TKF 8439 A
Dryer
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1 Your Dryer
Overview .............................................4
Technical Specifications.......................5
4
table..................................................18
Programme table...............................18
Auxiliary function................................19
Drying degree ..................................19
Anti-creasing ...................................19
Changing the contrast .......................19
Warning indicators.............................19
Changing the delay time....................20
Canceling the time delay....................20
Starting the programme.....................20
Progress of programme.....................20
Changing the programme after it has
started...............................................21
Child-proof lock.................................21
Finishing by canceling the programme2 1
End of programme ............................22
2 Important safety instructions6
General safety .....................................6
Intended use .......................................7
Children’s safety ..................................7
3 Installation
Appropriate installation location ...........8
Removing the transportation safety
8
assembly.............................................8
Under counter installation ....................8
Mounting over a washing machine.......8
Connection to water drain; ..................9
Adjusting the feet.................................9
First use ..............................................9
Disposing of packaging material ..........9
Transportation of the machine .............9
Disposing of the old machine.............10
7 Maintenance and cleaning 23
Filter Cartridge / Door Inner Surface...23
Sensor ..............................................23
Water tank;........................................23
For the condenser ............................24
4 Electrical Connection
11
8 Suggested solutions for
Attention!...........................................11
Electrical requirements.......................11
Fitting a different plug .......................11
Washer/dryer combination.................11
problems
25
26
27
9 Guarantee
10 Service
5 Initial preparations for drying12
Things to be done for energy saving ..12
Laundry suitable for drying in the
machine ............................................12
Laundry unsuitable for drying in the
machine ............................................12
Preparing laundry for drying...............13
Correct load capacity ........................13
6 Selecting a Programme and
OperatingYour Machine
15
Control panel.....................................15
Preparing the machine.......................16
Programme selection.........................16
Time display ......................................17
Programme selection and consumption
Download from Www.Somanuals.com.EANll Manuals Search And Download.
3
1 Your Dryer
Overview
6
1
5
4
3
2
1- Control panel
2- Adjustable feet
4-Rating plate
5- Fluff filter
6- Power cord
3-Kick plate
Download from Www.Somanuals.c4om. All Manuals Search And Download.
EN
Technical Specifications
EN
2
Height (adjustable)
Width
84,6 cm
59,5 cm
59,8 cm
8 kg
Depth
Capacity (max.)
Weight (net)
Voltage
38 kg
Rated power input
Model code
See rating plate
Type label is located behind the loading door.
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are
obtained in laboratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the appliance, values may vary.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
5
2 Important safety instructions
This section includes safety information
that will help protection from risks of
personal injuries or materialistic damages.
or adaptors to connect the dryer to
power supply in order to decrease the
risk of electric shock.
Failure to follow these instructions
shall cause any warranty and reliability
commitment to become void.
General safety
• Do not make any changes on the plug
supplied with the product. If it is not
compatible with the socket, have a
qualified electrician change the socket
with a suitable one.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should
not be dried in the product since they
emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry unwashed items in the dryer.
• Items soiled with cooking oils,
acetone, alcohol, fuel oil, kerosene,
stain remover, turpentine, paraffin and
paraffin removers must be washed
in hot water with plenty of detergent
before being dried in the dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried
in the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• This product must be earthed.
Grounding installation decreases the
risk of electric shock by opening a path
with low resistance for the electricity
flow in case of a malfunction or failure.
Power cable of this product is equipped
with a conductor and a grounding
plug that allows for grounding the
product. This plug must be installed
appropriately and inserted into a socket
which is grounded in accordance with
the local laws and regulations.
• Never place the machine on a carpet-
covered floor, otherwise, lack of airflow
beneath the machine may cause
electrical parts to overheat. This will
cause problems with your machine.
• If the power cable or mains plug is
damaged, you must call Authorised
Service Agent for repair.
• The product should not be plugged
in during installation, maintenance
and repair works. Such works should
always be made by the technical
service. Manufacturer shall not be held
responsible for damages arising from
processes carried out by unauthorised
persons.
• Connect the product to a grounded
outlet protected by a fuse of suitable
capacity as stated in the technical
specifications table.
• Operate your product at temperatures
between +5°C and +35°C.
• Do not use electrical devices in the
product.
• Do not connect the air exit of the
product to the chimney holes which
are used for the exhaust fumes of the
devices operating with gas or other
types of fuel.
• You must provide enough ventilation
in order to prevent gases exiting from
devices operating with other types of
fuels including the naked flame from
accumulating in the room due to the
back fire effect.
• Always clean the lint filter before or after
each loading.
• Never operate your dryer without the
lint filter installed.
• Do not install the product behind a door
with a lock, sliding door or a door that
has a hinge against the hinge of the
dryer.
• Do not install or leave this product
in places where it will be exposed to
• Do not allow fibre, dust and dirt
accumulation around the exhaust exit
and at adjacent areas.
• Power cable plug must be within easy
reach after installation.
• Do not use extension cords, multi-plugs
Download from Www.Somanuals.c6om. All Manuals Search And Download.
EN
outdoor conditions.
• Underwear that contains metal
reinforcements should not be placed in
a dryer. Damage to the dryer can result
if metal reinforcements come loose
during drying.
• Do not tamper with the controls.
• Do not perform any repair or part
replacing procedures on the product
even if you know or have the ability to
perform unless it is clearly suggested
in the operating instructions or the
published service manual.
• Check all garments for forgotten
lighters, coins, metal pieces, needles,
etc. before loading.
• Inside and exhaust duct of the product
must be cleaned by the qualified
service personnel periodically.
• Wrong connection of grounding
conductor of the product can cause
electric shock. If you have any suspect
about the grounding connection, have
it checked by a qualified electrician,
service representative or service
personnel.
• Do not reach into the machine when
the drum is spinning.
• Unplug the machine when it is not in
use.
• Never wash down the appliance with
water! There is the risk of electric shock!
Always disconnect by unplugging from
the mains before cleaning.
•
At times when your dryer is not in
use or after the laundry is taken out
following the completion of drying
process, turn off by using the On/
Off button. In cases when the On/
Off button is on (while the dryer is
energized), keep the door of the dryer
closed.
Intended use
• This product has been designed for
domestic use. It should not be used for
other purposes.
• Use the product only for drying laundry
that are marked accordingly.
• Dry only those articles in your product
that are stated in this manual.
• This product is not intended to be
used by persons with physical, sensory
or mental disorders or unlearned
or inexperienced people (including
children) unless they are attended by
a person who will be responsible for
their safety or who will instruct them
accordingly for use of the product.
Children’s safety
• Never touch the plug with wet hands.
Never unplug by pulling on the cable,
always pull out by grabbing the plug
only. Do not operate the machine if the
power cable or plug is damaged!
• Never attempt to repair the machine
yourself, otherwise, you will be putting
your life and others’ lives in danger.
• For malfunctions that cannot be solved
by following the information given in the
safety instructions:
• Electrical appliances are dangerous for
the children. Keep children away from
the machine when it is operating. Do
not let them tamper with the machine.
• Packaging materials are dangerous to
children. Keep the packaging materials
out of reach of children or dispose
them by classifying according to waste
directives.
Turn off the machine and contact an
authorised service agent.
• Do not stop the dryer before the drying
cycle comes to an end unless you will
remove all laundry from the dryer fast
in order to lay them and dissipate the
heat.
• Do not allow children sit/climb on or
enter in the product.
• Remove the door of the drying
compartment before decommissioning
or disposing of the product.
• Children should be supervised to
ensure that they do not play with the
product.
• The final step of the drying cycle (cool-
down cycle) occurs without applying
heat to ensure that the items are left
at a temperature that will not damage
them.
• Close the loading door when you leave
the area where the product is located.
• Fabric softeners or similar products
should be used as specified by the
fabric softener instructions.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
7
3 Installation
Refer to the nearest Authorised Service
Agent for installation of your product.
C Preparation of location and electrical
installation for the product is under
customer’s responsibility.
BInstallation and electrical connections
must be carried out by a qualified
personnel.
A Prior to installation, visually check if the
product has any defects on it. If so, do
not have it installed. Damaged products
will cause risks for your safety.
Appropriate installation location
• Install the product in an environment
which has no risk of freezing and is in a
stable and level position.
AMake sure that you have removed
the transportation safety assembly
(nylon+styrofoam pieces) before using
the product for the first time. Do not
leave any items inside the drum.
• Operate your product in a well
ventilated, dust-free environment.
• Do not block the air ducts in front of
and under the product with materials
such as long pile rugs and wooden
bands.
Under counter installation
• It should never be operated without the
top trim.
• Leave at least 3 cm of space between
the side and rear walls of the product
and the walls of the counter/cupboard
when installing your product under a
counter or in a cupboard.
Mounting over a washing machine
• A fitting device should be used between
the two machines when installing above
a washing machine. The bracket must
be installed by the Authorised Service
Agent.
• Place the product on a firm floor. If
it will be placed on top of a washing
machine, the approximate weight of
both machines may reach 180 kg when
they are full. Therefore, the floor must be
capable of carrying the load on it!
• The bracket can be supplied from the
Authorised Service Agent.
Connection to water drain;
In products equipped with a condenser unit
the water accumulated during the drying
cycle is collected in the water tank. You
should drain the accumulated water after
each washing cycle.
You can directly send the accumulated
water out through the water drain hose
supplied with the machine instead of
periodically draining the water collected in
the water tank.
• Do not place your product on a long
pile rug or on similar surfaces.
• Do not install the product behind a door
with a lock, sliding door or a hinged
door which can strike the product.
• Once the product is installed, it should
stay at the same place where its
connections have been made. When
installing the product, make sure
that the rear wall of it does not touch
anywhere (tap, socket, etc.) and also
pay attention to install the product at a
place where it will stay permanently.
B Do not place the product on top of the
power cable.
• Keep at least 1.5 cm distance to walls
of other furniture.
Removing the transportation
safety assembly
ARemove the transportation safety
assembly before using the product for
the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum
that contains a piece of styrofoam. Hold
it from its section marked with XX.
3. Pull the nylon towards yourself and
remove the transportation safety
assembly.
Download from Www.Somanuals.c8om. All Manuals Search And Download.
EN
Connecting the water drain hose;
Adjusting the feet
In order to ensure that your machine
operates more silently and vibration-free, it
must stand level and balanced on its feet.
Balance the machine by adjusting the feet.
Rotate the feet to adjust until the machine
stands level and firmly.
C Never unscrew the adjustable feet from
their housings.
First use
1. Remove the hose on the machine by
pulling it out from its end. Do not use
any tools to take out the hose.
2. Connect the special drain hose supplied
with the machine to the pipe fitting.
3. The other end of the drain hose can be
directly connected to the wastewater
drain or to the washbasin. The fitting
must always be secured in all types of
connections. Your house may be flooded
if the hose gets out of its housing during
water discharge.
• To have the product ready for operation
before calling the authorised service
agent, make sure that its location
and power supply installations are
appropriate. If they are not, call a
qualified electrician to have any
necessary arrangements carried out.
• Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.
Important:
• The hose should be attached to a height
of maximum 80 cm.
• You must be careful not the pinch or
bend the hose.
• The end of the hose should not be bent,
it should not be stepped on and it must
not be folded between the drain and the
machine.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
other connections.
3. Drain water remained in the machine
completely before transportation.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
9
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.
Download from Www.Somanuals1.c0om. All Manuals Search And Download.
EN
4 Electrical Connection
worktop.
Make sure that you have an earthed
power outlet socket rated at 13 amps
(minimum).
A Undercounter installation without the
top cover must only be carried out by an
authorised agent.Risk of electric shock.
A Important
Attention!
If you use your dryer as built-in,
the socket must be reachable after
installation, or a separate switch (which
can disconnect the two poles) must
be used in the installation. Check for
suitability.
Fitting a different plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying
the terminals on your plug, proceed as
follows:
For a permanent connection, a master
switch with at least 3mm contact
clearance and minumum 13 A rating
must be used.
1 Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2 Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3 Connect the brown (live) wire to
the terminal in the plug marked ‘L’ or
coloured red.
With the alternative plugs a 13A fuse
must be fitted either in the plug or
adaptor or in the main fuse box. If in
doubt contact a qualified electrician.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket in a
readily accessible position.
Should the mains lead of the appliance
become damaged or need replacing at
any time, it must be replaced by a special
purpose made mains lead which can only
be obtained from a Authorised Service
Agent.
Green and yellow
or green
A Warning
This appliance must be earthed
If the fitted moulded plug is not suitable
for your socket, then the plug should be
cut off and an appropriate plug fitted.
The moulded plug on this appliance
incorporates a 13A fuse. Should the fuse
need to be replaced an ASTA approved
BS1362 fuse of the same rating must
be used. Do not forget to refit the fuse
cover. In the event of losing the fuse
cover, the plug must not be used until a
replacement fuse cover has been fitted.
Colour of the replacement fuse cover
must be the same colour as that visible
on the pin face of the plug. Fuse covers
are available from any good electrical
store.
N
L
Blue or black
Brown or red
Washer/dryer combination
Do not stack washing machine on top
of the tumble dryer. This would damage
both appliances and guarantees would
become void. It is also unsafe to stack
an appliance on top of another without
using a suitable and approved stacking
kit obtained from the manufacturer of the
appliances.
In order to avoid hazards, damaged
supply cord should be replaced by the
manufacturer, its service agent or similarly
• A special stacking kit is required as an
optional extra please contact customer
service.
qualified people.
Built-under installation
This appliance can be installed under a
Download from Www.Somanuals.com.EANll Manuals Search And Download.
11
5 Initial preparations for drying
Things to be done for energy
saving:
• Make sure that you operate the product
at its full capacity but pay attention to
not exceeding it.
A B C D
Low
• Spin your laundry at the highest speed
possible when washing them. Thus,
the drying time is shortened and energy
consumption is decreased.
l n m
o p q
• Pay attention to dry same types of
laundry together.
• Follow the instructions in the user
manual for programme selection.
• Make sure that sufficient clearance
is provided at the front and rear side
of the dryer for air circulation. Do not
block the grill at the front side of the
product.
• Do not open the door of the machine
during drying unless necessary. If you
Laundry unsuitable for drying in
the machine
must certainly open the door, pay
attention not to keep it open for a long
time.
• Laundry items with metal attachments
such as belt buckles and metal buttons
can damage your dryer.
• Do not add new (wet) laundry during
drying.
• Do not dry items such as woollens, silk
garments and nylon stockings, delicate
embroidered fabrics, laundry with metal
accessories and items such as sleeping
bags in the dryer.
• Lint and fibres released from the
laundry to the air during the drying
cycle are collected in the “Lint Filter”.
Make sure that you clean the filters
before or after each drying.
• Laundry made of delicate and valuable
fabrics as well as lace curtains can be
creased. Do not dry them in the dryer!
• Do not dry items made of hermetic
fibres such as pillows and quilts in the
dryer.
• Laundry made of foam or rubber will be
deformed.
• Do not dry laundry containing rubber in
the dryer.
• Do not dry laundry exposed to
petroleum, oil, combustible or explosive
agents in the dryer even if they are
washed beforehand.
• Overly wet laundry or laundry with
dripping water must not be put into the
dryer.
• Items cleaned or washed with gasoil/
fuel oil, dry-laundry solvents and other
combustible or explosive materials as
well as the items that are contaminated
or spotted with such materials should
not be dried in the product since they
• In models with condenser, make sure
that you clean the condenser regularly
at least once every month or after every
30 drying cycles.
• In vented models, follow the vent hose
connection rules in the user manual
and pay attention to the vent hose
cleaning.
• Ventilate the room, where the dryer is
located, well during drying.
• For power saving in models with lamps,
at times when your dryer is not in
use, keep the door closed if the On/
Off button is pressed (if the dryer is
energized).
Laundry suitable for drying in the
machine
C Always follow the suggestions on the
laundry labels. Dry only the laundry
having a label stating that they are
suitable for drying in a dryer and make
sure that you select the appropriate
programme.
Download from Www.Somanuals1.c2om. All Manuals Search And Download.
EN
emit flammable or explosive vapor.
• Do not dry items cleaned with industrial
chemicals in the dryer.
• Do not dry your unwashed laundry in the
dryer.
Correct load capacity
• Items soiled with cooking oils, acetone,
alcohol, fuel oil, kerosene, stain remover,
turpentine, paraffin and paraffin removers
must be washed in hot water with plenty
of detergent before being dried in the
dryer.
• Garments or pillows bolstered with
rubber foam (latex foam), shower
bonnets, water resistant textiles,
materials with rubber reinforcement and
rubber foam pads should not be dried in
the dryer.
• Do not use fabric softeners and
anti-static products unless they are
recommended by the manufacturers of
the fabric softener or the product.
• Do not dry the underwear reinforced with
metal parts in the dryer. If these metal
reinforcements loosen and break during
drying, they will damage your dryer.
Preparing laundry for drying
• Check all laundry items before loading
them into the product to make sure that
there are no lighters, coins, metal items,
needles and etc. in their pockets or on
any part of them.
A Consider the information in the
“Programme Selection Table”. Always
start the programme in accordance
with the maximum load capacity.
C Adding laundry to the machine more
than the level shown in the figure is not
recommended. Drying performance
will degrade when the machine is
overloaded. Furthermore, your dryer
and your laundry can be damaged.
C Place your laundry into the drum
loosely so that they will not get tangled.
• Fabric softeners and similar products
must be used in accordance with the
instructions of the manufacturer of the
relevant products.
• All laundry must be spun at the highest
spin speed that your washing machine
allows for the laundry type.
• Laundry may be tangled after washing.
Separate your laundry before placing
them into your dryer.
• Sort your laundry according to their types
and thicknesses. Dry the same type of
laundry together. E.g.: fine kitchen towels
and table cloths dry faster than the thick
bath towels.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
13
Following weights are given as examples.
Approximate
Home articles
weights (g)
Cotton quit covers
(double)
1500
Cotton quit covers (single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
1000
500
350
700
250
100
700
350
Bath towels
Hand towels
Approximate
weights (g)
Garments
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
150
300
200
500
350
700
100
125
Handkerchiefs (10 pieces)
T-Shirts
Loading
• Open the loading door.
• Place laundry items loosely into the
dryer.
• Push the loading door to close. Ensure
that no items are caught in the door.
Download from Www.Somanuals1.c4om. All Manuals Search And Download.
EN
6 Selecting a Programme and OperatingYour Machine
Control panel
4
1
2
3
5
9
8
7
6
1. Washing machine spin speed*/Timer pro-
gramme selection
5. On/Off button
Used to turn on and off the machine.
Spin speed used to spin the laundry in the
washing macthine / Indicates the time for
timer programs.
6. Anti-creasing
Prevents the laundry from creasing after the
machine completes its programme.
7. Dryness level
2. Display
Indicates the status of the machine.
3. Start/Pause/Cancel button
Used to start, pause or cancel the
programme.
Used to adjust the required dryness level.
8. Cancel audio warning
Used to cancel the audio warning given at
the end of the programme.
4. Programme selection knob
Used to select a programme.
9.Time delaying buttons
Used to set the time delay.
Child-proof lock warning icon
Time delaying mode
Spin speed / Timer programmes
Operation icon
Door open warning icon
Anti-creasing mode
Pause icon
Water tank full warning icon
Filter cleaning warning icon
Condenser cleaning warning icon
Remaining time indicator
Audio warning level / Cancel audio warning
Drying degree
Anti-creasing is activated
Spin speed is used to show the remaining time more accurately.
It does not affect the performance of your machine.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
15
synthetic/cotton blended laundry, etc.).
C Do not dry curtains and lace in your
machine.
Preparing the machine
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the “On/Off” button.
C Pressing the “On/Off” button does not
necessarily mean that the programme
has started. Press “Start/Pause/
Cancel” button of the machine to start
the programme.
Special programmes
For special cases, there are also extra
programmes available:
C Additional programmes may differ
according to the model of your
machine.
•Mini 35’
Programme selection
You can use this programme to dry your
cotton laundry that you have spun at
high speeds in your washing machine. 2.
This program dries 2 kg cotton laundry (2
Shirts / 5 T-shirts) in 35 minutes.
Decide the appropriate programme from
the table below which includes drying
temperatures in degrees. Select the
desired programme with the programme
selection knob.
C To obtain better results from your
dryer, your laundry must be washed
at suitable programmes and spun at
the recommended spin speeds in the
washing machine.
Drying at high
temperature only for
cotton laundry. Thick
and multi layered
Extra dry
laundry (E.g.: towels,
linens, jeans) are dried
in a way that they do
not require ironing
before placing in the
wardrobe.
Normal laundry (E.g.:
tablecloths, underwear)
are dried in a way that
they do not require
ironing before placing
in the wardrobe.
•Shirts
This programme dries the shirts more
sensitively and creases them less and
thus, helps to iron them more easily.
C There may be a little humidity on your
shirts at the end of the programme. We
recommend you not to leave the shirts
in the dryer.
•Jeans
Wardrobe dry
Iron dry
You can use this programme to dry your
jeans that you have spun at high speeds
in your washing machine.
C Review the relevant section in the
programme table.
Normal laundry (E.g.,
Shirts, dresses) are
dried ready to be
ironed.
•Mix
Used to dry synthetic and cotton laundry
that do not release colour. Used for
laundry that is suitable for drying.
•Sportswear
C For further programme details, see,
"Programme Selection Table"
Used to dry the laundry that are made
of synthetic, cotton or mixed fabrics and
have a tag indicating that they are suitable
for drying.
Main programmes
Depending on the type of laundry, the
following main programmes are available:
•Cottons
•Wool Refresh
You can dry your durable laundry with this
programme. Dries at high temperature. It
is recommended to use for your cotton
items (such as bed sheets, quilt cover,
underclothing, etc.).
You can use this function to ventilate
and soften your woolen laundry that can
be washed in the washing machine. Do
not use this function to dry your laundry
completely. Take out your laundry and
ventilate them immediately after the
program is over.
•Synthetics
You can dry your less durable laundry
with this programme. It dries at a lower
temperature compared to the cottons
programme. It is recommended for your
synthetic laundry (such as shirts, blouses,
•Shirt 15’
You can use this feature to make 2 shirts
ready for ironing in 15 minutes.
Download from Www.Somanuals1.c6om. All Manuals Search And Download.
EN
•Lingerie
Time display
Suitable to dry the 100% synthetic or
synthetic-mixture satin type underwear
(night gown, garments for upper body,
pajamas) with the word dryable in the
washing instructions.
The display shows the time remaining
for the programme to complete while a
programme is running. Time is displayed
in hours and minutes as “02:30”. The
example display image shows the dryer
when it is running and child-proof lock is
active.
C Products with a high accessory con-
tent such as lace, veil, stone, beads
and wires and products with a high
content of silk should not be dried.
The silk laundry with cotton content or
satin look may remain wet when dried
with this program.
CProgramme duration may differ from the
values in the consumption table subject
to the changes in the water hardness
and temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in the
supply voltage..
The level of dryness may depend on the
mixture of the cloth, type of knitting and
the humidity content.
•Viscose
You can dry your Viscose laundry that
is marked that it can be dried in tumble
dryer(dresses, shirts, underwear, etc…).
Viscose/polymer, viscose/cotton mixed
laundry is also suitable for this program.
C It is not recommended to dry laundry
that has accessory of pile textile, lace,
small stones etc… Drying level can be
changeable according to the type and
mixture of laundry.
•Refresh
Only ventilation is performed for 10
minutes without blowing hot air. You can
air your clothes that have been kept at
closed environments for a long time and
deodourise unpleasant odours thanks to
this programme.
•Timer programmes
You can select one of the 10 min., 20
min., 30 min., 40 min., 50 min., 60 min.,
80 min., 100 min., 120 min., 140 min.
and 160 min. timer programmes to
achieve the desired final drying level at
low temperatures. Programme dries at
the selected time regardless of the drying
temperature.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
17
Programme selection and consumption table
Programme table
EN
2
Approximate
amount of
remaining
humidity
Drying time
(minutes)
Spin speed in washing
machine (rpm)
Programmes
Capacity (kg)
Cottons / Coloreds
Extra dry
8
8
1000
1000
1000
1200
1200
1200
1200
1000
1000
600
% 60
% 60
% 60
%50
%50
%50
%60
%60
%60
%100
%40
%50
147
137
105
35
A
A
A
Cupboard dry
Iron dry
8
Mini 35'
Shirts
2
1.5
4
40
Jeans
80
Shirt 15'
Mix
0.5
4
15
83
Sportswear
Viscose
Lingerie
Wool Refresh
4
92
1.5
1
100
50
800
1.5
600
6
Synthetics
Cupboard dry
4
800
% 40
53
B
Energy consumption values
Approximate
Spin speed in washing amount of
Energy
consumption
value kWh
Programmes
Capacity (kg)
machine (rpm)
remaining
humidity
Cottons linen cupboard dry*
Cottons Ready to iron
8
8
4
1000
1000
800
% 60
% 60
% 40
4.71
3.80
1.80
Synthetics cupboard dry
* : Energy Label standard programme (EN 61121:2012)
All values given in the table have been fixed according to EN 61121:2012 Standard.
These values may deviate from the table according to the laundry type, laundry spin
speed, environmental conditions and voltage fluctuations.
Download from Www.Somanuals1.c8om. All Manuals Search And Download.
EN
Auxiliary function
Changing the contrast
Audio Warning
Contrast can be adjusted in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.
Cancel
audio warning
Audio warning Audio warning
level 1 level 2
Audio warning
level 3
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear this buzzing or want
to change the volume level, you need to
press the “Volume level” button. No audio
warning will be given when “x” appears on
the screen.
Press and hold the Spin Speed/Time
button for 3 seconds.
When the contrast is changed at the end
of 3 seconds, all symbols on the display
will become visible for 3 seconds in order
to indicate that the process is complete.
Perform the same procedure to revert back to
the previous contrast setting.
C You can select this function either
before or after the programme starts.
Warning indicators
Drying degree
C Warning indicators may differ according
to the model of your machine.
Filter cleaning
Used to adjust the required dryness level.
More drying is performed compared to
the default settings when “+” sign appears
and less drying is performed when “-” sign
appears. Programme duration can change A warning symbol will appear to remind
depending on the selection.
A This function must be selected before
the programme starts.
filter cleaning after the programme finishes.
C f the filter cleaning symbol flashes
continuously, please refer to
“Suggested solutions for problems”.
Water tank
Anti-creasing
A warning symbol will turn on at the end
of the programme or when the tank is full
with water. The machine stops operating
if the warning symbol turns on when a
programme is running. To restart the
machine, please drain the water in the
water tank. Press “Start/Pause/Cancel”
button to start the programme after you
have emptied the water tank. The warning
symbol turns off and the programme
resumes operating.
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme is over. This
programme rotates the laundry in
600-second intervals to prevent creasing.
Press “Anti-creasing” button to activate.
Anti-creasing is activated but the
programme is running in the first
exemplary figure. Drying is over and the
first step of anti-creasing has started in the
second figure.
Cleaning the condenser
Warning symbol turns on with certain
Download from Www.Somanuals.com.EANll Manuals Search And Download.
19
intervals to remind that the condenser
needs cleaning.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause
symbol fades. Start symbol lights up.
4. The “:” in the middle of the displayed
time delay will start flashing.
Door open
Cancelling the time delay
If you want to cancel the time delay
countdown and start the programme
immediately:
Dryer door open symbol lights up.
Time delay
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel”
button to start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause” symbol will light up
to indicate that the programme has
started and “:” symbol between the
remaining time will continue flashing.
Progress of programme
With the “Time delay” function you can
delay the programme start up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Set the drying programme and spin
speed, and if required, select the
auxiliary functions.
Anti-
creasing
Drying
Wardrobe
(Extra)
3. Press “Time delaying” buttons “+” and
“-” to set the desired time delay. The
time delay symbol will flash.
Iron
Ventilation
The progress of a running programme is
shown through a number of symbols on
the screen.
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delay symbol lights up.
Start symbol lights up.
At the beginning of each programme
step, the relevant symbol in the series
of symbols will light up and thus, all
symbols will remain lit up at the end of
the programme. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried out.
“Drying”:
The “:” in the middle of the displayed time
delay will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of
the time delay countdown process, time
delay symbol fades, drying process starts
and the programme duration is displayed.
The time on the display is the total of
normal drying time and delay time.
Time delay is started by pressing the start/
pause/cancel button in the example figure.
- Lights up in all programmes apart from
drying and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“Cupboard Dry”:
Changing the delay time
If you want to change the time during the
countdown:
Starts to illuminate when the drying degree
reaches “wardrobe dry” step, and remains
illuminated until the next step.
“Extra Dry”:
Starts to illuminate when the drying degree
reach to “wardrobe dry extra” step.
“Refresh”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the
1. Press “Start/Pause/Cancel” button for
3 seconds to cancel the programme.
Time delay function must be set again
for the required time.
2. Press Time delay buttons “+” or “-” to
set the desired time delay.
Download from Www.Somanuals2.c0om. All Manuals Search And Download.
EN
end of the programme if anti-creasing
function is active.
laundry before the drying programme
has started.
C If you select a new programme by
turning the programme selection knob
while your machine is in standby,
then the current program is cancelled
and new programme information is
displayed.
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a
different program after your machine has started
to run.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all button
except the “On/Off” button on the panel
are deactivated when the child-proof lock
is active.
In order to activate the child-proof lock,
press on the “audio warning” and “anti-
creasing” buttons simultaneously for 3
seconds.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme. Select the “Extra Dry”
program by rotating the program knob.
Press “Start/Pause/Cancel” button to start
the program.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
CIf you select a new programme by
turning the programme selection knob
while your machine is running, then the
current program is cancelled and new
programme information is displayed.
Lock symbol will appear on the screen
when the child-proof lock is activated.
Adding/removing laundry in
standby mode
In order to add or take out laundry after
the start-up of the programme;
1. Press the “Start/Pause/Cancel” button
to switch the machine to “Pause”
mode. Drying process will stop.
2. Open the door at Pause position and
close it again after adding or taking out
laundry.
C Child-proof lock will also be deactivated
when the machine is restarted by
pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the
position of programme selection knob
is changed while the machine is running
or in halt.
• If the child-proof lock is deactivated
after changing the position of the
programme selection knob while your
machine is running, your machine stops
and new programme information is
displayed
3. Press “Start/Pause/Cancel” button to
start the program.
C Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the
drying process is over.
CLaundry may be added or taken out
as much as desired during a drying
process, but as this process will
interrupt drying continuously, it will
extend the program duration and
increase energy consumption.
Therefore, it is recommended to add
Download from Www.Somanuals.com.EANll Manuals Search And Download.
21
Ending the programme through
cancelling
A new programme can be selected and
started after “Program cancel” is activated
in order to change the drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for
about 3 seconds. “Lint filter cleaning” and
“Water tank” warning symbols light up and
“End” label appears on the screen as a
reminder at the end of this period.
A As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool
it down.
C If you change the position of
programme selection knob while your
machine is running, then the machine
stops, current programme is cancelled
and new programme information is
displayed.
End of programme
“Filter cleaning” and “Water tank” warning
symbols light up and “End” label appears
on the screen in the programme follow-
up indicator when the programme ends.
The door can be opened and the machine
becomes ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take
the laundry out after the programme
has come to an end.
C Clean the filter after each drying (please
see, Filter cleaning).
C Drain the water tank after each drying
(please see, Water tank)
Download from Www.Somanuals2.c2om. All Manuals Search And Download.
EN
7 Maintenance and cleaning
There are humidity sensors in your dryer
that detect whether the laundry is dry or
not.
Filter Cartridge / Door Inner
Surface
Lint and fibres released from the laundry to
the air during the drying cycle are collected
in the “Filter Cartridge”.
To clean the sensor:
1. Open the loading door of the dryer.
2. Allow the machine to cool down if
drying has been carried out.
3. Wipe the metal sensors with a soft
cloth, dampened with vinegar and dry
them.
C Clean metal sensors 4 times a year.
A Never use solvents, cleaning agents
or similar substances when cleaning
since these materials can cause fire and
explosion!
Water tank;
The moisture in the damp laundry is taken
from the laundry and condens ed. Drain
the water tank after each drying cycle or
during drying when “Water tank” warning
light turns on.
CSuch fibre and lint are generally formed
during wearing and washing.
C Always clean the filter and the inner
surfaces of the cover after each drying
process.
A Condensed water is not drinkable!
A Never take out the water tank when the
programme is running!
C You can clean the filter and filter area by
vacuum cleaner.
- Inside the drawer on the panel
- Behind the kick plate cover
If you forget to drain the water tank, your
dryer will stop during the following
drying cycles when the water tank is
full and the “Water tank” warning light
will turn on. If this is the case, press the
“Start/Pause/Cancel” button to resume
the drying cycle after draining the water
tank.
To clean the filter:
1. Open the loading door.
2. Remove the cover filter by pulling it up
and open the filter.
3. Clean lint, fibre, and cotton raveling by
hand or with a soft piece of cloth.
4. Close the filter and place it back into its
seat.
C Clogging may arise on the filter surface
after using your machine for some time;
if this occurs, wash the filter with water
and dry it before using again.
C Clean the entire inner surface of the
cover and door gasket.
To drain the water tank:
1. Drain the water as shown on the
picture .
Sensor
Download from Www.Somanuals.com.EANll Manuals Search And Download.
23
2. If there is lint accumulation in the water
tank cover, clean it and press to close.
3. Pull out the condenser.
3. Place the water tank into its seat.
For the condenser
4. Clean the condenser by applying
pressurized water with a shower head
and wait until the water drains.
Hot and humid air in the condenser is
cooled with the cold air from the room.
Thus, the humid air circulating in your
dryer is condensed and then pumped into
the tank.
C Clean the condenser after every 30
drying cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the machine and wait
until it cools down.
5. Place the condenser in its housing.
Fasten the 2 locks and make sure that
they are seated securely.
2. Unlock the 2 condenser locks after
opening the kick plate.
6. Close the kick plate cover.
Download from Www.Somanuals2.c4om. All Manuals Search And Download.
EN
8 Suggested solutions for problems
Drying process takes too much time
• Meshes of the filter may be clogged. Wash with water.
Laundry comes out wet at the end of drying.
• Meshes of the filter may be clogged. Wash with water.
• Excessive laundry might have been loaded in. Do not load the dryer in excess.
Dryer does not switch on or the programme does not start. Dryer is not activated
when set.
• It might have not been plugged in. Make sure that the machine is plugged in.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Programme might have not been set or the "Start/Pause/Cancel" button might
have not been pressed. Make sure that the programme has been set and it is not
in “Pause” mode.
• "Childproof lock" might have been activated. Deactivate the childproof lock.
Programme has been interrupted without any cause.
• The loading door may be ajar. Make sure that the loading door is properly closed.
• Electricity may be cut off. Press "Start/Pause/Cancel" button to start the
programme.
Laundry has shrunk, become pilled or deteriorated.
• A programme suitable for the laundry type might have not been used. Dry only
the laundry which is suitable for drying in dryer after checking the labels on your
clothes.
• Select a programme with suitable low temperature for the laundry type to dry your
clothes.
Drum lightning does not come on.
• Dryer might have not been started by using the "On/Off" button. Make sure that
the dryer is on.
• Bulb may have blown. Call the authorized service to replace the bulb.
“Final / Anti-creasing” symbol flashes.
• The 2-hour anti creasing programme to prevent laundry from creasing might have
been activated. Turn off the dryer and take out the laundry.
“Final / Anti-creasing” symbol is on.
• Programme has come to an end. Turn off the dryer and take out the laundry.
For products with a condenser:
“Water tank” warning symbol is on.
• Water may be full.
• Anti-creasing programme might be running. Drain the water in the tank.
“Filter cleaning” symbol is on.
• Filter might have not been cleaned. Clean the cover filter.
“Condenser cleaning” symbol is on.
• Filter drawer/Condenser might have not been cleaned. Clean the filters in the
condenser/filter drawer under the kick plate.
A Call an authorised service if the problem persists.
Download from Www.Somanuals.com.EANll Manuals Search And Download.
25
9 Guarantee
Your new Blomberg product is guaranteed
against the cost of breakdown repairs
for 3 years from the date of the original
purchase.
Cookers
• Gas Cookers must only be installed by
a Gas Safe (or BORD GAIS) registered
Gas Installer.
• The guarantee is given only within the
boundaries of the United Kingdom and
the Republic of Ireland.
• The guarantee is applicable only to new
products and is not transferable if the
product is resold.
What is covered?
• Repairs necessary as a result of faulty
materials, defective components or
manufacturing defect.
• The cost of functional replacement
parts, but excluding consumable items. • Blomberg disclaims any liability for
• The labour costs of a Blomberg
approved repairer to carry out the
repair.
incidental or consequential damages.
• The guarantee does not in anyway
diminish your statutory or legal rights.
What is not covered?
Should you experience any difficulty in
obtaining service please contact the
Blomberg Customer Help-Line.
Tel: 0845 604 6859
• Transit, delivery or accidental damage
or misuse and abuse.
• Cabinet or appearance parts, including
knobs, flaps, handles or container lids.
• Accessories or consumable items
including but not limited to, ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
• Repairs required as a result of
unauthorised repair or inexpert
installation that fails to meet the
requirements contained in the user
instruction book.
• Repairs to products used on
commercial or non-residential
household premises.
• Loss of frozen food in freezers or
fridge/freezers. (Food loss insurance is
often included within your household
contents insurance policy, or may be
available separately from your retailer).
Important notes.
• Your Blomberg product is designed and
built for domestic household use only.
• The guarantee will be void if the product
is installed or used in commercial or
non-residential domestic household
premises.
• The product must be correctly installed,
located and operated in accordance
with the instructions contained in the
User Instructions Booklet provided.
• Professional installation by a qualified
Electrical Domestic Appliance Installer
is recommended for all Washing
Machines, Dishwashers and Electric
Download from Www.Somanuals2.c6om. All Manuals Search And Download.
EN
10 Service
Please keep your purchase receipt or
other proof of purchase in a safe place;
you will need to have it should the product
require attention under guarantee.
You should also complete the details
below; it will help us assist you when
requesting service. (The model number
is printed on the Instruction Booklet and
the serial number is printed on the Rating
Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
Before requesting service please check the
trouble-shooting guide in the Operating
Instructions as a charge may be levied
where no fault is found even though your
product may still be under guarantee.
Service once the manufacturers guarantee
has expired.
If you have purchased an extended
guarantee please refer to the instructions
contained within the extended guarantee
agreement document. Otherwise please
call the appropriate number above where
service can be obtained at a charge.
Should you experience any difficulty in
obtaining service please contact the
Blomberg Customer Help-Line.
Tel: 0845 604 6859
Download from Www.Somanuals.com.EANll Manuals Search And Download.
27
Blomberg, 36-38 Caxton Way, Watford,
Hertfordshire, WD18 8UF
Tel: 0845 6048340
Fax: 0845 6004922,
email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|