOT touch any hot grill surfaces.  
DO NOT wear loose clothing or allow hair to come in contact with grill.  
USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR GAS GRILL.  
FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL  
COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE.  
SAVE THIS MANUAL FOR FUTURE REFERENCE.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as a garage,  
shed or breezeway.  
Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to  
prevent dangers associated with gas accumulation and toxic vapors. We recommend your grill  
be situated at least 10 feet (3.1 m) from buildings.  
Maintain a minimum clearance of 36 inches (91 cm) between all sides of grill and walls or other  
combustible material. DO NOT use grill under overhead unprotected combustible construction.  
DO NOT use or install this grill in or on a recreational vehicle and/or boat.  
INSTALLATION INFORMATION:  
The installation of this appliance must be in accordance with:  
All applicable local codes, or in the absence of local codes, either:  
National Fuel Gas Code ANSI Z223.1 NFPA 54  
Natural Gas and Propane Installation Code: CAN/CGA B149.1  
Natural Gas Installation Code: CAN/CGA B149.1 (Canada)  
Propane Installation Code: CAN/CGA B149.2 (Canada)  
To check your local codes, see your local LP gas dealer or natural gas company. This grill was not  
intended to be connected to a natural gas supply line. If an external electrical source is utilized, it  
must be electrically grounded in accordance with local codes, or in the absence of local codes, with  
the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA 22.1.  
WARNING  
LP GAS CYLINDER (NOT SUPPLIED WITH THIS GRILL)  
The LP cylinder is available for purchase at the same location the grill was purchased.  
The LP (Liquid Propane) gas cylinder specifically designed to be used with this grill must have  
a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-filling protection  
device (OPD).  
DO NOT connect this grill to an existing #510 POL cylinder valve with Left Hand threads. The  
Type 1 valve can be identified with the large external threads on the valve outlet.  
DO NOT connect to a propane cylinder exceeding this capacity.  
DO NOT connect to a cylinder that uses any other type of valve connection device.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
CYLINDER SPECIFICATIONS:  
When purchasing or exchanging a cylinder for your gas grill, it must be constructed and marked in  
accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation  
(DOT) or the National Standard of Canada, CAN/CSA-B339 Cylinders, Spheres and Tubes for  
Transportation of Dangerous Goods; and Commission, as applicable; and provided with a listed  
over-filling prevention device (OPD), and provided with a cylinder connection device compatible with  
the connection for outdoor cooking appliances.  
The cylinder must also be equipped with:  
A shut-off valve terminating in a Type 1 gas cylinder valve outlet.  
A Type 1 valve that prevents gas flow until a positive seal is obtained.  
An arrangement for vapor withdrawal.  
A collar to protect the cylinder shut-off valve.  
A safety relief device having direct communication with the vapor space of the cylinder.  
A listed over-filling prevention device (OPD).  
WARNING  
Turn off the cylinder valve when your grill is not in use.  
Handle the tank with care.  
Always secure the cylinder in an upright position.  
Never connect an unregulated LP gas cylinder to your grill.  
DO NOT expose LP gas cylinders to excessive heat or ignition sources.  
DO NOT store a spare LP gas cylinder under or near your grill.  
Allow only qualified LP gas dealers to fill or repair your LP gas cylinder.  
DO NOT allow the cylinder to be filled beyond 80% capacity.  
Read and follow all warnings and instructions that are on the cylinder and that accompany this  
product.  
DANGER  
Never store a spare LP gas cylinder under or near your grill. This could cause excess pressure  
to be expelled through the vapor relief valve resulting in fire, explosion, or severe personal  
injury including death.  
Note: PROPANE GAS IS HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS.  
PROPER VENTILATION IS EXTREMELY IMPORTANT.  
Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from  
obstructions and debris.  
DO NOT insert any foreign objects into the valve outlet. Damage to the back-check could  
result. A damaged back-check can cause a leak, possibly resulting in explosion, fire, severe  
bodily harm, or death.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
FILLING THE LP GAS CYLINDER:  
Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.  
New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.  
DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a  
dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to expel  
propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or  
flame an explosion causing severe burns, bodily harm, or death could occur.  
Always use a protective cylinder cap when grill is not connected to cylinder.  
If you exchange a cylinder with a qualified exchange program, be sure the cylinder has  
a Type 1 valve and an over-filling prevention device (OPD).  
INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:  
1. Check that the cylinder valve is closed by turning the knob  
clockwise.  
2. Place the cylinder into the tank holder in the bottom  
of cabinet.  
3. Orient the cylinder such that the valve opening faces the  
side burner, and so that the hose is not kinked or damaged.  
4. Fully tighten the cylinder clamp underneath tank holder to  
secure tank.  
Tank Holder  
5. Attach or detach regulator to the LP gas cylinder only  
when cylinder is at rest in tank holder.  
HOSE AND REGULATOR:  
Your grill is equipped with a Type 1 connection device with  
the following features:  
1. The system will not allow gas flow from the cylinder until  
a positive connection to the valve has been made.  
Note: The cylinder valve must be turned off before any  
connection is made or removed.  
Cylinder Clamp  
2. A thermal device that will shut off the gas flow if the device is  
subject to temperatures above 240°F to 300°F (115°C to  
150°C). If this should happen, remove the entire regulator  
assembly and dispose of properly. A replacement regulator  
assembly can be purchased by contacting customer service  
at 800-527-0717. The cause of the excessive heat should be  
determined and corrected before using your grill again.  
3. A regulator flow limiting device, when activated, restricts the  
flow of gas to 10 cubic feet per hour. If the flow limiting device  
is activated, perform Regulator Resetting Procedure.  
REGULATOR RESETTING PROCEDURE  
1. Turn burner control knobs to "OFF”, turn off the cylinder valve and disconnect regulator from LP gas  
tank. Wait approximately two minutes.  
2. Reattach regulator and slowly turn cylinder valve back on. The flow limiting device will now be reset.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
Never use your grill without leak testing all gas connections and hoses. See the section on  
"Leak Testing" in this manual for proper procedures.  
WARNING  
The pressure regulator and hose assembly supplied with your gas grill must be used.  
DO NOT attempt to connect it to any other fuel supply source such as a natural gas line.  
DO NOT use any other pressure regulator/hose assembly other than the one supplied with your grill.  
Replacement pressure regulator/hose assembly must be part No 155-4400-0, which can be obtained  
by contacting customer service at 800-527-0717.  
DO NOT attempt to adjust or repair the regulator. The regulator is designed to operate at a  
maximum output pressure of 11 inches of water column (2.74 kPa).  
During assembly and/or replacement of the gas cylinder, keep the gas supply hose free of kinks and/or  
damage.  
Visually inspect the hose assembly prior to each use for evidence of damage, excess wear, or  
deterioration. If found, replace the assembly before using your grill. Only the manufacturer's supplied  
replacement should be used.  
WARNING  
CONNECTING HOSE AND REGULATOR TO AN LP GAS CYLINDER  
Ensure the tank valve is CLOSED prior to connecting the LP gas cylinder to your grill. Turn the  
valve knob clockwise to properly close the valve. Read and follow all instructions and warnings  
on the supply hose safety tags. Read and follow all warnings in this manual concerning the safe  
use of LP gas cylinders and the hose and regulator before connecting cylinder to grill. Read and  
follow all warnings on the LP cylinder.  
CONNECTING HOSE AND REGULATOR  
1. Check that the cylinder valve is closed by turning the knob clockwise.  
2. Check that the grill’s burner control knobs are in the "OFF" positions.  
3. Remove the protective plastic cap from the cylinder valve and the connection device.  
4. Hold regulator and insert the nipple of connection device into the LP cylinder valve outlet. Ensure that  
the device is centered properly.  
5. Turn the large coupling nut clockwise by hand and tighten to a full stop. Take care not to cross thread  
the coupling nut onto the cylinder valve. Do not over-tighten the knob onto the valve. Do not use tools  
to tighten connection.  
Note: If you are unable to make the connection, repeat Steps 4 and 5.  
6. Check that the hose does not contain kinks, does not contact sharp edges, and does not contact  
surfaces that may become hot during use.  
7. Leak check all fittings before lighting your grill. See section on "Leak Testing" in this manual.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
LEAK TESTING:  
To prevent fire or explosion hazard:  
DO NOT smoke or permit ignition sources in the area while conducting a leak test.  
Perform test OUTDOORS only in a well ventilated area.  
Never perform a leak test with a match or open flame.  
Never perform a leak test while the grill is in use or while grill is still hot.  
WARNING  
WHEN TO PERFORM A LEAK TEST:  
After assembling your grill and before lighting for the first time, even if purchased fully assembled.  
Every time the LP gas cylinder is refilled or if any of the gas components are replaced.  
Any time your grill has been moved.  
At least once per year or if your grill has not been used for more than 60 days.  
CHECKING FOR LEAKS:  
1. Create a mixture of 50% water and 50% liquid dishwashing soap.  
Watch For Bubbles  
2. Open the lid.  
3. Ensure all control knobs are set to the "OFF" position.  
4. Turn on the fuel supply at the cylinder valve. Turn the  
cylinder valve knob one turn counter-clockwise.  
5. Apply the soap water mixture to the following:  
F
I
A
B
C
Supply tank (cylinder) weld.  
Connection nut to tank valve.  
G
H
Back side of connection nut to brass  
nipple.  
D
E
Brass nipple connection into regulator.  
Regulator connections to gas supply  
hoses.  
J
E
F
Gas supply hose connection to side  
burner valve assembly.  
G
H
I
Side burner valve stem cap.  
Side burner connection to hose.  
Hose connection to gas manifold.  
The full length of gas supply hose.  
Tank valve to cylinder.  
K
D
C
B
A
J
K
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Check each place listed (AK) for growing bubbles which indicates a leak.  
7. Turn off gas supply at cylinder valve.  
8. Turn on control knobs to release gas pressure in hose.  
9. Turn control knobs to "OFF" position.  
10. Tighten any leaking connections.  
11. Repeat soapy water test until no leaks are detected.  
12. Turn off gas supply at cylinder valve until you are ready to use your grill.  
13. Wash off soapy residue with cold water and towel dry.  
14. Wait 5 minutes to allow all gas to evacuate the area before lighting grill.  
CAUTION! DO NOT use the grill if leaks cannot be stopped. Contact a qualified gas appliance  
repair service.  
Note:  
The leak test must be performed in an area that has adequate lighting in order to see if  
bubbles are developing.  
WARNING  
PRE-START CHECK LIST:  
Property damage, bodily harm, severe burns, and death could result from failure to follow these  
safety steps. These steps should be performed after the grill has been assembled and prior to each  
use. DO NOT operate this grill until you have read and understand ALL of the warnings and  
instructions in this manual.  
PRE-START CHECK LIST:  
Ensure that the grill is properly assembled.  
Inspect the gas supply hose for burns, chaffing, kinks, and proper routing before each use. If it is  
evident there is excessive abrasion or wear, or the hose is cut, it must be replaced prior the grill being  
used. Replace with hose and regulator, Model No. 155-4400-0, which can be obtained by contacting  
customer service at 800-527-0717.  
Leak check all gas connections and hose. See section on "Leak Testing".  
Ensure that all electrical supply cords are properly grounded. Keep any electrical supply cord and the  
fuel supply hose away from any heated surfaces. Hose should be at least 3 inches from hot surfaces.  
Position your grill on level ground in a well ventilated location, a safe distance from combustible  
materials, buildings and overhangs.  
Properly place the empty grease tray under the grease drain hole in the bottom of the  
grill to catch grease during use.  
DO NOT obstruct the flow of combustion and ventilation air.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
Read, understand and follow all warnings and instructions contained in this manual. DO NOT skip  
any of the warnings and instructions contained in the preceding sections of this manual.  
WARNING  
LIGHTING INSTRUCTIONS:  
Follow the instructions exactly.  
1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside  
the grill. An explosion could occur if grill lid is down.  
2. Check that all burner control knobs and the cylinder valve are turned to the "OFF" position.  
3. Turn on the fuel supply by rotating the cylinder valve knob counter-clockwise to full open.  
4. DO NOT stand with head, body, or arms over the grill when lighting.  
LIGHTING THE MAIN BURNERS:  
1. Open lid before lighting burner.  
2. Make sure all control knobs are in the "OFF" position.  
3. Select the burner to be lit. Push and turn the control knob of that  
burner to the "HIGH" position.  
4. Press the electronic igniter and hold for 3–5 seconds to light burner.  
5. If ignition does NOT occur in 5 seconds, turn control knob to "OFF",  
wait 5 minutes to allow gas to dissipate and repeat lighting  
procedure.  
6. Repeat steps 3–5 for lighting each burner. Always use electronic  
igniter for lighting each burner. If burner does not ignite using the  
push-button igniter, wait 5 minutes, see "Match Lighting the Main  
Burners" section.  
7. To turn off, turn each control knob clockwise until it locks in the "OFF" position. This does not turn off  
the gas flow from the cylinder.  
Note: If burner does not light or flame is too low, you may have spider or other insect blockage in  
burner, or the flow limiting device has been activated. See "Burner Assembly/Maintenance"  
under Proper Care and Maintenance, or "Regulator Resetting Procedure" under Connecting LP  
Cylinder and Hose/Regulator to Grill.  
MATCH LIGHTING THE MAIN BURNERS:  
1. Open lid before lighting.  
Lighting Hole  
2. Turn the burner control knobs to "OFF".  
3. Place a paper match in the end of the matchlighter. Strike the  
match and place through lighting hole in the left hand side of the  
grill to approximately 1/2" (1 to 2 cm) from the burner.  
4. Turn on the FAR LEFT burner control knob to the "HIGH"  
position. The burner should light within 5 seconds.  
Matchlighter  
5. If the burner does not light, turn the control knob to "OFF" and  
wait 5 minutes for gas to dissipate and repeat lighting procedure.  
6. Once lit, light adjacent burners in sequence by pressing in and rotating the control knob to  
the "HIGH" position.  
7. If the burner does not light within the first few attempts of match lighting, there is a problem with the  
gas supply. Turn off the gas at the burner and cylinder. DO NOT attempt to operate the grill until the  
problem is found and corrected. See "Trouble Shooting" section of this manual.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIGHTING THE SIDE BURNER:  
1. Open lid before lighting side burner.  
2. Make sure control knob is in the "OFF" position.  
3. Push and turn side burner control knob to the "HIGH"  
position.  
4. Press the electronic igniter on the main control panel  
and hold for 3–5 seconds to light burner.  
5. If ignition does NOT occur in 5 seconds, turn control knob  
to "OFF", wait 5 minutes to allow gas to dissipate and  
repeat lighting procedure.  
6. To turn off, turn the control knob clockwise until it locks in  
the "OFF" position.  
Note: If burner does not light or flame is too low, you may have spider or other insect blockage in  
burner, or the flow limiting device has been activated. See "Burner Assembly/Maintenance"  
under Proper Care and Maintenance, or "Regulator Resetting Procedure" under Connecting  
LP Cylinder and Hose/Regulator to Grill.  
MATCH LIGHTING THE SIDE BURNER:  
1. Open the lid to the side burner before lighting.  
2. Turn the burner control knob to "OFF”.  
3. Strike and carefully place a match approximately 1/2" (1 to 2 cm) from the burner.  
4. Turn the side burner control knob to the "HIGH" position. The burner should light within 5 seconds.  
5. If the burner does not light, turn the control knob to "OFF" and wait 5 minutes for gas to dissipate and  
repeat lighting procedure.  
6. If the burner does not light within the first few attempts of match lighting, there is a problem with the  
gas supply. Turn off the gas at the burner and cylinder. DO NOT attempt to operate the grill until the  
problem is found and corrected. See "Trouble Shooting" section of this manual.  
Note:  
Observe flame height when lit: Flame  
should be a Blue/Yellow color between  
1"2" when burner is on "HIGH”.  
TURNING OFF THE GRILL:  
1. Turn off the cylinder valve.  
2. Turn all burner control knobs to the "OFF" position.  
Note: Turn off LP cylinder first to prevent gas from being left in the system under pressure.  
CAUTION!  
The cylinder valve should always be in the off,  
or closed, position when the grill is not in use.  
To turn off the cylinder valve,  
turn knob clockwise until it stops.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
OPERATING THE GRILL:  
Never use charcoal or wood briquets in a gas grill. Flavoring chips must be contained in a metal  
smoking box to contain ash and prevent fires. Read and follow all warnings and instructions  
contained in the preceding sections of this manual.  
BREAKING IN YOUR GRILL:  
In manufacturing and preserving the components of your grill, oil residue may be present on the  
burner and cooking surfaces of your grill.  
Before cooking on your grill for the first time you should preheat it for 15 minutes on "HIGH" to burn  
off these residual oils.  
PREHEATING THE GRILL:  
Prior to use, it is recommended that you preheat your grill. This ensures that the grilling surfaces are  
at the desired temperatures to sear the food sugars when cooking. After lighting your grill, set the  
main burner control knobs to the "HIGH" position for 10 to 15 minutes. Close the cover during the  
preheat period.  
CONTROLLING FLARE-UPS:  
Flare-ups are a part of cooking meats on a gas grill. This adds to the unique flavor of cooking on a  
gas grill. Excessive flare-ups can over-cook your food and cause a dangerous situation for you and  
your grill. Excessive flare-ups result from the build-up of grease in the bottom of your grill. If this  
should occur, DO NOT pour water onto the flames. This can cause the grease to splatter and could  
result in serious burns or bodily harm. If grease fire occurs close the lid and turn off the main burners  
until the grease burns out. Use caution when opening the lid as sudden flare-ups may occur.  
WARNING  
DO NOT leave your grill unattended while in use.  
DO NOT move grill when in use. Lock wheels in place to stabilize grill.  
DO NOT use water to extinguish flare-ups.  
Have fire extinguisher readily accessible suitable for use with gas appliances.  
TO MINIMIZE FLARE-UPS:  
Trim excess fat from meats prior to cooking.  
Cook meats with high fat contents (chicken or pork) on Low settings or indirectly.  
Ensure that your grill is on level ground and the grease is allowed to evacuate the grill through the  
drain hole in the bottom and into grease cup.  
INDIRECT COOKING:  
Indirect cooking is the process of cooking your food without the heat source being directly under your  
food. You can sear meats over a high flame on one side of the grill while slow cooking a roast on the  
other (unlit) side of the grill.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ROTISSERIE COOKING:  
Your grill was pre-drilled from factory to include mounting holes for a rotisserie (sold separately). Do  
not use a rotisserie not specifically manufactured for this grill.  
Read and follow all instructions provided with the rotisserie. Save instructions for future reference.  
Do not use the side burner when using a rotisserie.  
WARNING  
When using an AC current rotisserie, it must be electrically grounded in accordance with local  
codes, or in the absence of local codes:  
In the US:The National Electrical Code – ANSI-NFPA No. 70 – Latest Edition  
In Canada: the Canadian Electrical Code – CSA C22.1  
The Rotisserie is equipped with a three pronged plug for your protection against electrical  
shock. This plug should be plugged directly into a properly grounded 3 prong receptacle. Never  
cut or remove the grounding plug. Any extension cord must also have a 3 prong receptacle.  
All electrical supply cords should be kept away from water and any hot surfaces of the grill.  
USING OTHER FEATURES OF THE GRILL:  
THE SIDE BURNER:  
The side burner can be used to prepare side dishes such as beans, potatoes, corn, or to warm  
sauces.  
The burner valve can be adjusted from high to low depending upon your cooking demands.  
WARNING  
Read instructions on lighting your grill to light the side burner.  
Never close the side burner cover when the burner is lit.  
Use a 10" diameter pot or smaller that does NOT have an extended handle when cooking on the  
side burner. Center pot over burner.  
Never place more than 15 pounds on the side burner. The side burner is not constructed to hold  
weight exceeding 15 pounds.  
Use caution to avoid bumping grill, side burner or pot to prevent pot from spilling contents  
possibly leading to severe burns.  
DO NOT use side burner to deep fry food in oil to avoid dangers associated with oil igniting  
creating a very dangerous situation.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GRILL COOKING TIPS  
CLEANLINESS  
Always wash hands thoroughly with soap and hot water prior to handling food and after handling raw  
meat, uncooked poultry or seafood.  
When using a platter to carry raw meat, uncooked poultry or seafood to the grill, make sure to wash the  
platter thoroughly with soap and hot water before placing cooked foods back on the platter or use different  
platters for raw and cooked foods.  
Never use the same utensils when handling raw meat, uncooked poultry or seafood unless you wash the  
utensils thoroughly with soap and hot water.  
Never re-use marinade from raw meat or uncooked poultry on foods that have been cooked and are  
ready to be served.  
GRILLING TO PROPER TEMPERATURE  
Use a meat thermometer to be sure food has reached a safe internal temperature. You may order a  
Commercial-quality thermometer from Brinkmann. For more information on this product and other  
Brinkmann accessories, please refer to the accessory pages at the end of this manual.  
The US Department of Agriculture recommends the minimum temperature be reached for the  
following food items:  
Chops . . . . . . . . . . . . . . . . . . . . .145 degrees F  
Ground Meat . . . . . . . . . . . . . . .160 degrees F  
Pork . . . . . . . . . . . . . . . . . . . . . . .160 degrees F  
Poultry . . . . . . . . . . . . . . . . . . . . .180 degrees F  
Roasts . . . . . . . . . . . . . . . . . . . . .145 degrees F  
Seafood . . . . . . . . . . . . . . . . . . . .140 degrees F  
Vegetables . . . . . . . . . . . . . . . . .145 degrees F  
HELPFUL HINTS  
If you pre-cook meat or poultry, do so immediately before grilling.  
Never defrost meat at room temperature or on a countertop.  
Refrigerate leftovers within 2 hours of taking food off the grill.  
For additional information, please phone the USDA’s toll free Meat & Poultry Hotline at 800-535-4555.  
PROPER CARE & MAINTENANCE  
To protect your grill from excessive rust, the unit must be kept clean and covered at all times when not  
in use. A grill cover may be ordered directly from Brinkmann by calling 800-468-5252 or 800-527-0717.  
Wash cooking grills and heat distribution plates with hot, soapy water, rinse well and dry. Lightly coat  
cooking grill with vegetable oil or vegetable oil spray.  
Clean inside and outside of grill by wiping off with a damp cloth. Apply a light coat of vegetable oil or  
vegetable oil spray to the interior surface to prevent rusting.  
If rust appears on the exterior surface of your grill, clean and buff the affected area with steel wool or fine  
grit emery cloth. Touch-up with a good quality high-temperature resistant paint.  
The stainless steel exterior surface of your grill, can be cleaned with stainless steel cleaner.  
Never apply paint to the interior surface. Rust spots on the interior surface can be buffed, cleaned, then  
lightly coated with vegetable oil or vegetable oil spray to minimize rusting.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE:  
Keep the appliance free and clear of combustible materials, gasoline and other flammable vapors  
and liquids.  
Keep the ventilation openings of the cylinder enclosure free and clear of debris.  
Visually check burner flames for proper operation (see pictorial in "Burner Assembly/Maintenance" under  
Proper Care and Maintenance). Spiders or other insects can nest in the burner causing gas blockage.  
For safe grilling and peak performance of your grill, perform these checks at least twice per year or after  
extended periods of storage.  
Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.  
CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.  
Remove the cooking grills, heat distribution plates, and burners from inside your grill. Use a brush with hot  
water and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse completely  
with water. Towel dry and replace all components as described in the assembly instructions.  
BURNER ASSEMBLY/MAINTENANCE  
Although your burners are constructed of cast-iron, they may corrode as a result of the extreme heat and  
acids from cooking foods. Regularly inspect the burners for cracks, abnormal holes, and other signs of  
corrosion damage. If found, replace the burner.  
DO NOT obstruct the flow of combustion and ventilation air. Burner tubes can become blocked by  
spiders and other insects building their nests. Blocked burner tubes can prevent gas flow to the burners  
and could result in a burner tube fire or fire beneath the grill. To clean the Burner Assembly follow these  
instructions to clean and/or replace parts of burner assembly or if you have trouble igniting the grill.  
1. Turn gas off at control knobs and LP cylinder tank valve.  
2. Remove cooking grills and heat distribution plates.  
3. Remove cotter pins from beneath each burner “foot” using a  
screwdriver or needle nose pliers.  
4. Carefully lift each burner up and away from valve openings.  
Debris  
5. Use a narrow bottle brush or a stiff wire bent into a small hook to  
run through each burner tube and flame port several times.  
Valve Nozzle  
Note: Wear eye protection when performing procedure 6.  
6. Use compressed air to blow into burner tube and out the  
flame ports. Check each port to make sure air comes out  
each hole.  
7. Wire brush entire outer surface of burner to remove food  
residue and dirt.  
Burner Orifice  
8. Check burner for damage, if any large cracks or holes are found  
replace burner.  
IMPORTANT: Burner opening must slide over valve nozzle.  
9. Carefully replace burners.  
10. Replace cotter pins beneath each burner and follow the  
"Gas Leak Testing" section of this manual. Relight burners  
to verify proper operation.  
PROPER BURNER OPERATION  
11. Replace heat distribution plates and cooking grills.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COOKING GRILLS  
Clean with mild soap detergent and water. A brass bristled brush or a nylon cleaning pad can be used  
to remove residue from the stainless steel surfaces. Do not use steel wire bristles to clean the cooking  
grills. Steel can cause the finish to chip or crack. DO NOT use a commercial oven cleaner.  
HEAT DISTRIBUTION PLATES  
Periodically, it may be necessary to inspect and clean the heat distribution plate to prevent excess  
grease build-up. When the grill is cold, remove the cooking grill. Inspect the heat distribution plates  
and replace if broken or damaged. Do not allow heat distribution plates to become damaged to the  
extent that they may fall through onto the burners. Replace the heat distribution plates and cooking  
grills and light the burners. Operate the grill on "HIGH" for 10 minutes to remove the excess grease.  
WARNING  
TRANSPORTING AND STORAGE:  
Never move a grill when it is hot or when objects are on the cooking surfaces.  
Make sure that cylinder valve is shut off. After moving the grill check that all gas connections  
are free of leaks. Refer to instructions for Leak Testing.  
DO NOT store a spare LP gas cylinder (filled or empty) under or near the grill.  
Never store flammable liquids or spray canisters under or near the grill.  
DO NOT extinguish grease fires using water.  
If the outdoor cooking gas appliance is not in use, the gas must be turned off at the supply  
cylinder.  
Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is  
disconnected and removed from the outdoor cooking gas appliance.  
Cylinders must be stored outdoors out of reach of children and must not be stored in a  
building, garage or any other enclosed area.  
When removing the grill from storage, spider webs or other debris may be blocking the burner.  
See "Burner Assembly/Maintenance" under Proper Care and Maintenance.  
BEFORE STORING YOUR GRILL:  
Ensure that the cylinder valve is fully closed.  
Clean all surfaces.  
Lightly coat the burners with cooking oil to prevent excess rusting.  
If storing the grill indoors, disconnect the LP tank and leave the LP tank OUTDOORS.  
Place a protective cap cover on the LP tank and store the tank outdoors in a well ventilated area out  
of direct sunlight.  
Clean burner prior to use after storing, at the beginning of grilling season or after a period of one  
month not being used. Spiders and insects like to build nests in burner tubes (especially during colder  
months). These nests can cause fires in burner tubes or under grill.  
If storing the grill outdoors, cover the grill with a grill cover for protection from the weather. A grill cover  
may be ordered directly from Brinkmann by calling 800-468-5252 or 800-527-0717.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLE SHOOTING  
Problem:  
Possible Causes:  
1. Check LP cylinder fuel level.  
2. Bad electrode spark.  
Check to see if the grill will match light.  
Electrode or collector may need adjustment.  
3. Burner may not be properly seated.  
4. Burner may be obstructed.  
• Burner will not light  
5. The cylinder valve may be closed.  
6. Regulator is not properly seated on cylinder valve.  
1. Burner holes may be obstructed. See section on  
"Burner Assembly/Maintenance" under Proper Care  
and Maintenance.  
2. Burner is improperly seated on control valve.  
3. Gas connections may be loose.  
• Fire at control knob  
Leak Check and tighten all connections.  
1. Burner is obstructed. See section on  
"Burner Assembly/Maintenance" under Proper Care  
and Maintenance.  
• Yellow Flames at burner  
1. Burner holes may be obstructed. See section on  
"Burner Assembly/Maintenance" under Proper Care  
and Maintenance.  
• Flame blows out on "LOW"  
2. Grill is not sufficiently preheated.  
3. Burner is improperly seated on control valve.  
1. Flow control device has been activated in regulator.  
See Regulator Resetting Procedure under  
• Burner does not get hot enough  
• Grill is Too Hot  
Connecting LP Cylinder and Hose/Regulator to Grill.  
1. Excess grease build-up causing grease fires.  
2. Damaged or faulty regulator.  
Replace with factory authorized parts.  
3. Cook on a lower temperature setting.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREQUENTLY ASKED QUESTIONS  
Your grill's serial number and model number, and the contact information for Brinkmann Customer Service, are  
listed on a silver label found beneath the control panel, on the back of the grill or on the side of the grill body,  
under the side shelf.  
These questions and answers are for your general knowledge, and may not be applicable to your model grill.  
Question: Why does my grill not light properly?  
Answer: Always follow lighting instructions as listed on the control panel or in this manual. Also check these  
causes:  
Check LP gas supply.  
Check to ensure all gas connections are secure.  
The igniter AA battery may need replacing.  
Ignition wires may be loose. Remove the battery, inspect the igniter junction box found behind the control  
panel and connect any loose wires.  
Spark electrode tips may need repositioning. With the gas supply closed and control knob set to the "OFF"  
position, press the igniter button and have another person watch for the presence of a spark at the  
electrode tips. The gap between the spark electrode tip and spark receiver should be about 3/16". If the  
electrode tip needs to be adjusted, bend it to the appropriate gap distance.  
Check that the end of each burner venturi tube is properly located over its gas valve orifice fitting.  
There may be an obstruction in the gas line. To correct this, remove LP gas hose / regulator or natural gas  
fuel line from your grill. Open gas supply for one second to test for obstruction. If no obstruction is present,  
reconnect fuel line. If the fuel line is blocked, replace with a new hose / regulator assembly.  
If an obstruction is suspected in the hose / regulator assembly, orifice or gas valves call Brinkmann  
Customer Service at 800-527-0717.  
Question: Why does my LP gas grill have a low flame or a flame with orange / yellow color?  
Answer: You need to purge air from the gas line or reset the regulator's flow limiting device. Opening the  
cylinder valve all the way or too quickly triggers the regulator’s flow limiting device to shut down the gas flow,  
which prevents excessive gas flow to your grill. Note: This procedure should be done every time a new LP gas  
tank is connected to your grill:  
RESETTING THE REGULATOR FLOW LIMITING DEVICE  
Turn control knob to the "OFF" position.  
Turn off the LP gas tank at the cylinder valve.  
Disconnect regulator from LP gas tank.  
Let tank stand for two minutes.  
Reconnect regulator to the LP gas tank.  
Open grill lid or side burner lid. Turn the cylinder valve on slowly until 1/4 or 1/2 open.  
Light the grill by following the instructions on your control panel or in this owner's manual.  
Question: How and when do I clean the interior cooking components of my grill?  
Answer: Use a fiber or brass cleaning brush to clean the interior of the grill, cooking grills, heat distribution  
plates and grease containers. Never use a wire brush or metal scraper on porcelain-finished parts, as they can  
scratch or chip the porcelain finish and promote rusting.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREQUENTLY ASKED QUESTIONS  
Cleaning Stainless Steel Cooking Grills: Wash grills with a mild detergent and rinse with hot water before  
initial use and as needed. DO NOT use a commercial oven cleaner. For stubborn food residue, use a  
degreaser and fiber or brass cleaning brush.  
Cleaning Porcelain-Finished Cast-Iron Cooking Grills: Wash grills with a mild detergent and rinse with hot  
water before initial use and as needed. For stubborn food residue, use a degreaser and fiber or brass cleaning  
brush. Dry immediately using a soft cloth or paper towels.  
Cleaning Heat Distribution Plate: Heat distribution plates should be cleaned whenever food or grease  
drippings accumulate to reduce the chance of flare-ups. Wash heat distribution plates with a mild detergent and  
rinse with hot water. Use a degreaser and fiber or brass cleaning brush to remove stubborn food residue. Do  
not use a wire brush or metal scraper on porcelain-finished heat distribution plates, as they can scratch or chip  
the porcelain finish and promote rusting.  
Cleaning the Grease Tray and/or Grease Cup: The grease tray and/or grease cup (some models) should be  
inspected before each grill use to reduce the chance of fire. Remove grease (a plastic spatula works well) and  
wash all parts with a mild soap or degreaser and warm water solution.  
Question: What causes grill parts to rust and what effect does it have on the grill materials?  
Answer: Rusting is a natural oxidation process and may appear on cast-iron and steel parts. Rust will not  
affect the short-term performance of your grill. However, weathering and extreme heat can cause a stainless  
steel lid to turn a bronze color. This is discoloration, not rust, and is not considered a manufacturing defect.  
Question: What causes my stainless steel grill lid to discolor and how do I clean my grill lid?  
Answer: Smoke, weathering and high heat can cause a stainless steel grill lid to turn bronze in color. This is  
not to be confused with rust and is not a product defect. Machine oils used in the manufacturing process of  
stainless steel as well as cooking oils and a dirty grill lid can also encourage discoloration if the lid is not  
cleaned prior to grill use. After your grill is assembled, remove the protective PVC film from your grill lid and  
use a stainless steel cleaner and soft cloth to remove residual adhesive and oils from the inside and outside of  
your grill lid. Never use abrasive cleaners or scrubbers. In addition to the initial cleaning, routine cleaning to  
remove dirt, grease and oils will help discourage lid discoloration.  
Question: Can I convert my grill from propane gas to natural gas?  
Answer: Most gas grills are manufactured to exact specifications and are certified for either propane gas or  
natural gas use only. However, some models can be converted safely with conversion kits available for specific  
models. Contact Brinkmann Customer Service at 800-527-0717 to see if your grill can be converted.  
Question: Why does the hose / regulator assembly supplied with my grill not fit the older LP gas tank I’ve  
used for years?  
Answer: U.S. Government regulates gas appliances and LP gas tanks. When regulations were changed, the  
LP gas tank fittings were updated to ensure compliance. If your LP gas tank does not fit the hose / regulator  
supplied with your new grill, the tank is outdated and must be replaced. Note: Effective April 1, 2002, all LP gas  
tanks sold must include an "OPD" overflow protection device. This internal device prevents the LP gas tank  
from being overfilled. Tanks without an OPD valve cannot be refilled.  
Question: Sometimes I hear a humming sound coming from my gas regulator. Should I be concerned?  
Answer: The humming sound is gas flowing through the regulator. A low volume of noise is normal and will not  
interfere with the operation of your grill. If the humming noise is loud and excessive, you need to purge air from  
the gas line or reset the regulator flow limiting device following the Regulator Resetting Procedure under  
Connecting LP Cylinder and Hose/Regulator to Grill. This procedure should be done every time a new LP gas  
tank is connected to your grill. For help, refer to your owner’s manual or call Brinkmann Customer Service at  
800-527-0717.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS BAG CONTENTS  
Make sure you have all items listed under PARTS LIST and PARTS BAG CONTENTS before  
you begin the installation process.  
PARTS BAG CONTAINS:  
Qty.  
1 Screwdriver  
1 Hex Nut Wrench  
4 M6 X 12mm Bolts  
11 M6 X 12mm Round Head Bolts  
18 M6 X 60mm Bolts  
1 AA/1.5V Alkaline Battery  
18 Washers  
Screwdriver  
Hex Nut Wrench  
M6 X 12mm Bolts  
AA/1.5V Alkaline  
Battery  
M6 X 12mm Round Head Bolts  
M6 X 60mm Bolts  
Washers  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY  
BEFORE ASSEMBLING OR OPERATING YOUR GRILL.  
WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT.  
The following provided tools are required to assemble this Brinkmann ProSeries6418 Grill:  
• Flathead Screwdriver (included)  
• Hex Nut Wrench (included)  
PARTS LIST:  
1
1
1
1
1
1
1
1
1
1
4
1
2
1
1
Side Table  
Door Bracket  
1
1
1
4
4
4
1
1
1
1
1
4
1
1
Hood  
Hood Handle  
Warming Rack  
Cooking Grills  
Heat Distribution Plates  
Grill Burners  
Grease Tray  
Grill Body Assembly  
Grease Cup  
Grease Cup Bracket  
Side Burner Grate  
Control Knobs  
Temperature Gauge  
Brass Burner Ring  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
2
3
Electronic Igniter Button  
Electronic Igniter Spring  
Side Burner Assembly  
Side Burner Knob  
Left Side Cart Panel  
Right Side Cart Panel  
Rear Cart Panel  
Locking Casters  
Bottom Cart Shelf  
Doors  
4
5
6
7
8
9
10  
11  
12  
13  
14  
25  
26  
27  
28  
Small Basket  
Large Basket  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
5
6
8
7
10  
9
11  
14  
12  
13  
19  
20  
15  
16  
17  
18  
22  
21  
26  
25  
23  
27  
28  
24  
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 800-527-0717.  
(Proof of purchase will be required.)  
Inspect contents of the box to ensure all parts are included and undamaged.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Choose a good, cleared assembly  
area and get a friend to help you put  
your grill together. Lay cardboard  
down to protect grill finish and  
assembly area.  
CAUTION! Some parts may  
contain sharp edges.  
Wear protective gloves  
if necessary.  
Step 1  
Assemble bottom cart shelf and right  
side cart panel assembly by using  
four M6 X 60mm bolts with washers  
(hand tighten only at this point).  
Step 2  
Assemble bottom cart shelf and left  
side cart panel assembly by using  
four M6 X 60mm bolts with washers.  
Tighten all eight M6 X 60mm bolts with  
washers at this time.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: With the help of a friend,  
turn the cart over. Try to  
minimize the stress to the  
side panels.  
Locking Caster  
Hex Nut Wrench  
Step 3  
Attach locking casters to the bottom  
of the cart. Tighten caster bolts  
securely using hex nut wrench  
provided in parts pack.  
Note: With the help of a friend,  
turn the cart to its upright  
position.  
Step 4  
Attach back cart panel by using six  
M6 X 60mm bolts with washers.  
Note: Leave bolts hand tight until  
Step 9.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5  
Install door bracket using the four  
M6 X 60mm bolts with washers.  
Make sure door stop is set toward  
back of cart.  
Note: Leave bolts hand tight until  
Step 9.  
Spring Pin  
Step 6  
Insert right side door pivot into the  
hole in bottom cart shelf. Then align  
door with cart frame, depress  
spring pin located on top edge of  
door and slide door toward side  
cart panel until spring pin locks into  
hole in door bracket. Repeat for  
other door.  
Door Pivot  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 7  
Attach the grease cup bracket onto  
the back cart panel by inserting the  
three tabs into the slots on the back  
cart panel.  
Grease Cup Bracket  
Note: When performing Step 8,  
Lift grill body from front and  
rear panels to avoid injury to  
hands and fingers.  
Step 8  
With the help of a friend, place grill  
body assembly on grill cart. Grill  
body will rest between upper side  
sections of cart. Align front edge of  
grill body assembly with front edges  
of cart frame legs. Secure using  
four M6 X 12mm bolts. At this point,  
fully tighten six bolts holding back  
panel from Step 4 and four bolts  
holding door bracket.  
Alignment  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 9  
Attach side table to left side of cart  
frame assembly. Insert four  
M6 X 12mm round head bolts  
halfway into cart frame assembly.  
Step 10  
Place table keyholes over bolts and  
slide down, then tighten securely.  
Step 11  
Attach side burner to right side of  
cart frame assembly. Insert four  
M6 X 12mm round head bolts  
halfway into cart frame assembly.  
Step 12  
Place side burner keyholes over  
bolts and slide down, then tighten  
securely. Fasten side burner front  
panel to grill body with one  
M6 X 12mm round head bolt.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 13  
Burner Venturi  
Remove two M4 X 10mm bolts and  
spring washers from the side  
burner valve. Insert the side burner  
valve stem through the hole in the  
side burner table base, then firmly  
seat the valve nozzle into the  
burner venturi. Hold in place while  
you perform Step 14.  
Side  
Burner  
Valve  
Valve  
Nozzle  
Warning: Never use your grill  
without leak testing all  
gas connections and  
hoses. See the section  
on "Leak Testing" in this  
manual for proper  
procedures.  
Step 14  
Place the bezel over the valve stem  
and position over holes in side  
burner base and side burner valve  
assembly. Attach with two  
M4 X 10mm bolts with spring  
washers which come with valve.  
Then install the side burner control  
knob onto valve stem.  
Step 15  
Attach side burner igniter lead to  
the electrode as illustrated.  
Side Burner Igniter  
Lead  
Electrode  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 16  
Side Burner Grate  
Place side burner grate over side  
burner.  
Step 17  
Insert grease tray into opening on  
backside of grill. Make sure to slide  
tray onto tracks as illustrated.  
Grease Tray  
Step 18  
Slide grease cup into grease cup  
bracket located under grill bottom  
on backside of grill.  
Grease Cup  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 19  
Place the heat distribution plates on  
lower level of grill body assembly  
directly above burners.  
Warming Rack  
Cooking Grills  
Heat Distribution  
Plates  
Step 20  
Place cooking grills on support ribs  
directly above heat distribution  
plates.  
Step 21  
Place warming rack in slots above  
cooking grills.  
Step 22  
Remove igniter cap and insert battery  
with positive end of battery toward  
igniter cap. Ensure spring is in place  
inside igniter cap. Replace igniter cap  
and make sure the igniter is working  
properly.  
Igniter Cap  
Battery  
Step 23  
Slide small basket into slots located  
on inside of left door.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 24  
Attach large basket to cart base using  
two M6 X 12mm bolts.  
ProSeries6418 (Assembled)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
PROFESSIONAL SHISH-KABOB SKEWERS  
RIB RACK  
These heavy-duty, 18" shish-kabob skewers are extra-long for fabulous  
restaurant style kabobs. Made of rust  
resistant stainless steel to last for years.  
Chrome-plated rack can greatly increase the cooking  
capacity of your grill. Holds ribs, chicken halves, potatoes  
and corn vertically to triple cooking capacity. Allows  
smoke, steam and heat to penetrate food evenly.  
Set of 12  
MODEL  
812-2904-0  
MODEL  
812-3310-0  
SMOKER BASKET  
The unique basket weave prevents food from falling through the grill while  
allowing smoke, steam and heat to flow into the food. Great for fish, shrimp,  
vegetables and hors d’oeuvres.  
SMOKE’N SPICE SEASONING  
These custom blended spices are a delicious  
marinade seasoning for smoke cooking and  
grilling. Contains no MSG. Available in red and  
white meat varieties in a money-saving 2-pack.  
MODEL  
812-3333-0  
MODEL  
812-3322-0  
MEATLOAF BASKET  
COMMERCIAL-QUALITY MEAT THERMOMETER  
The unique basket weave prevents meatloaf from falling  
through the grill while allowing smoke, steam and heat to  
flow into the food. Also, provides a convenient method for  
lifting your meatloaf in and out of the smoker.  
An essential tool when cooking all types of meat. Get perfectly smoked  
roasts, briskets and turkeys without cutting into the meat. Commercial-  
quality thermostat features an easy-to-read 2 3/4" wide dial with a 5 1/4"  
stem. Features Fahrenheit and Centigrade readings and National Livestock  
and Meat Board recommended temperatures. Also  
MODEL  
812-0073-0  
features the newly recommended 170°F internal tem-  
perature for fresh pork. Stainless steel construction  
and dishwasher safe.  
MODEL  
812-4100-0  
CHICKEN AND TURKEY RACKS  
These chromed steel racks hold chicken, cornish hen, duck or  
turkey upright and are ideal for smoking, grilling or oven roasting  
poultry. The rack allows the meat to cook from the inside as well  
as from the outside. This speeds up cooking time, seals in flavor-  
ful juices and promotes even browning of skin. It’s a low fat way to  
cook poultry because excess fat drips off the meat. When oven  
roasting, place poultry on rack in a shallow pan of water to steam  
baste to tender perfection. When grilling or smoking, simply place  
poultry on rack atop the grill. Makes carving easier, too.  
STAINLESS STEEL  
WOOD CHIP SMOKING BOX  
Rugged stainless steel smoking box allows wood chips to  
burn longer for richer smoke flavor and provides easy  
cleanup of ashes. Ideal for charcoal, electric, gas smokers  
and grills.  
Chicken Racks (set of two)  
MODEL  
MODEL  
885-9015-0  
812-3311-0  
Turkey Rack  
MODEL  
885-9025-0  
LOOK FOR THESE AND OTHER BRINKMANN ACCESSORIES AT YOUR LOCAL RETAILER WHERE  
GRILLS ARE SOLD, OR ORDER DIRECT BY CALLING 800-468-5252.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR GRILL REPLACEMENT PARTS, COVERS & ACCESSORIES, PLEASE VISIT US ONLINE AT  
WARRANTY  
The Brinkmann Corporation warrants to the original purchaser that the Brinkmann ProSeries6418 is free from defects  
due to workmanship or materials for:  
Stainless Steel & Die cast parts - Lifetime  
Electronic ignition and burners - 1 Year  
Remaining parts - 1 Year  
The Brinkmann Corporation’s obligations under this warranty are limited to the following guidelines:  
• This warranty does not cover grills that have been altered/modified or damaged due to: normal wear, rust, abuse,  
improper maintenance and/or improper use.  
• This warranty does not cover surface scratches, rust or heat damage to the finish, which is considered normal  
wear.  
• The Brinkmann Corporation may elect to repair or replace damaged units covered by the terms of this warranty.  
• This warranty extends to the original purchaser only and is not transferable or assignable to subsequent  
purchasers.  
The Brinkmann Corporation requires reasonable proof of purchase. Therefore, we strongly recommend that you retain  
your sales receipt or invoice. To obtain replacement parts for your Brinkmann ProSeries6418 under the terms of this  
warranty, please call Customer Service Department at 800-527-0717. A receipt will be required. The Brinkmann  
Corporation will not be responsible for any grills forwarded to us without prior authorization.  
EXCEPT AS ABOVE STATED, THE BRINKMANN CORPORATION MAKES NO OTHER EXPRESS WARRANTY.  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE  
LIMITED IN DURATION TO THOSE LISTED ABOVE FROM THE DATE OF PURCHASE. SOME STATES DO NOT  
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU.  
ANY LIABILITY FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE FAILURE OF  
THE BRINKMANN PROSERIES6418 TO COMPLY WITH THIS WARRANTY OR ANY IMPLIED WARRANTY IS  
EXCLUDED. CUSTOMER ACKNOWLEDGES THAT THE PURCHASE PRICE CHARGED IS BASED UPON THE  
LIMITATIONS CONTAINED IN THE WARRANTY SET OUT ABOVE. SOME STATES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR  
EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY  
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
©2006 The Brinkmann Corporation  
Dallas, Texas 75244 U.S.A  
Owner’s Manual for Model  
810-6418-3  
140-6418-3  
11/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box Computer Accessories KVP40004A User Manual
Black Decker Battery Charger 91 005 User Manual
Blodgett Fryer BLG 30E User Manual
Blue Rhino Charcoal Grill NPC1605 4SS User Manual
Brother Printer QL 650TD User Manual
Bushnell Hunting Equipment 205110 User Manual
Cabletron Systems Satellite Radio 9033073 User Manual
Chamberlain Safety Gate Swing GATE User Manual
Chicago Electric Blower 95235 User Manual
Cisco Systems Network Card MEMCUE 256D= User Manual