MultiMix M 810 Duo
MultiMix M 820 Trio
MultiMix M 830 Trio
MultiMix M 870 Quattro
MultiMix M 880 Quattro
MultiMix M 880 M Quattro pro
Type 4642
English
Use Instructions
Guarantee
Service Centers
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
English
Description
All models:
ꢁ Motor part
ꢂ Opening for the handblender
attachment P
% Cover for the openingꢀꢂ
ꢃ Opening marked with a hexagon
ꢄ Opening marked with a circle
ꢅ Ejection key for the dough hooks ꢆ/M,
the whisks N/O and the chopper
attachment CA-M
Automatic shut-off
For UK only:
If the appliance is overloaded, e. g. if the
motor is blocked, the motor part may be
automatically switched off.
If this is the case, light vibrations may be
observed. The inserts stop rotating or
rotate only very slowly. Turn the switch off,
so that the motor can cool off. After a
cooling off period of at least 10 minutes it
can be switched on again.
Our products are engineered to meet the
highest standards of quality, functionality
and design. We hope you thoroughly enjoy
your new Braun appliance.
IMPORTANT
Your appliance is already fitted with a plug
incorporating a 3 A fuse. If it does not fit
your socket the plug should be cut off from
the mains lead and an appropriate plug
fitted. Throw away the cut off plug; do not
insert it in a 13 A socket elsewhere in the
house as this could cause a shock hazard.
Caution
Read all instructions carefully before
using this product.
• This appliance was constructed to
process normal household quantities.
ꢇ Switch
Switch ꢇ
IMPORTANT – Fitting a Different Plug:
ꢈ Locking flap-up spout for winding up the
cord around the motor part (g)
ꢉ Anti-skid base ring
Switch position:
P = «pulse» (speed corresponds
to setting «3»
• Please remember to keep your Braun
handmixer out of the reach of children.
The wires in the mains lead are coloured in
accordance with the following code:
ꢆ Dough hook with hexagonal plate
M Dough hook with round plate
N Whisk with round plate
O Whisk with hexagonal plate
0 = Off
• Before operating, check whether your
voltage corresponds to the voltage
printed on the top of the unit.
1 = Low speed
2 = Medium speed
3 = High speed
Blue – Neutral
Brown – Live
If the colours of the wires in the mains lead
do not correspond with the coloured
markings identifying the terminals in your
plug, proceed as follows:
• Only with the models M 870, 880 and
M 880 M:
The blade inserts are very sharp!
Do not reach into or underneath the
blades.
With the models M 820, M 830, M 870,
M 880 and M 880 M only:
P Handblender attachment
Q Mark for maximum immersion of the
handblender attachment P
Assembling/disassembling
Important: Always set the switch to
position «0» and plug the appliance before
assembling or disassembling the
The blue wire must be connected to the
terminal marked with the letter N or
coloured black. The brown wire must be
connected to the terminal marked with the
letter L or coloured red.
appliance, in order to avoid accientally
switching on the appliance when inserting
the two dough hooks or two whisks.
For inserting the dough hooks and whisks
correctly, see illustrations (a) and (b).
Once inserted, the dough hooks or whisks
can only be ejected by pressing the
ejection key (c). However, for safety
reasons this is only possible when the
handmixer is switched off.
• Braun electric appliances meet
applicable safety standards.
With the models M 830, M 880
and M 880 M only:
R Mixing/measuring beaker with air-tight
lid (to be used only with the hand-
blender attachment P)
• This appliance can only be opened by
an authorised Braun Service Centre for
repairs.
With the models M 810, M 830, M 880
and M 880 M only:
S Wall holder
• The cord of this appliance may only be
replaced by an authorised Braun
Service Centre since special tools are
required.
With the models M 870, M 880
and M 880 M only:
How to use the handmixer
Never connect the blue or brown wire to
the earth pin (E), when using a three pin
plug. The appliance must be protected by
a 3 amp fuse if a 13A (BS 1363) plug is
used.
• Faulty, unqualified repair work may
cause accidents or injury to the user.
Chopper attachment CA-M T-W
Dough hooks ꢆ/M
T Upper part
For kneading yeast dough, pasta dough,
pastries, as well as for mixing heavy
minced meat doughs.
U Blade insert
V Chopper bowl with modell indenti-
fication on the bowl (CA)
W Anti-skid double function base/lid
The fuse cover must be refitted when
changing the fuse. If the fuse cover is lost
do not use the plug until a replacement
cover has been fitted. These parts are
available from authorised Braun Service
Dealers. Never use the plug without the
fuse cover fitted.
Generally all speed settings may be used.
The speed settings are recommended as
follows:
Notice: All models can be extended by the
handblender attachment P and the
chopper attachment CA-M T-W and
HC-M (without illustration), if these
attachments are not standard with your
model.
Switch position 1:
• Mixing of e. g. nuts and fruits into
heavy doughs.
Switch position 2:
• Kneading of the dough ball and working
in of ingredients.
Specifications
Voltage/wattage: see type plate on the
motor part ꢁ.
Switch position 3:
• Fast mixing of all ingredients.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
Keep the switch pressed down as long as
you operate your handblender attachment.
Turn appliance off first by releasing the
switch when you are finished.
Food preparation and chopping
• Do not chop ice cubes or extremely hard
food, such as nutmeg, chocolate and
coffee beans.
• When chopping meat, ensure that all
bones, tendons and gristles are
removed.
• Besides meat, the chopper attachment
can also be used, e. g. for cheese,
onions, parsley, dried fruits, tomatoes,
carrots, apples etc.
• When chopping cooked food, allow it to
cool off for a few minutes before putting
it into the chopper bowl.
Whisks N/O
Handblender attachment
For mixing cake mixtures, sponges and
mashed potatoes.
(With the models M 820, M 830,
M 870, M 880 and M 880 M)
For whipping cream (minimum 100 ml
cream), eggwhites (minimum 1 eggwhite),
and creamy ingredients.
Important: The mixing/measuring beaker
may be used only with the handblender
attachment for processing smaller
quantities. It should not be used with a
whisk. Do not place the mixing/measuring
beaker into a microwave oven.
To insert the handblender attachment P
into the motor part, slide back the cover
of the opening for the handblender
Generally all speed settings may be used.
The speed settings are recommended as
follows:
attachment % (d) and insert the hand-
blender attachment into the opening ꢂ so
that the marking on the handblender
attachment aligns with the marking on the
motor part (e). Then turn the handblender
90° clockwise (e), until it locks. To remove
the handblender attachment, turn it 90°
anti-clockwise and pull it off.
Switch position 1:
• For carefully adding whipped eggwhites
or other foamy ingredients.
• Adding flour to foamy substances,
without flattening them (e. g. sponges).
• Smoothly adding flour, cacao etc.
without blowing them around.
• Mashing of boiled potatoes for mashed
potatoes.
Chopper attachment
• The double function base/lid also serves
as air-tight cover for the chopper bowl.
(With the models M 870, M 880 and
M 880 M only)
Maximum capacity: 250 g of meat
Important: The handblender attachment
may only be immersed to the mark (f).
Assembling and operating
• Pull off the plastic blade cover from the
blade insert.
The handblender attachment blends and
mixes fast and easily. Use it to make
sauces, soups, mayonnaise, dietary and
baby food.
Switch position 2:
• Initial and final speed when whipping
larger quantities of cream.
• Whipping of smaller quantities of cream.
• Adding of liquids to processed goods
(little splashing of the liquids, e. g.
mashed potatoes).
Caution: Blades are sharp!
Always hold by the upper plastic part.
Important: The handblender attachment
can be operated only in the «pulse» mode
(switch position «P» – see section «Switch
ꢇ»). When the handblender attachment is
inserted into the motor part, the switch
positions 1, 2 and 3 do not function for
safety reasons.
• Place the double function base/lid on
the bottom of the chopper bowl.
• Place the blade insert on the centre pin
of the chopper bowl (h).
• Place the food into the chopper bowl.
• Set the upper part on the chopper
bowl (i).
Switch position 3:
• Whipping of cream, eggwhites, sponges
and other foamy goods, e. g. desserts.
• Mixing of creamy goods and mixtures.
• Safety look: The chopper will not work
if the upper part is not fitted properly.
• Connect the chopper attachment with
the motor part by inserting the two pins
on the upper part into the two corre-
sponding openings on the bottom of the
motor part, until the upper part locks into
place (j).
• Use the «pulse» mode (switch position
«P») for brief and fast processing
whereas the switch position «3» should
be used for fine grating.
The handblender attachment can be used
in the practical mixing/measuring beaker,
but you can operate the Braun hand-
blender attachment just as well in any
bowl, pan or other container too.
Tips:
– To obtain optimum results when making
cake mixtures, etc. all ingredients
should have the same temperature.
Butter, eggs, etc. should be removed
from the refrigerator some time before
they are being used.
– Whipped cream has more volume, if the
cream is well chilled before being
whipped.
– Mashed potatoes will become more
creamy, if all ingredients are being used
as hot as possible (e. g. potatoes
immediately after boiling).
Should you want to blend directly in the
saucepan while cooking, take the pan from
the stove first and allow to cool to protect
your handblender attachment from
overheating. Never use your handblender
attachment in very hot or boiling in-
gredients. To avoid splashing, insert the
handblender attachment into the vessel
first, and then switch the appliance on.
Always hold the motor part with your
hand and do not allow the appliance to
operate unsupervised.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ ꢀ
Guarantee
For UK only:
This guarantee in no way affects your
rights under statutory law.
Processing guide for the chopper attachment CA-M
We grant a 1 year guarantee on the
product commencing on the date of
purchase.
Within the guarantee period we will
eliminate, free of charge, any defects in
the appliance resulting from faults in
material or workmanship either by
repairing, or exchanging parts or
exchanging the whole appliance as we
may choose.
Food
Quantity
Preparation
Approx. time
Beef (lean)
Pork (lean)
Cheese
Almonds
Hard boiled eggs
Onions
Parsley
Carrots
Hard rolls
(for breadcrumbs)
250 g
250 g
100 g
200 g
2 eggs
100 g
handful
200 g
1 roll
approx. 2 cm cubes
approx. 2 cm cubes
approx. 2 cm cubes
whole
halved
quartered
stalks removed
cut in pieces
cut in pieces
15 sec.
15- 20 sec.
40- 50 sec.
30- 40 sec.
3 - 5 pulses
5- 10 sec.
15 - 20 sec.
15 sec.
20 - 30 sec.
Not covered by this guarantee: damage
arising from improper use (operation
with incorrect current/voltage, plugging
it into an unsuitable power point,
breakage), normal wear and defects
which have a negligible effect on the
value or operation of the appliance.
The guarantee becomes void if repairs
are undertaken by unauthorized
persons and if original Braun parts are
not used.
The guarantee only comes into force if
the date of purchase is confirmed by the
dealer's stamp and signature on the
guarantee card and registration card.
This guarantee extends to every country
where this appliance is supplied by
Braun or its appointed distributor and
where no import restrictions or other
legal regulations hinder or prevent
service being given under guarantee.
Service under the guarantee does not
affect the expiry date of the guarantee.
The guarantee on parts or entire appli-
ances which are exchanged ends when
the guarantee on this appliance expires.
In the event of a claim under this
guarantee, hand in the complete appli-
ance with the valid guarantee card to
your dealer, or send both to the nearest
Braun Customer Service Centre.
All other claims including for damages
resulting from this guarantee are
excluded unless our liability is legally
mandatory.
The processing times indicated are approximate; they also depend on the quality
of the food to be processed and the degree of fineness you want.
Disassembling
Handblender attachment P
• Switch the motor part off (switch position
«0») before you start disassembling.
To remove the motor part from the
upper part, keep the ejection key
pressed, hold the upper part of the
chopper attachment with one hand and
lift the motor part off (k).
Caution! The blade is very sharp.
The handblender attachment can be
cleaned by holding it under running water.
It may be necessary to clean it with soap/
mild detergents and water to remove
residues from oily foods.
Do not use any sharp or pointed objects to
remove residues under the blade.
The mixing/measuring beaker can be
cleaned in the dishwasher.
• Before you remove the processed food
from the chopper bowl, first remove the
blade insert. Caution! The blade Uꢀis
very sharp. Hold by the upper plastic
part only. For safety reasons, the blade
insert cannot be removed in every
position. If necessary, turn the upper
plastic part slightly to and fro until the
blade insert can be removed.
Chopper attachment
Caution when handling the blade insert.
Always hold it by the upper plastic part.
The blade insert, the chopper bowl and the
anti-skid double function base/lid may be
cleaned in the dishwasher.
Do not immerse the upper part in water!
Rinse only the inside of the upper part
under running water, but keep water from
entering the outside of the upper part
where the motor part is to be attached.
Cleaning
Notice: When processing foods with colour
(e. g. carrots), the plastic parts of the
appliance can become discoloured.
Wipe these parts with cooking oil, before
cleaning them with detergents.
Subject to change without notice.
Handmixer:
Always unplug the appliance before
cleaning.
The dough hooks and the whisks can be
cleaned in the dishwasher. The motor part
should be cleaned with a damp cloth only.
Do not immerse the motor part in water or
hold it under running water.
This product conforms to
the EMC-Requirements as laid
down by the Council Directive
89/336/EEC.
Those claims arising out of the sales
contract with the vendor are not affected
by this guarantee.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|