Blaupunkt Portable Radio Miami CD72 User Manual

Radio / CD  
Miami CD72  
Orlando CD72  
Seattle CD72  
Montreal CD73  
Operating instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
3
2
1
6
5
12  
11  
10  
9
8
7
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
9
AUDIO button, to adjust the  
1
2
3
Button, to switch the unit on/off,  
adjust the volume  
bass, treble, balance, fader and  
loudness (short press) and oper-  
ate the volume mute feature  
(long press)  
Button, to unlock the remova-  
ble control panel (release panel)  
NEXT button to display the other  
pages in a menu and to switch  
to a different memory bank in ra-  
dio mode  
:
;
Display  
SOURCE button to start CD  
playback / CD-changer playback  
or Compact Drive MP3 (only if  
connected)  
4
Softkeys: the function of the  
softkeys depends on the current  
display content  
or  
To play an external audio source  
(only if connected)  
5
6
DEQ+ button, to open the equal-  
izer menu  
<
TUNER button, to activate radio  
mode and open the radio func-  
tions menu (only possible in ra-  
dio mode)  
button, to open the flip-re-  
lease control panel  
7
8
Joystick  
MENU button, to open the basic  
settings menu  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Listening to stored stations ............ 46  
Programme type (PTY) .................. 46  
Optimising radio reception............. 47  
Setting the radiotext display ........... 48  
Notes and accessories .......... 35  
Road and traffic safety ................... 35  
Safety information.......................... 35  
Installation ..................................... 35  
Accessories .................................. 35  
Traffic information.................. 48  
Removable control panel ....... 36  
Switching on/off .................... 37  
Adjusting the volume ............. 38  
CD mode ................................ 49  
Switching to CD mode and  
inserting a CD ............................... 49  
Removing a CD ............................. 50  
Selecting tracks ............................ 50  
Fast searching (audible) ................ 50  
Random track play (MIX) ............... 50  
Repeating tracks (REPEAT) ........... 50  
Displaying CD text......................... 51  
Setting scrolling text ...................... 51  
Traffic announcements in CD  
Sound and volume distribution  
settings .................................. 40  
Adjusting the bass ......................... 40  
Adjusting the treble ....................... 40  
X-BASS ........................................ 40  
Adjusting the right/left volume  
distribution (balance) ..................... 40  
Adjusting the front/back volume  
mode............................................. 51  
distribution (fader) ......................... 41  
CD changer mode (optional) . 52  
Switching to CD changer mode..... 52  
Selecting CDs............................... 52  
Selecting tracks ............................ 52  
Fast searching (audible) ................ 52  
Repeating individual tracks or  
whole CDs (REPEAT).................... 52  
Random track play (MIX) ............... 53  
Naming CDs ................................. 53  
Adjusting the display.............. 41  
Adjusting the viewing angle ........... 41  
Adjusting the display brightness..... 41  
Setting the button illumination  
colour............................................ 42  
Setting the level display ................. 42  
Radio mode............................ 43  
Configuring the tuner..................... 43  
Switching to radio mode ................ 43 CLOCK - Time ........................ 55  
Convenient RDS functions  
(AF, REG) ..................................... 43  
Selecting the waveband /  
memory bank................................. 44  
Tuning into a station....................... 45  
Setting the sensitivity of station  
seek tuning.................................... 45  
Storing stations ............................. 45  
Storing stations automatically  
Equalizer ................................ 56  
TMC for dynamic navigation  
systems .................................. 60  
Preamplifier............................ 60  
External audio sources .......... 61  
Specifications ........................ 61  
Installation instructions........ 268  
(Travelstore) .................................. 46  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
Road and traffic safety  
Notes and accessories  
Thank you for deciding to use a Blau-  
punkt product. We hope you enjoy us-  
ing this new piece of equipment.  
Road and traffic safety have ab-  
solute priority. Only operate your car  
radio if the road and traffic conditions  
allow you to do so. Familiarise your-  
self with the device before setting off  
on your journey.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
You should always be able to hear  
police, fire and ambulance sirens  
from afar. For this reason, set the  
volume of whatever you are listen-  
ing to at a reasonable level.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the equip-  
ment, please contact your dealer or the  
telephone hotline for your country. You  
will find the telephone numbers printed  
at the back of this booklet.  
Safety information  
The car radio and the device's  
control panel (flip-release panel) heat  
up during use. Therefore, when re-  
moving the flip-release panel, only  
hold it by its non-metallic surfaces.  
Allow the car radio to cool down first  
if you want to uninstall the whole unit.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
Installation  
If you want to install your car radio your-  
self, please read the installation and  
connection instructions that follow these  
operating instructions.  
D-31139 Hildesheim  
Accessories  
Only use accessories approved by Blau-  
punkt.  
Remote control  
The RC 08, RC 10 or RC 10H remote  
controls (available as optional accesso-  
ries) allow you to safely and conven-  
iently access the main functions of your  
car radio.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
THEFT PROTECTION  
Removable control panel  
Amplifier  
All Blaupunkt amplifiers can be used.  
Theft protection  
As a way of protecting your car radio  
Calibration microphone  
You can use the calibration microphone against theft, the unit is equipped with  
(available as an accessory) for the a removable control panel (flip-release  
equalizers automatic sound calibration panel). Without this control panel, the  
feature.  
car radio is worthless to a thief.  
Protect your equipment against theft by  
taking the control panel with you every  
time you leave your vehicle. Do not  
leave the control panel in your vehicle -  
not even in a hiding place.  
CD changer  
The following CD changers can be ob-  
tained from accessory retailers for con-  
nection with this device: CDCA02, CDC  
A 08, CDC A 072 und IDC A 09.  
You can also connect the CDC A 071  
CD-changer by using an adapter cable  
(Blaupunkt no.: 7 607 889 093).  
The control panel has been designed  
to be easy to use.  
Note:  
Never drop the control panel.  
Compact Drive MP3  
Never expose the control panel to  
direct sunlight or other heat sourc-  
es.  
As an alternative to a CD changer, you  
can connect a Compact Drive MP3 to  
access MP3 music tracks. If you con-  
nect a Compact Drive MP3, you will first  
need to use a computer to store the MP3  
music tracks on the Microdrive(tm) hard  
disk inside the Compact Drive MP3.  
Then, when the Compact Drive MP3 is  
connected to the car radio, you can play  
the tracks like normal CD music tracks.  
The Compact Drive MP3 is operated in  
the same way as a CD changer. Most  
of the CD changer functions can also  
be used with the Compact Drive MP3.  
Store the control panel in the sup-  
plied case.  
Avoid making direct skin contact  
with the control panels contacts. If  
necessary, clean the contacts with  
a lint-free cloth soaked in alcohol.  
Detaching the control panel  
2
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THEFT PROTECTION  
SWITCHING ON/OFF  
Press the  
button 2.  
Switching on/off  
The control panel latch mechanism  
opens.  
There are various ways of switching the  
unit on/off.  
First, pull the control panel straight  
off the unit and then out towards  
the left.  
Switching on/off using button  
1
To switch the unit on, press button  
1 until you feel the latch open and  
the button pushes out.  
The unit switches off after the con-  
trol panel is removed.  
All the current settings are saved.  
The unit switches on.  
Any CD already inserted in the unit  
To switch the unit off, press button  
1 until you feel it click into place.  
remains there.  
Attaching the control panel  
The unit switches off.  
Slide the control panel from left to  
right into the units guide.  
Switching on/off using the  
vehicle ignition  
If the device is correctly connected to  
the vehicles ignition and the unit was  
not switched off using button 1, it will  
switch on/off simultaneously with the  
ignition.  
Press the left-hand edge of the  
control panel into the unit until it  
clicks into place.  
You can switch the unit on even if the  
ignition is off.  
To do so, press button 1 so that  
you feel it unlatch and push out.  
Note:  
Note:  
To protect the vehicle battery, the unit  
will switch off automatically after one  
hour if the ignition is off.  
When attaching the control panel,  
make sure you do not press the  
display.  
If the device was still switched on when  
you removed the control panel, it will  
automatically switch on again with the  
last settings activated (i.e. radio, CD, CD  
changer/Compact Drive MP3 or AUX)  
when the panel is replaced.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
Adjusting the volume  
Activating mute  
This feature allows you to instantane-  
ously reduce the volume (mute).  
The volume can be adjusted in stages  
from 0 (off) to 50 (maximum).  
Press the AUDIO button 9 for  
To increase the volume, turn the  
volume control 1 to the right.  
longer than two seconds  
MUTEappears in the display.  
To decrease the volume, turn the  
volume control 1 to the left.  
Cancelling mute  
Setting the power-on volume  
You can set the units default power-on  
Briefly press the AUDIO button 9.  
or  
volume.  
turn the volume control 1.  
Press the MENU button 8.  
Telephone audio / navigation  
audio  
Press the softkey 4 assigned to  
the VOLdisplay item.  
If your car radio is connected to a mo-  
bile telephone or a navigation system,  
the units volume will be muted as soon  
as you pick upthe telephone or as  
soon as a navigation announcement is  
made. The caller or voice output will  
then be heard over the car radio loud-  
speakers. In order for this to work, the  
mobile telephone or navigation system  
must be connected to the car radio in  
the manner described in the installation  
instructions.  
Press the softkey 4 assigned to  
the ONdisplay item.  
Set the required volume using the  
volume control 1.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Note:  
To avoid damage to your hearing, the  
power-on volume is limited to a value  
of 40.  
You can find out from your Blaupunkt  
dealer which navigation systems can be  
used with your car radio.  
If a traffic information message is re-  
ceived during a telephone call or whilst  
a navigation announcement is being  
made, the traffic message will only be  
played after the call or voice output is  
finished.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
If, during a traffic announcement, a tel-  
ephone call arrives or the navigation  
system wants to output a spoken in-  
struction, the traffic announcement is  
interrupted and the telephone call/voice  
output can be heard.  
Automatic sound  
This feature automatically adjusts the  
volume of the car radio to suit the speed  
at which the vehicle is travelling. In or-  
der for this to work, your car radio must  
be connected in the manner described  
in the installation instructions.  
You can set the volume level at which  
telephone calls and the navigation voice  
output will first be heard.  
The automatic volume boost can be set  
to six levels (0-5). 0means no boost  
and 5means maximum boost.  
Press the MENU button 8.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the VOLdisplay item.  
Press the softkey 4 assigned to  
the VOLdisplay item.  
Press the softkey 4 that is as-  
signed to the TELdisplay item for  
the telephone volume or NAVI”  
display item for the voice output.  
Press the softkey 4 assigned to  
the AUTOdisplay item.  
Set the boost level using the joy-  
stick 7.  
Set the required volume using the  
volume control 1.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
The settings are saved.  
Note:  
Note:  
The optimum setting for the speed-re-  
lated sound adjustment feature de-  
pends on how noise levels develop in  
your particular vehicle. You will need to  
test various settings in order to find out  
which is best suited to your vehicle.  
You can also adjust the volume during  
the telephone call using the volume con-  
trol 1.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND AND VOLUME DISTRIBUTION SETTINGS  
X-BASS  
Sound and volume  
distribution settings  
The X-BASS feature can be used to  
aurally compensate the bass at low vol-  
ume levels. The X-BASS boost can be  
set in steps ranging from 0 (off) to 6  
(max). If X-BASS is activated, the con-  
figured X-BASS boost level will be dis-  
play alongside the X-BASS symbol in  
the display.  
Note:  
You can adjust the bass, treble and X-  
BASS individually for each audio  
source.  
Adjusting the bass  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
Press the softkey 4 assigned to  
the BASSdisplay item.  
Press the softkey 4 assigned to  
the X-BASSdisplay item.  
Move the joystick 7 up or right to  
boost the bass or move it down or  
left to reduce the bass.  
Move the joystick 7 up or right to  
boost the X-BASS or move it down  
or left to reduce the X-BASS.  
When you have finished making your  
changes,  
When you have finished making your  
changes,  
press the joystick OK 7 or the  
AUDIO button 9.  
press the joystick OK 7 or the  
AUDIO button 9.  
Adjusting the treble  
Adjusting the right/left volume  
distribution (balance)  
Press the AUDIO button 9.  
AUDIO 1appears in the display.  
To adjust the balance, press the  
AUDIO button 9.  
Press the softkey 4 assigned to  
the TREBdisplay item.  
AUDIO 1appears in the display.  
Move the joystick 7 up or right to  
boost the treble or move it down or  
left to reduce the treble.  
Press the softkey 4 assigned to  
the BALdisplay item.  
Move the joystick 7 up/right or  
down/left to adjust the right/left vol-  
ume distribution.  
When you have finished making your  
changes,  
press the joystick OK 7 or the  
AUDIO button 9.  
When you have finished making your  
changes,  
press the joystick OK 7 or the  
AUDIO button 9.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOLUME DISTRIBUTION ADJUSTING THE DISPLAY  
Adjusting the front/back volume  
distribution (fader)  
Adjusting the display  
You can adjust the display to suit the  
installation position in your vehicle and  
your own preferences.  
To adjust the fader, press the AU-  
DIO button 9.  
AUDIO 1appears in the display.  
Adjusting the viewing angle  
Press the softkey 4 assigned to  
the FADEdisplay item.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Move the joystick 7 up/right or  
down/left to adjust the front/back  
volume distribution.  
Press the softkey 4 assigned to  
the ANGLdisplay item.  
When you have finished making your  
changes,  
Move the joystick 7 up/right or  
down/left to adjust the viewing an-  
gle.  
press the joystick OK 7 or the  
AUDIO button 9.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Adjusting the display brightness  
If your car radio has been connected  
as described in the installation instruc-  
tions, the display brightness will switch  
over when the headlights are turned on/  
off. The display brightness can be ad-  
justed separately for night and day in  
steps ranging from 1-6. We recommend  
setting 6.  
Daytime display brightness  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Press the softkey 4 assigned to  
the DAYdisplay item.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE DISPLAY  
Move the joystick 7 up/right or  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
down/left to adjust the brightness.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
Setting the level display  
The settings are saved.  
The level display briefly provides a sym-  
bolic display of the volume, the sound  
control settings and the equalizer set-  
tings whilst you are making your chang-  
es.  
Night-time display brightness  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
When you are not changing any set-  
tings, the level display can display the  
car radios output level. You can also  
switch off the level display and have the  
current volume level displayed continu-  
ously.  
Press the softkey 4 assigned to  
the NGHTdisplay item.  
Move the joystick 7 up/right or  
down/left to adjust the brightness.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Switching the level display on/off  
Press the MENU button 8.  
The settings are saved.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Setting the button illumination  
colour  
The colour of the devices button illumi-  
nation can be adjusted (only the softkey  
colours can be changed on the Miami  
CD72). Choose between COLOR 1or  
COLOR 2.  
Keep pressing the softkey 4 as-  
signed to the EQdisplay item un-  
til the required setting EQ DISP  
OFFor EQ DISP ONappears.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Press the MENU button 8.  
The settings are saved.  
Press the softkey 4 assigned to  
the DISPdisplay item.  
Keep pressing the softkey 4 as-  
signed to the KEYSdisplay item  
until the required colour (COLOR  
1or COLOR 2) appears in the  
display.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Switching to radio mode  
Radio mode  
If the device is in CD mode, cassette  
mode, Multi-Media Card (MMC) mode  
(depending on the car radios equip-  
ment) or CD changer/Compact Drive  
MP3 mode,  
This unit is equipped with an RDS radio  
receiver. Many of the receivable FM sta-  
tions transmit a signal that not only car-  
ries the programme but also additional  
information such as the station name  
and programme type (PTY).  
press the TUNER button <.  
The station name appears in the dis-  
play as soon as it is received. You can  
optionally display the programme type.  
For further details, please read the sec-  
tion entitled Programme type (PTY).  
The main radio menu for tuning into a  
station is displayed. The radio mode  
functions are controlled in the radio func-  
tions menu. You can open the radio  
functions menu by pressing the TUN-  
ER button < again. If you are in any  
other mode, you can open the radio  
functions menu by pressing the MENU  
button 8 followed by the softkey 4  
that is assigned to the TUNEdisplay  
item.  
Configuring the tuner  
To ensure that the tuner works proper-  
ly, the device must be configured for  
your region. You can choose between  
Europe and the USA. By default, the  
tuner is set to the region in which the  
device was sold. If you experience prob- Convenient RDS functions  
lems with radio reception, please check  
these settings.  
(AF, REG)  
The convenient RDS functions AF (Al-  
Press the MENU button 8.  
ternative Frequency) and REG (Region-  
al) extend your radios range of func-  
tions (only in FM radio mode).  
Press the softkey 4 assigned to  
the SETPdisplay item.  
AF: If this RDS function is activat-  
ed, the unit automatically tunes into  
the best receivable frequency for  
the station that is currently set.  
Press the softkey 4 assigned to  
the AREAdisplay item.  
Press the softkey 4 assigned to  
the display item of the region that  
you require: EUROor USA.  
REG: At certain times, some radio  
stations divide their programme  
into regional programmes providing  
different content. You can use the  
REG function to prevent the car ra-  
dio from switching to alternative  
frequencies that are providing dif-  
ferent regional programme content.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
The settings are saved.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Note:  
Selecting the waveband /  
memory bank  
REG must be separately activated/de-  
activated in the radio functions menu.  
This unit can receive programmes  
broadcast over the FM and MW/LW  
(AM) frequency ranges. There are four  
memory banks for the FM range and  
one for each of the MW and LW rang-  
es.  
Switching the RDS function on/off  
To use the RDS functions (AF and  
REG),  
press the TUNER button < in ra-  
dio mode.  
Six stations can be stored in each mem-  
ory bank.  
The radio functions menu appears in the  
display.  
Selecting the waveband  
Press the softkey 4 assigned to  
the RDSdisplay item.  
To select the FM, MW or LW waveband,  
press the TUNER button < in ra-  
RDS ONor RDS OFFappears briefly  
in the display.  
dio mode.  
The radio functions menu appears in the  
display.  
To return to the main radio menu,  
press the TUNER button < or the  
joystick OK 7.  
Press the softkey 4 assigned to  
the BANDdisplay item.  
The settings are saved.  
Press the softkey 4 assigned to  
the FMdisplay item for the FM  
waveband.  
Switching REG on/off  
To use the REG RDS function,  
press the TUNER button < in ra-  
Press the softkey 4 assigned to  
the MWdisplay item for the MW  
waveband.  
dio mode.  
The radio functions menu appears in the  
display.  
Press the softkey 4 assigned to  
the LWdisplay item for the LW  
waveband.  
Press the softkey 4 assigned to  
the REGdisplay item.  
The main radio menu for the selected  
waveband appears.  
REG ONor REG OFFappears brief-  
ly in the display.  
Press the TUNER button < or the  
joystick OK 7.  
Selecting the FM memory bank  
To switch between the FM memory  
banks FM1, FM2, FM3 and FMT,  
The settings are saved.  
keep pressing the NEXT button 3  
until the required memory bank ap-  
pears in the display.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
The memory banks are accessed in the  
following order: FM1, FM2, FM3 and  
FMT.  
Setting the sensitivity of station  
seek tuning  
You can choose whether to only tune  
into stations with a strong reception or  
to also tune into those with a weak re-  
ception.  
Tuning into a station  
There are various ways of tuning into a  
station.  
press the TUNER button < in ra-  
Automatic seek tuning  
dio mode.  
Move the joystick 7 down or up.  
The radio functions menu appears in the  
The unit tunes into the next receivable display.  
station.  
Press the NEXT button 3.  
Tuning into stations manually  
Press the softkey 4 assigned to  
the SENSdisplay item.  
You can also tune into stations manual-  
ly.  
The display shows the currently set sen-  
sitivity level. SENS 6is the highest  
sensitivity setting and means the tuner  
can receive distant stations. SENS 1”  
is the lowest setting.  
Move the joystick 7 left or right.  
Note:  
You can only tune into stations manual-  
ly if the RDS function is deactivated.  
Move the joystick 7 up/right or  
Browsing through broadcasting  
networks (only FM)  
down/left to adjust the sensitivity.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
If a radio station provides several pro-  
grammes, you have the option of brows-  
ing through its broadcasting network.  
The settings are saved.  
Move the joystick 7 left or right.  
Storing stations  
Note:  
Storing stations manually  
The RDS function must be activated  
before you can use this feature.  
Select the required FM memory  
bank, i.e. FM1, FM2, FM3, FMT, or  
one of the MW or LW wavebands.  
When using this feature, you will only  
be able to switch to stations that you  
have received once already.  
Tune into the required station as  
described in the section entitled  
Tuning into a station.  
Press one of the six softkeys for  
longer than two seconds to store  
the station to that softkey.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Programme type (PTY)  
Storing stations automatically  
(Travelstore)  
You can automatically store the six sta-  
tions with the strongest reception in the  
region (only FM). The stations are stored  
in the FMT memory bank.  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting. Your radio can receive  
and display this information.  
For example, the programme types can  
be:  
Note:  
Any stations that were previously stored  
in this memory bank are deleted in the  
process.  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
CLASSICS  
Starting the Travelstore function  
Using the PTY function, you can direct-  
ly select stations of a particular pro-  
gramme type.  
Press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
PTY-EON  
If you specify the programme type and  
start seek tuning, the unit will switch from  
the current station to a station of the  
selected programme type.  
Press the softkey 4 assigned to  
the TSdisplay item.  
The station storing procedure begins.  
T-STOREappears in the display. Af-  
ter the process is completed, the sta-  
tion stored in FMT memory location 1  
will be played.  
Note:  
If no station is found that corre-  
sponds to the selected programme  
type, you will hear a beep sound  
and NO PTYappears briefly in  
the display. The radio will then re-  
tune to the station that was re-  
ceived last.  
Listening to stored stations  
Select the memory bank or wave-  
band.  
Press the softkey 4 that is as-  
signed to the name or frequency of  
the station that you want to listen  
to.  
If the tuned radio station or another  
station on the broadcasting net-  
work broadcasts the required pro-  
gramme type at a later point in  
time, the radio automatically  
switches from the currently tuned  
station or from CD mode / CD  
changer mode to the station whose  
programme type matches the one  
you selected.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
If no station is found that corresponds  
to the selected programme type, you will  
hear a beep sound and NO PTYap-  
pears briefly in the display. The radio  
will then retune to the station that was  
received last.  
Activating PTY  
To use the PTY function,  
press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
Note:  
Press the softkey 4 assigned to  
the PTYdisplay item.  
If you want to switch back to the pro-  
gramme types display,  
If PTY is activated, the display shows  
the current programme type. PTY ap-  
pears in the display. The programme  
types are displayed alongside the  
softkeys 4.  
briefly move the joystick 7 in any  
direction.  
Optimising radio reception  
Treble reduction feature during  
interference (HiCut)  
Cancelling PTY  
To cancel the PTY function,  
The HiCut function improves the sound  
during poor radio reception. If interfer-  
ence occurs, the treble is automatically  
reduced thus reducing the interference  
level.  
Whilst the programme types are  
being displayed, press the softkey  
4 assigned to the OFFdisplay  
item.  
Selecting a programme type and  
starting seek tuning  
Setting HiCut  
Press the TUNER button < in ra-  
The PTY menu is made up of several  
pages on which the known programme  
types are displayed. To browse through  
the PTY menus pages,  
dio mode.  
The first page of the radio functions  
menu is displayed.  
Press the NEXT button 3.  
keep pressing the NEXT button 3  
until the required programme type  
appears alongside one of the  
softkeys.  
Press the softkey 4 assigned to  
the HCUTdisplay item.  
Move the joystick 7 up/right or  
Press the softkey 4 assigned to  
down/left to set the HiCut.  
the required programme type.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Move the joystick 7 up/right or  
down/left to start seek tuning.  
The next receivable station correspond-  
ing to your selected programme type will  
then be tuned into.  
The settings are saved.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
TRAFFIC INFORMATION  
Traffic information  
Setting the radiotext display  
Some stations use the RDS signal to  
broadcast scrolling texts known as ra-  
diotexts. You can activate or deactivate  
the radiotext display.  
Your unit is equipped with an RDS-EON  
receiver. EON (Enhanced Other Net-  
work) is a feature that involves the  
broadcasting of radio station informa-  
tion within a broadcasting network.  
Every time a traffic announcement (TA)  
is transmitted, you will automatically be  
switched from a station that does not  
provide traffic information to a station  
within the broadcasting network that  
does.  
Press the TUNER button < in ra-  
dio mode.  
The radio functions menu appears in the  
display.  
Press the NEXT button 3.  
The second pageof the radio functions  
menu is displayed.  
Once the traffic announcement has  
been heard, you will be switched back  
to the programme that you were listen-  
ing to before.  
Press the softkey 4 assigned to  
the RTXTdisplay item.  
RTXT ONor RTXT OFFappears  
briefly in the display.  
Switching traffic information  
priority on/off  
Press the TUNER button < or the  
joystick OK 7.  
Press the TUNER button < in ra-  
dio mode.  
The settings are saved.  
The radio functions menu appears in the  
display.  
Press the softkey 4 assigned to  
the TRAFdisplay item.  
Traffic announcement priority is active  
when a traffic jam symbol is displayed.  
Note:  
The TAmenu is displayed during a traf-  
fic announcement.  
To interrupt the current traffic announce-  
ment,  
press the softkey 4 assigned to  
the OFFdisplay item.  
If you want to deactivate priority for traf-  
fic announcements,  
press the softkey 4 assigned to  
the TRAFdisplay item.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRAFFIC INFORMATION  
CD MODE  
Note:  
CD mode  
You can use this unit to play standard  
CDs with a diameter of 12 cm.  
You will hear a warning sound:  
if you leave the reception area of a  
traffic information station that you  
are currently listening to.  
CD-Rs (CDs that you have burned”  
yourself) and CD-RWs can generally  
also be played. Due to the varying qual-  
ity of CDs, Blaupunkt cannot guaran-  
tee that this will work properly.  
if, while listening to a CD, cassette  
or Multi-Media Card (depending on  
the car radios equipment), you  
leave the reception area of a traffic  
information station that you are  
tuned into and the subsequent au-  
tomatic search cannot find a new  
traffic information station.  
if you retune the radio from a traffic  
information station to a station that  
does not broadcast traffic informa-  
tion.  
To ensure the system functions proper-  
ly, only use CDs labelled with the com-  
pact disc logo. Problems might be ex-  
perienced when trying to play copy-pro-  
tected CDs. Blaupunkt cannot guaran-  
tee the proper functioning of copy-pro-  
tected CDs!  
Risk of severe damage to the  
CD drive!  
If you hear the warning sound, you can  
either switch off traffic information pri-  
ority or tune into a station that broad-  
casts traffic information.  
CD singles with a diameter of 8 cm  
and non-circular contoured CDs  
(shape CDs) must not be used.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
Setting the volume for traffic  
announcements  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the VOLdisplay item.  
Switching to CD mode and  
inserting a CD  
If there is no CD inserted in the unit  
Press the softkey 4 assigned to  
the TRAFdisplay item.  
yet,  
Set the required volume using the  
volume control 1.  
press the  
The control panel opens out towards  
you.  
button 6.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Insert the CD with the printed side  
uppermost into the CD compart-  
ment.  
The CD is drawn into the drive.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
You must not hinder or assist the drive  
as it draws in the CD.  
Fast searching (audible)  
To fast search backwards or forwards,  
The control panel closes automatically.  
Press and hold the joystick 7 in  
one direction (up and right for the  
next track or down and left for the  
previous track) until fast searching  
backwards/forwards begins.  
The CD menu appears and CD play-  
back begins.  
If a CD is already inserted in the  
unit,  
keep pressing the SOURCE button  
; until CD mode is displayed.  
Random track play (MIX)  
Press the softkey 4 assigned to  
the MIXdisplay item.  
The CD menu appears and playback  
begins from the point at which it was  
last interrupted.  
MIX ONappears briefly in the display.  
The next track to be played will be  
picked at random.  
Removing a CD  
press the  
button 6.  
Cancelling MIX  
The control panel opens out towards  
you and the CD is ejected.  
Press the softkey 4 assigned to  
the MIXdisplay item again.  
Carefully remove the CD.  
MIX OFFappears briefly in the dis-  
play.  
Press the  
button 6.  
The control panel closes.  
Repeating tracks (REPEAT)  
Press the softkey 4 assigned to  
the RPTdisplay item.  
Selecting tracks  
Move the joystick 7 in one direc-  
tion (up and right for the next track  
or down and left for the previous  
track) until the number of the re-  
quired track appears in the display.  
REPEATONappears briefly in the dis-  
play. The track is repeated until you  
deactivate RPT.  
Cancelling REPEAT  
If you press the joystick 7 downwards  
once or to the left once, the current track  
will be played again from the beginning.  
Press the softkey 4 assigned to  
the RPTdisplay item again.  
REPEAT OFFappears briefly in the  
display. Normal playback is then re-  
sumed.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Displaying CD text  
Traffic announcements in CD  
mode  
Some CDs include CD text. The CD text  
may contain the names of the artist, the  
album and track.  
If you want to receive traffic an-  
nouncements whilst in CD mode,  
activate traffic information recep-  
tion in the radio functions menu.  
You can allow the CD text to be dis-  
played as scrolling text every time you  
switch to another track. After the whole  
CD text has been shown once, the  
name of the track is displayed. If the  
inserted CD does not contain any CD  
text, NO TEXTwill briefly appear in  
the display if the CD text feature is acti-  
vated.  
Traffic announcement priority is active  
when a traffic jam symbol is displayed.  
For further details, please read the chap-  
ter entitled Traffic information recep-  
tion.  
Activating CD text  
Press the softkey 4 assigned to  
the TAGdisplay item.  
Deactivating CD text  
Press the softkey 4 assigned to  
the TAGdisplay item again.  
Setting scrolling text  
You can display the contents of the main  
display area as scrolling text.  
Activating CD scrolling text  
Press the softkey 4 assigned to  
the SCRLdisplay item.  
SCROLL ONappears briefly in the  
display.  
Deactivating CD scrolling text  
Press the softkey 4 assigned to  
the SCRLdisplay item again.  
SCROLL OFFappears briefly in the  
display.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
or  
CD changer mode  
(optional)  
keep pressing the joystick 7 up or  
down until the number of the re-  
quired CD appears in the display.  
To find out which CD changers / Com-  
pact Drive can be used with this unit,  
please refer to the "Accessories" chap-  
ter in these instructions or contact your  
Blaupunkt dealer.  
Selecting tracks  
To move down or up to another track  
on the current CD,  
Note:  
repeatedly press the joystick 7 to  
the left or right until the number of  
the required track appears in the  
display.  
Information on handling CDs, inserting  
CDs and operating the CD changer can  
be found in the operating instructions  
supplied with your CD changer.  
If you press the joystick 7 once to the  
left, the current track will be played again  
from the beginning.  
Information on using the Compact Drive  
MP3 and recording music tracks onto it  
can be found in the operating instruc-  
tions supplied with the Compact Drive  
MP3.  
Fast searching (audible)  
To fast search backwards or forwards,  
Switching to CD changer mode  
press and hold the joystick 7 to  
the left or right until fast searching  
backwards / forwards begins.  
Keep pressing the SOURCE but-  
ton ; until CD changer mode is  
displayed.  
Repeating individual tracks or  
whole CDs (REPEAT)  
Playback continues from the point at  
which it was last interrupted. If the mag-  
azine was removed from the CD chang-  
er and then replaced, the CD magazine  
will first be scanned, and playback will  
begin from the first track on the first CD  
that the CD changer detects.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
The CD changer functions menu opens.  
Press the softkey 4 assigned to  
the RPTdisplay item.  
Selecting CDs  
To move up or down to another CD,  
RPT TRCKappears briefly in the dis-  
play.  
press the softkey 4 assigned to  
the display item of the CD (CD1 –  
CD10) that you require. To do so,  
you might need to switch to the  
second pageof the main CD-  
changer menu using the NEXT  
button 3.  
To repeat the whole CD,  
press the softkey 4 assigned to  
the RPTdisplay item again.  
RPT CDappears briefly in the display.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Cancelling REPEAT  
Cancelling MIX  
To stop the current track or current CD To cancel MIX,  
from being repeated,  
keep pressing the softkey 4 that  
keep pressing the softkey 4 that  
is assigned to the RPTdisplay  
item until RPT OFFappears brief-  
ly in the display.  
is assigned to the MIXdisplay  
item until MIX OFFappears brief-  
ly in the display.  
Naming CDs  
The car radio allows you to assign  
Random track play (MIX)  
To play the tracks on the current CD in names for up to 99 CDs (not with the  
random order,  
Compact Drive MP3) so that you can  
recognise them more easily. The names  
can be a maximum of eight characters  
long.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
If you try assigning more than 99 names,  
FULLwill appear in the display.  
The CD changer functions menu opens.  
Press the softkey 4 assigned to  
the MIXdisplay item.  
Entering / editing CD names  
Listen to the CD that you want to  
MIX CDappears in the display.  
name.  
To play the all the tracks on all inserted  
CDs in random order,  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
press the softkey 4 assigned to  
the MIXdisplay item again.  
The CD changer functions menu opens.  
MIX ALLappears in the display.  
Press the softkey 4 assigned to  
the NAMEdisplay item.  
Note:  
In the case of the CDC A 08 and the  
IDC A 09, all the CDs and all the tracks  
in the changer are picked randomly. In  
the case of any other changer, all the  
tracks on one CD are played randomly  
first before the next CD in the changer  
is played.  
You will now enter edit mode. If your  
chosen CD does not have a name yet,  
eight underscores will appear in the dis-  
play. The current input position flashes.  
Move the joystick 7 up or down to  
select the character you want. If  
you want an empty space, simply  
select the underscore.  
Move the joystick 7 to the left or  
right to change the input position.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
CDC CLEARappears in the display.  
The process can take up to 45 seconds  
depending on how many CD names  
have been stored.  
To save a name, press the softkey  
4 assigned to the NAMEdisplay  
item.  
Deleting a CD name  
Note:  
Listen to the CD whose name you  
This function is not available for the  
Compact Drive MP3. If you use this  
function with the Compact Drive MP3,  
CDC CLEARis displayed for 45 sec-  
onds. You will not be able operate the  
unit whilst this is happening.  
want to delete.  
Press the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
Press the softkey 4 assigned to  
the NAMEdisplay item.  
You will now enter edit mode. The name  
of the CD appears in the display and  
the current input position flashes.  
Move the joystick 7 up or down to  
select the underscore character.  
Move the joystick 7 to the left or  
right to change the input position.  
Insert an underscore at every input  
position.  
Press the softkey 4 assigned to  
the NAMEdisplay item.  
The CD name will be deleted.  
Deleting all CD names  
You can delete all the CD names stored  
in the unit.  
To delete all the CD names, press  
the MENU button 8.  
Press the softkey 4 assigned to  
the CDCdisplay item.  
Press the softkey 4 assigned to  
the CLRdisplay item.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK - TIME  
To adjust the minutes,  
CLOCK - Time  
press the softkey 4 assigned to  
the MINdisplay item.  
Setting the clock  
The clock can be set automatically us-  
ing the RDS signal. You can also set  
the clock manually if you cannot receive  
a radio station that supports this feature.  
The minutes flash.  
Adjust the minutes using the joy-  
stick 7.  
Press the joystick OK 7 or the  
MENU button 8 to close the  
menu.  
Setting the clock automatically  
To set the clock automatically,  
press the MENU button 8.  
The settings are saved.  
Press the softkey 4 assigned to  
the VARIdisplay item.  
Keep pressing the softkey 4 as-  
signed to the CSYNdisplay item  
until RDS SYN ONappears brief-  
ly.  
RDS SYN ONmeans that the clock is  
set automatically using the RDS signal.  
Setting the clock manually  
To set the time, press the MENU  
button 8.  
Press the softkey 4 assigned to  
the VARIdisplay item.  
Press the softkey 4 assigned to  
the CSETdisplay item.  
The CLOCK SETmenu appears.  
Press the softkey 4 assigned to  
the HOURdisplay item.  
The hours flash on and off.  
Adjust the hours using the joystick  
7.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Equalizer  
This unit is equipped with a digital sound  
calibration feature (DSA Digital Sound  
Adjustment). It provides you with three  
self-calibrating 5-band equalizers and  
five sound presets.  
Switching the equalizer on/off  
To switch the equalizer on/off,  
press the DEQ+ button 5.  
The equalizer menu is displayed.  
To activate the equalizer,  
The EQ1 - EQ3 equalizers can be cali-  
brated automatically with the help of a  
special calibration microphone. You can  
obtain this microphone from your Blau-  
punkt dealer. The automatically ascer-  
tained values can also be adjusted  
manually.  
Press the softkey 4 assigned to  
the USERor PREdisplay item  
and select an equalizer.  
To deactivate the equalizer,  
Press the softkey 4 assigned to  
the OFFdisplay item.  
Furthermore, you can also set the equal-  
izer manually.  
Automatically calibrating the  
equalizer  
The following bands are available:  
You can electronically calibrate and  
store values for three different situations.  
SUB LOW EQ 32 - 50 Hz  
LOW EQ  
MID EQ  
63 - 250 Hz  
EQ 1 for the driver only  
EQ 2 for the driver and front  
passenger  
315 - 1,250 Hz  
MID/HIGH EQ 1,600 - 6,300 Hz  
EQ 3 for the front and rear occupants  
HIGH EQ  
8,000 - 12,500 Hz  
Hold the calibration microphone (avail-  
able as an accessory) in the appropri-  
ate position whilst the calibration is tak-  
ing place.  
The position of the calibration micro-  
phone for situation 1 (e.g. for the driver  
alone) is at the height of the driver's  
head.  
For situation 2, the calibration micro-  
phone is between the driver and pas-  
senger.  
For Situation 3, it is in the middle of the  
vehicle interior (left/right, front/back).  
Really quiet surroundings are required  
for the calibration.Any extraneous noise  
will distort the measured values.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Note:  
Selecting sound presets  
You can select sound presets for the  
following music types.  
The sound radiating from the loud-  
speakers must not be obstructed by any  
objects. All the loudspeakers must be  
connected. The microphone must be  
connected to the unit.  
VOCAL (VOCL)  
DISCO (DISC)  
ROCK  
To calibrate an equalizer,  
TECHNO (TECH)  
CLASSIC (CLAS)  
Press the DEQ+ button 5.  
Press the softkey 4 assigned to  
the USERdisplay item.  
The settings for these music styles have  
already been programmed.  
Press the softkey 4 assigned to  
the display item of the equalizer  
that you want to configure.  
Press the DEQ+ button 5.  
Press the softkey 4 assigned to  
the PREdisplay item.  
Press the softkey 4 assigned to  
the AUTOdisplay item.  
Select one of the presets using the  
corresponding softkeys 4.  
You will hear a test sound, and calibra-  
tion takes place.  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
Proceed as described for all the  
equalizers.  
The settings are saved.  
Selecting an equalizer  
After calibration has taken place or you  
have finished making manual adjust-  
ments,  
press the DEQ+ button 5.  
Press the softkey 4 assigned to  
the USERdisplay item.  
Select one of the equalizers EQ1,  
EQ2or EQ3using the corre-  
sponding softkeys 4.  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
The settings are saved.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Making adjustments  
Manually adjusting the equalizer  
Notes on adjusting the settings  
Press the DEQ+ button 5.  
Press the softkey 4 assigned to  
the USERdisplay item.  
We recommend you use a CD or cas-  
sette (depending on the car radios  
equipment) that you are familiar with for  
making changes to the settings.  
Press the softkey 4 assigned to  
the display item of the equalizer  
that you want to configure.  
Before adjusting the equalizer, set the  
sound and volume distribution settings  
to zero and deactivate X-BASS. For fur-  
ther details, refer to the chapter entitled  
Sound and volume distribution set-  
tings.  
Press the softkey 4 assigned to  
the display item of the equalizer  
band that you want to configure.  
To select the frequency,  
press the joystick 7 to the left or  
Listen to a CD or cassette (de-  
pending on the car radios equip-  
ment).  
right.  
Adjust the level for the frequency  
by pressing the joystick 7 up or  
down.  
What impression does the sound  
give you?  
Press the joystick OK 7 or the  
DEQ+ button 5 to close the  
menu.  
Now read the Sound impression”  
column in the table entitled Help  
adjusting the equalizer.  
The settings are saved.  
Set the equalizer values as de-  
scribed in the Measurescolumn.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EQUALIZER  
Help adjusting the equalizer  
Sound Impression / problem  
Measures  
Bass sound is too weak  
Increase bass with  
Frequency: 32 to 160 Hz  
Level: +4 to +6 dB  
Dirty bass  
Booming sound  
Unpleasant pressure  
Reduce the lower mid level with  
Frequency: 400 Hz  
Level: approx. -4 dB  
Sound very much in the foreground,  
aggressive, no stereo effect.  
Reduce the mid level with  
Frequency: 1,000 to 2,500 Hz  
Level: -4 to -6 dB  
Dull sound  
Little clarity  
No brilliance to the instruments  
Increase treble level with  
Frequency: 6,300 to 10,000 Hz  
Level: +2 to +4 dB  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREAMPLIFIER  
TMC  
TMC for dynamic navigation Preamplifier  
systems  
The car radio provides connections for  
connecting an external preamplifier and  
a subwoofer.  
TMC stands for Traffic Message Chan-  
nel.Traffic information announcements  
are broadcast digitally usingTMC, which  
means they can be used by compatible  
navigation systems during route plan-  
ning. Your car radio has a TMC output  
which you can use for connecting Blau-  
punkt navigation systems. You can find  
out from your Blaupunkt dealer which  
navigation systems can be used with  
your car radio.  
We recommend you use well-matched  
products from the Blaupunkt or Veloci-  
ty product ranges.  
If a navigation system is connected and  
a TMC station is being received, TMC  
lights up in the display.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL AUDIO SOURCES  
External audio sources  
SPECIFICATIONS  
Specifications  
In addition to the CD changer, you can  
also connect another external audio  
source equipped with a line output. The  
audio source can, for example, be a  
portable CD player, MiniDisc player or  
MP3 player.  
Amplifier  
Output power:  
4 x 26 watts sine  
in accordance  
with DIN 45 324  
at 14.4 V  
4 x 50 watts max.  
power  
The AUX input must be activated in the  
setup menu.  
If you want to connect an external au-  
dio source, you will need an adapter  
cable. You can obtain this cable from a  
Blaupunkt dealer.  
Tuner  
Wavebands:  
FM  
MW :  
LW  
:
87.5 108 MHz  
531 1,602 kHz  
153 279 kHz  
Switching the AUX input on/off  
:
Press the MENU button 8.  
FM frequency response:  
30 - 16,000 Hz  
Press the softkey 4 assigned to  
the SETPdisplay item.  
Press the softkey 4 assigned to  
the AUX1or AUX2display item  
for the input that you want to switch  
on/off.  
CD  
Frequency response:  
15 - 20,000 Hz  
The AUX menu is displayed.  
Pre-amp out  
4 channels:  
Note:  
4 V / 10 k  
If a CD changer is connected, you can-  
not change the AUX1input.  
AUX input  
Input sensitivity:  
Press the softkey 4 assigned to  
the ONor OFFdisplay item to  
switch the input on/off.  
1.2 V / 10 kΩ  
Note:  
If theAUX input is switched on it can be  
selected by pressing the SOURCE but-  
ton ;.  
Subject to changes!  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Número de  
serviço / Servicenumre  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
01-576 9473  
01-4598830  
02-369 6464  
40 2085  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0800-550 6550  
(IRL) 01-4149400  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherland  
Norway  
Portugal  
Spain  
(NL)  
023-565 6348  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
(N)  
(P)  
(E)  
(S)  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ)  
02-6130 0441  
01-333 9575  
0800-118922  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
Poland  
(PL)  
Turkey  
USA  
(TR)  
0212-3350677  
0212-3460040  
708-6817188  
(USA) 800-2662528  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
02/02 TRO  
CM/PSS 8 622 403 256  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blanco Indoor Furnishings 516195 User Manual
Bowers Wilkins Speaker 802 FS User Manual
Bush Hog Brush Cutter 2610L User Manual
Bush Hog Compact Loader 2427 User Manual
Cable Electronics Switch HSW44C User Manual
Cannon Time Clock PIXMA MX340 User Manual
Carcomm Cell Phone Accessories CMPC 15 HTC Himalaya Alpine Qtek 2020 2020i User Manual
Carson Optical Binoculars BA 07 User Manual
Casio Digital Camera YC 400 User Manual
Celestron Binoculars 72121 User Manual