Bosch Appliances Washer Dryer WAP24201UC User Manual

en-us Use and care manual  
Washer  
WAP24201UC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
e
n
u
s
U
s
a
n
d
c
a
r
a
n
u
a
l
Your washing machine is intended for ........................ 5  
Dimensions and clearances required .......................... 8  
Laundry detergents and additives ............................. 18  
Before doing any laundry with your washing  
STATEMENT OF LIMITED PRODUCT WARRANTY ... 33  
Additional information on products, accessories,  
replacement parts and services can be found at  
www.bosch-home.com and in the online shop  
4XHVWLRQV"  
ꢀꢉꢊꢂꢂꢉꢁꢇꢇꢉꢆꢁꢂꢇ  
ZZZꢈERVFKꢉKRPHꢈFRP  
ꢀꢁꢂꢀꢃ0DLQꢃ6WUHHWꢄꢃ6XLWHꢃꢅꢂꢂ  
,UYLQHꢄꢃ&$ꢃꢁꢆꢅꢀꢇ  
:HꢃORRNꢃIRUZDUGꢃWRꢃKHDULQJꢃIURPꢃ\RXꢋ  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important information  
Purchase information  
Customer service  
Your washer does not require any special care other than  
the maintenance and care mentioned in this manual. If  
you have a problem with your washer, please consult  
Please take a moment to record the following basic  
information about your new Bosch washer.  
This information will be helpful in the event you need to  
contact Customer Service or would like to order  
accessories or replacement parts.  
This may save you money. If a technician comes out to  
advise you of information that is in the Troubleshooting  
table you may be charged, even if your washer is still  
under warranty.  
(ꢀ1Uꢁ  
)'  
If service becomes necessary, contact your dealer or  
installer or an authorized service center. Do not attempt  
to repair the appliance yourself. Any work performed by  
unauthorized personnel may void the warranty.  
If you are having a problem with your washing machine  
and are not pleased with the service you have received,  
please follow these steps:  
1. Contact your installer or the Authorized Service  
Contractor in your area and explain to them why you  
are not satisfied. This will usually correct the problem.  
2. If after working with your installer or service technician  
the problem still has not been resolved to your  
satisfaction, please let us know either by writing to us  
at:  
BSH Home Appliances  
1901 Mainstreet, Suite 600  
Irvine, CA 92614  
The E-Nr. (model number) and the FD (serial) number  
are found on the rating plate label.  
or calling us at:  
1-800-944-2904  
see illustration  
The model number includes the slash and a two digit  
number (eg: "/27"). Please be sure to include the final 2  
digit number when filling in your model number. This  
helps make sure any parts you may need are correctly  
matched to your specific machine.  
When writing or calling please have the following  
information available:  
E-Nr. (model number, example: WTVC3300UC/27)  
FD (serial) number  
Date of Purchase:___/___/_____  
Where Purchased:___________________________  
E-Nr. :_________/____ (ex: WFVC5330US/27)  
FD :_______-_______ (ex: FD 9005| 90001)  
Date of Original Purchase (receipt required)  
Date Problem Occurred  
Explanation of Problem  
If writing, please also include a daytime telephone  
number and a copy of the sales invoice.  
When calling Customer Service, please be ready to  
provide the model number E-Nr. and FD (serial) number.  
This information will help provide the best support for  
your washer.  
Additional information is available at our website.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Your washing machine is intended for  
Only household use and in a non-commercial  
The washer can be operated by people with reduced  
environment.  
physical, sensory or mental capabilities, and by people  
with little experience or knowledge if they are  
supervised or were trained by a responsible person.  
Household use only washing machine-washable  
textiles  
Children may not do any laundry without supervision.  
Keep pets away from the washer.  
Washing with common cold and hot (maximum  
140 °F/60 °C) tap water and commercially available  
detergents and cleaning products suitable for use in  
washing machines.  
Set-up conditions:  
Ambient temperature: 32-104 °F/0-40 °C  
Relative humidity: under 95%  
We recommended HE (High efficientcy) detergents  
because they are designed to deliver optimum  
performance from your front-loading washer. Not  
using HE detergent could cause problems such as  
oversudsing, extended cycle periods, or a decrease  
in wash performance.  
Installation by qualified installers.  
Installation in accordance with all regulatory  
requirements; if in doubt have the appliance installed  
by a specialist familiar with these requirements.  
Read the use and set-up instructions and all other  
information included with the washer and act  
accordingly.  
NOTICE: Do not use chlorine bleach!  
When measuring all detergents/stain removers/  
laundry care products be sure to follow the  
manufacturer's instructions.  
Keep documents for future use.  
Importance and meaning of symbols  
Important safety information is contained in this manual  
and on the warning labels located on your washer.  
Standard symbols and headings are used to identify  
areas where you should take precautions to avoid injury  
or damage. Please take a moment to become familiar  
with each of these symbols and what they mean before  
proceeding.  
9
WARNING  
WARNING  
This indicates that death or serious injuries may  
occur as a result of non-observance of this warning.  
9
CAUTION  
CAUTION  
This indicates that minor or moderate injuries may  
occur as a result of non-observance of this warning.  
NOTICE: This indicates that damage to the appliance or  
property may occur as a result of non-observance of this  
warning.  
Tip: This symbol is used to draw the user's attention to  
important matters.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9 IMPORTANT SAFETY INSTRUCTIONS  
READ AND SAVE THESE INSTRUCTIONS  
S
N
I
Y
T
E
F
A
S
T
N
A
T
R
O
D
P
A
M
E
RI  
D
N
A
E
V
A
S
E
S
E
H
T
S
N
O
I
T
C
U
R
T
S
N
I
Always unplug the washing machine from the power  
supply before attempting any service. Disconnect the  
power cord by grasping the plug, not the cord.  
Do not machine wash fiberglass materials (such as  
curtains and window coverings that use fiberglass  
materials). Small particles may remain in the washing  
machine and stick to fabrics in subsequent wash loads  
causing skin irritation.  
WARNING  
When properly cared for, your new appliance has been  
designed to be safe and reliable. Read all instructions  
carefully before use. These precautions will reduce the  
risk of burns, electric shock, fire, and injury to persons.  
When using appliances, basic safety precautions must  
be followed, including those in the following pages.  
Do not install or store the washer where it will be  
exposed to the weather. Hoses and internal parts may  
be damaged if exposed to freezing temperatures.  
Examine the appliance after unpacking it. In the event of  
transport damage, do not plug it in.  
Do not use the washing machine if it has a worn power  
cord or loose plug.  
The washing machine must only be used for its  
WARNING  
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,  
SERIOUS INJURY OR DEATH WHEN USING YOUR  
WASHING MACHINE, FOLLOW BASIC PRECAUTIONS  
INCLUDING THE FOLLOWING  
Bosch washers are provided with an Operating, Care  
and Installation Instruction manual. Read and  
understand all instructions before using the washing  
machine.  
Do not wash articles that have been previously  
cleaned, washed, soaked, or spotted with gasoline, dry  
cleaning solvents, other flammable or explosive  
substances as they give off vapors that could ignite or  
explode.  
intended purpose.  
Always  
follow  
the  
fabric  
care  
instructions  
recommended by the clothing manufacturer.  
Make sure all water connections to the washing  
machine have shut-off valves that are readily  
accessible during normal operation of the washer. Turn  
off both valves during periods in which the washer is  
not in use and before leaving for extended periods  
such as vacations to reduce the risk of water damage  
in the event of a leak. Turn the valves back on prior to  
resuming use of the washer.  
Do not operate the washing machine if parts are  
missing or broken.  
Do not add gasoline, dry cleaning solvents, or other  
flammable or explosive substances to the wash water.  
These substances give off vapors that could ignite or  
explode.  
Do not operate the washing machine until you are sure  
that:  
- the washing machine has been installed according  
to the Installation Instructions.  
Under certain conditions hydrogen gas may be  
produced in a hot water system that has not been used  
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.  
If the hot water system has not been used for this  
length of time, turn on all hot water faucets and let the  
water flow out of each faucet for several minutes before  
using the washing machine. This will release any  
accumulated hydrogen gas. As the gas is flammable,  
do not smoke or use an open flame while carrying out  
this procedure.  
- all water, drain, power and grounding connections  
are in compliance with all local regulations and/or  
other applicable regulations and requirements.  
See the installation instructions in this manual for  
grounding requirements.  
Before the appliance is removed from service or  
discarded, remove the door to prevent children from  
playing or hiding inside. Also remove the power cord/  
plug.  
Do not allow anyone to climb, lean or hang on any part  
of the washer including any protruding components  
such as the appliance door or a pullout shelf.  
Use caution when draining hot water from the washer  
drum such as during pump maintenance or when using  
the emergency door open procedure.  
Do not reach into the appliance if the wash drum is  
moving.  
Do not tamper with the controls.  
Do not repair or replace any part of the appliance or  
attempt any service unless specifically recommended  
in the user manual or in published user repair  
instructions that you understand and have the skills to  
carry out.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9 IMPORTANT SAFETY INSTRUCTIONS  
READ AND SAVE THESE INSTRUCTIONS  
S
N
I
Y
T
E
F
A
S
T
N
A
T
R
O
D
P
A
M
E
RI  
D
N
A
E
V
A
S
E
S
E
H
T
S
N
O
I
T
C
U
R
T
S
N
I
WARNING  
WARNING  
WARNINGS FOR CHILDREN  
STATE OF CALIFORNIA PROPOSITION 65 WARNINGS  
Do not allow children to play on or in the appliance.  
Close supervision of children is necessary when the  
appliance is used near children.  
This product contains chemicals known to the State of  
California to cause cancer, birth defects or other  
reproductive harm.  
Make sure to utilize all child lock/safety features of your  
appliance, and be sure to turn the appliance Off when  
not in use.  
SAVE THESE INSTRUCTIONS!  
Appliances are not intended for use by children,  
however when children become old enough to operate  
the appliance, it is the responsibility of the parents or  
legal guardians to ensure they are instructed in safe  
practices by qualified persons.  
Keep These Instructions for Future Reference  
In case of change of ownership, manual should be  
conveyed with the washer.  
Keep all laundry aids (including detergents, bleach,  
fabric softener, etc.) out of the reach of children.  
Introduction to your new washer  
9
WARNING  
Web Site  
RISK OF FIRE, ELECTRIC SHOCK OR INJURY  
information and to view a selection of our products.  
To reduce the risk of fire, electric shock or injury to  
persons, read the IMPORTANT SAFETY  
INSTRUCTIONS of this manual before installing or  
operating this appliance.  
About this manual  
These operating and installation instructions may apply  
to more than one model of washer. Illustrations used  
may show details that differ from your particular model.  
Read your user manual. It contains valuable information  
about safety, installation and operation of your new  
appliance.  
This can save you time, make it easier to correctly install  
and use your washer, and improve your overall  
satisfaction with your new appliance.  
Standard features and helpful information  
Thank you for choosing Bosch for your laundry  
appliance needs.  
Please read and follow the use & care, important safety  
instructions and troubleshooting information contained in  
this manual. Please retain this manual for future  
reference.  
Special features  
Load adjust matches the water and power  
consumption to each cycle according to the amount of  
laundry sensed in the drum and the type of fabric.  
Standard features  
17.7 lb (8 kg) large drum capacity (for regular cotton  
The load adjust function runs automatically to keep  
energy and water consumption as low as possible.  
loads).  
The water level sensor ensures the water level is  
correct for the laundry and the cycle selected.  
Low washing and spinning noise levels.  
Large door opening featuring magnetic lock, 180º  
The automatic unbalanced load detection system  
spins the laundry several times to ensure even  
distribution.  
opening angle.  
Quality tested  
If the laundry is unevenly distributed, the spin speed is  
reduced, or the laundry may not be spun for reasons  
of safety.  
In the Wool cycle, the spin cycle is attempted only  
twice in order to prevent felting.  
Every Bosch washer is thoroughly tested before leaving  
the factory. As a result, a small amount of residual water  
may remain in the washer drum. We recommend running  
the Maintanance cycle to remove this water prior to  
washing your first load of laundry.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Save energy and detergent when washing lightly and  
Environmentally friendly use of your  
washer  
Your new Bosch washing machine is designed to use  
water, energy and detergent in a highly efficient way to  
help reduce operating costs, conserve resources and  
protect the environment.  
normally soiled laundry.  
Energy-saving mode: The display panel lighting goes  
out after a few minutes and Start/Pause flashes. To  
activate the display, press any button.  
Energy-saving mode is not activated if a program is  
running.  
Utilize the maximum amount of laundry for the  
If the laundry will be dried in a dryer afterwards, select  
spin speed according to the dryer manufacturer’s  
instruction.  
appropriate cycle.  
Avoid using too much detergent.  
Wash normally soiled laundry without a prewash.  
Dimensions and clearances required  
Appliance dimensions  
Length of power cord and water supply  
hoses  
D
E
To left of washer* To right of  
washer*  
U.S.  
Metric  
U.S.  
Metric  
Electric power 51 in.  
cord  
130 cm 47 in.  
135 cm 33 in.  
94 cm 55 in.  
119 cm  
Water supply 53 in.  
hoses  
84 cm  
Drain Hose  
37 in.  
140 cm  
F
* Facing the front of the washer  
Installation types  
Stacked washer and dryer  
A Bosch dryer of the same dimensions can be placed on  
top of the washer to save space.  
G
Use the special washer-dryer sets which can be obtained  
from customer service or your local dealer (see the dryer  
user manual).  
ꢂꢃꢁƒ  
ꢀꢁƒ  
H
%
Label  
Dimension  
U.S.  
Metric  
60 cm  
64 cm  
(
a
b
width  
23.6 in.  
25 in.  
depth  
(to front of door)  
height (minimum*)  
height (maximum*)  
side clearance  
(door open 180°)  
depth  
+
)
c
d
e
33.2 in.  
33.8 in.  
15.8 in.  
85 cm  
86 cm  
40 cm  
42.5 in.  
108 cm  
*
(door open 90°)  
Weight approximate  
169.8 lbs. 77.2 kg  
&
* height of appliance depends on the extension of the  
height adjustable appliance feet.  
$
'
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Under counter (Preferred)  
Clearance requirements (Minimum)  
A Both Sides  
0.6 in.  
6.3 in.  
3.2 in.  
3.4 in.  
1.5 cm  
16 cm  
8 cm  
B
C
D
Top  
Rear*  
Front  
8.5 cm  
* Rear clearance as close to wall as venting or water  
connection will allow. If the washer is installed with a  
dryer, the greater rear clearance for the dryer venting is  
required for the laundry pair.  
Ventilation area (Minimum)  
E
F
Top  
63 sq. in.  
63 sq. in.  
404 sq. cm  
404 sq. cm  
$
%
&
Bottom  
Vent spacing (actual not minimum dimensions)  
G
H
J
37 in.  
26 in.  
3 in.  
94 cm  
66 cm  
7.6 cm  
73 cm  
Front of the appliance fully open.  
No doors or coverings.  
K
29 in.  
Minimum opening dimensions  
Stand alone (shown) or Side-by-Side  
A
B
C
23.8 in.  
23.8 in.  
33.5 in.  
60.5 cm  
60.5 cm  
85 cm  
Under counter (Less Desirable)  
(
(
.
)
&
+
-
$
)
*
'
If front of the appliance is covered ventilation openings  
must be installed.  
E & F are minimum area sizes  
E
63 sq.in.  
63 sq.in.  
404 sq.cm  
404 sq.cm  
F
G & H  
actual spacing dimensions for min. open area sizes  
G
H
3 in.  
7.6 cm  
14 in.  
35.6 cm  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions  
Tools needed  
9
WARNING  
The following tools may be helpful during installation of  
your washer.  
RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY  
TO PERSONS  
To reduce the risk of fire, electric shock or injury to  
persons, read the Important Safety Instructions at  
the front of this manual before installing or operating  
this appliance.  
9
CAUTION  
WASHING MACHINE IS HEAVY  
Use additional help and care when lifting and  
positioning.  
13mm socket for removing the transport bolts.  
17mm wrench for adjusting the appliance feet.  
Bubble level for leveling the appliance.  
Introduction  
Waste disposal  
Disposal of Packaging Materials  
After unpacking your new appliance dispose of the  
protective packaging materials in an environmentally  
friendly way. Ask your dealer or inquire with your local  
authority regarding currently acceptable means of  
disposal.  
Read these installation instructions completely and  
carefully before starting to install your new washing  
machine. The information contained can save you time  
and effort and will help to ensure optimum performance  
of your new washer. Be sure to observe all warnings and  
cautions.  
NOTICES  
Frozen hoses can tear or burst. Do not install the  
washing machine outdoors or in an area exposed to  
freezing condtions.  
9
WARNING  
WARNINGS FOR CHILDREN  
Do not let children play with packaging and  
associated parts to avoid risk of choking or  
suffocation.  
If the washing machine is located in a room which will  
be exposed to temperatures below freezing, or if it is  
located in a cabin that is being shut down for the  
winter, any residual water in the pump or water inlet  
hose(s) must be drained.  
Disposal of Your Old Appliance  
Take care not to damage the washing machine. Do  
Your old appliance can be recycled if it is no longer to be  
used. Prior to disposing of your old appliance observe  
the following precautions to reduce safety risks.  
not hold on to protruding parts (e.g. door) when lifting.  
In addition to the safety information listed here, the  
local water and electricity supplier may have special  
requirements.  
9
WARNING  
If in doubt, have the appliance connected by an  
TO AVOID RISK OF INJURY OR DEATH, DO THE  
FOLLOWING  
authorized technican.  
- after unplugging the old appliance, remove the  
electric power cord and dispose of properly.  
- remove the door or permanently disable the door  
lock to prevent children from being locked inside.  
These installation instructions are intended for use by  
qualified installers. In addition to these instructions, the  
installation must comply with:  
- for the United States - National Electrical Code, ANSI/  
NFPA70 - and latest editions of the State and municipal  
and/or local regulations.  
- for Canada - Canadian Electrical Code C22.1 - and the  
latest editions of the Provincial, Municipal and/or local  
regulations.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Parts provided with your washer  
Back side of the washing mashine  
Hot water connection  
Cold water connection  
H
P
NOTICE: If any parts are missing please notify your  
dealer immediately.  
Set up on a pedestal with drawer  
Pedestal item number: WMZ 20490  
Mount washer on the pedestal according to the  
instructions in the installation kit.  
Installation checklist  
Review the following list and check off each step as it is  
completed during installation.  
Installation Step  
Page  
è
If installing to a pedestal (base), com- 12  
plete the base installation before  
removing the transportation bolts  
#
Completely remove all four shipping  
bolts keeping the bolt and bushing  
assemblies intact  
Connect the water supply hose and  
drain hose  
Connect the electrical power  
Slide the washing machine into its final  
location  
Power cord with plug  
Literature pack; contents:  
User manual  
(
0
Level the washing machine (as low as 14  
possible)  
Before washing laundry, run a mainte- 22  
nance cycle  
Warranty  
Covers with hose holders  
Drain hose  
8
@
Elbow to form the hose to fit the drain pipe  
Importance of installing on a solid, level  
floor  
Washer drum contents  
Your new Bosch washing machine utilizes high spin  
speeds to achieve superior water removal from your  
laundry resulting in reduced drying time. It is important to  
install your washing machine on a floor that will provide  
firm support. This prevents the washer from experiencing  
excess vibration during spinning that could cause the  
washer to move or be noisy.  
2 water supply hoses are shipped in the washer drum.  
Be sure to remove each of these items from the drum  
before using the washer.  
The installation surface must be solid and level in both  
directions. Avoid installing your washer on soft surfaces  
such as floors with carpet or foam backed covering  
material.  
If installing the washer on a wooden floor, observe the  
following:  
install the washer in a corner for better support if  
possible.  
if necessary, reinforce the floor by screwing a water  
resistant wooden board to the floor (minimum of  
1.18 in./30 mm thick).  
secure the front feet of the washing machine with  
holding brackets. A set of holding brackets can be  
obtained from a specialist store or from Customer  
Service (part number WMZ 2200).  
+
3
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Remove the transport bolts  
9
CAUTION  
DAMAGE TO THE APPLIANCE  
The machine is secured for transport with  
transport bolts.  
Transport bolts that are not removed can damage  
the drum during operation of the machine, the  
washer will vibrate, and it will be much noisier  
during spin cycles if the transport bolts are not  
removed before use.  
Be sure to remove all 4 transport bolts  
completely before first use. Keep the transport  
bolts.  
NOTICE: Keep the assemblies together and store them  
for later use such as when moving the washer.  
If a pedestal was purchased with the washer, it  
must be installed first, prior to removing the  
transport bolts. Please consult the pedestal  
installation instructions.  
In order to prevent transport damage during later  
transport, be sure to re-install the bolts before  
transport.  
1. Remove hoses from the brackets.  
Water connections  
Water supply hose connections  
NOTICES  
The washing machine must only be operated with cold  
and hot (max. 140 °F/60 °C) tap water. Do not  
connect the appliance to the mixer tap of a  
pressurized hot-water boiler.  
To prevent water damage, the hot and cold water  
valves should be accessible when the washing  
machine is in place and should always be turned off  
when the washing machine is not in use.  
2. Loosen and remove all 4 transport bolts.  
Remove the sleeves. Take the power cable out of the  
brackets.  
If installing the washing machine in a new building or a  
building in which the plumbing system was recently  
installed or upgraded, flush the lines before installing  
the washing machine to remove any sand, dirt or  
residue.  
To prevent leakage or water damage, follow the  
instruction in this chapter.  
If in doubt, have the appliance connected by a  
technican.  
Connect your washer to the wall faucets using the  
included AquaSecure water supply hose.  
Observe each of the following:  
3. Place covers over the transport bolt holes  
Four plastic covers are provided in the small parts bag  
included with your washer. Separate these covers and  
install one in each hole where the transport bolts were  
removed.  
Only use the new water supply hose shipped with your  
washer. Never connect old used hoses.  
The water supply hoses must not be kinked, bent or  
flattened in such a way as to potentially diminish water  
flow.  
Lock covers firmly by pressing on the snap hook.  
Insert hose holder. Secure hoses in the hose holders.  
The water supply pressure must be between 14,5 to  
145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons  
(8 liters) of flow per minute. A pressure regulator valve  
must be installed if the maximum water pressure is  
exceeded.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Make sure the water supply faucet is easily accessible  
when the washer is in use. The faucet should be  
turned off if the washer is going to be unused for  
extended periods of time.  
About the AquaSecure Hose  
Make sure rubber washers are in place at both ends of  
the water supply hose. Missing washers could cause  
leaks.  
The connection points are under full water pressure.  
Turn on the water tap and check for leaks.  
Periodically inspect the water supply hose and replace  
with a new hose if cuts, kinks or leaks are observed.  
The AquaSecure hose prevents potential flooding in the  
event the hose develops an internal leak. If the hose  
leaks, the indicator turns red and water flow is blocked.  
Water drain hose connection  
NOTICES  
Do not reuse an old drain hose. Only use the drain  
hose and parts included with your washer.  
Do not kink or modify the water drain hose.  
Height of drain point  
Height difference between the floor and drainage point:  
max. 39 in. (100 cm).  
Water connection hoses  
red - Hot water-hose  
blue - Cold water-hose  
Types of drainage hookups  
Standpipe  
GUDLQꢅ  
SLSH  
PD[ꢄꢅꢀꢁꢅƒꢅ  
PD[ꢄꢅꢀꢁꢅƒꢅ  
FDEOHꢅWLH  
Attach this end to water tap. Hand tighten only.  
Attach the drain hose using the elbow included with your  
washer.  
Fit the drain hose to the elbow provided leaving a  
maximum of 4 inches of drain hose projecting. Insert this  
section of the drain hose into the drain pipe. Secure the  
elbow and hose with a nylon tie strap or the equivalent to  
keep the hose from coming out of the drain pipe during  
use.  
Sink siphon  
Attach this end of the hose to the back of the washing  
machine. Hand tighten only.  
Secure the drain hose to the sink siphon using a Ø 0.9 -  
1.6 in. (20-44 mm) hose clip (available from a hardware  
store).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Basin  
WARNING  
4. Use a bubble level to check the top of the washer to  
make sure it is level side to side and front to rear.  
5. Press down on each corner of the washer top to make  
sure the washer doesn’t “wobble“. There should be no  
"give" or movement. All four washer feet should press  
equally against the floor. This is just as important as  
the washer being level to prevent vibration.  
9
SCALDING  
When washing at high temperatures, there is a risk  
of scalding if you touch hot suds, e.g. when  
pumping out hot suds into a wash basin.  
6. When the washer is level and does not wobble, lock  
the washer feet in place by tightening the locknuts  
against the washer bottom. Be sure to do this without  
changing the height of the foot (hold the foot while  
tightening the locknut).  
Do not reach into the hot suds.  
9
CAUTION  
Procedure for adjusting the washer feet:  
APPLIANCE DAMAGE/DAMAGE TO TEXTILES  
If the end of the drain hose is dipped into the  
pumped-out water, water can be sucked back into  
the appliance and can damage the appliance/  
textiles.  
Make sure that:  
The sealing plugs do not seal the drain of the wash  
basin.  
The end of the drain hose does not dip into the  
pumped-out water.  
The water flows out fast enough.  
1. After determining which washer feet need to be  
extended, have someone lift up on the washer slightly  
to take pressure off the foot to be adjusted.  
2. Turn the grey plastic foot to extend it downward as far  
as necessary to raise the corner of the washer the  
correct amount to level the washer.  
3. When the height of the foot is correct, use a 17 mm  
open end wrench to tighten the locknut against the  
washer bottom. The locknut should be tight against the  
bottom of the washer to lock the foot in place.  
Electrical connection  
9
WARNING  
ELECTRICAL SHOCK  
Attach the drain hose securely to the wash basin.  
Improper connection of the ground may result in  
electric shock. Have the appliance checked by a  
qualified technician or licensed electrician if you are  
in doubt as to whether the washer has been  
properly grounded.  
NOTICE: In any multi-story installation, the washer  
should be installed on a drained floor to prevent water  
damage to rooms below in the event of a leak.  
Leveling the washer  
Importance of leveling the washer  
Your new washer uses high spins speeds to remove  
water at the end of the wash cycle. It is important that  
your washer is level and that all four washer feet press  
with equal pressure against the floor. This will help  
assure the quietest, most vibration-free use of your  
washer.  
9
WARNING  
ELECTRICAL SHOCK  
To reduce the risk of fire or electrical shock, DO  
NOT use an extension cord or an adapter to  
connect the washing machine to the power supply.  
Follow these steps:  
1. Install the washer on a level and solid surface,  
preferably in a corner of a room.  
9
WARNING  
2. If the floor is uneven (or unlevel) adjust the washer feet  
as required to level the washer. Do not place anything  
under the washer feet to help level the washer.  
ELECTRICAL SHOCK  
To reduce the risk of electrical shock:  
Only pull out the main cable by the plug and  
never by the cable, as this could damage it.  
Never touch or hold the main plug with wet  
3. Extend the washer feet no more than is necessary. The  
more the feet are extended, the more vibration the  
washer will experience. Start with the washer feet  
turned all the way in and adjust each foot as  
necessary.  
hands.  
Never unplug the main plug during operation.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Grounding Instructions  
z. Only this symbol can guarantee compliance with  
all current regulations.  
This appliance must be grounded. In the event of  
malfunction or breakdown, grounding will reduce the risk  
of electric shock by providing a path of least resistance  
for the electric current. This appliance is equipped with a  
cord that has an equipment grounding conductor and a  
grounding plug. The plug must be plugged into an  
appropriate outlet that is properly installed and grounded  
in accordance with all local codes and ordinances.  
Transporting the washer  
Before transporting the washer  
1. Disconnect the washer power cord from the wall  
outlet.  
2. Turn off the water supply to the washer.  
3. Disconnect water supply lines from the tap.  
4. Disconnect the drain hose from the drain location.  
5. Install the transport bolt assemblies as shown below.  
Important Points  
Do not modify the plug provided with the appliance. If  
the plug will not fit into the outlet have a properly  
grounded outlet installed by a qualified electrician. Do  
not cut, remove or bypass the grounding prong on the  
washer power cord plug.  
Remove the transport bolt hole covers  
The washer power cord plug must be easily  
accessible when the washer is operating.  
When unplugging or plugging in the washer power  
cord, grasp the plug. Do not pull on the power cord to  
unplug the washer.  
The household electrical supply must be suitable for  
the voltage specification shown on the washer rating  
plate (located inside the washer door, immediately  
below the drum opening).  
See the table below for connection specfications and  
fuse/breaker requirements.  
1. Remove all four transport bolt hole covers.  
2. Pull the tip of the arrow on the cover out slightly to  
disengage the locking tab.  
Volts  
Hertz  
Ampers  
Watts  
3. Rotate the cover counterclockwise to remove. Repeat  
for all 4 transport bolt hole covers.  
208 - 240  
60  
12  
2.880 max.  
Insert the transport bolt assemblies  
The wiring for the electrical outlet circuit must be  
sufficient to meet the appliance requirements. Use of a  
Ground Fault Circuit Interrupter (GFCI) is  
recommended.  
Protect the power cord from physical damage, such as  
being twisted, kinked, pinched, caught in a door, or  
walked upon.  
If the power cord is damaged, it must be replaced by a  
qualified person to avoid a fire/shock hazard.  
Replacement power cords are available through  
Customer Service.  
1. Each assembly consists of a plastic bushing and a  
bolt that extends through the bushings. Unscrew the  
bolt until the threaded end is flush with the end of the  
plastic bushing.  
The washing machine must only be connected to an  
individual branch circuit via a socket which has been  
properly installed and grounded.  
2. Insert the transportation bolt and bushing assembly as  
shown. The metal housing slides around the bolt  
through the slot in the plastic bushing as the bushing  
is slid into place. The open part of the bushing slot  
should be facing the direction shown to allow the  
assembly to slide fully into place.  
Make sure that:  
- the power plug fits into the socket  
- the wire size is sufficient  
- the grounding system is properly installed:  
The power cord may be replaced by an electrican  
only. Replacement power cords are available from  
Customer Service. To reduce the risk of fire or  
3. When the bolt is in place screw it in until the bolt  
threads engage the drum. Double check and ensure  
bolts are screwed into threaded holes and not into  
adjecent cracks or crevices. Repeat the process for all  
4 transportation bolt assemblies before tightening any  
all the way. Complete tightening all 4 bolt assemblies  
until they are each snug in place.  
electrical shock, DO NOT use an extension cord or an  
adapter to connect the washing machine to the power  
supply. If a ground fault circuit breaker is to be used,  
only use the types marked with the following symbol:  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting to know your appliance  
Control panel  
+
#
Display field  
Temp. selection, Spin Speed, Delay-Start  
(
0
8
To change the default cycle settings.  
ꢀ ꢁ ꢂ  
#
3
+
Indicator lamp lights up if the setting is active.  
Easy Iron, Extra Rinse, Prewash/Pre Treat  
Additional option settings.  
Indicator on = setting is active.  
Start/Pause  
starts or pauses the selected cycle  
lit steady - cycle running, can be paused  
blinking - settings can be changed; cycle can  
be started; door is locked (water may be hot);  
cycle is in Pause mode  
Selectable temperature ranges  
Extra hot, Hot, Warm, Cold  
(
0
8
Cycle Selector for selecting a cycle and on/off  
switch;  
@
H
Selectable spin speed ranges  
High, Medium, Low, No spin  
turns in both directions.  
Display field for settings and information.  
4 Digit Display:  
delay start-time  
adjustable in 1h (hours) steps to 24 hours  
cycle duration  
for example 2:40 (hours:minutes)  
Cycle status sequence  
@
H
P
Child lock  
Indicator lamps for additional option settings  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Laundry  
Preparing the laundry  
Determining degree of soiling  
Light soiling  
NOTICE: Damage to the appliance/fabrics  
No visible soiling or stains, but may have absorbed  
some body odor. This could include light weight  
summer clothing such as T-shirts, shirts, or blouses  
worn for only one day. Also to freshen bed linen or  
guest towels.  
Foreign objects (e.g. coins, paper-clips, needles, nails)  
may damage the laundry or components in the washing  
machine.  
Therefore, note the following tips when preparing your  
laundry:  
Normal soiling  
Visible soiling and/or a few light stains. This could  
include clothing such as T-shirts, shirts, or blouses that  
have been sweated in or worn several times. Also tea  
towels, hand towels or bed linen used for up to one  
week. Net curtains (without nicotine stains) that have  
not been washed for up to a half year.  
Heavy soiling  
Visible soiling and stains. This could include kitchen  
towels, fabric napkins, baby bibs, children’s outer  
clothing or football jerseys and shorts stained with  
grass and/or earth. Also could include working clothes  
such as overalls and jeans and other clothing worn for  
outside work and activities such as gardening, home  
and yard maintenance or worn during sports activities.  
Empty all pockets to ensure no loose debris (coins,  
keys, other hard objects) are placed in the washer  
drum.  
Close any fasteners (such as zippers and hooks) that  
could cause laundry to catch or become entangled.  
Remove any foreign objects or non-washable parts.  
Identifying and treating stains  
Turn trousers and knitted wear inside out prior to  
Oils and grease: normal body skin oil,  
cooking oils/fats, sauces, mineral oil, or  
wax (containing fat/oil). Treatment: scrape  
residue from fabric. Pretreat. Wash using  
hottest water safe for the fabric. For heavy  
stains, apply non-flammable dry cleaning  
fluid to back of stain, replacing towels  
under stain frequently. Rinse thoroughly  
and wash using hottest water safe for the  
fabric.  
washing.  
Place small items (such as socks and handkerchiefs)  
and underwired bras into a mesh bag prior to washing.  
Sorting the Laundry  
Sort laundry items according to color, degree of soiling  
and recommended wash temperature range.  
Beverages and juices: tea, coffee, red  
wine, fruit, vegetables. Treatment: Pretreat  
stain. Wash using cold water.  
Proteins and carbohydrates: blood, egg,  
milk, starch. Treatment: Rinse immediately  
in cold water. If stain remains, soak in cold  
water with an enzyme prewash.  
Wash white items separately from colored items.  
Otherwise, white items may tend to become grey.  
Soot, earth, sand (pigments), red clay  
(such as soiling of tennis clothing). Brush  
off residue if present. Pretreat or soak with  
a laundry product containing enzymes.  
Observe laundry care labels  
H[WUDꢂKRW KRW  
ZDUP  
FROG  
Removing stains  
Remove/pretreat stains as soon as possible after they  
have occurred.  
Dab with a soapy solution. Do not rub.  
Select an appropriate wash cycle and wash the item.  
Several washing cycles may be required in order to  
remove stubborn or dried-in stains.  
Check the care labels on each laundry item prior to  
washing. Choose an appropriate wash cycle that does  
not exceed the temperature recommended.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Laundry detergents and additives  
Detergent for woollens  
Adding the correct amount of HE detergent  
Suitable for wool  
Wool program: Cold - Warm  
9
WARNING  
WARNING  
Saving energy and detergent  
For light and normal soiling, you can save energy (lower  
washing temperature) and detergent.  
To avoid risk of poisoning, keep detergents and  
cleaning products out of the reach of children.  
Saving  
Soiling/note  
Avoid overuse of detergent.  
Measure out the detergent according to:  
Reduced tem-  
perature and  
detergent  
quantity as  
per the rec-  
ommended  
dosage  
Light e.g.:  
Light summer/sports clothing  
The amount of laundry.  
(worn for a few hours)  
The degree of soiling.  
T-shirts, shirts, blouses (worn  
for up to one day)  
Guest bed linen and hand  
The water hardness. This information can be obtained  
from your local water authority. Soft water requires less  
detergent.  
towels (used for one day)  
No visible dirt or stains. Clothing  
has taken on some body odour.  
Normal e.g.:  
Too much detergent  
T-shirts, shirts, blouses (sweat  
Excessive foam will reduce washing agitation and  
soaked, worn a few times)  
cause poor washing and rinsing results.  
Temperature  
as per the  
care label and  
detergent  
quantity as  
per the rec-  
ommended  
dosage for  
heavy soiling  
Towels, bedding (used for up  
to one week)  
Visible dirt or a few light stains.  
Not environmentally compatible (wastes detergent and  
is not good for the environment).  
Too little detergent  
Heavy  
Dirt and/or stains clearly visible,  
e.g. tea towels, baby items, work  
clothing  
Laundry will not be washed clean.  
Eventually the laundry will take on a grey and hard  
appearance. Greyish-brown grease spots may stain  
the laundry, heating elements may begin to calcify.  
NOTICE: When measuring the amount of all detergents/  
additives/care products and cleaning agents, please  
always check the manufacturer's instructions and  
information.  
The fabric care label is important for selecting the correct  
detergent, temperature and treatment of the laundry.  
If desired you can visit the following sites for additional  
information on detergents and fabric care.  
Standard detergent with optical brighteners  
Suitable for boil-washable white laundry made from  
linen or cotton  
Program: Cottons / Cold - Extra hot  
Detergent for colours without bleach or optical  
brighteners  
Suitable for coloured laundry made from linen or  
cotton  
Program: Cottons / Cold - Hot  
Detergent for colours/delicates without optical  
brighteners  
Suitable for coloured laundry made from easy-care  
fibres, synthetic fibres  
Program: Easy-Care / Cold - Hot  
Detergent for delicates  
Suitable for delicate, fine fabrics, silk or viscose  
Program: Delicate/Silk / Cold - Hot  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Cycle selection table  
Cycles  
max.  
Load  
up to:  
selectable cycle settings, Type of laundry  
default settings (bold)  
additional cycle settings ;  
Information  
Temperature Spin speed  
Cotton Normal full load Extra hot  
High  
Medium  
Low  
Sturdy fabric, cotton or linen  
fabric that withstands very hot wash/Pre Treat  
water  
Easy Iron, Extra Rinse, Pre-  
Hot  
Warm  
Cold  
No spin  
High  
Medium  
Low  
Sanitary  
full load Extra hot  
Sturdy fabric, cotton or linen  
fabric that withstands very hot wash/Pre Treat ;  
water  
Easy Iron, Extra Rinse, Pre-  
Hot  
longer wash and rinse with  
more water for especially sen-  
sitive skin  
Warm  
Cold  
No spin  
Quick Wash 30 1/2  
Hot  
High  
Easy-care fabrics made of cot-  
ton, linen, synthetic fibres or  
blended fabrics ;  
min  
load  
Warm  
Cold  
Medium  
Low  
suitable for slightly-soiled laun-  
dry  
No spin  
Delicates  
1/3  
Hot  
Medium  
Low  
No spin  
for delicate, washable fabrics, Easy Iron, Extra Rinse, Pre-  
e.g. made of cotton, satin, syn- wash/Pre Treat ;  
load  
Warm  
Cold  
thetic fibres or blended fabrics  
spinning only between rinse  
(e.g. curtains) ;  
cycle  
bulky items (e.g. comforters)  
Jeans  
1/2  
Hot  
High  
dark cotton textiles and dark Easy Iron, Extra Rinse, Pre-  
easy-care textiles;  
wash/Pre Treat  
load  
Warm  
Cold  
Medium  
Low  
Wash textiles inside-out.  
No spin  
Medium  
Low  
Active Wear  
1/3  
Hot  
Fabric for outdoor wear  
Extra rinse with spin  
Easy Iron, Extra Rinse, Pre-  
wash/Pre Treat  
load  
Warm  
Cold  
No spin  
High  
Medium  
Low  
Rinse  
full load  
full load  
Easy Iron, Extra Rinse  
Easy Iron  
Spin/Drain  
Extra spin with selectable  
speed  
No spin  
If this cycle should only drain,  
set the spin speed to No spin.  
Maintenance  
empty  
Medium  
special cycle for cleaning the default temperature: Extra  
drum  
hot ; not visible in the display  
field and not possible to  
change the temperature.  
Low  
Woolens/Hand- 1/3  
Warm  
Cold  
Medium  
Low  
Hand and machine washable Especially gentle washing  
wash  
wool/wool blend fabrics  
cycle to avoid shrinkage, long  
cycle pauses (clothing rests in  
sudsy water)  
load  
No spin  
Anti shrink  
Towels  
1/3  
Hot  
Medium  
Low  
non-iron shirts/blouses of cot- Easy Iron, Extra Rinse, Pre-  
ton, linen; synthetic or mixed wash/Pre Treat  
materials  
load  
Warm  
Cold  
No spin  
High  
Medium  
Low  
1/2  
Extra hot  
Hot  
durable, boil-proof cotton tow- Extra Rinse, Prewash/Pre  
els ;  
Treat  
load  
especially soft towels  
Warm  
Cold  
No spin  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cycles  
max.  
Load  
up to:  
selectable cycle settings, Type of laundry  
default settings (bold)  
additional cycle settings ;  
Information  
Temperature Spin speed  
Whitest/Whites full load Extra hot  
High  
Medium  
Low  
White sturdy fabric, cotton or Easy Iron, Prewash/Pre Treat  
linen fabric that withstands  
very hot water  
Hot  
Warm  
Cold  
No spin  
High  
Medium  
Low  
Heavy Duty  
Perm Press  
Tips  
full load Extra hot  
For heavily to lightly soiled  
(white) cottons, household lin-  
ens, work and play clothes.  
Easy Iron, Prewash/Pre Treat  
Hot  
Warm  
Cold  
No spin  
High  
Medium  
Low  
1/2  
Hot  
Cotton, linen synthetic or  
blended fabrics  
Easy Iron, Extra Rinse, Pre-  
wash/Pre Treat ;  
load  
Warm  
Cold  
reduce rinse and final spin  
cycle  
No spin  
Do not wash new multicolored laundry together with other laundry.  
The cycles are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load or select, e.g. Pre-  
wash/Pre Treat.  
Rinse cycles use cold water only.  
For cycles with pre-wash, divide detergent into chamber I and II.  
Starching  
NOTICE: Laundry must not be treated with fabric  
softener.  
Starching is possible in all wash programs if liquid starch  
is used. Measure starch into compartment M in  
accordance with the manufacturer's instructions (clean  
first if necessary).  
Dyeing/bleaching  
Dye should only be used in normal household quantities.  
Salt may damage stainless steel. Always follow the dye  
manufacturer's instructions.  
Do not use the washing machine to bleach clothes.  
Soaking  
1. Pour soaking agent/detergent into compartment II in  
accordance with the manufacturer's instructions.  
2. Turn the program selector to Cotton Normal Cold  
program.  
3. Press Start/Pause.  
4. After approx. ten minutes, press Start/Pause.  
5. After the required soaking time, press Start/Pause  
again to continue or change the program.  
NOTICES  
Load laundry of the same color.  
No additional detergent is required; the soaking  
solution is used for washing.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Default cycle settings  
At the factory, a temperature range, spin speed range,  
and cycle duration ("Finish at" time) are pre-set for all  
cycles.  
After selection of the cycle, these values are displayed in  
the display field.  
Delay Start  
When you select a cycle, the duration of the cycle in  
question is displayed.  
Before the cycle start, the cycle end ("Finish at" time) can  
be pre-selected in one-hour steps (h=hour) up to a  
maximum of 24h.  
You can change the default settings as follows.  
Press the Delay Start button until the desired setting is  
displayed.  
Changing the temperature range  
Before and during the cycle, you can change the default  
temperature range depending on the cycle progress.  
NOTICE: The cycle duration is included in the set "Finish  
at" time.  
Press the appropriate button until the desired setting is  
displayed.  
The maximum temperature range that can be set  
depends on the cycle selected.  
After the start, the pre-selected time, e.g. 8h is displayed  
and counted down until the wash cycle begins. Then the  
cycle duration, e.g. 2:40 (hours:minutes) is displayed.  
Changing the pre-selected time:  
If the “Delay Start” function has been activated and  
before the wash cycle has started, you can change the  
delay time as follows:  
Changing the spin speed range  
Before and during the cycle, you can change the spin  
speed range depending on the cycle progress.  
1. Press Start/Pause.  
Press the appropriate button until the desired setting is  
displayed.  
No spin setting: Rinse stop = without final spin, the  
laundry remains in the last rinse water.  
2. Press the Delay Start button until the desired number  
of hours is displayed.  
3. Press the Start/Pause button  
NOTICE: The cycle duration is adjusted automatically  
when the cycle is running. Changes to the default cycle  
settings or cycle settings also cause changes in the  
cycle duration.  
The maximum speed range that can be set depends on  
the cycle selected.  
Additional program settings  
Extra Rinse  
Auxillary rinse cycle. Longer cycle duration. For areas  
with very soft water or for further improvement of rinse  
results.  
Easy Iron  
Special spin cycle with final loosening up of laundry.  
Delicate final spin - moisture remaining in the laundry is  
slightly increased.  
Prewash/Pre Treat  
For heavily soiled washing. Pour detergent into  
dispensers I and II.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Operating Instructions  
Using the cycle selector to choose a wash  
cycle  
NOTICE: If you have activated the child lock, you must  
deactivate it before you can set a cycle.  
Use the cycle selector to select the desired cycle. Turns  
in both directions.  
9
WARNING  
WARNING  
To reduce the risk of fire, electric shock, or injury to  
persons, read the Important Safety Instructions and  
Operating Instructions before operating this  
appliance.  
The machine is switched on.  
In the display field, the cycle duration for the selected  
cycle appears and the indicator lamps for the pre-set  
temperature and spin speed range light up.  
Before doing any laundry with your washing  
machine  
Check to make sure your washer has been installed  
properly by following the installation instructions in this  
manual.  
Changing default cycle settings  
You can use the default settings or change the default  
settings.  
Press the appropriate button until the desired setting is  
displayed.  
9
WARNING  
The settings are active without confirmation.  
They are not retained after the appliance is switched off.  
WARNING  
Before installing or using your washing machine  
read and follow all installation and operating  
instructions.  
Selecting additional cycle settings  
By selecting additional settings, you can adjust the  
washing process still better to suit the items you are  
washing.  
The settings can be selected and deselected depending  
on the cycle progress.  
The indicator lamps of the buttons light up if the setting is  
active.  
Check the machine. Never start a damaged machine!  
Contact your customer service!  
Check to be sure your household electrical system  
voltage and the voltage specifications on the washing  
machine rating plate correspond.  
Check to be sure the washer hot and cold water supply  
taps are turned on.  
The settings are not retained after the appliance is  
switched off.  
Turning the washing machine on and off  
The rotating Cycle Selector turns the washer on as wash  
cycles are selected and off when the selector is later  
turned to the vertical Off position.  
Loading the laundry  
Before loading your first load of laundry  
Your new washing machine was tested before leaving  
the factory. This process involves running various wash  
cycles. As a result, a small amount of water may remain  
in the tub and drainage system. Run a Maintenance cycle  
with no laundry to clean the system before your first load  
of laundry.  
First add 1 to 2 tablespoons of detergent to the leftmost  
compartment of the detergent dispenser. Then run the  
Maintanance cycle.  
9
WARNING  
WARNING  
To avoid risk of explosion! Laundry items that have  
been pretreated with any material containing  
solvents (e.g. stain remover, cleaner’s solvent) must  
be rinsed out thoroughly by hand before they are  
placed in the washing machine.  
Wait for the cycle to finish.  
Loosen the laundry being loaded and mix small and  
large items  
Unfold the sorted items and place them loosely in the  
drum. Mix small and large items to help them better  
distribute in the drum during the spin cycle.  
Tip: Do not exceed the maximum load recommended for  
the type of wash. Overloading will cause poor wash  
results and will cause creasing.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Recommended Load Size  
Recommended maximum load size can be found:  
Filling  
WARNING  
9
IRRITATION OF EYES/SKIN!  
When opening the detergent drawer during  
operation, detergent or laundry care products may  
spray out.  
Open the drawer carefully.  
In case of contact with detergent or laundry care  
products, rinse the eyes or skin thoroughly.  
D
C
B
In case of accidental ingestion, consult a doctor.  
NOTICE: Thin thick fabric softener and laundry care  
a
b
c
1/3 Load - woollens, delicates, silk  
products with water; this prevents clogging.  
1/2 Load - cotton, synthetic fabrics, or knitted textiles  
Full Load - cotton and linen  
Pour the detergent and laundry care product into the  
appropriate chambers:  
Tips  
Detergent  
for liquid detergent  
dispenser A  
After loading, close the door carefully so as not to trap  
any items between the door and the rubber seal. The  
door should close easily and should not be forced to  
close.  
Dispenser I  
Detergent for pre-wash  
Fabric softener, starch  
Do not exceed max  
Dispenser i  
Foreign objects left in the drum may damage laundry.  
Before inserting any laundry, check to make sure no  
foreign objects are in the drum.  
Tips  
Do not pour fabric softener directly into  
the wash load.  
Filling the detergent and additives  
compartments  
Fabric softener is automatically dis-  
pensed during the last rinse cycle.  
NOTICE: Damage to the appliance  
Dilute concentrated or thick fabric soft-  
ener or fabric conditioner with water (2/  
3’s water) before pouring it into the dis-  
penser (prevents blockage of overflow).  
Detergent and laundry pre-treatment aids (e.g. spot  
remover, pre-wash sprays, etc.) can cause damage if  
they come into contact with the surfaces of the washer.  
Do not let these substances touch the surfaces of the  
washer. If necessary, wipe off spray traces and other  
traces/drops immediately with a soft cloth.  
Dispenser II Detergent for main wash, water softener,  
spot remover,  
NOTICE: Do not use bleach and liquid  
chlorine bleach or color safe bleach.  
Measuring  
Measure out the detergent and laundry care products  
according to:  
1. Open the detergent dispenser drawer.  
2. Add detergent or additive.  
the water hardness; consult your water utility company  
for details  
3. Avoid overfilling the compartment to prevent early  
the manufacturer's instructions on the packaging  
Quantity of laundry  
dispensing.  
4. Close the detergent dispenser drawer completely  
Soiling  
before starting the wash cycle.  
Tip: DO NOT operate the washer without the detergent  
compartment in place and fully closed.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Liquid detergent dispenser  
To measure liquid detergent:  
Pausing/Continuing the cycle  
e.g. for soaking ~ Soaking; Page 20  
Press Start/Pause. - ¿ - appears on the display panel;  
washing machine door cannot be opened. To continue  
the cycle, press Start/Pause.  
1. Pull out the detergent drawer. Press down on the insert  
and remove the drawer completely.  
2. Push the liquid detergent dispenser forward.  
3. Insert the drawer again.  
Cancel cycle  
For cycles with a high temperature:  
1. Press Start/Pause.  
2. Cool the laundry off: Select Rinse.  
3. Press Start/Pause.  
For cycles with a low temperature:  
1. Press Start/Pause.  
2. Select Spin/Drain.  
3. Press Start/Pause.  
NOTICE: Do not use the liquid detergent dispenser with  
gel-type detergents and powdered detergents or for  
cycles with pre-wash and selected "Finish at" time.  
Cycle end with rinse stop  
Appears in the display field – – – and the indicator lamp  
on the Start/Pause button blinks.  
Starting the cycle  
Press the Start/Pause button Indicator lamp lights up  
and the cycle starts.  
In order to exit the cycle, set the cycle selector to Spin/  
Drain or select a spin speed range, then press the Start/  
Pause button.  
NOTICE: If you want to protect the cycle against  
inadvertent adjustment, select the child lock.  
Cycle end  
End appears in the display field and the Start/Pause  
button indicator lamp is off.  
During the cycle, the display field indicates the "Finish at"  
time and, after starting the washing cycle, the cycle  
duration and the symbols for the cycle progress.  
If the cycle status sequence Wash is also flashing in the  
display field, the washer has detected too much foam  
during the washing cycle and it has then automatically  
switched on a rinse to remove the foam.  
NOTICE: Use less detergent the next time you run the  
Child lock  
washer with the same load.  
You can secure the washer against inadvertent changing  
of the set functions. To do this, activate the child lock  
after cycle start.  
To Activate/Deactivate, press Start/Pause for approx. 5  
seconds. In the display field, you will see the D symbol.  
Removing laundry/switching the  
appliance off  
1. Open the front door of the washer and remove the  
laundry.  
D lit steady: The child lock is active.  
2. Turn the cycle selector to the Off position. Appliance is  
D blinking: The child lock is active and the cycle  
selector has been adjusted. To prevent a cycle  
interruption, set the cycle selector back to the initial  
cycle. The symbol lights up again.  
switched off.  
3. Turn off the water tap.  
NOTICES  
NOTICE: The child lock can remain activated until the  
next cycle start even after switching the machine off.  
Then you must deactivate the child lock before cycle  
start and if necessary activate it again after cycle start.  
Do not leave any laundry in the drum. It can shrink or  
be discolored by the next laundry.  
Selecting a different cycle  
If you have inadvertently started the wrong cycle, you can  
change this as follows:  
1. Press Start/Pause.  
2. Select another cycle.  
3. Press Start/Pause. The new cycle starts from the  
beginning.  
Remove any remaining items from the drum and  
rubber gasket.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Leave the front door and detergent drawer open so  
If at the end of the cycle the display is not lit up, the  
energy saving mode is active. To see display, press  
any button.  
that any remaining water can dry up.  
Always wait for the end of the cycle; otherwise the  
appliance may still be locked. If locked, switch the  
appliance on and wait until it unlocks.  
Signal  
1. Activate adjustment mode for the signal volume  
Hold Spin speed button down + turn one posi- Hold down for an additional 5 s until the  
Place on Ú.  
tion to the right.  
display elements light up. Adjustment  
mode is activated.  
2. Setting volume for button signals (depending on the model)  
Press until the desired volume has been reached.  
to 3. or  
Ú in order to exit the adjustment mode for the sig-  
nal volume.  
3. Setting volume for indicator signals  
Turn one position to the  
right.  
Press until the desired volume  
has been reached.  
Ú in order to exit the adjustment mode for the signal  
volumen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning and maintenance  
Your washer is designed to give you many years of  
service. Observe the following instructions to maintain  
and protect your washer and keep it in top operating  
condition.  
Cleaning the detergent dispenser  
If there is a buildup of residual detergent or additives, or  
if the softener compartment is not rinsed out well  
enough, it may be helpful to clean the dispenser.  
9
WARNING  
RISK OF ELECTRIC SHOCK!  
To avoid risk of electric shock always disconnect  
the washer from the power outlet prior to cleaning.  
Never clean the washer with a pressure washer.  
Cleaning the housing and control panel  
9
WARNING  
1. Open the dispenser drawer fully. Press down on the  
drawer catch (1) and pull the drawer (2) from the  
washer housing.  
RISK OF EXPLOSION!  
To avoid risk of explosion never clean the washer  
with flammable solvents.  
2. Remove the liquid detergent insert (3) by grasping it  
and pulling it upwards from the detergent dispenser  
drawer.  
As required, you may clean the washer housing and  
control panel.  
- use hot soapy water or a mild (non-abrasive) cleansing  
agent.  
3. Clean the insert by holding it under warm running  
water. Lightly wipe away any remaining detergent  
residue.  
4. Reinsert the liquid detergent insert and slide the  
detergent dispenser drawer back into place and close  
the drawer securely.  
- Dry with a soft towel.  
- Remove residue immediately.  
- Do not use high pressure spray.  
Tip: Do not operate the washer without the detergent  
drawer in place and completely closed.  
Cleaning the drum  
Metallic debris left in the drum can produce rust spots on  
the drum. Never use steel wool to try to remove these.  
Cleaning the water inlet strainers  
If the washer water supply slows or stops completely, the  
water inlet strainer may be blocked. Cleaning is  
recommended every 6 months in any event to reduce  
chances of valve blockage in areas using hard water.  
Use a chlorine-free cleansing agent and follow the  
manufacturer’s instructions.  
Descaling the washer  
Provided that you use correct amounts of detergent with  
your wash loads, descaling is not necessary. If descaling  
the washer drum does become necessary, please follow  
the descaling product manufacturer’s instructions.  
Small amounts of descaling agent can be used to  
remove white spots on the washer drum caused by lime  
or mineral deposits or small amounts of rust caused by  
metal objects left in the drum.  
Release the water under pressure in the supply hoses  
Normal water pressure in your home will cause some  
water to leak when you remove the water supply hose  
from the back of the washer. You can minimize this by  
first de-pressurizing the hoses.  
1. Turn off the water tap.  
2. Turn the cycle selector to any wash cycle (not to Drain  
NOTICE: Descaling agents contain acids which may  
attack parts of the washing machine and may discolor  
the laundry.  
or Spin).  
3. Press Start/Pause and allow 30 seconds to pass.  
4. Turn the cycle selector to the Off position.  
This should reduce the water pressure on the water  
supply hose.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Clean the strainers at the water tap end of the hose  
It may be necessary to clean the washer drain pump if  
the washer fails to drain (sound of water being pumped  
from the washer cannot be heard when the washer  
should be draining and other nearby drains, such as a  
sink, are draining properly).  
The washer pump can become blocked by loose debris  
(a good reason to check the drum and remove any  
visible debris after each load.) Fabrics that give off large  
amounts of fluff may also cause blockage.  
To access the washer drain pump, the service cover  
must first be removed (see steps below). With the service  
cover removed, proceed as follows:  
1. If the washer has not been drained, try to drain it now.  
Turn the cycle selector to the Spin/Drain cycle, select  
No spin and press the Start/Pause button. Wait a few  
moments to let the cycle drain the water from the  
drum. If the pump is totally blocked, the water will be  
unable to drain and the cycle will end.  
1. Remove the hose from the tap.  
2. Rinse the strainer under running water. Look at the  
strainer to see if any visible debris is still present.  
Rinse again if necessary to remove the debris.  
3. Reconnect the hose to the tap.  
2. Shut off the tap so that no more water flows in and has  
to be drained.  
Clean the strainers at the washer end of the hose  
Switch the appliance off. Unplug the power plug.  
1. Remove the hose from the inlet on the back of the  
washer.  
3. Open and remove the service cover.  
2. Using narrow pliers, grasp and pull the strainer from  
the inlet port.  
3. Rinse the strainer under running water.  
4. Reconnect the hose to the back of the washer and  
turn on the water tap. Check to see if water flows by  
starting a warm water wash cycle.  
NOTICE: Check for leaks to be sure the rubber washers  
are seated at both ends of the water supply hose and the  
connections are properly tightened.  
4. Loosen the screws and remove the protective film.  
Cleaning the drain pump  
9
WARNING  
ꢂꢉꢃƒ)  
RISK OF SCALDING  
Risk of hot water injury to skin!  
Allow the water to cool down prior to actuating the  
emergency door lock release.  
Caution, you are responsible for ensuring the safety  
of doing so. The water in the drum may be very hot  
and may pose a scald risk. Also, the drum may be  
full of water.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Use the pull-out drain hose located in the pump  
access opening to drain the remaining water into a  
suitable container (up to 5.3 U.S. gallons/20 liters of  
water may be drained). Pull the sealing cap from the  
hose and lay the hose over the side of the container  
and allow the water to finish draining from the drum.  
When finished, replace the sealing cap into the end of  
the hose and restore the hose to its storage location.  
6. Turn the pump cover counterclockwise to remove it. A  
small amount of residual water may flow out when the  
cover is removed.  
Clean the interior of the pump housing, removing any  
debris or foreign objects. Check to be sure the  
impeller wheel at the back of the pump housing can  
now turn freely.  
Remove any lint, debris or detergent residue from the  
threads of the pump cover and the pump cover  
housing.  
Replace the pump cover and tighten the screws.  
Handle must be vertical.  
7. Screw the protective film on the pump on again.  
8. Insert the service cover snap it in, and close it.  
NOTICE: In order to prevent detergent from flowing  
unused into the drain during the next wash cycles: pour  
0.26 U.S. gallons/1 liter water into the chamber II.  
Turn the cycle selector to the Spin/Drain cycle, select No  
spin and press the Start/Pause button.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Emergency door lock release  
In the event of a power interruption the program will  
continue running when the power supply has been  
restored.  
If the washer door must be opened and the normal door  
unlock procedures do not work, the emergency door  
lock release rod can be actuated to open the door.  
9
WARNING  
7. The door can then be opened.  
RISK OF SCALDING  
To avoid risk of scalding, allow water to cool down  
prior to activating the emergency door lock release.  
The drum may be full of hot water which could  
cause burn injury,  
Troubleshooting  
If you encounter a problem, consider the suggestions  
and instructions below before you call customer service.  
9
WARNING  
9
WARNING  
ELECTRIC SHOCK  
To avoid risk of electric shock, repairs should be  
carried out by an authorized technician.  
RISK OF INJURY  
You may injure your hands if you reach into the  
drum while it is turning.  
Do not reach into the drum when it is turning. Wait  
until the drum has stopped turning.  
If repairs are necessary and you cannot eliminate the  
fault with the aid of the table below, follow these steps:  
1. Turn the cycle selector to Off.  
2. Disconnect the washer from the power outlet.  
3. Turn off the water faucet.  
9
CAUTION  
4. Call Customer Service.  
WATER DAMAGE  
Any escaping water may cause water damage.  
Do not open the washing machine door if water can  
be seen through the glass.  
NOTICE: The troubleshooting items listed below can  
help you resolve minor issues with your washer quickly  
and without the necessity of waiting for a service call.  
Service calls for issues that could have been solved by  
using this table may not be covered under the  
warranty. Please rule out any of these issues before  
calling customer service.  
1. Turn the washer off by rotating the cycle selector to the  
Off position. Any running program will then be  
cancelled. Disconnect the mains plug.  
2. Allow the water in the drum to cool off.  
3. Allow the washer drum to come to a stand still (no  
longer spinning).  
4. Before opening the washer door, perform the drain  
procedure included in the pump maintenance section  
following.  
5. Loosen screws and remove the protective foil.  
6. The washing machine door can then be opened.  
Pull the emergency release downwards with a tool and  
release.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Determing the Problem  
Problem  
Possible cause(s)  
Solution(s)  
Washer door cannot be Child lock is activated.  
opened.  
Deactivated Child lock (press and hold Start/Pause for  
5 seconds).  
A power failure occured.  
If a cycle is interrupted by a power failure, it will  
resume when the power is restored.  
Cycle is running, or water level is  
Wait until the cycle ends.  
high or hot.  
Electric power cord has become  
loose or unplugged.  
Make sure the electric cord is securely plugged in.  
Cycle selector turned to Off before Turn the cycle selector to a cycle.  
end of cycle.  
Select No spin.  
In order to exit the cycle, set the cycle selector to  
Spin/Drain or select a spin speed range, then press  
the Start/Pause button.  
Emergency door lock released is  
activated.  
Door still cannot be  
opened, even after  
turning the washer Off  
and back on again.  
Child lock is activated  
Deactivated Child lock (press and hold Start/Pause for  
5 seconds).  
Door is locked for safety reasons  
(high water level, temperature of  
water hot, or high drum speed  
(drum is turning).  
Wash cycle time is  
increaed.  
Your washer utilizes sensors to  
monitor certain characteristics of  
the wash load. Increases in wash  
cycle time could be due to:  
Solutions are based on the specific reason the wash  
time has been extended.  
Excess suds.  
Use less detergent.  
The automatic unbalanced load  
Always load the washer with a mixture of large and  
detection system spins the laundry small wash items (easier to distribute in the drum).  
several times to ensure even distri-  
bution.  
Cycle does not start -  
Start/Pause flashes.  
Start/Pause button not pressed /  
selected?  
Press the Start/Pause button to start the cycle.  
Washer door is not closed properly. Check if laundry is caught in the door. Close the door  
until a click is heard, the cycle should start.  
Cycle does not start -  
Delay start-Time is dis- selected and activated.  
played.  
Cycle ending time has been  
Wash cycle will begin at proper time to complete at  
the selected finish time.  
Cycle does not start -  
D symbol flashes.  
Child lock is activated.  
Deactivate Child lock (press and hold Start/Pause for  
5 seconds).  
Detergent residue  
remains in the deter-  
gent dispenser.  
Dry detergent may have been damp Clean and dry the detergent dispenser.  
or lumpy.  
Excess liquid detergent may have  
been added.  
See Adding the correct amount of HE detergent to  
determine proper detergent usage.  
Use the dosing cup for liquid deter- Clean and dry the detergent dispenser.  
gent when dosing powder deter-  
gent. Powder detergent may have  
been damp or lumpy.  
Water does not appear Start/Pause selected?  
Select Start/Pause.  
Turn on water faucet.  
Eliminate the cause.  
to be coming into the  
washer, or detergent is  
Supply hose kinked or pinched  
not washed away.  
Water faucet not turned on.  
(reduce flow).  
Water supply hose strainers  
clogged.  
Clean the water inlet strainers.  
Eliminate the cause.  
Water pressure too low.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem  
Possible cause(s)  
Solution(s)  
Water cannot be seen The water level in your high effi-  
No action needed.  
in the drum.  
ciencey front load washer is below  
the visible part of the drum, this is  
normal.  
Water has not drained Suds may be excessive (usually  
Use less detergent for future loads. Be sure to use  
completely.  
due to too much detergent or non- only high efficiency HE-detergents.  
HE detergent being used).  
No spin is selected.  
In order to exit the cycle, set the cycle selector to  
Spin/Drain or select a spin speed range, then press  
the Start/Pause button.  
Pump is blocked.  
Check and clean the drain pump, water drain hose  
and/or the drain pipe.  
Drain hose or drain pipe is blocked. Clean drainage pipe and/or drainage hose.  
Water is coming out  
from the underneath  
the washer.  
Water supply hose is leaking: is not Eliminate the cause: tighten the hose (by hand at the  
screwed on tight at both ends, or  
rubber washer not placed in hose.  
washer end), check for rubber washer in place.  
Drain hose is leaking.  
Check the drain hose, be sure that it is on the washer  
securely with the clamp in place; may need to replace  
the drain hose if leaking continues.  
Foam comes out of the Too much detergent was used, or a Immediate fix: mix 1 tablesponful of fabric softener  
detergent dispenser  
drawer.  
non-HE detergent was used; pump with 1/2 liter (1 pint) of water and pour this mixture  
was not able to pump out the  
increased suds.  
into the detergent compartment (not with waterproof  
fabrics).  
The cyle status  
To prevent: use less detergent for future wash loads.  
sequence Washflashes  
in the display.  
Repeated spinning.  
The Unbalanced Load Detection  
system ia attempting to balance the large and small wash items (easier to distribute in the  
To prevent: always load the washer with a mixture of  
load through repeated spins.  
drum).  
No spin took place  
(laundry is still wet).  
Load size to small.  
Add more laundry.  
Large items may have become  
entangled in the drum and could  
not be distributed by the Unbal-  
anced Load Detection system; spin  
cycle therefore canceled for safety  
reasons.  
To prevent: always load the washer with a mixture of  
large and small wash items (easier to distribute in the  
drum).  
Excessive suds: too much deter-  
Immediate fix: mix 1 tablesponful of fabric softener  
gent was used, or a non-HE deter- with 1/2 liter (1 pint) of water and pour this mixture  
gent was used.  
into the detergent compartment (not with waterproof  
fabrics).  
To prevent: use less detergent for future wash loads.  
Brush off when laundry is dry or  
Detergent residue on  
the laundry.  
Some phosphate-free detergents  
contain water-insoluble residues  
may appear as light spots on the  
laundry.  
execute the program Rinse.  
System shakes or  
shudders when spin  
speed increases.  
The washer drum suspension sys- Mix small and large laundry items together in the load  
tem shifts during spinning as the to minimize this effect. Check to be sure the washer is  
speed increases. This may result in level and all four feet press equally against the floor.  
a slight shaking of the washer  
during the spin speed transition.  
Transport bolts removed?  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error messages  
Display  
Fault  
Measure  
E:16  
Door not closed properly.  
Check to be sure no laundry is caught in the washer  
door. Close the door securely.  
E:17  
Water tap not turned on.  
Turn on water tap.  
Water supply hose kinked or  
pinched closed.  
Eliminate the cause, replace the hose if damage.  
Strainer in water supply hose  
clogged.  
Clean the water inlet strainer.  
Eliminate the cause.  
Water pressure too low.  
E:18  
Too much detergent used or non-  
HE detergent used.  
Use less detergent for future loads. Only use HE deter-  
gents.  
Pump is blocked (obstructed).  
Clean the washer drain hose and/or the drain pipe.  
May need to perform pump maintenance to clear  
blockage.  
Other displays  
Turn off machine, wait 5 seconds and turn on again. If  
the display shows again, call customer service.  
NOTICE: Error messages should be listed here. Include  
those that the customer can benefit by seeing and  
understanding what the code means. Some error codes  
can only inform the customer to call Customer Service.  
Customer service  
Contact our Customer Service Department if your  
appliance needs repair. Our central Customer Service  
will be happy to supply you with details on a center close  
to you.  
E-Nr. and FD (serial) number:  
When you contact our Customer Service, please have  
the E-Nr. (model number) and the FD (serial) number for  
your appliance available. You can find the identification  
plate with these numbers on the underside of the  
appliance and in the appliance booklet.  
Questions? Please contact us. We look forward to  
hearing from you!  
ꢀꢉꢊꢂꢂꢉꢁꢇꢇꢉꢆꢁꢂꢇ  
ZZZꢈERVFKꢉKRPHꢈFRP  
ꢀꢁꢂꢀꢃ0DLQꢃ6WUHHWꢄꢃ6XLWHꢃꢅꢂꢂ  
,UYLQHꢄꢃ&$ꢃꢁꢆꢅꢀꢇ  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
STATEMENT OF LIMITED PRODUCT WARRANTY  
Product proves to have been manufactured with a defect  
Bosch Clothes Washer  
in materials or workmanship. If reasonable attempts to  
repair the Product have been made without success,  
then Bosch will replace your Product (upgraded models  
may be available to you, in Bosch's sole discretion, for  
an additional charge). All removed parts and  
components shall become the property of Bosch at its  
sole option. All replaced and/or repaired parts shall  
assume the identity of the original part for purposes of  
this warranty and this warranty shall not be extended with  
respect to such parts. Bosch's sole liability and  
What this Warranty Covers & Who it Applies to: The  
limited warranty provided by BSH Home Appliances  
Corporation (Bosch) in this Statement of Limited Product  
Warranty applies only to the Bosch Clothes Washer  
("Product") sold to you, the first using purchaser, but  
strictly conditioned on the Product having been  
purchased: (1) for your normal, household (non-  
commercial) use, and has in fact at all times only been  
used for normal household purposes (any commercial  
use or setting of the Product automatically voids the  
warranty); (2) new at retail (not a display, "as is", or  
previously returned model) purchased directly by the  
end-user consumer, and not for resale, or commercial  
use; and (3) within the United States or Canada, and has  
at all times remained within the country of original  
purchase. The warranties stated herein apply only to the  
first purchaser of the Product and are not transferable.  
Bosch reserves the right to request proof of purchase at  
the time any warranty claim is submitted to confirm that  
the Product falls within the scope of this limited product  
warranty. The warranty is automatically void if the Product  
was a display model, sold "as is", tampered with, a  
damaged or "scratch and dent" model, or a previously  
returned model, a free give-away, charitable donation or  
contest prize.  
responsibility hereunder is to repair manufacturer-  
defective Product only, using a Bosch-authorized service  
provider during normal business hours. For safety and  
property damage concerns, Bosch highly recommends  
that you do not attempt to repair the Product yourself, or  
use an un-authorized servicer; Bosch will have no  
responsibility or liability for repairs or work performed by  
a non-authorized servicer. If you choose to have  
someone other than an authorized service provider work  
on your Product, THIS WARRANTY WILL  
AUTOMATICALLY BECOME NULL AND VOID. Authorized  
service providers are those persons or companies that  
have been specially trained on Bosch products, and who  
possess, in Bosch's opinion, a superior reputation for  
customer service and technical ability (note that they are  
independent entities and are not agents, partners,  
affiliates or representatives of Bosch). Notwithstanding  
the foregoing, Bosch will not incur any liability, or have  
responsibility, for the Product if it is located in a remote  
area (more than 100 miles from an authorized service  
provider) or is reasonably inaccessible, hazardous,  
threatening, or treacherous locale, surroundings, or  
environment; in any such event, if you request, Bosch  
would still pay for labor and parts and ship the parts to  
the nearest authorized service provider, but you would  
still be fully liable and responsible for any travel time or  
other special charges by the service company, assuming  
they agree to make the service call.  
Limitation for Third Party Accessories and Water  
Supply Hoses: Third party accessories, including water  
supply hoses other than those shipped with your Bosch  
washer, and any consequential damages resulting  
therefrom, are not covered by this warranty. This  
limitation expressly includes the implied warranties of  
merchantability and fitness for a particular purpose,  
which are also expressly excluded with respect to third  
party accessories, including water supply hoses other  
than those shipped with your Bosch washer. Use of third  
party accessories, including water supply hoses other  
than those shipped with your Bosch washer, does not  
void this warranty on any other part, and all other  
provisions of this warranty remain in effect.  
LENGTH OF WARRANTY  
2 year Limited Warranty on Drive Motor from Date of  
Purchase  
Please make sure to return your registration card; while  
not necessary to effectuate warranty coverage, it is the  
best way for Bosch to notify you in the unlikely event of a  
safety notice or product recall.  
How Long the Warranty Lasts: Bosch warrants that the  
Product is free from defects in materials and  
workmanship for a period of three hundred sixty-five days  
(365) days from the date of purchase. The foregoing  
timeline begins to run upon the date of purchase, and  
shall not be stalled, tolled, extended, or suspended, for  
any reason whatsoever.  
Repair/Replace as Your Exclusive Remedy: During this  
warranty period, Bosch or one of its authorized service  
providers will repair your Product without charge to you  
(subject to certain limitations stated herein) if your  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SCOPE OF WARRANTY  
PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS  
EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER  
BE LIABLE FOR CONSEQUENTIAL, SPECIAL,  
Bosch will repair or replace, free of charge any motor or  
component part of the motor that proves defective under  
conditions of normal home use during the first 2 years  
from the date of purchase, labor charges excluded.  
INCIDENTAL, INDIRECT, "BUSINESS LOSS", AND/OR  
PUNITIVE DAMAGES, LOSSES, OR EXPENSES,  
INCLUDING WITHOUT LIMITATION TIME AWAY FROM  
WORK, HOTELS AND/OR RESTAURANT MEALS,  
REMODELLING EXPENSES IN EXCESS OF DIRECT  
DAMAGES WHICH ARE DEFINITIVELY CAUSED  
EXCLUSIVELY BY Bosch, OR OTHERWISE. SOME  
STATES DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, AND SOME STATES DO NOT ALLOW  
LIMITATIONS ON HOW LONG IMPLIED WARRANTY  
LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY  
TO YOU. THIS WARRANTY GIVES YOU SPECIFIC  
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE. No  
attempt to alter, modify or amend this warranty shall be  
effective unless authorized in writing by an officer of BSH.  
Out of Warranty Product: Bosch is under no obligation,  
by law or otherwise, to provide you with any concessions,  
including repairs, pro-rates, or Product replacement,  
once this warranty has expired.  
Warranty Exclusions: The warranty coverage described  
herein excludes all defects or damage that are not the  
direct fault of Bosch, including without limitation, one or  
more of the following: (1) use of the Product in anything  
other than its normal customary and intended manner  
(including without limitation, any form of commercial use,  
use or storage of an indoor product outdoors, use of the  
Product in conjunction with air or water-going vessels);  
(2) any party's willful misconduct, negligence, misuse,  
abuse, accidents, neglect, improper operation, failure to  
maintain, improper or negligent installation, tampering,  
failure to follow operating instructions, mishandling,  
unauthorized service (including self-performed "fixing" or  
exploration of the appliance's internal workings); (3)  
adjustment, alteration or modification of any kind; (4) a  
failure to comply with any applicable state, local, city, or  
county electrical, plumbing and/or building codes,  
regulations, or laws, including failure to install the  
product in strict conformity with local fire and building  
codes and regulations; (5) ordinary wear and tear, spills  
of food, liquid, grease accumulations, or other  
How to Obtain Warranty Service: To obtain warranty  
service for your Product, you should contact the nearest  
Bosch authorized service center.  
BSH Home Appliances Corporation - 1901 Main Street,  
Suite 600, Irvine, CA 92614 / 800-944-2904  
substances that accumulate on, in, or around the  
Product; and (6) any external, elemental and/or  
environmental forces and factors, including without  
limitation, rain, wind, sand, floods, fires, mud slides,  
freezing temperatures, excessive moisture or extended  
exposure to humidity, lightning, power surges, structural  
failures surrounding the appliance, and acts of God. In  
no event shall Bosch have any liability or responsibility  
whatsoever for damage to surrounding property,  
including cabinetry, floors, ceilings, and other structures  
or objects around the Product. Also excluded from this  
warranty are scratches, nicks, minor dents, and cosmetic  
damages on external surfaces and exposed parts;  
Products on which the serial numbers have been altered,  
defaced, or removed; service visits to teach you how to  
use the Product, or visits where there is nothing wrong  
with the Product; correction of installation problems (you  
are solely responsible for any structure and setting for  
the Product, including all electrical, plumbing or other  
connecting facilities, for proper foundation/flooring, and  
for any alterations including without limitation cabinetry,  
walls, floors, shelving, etc.); and resetting of breakers or  
fuses. TO THE EXTENT ALLOWED BY LAW, THIS  
WARRANTY SETS OUT YOUR EXCLUSIVE REMEDIES  
WITH RESPECT TO PRODUCT, WHETHER THE CLAIM  
ARISES IN CONTRACT OR TORT (INCLUDING STRICT  
LIABILITY, OR NEGLIGENCE) OR OTHERWISE. THIS  
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,  
WHETHER EXPRESS OR IMPLIED. ANY WARRANTY  
IMPLIED BY LAW, WHETHER FOR MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, OR  
OTHERWISE, SHALL BE EFFECTIVE ONLY FOR THE  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904  
*9000826642*  
9000826642  
9309  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Black Box Network Card Remote Port USB User Manual
Black Decker Hot Beverage Maker JKC680 CL User Manual
Bock Water heaters Water Heater Residential Power Gas Water Heater User Manual
Bose Headphones SIE2 User Manual
Boss Audio Systems Car Video System bv9963i User Manual
Bravetti Food Processor FP86H User Manual
Brown Stove Works Range 24 Range User Manual
Canon Oven PIXMA MP560 User Manual
Carrier Air Conditioner 50XCA06 24 User Manual
Casio Fitness Electronics PDM 30B User Manual