Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
WARNING! To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Dangerous high voltages are present inside the enclosure. To prevent electrical shock, do not
open the cabinet.
The lightning flash with arrowhead symbol within and equilateral triangle is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within and equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION This unit employs a laser system. To ensure the proper use of the unit, read this manual carefully and keep it for
future reference. If the unit requires servicing, contact the retailer and or Blaupunkt service center - see "Limited
Warranty Information". To prevent direct exposure to the laser radiation, do not open the cabinet or back of the unit.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measure:
* Reorient or relocate the receiving antenna
* Increase the separation between the equipment and receiver.
* Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY CONCERNS
We always recommend you have your Blaupunkt DVD/MP3 player professionally installed but the installation process is
often so easy that the average consumer can achieve success with little trouble. All operating instructions should be
followed. Regardless of person installing, you should be sure to review the following points before proceeding with the
installation:
I
READ THE MANUAL! Understanding the product and installation limitation before lifting a screwdriver. Follow
Instructions -
I
POWER SOURCES - Make sure to use operate only from the type of power source indicated on the rear panel. For
products intended to operate from battery power, or other sources, refer to the operating instructions. Do not overload
the power source to prevent a risk of fire or electric shock.
POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other
I
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might
be fatal.
I
POWER CABLE - Make sure to route power cables appropriately so that they are not likely to be walked on or pinched
by items placed upon or against them, paying special attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
CLEANING - Disconnect this product from the power source before cleaning. Do not use liquid cleaners or aerosol
I
cleaners. Use a damp cloth.
WATER & MOISTURE - Do not use this product near water.
I
I
ACCESSORIES - Do not place this product on an unstable object. Any mounting of the product should follow the
manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
LIGHTNING - During a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from
I
the power source prevent damage to the product due to lightning and power-line surges.
OBJECT & LIQUID ENTRY - Never push objects of any kind into this product and/or liquid entry to product could result
I
in a fire or electric shock.
I
SERVICING - Any attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards.
DAMAGES REQUIRING SERVICE - Disconnect this product from the power source and refer servicing to qualified
I
service personnel under the following conditions;
a) Damage to the power cord or plug
b) Water damage
c) Product malfunction or change in performance
d) If the product has been dropped
PART REPLACEMENT - Make sure to use the replacement parts specified and/or approved by the manufacturer to
I
prevent potential fire, electric shock or other hazards. Upon completion of any service or repair, be sure to perform
safety checks by qualified service personnel.
WEAR SAFETY GLASSES AT ALL TIMES - Flying debris are always dangerous.
I
I
PROTECT THE VEHICLE - Always disconnect the negative battery cable before starting any kind of installation work.
This prevents a possible high current electrical short (potential fires).
HEAT - Keep all products away from nearby hot components such as amplifiers, radiators, heat registers, stoves or
I
vehicle components that heat up over time such as hoses, high current wires, and braking systems components.
Make sure to leave enough room for ventilation on openings and slots to protect if from over-heating.
GIVE YOURSELF LOTS OF TIME - Rushing to complete an installation nearly always ends up with problems.
I
I
WHILE DRIVING, KEEP EYES ON THE ROAD AND NOT ON THE MONITOR. KEEP THE VOLUME LOW.
Please record the model and serial number located at rear panel.
Model No.
Serial No.
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
THANK YOU FOR CHOOSING BLAUPUNKT!
Congratulations! You are the now the owner of an exceptional in-car (12VDC) & home (110VAC) DVD/MP3 player from
the audio and video enthusiasts at Blaupunkt. Not only do we offer you a great product but also a supportive owner's
manual. Although technically informative, we are also are very concerned about the end consumer using proper
installation techniques for the highest performance possible from their new in-car & home DVD/MP3 player. Most
important to us are concerns with safety and the installation process. Since our Blaupunkt retail dealers have the tools
and experience for an optimized and safe installation, we always recommend they do the final vehicle integration. But,
should you choose to install these products yourself, please take the time to read this manual completely and abide by
all precautions.
KEY FEATURES
1. SUPERB SOUND QUALITY: Dolby Digital
system developed by Dolby laboratories and DTS
developed by DTS Inc., features in DVD and audio CD. *Some DVD/MP3 player might not
ready for DTS features.
2. HIGH DEFINITION:
3. UNIQUE FUNCTIONS:
4. COMPATIBILITY:
The unit adopts MPEG2 coding format and brings the horizontal resolution over 500 lines.
Multi-angle and multi-language bring unique functions if your DVD media has capability.
Compatible with most DVD, SVCD (Super Video CD), VCD (Video CD), CD & MP3
formatted disc (see below).
5. ZOOM & ANGLE:
Enjoy up to 4 times larger pictures on your monitor.
PLAYABLE DISCS
TYPE
DISC LOGO
CONTENTS
DISC SIZE
PLAY TIME (appox.)
DVD Video*
Audio + Video
(motion pictures)
12cm
8cm
2h (for single-sided DVD), 4h (for double-sided DVD)
80min (for single-sided DVD), 160min (for double-sided DVD)
Super Video CD/
Video CD
Audio + Video
(motion pictures)
12cm
8cm
SVCD (45 mins), VCD (74 mins)
VCD (20 mins)
CD
Audio
Audio
12cm
8cm
74 mins
20 mins
MP3**
12cm
10+ hours (128kbits per second or higher compression
recommended)
* Region codes for DVD disc is printed on the rear panel, only the disc with same code can be played.
**This product reads MP3 formatted CD-Rs (CD-Recordable). CD-RW (CD-rewritable) media does not work in the player.
WHAT IS MP3?
It is the compression technology developed by MPEG (the Moving Picture Experts Group) in 1988. MPEG had
developed a compression system for digital television video data and their accompanying soundtracks. The part of the
MPEG format is MPEG audio Layer-3, abbreviated as MP3. It is a special compression technology to fit in smaller
spaces for example, DVD movies, HDTV broadcasts and DSS satellite systems.
A typical MP3 files is about 1/11 the size of an equivalent CD-audio file. Therefore, about 13 hours of CD-quality songs
can be stored in MP3 format. A CD stores songs as digital information. The data on a CD uses a high-resolution,
uncompressed format. Music's analog waveform on digital media (CDs and CD-Rs) is sampled 44,100 times per
second (44.1KHz). The samples are 2 bytes (16 bits) long, and there are 2 separate channels for left and right speakers
for stereo sound. Thus, CD stores 1,411,200 bits per second. (44,100 samples/second x 16 bits/sample x 2 channels)
1.4 million bit per second is 176,400 bytes per second. If an average music is 3 minutes long, music consumes about
32Mbytes of space on CD. An audio CD has a capacity of 654.7 MB, and can store up to 74 minutes of music. The
most common bit rate for MP3 is 128,000 bits per second (128K), which produces very close to CD-quality sound,
1,411,200 bits per second. Now, you see a tremendous space reduction to 9 percent. The more bit rate is the better
sound quality, but more space to store.
NOTE on MP3: For high quality sound, we recommend converting MP3 files with sampling frequency of 44.1KHz and a
fixed bit rate of 128kpbs. Note that the unit may not play tracks in the order that you record them to the disc.
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION WARNINGS!
Before disassembling your beautiful new car you need some basic installation knowledge and skill with common hand
and power tools. Following such basic installation tips and warnings will prevent possible damage to the vehicle and also
prevent possible fires.
I
AGAIN...READ THE MANUAL! There is a lot of helpful information in this manual that will save time and prevent
problems later.
I
COVER THE VEHICLE WORK AREAS - Use fender covers or blankets to protect the work areas from scratches or dings.
DISCONNECT THE (-) LEAD ON THE BATTERY - No sparks or fires please!
"REVIEW" THE INSTALLATION - Before using any tools or moving vehicle components, take five minutes to review the
I
I
installation intentions.
I
"REVIEW" THE VEHICLE - Before drilling any holes or cutting into any surfaces, make sure there are no fuel or hydraulic
lines behind the surfaces. Also make sure there are no wires routed directly behind or near the desired mounting.
ENSURE PROPER FIT - Before cutting or drilling, make sure the DVD/MP3 player will physically fit in its desired location.
I
Check for clearance around rear deck torsion bars or other structural elements.
EVERY CAR IS ASSEMBLED DIFFERENT - Every auto manufacturer uses different assembly techniques. Take care in
I
removing/modifying all trim panels and mounting surfaces since they often use unique screws or snap fasteners that are
difficult to replace if they are lost or broken.
BE CAREFUL WITH CABLE ROUTING - When routing audio cables, make sure RCA and speaker wires are routed away
I
from high current power lines for audio amplifiers and vehicle systems lines when possible. This will help prevent noises
from creeping into the audio system, plus prevent potential damage to the vehicle wiring itself.
BE CAREFUL WITH ALL CONNECTIONS - When making connections, make sure each connection is clean and properly
I
secured. Observe all polarity markings carefully to ensure proper end performance.
CAUTION - FUEL TANKS AND FUEL LINES ARE NOW LOCATED DIRECTLY BENEATH THE REAR DECK IN MANY
I
CARS - CHECK FOR ADEQUATE CLEARANCE BEFORE EVEN CONSIDERING SUCH A MOUNTING LOCATION!
INSTALLATION TOOLS
For most installations, simple hand tools are adequate to install an aftermarket products. Depending upon the mounting
locations used, you will need power tools for drilling and cutting plastics and metal. A good starting list is summarized below:
I
Tape measure and ruler
Marking pen and starting punch
Phillips and flat blade screwdrivers (small and medium sizes)
Nylon wire bundle ties
Pliers: standard vice-grip and needle nose styles
Light-duty trim pry-bar for removing door trim
Cutting shears or nibbling tool for cutting thin and medium gauger metal
Wire cutters, wire strippers, electrical tape, crimping pliers and appropriate crimp-on terminals
I
I
I
I
I
I
I
I
Power drill with appropriate sized drill bits
TERMS FOR DISCS
I
TITLE: The longest sections of a picture or music segment on a DVD. Each title has an indication number, which makes
it easy to locate.
I
CHAPTER: It is smaller than title. A title is composed by several chapters. Each chapter has an assigned number for
search.
I
TRACK: The image or music in a CD. Each track has a number for search.
SCENE: The menu pictures, motion & motionless pictures for SVCD with PBC function can be divided into some pats,
I
the parts are scenes.
I
PBC: Playback operations on SVCD/VCDs. Some playback operations of VCDs may be embedded by software
producers. This feature may not be available all VCDs. Please refer to the supplied manual in your VCDs.
CONDENSATION: Water will appear on the pick up lens with sudden temperature increase. Please do not use this unit
is a humid place. In case of malfunctioning of the unit due to high condensation, unload the disc
and leave the unit on for about an hour to evaporate condensation.
CLEANING:
Use soft cloth with a little neutral detergent to wipe the cabinet, panel and controls. Never use any
type of solvent, such as thinner or benzene.
HANDLING DISC: Do not touch the play side of the disc. Do not attach paper or tape on the disc. Keep the disc away
from direct sunlight or heat source. Store the disc in a disc case after playback. Wipe the disc
outwards from the center with clean clothe before playback
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Power supply
Power Consumption
Operating Temp.
Dimensions
Weight
Signal system
Laser
DC12V, 1.5A
≤ 20W
5˚C to 35˚C (41˚F to 95˚F)
170 x 73 x 215 mm (W/H/D)
1.4Kg
NTSC (US)/PAL/AUTO
Wavelength 650nm
Output level: 1.5 0.25V
Load impedance: 10KΩ
Output level: 1 0.2V
Load impedance: 75Ω
Jack type: Ø 3.5mm headphone jack
10Hz~20KHz 0.5dB
≥ 110dB (“A” weighted)
Supplied Accessories
Audio cable (red and white, 18 ft.)
Video cable (white, 18 ft.)
Remote control
AAA batteries
External remote sensor
Face bezel
DC 12V Power cord (mobile)
AC adapter Input: 100-240V~30W 50/60Hz
Output: DC 12V 1.5A (home)
Mounting brackets
(horizontal & trunk mount)
Mounting screws
1 pair
1
1
2
1
1
1
1
Audio Output (Analog)
Video output
Headphone out
Frequency response
Signal/noise ratio
Audio distortion + noise ≤ -70dB (1KHz)
Channel separation
2
8
1
1
1
Protecting pad
Noise filter for power source
Owner's manual
≥ 85dB (1KHz)
≥ 90dB (1KHz)
Dynamic range
TROUBLESHOOTING
No power:
Check power connection to the unit +12 volt, ground, and remote lines. Use voltmeter to
verify voltages are at terminals of the unit.
No picture:
No sound:
Check video cable connection, color adjustment, and monitor operation.
Check audio cables connection, amplifier or source connection to set receiving DVD signal
output. Check audio mode setting.
Image distortion:
Check signal system (NTSC, PAL, AUTO). Eject the disc and clean it.
Remote control trouble: Check batteries. Point the remote control at the remote control sensor of the unit.
No disc playback:
Make sure insert a playable disc (check the disc type, region code and color system).
Place disc playback side down in the proper guide. Clean the disc. Cancel or change the
parental lock function. (The factory pre-set is 99999.) Turn power switch or power
connection on and off.
NOTE ON COPYRIGHT
I
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
I
I
Manufactured under license from Dolby Digital Laboratories. "Dolby" and the Double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. (c) 1992-1997 Dolby Laboratories, Inc. All rights reserved.
DTS and DTS Digital Out are trademarks of Digital Theater System, Inc.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS BEFORE OPERATION
Remote Control
1. Open the battery cover
2. Insert two AAA batteries, make sure
3. Close the battery cover.
to match “+” and
“–” on the
batteries to
marks inside the
battery
compartment,
4. Point the remote control at the external remote sensor or point the remote control at the display window, operate in the
range of 5 meters and 30° from the front of the remote sensor. Make sure there is no barrier between them.
Notes:
1. The batteries can last about 6 months generally. Change the batteries if the remote control does not work.
2. If the remote control is not used for a long time, remove the batteries to prevent battery leakage.
Front Panel
1
2
3
4
9
8
7
6
5
1
6
7
8
9
Power On/Standby
Disc Tray
Stop
2
3
4
Display
Play
Standby Indicator
Headphone Jack
Open/Close
5 Pause
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS BEFORE OPERATION
Display
Repeat play
indicator
Dolby digital
indicator
Angle
indicator
DVD indicator
Title indicator
Chapter/track indicator
Lock
indicator
CD indicator
TITLE
CHP/TRK
A - B ALL
CD
DVD
PBC
Second
indicator
Minute
indicator
PLAY indicator
Pause indicator
Title/chapter/track
indicator
Hour
indicator
PBC indicator
Rear Panel
1
2
REMOTE IN
VIDEO OUT
R
L
3
4
AUDIO OUT
DC
12V 1.5A
1
2
3
4
Remote In
Video Out
Audio Out
DC In
Names and Layout of Remote Controls
26
Open/Close
Zoom
Menu
Pause
Stop
1
2
3
4
5
6
7
8
14
15
16
17
18
1
DVD & MV/TV Select
Subtitle
25
2
24
23
22
21
20
19
18
3
4
Language
5
6
Repeat
Previous/next
A-B repeat
Color –, + (For MV/TV)
Audio Mode
7
Volume
19
FR/FF Search
Bright –, + (For MV/TV)
P.B.C. (Left Side)
Slow (Right Side)
SetUp Menu
Direction Buttons
Channel –, + (For MV/TV)
Play
TV Display (For MV/TV)
Return
8
9
20
21
17
OSD (On-Screen-Display)
9
16
15
22 System
10
Angle
10
11
23
11
12
13
TV/AV Select (For MV/TV)
Mute
14
24
25
26
Power
12
13
Title
Remote Transmitter
– 8 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS BEFORE OPERATION
Connect to a Mobile Amplifier Turn off all the equipment before connections.
Monitor
External
Remote
Sensor
Video In
REMOTE IN
VIDEO OUT
R
L
AUDIO OUT
DC
12V 1.5A
+
Filter
Fuse
Audio In
12V
–
Mobile Amplifier
In the connection diagram, the system’s power leads should be connected at the same point to minimize noise.
Connect to a TravelPilot DX-N Navigation System Turn off all the equipment before connections.
I
This schematic describes the installation of an After
Market video source, such as VCR, DVD, TV Tuner, or
Video Game, connected to a Blaupunkt DX-N
Navigation System through a Blaupunkt Video
Converter, P/N 7 607 005 718. The Video Converter is
necessary to convert the source’s video signal into a
usable format for the DX-N.
Signal connections include: (a) RCA connection from
the video source’s output to the converter’s input, (b) 15
pin serial connection between the converter' s output
and the DX-N ROM 15 pin input, and (c) DX-N ROM
connection to the DX-N screen, using the supplied
video cable.
DX-N Main Unit (Rear View)
DX-N Monitor Cable
(supplied with DX-N)
Pin 1: 12vdc Constant
5
3
1
6
4
2
Pin 2: Ground
I
Video Converter
Pin 3: Reverse Trigger
Pin 4: 12vdc Output
Pin 5: 12vdc Ignition
Pin 6: Video Trigger (Plus=FBAS)
7 607 005 718
Input
Output
Video In
I
I
Note: When using a gooseneck mounting adapter, P/N
7 612 001 204, the supplied cable will take the place of
the DX-N monitor cable supplied with the DX-N
package.
Note: Video source audio connection can be made via
RF modulator to any factory radio or via RCA cable
through an After Market radio if an auxiliary input is
available.
15 Pin Serial Cable
(supplied with converter)
RCA Cable
Video Line Output
DVD-ME1
DX-N Screen
– 9 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS BEFORE OPERATION
Connect to a TV/Monitor Turn off all the equipment before connections.
Set the unit. You have to set the unit
according to the TV/monitor to be
connected.
I
If the system of the TV/monitor is PAL,
push SYSTEM and select PAL.
If the system of the TV/monitor is NTSC,
External
Remote
Sensor
I
push SYSTEM and select NTSC.
If the system of the TV/monitor is AUTO
I
REMOTE IN
VIDEO OUT
(multi-system), push SYSTEM and select
AUTO.
Connect the unit to a wide-screen TV. Set
R
L
I
AUDIO OUT
the ”TV Display” to “16:9 WIDE” in the
function setting column.
Connect the unit to an ordinary TV. Set the
DC
12V 1.5A
I
“TV Display to “4:3/PS” or “4:3/LB” in the
function setting column.
AC Adaptor
(to AC)
TV/Monitor
CONNECT TO AC ADAPTOR (supplied)
1. Connect the output terminal of the AC
adaptor to DC IN jack of this unit.
2. Connect the other plug to AC power
source.
Video In
Audio In-R
Audio In-L
If you want to enjoy the music by yourself,
please connect the headphone (not
supplied) to the jack on the front panel.
Connect to an Ordinary Home Amplifier Turn off all the equipment before connections.
TV/Monitor
Video In
External
Remote
Sensor
REMOTE IN
VIDEO OUT
R
L
AUDIO OUT
DC
12V 1.5A
AC Adaptor
(to AC)
Audio In-L
Audio In-R
There is no sound output from the output terminal when a DTS disc is played.
– 10 –
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
TV/Video Selection
Press POWER on the TV and audio system.
1. Press “TV/VIDEO” on
the TV/monitor, select
VIDEO mode.
2. Select the correct audio input for your system.
I
Each amplifier is different from another, please refer to the
manual of the amplifier. (e.g., connect the audio output of
the DVD player to the DVD audio input of an amplifier.)
TV/Video
DVD/LD
Note: this step can be cancelled if you are utilizing the
auxiliary input of a Blaupunkt receiver.
DVD
CD
Play Discs
1. Press POWER to
turn on the unit.
2. Press
to
Front Panel
Open/Close
open the disc tray
and load a disc
with the label side
up.
3. Press
again to
4. Press
play the disc.
(PLAY) to
AFTER STEP 4 IS FINISHED:
PLAY DVD
Front Panel
I
close the disc tray. The
unit begins to read the
disc.
The TV screen shows DVD menu or title
menu.
PLAY CD
I
Press
(PLAY), the unit plays the disc
according to the track numbers.
6. Remove the disc and
turn off the power. You
have to push this button
twice to stop playback of
a DVD disc.
5. Stop playback.
Press
DVD
System Settings
According to the
system of the
TV/monitor, set the
system of the unit
to make it match
the TV/monitor.
1. If the system of the
2. If the system of the
PAL
NTSC
System
TV/monitor is PAL:
Press SYSTEM ,
select PAL.
TV/monitor is NTSC:
Press SYSTEM ,
select NTSC.
The screen shows:
The screen shows:
DVD
CD
Pause
WHEN PLAYING
PICTURES
WHEN PLAYING MUSIC CD
STEP
Press
to make playback
If the pictures of DVD are
pause.
Press
played, press
to
(PLAY) to resume
make playback pause.
The unit enters step play
status. Each time you
playback.
Pause
press
, the picture
advances one frame.
– 11 –
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
DVD
CD
OSD (On-Screen Display)
When the OSD is pressed, the
TV/monitor screen shows the
operation functions and
Press OSD to select:
OSD
OSD
OFF
information about the disc.
DVD
CD
Volume Control
I
Press VOLUME on the TV/monitor or
amplifier to adjust the volume.
Press VOLUME on the remote control.
1. Press + to raise
the volume.
2. Press - to lower
the volume.
Volume +, –
I
DVD
DVD Menu Play
Some DVD’s have title menus and chapter menus.
1.
2.
ROOT
MENU
Press
Press
(PLAY), the screen shows the menu.
or to skip the next or previous page,
select with direction buttons.
11.
Example: select track 13.
1. Press to select track 13.
2. Press
(PLAY) to start playing track 13.
12.
ROOT
MENU
13.
14.
15.
Press TITLE once to return to the title menu.
Press MENU once to return to the root menu;
press it again to return to the current playback.
DVD
CD
Audio Mode
Language
I
You may select a needed language from a multi-language DVD.
You may select the right channel or left channel or stereo from a
multi-channel CD.
Mode
I
– 12 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
WHEN PLAYING DVD
WHEN PLAYING CD
Mode
Mode
AUDIO 1/2:AC-3 2CH
MONO L
MONO R
Press
, the screen shows orderly:
AUDIO 2/2:AC-3 2CH
Different discs differ in
languages.
Mode
STEREO
DVD
CD
Mute
When playing a disc, this
function can remove the sound.
1. REMOVE SOUND
Press MUTE , the
2. RESUME SOUND
Press MUTE again, the
MUTE
screen shows “MUTE”.
screen shows “MUTE OFF”.
DVD
CD
Fast Play
When playing a
1. Press
to
2. Press
to
reverse the disc
fast. Each time
you press the
3. Press
(PLAY) to
1
2
3
4
5
FR 2X
FR 4X
FR 6X
FR 8X
PLAY
1
2
3
4
5
FF 2X
FF 4X
FF 6X
FF 8X
PLAY
disc, you may play
it forward fast or
reverse it fast to
play forward fast.
Each time you
press the button,
the screen shows
orderly:
switch to normal play
while FF or FR
playing.
find what you want.
button, the screen
shows orderly:
DVD
Slow Play
SF 2X
SF 4X
SF 6X
Enjoy slow motions
by the following
steps.
1. Press
Slow
to play slowly.
PLAY
2. Press
(PLAY) to play normally.
The screen shows orderly:
– 13 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
CD
Repeat Play
This function can be
used to repeatedly
play a title, chapter,
track, disc, or some
part on a disc.
DVD
You may repeat a title or chapter.
1. Repeat a chapter.
Press REPEAT , the screen will show:
Repeat
2. Repeat a title.
Press REPEAT twice, the screen will show:
Repeat
Repeat
CHAPTER REPEAT
TITLE REPEAT
3. Remove “REPEAT” function.
Press REPEAT until “TITLE REPEAT” disappeared.
CD
You may repeat a track, a disc
according to the following steps.
CD can play repeatedly directly.
1. Repeat a track.
Press REPEAT , the screen shows
“REPEAT ONE”. The unit plays the
current track.
2. Repeat a disc.
3. Remove “REPEAT” function.
Press REPEAT till “REPEAT OFF”
displayed on TV screen.
Press REPEAT , the screen shows
“REPEAT ALL”. The unit plays all the
tracks on the disc.
Repeat
Repeat
REPEAT ONE
REPEAT ALL
REPEAT SOME PARTS
You may press A-B to enjoy some
parts repeatedly when playing a disc.
PLAY DVD, CD.
1. Set a starting point A.
The screen shows:
2. Set an end point B.
Afterwards, the unit plays from A to B.
The screen shows:
3. Press REPEAT again until “REPEAT
AB” disappeared.
A-B
A-B
REPEAT A
REPEAT AB
DVD
Select Subtitles
This operation
PLAY DVD
Subtitle
works only with
discs on which
multiple subtitle
language are
recorded.
1. Press SUBTITLE repeatedly until
the desired language is selected.
The screen shows:
2. Remove the subtitle.
Press SUBTITLE until the screen
shows “SUBTITLE OFF”.
Subtitle
SUBTITLE01/03:ENGLISH
Notes:
I
For some discs, subtitles can not be removed.
I
I
Different discs differ in the language of subtitles.
If the subtitles of discs can not be selected, press SUBTITLE, the screen shows “NO SUBTITLE”.
– 14 –
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
Select Angles
Some discs have
Example:
2. Press
to select other angles, the
images with different
viewing angles, you
may select among
them. For example,
when you watch a
running train, you
may watch it from the
front the left window
or the right window
without stopping it.
A DVD has four viewing angles at your
option.
screen shows respectively:
1. Press
to select ANGLE 1.
2/4 (select ANGLE2)
3/4 (select ANGLE3)
4/4 (select ANGLE4)
Screen
1/4
3. To resume normal playback, press
to select original angle.
DVD
Zoom Play
This function can be
used to watch a
motion or motionless
picture.
DVD
1. Press ZOOM during playback, the
screen shows:
2. Press ZOOM again, the screen
shows:
ZOOM X2
ZOOM X4
Zoom
The picture is enlarged twice the size.
The picture is enlarged four times the size.
3. Push
,
,
,
to move the
4. To resume the picture, push ZOOM
enlarged picture.
until the screen shows “ZOOM OFF”.
FUNCTION SETTING
DVD
CD
2. Press direction buttons (
,
) to
After Entering the menu, the unit
Menu Setting
select and press
Example:
(PLAY) to confirm.
automatically selects a column.
According to the
recorded information
and external
equipment, set the
following functions
for the player to
obtain the best
playing status.
I
Press the directional button
select “DUAL MONO”.
The screen shows:
to
Select “ DOLBY DIGITAL SETUP”
I
Press direction button
to select.
The screen shows:
SetUp
--DOLBY DIGITAL SETUP PAGE--
COMPRESSION STEREO
DUAL MONO >> LEFT MONO
DYNAMIC RING RIGHT MONO
FRONT SPEAKER MIXED MONO
MAIN PAGE
SETUP MENU -- MAIN PAGE
GENERAL SETUP
DOLBY DIGITAL SETUP
PASSWORD SETUP
PREFERENCES
1. Press SETUP to set the main menu.
EXIT SETUP
SetUp
I
Press direction button
select “LEFT MONO”
,
to
I
Press
(PLAY) to confirm and enter
The screen shows:
“DOLBY DIGITAL SETUP”. The
screen shows the submenu for your
selection.
--DOLBY DIGITAL SETUP PAGE--
COMPRESSION STEREO
DUAL MONO >> LEFT MONO
DYNAMIC RING RIGHT MONO
FRONT SPEAKER MIXED MONO
MAIN PAGE
The screen shows:
The screen shows:
SETUP MENU -- MAIN PAGE
GENERAL SETUP
DOLBY DIGITAL SETUP
PASSWORD SETUP
PREFERENCES
--DOLBY DIGITAL SETUP PAGE--
COMPRESSION >> LINE OUT
DUAL MONO
DYNAMIC RING
EXIT SETUP
FRONT SPEAKER
MAIN PAGE
I
Press
(PLAY) to confirm selection.
Set “DUAL MONO” in “DOLBY DIGITAL
SETUP” to “LEFT MONO”.
– 15 –
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETTING
3. Exit from menus.
Press direction buttons and
(PLAY) to select the relevant exit
The screen shows:
SETUP MENU -- MAIN PAGE
GENERAL SETUP
The setting structure is as follows:
GENERAL SETUP PAGE
I
column.
Press the direction buttons
GENERAL SETUP
DOLBY DIGITAL SETUP
PASSWORD SETUP
PREFERENCES
TV DISPLAY >>
4:3/PS
4:3/LB
16:9 WIDE
PAL
AUTO
I
,
to
exit from “DUAL MONO”.
Press the direction button to select
“MAIN PAGE”, press (PLAY) to
I
TV TYPE >>
EXIT SETUP
exit from the current column and
return to the main menu.
The screen shows:
NTSC (US)
I
Press
,
to select “EXIT SETUP” ,
ANGLE MARK >> ON
OFF
CAPTIONS >>
then press
menu setting.
(PLAY) to exit from the
ON
OFF
SCREEN SAVER >> ON
OFF
MAIN PAGE
TV Display
1. 4:3/PS
2. 4:3/LB
3. 16:9 WIDE
This is selected when the unit is
connected to a normal TV. Wide-screen
images are shown on the screen, but
with some parts cut automatically.
This is selected when the unit is
This is selected when the unit is
connected to a wide-screen TV.
connected to a normal TV. Wide-screen
images are shown on the screen, with
black belt on the top and bottom.
TV Type
Screen Saver
Dual Mono
You may select according to the color
system of the TV/monitor to be
connected.
Start the screen saver, the screen
saver image appears when the unit
stops or the image is frozen for a few
minutes. This saver can keep the
screen from being damaged.
This is the output mode of the L and R
signals of the set audio output. If it is
set to “MIXED MONO”, the function
only works when the DVD being played
is 5.1 channel.
I
Select “AUTO” for a multi-system
TV/monitor.
Select “NTSC” for ra NTSC
I
I
ON: Start the screen saver.
I
OFF: Remove the screen saver.
TV/monitor. (US)
Select ”PAL” for a PAL TV/monitor.
Dynamic Range
I
DOLBY DIGITAL SETUP
When the compression mode is set to
“LINE OUT”, this is selected to adjust linear
compression rate to obtain the different
compression results of the signals.
The setting structure is:
--DOLBY DIGITAL SETUP PAGE--
Angle Mark
COMPRESSION >> LINE OUT
DUAL MONO >> STEREO
LEFT MONO
This only works when there is an angle
mark on the disc.
I
Select “ON” , the screen shows the
RIGHT MONO
MIXED MONO
Front Speaker
mark when playing DVD.
Select “OFF” , the mark is not
I
I
STEREO Lt/Rt
DYNAMIC RNG
shown.
Select this when you play a disc with
dolby Pro Logic stereo, the disc signals
can be decoded by the unit and be
reproduced the realistic theater effects
in your room.
FRONT SPEAKER >> STEREO Lt/Rt
MAIN PAGE
Captions
I
ON
The hidden subtitle is shown.
I
STEREO
Compression
I
Select this, the audio output is
produced as an ordinary stereo
signals.
OFF
I
LINE OUT: Compress input signals
The hidden subtitle is turned off.
linearly.
– 16 –
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION SETTING
I
LANGUAGE SELECTION
Password SetUp
Preferences
If a language mentioned above is
recorded on the disc, you can select
sounds, subtitle or disc menu
languages. If not, the language
recorded on the disc is shown.
The setting structure is:
The setting structure is:
AUDIO >>
ENGLISH
--PASSWORD SETUP PAGE--
PASSWORD MODE >> ON
OFF
FRENCH
SPANISH
CHINESE
JAPANESE
I
PARENTAL LOCK
When playing the disc with parental
lock function, you may select an age
control grade according to to grade of
disc and your desire.
SUBTITLE >> ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
I
PASSWORD MODE
• ON: The password works,
“PREFERENCES” is dim and can
not be selected.
• OFF: The password is locked,
“PREFERENCES” can be selected.
Example: Select “PG” , you cannot
play DVD video disc rated higher than
the PG grade. Parental control grades
are listed from high to low, kids is the
highest grade , adults is lowest grade.
OFF
DISC MENU >> ENGLISH
CHINESE
FRENCH
SPANISH
JAPANESE
COUNTRY >> CHINA
Enter the password according to the
screen.
Note: The factory set password is:
next symbol, next symbol, next
symbol, next symbol, next symbol
(press next button 5 times).
I
DEFAULT>> RESET
Each function setting returns to the
initial status in the factory if you select
this option.
FRANCE
HONG-KONG
JAPAN
TAIWAN
Note:
GBR
• “PREFERENCES” only can be
selected password OFF after the unit
goes into stop mode.
USA
PARENTAL >> 1. KID SAFE
2. G
3. PG
4. PG 13
5.
6. PG-R
7. NC-17
8.ADULT
DEFAULTS >> RESET
– 17 –
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 OPERATIONS
Press
menu.
(PLAY) to enter the sub-
3. Remove repeat function.
Play Discs
Repeat
MP3 is an audio compression mode
which adopts the Layer 3 in
3. Press
according to the sub-menu.
or
to select tracks
international standard MPEG. It
compresses audio signals with a ratio
of 12:1. With MP3, a disc may record
over 600 minutes of music or 170
songs, but the sound quality ia as
good as a CD.
Example: Select track 2 on CD3. (The
80th song on the disc.)
The screen shows:
REPEAT OFF
The screen shows:
TRACK 80
MENU2
01
03
05
00:15
CD3
02
04
06
08
Note: 128 kbps or higher only.
SELECT TRACKS WITH MENUS
1. Load a disc, the screen shows the
home menu after the unit finishes the
search.
07
TOTAL 170
MP3 DISC
CONTINUE
MENU1
CD1 CD2
CD3 CD4
The unit will play the tracks you
selected a few seconds later.
Other Functions
4. Press RETURN to return to the
home menu.
When playing an MP3 disc, the unit has
functions like mute, volume control,
pause, previous/ next track, and
channel selection. You may operate as
you do with a CD.
If the menu is shown on different
pages, the screen shows
to instruct you to look at the next or
previous page.
or
Repeat Play
NOTE on MP3: For high quality sound,
we recommend converting MP3 files
with sampling frequency of 44.1KHz
and a fixed bit rate of 128kpbs. Note
that the unit may not play tracks in the
order that you record them to the disc.
You may use repeat function to enjoy
some track.
2. Select the content of the home
menu.
Repeat
1. Select tracks to play.
2. Press REPEAT until the screen
shows “REPEAT ONE”.
Press
or
to select (if you select
CD3), the screen shows:
The screen shows:
REPEAT ONE
TOTAL 170
MP3 DISC
CONTINUE
MENU1
CD1 CD2
CD3 CD4
– 18 –
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
Using Headphone
• Insert the headphone into the
PHONE jack.
• Use the VOLUME button on the
remote to adjust the volume of the
phone.
• When enjoying stories and music
using headphone, set the volume to
min before playing, then slowly
adjust the volume control to suitable
location.
Installation Guide
DVD-ME1
Connect the unit to car mobile DC 12V.
Impending installation
Flat washer
Spring washer
Bracket
1. Fix the
bracket to the unit with screws.
2. Fix the unit to the car through mounting holes.
Screws
Horizontal placement
DVD-ME1
Spring washer
Flat washer
Bracket
1. Fix the
bracket to the unit with screws.
2. Fix the unit to the car through mounting holes.
Cushion plate
Note: Please remove the disc when the unit is not in use.
– 19 –
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY INFORMATION (UNITED STATES ONLY)
Robert Bosch Corporation warrants new Blaupunkt car audio and video products it distributes in the United States
through authorized Blaupunkt dealers, or which are imported as original vehicle equipment by the automobile
manufacturer, to be free from defects in material and workmanship, in accordance with the following: For twelve (12)
months after delivery to you, the original consumer purchaser, we will repair or at our option replace at no charge to you
any car audio and video product which, under normal conditions of use and service, proves to be defective in materials
or workmanship. However, this warranty does not cover expenses incurred in the removal or reinstallation of any car
audio and video product, whether or not proven defective, and does not cover products not purchased from an
authorized Blaupunkt dealer. This warranty is limited to the original consumer purchaser and is not transferable.
Repaired and replacement car audio and video products shall assume the identity of the original for purpose of this
warranty and this warranty shall not be extended with respect to such products. To obtain performance of this
warranty, contact the nearest Blaupunkt authorized repair facility or our nearest office. A dated purchase receipt or other
proof that the product is within the warranty period will be required in order to honor your claim. Carefully pack the unit
and ship prepaid to the servicing location. For further information, write to the Robert Bosch Corporation, 2800 South
25th Avenue, Broadview, Illinois, 60155, attention Blaupunkt Customer Service Department or call 1-800-266-2528.
Specifically excluded from this warranty are failures caused by misuse, neglect, abuse, improper operation or
installation, dropping or damaging, unauthorized service or parts, or failure to follow maintenance instructions or
perform normal maintenance activities. Normal maintenance activities for car audio and video products include but are
not limited to cleaning and other minor maintenance activities and adjustments that are outlined in the owner's manual
or that are normally required for continued proper operation. Also excluded from this warranty is the correction of
improper installation and the elimination of any external electromagnetic interference. This warranty sets forth your
exclusive remedies with respect to the products covered by it. We shall not be liable for any incidental, consequential,
special or punitive damages arising from the sale or use of any Blaupunkt car audio and video products, whether such
claim is in contract or tort. No attempt to alter, modify, or amend this warranty shall be effective unless authorized in
writing by an officer of Robert Bosch Corporation. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY IMPLIED BY LAW, WHETHER FOR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE AND SHALL BE EFFECTIVE ONLY
FOR THE PERIOD THAT THIS EXPRESS WARRANTY IS EFFECTIVE. In the event any provision, or any part or portion
of this warranty shall be held invalid, void or otherwise unenforceable, such holding shall not affect the remaining part or
portions of that provision or any other provision hereof.
NOTICE TO CALIFORNIA OWNERS: If your Blaupunkt car audio product needs warranty repair service and there is no
authorized service center reasonably close to you, you can return the defective unit to the dealer from whom you
purchased it, or you can return it to any dealer who sells Blaupunkt car audio and video products. The dealer may, at
the dealer's option, replace, repair or refund the purchase price for any Blaupunkt car audio and video products which
prove defective under conditions of normal use. If the dealer fails to repair, replace, or partially refund your money, you
may take your Blaupunkt car audio and video product to any repair shop and they can repair your unit at our expense
unless the repair cost exceeds the depreciated value of the unit, but you must contact Blaupunkt to receive
authorization to do this before your car audio and video product is repaired.
ROBERT BOSCH CORPORATION
BLAUPUNKT CUSTOMER SERVICE
2800 SOUTH 25TH AVENUE
BROADVIEW, IL 60155
TEL: 1-800-266-2528
BLAUPUNKT TECHNICAL SUPPORT
This player is designed to install quickly and easily into most vehicles. Should you experience installation problems, we
will make all reasonable efforts to help you, the end purchaser or Installation Technician, to competently install these
components. Before calling us please carefully review this owners manual for the answers to your questions. Should
you need navigation system tech support, please refer to www.blaupunktusa.com before picking up the phone. In case,
you need individual assistance, please call 1-800-266-2528 from 9AM to 4 PM (CST).
– 20 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Robert Bosch Corporation
Sales Group - Blaupunkt Division
2800 S. 25th Avenue, Broadview, Illinois 60155 U.S.A.
Copyright 2001 by the Robert Bosch Corporation
No portion of this work may be reproduced in any form without the written consent of the Robert Bosch Corporation
Printed in China (5/01)
Download from Www.Somanuals.com. All Manuals Search And Download.
|