| LIFESTYLE® VS-2   VIDEO ENHANCER   Owner’s Guide   REVIEW DRAFT 4 (9/18/06)   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   SAFETY INFORMATION   CONTENTS   Please read this installation guide   Please take the time to follow this installation guide carefully. It will help you set   up and operate your system properly, and enjoy all of its advanced features. Save   your installation guide for future reference.   Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   Connecting the VS-2 to Your Media Center . . . . . . . . . . . . . . . . . . . . . .   Your TV Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   Using an HDMI TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4 6 7 8 WARNING: To reduce the risk of fire or electric shock, do not expose the system to   rain or moisture.   Using a Component Video TV Connection . . . . . . . . . . . . . . . . . . . . . . . 10   Using a S-Video TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12   Using a Composite Video TV Connection . . . . . . . . . . . . . . . . . . . . . . . . 14   Program Recording Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16   Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17   Mounting Your VS-2 on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20   Maintaining Your VS-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21   WARNING: This apparatus shall not be exposed to dripping or splashing, and   objects filled with liquids, such as vases, shall not be placed on the apparatus. As   with any electronic products, use care not to spill liquids in any part of the system.   Liquids can cause a failure and/or a fire hazard.   The lightning flash with arrowhead symbol, within an equilateral triangle,   is intended to alert the user to the presence of uninsulated, dangerous   voltage within the system enclosure that may be of sufficient magnitude   to constitute a risk of electric shock.   The exclamation point within an equilateral triangle, as marked on the   system, is intended to alert the user to the presence of important oper-   ating and maintenance instructions in this installation guide.   CAUTION: No naked flame sources, such as lighted candles, should be placed on   the apparatus.   This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage   Directive 73/23/EEC. The complete Declaration of Conformity can be found at   ©2006 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise   used without prior written permission. All trademarks referenced herein are property of Bose Corporation.   HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks   of HDMI Licensing LLC.   3 Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Introduction   About your LIFESTYLE® VS-2 video enhancer   TV   The LIFESTYLE® VS-2 video enhancer allows you to connect more than one audio/video   device to your LIFESTYLE® home entertainment system. With this accessory installed, a sin-   gle button press selects the source video and audio at the same time.   Video out   to TV   Features and benefits   • Incorporates HDMITM (High Definition Multimedia Interface) technology to help maximize   your home theater experience.   VS-2   • Provides HDMI, component, S-Video, and composite video connections for your TV,   cable/satellite box, VCR or other A/V input devices.   Video   • Converts video inputs to the highest quality video output supported by your TV.   • Compatible with HDTV and progressive scan TV formats.   How it fits into your LIFESTYLE system   Video   Video   Video outputs from all your A/V devices, such as your cable/satellite box and VCR, connect   to the VS-2, but the audio outputs from these devices connect to the media center. The   VS-2 video output connects to your TV. When you select a source, such as your cable box   (CBL-SAT), the media center selects the cable box audio and directs the VS-2 to pass the   cable box video through to your TV.   Video   VCR   CBL/SAT   AUX   Audio   Audio   Audio   IMPORTANT: Software update required!   Your VS-2 comes with a software update disc. After setting up the VS-2, you must   load this CD into the media center disc player and allow it to update your system.   Refer to “Updating the system software” on page 17.   LIFESTYLE media center   4 Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Unpacking   Carefully unpack the VS-2 video enhancer. Check to be sure   your system includes the parts shown on this page. Save all   packing materials in case you need to repack and transport   your product.   VS-2 video enhancer   Software update disc   Owner’s   guide   If any part of the product appears damaged, do not attempt to   use it. Notify Bose or your authorized Bose dealer immedi-   ately. For Bose contact information, refer to the address sheet   included in the carton.   WARNING: To avoid danger of suffocation, keep the   plastic bags out of the reach of children.   Quick setup   guide   VS-2 cable   Finding a location for the VS-2   You can position the VS-2 on a shelf behind your media   center or behind your TV, or you can mount it on the back of   an entertainment center or on a wall. To mount it on a wall,   see “Mounting Your VS-2 on a Wall” on page 20.   HDMI-to-HDMI cable   If you need additional cables   Your VS-2 includes one HDMI-to-HDMI video cable, but you may need additional cables to set up the VS-2 with   your LIFESTYLE® system. To determine if you need any additional cables, please read this guide before you   begin the actual setup. You can purchase additional cables from your Bose dealer or local electronics retailer.   For your records   Now is a good time to find the serial number on the bottom of the VS-2 video enhancer. Please record it here.   This provides easy access to this number if you ever need to contact Bose® Customer Service.   Serial number: ________________________________ Purchase date: ________________________   Dealer name:__________________________________ Dealer phone: _________________________   Please keep your sales receipt with this owner’s guide.   5 Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Connecting the VS-2 to Your Media Center   Preparation   Media center rear panel   When setting up a LIFESTYLE® system with the VS-2, the media center   power supply plugs into the VS-2 instead of the media center.   • If you are setting up the VS-2 and your LIFESTYLE system at the   same time, find the media center power supply in the LIFESTYLE sys-   tem carton before you begin.   • If you are adding the VS-2 to an existing LIFESTYLE system, turn   off your LIFESTYLE system, wait 30 seconds, and unplug the media cen-   ter power supply from the wall outlet. Then, disconnect the power supply   from the rear panel of the media center. Also, remove any video cables   from the Video OUT and Video IN connectors on the media center.   Media center power supply   1 2 3 4 Connecting the VS-2 to your media center   • Connect the 4-connector end of the VS-2 cable to your media center:   1 Insert the Serial Data plug into the Serial Data connector.   2 Insert the DC Power plug into the DC Power connector.   3 Insert the Composite plug into the Composite Video OUT connector.   Insert the S-Video plug into the S-Video OUT connector.   VS-2 end panel   4 • Connect the other end of the VS-2 cable to the VS-2 end panel:   5 Insert multi-pin plug into the Media Center connector.   VS-2 cable   7 5 6 Insert the DC Power plug into the DC POWER Out connector.   • Connect the media center power supply to the end panel of the VS-2:   6 7 Insert the DC power cable from the media center power supply into the   DC POWER In connector.   Note: Straighten the DC power cord from the media center power supply and   from the VS-2 to the media center as much as possible. This cord is used as   the antenna for your LIFESTYLE system remote control.   WARNING: The VS-2 must be used only with the media center power supply   supply that came with your LIFESTYLE® DVD home entertainment system.   6 Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Your TV Connection Options   Identifying your TV connectors   Your TV may have some or all of the video input connectors   shown on the right. Each type of video connector provides   a different level of video image quality.   HDMI   Component   S-Video   Composite   Examine the rear panel of your TV and determine whether it   has HDMI, component, S-Video, or composite video input   connectors. For additional instructions, refer to the owner’s   guide that came with your TV.   Best quality   Better quality   Good quality   Standard quality   DVI   You may have a TV that has a DVI connector, but not an HDMI   connector. In this case, you can still use an HDMI connection by   using a DVI-to-HDMI cable adapter or a DVI-to-HDMI cable.   Choosing the TV connector you   will use   1. Using the table on the right, choose the available TV   video connector that provides the highest possible   video quality.   Video   TV Video   Connection   instructions   Check   One   Quality   Connector   Cable Type   Best   HDMI   2. Make sure you have the correct cable on hand. An HDMI   Supplied with   the VS-2   cable is provided with the VS-2.   Go to page 8.   3. Go to the page listed for instructions on making the con-   nections to your TV and other A/V devices.   Better   Component   S-Video   4. As a reminder, place a check mark in the table to indicate   Not supplied   your choice.   Go to page 10.   Go to page 12.   Go to page 14.   Good   Supplied   with your   LIFESTYLE   system   Standard   Composite   Supplied   with your   LIFESTYLE   system   7 Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Using an HDMI TV Connection   Connecting the VS-2 HDMI output to your TV   To connect your TV to the VS-2 using the supplied HDMI cable, do the following:   TV   1. Plug one end of the HDMI cable into the HDMI connector on the rear of your   TV.   2. Plug the other end of the HDMI cable into the Video OUTPUT HDMI connector   on the VS-2.   3. Go to page 9 for instructions on connecting other A/V devices to the VS-2.   VS-2   8 Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   VS-2   Choosing connection types for your A/V devices   1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.   2. In the following table, choose the type of available video connector that provides the highest possible video   quality. We recommend using an HDMI connection if it is available. Place a check mark in the table for the   connector type used for each of your A/V devices.   If any of your A/V devices do not have an HDMI connector, you can use any other   type of connection. Remember, the VS-2 converts these up to HDMI format.   Video   Quality   Video   Connector   AUX   (Other)   VCR   CBL-SAT   Not   available   on VS-2   Best   HDMI   Better   Component   Good   S-Video   Standard   Composite   Connecting your A/V devices to the VS-2   1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V device.   2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2.   3. Refer to your LIFESTYLE® system installation guide for information on making audio connections.   DO NOT USE   9 Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Using a Component Video TV Connection   Connecting the VS-2 component video output to your   TV   You need to obtain a component video cable from Bose or your local electronics dealer to   complete this connection.   TV   To connect your TV to the VS-2 using a component video cable (not supplied), do the   following:   1. Plug one end of the component video cable into the component connectors on the rear   of your TV. Be sure to match the color of each plug to the color of each connector.   2. Plug the other end of the component video cable into the Video OUTPUT Component   connectors on the VS-2. Again, be sure to match the color of each plug to the color of each   connector.   3. Go to page 11 for instructions on connecting other A/V devices to the VS-2.   VS-2   10   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   VS-2   Choosing connection types for your A/V devices   1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.   2. In the following table, choose the type of available video connector that provides the highest possi-   ble video quality. We recommend using a component connection if it is available. Place a check mark in   the table for the connector type used for each of your A/V devices.   If any of your A/V devices do not have component video connectors, you can use   either an S-Video or Composite connection. Remember, the VS-2 converts either   of these up to component video format.   Video   Quality   Video   Connector   AUX   VCR CBL-SAT (Other)   Better   Component   Good   S-Video   Standard   Composite   Connecting your A/V devices to the VS-2   1. Plug one end of the video cable into the appropriate video output connector(s) on your A/V device. If   you are making a component connection, be sure to match the color of the plug to the color of the   connector.   2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2. Again,   if you are making a component connection, be sure to match the color of the plug to the color of the con-   nector.   3. Refer to your LIFESTYLE® system installation guide for information on making audio connections.   11   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Using a S-Video TV Connection   Connecting the VS-2 S-Video output to your   TV   TV   You can use the S-Video cable included with your LIFESTYLE® system to   make this connection.   To connect your TV to the VS-2 using an S-Video cable, do the following:   1. Plug one end of the S-Video cable into the S-Video connector on the rear   of your TV.   2. Plug the other end of the S-Video cable into the Video OUTPUT S-Video   connector on the VS-2.   3. Go to page 13 for instructions on connecting other A/V devices to the VS-2.   VS-2   12   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Choosing connection types for your A/V devices   If you connected your TV to the VS-2 using an S-Video cable, you can use only an S-Video or Composite con-   nection for your A/V devices even though a device may have HDMI or component video output connectors.   VS-2   1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.   2. In the following table, choose the type of video connector that provides the highest possible video quality.   We recommend using an S-Video connection if it is available. Place a check mark in the table for the connec-   tor type used for each of your A/V devices.   If any of your A/V devices do not have an S-Video connector, you can use a   Composite connector. Remember, the VS-2 converts this up to S-Video format.   Video   Quality   Video   Connector   AUX   (Other)   DO NOT USE   VCR   CBL-SAT   Good   S-Video   Standard   Composite   DO NOT USE   Connecting your A/V devices to the VS-2   1. Plug one end of the video cable into the appropriate video output connector on the rear of your A/V   device.   2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2.   3. Refer to your LIFESTYLE® system installation guide for information on making audio connections.   DO NOT USE   13   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Using a Composite Video TV Connection   Connecting the VS-2 composite video output   to your TV   TV   You can use the composite video cable included with your LIFESTYLE® system to   make this connection.   To connect your TV to the VS-2 using a composite video cable, do the following:   1. Plug one end of the composite video cable into the composite video connec-   tor on the rear of your TV.   2. Plug the other end of the composite video cable into the Video OUTPUT Com-   posite connector on the VS-2.   3. Go to page 15 for instructions on connecting other A/V devices to the VS-2.   VS-2   14   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Connecting your A/V devices to the VS-2   If you connected your TV to the VS-2 using a composite video cable, you can use   only a Composite or S-Video connection for your A/V devices even though a   device may have HDMI or component video output connectors.   VS-2   1. Plug one end of the video cable into the appropriate video output connector   on the rear of your A/V device.   2. Plug the other end of the video cable into the appropriate Video INPUT connec-   tor on the VS-2.   3. Refer to your LIFESTYLE® system installation guide for information on making   audio connections.   DO NOT USE   DO NOT USE   DO NOT USE   15   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Program Recording Connections   Connecting your cable/satellite box to   your VCR/DVR   To record programs from your cable or satellite service, you can connect   your cable/satellite box to your VCR or DVR. The diagram on this page   is an example of how this equipment may be connected.   Before you start, make sure that your cable/satellite box and VCR/DVR   have the necessary input and output connectors available.   Cable/satellite audio   to the media center   Cable/satellite video to the VS-2   2 1 1 Connect an unused video output on your cable/satellite box to an   unused video input on your VCR/DVR. Choose the connection   type that provides the highest level of image quality. Refer to   page 7.   2 Connect an unused audio output on your cable/satellite box to an   unused audio input on your VCR/DVR.   VCR/DVR audio to   the media center   VCR/DVR video   to the VS-2   VS-2   Recording programs   Using the connection method in the example diagram, you do not need   to select the CBL-SAT source in order to record the program. If you   wish, you can listen to another source while recording.   LIFESTYLE® media center   16   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Operating Information   Updating the system software   IMPORTANT: Software update required!   1. Turn on your LIFESTYLE® system and select the CD/DVD source.   2. Load the software update disc into the media center disc player.   3. Wait for the display window of the media center to indicate when it is done.   Your VS-2 comes with a software update disc. To enable   the media center to operate with the VS-2, you must load   this CD into the media center disc player and allow it to   update your system.   New System menu items   When the VS-2 is connected to your LIFESTYLE system, the following new items will appear in the System menu.   Video options   New Item   Possible Settings (Factory/default settings in bold type)   Widescreen TV   No.....................Tells your LIFESTYLE system that it is connected to a 4:3 TV.   Yes....................Tells your LIFESTYLE system that it is connected to a 16:9 (widescreen) TV.   Video Resolution   (only for HDMI TV   connection)   Adjustable ......Allows your LIFESTYLE system to select the highest possible resolution setting supported by   your TV. Refer to Video Resolution in “New Settings menu items” on page 18.   Fixed.................Prohibits any change to video resolution.   Persistent Video   Disabled..........Removes video from your TV screen when switching from your selected video source to an   audio source.   Enabled.............Allows the video from your selected source (CBL-SAT, VCR, or AUX) to remain on your TV   screen when switching from this source to an audio source.   Settings on TV   Yes ...................Allows the Settings menu for the TV, CBL-SAT, VCR, and AUX sources to appear on your TV   screen as well as on the media center display window.   No.....................Allows the Settings menu for the TV, CBL-SAT, VCR, and AUX sources to appear only on the   media center display window.   Audio options   New Item   Possible Settings (Factory/default settings in bold type)   CBL-SAT/VCR Audio   (only for HDMI TV   connection)   Bose 5.1 ..........Allows you to hear 5.1-channel surround sound from your LIFESTYLE system when the   selected source is CBL-SAT or VCR. Recommended setting – should not be changed.   TV Stereo ..........Tells the VS-2 to send two-channel digital audio from your cable/satellite box or VCR to your   TV through the HDMI cable. The LIFESTYLE system speakers are silent.   17   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   New Settings menu items   When the VS-2 is connected to your LIFESTYLE® system, the following new items appear in the settings menus.   New Menu Item Description Possible Settings (Factory/default settings in bold type)   Audio Delay   Changes the amount of delay between 0 (no delay), 1, 2, 3, 4, 5, 6, 7, 8 (maximum delay)   audio and video. Used to synchronize   the audio with the action when viewing   audio/video program content.   Video Resolution   Lists output video resolutions sup-   ported by your TV when it is connected   to the HDMI output of the VS-2. The   highest possible resolution is listed as   the default setting and remains   480/576p (lowest quality), 720p, 1080i, 1080p (highest quality)   selected unless you change it.   Available only when the Video Resolu-   tion option in the System menu is set   to Adjustable.   Image View   Modifies the image on your TV screen. Gray Bars....Adds a vertical gray bar to left and right side of image.   Stretch ........Stretches the image horizontally to fit the screen.   Zoom...........Image size is increased horizontally and vertically to fit the screen.   Normal.......Image is not changed.   SD Progressive   Scan   For standard definition video, deter-   mines whether interlaced or progres-   sive video is sent to your TV.   Off ...............Sends interlaced video (480i or 576i) to your TV.   On...............Sends progressive video (480p or 576p) to your TV.   Available only when your TV is con-   nected to the VS-2 using a component   video cable.   18   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Switching sources   Adding the VS-2 to your system setup greatly simplifies source selection. Just press the remote   button (CD/DVD, VCR, CBL/SAT, or AUX) for the source you want to use. If you select one of the   sources connected to the VS-2, be sure the source is turned on.   System menu – Remote Control options   Remote Control   Selecting TV channels   When the VS-2 is connected to your LIFESTYLE® system, the remote changes channels on the   source selected by the TV Control setting (CBL-SAT, VCR, TV or AUX) in the System menu under   Remote Control options. This means that when you select the TV source on the remote, you see   and hear the TV channel coming from your TV Control selection. For example, if you set TV Con-   trol to CBL-SAT and press the TV source button on your remote, you will see and hear the pro-   gram on the selected channel of your cable or satellite box.   AUX Device:   AUX Brand:   AUX Code:   TV Control:   Remote Version   IR Control:   AUX   VCR   CBL/SAT   TV   If TV Control is set to TV (default setting), your TV screen goes blank when selecting the TV   source unless you enable the Persistent Video option (see “New System menu items” on page 17).   If your TV screen is blank, the media center displays CHOOSE TV INPUT to remind you to select   the correct video input on your TV.   Choose the device that you have connected to the TV Audio IN jacks.   Watching video from one source while listening to audio from   another   navigate   select   Normally, when you switch to an audio source from a video source, your TV screen goes blank. To   change this so the video source remains on your TV screen, go to the System menu and change   the Persistent Video option setting to Enabled.   Enabling Persistent Video allows you to continue viewing the video portion of a program while lis-   tening to the audio from another source, such as FM or AM radio. For example, you can watch a   ball game on your TV while listening to the broadcast audio of the same ball game from a local   radio station.   Media center display – blank TV message   TV   CHOOSE TV INPUT   19   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Mounting Your VS-2 on a Wall   Required tools   Install two screws eight inches apart.   Leave ¼ inch (6 mm) between wall   surface and screw head.   1 Recommended hardware   For solid wood   No. 8 x 1½-inch   (M4 x 36 mm)   wood screws   1 8 -inch (3.5 mm) drill bit   Position the VS-2 mounting holes over the   screws so that it is flush with the wall.   Lower the VS-2 onto the screws   to lock it in place.   3 2 For wallboard   No. 8 (M4)   wall anchor   Use drill size   specified for type   of wall anchor   used.   No. 8 x 1½-inch (M4 x 36 mm)   wood or machine screws (depends   on type of wall anchor)   20   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Maintaining Your VS-2   Cleaning   • Use only a soft, dry cloth to clean the outside of the VS-2.   • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.   • Do not allow liquids to spill into any openings.   • Do not use any sprays near the VS-2.   Troubleshooting   Problem   What to do   System will not turn on   • Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media   center” on page 6).   • Make sure the media center power supply is plugged into an AC receptacle.   No picture on TV   • • If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 17.   Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media   center” on page 6).   • • Make sure you connected your TV to the TV output connector on the VS-2.   Make sure you have selected the correct video input on your TV.   The wrong picture appears   on my TV for the source I   selected   • • • • If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 17.   Make sure your sources are connected to the appropriate VS-2 inputs.   Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector.   Make sure you have selected the correct video input on your TV.   Some sources do not   appear on my TV   • • Make sure your sources are connected to the appropriate VS-2 inputs.   Make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept.   21   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   Technical information   Dimensions   15.6" W x 4.8" D x 1.6" H   (39.55 cm x 12.07 cm x 4.0 cm)   VS-2 power rating   9 W   Video inputs   (2) HDMI (CBL-SAT and VCR)   (3) Component   (3) S-Video   (3) Composite   Video output   HDMI   Component   S-Video   Composite   Weight (approximate)   2.5 lb (1.13 kg)   Finish   Diecast aluminum   Contacting Customer Service   If you need help solving problems while setting up this product, contact Bose® Customer Service.   See the address and phone number list included with your system.   22   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   Other Rights:   Limited Warranty   What is covered:   EXCLUSIVE REMEDY:   THIS LIMITED WARRANTY IS FULLY TRANSFERABLE PROVIDED THAT THE CURRENT OWNER   FURNISHES THE ORIGINAL PROOF OF PURCHASE FROM AN AUTHORIZED BOSE DEALER. THE   MAXIMUM LIABILITY OF BOSE SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY   YOU FOR THE PRODUCT. IN NO EVENT SHALL BOSE BE LIABLE FOR SPECIAL, INCIDENTAL,   CONSEQUENTIAL OR INDIRECT DAMAGES. SOME PLACES DO NOT ALLOW LIMITATIONS ON THE   EXCLUSION OR LIMITATION OF RELIEF, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT   DAMAGES OF THE LIMITATION OF LIABILITY TO SPECIFIED AMOUNTS, SO THE ABOVE LIMITA-   TIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.   All parts defective in material and workmanship. This limited warranty for the LIFESTYLE® VS-2 Video   Enhancer covers the functionality of the system for its normal, intended use as specified in the   Owner’s Guide and does not cover a malfunction that has resulted from improper or unreasonable use   or maintenance, accident, excess moisture, improper packing, lightning, power surges, or unautho-   rized tampering, alteration or modification while not under the control of Bose. Bose® systems are not   designed to be used in every environment, so please review your Owner’s Guide.   WHERE PERMITTED, THE PROVISIONS OF THIS LIMITED WARRANTY ARE IN LIEU OF ANY OTHER   WRITTEN WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY   WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.   Notwithstanding the above, in the United States, where applicable, if you qualify as a “consumer”   under the Magnuson-Moss Warranty Act, then you may be entitled to any implied warranties allowed   by law for the period of the express Limited Warranty as set forth below. Some states do not allow lim-   itations on how long an implied Limited Warranty lasts, so the above limitation may not apply to you.   OTHER CONDITIONS:   FOR YOUR BENEFIT, WE RECOMMEND THAT YOU RECORD YOUR SERIAL NUMBERS(S), FOUND   ON THE PRODUCT(S), AND OTHER PURCHASE INFORMATION, AND KEEP IT WITH YOUR PER-   SONAL RECORDS ALONG WITH PROOF OF PURCHASE. IF NECESSARY, THIS INFORMATION   WILL ALLOW US TO BETTER SERVE YOUR NEEDS.   THIS LIMITED WARRANTY GIVES YOU SPECIFIC RIGHTS SUBJECT TO SPECIFIED CONDITIONS.   YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH APPLY TO THE PRODUCT YOU HAVE   ACQUIRED. THESE LEGAL RIGHTS VARY FROM STATE TO STATE OR COUNTRY TO COUNTRY.   SOME PLACES DO NOT ALLOW THE EXCLUSION, RESTRICTION OR MODIFICATION OF CERTAIN   IMPLIED RIGHTS OR THEIR EFFECT. IN THOSE SITUATIONS THIS LIMITED WARRANTY WILL ONLY   APPLY TO THE EXTENT THAT THE APPLICABLE LAW ALLOWS. OTHER LAWS PROVIDE YOU WITH   A STATUTORY CLAIM AGAINST THE SELLER.   For how long:   In countries where the duration of the warranty is not determined by statute, the Bose Limited War-   ranty lasts one year from the purchase date. For countries where minimum warranty terms are deter-   mined by statute, the warranty term is the longer of the statutory period or the term listed above.   What we will do:   At our option, we will repair or replace any defective parts within a reasonable period of time and free   of charge.   The laws of your state or country may provide you with legal claims against the seller or manufacturer   of this product. The Limited Warranty does not affect those rights.   How you can obtain warranty service:   Remedies:   1. You can ship the system to either a Bose Service Agency or to Bose directly with a proof of   The provisions of this Limited Warranty are in lieu of any other warranties or conditions, except those   provided by law. This Limited Warranty does not affect any legal rights provided to you by law and   does not preclude any legal remedy you may have under the law.   purchase from an authorized dealer. Please:   A. Properly and carefully pack the product for shipping. If you need a carton for shipping,   contact Bose for a new carton   This Limited Warranty is void if the label bearing the serial number has been removed or defaced.   B. Please contact Bose to get a return reference number. Place this number prominently on   the outside of the carton.   C. Label and ship the product to the appropriate Bose location.   4. You can return the system with proof of purchase from an authorized dealer to a Bose Service   Agency or directly to Bose. Proof of purchase is not required where it is excluded by statute.   23   Download from Www.Somanuals.com. All Manuals Search And Download.   Svenska   Nederlands   Italiano   Français   Español   Deutsch   Dansk   English   24   Download from Www.Somanuals.com. All Manuals Search And Download.   English   Dansk   Deutsch   Español   Français   Italiano   Nederlands   Svenska   25   Download from Www.Somanuals.com. All Manuals Search And Download.   ©2006 Bose Corporation, The Mountain,   Framingham, MA 01701-9168 USA   292564 AM Rev.00   REVIEW DRAFT 4 (9/18/06)   Download from Www.Somanuals.com. All Manuals Search And Download.   |