4
E
10R-0021218
Download from Www.Somanuals.com. All Manuals Search And Download.
11
00
Contents
Additional Information
Simple Troubleshooting Guide
The following checklist might helped to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist below .
Cause/Solution
Problem
.
.
.
.
.
No power.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
7
Some errors occur in the
LCD or no function when
pressing the button.
9
Press RESET button.
VCD/CD
Tuner
Listening to the Radio 39
Band Selector 39
Manual/Automatic Tuning 39
DX/LOC Selector 39
Selecting the Stored Station 39
MO/ST Selector 40
Scanning/Memorizing Stations
Playing a VCD/CD Disc 34
Selecting Tracks Fast 34
Repeat Playing 34
Playing Tracks at Random 34
Number Buttons 34
Stop Playing 34
Pause the Playback 34
Skip Backward/Forward/F.F/F.REW the
Playback 34
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Unable to receive stations.
Automatically
40
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
Poor effect on receiving a
station.
Number Buttons 40
On Screen Display 40
System Switch 35
Slow Motion Playback 35
Increase Picture Size 35
On Screen Display 35
Setting the Playback Time 35
Selecting Channel 36
Selecting Title 36
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
10
11
AUX
AUX Touch Screen Menu
41
.
.
.
CDs cannot be loaded.
Sound skips.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
Additional Information
Simple Troubleshooting Guide
Program Playing 36
42
8
MP4(AVI,MPEG4)
Basic Operation of MP4 37
Number Buttons 37
Stop the Playback 37
Pause the Playback 37
No images.
The Video line from main unit to the TVis not
connected properly.
.
Improper setting of the color system. Set the color
system to PAL or NTSC according to the
connected television.
Images skip.
On Screen Display 37
Repeat Playing 37
Setting the Playback Time 37
Slow Motion Playback 37
Selecting Tracks Fast 38
Skip Backward/Forward/F.F/F.REW the
Playback 38
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
Playing Tracks at Random 38
Increase Picture Size 38
Changing Audio Language 38
Changing the Subtitle Language 38
Due to continuous product improvement, the operations
are subject to run the model.
42
3
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Before You Start
AUX
AUX Touch Screen Menu
IMPORTANT SAFEGUARDS About this manual
Press SRC to switch to the AUX mode:
Be sure to connect the color coded leads
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
ion or damage the vehicle, s electrical sy-
stem.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MP4 operation
that can only be operated by the remote
control, there are also functions can be
operated by the buttons provided for
the main unit.
1
AV SET
2
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never con-
nect the left and right channel speaker
cables each other or to the vehicle body.
SRC
3
4
Make sure all the connections are comp-
letely correct before turning on your unit.
AV SET
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
For more details please refer to pages 18 to 19.
To adjust VIDEO ADJUST, a DVD should be
inserted and played normally at first.
Do not block vents or radiator panels.
Blocking them will cause heat to build up
inside and may result in fire.
5
VOL+
VOL-
To increase the volume
To decrease the volume
6
7
To lest the driver distrack his attention
from, please install the unit in an apt
place.
Using the unit after starting the engine,
otherwise the unit can not be started, be-
cause the electric energy of battery was
used up.
8
9
The unit must be screened from direct
sunlight, or the electric energy of battery
will be wasting for the high temperature.
Do not use the unit in extreme high tem-
perature or such low temperature con-
ditions, and also avoid humidity and direct
sunlight.
10
Take care of the magnetism of the unit.
Do no put the credit card, cassette or
watch around the unit, or they would be
broken or some information in them lose.
11
12
To lest disturb the video frequency, keep
far away from the unit when using your
phone.
Do not put the remote control under high
temperature or where the sun strikes it,
or else the control remote can not work
normally.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
09
01
Tuner
Before You Start
MO/ST Selector
Number Buttons
PRECAUTIONS
6
Press ST button on the remote control to
During radio status, press Number
Buttons to receive the stored stations.
This unit can play the following discs only:
select MONO mode or STEREO mode.
Type of disc
DVD
Label on the disc
Recorded material
Size of disc
Stereo reception is charged when STEREO
appears. It is switched to mono mode when
MONO appears. ST OFF appears on
the display to switch to MONO compulsively.
During radio status, Number Buttons
23
Sound and moving
pictures
(from 1 to 6)
can help you store your
favorite station. You can follow the steps
as below:
Sound and moving
pictures
VCD
CD
Note:
1
When receiving a station,press and hold
It is only valid on remote control.
Switch to MONO compulsively to improve
the listening quality when week signal.
It is only valid in FM tuning.
*
*
any one of the Number Buttons
Sound only
Sound only
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corres-
ponding number button.
*
MP3
Sound and moving
pictures
Scanning/Memorizing Stations
Automatically
MPEG-4
2
3
Press 4 AMS button to receive stations
automatically, and store them in 1 to 6
number respectively.
NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.
4
During radio status, you can press AMS
button on the remote control to scan each
stored station 5 seconds respectively which
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Do not use your CDs with paste residue
or ink attached.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
button station will be stored in that
number button.
23
stored in Number Buttons (from 1 to 6).
You can press the corresponding Number
Buttons or AMS button when your desired
station is charged. And it starts playing that
station.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
Note:
5
Press
in the monitor performs the
*
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
4
When press and hold
AMS button for
same function.
more than 2 seconds, it will activate auto-
matically memory storing function. The
radio automatically selects a station and
(Shown as the picture)
On Screen Display
23
has it stored in any one of the Number
Buttons (from1 to 6).
8
During radio mode, press OSD to
display the edition information and the
LCD display the current time.
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
Note:
* The unit can be stored up to 6 stations
for each band.
Note:
* Press
in the monitor performs the
Handle the disc by its edge to keep
the disc clean, and do not touch the surface.
It is only valid on remote control.
*
same function.
Besides playing the discs above, the unit also can be connected to other connector.
Please refer to the details on page 19 before you playing them.
40
5
Download from Www.Somanuals.com. All Manuals Search And Download.
09
01
Before You Start
Tuner
Band Selector
Maintenance
Listening to the radio
2
During radio status, repeatedly press
3
3
BAND button to select bands in the
FM1
CH:1
87.50MHz
1
following order:
Replacing the Fuse
4
FM1
FM3
AM1
FM2
Make sure the amperage matches the
specified value when replacing the
fuses. If the fuse is blown, check the
power connection and replace with a
new one. If the same problem occurs,
it would be subjected to the malfunction.
In such cases, please consult to the
nearest service dealer.
87.50M
87.50M
108.00M
106.00M
AM2
Note:
90.00M
98.00M
5
Insert the Battery Holder into the Remote
Control.
6
* Press BAND on the head unit or
in
the monitor performs the same function.
Manual/Automatic Tuning
6
8
7
9
Manual Tuning: Press
on the remote control continuously to select
a station downward or upward respectively.
(
or ) button
1
2
Band Indicator
Shows which band the radio is tuned
to.
Preset Number Indicator
Automatic Tuning: Press and hold
(
or
!
Warning
) button for more than 3 seconds, the ra-
dio automatically searches a station down-
ward or upward respectively and plays when
it finds a station.
PrecautionsonUsingLithium
Battery
Neverusethefusewiththerated
amperagemorethanthatsuppliedto
yourunit,otherwiseitwilldamagethe
unit.
Shows what preset has been selected.
3 Frequency Indicator
Shows which frequency the tuner is
tuned.
Alwayskeepthelithiumbatterybeyond
children sreach.Incase
swallowed,seeadoctorimmediately.
Note:
Press
/
on the head unit or
in the
*
4 SEEK+/SEEK-
monitor performs the same function.
Briefly press to tune by the presettable
range, hold and press to tune automatically.
Replacing the Battery
Cleaningthebatterywithadrycloth,
toensureitsperfectconnected.
DX/LOC Selector
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
5
The6stationsofthecurrentband.
5
During radio status, press
LOC button
Makesuretheproperpolaritywhen
loadingwiththebattery.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
to select strong or weak station reception.
LOC ON appears on the display and
only local station is available. LOC OFF
appears on the display both distance and
local stations can be received.
Topreventshortcircuit,donotuse
metaltweezertoclipthebattery.
6
7
BAND
To select the bands.
Note:
AMS
Briefly press to scan the current station,
hold and press to tune automatically.
!
Warning!
Improperhandlewiththebatterymay
leadtoexplosion.
Gently pull out the Battery Holder while
pressing the Stopper.
The function is only valid on remote
*
control.
Itcannotbecharged,disassembledor
thrownintoafire.
The function is invalid in AM tuning.
*
8
9
MENU
Press this button to set the main menu.
Selecting the Stored Station
SRC
Press this button to select the signal
source.
27
During radio status, press
button to
select the stored station upward, press to
select the stored station downward.
Putthebutton-typebatterywithmark(+)
upwardintotheBatteryHolder.
Note:
The function is only valid on remote
control.
*
6
39
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
MP4(AVI,MPEG4)
Before You Start
Note:
Selecting Tracks Fast
Location of the Controls
The function is only valid on remote
control.
To remove the image by pressing
*
*
During MP4(AVI,MPEG4) playback, first
21
press
to return to the beginning of
button.
27
21
the current track, press
again within
The Expanding
21
3 seconds to play previous track, press
to play next track.
Changing audio language
(Multi-audio)
Note:
* Pressing
unit or
and button on the head
and in the monitor also
With MP4(AVI,MPEG4) disc featuring
multi-audio recordings, you can press
AUDIO to switch between language and
6
performs the same function.
audio systems during playback.
Skip backward/forward/F.F
/F.REW the playback
Selection options switch as follows:
AUDIO 1
AUDIO 2
AUDIO 3
20
Press
(
or ) on remote control to
5
13
perform fast reward or fast forward. Each
press will change as the following
Note:
6
*
*
This function is operated by using the
11
remote control.
2 X
4 X
8 X
16X
This function only operates with disc
featuring multi-audio recordings.
Note:
2
*
The number in the
mark on a
* Press
and
in the monitor
disc package indicates the number of
recorded languages/audio systems.
performs the same function.
Playing Tracks at Random
The Whole
Changing the subtitle language
(Multi-subtitle)
During MP4(AVI,MPEG4) playback, press
16
RDM button on the remote control to
17
15
play any track at random under the directory
which you select. Press it again to cancel
this function.
With MP4(AVI,MPEG4) disc featuring
multi-subtitle recordings. You can press
SUB-T to switch between subtitle languages
during playback.
16
5
14
Note:
* The function is only valid on remote
control.
Selection options switch as follows:
Subtitles 1
Subtitles 2
Subtitles OFF
Increase the size of the picture
8
7
1
3
20
4
2
18
19
10
12
Note:
9
During MP4(AVI,MPEG4) mode, Press
* This function is operated by using the
remote control.
* This function only operates with disc
ZOOM to increase the picture in size. There
are different sizes and they are as follows.
Each pressing will increase the size til
it reaches the maximum.
featuring multi-subtitle recordings.
2
* The number in the
mark on a disc
2X
3X
4X
package indicates the number of recorded
subtitle languages.
No Change
38
7
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
MP4(AVI,MPEG4)
Before You Start
Single elapsed time
Basic Operation of Mp4
Single remain time
OFF
Insert a MP4(AVI,MPEG4) disc into the slot,
the unit will automatically switch on, if a disc
The Base
8
Press and hold
current time.
OSD LCD displays the
1
is loaded, press
playback.
SOURCE to start the
Note:
Note:
You can press EJECT button on the head
unit to eject the MP4 disc.
* This function is operated by using the
remote control.
*
Repeat Playing
Number Buttons
you can select any tracks directly by using
During MP4 (AVI,MPEG4) playback , press
23
Number Buttons( 0~9). The track
15
RPT to perform replaying function,
you selected will be played automatically.
9
first press it to replay the current track,
press it again to cancel this function.
Note:
Note:
* This function is operated by using the
remote control only.
* This function is operated by using the
remote control only.
SOURCE/POWER
(MENU) Button
Stop the playback
Briefly press to select the different modes
available, hold and press it to turn the unit
on or off.
During playback mode, briefly press to set
DVD menu; During radio mode,briefly press
it to set the radio menu,hold and press it to
set the main menu.
Setting the Playback Time
DuringMP4(AVI,MPEG4) playback, firstly
18
press
topause playing,thenpress17
During MP4(AVI,MPEG4) playback, firstly
EJECT Button
Press it to insert or eject a disc.
toplayfromthebeginningofthedisc, During
stopstatus,press pausetoresume playing
state.
press
GOTO, and monitor shows select
2
USB Socket
: --- , press your desired time of the playback
by using number buttons. and press ENTER
to set the status. Secondly press GOTO
button,and the monitor shows: -:--:--, input
your desired time, then press ENTER.
BAND/ (band selector/play/pause) Button
(Back Space)/CLOSE Button
During radio mode,press it to select the bands;
During playback mode,press it to play or
pause.
Note:
Disc Loading Slot
* Press
in the monitor performs the
same function.
OPEN Button
MUTE Button
Note:
[
/
]/[
/
]([Adjust frequencyback-
Pause the Playback
ward/Previous]/[Adjust frequency forward
/Next Track])
*
This function is operated by using the
remote control.
LCD Screen
During MP4(AVI,MPEG4) playback,
REL (release the front panel) Button
SD Card Slot
(ANGEL+) Button
(ANGEL-) Button
press
button to suspend the
17
playback, Press it again to return to
normal playback.
Slow motion playback
EQ (equalizer) Button
VOL+/ VOL-/SEL
REMOTE Infrared Sensor
RESET Button
During MP4(AVI,MPEG4) mode, press
SLOW to slow forward or slow backward.
There are speeds as follow:
Note:
* Press on the head unit or
in the
monitor performs the same function.
1/2
1/ 4
1/8
1/16
A/V IN
On Screen Display
8
Press
OSD button the display shows:
Note:
*
This function is operated by using the
remote control.
8
37
Download from Www.Somanuals.com. All Manuals Search And Download.
01
07
VCD/CD
Before You Start
Selecting Channel
Program Playing
Remote Control
6
During VCD status, repeatedly press
AUDIO button to select the following
channel:
During VCD/CD mode, press 13 PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press 27 to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
Stereo
Mono Right
Mono Left
the cursor to
previous page; move the cursor to
press ENTER to the next page.
During this process, press
the program playing.
and press ENTER to the
Selecting the corresponding channel to set
the different sound characters.
and
Note:
to cancel
18
The function is only valid on remote
control.
*
Note:
The function is only valid on remote
control.
*
PBC Selector
3
During VCD status, firstly press TITLE
button, the PBC playback starts and the menu
of entire disc appears on LCD. And then you
can select your desired track by using 27 or
23
.
When a track is playing, you can press
MENU to return to the menu, if you would
like to end the track and select others. To
3
cancel PBC playing, press TITLE button
again.
Note:
PBC playing confirms to version 2.0 or
above disc only.
*
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
36
9
Download from Www.Somanuals.com. All Manuals Search And Download.
07
01
Before You Start
VCD/CD
On Screen Display
SOURCE/PWR (mode switch/turn on of off)
GOTO (playing time/track)
VOL+/VOL-/SEL
System Switch
During VCD mode, Press
control to switch to PAL or NTSC or AUTO
system.
P/N on remote
8
During VCD/CD status, brief press
OSD button the display shows:
RPT(Repeat Playing)
RDM (Playing Tracks at Random)
(Pause/Play)
Single elapsed time
Single remain time
BAND/TITLE (band selection/title menu)
Total
Total
remain time
OFF
elapsed time
AMS/MENU (preset stations,memory
automatically/menu)
(Stop Playing)
8
Press and hold OSD to display the
Note:
LOC/SUB -T (long distant orlocal station
selection/region function/subtitle display)
current time.
SETUP
The function is only valid on remote
control.
*
Note:
(F.R/F.F)
ST/AUDIO (mono or stereo/language or
channel selector)
The function is only valid on remote
control.
*
(Previous/Next Track)
Slow motion playback
ANGLE (play angle)
Setting the Playback Time
CLEAR
During VCD mode, press SLOW to
slow forward or slow backward. There
are speeds as follow:.
2
During CD playback, first press
GOTO,
OSD (current display)
0~9 (Number) Buttons
Eject Button
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons.
Secondly press GOTO button, track go to
:--:-- appears on TFT, also input your
desired numbers to play the current time of
your selection.
Briefly press itto display thecurrent
information; press andhold it toadjust
the current setup
1/2
1/ 4
1/8
1/16
LOUD (loudness)
EQ (equalizer)
ZOOM (to increase the picture)
SLOW (Slow play)
Note:
The function is only valid on remote
control.
*
2
(Left/Right/Up/Down
During VCD mode, press GOTO button
ENTER
ENTER)
to set the playing time, when the TFT dis-
play : track/disc time/track time/repeat
][ ] to select the
options, press ENTER to set the status.
P/N( system adjusting)
Mute
/time disp. Press
[
Increase the size of the picture
23
Then press NUMBER BUTTONS to set
9
During VCD mode, Press
ZOOM to
PROG(Program playing)
the current status.
increase the picture in size. There are sizes
as follow, Each pressing increases the size
until the maximum size is reached.
Note:
*
This function is operated by using the
remote control.
2X
3X
4X
No Change
Note:
The function is only valid on remote
control.
To remove the image by pressing button.
27
*
*
10
35
Download from Www.Somanuals.com. All Manuals Search And Download.
07
01
VCD/CD
Before You Start
Number Buttons
Playing a VCD/CD
Specifications
Insert a VCD/CD disc into the slot, the unit
will automatically switch on, if a disc is
loaded, press SOURCE to start the playback.
23
Press one of
Number Buttons(0~9) to
select a track to play automatically.
General
AM Tuner Section
Note:
Note:
* This function is operated by using the
remote control.
Frequency Range
(Optional)
Power Requirement
14.4V DC
You can eject a disc by pressing EJECT
*
522-1620(KHz)
(Europe)
button on the base or on the remote
(11-16V allowable)
22
* Press
CLEAR to clear the mistake input.
control or
in the monitor.
Load Impedance
530-1710(KHz)
(U.S.A.)
Selecting Tracks Fast
Max.Power Output
Tone Controls
85W x 4
Stop Playing
IF Range
450KHz
32dBuV
During VCD/CD playback, first press
10dB
Bass100Hz
Treble10KHz
During VCD/CD playback, firstly Press18
button then press or to replay, press
Usable Sensitivity
(-20dB)
21
to return to the beginning of the
21
current track, press
again within
again to stop the playback.
18
3 seconds to play previous track ,press
Approx.160x178x50
mm
Dimensions
TFT Sizes
21
to play next track .
DVD/VCD/CD Player Section
Note:
* Press
same function.
(d/w/h)
Approx.170x117.5x16.5
Note:
* Pressing and
unit or and
in the monitor performs the
button on the head
in the monitor also
VCDSignalSystem
Frequency Response
Signal-to-noise Ratio
AUTO/PAL/NTSC
20Hz to 20KHz
mm
(d/w/h)
performs the same function.
Angle between
folded and unfolded
Weight
30~100
60dB
Pause the Playback
Repeat Playing
Separation
Distortion
55dB(1KHz)
1%
Approx.2.3kg
During VCD/CD playback, press
switch between play and pause.
to
15
During VCD/CD playback , press
RPT
to perform replaying function,first press it
to replay the current track, press it again to
cancel this function.
FM Section
Note:
* Press
in the monitor or
unit performs the same function.
on the head
87.5-108(MHz)
(Europe)
Tuning Range
(Optional)
Note:
* This function is operated by using the
remote control.
* The default setting is Disc Repeat.
87.5-107.9(MHz)
(U.S.A.)
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without prior notice.
Skip backward/forward/F.F
/F.REW the playback
IF Range
10.7MHz
10dBuV
Playing Tracks at Random
20
Press
(
or ) on remote control to
perform fast reward or fast forward. Each
press will change as the following:
Usable Sensitivity
(-30dB)
16
During VCD/CD playback, press RDM
button on the remote control to play any track
at random under the directory which you
select. Press it again to cancel this function.
Signal-to-noise Ratio
Stereo Separation
50dB
2 X
4 X
8 X
16X
30dB 1KHz
20Hz-10KHz
Note:
* This function is operated by using the
remote control.
Note:
Frequency Response
* Press
and
in the monitor performs
the same function.
34
11
Download from Www.Somanuals.com. All Manuals Search And Download.
06
02
Installation
MP3/USB/SD
Skip backward/forward/F.F
/F.REW the playback
Wiring Connection
20
During MP3/USB/SD mode, Press
(
or
(Brown line with
brown head)
(Grey line with
Video Out 2
Video Out 1
Rear Audio Out
yellow head)
) on remote control to perform fast reward
or fast forward. Each press will change as
the following
Subwoofer
(Grey line with
yellow head)
(Light Grey line with
red & white head)
Reverse Video
Input
(Brown line with
yellow head)
(Dark Grey line with
red & white head)
2 X
4 X
8 X
16 X
Front Audio Out
Note:
* Press
and
in the monitor performs
Antenna
the same function.
5
1
4
6
3
On Screen Display
Hold and press OSD button to display
the current time.
2
Note:
This function is operated by using the
remote control only.
*
Orange
Red
Reverse Trigger (+)
Ignition Key
Brown
Pink
Parking Brake (-)
Exit an USB
Illuminating
control
To power
Antenna
Choke
Box
During USB mode, the main unit would
switch to SD or DISC mode, if the previous
status is SD or DISC, otherwise the main
unit would switch to TUNER mode when
exit the USB.
Yellow
Black
Constant 12 Volts
Negative Ground
Blue
Violet/Black
Violet
Rear R
Speaker
Green/Black
Rear L
Speaker
During other modes, the main unit will keep
the previous mode when exit the USB.
Green
Grey/Black
Grey
Front L
Speaker
White/Black
Front R
Speaker
Exit a SD Card
White
Push SD card to exit it.
During SD mode, the main unit would
switch to USB or DISC mode, if the previous
status is USB or DISC, otherwise the main
unit would switch to TUNER mode when
exit the SD card.
1
2
3
Antenna Receptacle
Output Plug(Male)
Output Socket(Female)
4
5
6
Screw Hole
Wire Clip
Fan Window
During other modes, the main unit will keep
the previous mode when exit the SD card..
Note:
*
The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor
after braking the car, but the menu and RCA output are free of it.
If you do not want to use this function, connect it with the negative pole.
Do not connect the pink wire to the battery,otherwise it will use up the power of battery.
12
33
Download from Www.Somanuals.com. All Manuals Search And Download.
06
02
MP3/USB/SD
Installation
Playing a MP3/USB/SD Disc
Number Buttons
Install the Unit
23
Insert a MP3 disc into the slot, the programs
in the disc will be played, if a MP3 disc is
loaded, press SOURCE to start the playback.
Press one of
Number Buttons(0~9) to
select a track to play automatically.
Note:
MainPartsList
Insert an USB into the slot, the programs
in the USB will be played, if there has an
USB, press SOURCE to start the playback.
* This function is operated by using the
remote control.
22
* Press
CLEAR to clear the mistake
Insert a SD card into the slot, the programs
in the card will be played, if there has SD
card, press SOURCE to start the playback.
input.
M4x3 &M5x5
4 Screws Each
Stop Playing
When playing a disc included PIC file, first
Mounting Sleeve x1
Rear Mounting Bolt x1 Harness Rubber x1
18
During MP3/USB/SD playback, Press
to stop the playback.
press
,then press [ ][ ] to select the
18
option.
6
7
Note:
Note:
You can eject a disc by pressing EJECT
button on the base or on the remote
* Press
in the monitor performs the
*
*
same function.
control or
in the monitor.
Selecting Tracks
After inserts USB or SD must wait for 20
seconds to be able to eject the disc.
Connecting Wire x1
Outer Trim Frame x 1
Steel Bar x 1
During MP3/USB/SD mode, firstly press
2
GOTO and the TFT shows:---. Then
Selecting Tracks Fast
23
press
NUMBER BUTTONS to input
Installation Method
DIN Front-Mount
the track s Number to play it ; secondly
press GOTO button, and the TFT shows :
--:-- ,now input the desired time to play
the current track at this point.
DuringMP3/USB/SD playback,press
27
Panel
toplaytheprevious track,Press
toplaynexttrack.
Install twor M5x5 screws on both sides (left and right)
of the lock hook brackets
27
Note:
* Pressing
unit or
Note:
and
and
button on the head
in the monitor also
*
This function is operated by using the remote
contro only.
performs the same function.
Bend these claws
Pause the Playback
Repeat Playing
outward for a tight fit,
if necessary.
During MP3/USB/SD playback, press
to switch between play and pause.
15
During MP3/USB/SD playback , press
Install the unit with four M2 2 screws
RPT to replay the current track, press it
again to cancel this function.
Note:
Note:
Fire Wall
To support the unit
*
Press
in the monitor or
on the head unit
performs the same function.
* This function is operated by using the
remote control.
* The default setting is single Repeat.
Install Outer Trim Frame
32
13
Download from Www.Somanuals.com. All Manuals Search And Download.
05
02
Installation
DVD
---Preferencespage--
Install the Unit
Default
Example showing how to set load factory setting:
Installation Method
Installation using the screw holes at
the sides of the unit.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
Select a position where the screw holes of
the mounting bracket supplied with the car and
the screw holes of the main unit become aligned
(are fitted), and tighten the screws (see 4 at 2
places on each side). And then fasten them to
the car.
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Eng
Eng
Bracketsupplied
toyourcar
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Reset
GoToPreferencePage
LoadFactorySetting
Note:
5
Outer Trim Frame and Mounting Sleeve
1
are not used for installation method.
Dashboard
orConsole
Detach the Unit
1. Remove the outer trim frame.
2. Screw the 4 screws, pull the head unit
out.
14
31
Download from Www.Somanuals.com. All Manuals Search And Download.
05
02
Installation
DVD
---Preferencespage--
Install the Front Panel
A
Detach the Front Panel
Press REL button in the upper rightcorner,
and then the front panel will be folded down.
Put notch
(shown as picture) onto shaft
B
.And then slightly press into the right side.
DiscMenu
Example showing how to set Disc Menu Language:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
Eng
Eng
B
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Spanish
Chinese
Japanese
Korean
Russian
Thai
GoToPreferencePage
PreferredMenuLanguage
A
Parental
Example showing how to set parental control:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Eng
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
R
NC 17
Adult
GoToPreferencePage
SetParentalControl
Password
Example showing how to set password, and the default password is 8888.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Eng
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Change
GoToPreferencePage
ChangePassword
30
15
Download from Www.Somanuals.com. All Manuals Search And Download.
03
05
Common Operations
DVD
---Preferencepage---
Reset the Unit
Setting the Sound Characteristics
Repeatedly press 14 SEL button to select
the desired mode in the following order:
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
TVType
Example showing how to set TV type:
VOL
BAL
FAD
BAS
Release the front panel at first, and then
Press 9 RESET button in the panel with
a pointed object, (such as a ballpoint pen)
to set the unit to initial status.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
TRE
--PreferencePage--
After selecting the desired mode, you can
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Eng
Eng
PAL
Auto
NTSC
adjust the current level by pressing VOL
14
buttons.
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Note:
* When some errors occur on the display,
you can also press RESET button to resume
to normal,and it will erase the clock setting
and some memorized functions.
* This function can only be operated by the
head unit.
Note:
7
* Pressing
button and rotating it on the
head unit also performs the same function.
GoToPreferencePage
SetTVStandard
EQ Setting
Audio
Example showing how to set Audio language:
While listening to the popular music, classic
music or rock music, you can select the
corresponding preset modes to adjust the
Turning the Unit On/Off
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
1
Press PWR button to turn on the unit,
--PreferencePage--
26
sound quality perfectly by using
button.
EQ
press it again, the unit is still in the waiting
status. When insert a disc, the unit will
automatically start playing. Keep pressing it
more than 0.5 seconds to turn off the unit
completely.
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
Eng
Eng
26
Repeatedly pressing EQ button to choose
the following modes in turn:
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Spanish
Chinese
Japanese
Korean
Russian
Thai
POP
OFF
CLASSICAL
ROCK
Note:
The default setting is OFF.
* Pressing POWER button on the head
unit also performs the same function.
GoToPreferencePage
PreferredAudioLanguage
Note:
* During playback status, it will play
automatically after inserting a disc.
* This function is operated by using the
remote control only.
Subtitle
Example showing how to set subtitle language:
Turning Loudness On/Off
(Press
,
or ,thenpressENTER)
--PreferencePage--
Volume Control
(Press
--PreferencePage--
Pressing 25LOUD button activates this
feature. You canpress this button to
increase the low frequency, which can
improve sensitivity for your ears. Pressing
it again to stop this function.
Press 14 VOL+ button to increase the
sound level and press 14VOL- button to
decrease the sound level.
TVType
Audio
Auto
Eng
Eng
Eng
English
French
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Note:
* Rotating
7
on the head unit also performs
Korean
Russian
Thai
Note:
the same function.
* This function is operated by using the
remote control only.
GoToPreferencePage
PreferredsubtitleLanguage
16
29
Download from Www.Somanuals.com. All Manuals Search And Download.
03
05
Common Operations
DVD
--DolbyDigitalSetup--
Clear
Eject a Disc
22
Press
EJ button to eject or insert a disc.
If input some wrong selection, press
CLEAR button to clear it.
Note:
DualMono
Example showing how to set stereo mode:
(Press
* Briefly Pressing on the remote control
also performs the same function.
Note:
,
or ,thenpressENTER)
--DolbyDigitalSetup--
This function is only valid on remote
control.
(Press
*
--DolbyDigitalSetup--
Open the Monitor
DualMono
Dynamic
DualMono
Dynamic
Stereo
Mode Selector
L-Mono
R-Mono
Mix-Mono
Press OPEN button to slant the monitor
or telescopes into.
1
Repeatedly briefly pressing SOURCE
button to select the different modes available.
Note:
Note:
GoToDolbyDigitalSetup
DualMono(1+1)Setup
* Keep pressing on the remote control
also performs the same function.
* The unit is running after the monitor
telescopes into.
* Briefly pressing SOURCE on the head
unit also performs the same function.
Menu Setup Button
Dynamic
Example showing how to set dynamic range compression:
Angle Setting
During MAIN MENU SETUP/DVD MENU
9
1
(Press
,
or ,thenpressENTER)
--DolbyDigitalSetup--
mode, briefly press
SETUP to turn on or
(Press
6
5
Press
and
to adjust the best
to adjust
turn off DVD Menu,press and hold it to turn
on or turn off Main Menu Setup.
--DolbyDigitalSetup--
position of the monitor. Press
DualMono
Dynamic
DualMono
Dynamic
monitor backward by definite angle, press
Note:
to adjust it forward.
3
1
1
4
2
4
Press
MENU on the head unit to turn
on the DVD Menu and Main Menu, and
press to back out the previous menu.
*
Note:
* When adjusting the monitor angle, please
press this button, or the monitor would
be broken.
GoToDolbyDigitalSetup
SetDRCoff
* This function is only operated by using
the head unit.
Infrared Sensor:
8
Receptor on the head unit for the remote
control.
Mute Function
12
Press
output. And
button to shut off the sound
appears on the LCD.
Ejecting a stuck Disc
Press it again to resume to previous volume
level.
During playback, if it can not be played
normally or the disc can not eject, briefly
press SOURCE button to switch to the
radio mode, hold and press the EJ button
3 seconds, the disc will be eject.
Note:
Pressing MUTE on the head unit also
performs the same function.
*
28
17
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
Main Menu
DVD
1.Audio Adjust
--GeneralSetupPage--
Set up Main Menu
After selecting AUDIO, the sub menu will
appear as follows:
When the unit is on, the monitor will display
the menu as follows:
Captions
Example showing how to set captions on/off:
(Press
FM1
CH:1
87.50MHz
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
87.50M
87.50M
108.00M
106.00M
Wide
On
Eng
Off
On
Wide
On
Eng
Off
On
90.00M
98.00M
OSDLang
Captions
ScreenSaver
OSDLang
Captions
ScreenSaver
On
Off
GoToGeneralSetupPage
ClosedCaptions
You can adjustVOLUME, BALANCE, FAD
BASS, TREBLE, For example, press FAD,
the setting menu will appear as follow:
Hold and press SETUP on the remote control
or MENU on the head unit, or press MENU
in the monitor to enter the menu as follows:
ScreenSaver
Example showing how to set Screen Saver on/off:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
--GeneralSetupPage--
VIDEO
AUDIO
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
SOURCE
SYSTEM
FAD F4
EXIT
On
EXIT
Off
GoToGeneralSetupPage
ScreenSaver
This menu includes AUDIO, VIDEO,
SOURCE, SYSTEM, EXIT. Press them in
the monitor to set the desired status.
Press
and
to adjust the desired FAD
level, press EXIT to exit this menu.
Note:
Note:
* Adjusting the other options perform the
same operation.
* Press and hold SETUP or press MENU
on the head unit to set up this menu;
press the monitor to select the option.
18
27
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DVD
Main Menu
2.Video Adjust
3.Source Adjust
--GeneralSetupPage--
After selecting VIDEO, the sub menu will
appear as follows:
In the main menu, press SOURCE in the
monitor, the sub menu will appear as follows:
TVDisplay
Example showing how to set TV Display mode:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Normal/PS
Normal/LB
Wide
On
Wide
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
Wide
EXIT
GoToGeneralSetupPage
SetTVDisplaymode
In this menu you can adjust CONTRAST,
COLOR, TINT, BRIGHT, PICTURE, EXIT.
You can adjustTV, CDC, GPS and AUX to
ON or OFF, press the corresponding button
to set.
If one of them was set OFF, that function is
null. For example, to set the AUX OFF, press
SOURCE can not activate AUX function.
But can not set the current playback OFF.
Picture Adjust
AngleMark
Example showing how to set picture mode:
(Press
Press PICTURE in this menu, it will appear
as follows:
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
Note:
--GeneralSetupPage--
If the item can not be set "ON", then this
model does not contain this function.
*
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
On
Off
OSDLang
Captions
ScreenSaver
Eng
Off
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
4.System Adjust
GoToGeneralSetupPage
SetAngleMark
After selecting SYSTEM, the sub menu will
appear as follows:
EXIT
Press
and
to adjust the size, then
press SAVE to save the setup, press EXIT
to exit this menu.
CLOCK SYS
KEY BEEP
OSDLang
Example showing how to set language mode:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
Note:
(Press
MONI FLEX
* Adjusting the other options perform the
same operation.
--GeneralSetupPage--
English
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
EXIT
French
German
Spanish
Italian
Dutch
Portuguese
OSDLang
Captions
ScreenSaver
Eng
Off
On
OSDLang
Captions
ScreenSaver
Eng
Off
On
In this menu you can adjust CLOCK
SYSTEM, KEY BEEP, MONITOR FLEX
and so on.
GoToGeneralSetupPage
SetOSDLanguage
26
19
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
Main Menu
DVD
Clock System
Changing audio language
(Multi-audio)
Next Setup
Selecting MENU
Press
to display the menu follows, press
1
Selecting Menu: During DVD status,
to display the previous one.
DVD s can provide audio playback with
different language. With DVD s featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
4
press MENU to return to the root
CLOCK SYS
KEY BEEP
menu, all of the chapters will appear
on monitor. You can press 27 or 23
button to select your desired chapter.
6
MONI FLEX
Selection options switch as follows:
2 Selecting Title: During DVD status,
EXIT
3
press
all of the titles will appear on monitor.
You also can press or button to
TITLE to return the title menu,
AUDIO 1
AUDIO 2
AUDIO 3
Press CLOCK SYSTEM in the monitor to
set 12 HOUR or 24 HOUR in this menu.
27
23
EXIT
Note:
select your desired chapter.
*
This function is operated by using the
remote control.
This function only operates with DVD's
Note:
Key Beep
Reverse Pola
The function is only valid on remote
control.
*
*
featuring multi-audio recordings.
2
*
The number in the
mark on a
CLOCK SYS
KEY BEEP
DVD's package indicates the number of
recorded languages/audio systems.
DVD SETUP MENU
MONI FLEX
Briefly press SET UP on remote control
or briefly press
main menu and sub-menu will appear on TFT,
pressing ][ ][ ][ ] on remote co-
MENU on the head unit,
Changing the subtitle language
(Multi-subtitle)
EXIT
EXIT
[
ntrol to select your desired items, then press
ENTER on remote control to confirm. Press
In this menu you can adjust KEY BEEP,
press it in the monitor and select ON or OFF,
the default setting is ON, it means when you
press the keys, they sounded.
Setting REVERSE POLA in this menu.The
signal is +12V when you are backing up a
car, please press BATTERY in the monitor;
if the signal is 0V, please press GROUND.
With DVD s featuring multi-subtitle recor-
to back out. Press
/
on the head
5
dings. You can press SUB-T to switch
unit to chooses left or right direction.
between subtitle languages during playback.
Selection options switch as follows:
Notes:
Monitor Flex
Subwoofer
Subtitles 1
Subtitles 2
Subtitles OFF
* The selections are the preferred options
that will be chosen if they are available
on a disc.If the disc that is inserted does
not have the preferred option then the
discs own preference will be used.
Note:
CLOCK SYS
KEY BEEP
* This function is operated by using the
remote control.
* This function only operates with DVD's
* Regarding SETUP MENU, please refer
MONI FLEX
to the following pages for more details.
featuring multi-subtitle recordings.
* Some functions varies depending on the
types of models or formats of the disc.
2
EXIT
* The number in the
mark on a
EXIT
DVD's package indicates the number of
recorded subtitle languages.
In this menu you can adjust MONITOR
FLEX, press it in the monitor and select
MANUAL or AUTO, the default setting is
AUTO, it means the monitor will flex auto-
matically.
In this menu you can adjust SUBWOOFER,
press it in the monitor and select ON or OFF,
the default setting is ON.
20
25
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DVD
Main Menu
8
Press and hold OSD to display the curr-
ent time.
System Switch
AMS Fullup
Local
During playback mode, Press
remote control to switch to PAL or NTSC
P/N on
Note:
or AUTO system.
This function is operated by using the
remotecontrol only.
*
LOCAL AREA
AUTO
NTSC
LOCAL
GOTO FREQ
PAL
DVD Playback Setting
Note:
2
During DVD mode, press
GOTO button
The function can be operated by selecting
the DVD MENU SETUP.
*
EXIT
EXIT
to set the playing time, when the TFT dis-
play : title/chapter/audio/subtitle/angle
/title time/chapter time/repeat /time disp.
In this menu to set the modes of AMS. When
the setup is ON, the presettable stations are
full, no new one's can be added. When you
select OFF, it will searching continually.
In this menu to search the LOCAL stations,
when selected ON, the strong signal local
stations can be received, when selected OFF,
the week signal out-of-town stations may
be received.
Slow motion playback
Press
[
][ ] to select the options, press
ENTER to set the status. Then press NUM-
During DVD mode, press SLOW to
slow forward or slow backward. Here are
the speeds for this feature:
BER BUTTONS or
[
][ ] to set the
current status.
Press
to display the menu follows, press
Goto FREQ
Note:
1/2
1/4
1/8
1/16
to display the previous one.
*
This function is operated by using the
remote control only.
1/16
1/8
1/4
1/2
Note:
LOCAL AREA
LOCAL
LOCAL AREA
LOCAL
The function is only valid on remote
control.
Changing the viewing angle
(Multi-angle)
*
GOTO FREQ
GOTO FREQ
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
Increase the size of the picture
7
EXIT
can press ANGLE to switch among
9
During DVD mode, Press
ZOOM to
EXIT
viewing angles during playback.
increase the picture in size. Here are the
speeds for this feature. Each press increases
the size until the maximum size is reached.
To select ON, you can using GOTO button
on the remote control to select a station s
frequency directly in radio mode.
Selection options switch as follows:
To set the above options as the same
operation.
ANGLE 1
ANGLE 2
ANGLE 3
2X
3X
4X
Notes:
Local Area
No Change
* This function is operated by using the
remote control only.
* This function only operates with DVDs
featuring multi-angle recordings.
Note:
The function is only valid on remote
control.
*
*
LOCAL AREA
EUROPE
LOCAL
27
To remove the image by pressing button.
U.S.A
* The
indicates it features multi-angle scenes.
The number in the mark indicates
mark on a DVD's package
3
FM ONLY
GOTO FREQ
On Screen Display
3
the number of angles from which scenes
were shot.
* It is invalid to pressing ANGLE during
fast forward/fast reverse or pause.
EXIT
8
During DVD status, press OSD button
the display shows:
You can select EUROPE or USAto search
the stations quickly by your current area,
also, you can select FM ONLYto receive the
FM stations only.
Title elapsed time
Title remain time
Chapter
Chapter
remain time
OFF
elapsed time
24
21
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
Main Menu
DVD
Adjust Screen
Playing a DVD
Stop the playback
During DVD playback, firstly press
14
,
Insert a DVD disc into the slot , the unit
will automatically switch on, if a DVD disc
is loaded, press SOURCE to start the playback.
then press or on the remote control to
replay.
CLOCK SYS
KEY BEEP
Press
Note:
* Press
twice to quit playing completely.
Note:
MONI FLEX
You can eject a disc by pressing EJECT
*
and
in the monitor
button on the base or on the remote
control or
performs the same function.
in the monitor.
EXIT
SAVE
At the beginning of playing DVD, the
monitor will display the menu as follows:
Pause the Playback
During DVD playback, press
(Picture 1)
17
to switch
between play and pause; During stop mode,
press this button to resume playback mode.
Press ADJUST SCREEN to display the
above menu, there are a square button in the
top left corner. Press the square button at
place ,then the button will move to place
, press it at place , it will move to place
, then place , press SAVE at last.
LOCAL AREA
LOCAL
Note:
* Press
in the monitor or on the head
unit performs the same function.
GOTO FREQ
Skip backward/forward/F.F
/F.REW the playback
EXIT
Note:
20
Press
(
or ) on remote control to
This menu appears by touch the monitor.
(Picture 2)
*
Clock Adjust
perform fast reward or fast forward. Each
pressing will change as follow:
DVD SETUP
2X
4X
8 X
16X
During DVD playback, select AV SET will
appear the following menu:
Press
in picture 1 or press in picture 2
to enter the following menu:
Note:
CLOCK
* Press
and
in the monitor also
performs the same function.
00:00:00
Number Buttons
EXIT
CLOCK
23
Press one of
Number Buttons(0~9)
to select a track, it will be played auto-
matically.
Note:
Press CLOCK ADJUST in the monitor to
adjust the clock.
For more details please refer to pages 18
to 19.
To adjust VIDEO ADJUST, a DVD should
be inserted and played normally at first.
*
*
Note:
EXIT
* The function is only valid on remote control.
22
* Press CLEAR to clear the mistake input.
Selecting Tracks Fast
Repeat Playing
21
During DVD playback, first press
15
During DVD playback , press
RPT
on the remote control to perform replaying
function as followings:
to return to the beginning of the current
21
track, press
again within 3 seconds
Title
Chapter
21
to play previous track ,press
to play
next track .
Note:
Off
Note:
* This function is only valid on remote
control.
* Pressing
unit or
and
and
button on the head
in the monitor also
* The default setting is Disc Repeat.
performs the same function.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Black Box Outdoor Kitchen Island CFD42UBF24 User Manual
Bogen Portable Speaker 700286198 User Manual
Bosch Appliances Ventilation Hood DKE96 User Manual
Brother Printer PT 2600 User Manual
Califone Mouse KM TI User Manual
Califone Webcam CW1 User Manual
Carson Smoke Alarm WS 295 53 14V User Manual
Casablanca Fan Company Fan RAS 4 13 04 User Manual
Channel Vision Home Theater System E 1200 User Manual
Chauvet Indoor Furnishings 1VW User Manual