Radio / CD
München RDM 169 US
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Repeating a track/CD ........................... 23
TPM (Track Program Memory)............. 23
MIX........................................................ 24
Selecting MIX functions .................... 24
SCAN .................................................... 25
Assigning names to CDs ...................... 25
Deleting the CD name/TPM store using
DSC-UPDATE ...................................... 25
Condensed instructions................ 4 Radio operation with RDS........... 16
Activating/deactivating RDS ................. 16
AF - alternative frequency .................... 16
Remote control RC 08 ................. 11
Important ...................................... 12
Selecting the frequency band............... 16
Station tuning ........................................ 17
Paging through the transmission chains
(FM only)............................................... 17
Changing the memory level (FM) ......... 17
Storing stations ..................................... 17
Automatically saving the strongest
station with Travelstore ........................ 18
Calling up stored stations ..................... 18
Sampling stored stations with
Preset Scan .......................................... 18
Sampling stations with Radio Scan ...... 19
Changing the sampling time (Scan) ..... 19
Changing the sensitivity of the
seek run ................................................ 19
Toggling between stereo and mono
Read the following before using
the unit .................................................. 12
Traffic safety ......................................... 12
Installation............................................. 12
Telephone mute .................................... 12
Accessories .......................................... 12
Guarantee ............................................. 12
International hotline .............................. 12
Clock - Time.................................. 26
Setting the time..................................... 26
Displaying the time ............................... 26
Correcting the time following an
interruption to the power supply ........... 26
Deactivating hours adjustment ............. 26
KeyCard anti-theft protection
system........................................... 13
Equalizer setting .......................... 27
Switching on the unit ............................ 13
Removing the KeyCard ........................ 13
Teaching in a second KeyCard/
replacing a KeyCard ............................. 13
Displaying the radio passport data ....... 14
Visual display for anti-theft
Adjustment instructions ........................ 27
Adjusting the frequency level ............ 27
Selecting a quality factor for the
bass or mid-range ............................. 28
Selecting the preset sound setting 28
Tips on adjusting the equalizer ......... 29
(FM) ...................................................... 19
Automatic bandwidth switching
protection .............................................. 14
Care of the KeyCard ............................. 14
KeyCard lost/damaged ......................... 14
Teaching in the new KeyCard .............. 14
Input errors ........................................ 14
(SHARX) ............................................... 19
PTY – Program Type ............................ 20
Program type ........................................ 20
Programming with DSC............... 30
Overview of the factory default settings
with DSC ............................................... 32
CD mode/CD changer mode ....... 22
Inserting a CD ....................................... 22
Removing the CD ................................. 22
Activating CD mode .............................. 22
Activating changer mode ...................... 22
Selecting the display type..................... 23
Selecting CD and track......................... 23
Technical data .............................. 32
Glossary of technical terms ....... 33
Selecting the operating mode .... 15
Enhancing display legibility ....... 15
Installation and
connection instructions ............ 135
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
2 ON
Switching on the unit
Switching the unit on/off using the
KeyCard
1 Disengaging the fold-down control
panel
Insert the KeyCard and press ON brief-
ly.
The unit is switched on in the last op-
erating mode selected and with the
previously selected volume.
Insert/remove the KeyCard to switch
the unit on and off.
Refer also to the description of the
KeyCard anti-theft system @ in the
condensed instructions.
Disengage the control panel to insert
or remove the KeyCard and CD.
To disengage the control panel, press
knob 1: the control panel folds down.
The control panel cannot be removed,
nor should it be used a shelf.
Switching on/off by the ignition
The unit may be connected up such
that it is switched on and off by the ve-
hicle ignition.
To re-engage the control panel, push it
back into its original position (Arrow 3).
When the ignition is switched off, a
double beep reminds you to remove
the KeyCard before leaving the vehi-
cle.
Switching off the unit
Press ON for approx. 1 second.
The display can be adjusted for the de-
sired viewing angle in order to improve
legibility. Refer to “Improving the legi-
bility of the display” if necessary.
1
Switching on whilst the ignition is
off
With the ignition off (and the KeyCard
inserted), proceed as follows to oper-
ate the unit:
3
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
When leaving the vehicle, open the
control panel and remove the Key-
Card in order to prevent theft.
Switching the sound on/off
Press ON briefly. “MUTE” appears on
the display when the sound is switched
off.
To switch the sound back on again,
turn the volume knob 3.
Press ON when the double beep
sounds.
The unit is switched on.
The unit switches itself off automatical-
ly after an hour’s use in order to pre-
vent the vehicle battery from running
down.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
3 Adjusting the volume
Menu level 1
Menu level 2
Turn the knob to adjust the volume.
Station keys and memory levels
Adjusting radio functions
The selected value is shown on the
display. When switched on, the unit
plays at the preselected volume (ON
VOL).
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
ON VOL can be changed (refer to
“Programming with DSC – ON VOL”).
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
4 Softkeys/display
ST1 - ST6
BND
Softkey = key with variable function.
The functions shown in the display can
be selected.
ST1- ST6 can be used on this menu
level to store radio stations on the FM
levels I, II and “T”.
Select the frequency band and memo-
ry level (FM I, FM II, FM T, AM, AMT).
You can store six stations each on the
AM and AMT bands.
Store station – press one of the sta-
tion buttons ST1- ST6 until the station
can be heard again (beep).
Call up station – select the frequency
band. On FM, select the memory level
using NEXT and press the appropriate
station key briefly.
SCA - Scan
Radio mode
a) PTY is deactivated (logo is lit nor-
mally, not in reverse video)
Press SCA (Radio Scan) briefly –
“SCAN” appears in the display alter-
nately with the code of the sampled
station. All stations on the frequency
band which can be received are sam-
pled briefly.
In radio mode, use TU to toggle be-
tween menu level 1 and menu level 2.
The system automatically returns to
menu level 1 when no key has been
pressed for eight seconds.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
Press SCA for approx. 1 second (Pre-
set Scan) –
key (hold down for approx. 2 seconds
until the beep sounds).
for a frequency with better reception
for the same station.
a beep sounds, “SCAN” appears in the
display alternately with the code
of the sampled station.
AF on/off: Select menu level 2 using
TU and hold AF down.
CD and changer mode
The stations stored on the station keys
and which can be received are sam-
pled briefly.
EXIT
Press the key briefly to terminate or
abort the adjustment process.
Stopping Radio Scan/Preset Scan:
Press SCA or the seek rocker again.
ENT (Enter)
Press briefly to accept/save the adjust-
ments.
MIX, SCAN, RPT (repeat) and TPM
can be selected in CD and changer
mode by means of the corresponding
softkeys.
b) PTY is activated (logo appears in
reverse video on the display)
TS (Travelstore)
Press TS to switch from any frequency
band to FMT or AMT. The six stron-
gest stations are automatically stored.
When they have been stored, the
strongest station is selected and
played.
MIX
CD tracks can be played in random or-
der.
You can select the following functions
by pressing the MIX key:
Press SCA –
the stations transmitting the selected
PTY program type are sampled briefly.
PTY (Program Type)
PTY turns the station keys into pro-
gram type keys.
“PTY” must first appear on the display
in reverse video (press PTY if neces-
sary).
A program type can now be stored and
selected with each station key.
Call up PTY program types using the
rocker << >> and save with the station
- MIX CD = CD tracks are played in
random order.
In changer mode, CDs are selected
in numerical order, tracks are played
in random order.
- MIX MAG (changer mode only) = all
tracks in the magazine are played in
random order.
AF
(RDS mode/Alternative Frequency)
RDS mode on/off: Select menu level 2
using TU and press AF briefly.
If “AF” appears in reverse video in the
display, the radio automatically looks
- MIX OFF = Switches off function.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
SCA - Scan
For sampling the tracks briefly (in CD
changer mode, the tracks of all CDs).
TPM - Track Program Memory
For storing and playing preferred
tracks in CD and CD changer mode.
Up to 30 CDs can be managed in CD
mode and 99 CDs in changer mode
with a maximum of 40 tracks per CD.
(Refer to the “Storing tracks with TPM”
section.)
6 Rocker
Radio mode
If the rocker is pressed on menu level
2, menu level 1 is automatically called
up.
Starting Scan:
Press SCA. The tracks are sampled
briefly in turn in ascending order. The
sampling time can be adjusted.
(Refer to “Programming with DSC –
SCANTIME”.)
CLR
For clearing the TPM memory (refer to
the “Clearing the TPM memory” sec-
tion).
Ending Scan:
Press SCA. The last track selected
continues playing.
/
Station seek
Up
5 DPE
Down
RPT - Repeat
For activating/deactivating the equaliz-
<< / >> Up/down in steps
(on FM, only when AF and PTY are
deactivated)
CD tracks and, in changer mode, CDs,
can be repeated.
Press the RPT key to select the follow-
ing functions:
er and changing the equalizer settings.
Activating/deactivating the equalizer:
Press DPE until the beep sounds.
When the equalizer is activated, “EQ”
appears in the display.
FM only:
- REP TRCK = Repeat track
- REP CD = Repeat CD (only in
changer mode)
<< / >> Page through the transmission
chains when AF is activated and
PTY deactivated,
Changing the equalizer settings:
Press DPE briefly. Further information
on changing the equalizer settings:
“Equalizer settings”:
- RPT OFF = Deactivate function.
e.g.: NDR 1, 2, 3, 4, N-JOY ... .
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
CD and CD changer mode
7 DSC (Direct Software Control)
You can adjust programmable default
settings using DSC.
The values selected are shown on the
display. The last setting selected is
stored automatically.
Further information: “Programming
with DSC”.
Particular feature of loudness:
The values can be selected between
LOUD 6 and LOUD OFF by means of
8 AUD
the rocker
/
.
For adjusting the treble, bass, balance
(left/right), fader (front/rear) and loud-
ness settings.
Loudness = adjustment of the low-
volume sounds to the human ear.
<< / >> Select CD (changer mode only)
>>
<<
Up: Press briefly
Down: Press briefly
Leaving AUD:
Press EXIT.
If no change is made within eight sec-
onds, AUD is automatically switched
off.
/
Select track
Different treble, bass and loudness
settings can be stored for the FM, AM,
CD and AUX modes.
Up: Press briefly
CUE - fast forward (audible):
Keep depressed
Down: Press twice or more in quick
succession
Replay track from beginning:
Press briefly
REVIEW - fast rewind (audible):
Keep depressed
Adjustment procedure:
Select mode.
Press AUD once: “BASS” and the se-
lected value appear on the display.
Further functions of the rocker:
Further settings available with
AUD
DSC-MODE
PTY
8
7
The settings are available only if the
corresponding function is activated.
Select from the options using << / >>.
Use
/
to change the settings.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
9 DIS
Changer mode
Selecting various display modes.
Press DIS briefly:
- CD number, track number, time
- CD number, track number, time
played
Radio mode
Press DIS briefly:
- Name of the selected station
- Currently selected frequency
- PTY code
A condition is that an RDS station can
be received with an adequate field
strength.
- CD name, track number
TRACK 13 - Track number
or
VIVALDI - CD name (CD changer mode)
or
CD 5 T 2 - CD number and track number
(CD changer mode)
: Display
MIX
- Tracks can be played in ran-
dom order
SCA
RPT
- Sample tracks
- Repeat function for CD/
changer mode
- Save and play preferred
tracks
- Clear TPM memory
NDR2
FM
I, II, T
- Station name
- Frequency band
- Memory level I, II or Travel-
store
- Program type is activated
- Alternative frequency with
RDS
TPM
CLR
Press DIS for approx. two seconds:
Toggle display between time and fre-
quency band (incl. memory level in the
case of FM).
PTY
AF
lo
- Seek sensitivity can be se-
lected with DSC
CD mode
EQ
DISC-IN
- Equalizer is activated
- CD is inserted
Press DIS briefly:
FM I, II, T - FM memory level
or
AM, AMT - Frequency band
or
- Track number, time
- Track number, time played
- CD name, track number
00:20
or
- Time (time played)
12:50
- Time
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Condensed instructions
The ignition is off and LED ON is se-
lected in the DSC menu (factory de-
fault setting).
Remove the KeyCard following the
procedure in reverse.
Important: read the information under
“KeyCard anti-theft protection system”.
; CDC
Switch to changer mode (only if a
changer is fitted).
If a changer is not fitted, AUX is selec-
ted. Condition: AUX ON must be se-
lected in the DSC menu.
Further information: “Programming
with DSC, LED ON/OFF”.
A Eject
Hold the key for CD ejection down for
approx. 2 seconds: the CD is ejected.
@ KeyCard anti-theft protection sys-
tem
< CD
Switch to CD mode
The KeyCard must be inserted before
the unit can be operated.
= TU (TUNER)
For switching to the radio mode, for
toggling between FMI, FM II, TS (Trav-
elstore), AM and AMT memory levels/
frequency bands.
KeyCard
Inserting the KeyCard
> Slot for CD
To disengage the control panel, press
key 1. The control panel folds down.
Insert the KeyCard with the contact
surface facing downwards (see dia-
gram). Engage the control panel.
When the CD is inserted with the label
facing upwards it is automatically
transported into the operating position.
CD play mode is selected automatical-
ly.
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
When leaving the vehicle, open the
control panel and remove the Key-
Card in order to prevent theft.
? Visual anti-theft protection
The following conditions must be met if
the LED is to flash as a visible anti-
theft protection measure:
The unit is switched off;
The control panel is open;
1
The KeyCard is removed;
3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control RC 08
D Keys <</>>,
/
E
Switching replay on/off:
Radio mode
Press
briefly. “MUTE” appears on
Station seek
Up
the display when the sound is switched
off.
19
Down
18
<</>> Up/down in steps (on FM only
when AF is deactivated)
FM only:
20
21
<</>> Page through the transmission
chains, if AF is on, e.g. NDR 1,
2, 3, 4, N-JOY ... .
CD and changer mode
B V- / V+
<</>> Select CD (changer mode
Adjust the volume
only)
>>
<<
Up: Press briefly
Down: Press briefly
C SRC (Source)
Select the operating mode
- Radio
- CD
/
Select track
Up: Press briefly
CUE - fast forward (audible):
Keep depressed
- Changer mode (if a changer is con-
nected)
Down: Press twice or more in
quick succession
Replay track from beginning:
Press briefly
REVIEW - fast rewind (audi-
ble): Keep depressed
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
CD changer
The following CD changers can be fitted di-
rectly:
CDC A 06, A 071, A 072, A 08, IDC A 09.
CD changers A 05 and A 071 can be fitted
by means of the 7 607 889 093 adapter ca-
ble.
Telephone mute
Read the following before using
the unit
If a mobile phone is connected, radio and
CD sound can be muted automatically when
the phone is in use (telephone mute).
“PHONE” then appears on the display.
Before using the car radio, read the follow-
ing instructions carefully.
Traffic safety
Accessories
Traffic safety is of paramount importance.
Always use your car radio system in a way
which enables you to cope with the traffic
situation.
Guarantee
Only use accessories and spare parts ap-
proved by Blaupunkt.
The following Blaupunkt products can be
used with this unit:
The unit is guaranteed in accordance with
the statutory provisions of the country in
which it was purchased.
Remember that your vehicle covers 45 feet
a second at a speed of 32 mph.
Irrespective of the statutory provisions, Blau-
punkt guarantees the unit for twelve months.
Remote control RC 08
In critical situations, do not operate the ra-
dio.
Should you have any questions concerning
the guarantee, please consult your dealer.
Your receipt suffices as proof of guarantee.
You must remain able to hear warning sig-
nals, for example from police and fire ser-
vice vehicles, immediately and reliably.
The RC 08 infrared remote-
control permits operation of
the chief functions from the
steering wheel.
Keep the volume therefore at a reasonable
level whilst driving.
International hotline
Do you have any questions regarding oper-
ation of the unit, or do you require further
information?
Installation
Simply give us a call.
You can reach us on the following numbers:
If you intend to install or modify the system
yourself, read the installation and connec-
tion instructions at the end of the operating
instructions before doing so.
Amplifier
All Blaupunkt amplifiers
Tel. 800-266 25 28
Fax: 708-681 71 88
12
Download from Www.Somanuals.com. All Manuals Search And Download.
KeyCard anti-theft protection system
Two KeyCards are supplied with the unit.
•
•
Slide the card as far as possible to the
right, and remove from the front.
Should you lose or damage a KeyCard, you
can obtain a replacement from a specialist
dealer.
Engage the control panel.
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
When leaving the vehicle, open the
control panel and remove the Key-
Card in order to prevent theft.
If you are using two KeyCards, the settings
are taken from the first KeyCard.
1
3
You can customize the following functions:
•
Slide the card in the direction of the ar-
row (2) and engage the control panel
(Arrow 3).
Station key assignment, bass, treble, bal-
ance and fader settings, loudness, beep
volume, LOW-EQ, HIGH-EQ.
The car radio is ready for use.
The last state selected such as frequency
band, station setting, AF, SCAN-TIME, seek
run sensitivity, ON VOL (volume at switch
on), SHARX, is also saved.
Teaching in a second KeyCard/
replacing a KeyCard
Should a KeyCard other than that belong-
ing to the unit be inserted, CARD ERR” ap-
pears on the display.
An additional KeyCard can be “taught in”
whilst the unit is in operation with the first
KeyCard.
The unit switches itself off after approx. 10
seconds.
Your selected settings are therefore select-
ed automatically when you insert your Key-
Card.
Should a card other than a KeyCard be in-
serted (e.g. a phonecard or credit card),
“WRONG KC” is displayed for approx. 2
seconds.
To “teach in” a second KeyCard:
•
•
•
Slide the first KeyCard in and switch
the unit on.
Switching on the unit
Press DSC and use
/
to select
•
Switch on the unit with ON.
In this case, remove the card and insert a
KeyCard for the unit.
“LEARN KC”.
To insert the KeyCard, disengage the con-
trol panel:
Press << or >>.
•
Press ON to switch on the unit.
“CHANGE” appears on the display.
•
Press the knob 1: the control panel
•
Remove the first KeyCard and, with
“CHANGE” on the display, insert the
new KeyCard.
folds down forwards.
Removing the KeyCard
•
Insert the KeyCard with the contact
surface downwards, as shown in the
diagram (Arrow 1).
Disengage the control panel as follows
•
Press the knob 1: the control panel
When “READY” or “LEARN KC” appears:
folds down forwards.
•
Press DSC.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
KeyCard anti-theft protection system
The unit is now also ready for operation with The unit is switched off; the control panel is
Teaching in the new KeyCard
the new KeyCard.
open; the KeyCard is removed; LED ON is
selected in the DSC menu (default factory
setting).
•
Insert the new KeyCard and engage
the control panel.
A maximum of two KeyCards can be taught
in.
•
•
Press ON.
If necessary, refer to “Programming with
DSC – LED”.
If a third KeyCard is taught in, the card which
is not employed for the teaching-in process
of the new card automatically loses its va-
lidity.
Press TU and ST1 within 5 seconds:
“0000” appears on the display.
Deactivating the flashing LED
•
•
Using the rocker, enter the four-digit
master code from the car radio pass-
port:
Select “LED OFF” in the DSC menu to de-
activate the flashing LED.
Displaying the radio passport
data
/
- Enter the digits (press once for
one, twice for two, etc.)
Care of the KeyCard
You can use the KeyCard supplied to call
up the radio passport data such as the unit
name, type number (7 6 ...) and serial num-
ber on the display.
Refer to “Programming with DSC – READ
KC” for the procedure.
<< >> - Select the insertion point
The KeyCard will function perfectly only if
the contacts are kept free of foreign parti-
cles. Avoid touching the contacts directly
with your hands.
After entering the correct master code,
press ENT.
The new KeyCard is accepted when the unit
switches to play.
If necessary, clean the KeyCard contacts
using a cotton bud soaked in alcohol.
Input errors
Visual display for anti-theft
protection
Should the input not be correct, “CODE
ERR” appears on the display. After three
successive incorrect inputs, “WAIT 1h” ap-
pears on the display. The unit remains in
Wait mode for one hour.
KeyCard lost/damaged
Should you damage or lose the KeyCard for
your unit, you can teach in a new KeyCard.
You can purchase the new KeyCard from
your dealer. You will also require the mas-
ter code for the unit, which can be found in
the car radio passport.
Anti-theft protection is provided in the form
of a flashing LED ? when the vehicle is
parked and the KeyCard removed.
•
Switch the unit off and on again.
The following conditions must be met:
Battery positive and constant battery posi-
tive are connected as described in the in-
stallation instructions.
Repeat the teach-in process.
Keep the car radio passport in a safe
place, but not in the car.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the operating
mode
Enhancing display
legibility
You can select from the radio (TU), CD and The display can be adjusted to your pre-
CDC changer modes.
ferred viewing angle in order to enhance
legibility.
CD mode can be selected only if a CD is
inserted.
Proceed as follows:
CDC can be selected only if a Blaupunkt A
06, A 072, A 08 or A 05, A 071 or IDC A 09
CD changer is connected and a magazine
containing at least one CD is inserted.
•
Press DSC.
“ANGLE” appears on the display.
Toggling between operating modes:
•
Press TU, CD or CDC.
If TU is pressed again, menu level 2 is called
up. Radio function adjustments can be made
on this level. Menu level 1 is called up auto-
matically if no input is made for approx. eight
seconds.
•
Use the rocker << >> to select opti-
mum legibility for your driving position.
After selecting the setting:
Press DSC.
•
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
The Radio Data System provides FM recep-
tion with enhanced convenience.
Note:
AF - alternative frequency
AF is deactivated when you switch off RDS.
The AF (alternative frequency) function en-
sures that the best available frequency of
the station being received is selected auto-
matically.
An increasing number of radio stations now
broadcast RDS information supplementary
to the program proper.
Selecting the frequency band
You can select from the following frequen-
cy bands:
As soon as stations can be recognized, the
station code appears, in some cases with
indication of the region, e.g. NDR1 NDS
(Niedersachsen).
Switching AF on/off:
During radio mode
FM
AM
87.7 – 107.9 MHz,
530 – 1710 kHz as follows:
•
•
Press TU: menu level 2 is called up.
Hold AF down until the beep sounds.
•
Press TU: menu level 2 is displayed.
Activating RDS causes the station keys to
function as program keys. You now know
exactly what station you are receiving, and
you can therefore also select the desired
station.
This function is active when “AF” is lit in the
display.
Activating/deactivating RDS
Activating/deactivating RDS:
During radio mode
Menu level 2
The radio may be muted briefly during the
search for the channel with the best recep-
tion.
•
Press TA briefly.
•
Select the frequency band by pressing
BND repeatedly until the desired fre-
quency band appears.
The selected settings appear briefly on the
display. When RDS is activated, “AF” ap-
pears in reverse video on the display.
If “SEARCH” appears on the display when
the unit is switched on or when a stored fre-
quency is called up, the unit is automatical-
ly searching for an alternative frequency.
The sequence is: FM I, FM II, FMT, AM,
AMT.
“SEARCH” disappears when an alternative
frequency has been found, or when the
waveband has been completely searched.
If the station can no longer be received with
satisfactory quality:
•
Select a different station.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
•
Press NEXT briefly and repeatedly un-
til the desired memory level appears
on the display.
If necessary, these functions can be deacti-
vated on menu level 2.
Station tuning
Station seek
/
Manual tuning:
•
Press / : the radio automatically
looks for the next station.
•
Press << >>: the frequency is in-
If
/
is held down at the top or bottom, the
creased/reduced in steps.
seek run continues forwards or backwards
at higher speed.
Hold the << >> rocker down to the right or
left to change the frequency quickly.
Paging through the transmis-
sion chains (FM only)
Storing stations
You can use << >> to call up stations from
You can store six stations on the FM band
on each memory level (I, II, T) using the sta-
tion keys ST1 - ST6.
the region in which they can be received.
Station seek
If a number of programs in the station chain
can be received, you can page through them
with >> (forwards) or << (backwards), e.g.
NDR 1, 2, 3, 4... .
Up
Down
You can also store six stations each on the
AM/AMT bands. Proceed as follows:
<< / >> Up/down in steps
(on FM, only when AF is deactivated)
•
•
•
Press TU: menu level 2 is displayed.
Select the frequency band using BND.
Select a station using the rocker (auto-
You can also start Travelstore, for exam-
ple:
Manual tuning with << >>
•
Press TU: menu level 2 is displayed.
If “AF” fails to come on:
Hold down AF on menu level 2.
You can tune manually.
matically
/
or manually << >>).
Condition:
•
•
Hold the desired station key down until
the program can be heard again after it
has been muted and the beep sounds
(approx. 2 seconds).
AF and PTY are deactivated (the corre-
sponding symbols are not lit in the display).
Changing the memory level (FM)
You can change between memory levels I,
II and T to store stations and retrieve them
again. The selected memory level appears
on the display.
The station is now stored.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
Note:
Calling up stored stations
Sampling stored stations with
Preset Scan
Should you store a station which has already
been stored, the corresponding station key
and the memory level flash briefly if a differ-
ent memory level is called up.
You can call up stored stations at the touch
of a button.
You can sample stored stations briefly on
all frequency bands and on the selected FM
memory level.
FM
Call up the stations directly on the selected
memory level as follows:
Preset Scan can be started only when PTY
is disabled (“PTY” is not lit on the display).
Automatically saving the stron-
gest station with Travelstore
•
Press the keys ST1 - ST6.
If necessary, deactivate PTY on menu level
2. Proceed as follows:
To call up stations on a different memory
level:
You can store the six strongest FM and AM
stations in the current reception region au-
tomatically in the order of field strength. This
function is particularly useful on long jour-
neys. Proceed as follows:
•
Press TU and disable PTY using the
PTY key.
•
Press NEXT until the desired memory
level is displayed, then select a stored
station with ST1 - ST6.
Starting Preset Scan:
Press SCA for approx. 1 second.
•
•
•
Press TU: menu level 2 is displayed.
Press TS briefly.
All stored stations on the frequency band
which can be received are sampled briefly
in turn. “SCAN” and the flashing station
name/frequency appear alternately on the
display.
“T-STORE” flashes on the display.
The six strongest FM stations are automat-
ically stored on the “T” (Travelstore) memo-
ry level. If fewer than six stations can be
received, four lines appear through the
memory locations which are not occupied.
When the procedure has been completed,
the strongest station (ST 1) is selected.
Stations can also be stored manually on the
Travelstore level if required (see “Storing
stations”).
Selecting sampled stations/terminating
Preset Scan:
AM, AMT
•
Press SCA or one of the rocker keys
briefly.
You can call up the stations on the selected
frequency band directly:
•
Press the keys ST1 - ST6.
Calling up stations on the other frequency
band:
•
Press NEXT: the other frequency band
is displayed. Then select the stored
stations using ST1 -ST6.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
Sampling stations with
Radio Scan
Changing the sampling time
(Scan)
Toggling between stereo and
mono (FM)
You can sample briefly the stations which The sampling time can be selected between You can toggle between stereo and mono
can be received on the selected frequency 5 and 30 seconds.
band.
in the DSC menu. This can be useful in ar-
eas where reception is critical. When the unit
is switched on, stereo is selected automati-
cally.
If you wish to change the duration of the
Radio Scan can be started only when PTY sampling time, refer to “Programming with
is deactivated (“PTY” is not lit on the dis- DSC – SCANTIME”.
play).
When reception is poor, the unit switches
smoothly to mono.
If necessary, deactivate PTY on menu level
2. Proceed as follows:
Changing the sensitivity of the
seek run
If you wish to switch to mono, refer to “Pro-
gramming with DSC – STEREO/ MONO”.
•
Press TU and disable PTY using the
PTY key.
You can change the sensitivity of the auto-
matic seek run.
The state selected appears briefly on the
display.
Switching on Scan:
Press SCA briefly.
If “lo” is displayed, seek only recognizes sta-
tions with good reception (low sensitivity).
•
Automatic bandwidth switching
(SHARX)
All stations on the frequency band which can
be received are sampled briefly in turn.
“SCAN” and the flashing station name/fre-
quency appear alternately on the display.
If “lo” is not displayed, seek also recognizes
stations with poorer reception.
You can activate automatic bandwidth
switching on the FM band by means of the
SHARX function in the DSC menu.
To adjust the sensitivity, refer to “Program-
ming with DSC – FM/AM Sens”.
Selecting a sampled station/deactivat-
ing Scan:
This is very useful when a number of sta-
tions are close together.
•
Press SCA or one of the rocker keys
briefly.
Interference from strong adjacent stations
is largely eliminated when SHARX ON is
selected (factory default setting).
If a station is not selected, Scan is switched
off automatically when the seek function has
passed through the complete frequency
range. The station previously selected is
played.
If necessary, refer to “Programming with
DSC – SHARX”.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
After the beep, the program type of the sta-
tion currently being received is displayed.
PTY – Program Type
Condition: PTY is activated.
The program types listed below are avail-
able:
This is an RDS service which is being im-
plemented progressively by the radio sta-
If “NONE” is displayed, the station has no
PTY code.
tions. The service enables FM stations to NEWS
INFORM
SPORTS
be selected according to a specific program
content. After selecting the program type,
Displaying the selected program type
you can select the stations using seek or TALK
•
Press << or >>.
ROCK
Scan.
The last program type selected is displayed
briefly.
CLS ROCK
ADLT HIT
SOFT ROCK
TOP 40
COUNTRY
OLDIES
SOFT
NOSTALGA
JAZZ
Activating/deactivating PTY:
Selecting the program type
•
Press PTY.
When the function is activated, the last pro-
gram type selected, e.g. “SPORT”, is dis-
played briefly. “PTY” remains on the display
as long as PTY is activated.
a) Using the station keys
If PTY is activated, the program types
defined by the factory can be selected
by means of the keys ST 1 - ST 6.
• Press one of the keys 1 - 6.
CLASSICAL
R + B
The selected program type appears on
the display for two seconds.
SOFT R + B
LANGUAGE
REL MUSIC
REL TALK
PERSNLTY
PUBLIC
To listen to a station broadcasting this
program type:
• Start the seek run with / .
If no station broadcasting the selected pro-
gram type is found, “NO PTY” appears brief-
ly on the display, and the beep sounds. The
last station selected is played.
Program type
WEATHER
You can display the last program type se-
lected and select a different program type
with << >>.
Prompting the station for the program
type
You can assign different available program
type to each memory location. Refer if nec-
essary to the “Saving the program type” sec-
tion below.
Use the station keys 1 - 6 to select stored
program types.
On menu level 2:
•
Hold PTY down for approx. 2 seconds.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
b) With the seek run rocker << >>
•
Hold the desired key (ST1- ST6) down
until the beep sounds.
Example:
If PTY is activated, you can select a
program type with << >>.
-
-
-
-
-
-
-
-
-
Previous station: NDR 3.
The selected program type can be called up
by means of this key when PTY is activated
(“PTY” appears on the display).
“PTY” on the display
• Press << or >>: the last program
type selected is displayed for three
seconds.
“POP” selected
Seek run started
Sampling stations with PTY-SCAN
No station with “PTY-POP” found
Display shows “NO PTY” and
Switches back to NDR 3 automatically
NDR 2 is broadcasting “PTY-POP”
• During this time, select the desired
program type with >> (forwards) or
<< (back).
Condition: “PTY” must be displayed.
•
Press SCA.
The stations with this program type which
can be received are sampled briefly.
• Press << or >> as many times as
necessary.
Unit switches within the station chain
to NDR 2 and plays it as long as the
station continues to broadcast “POP”.
Deactivating PTY-SCAN:
To listen to a station broadcasting this
program type:
•
Press SCA or the seek rocker again.
Following a frequency seek run, PTY-SCAN
is automatically deactivated.
• Start the seek run with / .
The unit also switches automatically in CD
mode to the station broadcasting the selec-
ted program type within the transmission
chain.
When the PTY program is over, the unit
switches back to the source previously se-
lected (radio or CD).
If no station broadcasting the selected pro-
gram type is found, “NO PTY” appears brief-
ly on the display, and the beep sounds. The
last station selected is played.
PTY priority
Situation:
PTY is activated, the logo appears on the
display.
No station broadcasting the selected pro-
gram type can be received at this time (by
seek or by Scan).
Storing the program type
A program type is stored on each of the keys
ST1 - ST6 by the factory.
You can however store other available pro-
gram types.
“PTY” must be displayed before you can
store a different program type.
Note:
As already mentioned, these functions are
not currently available with all RDS stations.
The unit switches back to the previous sta-
tion.
As soon as a station broadcasting the se-
lected program type can be received within
the station chain, the unit switches to this
station in radio mode for the duration of the
program.
•
If necessary, activate “PTY” using the
PTY key.
•
Select the program type with << >>
and
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode/CD changer mode
This unit enables you to play CDs.
CDs can also be played with the aid of a
Blaupunkt CDC A 06, A 072, A 08, A 05,
A 071 or IDC A 09 CD changer.
These changers are available from your
dealer.
•
Fold the control panel up on the left-
hand side and engage.
Activating CD mode
A CD is inserted, “DISC-IN” appears on the
display.
•
Press CD: the CD functions (track
number, name/time played) appear on
the display.
Note:
Only use standard circular 12 cm diameter
CDs.
8 cm diameter CDs or CDs with different
shapes, e.g. of a butterfly or beer glass, are
not suitable for playing.
Such CDs present a serious risk of damage
to the CD and to the drive.
Removing the CD
•
With the control panel disengaged,
hold the Eject key (arrow) down for ap-
prox. 1 second.
We can accept no liability for damage aris-
ing from the use of unsuitable CDs.
Changer mode
The CD is ejected.
Do not obstruct or assist automatic inser-
tion or ejection of the CD, as the mecha-
nism may otherwise be damaged.
Activating changer mode
CD mode
A magazine containing at least one CD must
be inserted.
Inserting a CD
If the CD is not removed, it is drawn in again
automatically after approx. 30 seconds.
•
Press CDC: the changer functions
such as CD and track number, name/
time played appear on the display.
•
Switch on the unit and disengage the
control panel with knob 1.
The control panel drops forward.
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
•
Insert the CD (with the label facing up-
wards) without using force.
The CD is automatically transported to the
playing position. The CD is played.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode/CD changer mode
Selecting the display type
Selecting CD and track
Repeating a track/CD
You can switch the display type over in CD You can select CDs, tracks and parts of You can repeat a track or (in changer mode)
and changer replay mode: tracks conveniently using the rocker. CDs a CD continually.
can be selected only if a changer is fitted.
You can select the following functions us-
ing the RPT key:
- REP TRCK = Repeat track
- REP CD = Repeat CD (only in changer
mode)
- RPT OFF = Deactivate function.
•
Press RPT repeatedly until the desired
function is activated.
<</>> Select CD (changer mode only)
•
Press DIS repeatedly until the desired
display type is selected.
>>
<<
Up: Press briefly
Down: Press briefly
The track or the CD is played repeatedly until
you switch to “RPT OFF” using RPT.
“CD 10”
– CD number (appears in
changer mode only)
/
Select track
Up: Press briefly
CUE - fast forward (audible): Keep
depressed
Down: Press twice or more in quick
succession
Replay track from beginning: Press
briefly
“TRACK 13” – track number
TPM (Track Program Memory)
“14:34”
“00:20”
– Time
For storing and playing preferred tracks in
CD and CD changer mode. Up to 30 CDs
can be managed in CD mode and 99 CDs
in changer mode with a maximum of 40
tracks per CD. TPM is active only in the
mode in which the track program was stored
(CD or changer mode).
– Time played
“VIVALDI” – CD name
The name of the CD can be displayed only
if a name has been entered.
REVIEW - fast rewind (audible): Keep
depressed
Refer to the “Assigning names to CDs” sec-
tion below.
The rocker acts as a sequence switch:
pressing it repeatedly causes several CDs
or tracks to be skipped.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode/CD changer mode
Storing tracks with TPM
MIX
Clearing the TPM memory
A track can be stored only whilst it is being
played.
You can clear tracks stored with TPM.
TPM tracks can be cleared with CLR only
during replay.
CD tracks can be played in random order.
MIX is activated when “MIX” appears in re-
verse video on the display.
To store:
•
Hold TPM down for approx. 1 second:
“TPM PROG” appears on the display.
•
Activate TPM.
You can select from the following MIX func-
tions:
“TPM” appears on the display in re-
verse video. In this case, “CLR” ap-
pears below TPM.
This track has been stored.
MIX CD
Tracks on the selected CD are played in
random order. In changer mode, the remain-
ing CDs are selected in numeric order. MIX
applies to the order in which the tracks are
played (random).
Activating/deactivating TPM replay
If you wish to delete the current track only:
•
Hold CLR down for approx. 2 seconds:
“TRCK CLR” appears briefly on the
display.
•
Press TPM briefly. The activated state
is indicated briefly on the display (TPM
ON/OFF).
If you wish to delete all TPM tracks on the
CD:
MIX MAG (changer mode only)
CDC A 08, IDC A 09: All tracks in the mag-
azine are played in random order.
•
Hold CLR down for approx. 5 seconds:
“DISC CLR” appears briefly on the dis-
play.
CDC A 05, A 06, A 071, A072: The CDs are
selected in random order; all tracks of the
selected CD are then replayed in random
order.
To delete the stored TPM tracks of all CDs
in changer mode:
•
Hold CLR down for approx. 8 seconds:
If “TPM” is shown in reverse video on the
display, TPM replay is activated. All tracks
on the CD which were stored with TPM in
the operating mode are played. If SCA
(Scan) is activated in addition to TPM, only
the stored tracks are sampled.
MIX OFF
“ALL CLR” appears on the display.
MIX is deactivated. CDs are played in nu-
meric order.
If you wish to delete TPM and CD names
simultaneously, refer to “Deleting CD name/
TPM store using DSC-UPDATE”.
Selecting MIX functions
TPM replay can be switched on only if tracks
have been stored using TPM.
•
Press MIX briefly: the display signals
briefly the activated state.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode/CD changer mode
SCAN
The letters of the alphabet in capitals (A-Z), You can delete the names and TPMs of all
the numbers 0-9 and special characters stored CDs with “CLR ALL”.
For brief sampling of the CD tracks.
appear in turn.
A CD the stored data (name and TPM) of
Starting SCAN:
•
Move to the next underline using the
rocker << >>, and select a character.
which are to be deleted must be replayed
for this purpose.
•
Press SCA briefly: “SCAN” appears on
the display.
Up to eight characters can be selected in
this way.
•
•
Press DSC.
Press repeatedly until “UPDATE”
appears on the display.
The tracks are sampled briefly in turn in as-
cending order.
/
Storing/terminating the input:
Ending SCAN:
•
Press ENT to store the input.
If you wish to abort input of this name:
Press DSC.
If you wish to enter a name for another CD:
•
Use >> “CLR DISC” for selection if you
wish to delete the name and TPM of
the stored CD.
•
Press SCA briefly.
The last track selected continues playing.
•
SCAN is also terminated when the rocker,
MIX, RPT, DSC, AUD, TU or CDC are
pressed.
Or
•
•
In CD mode, insert a new CD.
Use << “CLR ALL” to select if you wish
to delete the names including TPMs of
all stored CDs.
Or
•
In changer mode, press the rocker
Assigning names to CDs
<< />> and
•
Hold ENT down for approx. 1 second:
“DELETING” appears briefly on the
display.
Names can be assigned to up to 30 CDs in
CD mode and 99 CDs in changer mode.
•
Use
/
to select from the magazine
the next CD to which a name is to be
assigned.
This name (e.g. VIVALDI) appears in the
display when you have selected the corre-
sponding display mode using DIS.
The display operation has been completed.
To change a name, enter and save other
characters (overwrite).
To return to the DSC menu item “UPDATE”
without deleting CD names and TPMs:
Starting input:
•
Press ENT briefly
Deleting the CD name/TPM store
using DSC-UPDATE
•
Press the DSC key and
/
repeated-
ly until “CD/C-NAME” appears in the
display.
The stored names and the TPMs of CDs can
be deleted simultaneously by means of
DSC-Update.
•
Press << >>.
The first input field flashes.
You can delete the names and TPMs of the
inserted CD with “CLR DISC”.
•
Now select a character using the rock-
er / .
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock - Time
If you wish to correct the time manually, re-
fer to “Programming with DSC – CLOCK-
SET”.
The unit has an internal clock which is set Displaying the time
automatically through RDS for absolute ac-
The time can be displayed in radio and CD
mode.
curacy.
A condition for correction by RDS is that an
RDS transmitter with CT function (CT = clock
time) is being received.
Radio mode:
Deactivating hours adjustment
The display can be toggled between time
and frequency band (incl. memory level in
the case of FM) as follows:
Correction of the hours can be deactivated
by “CLK MAN/CLK AUTO” in the DSC menu.
The minutes continue to be corrected.
Automatic correction of the time can be de-
activated.
•
Press DIS for approx. 2 seconds.
This is useful if you wish to display the time
of a different time zone, for example.
Setting the time
CD mode:
If necessary:
a) Automatically
You can select from three different display
modes:
•
•
Press DSC briefly and
Press repeatedly until “CLK MAN/
CLK AUTO” is displayed.
The time is set automatically when an
RDS transmitter with the “CT” (clock
time) function is being received.
/
- Track number, time
- Track number, time played
- CD name, track number
To deactivate hours correction, select << >>
“CLK MAN”.
b) Manually by means of DSC-
CLOCKSET
To toggle:
•
Press DIS briefly.
• Press DSC briefly: “CLOCKSET” ap-
pears on the display.
Correcting the time following an
interruption to the power supply
• Press << >> to set the hours/min-
utes. The flashing range can be ad-
If the unit has been isolated from the supply
voltage for a longer period, “0:00” is dis-
played when the power is reconnected.
justed with
/
.
• After correcting the time, press ENT
briefly to save the setting.
The time is corrected automatically by RDS-
CT, but can also be adjusted manually.
The time need be adjusted manually only if
an RDS station with CT (clock time) is not
being received.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer setting
The parametric filters can be adjusted ex- Now read the “Tonal effect/problem” column
The sound in the vehicle is influenced deci-
sively by the acoustic characteristics of the
passenger compartment, substantially more
than by the characteristics of the loudspeak-
ers.
actly without instruments.
in the table, and look for solutions under
“Measure”.
In addition, you can select from seven pre-
programmed equalizer settings, which are Use the LOW EQ filter for settings in the
adjusted for different musical styles. Refer bass and lower mid-range, and the HIGH
to the “Selecting pre-set sound settings” EQ filter for the treble and upper mid-range.
The position and installation of the loud-
speakers and the volume to the rear, for ex-
ample of the door or rear shelf, are howev-
er also important.
section.
The “HIGH EQ” and “LOW EQ” filters can
The steps required for adjustment are de- be adjusted in the DPE menu:
scribed in the table.
•
Press DPE to call up the DPE main
Even when suitable loudspeakers have
been selected and installed properly, reso-
nances in the passenger compartment may
have a detrimental effect upon the sound.
menu.
Adjustment instructions
Adjusting the frequency level
The instructions below represent a recom-
mendation only. You can adjust the sound
characteristics according to your own per-
sonal preference.
•
•
•
•
Press
/
repeatedly until “HIGH EQ”
This can result in the bass frequencies
booming or being absent, mid-frequencies
encroaching excessively, musical instru-
ments or voices being strongly distorted, or
the sound generally being muffled.
or “LOW EQ” appear in the display.
Press << or >> once or several times
to select the frequency.
We recommend that you use a familiar mu-
sic CD for adjustment of the filters. The CD
should include tracks with a range of instru-
ments and voice. Pure electronic music is
not suitable for evaluation purposes, since
the original sound is not known.
Press
/
once or several times to
adjust the level (GAIN +8 ... GAIN -8).
The subjective sound impression can be
improved considerably by suppression or
amplification of certain frequency ranges by
the car radio.
Press << or >> once or several times
to select a different frequency and to
adjust the level accordingly.
Before adjusting the equalizer, set the bass,
treble, balance and fader to “0”.
•
•
Press DPE or EXIT to save the select-
ed level and to return to the DPE main
menu.
This unit is equipped with two parametric fil-
ters. The first filter, “LOW EQ”, can be ad-
justed from 32 to 500 Hz, the second, “HIGH
EQ”, from 630 to 10 000 Hz. In this case,
parametric means that one frequency can
be increased or reduced for each of the two
filters (+10 to -20 dB). The bandwidth/qual-
ity of the two filters can also be adjusted.
This setting is described in the condensed
instructions under 8 AUD.
Press DPE or EXIT again to close the
DPE menu.
Now listen to the CD with which you are fa-
miliar.
Evaluate your impression of the sound ac-
cording to your taste.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer setting
To activate/deactivate the equalizer, hold
DPE down for approx. 2 seconds.
Selecting a quality factor for the bass
or mid-range
Selecting the preset sound setting:
Selecting a preset influences the equalizer
and sound settings of the unit.
This enables you to compare the sound with
and without equalizer.
•
•
•
Press
/
repeatedly until “LO-Q-
Each selected preset can be adjusted man-
ually. When a different preset is selected,
however, the factory default setting is re-
stored. Your personal sound settings for
BASS, TREBLE, EQ and LD are stored in
the “USER” preset mode.
FAC” or “HI-Q-FAC” appear in the dis-
play.
Press << or >> once or several times
in order to set the quality factor (Q-
FACT 1 to Q-FACT 3).
Press
/
to save the selected factor
To call up the presets:
and return to the DPE main menu.
•
Press
/
repeatedly until “PRESET”
Or
•
appears on the display.
Press DPE or EXIT to save the select-
ed factor and to close the DPE main
menu.
•
Press << or >> once or several times
to select the (*USER* >> LINEAR >>
ROCK >> DISCO >> JAZZ >>
CLASSIC >> VOCAL) equalizer set-
ting.
•
Press
/
to save the selected equal-
izer setting and return to the DPE main
menu.
Or
•
Press DPE or EXIT to save the select-
ed equalizer setting and to close the
DPE main menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Equalizer setting
Tips on adjusting the equalizer
Begin adjustment with the mid-range/treble and complete it with the bass range.
Frequency ranges
Tonal effect/problem
Measure
Note
Bass range
30 to 100 Hz
Bass response too weak
Increase the bass with
Filter: “LOW EQ”
Frequency: 50 to 100 Hz
Level: +4 to +6 dB
Avoid distortion.
Raise the level cautiously if
the loudspeaker diameter is
too small.
Lower mid-range
100 to 400 Hz
Bass not clean
Reduce the lower mid-frequen- The tonal response may be-
Booming
Unpleasant pressure on the ears
cies with Filter: “LOW EQ”
Frequency: 125 to 400 Hz
Level: Approx. -4 dB
come too thin and aggressive.
Pay attention to the fundamen-
tal tone range of the music.
Mid-range
400 to 4 000 Hz
Sound lacks depth,
aggressive, no stereo effect
Reduce the mid-frequencies
with Filter: “HIGH EQ”
Reproduction must not be-
come too faint.
Frequency: 1 000 to 2 500 Hz
Level: -4 to -6 dB
Tonal response too weak.
Treble
4 000 to 20 000 Hz
Response is dull
Clarity lacking
Instruments lack brilliance
Increase the treble range with
Filter: “HIGH EQ”
Frequency: Approx. 10 kHz
Level: +2 to +4 dB
Avoid a sharp tonal response.
Loud hissing impairs the quali-
ty.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming with DSC
ANGLE
Adjust the display to your
own viewing angle.
nates interference from ad-
jacent stations.
“SHARX ON” is the factory
default setting.
The car radio offers the facility to adjust cer-
tain settings and functions to your require-
ments and to store these changes with the
aid of DSC (Direct Software Control).
DIM DAY
Select the display bright-
ness for daylight (Stages 1-
9).
The default settings are selected at the fac-
tory.
HICUT
Interference-driven treble
reduction.
An overview of the factory default settings
is provided below for future reference.
DIM NIGHT Select the display bright-
ness for darkness (Stages
1-9).
Treble frequencies are re-
duced only when interfer-
ence is present. Can be se-
lected from NO HICUT
(OFF) to HICUT 3 (strongest
treble reduction). Decide for
yourself which setting is the
most pleasant.
To alter a programming setting:
•
Press DSC.
The brightness is switched
over automatically by the
headlights.
Select and adjust the functions described
below by means of the rocker and the ENT
key. The status of adjustment is shown on
the display.
ON VOL
Select the initial volume.
Use << >> to select the de-
sired initial volume.
FM/AM SENS
If “LAST VOL” is selected,
the initial volume is the
same as that last selected.
Change the sensitivity of the
seek run.
“SENS 1” indicates close re-
ception, “SENS 6” distant
reception.
Select “SENS 1” if you wish
to receive strong stations in
the near range; select
“SENS 6” if you also wish to
receive weaker, distant sta-
tions.
PEAK ON/OFF
Activate/deactivate the dy-
/
Select function
<< >>
Adjust/call up value
namic volume level display.
SHARX
Automatic bandwidth switch-
ing on the FM band.
Where the station density is
high, switch to SHARX ON
with << >>: this largely elimi-
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming with DSC
STEREO/MONO
CLK AUTO/MAN
For activating/deactivating
SCANTIME This setting defines the
sampling time (5 - 30 sec-
onds) for radio broadcasts
and CD tracks.
Toggle << >>.
The display indicates the se-
lected state briefly.
STEREO is selected auto-
matically when the unit is
switched on.
automatic hours correction.
Refer also to “CLOCK time,
hours correction”.
AUX ON/OFF This menu item does not ap-
pear when a CD changer is
connected. “OFF” is the de-
fault factory setting.
12/24H MODE
Select the time display
(12-hour or 24-hour).
AMP DELAY Energization delay of exter-
nal amplifiers. DLAY OFF
signifies no energization de- CLK ON/OFF The time can be displayed
lay. DLAY 1 to DLAY 4 sig-
nify the energization delay in
seconds.
If an external unit is con-
nected through AUX, “ON”
must be selected.
with the ignition on and the
unit switched off. Select
CLK ON in this case.
LEARN KC This function enables you to
teach in a second KeyCard.
Refer to the instructions un-
der “KeyCard anti-theft pro-
tection system”: “Teaching
in a second KeyCard”.
CDC NAME Displayed only in CD replay BEEP
mode.
Confirmation signal for func-
tions which require a key to
be held down for approx. 1
second.
The volume can be selected
from 0 to 9 (0 = off).
You can use this function to
assign any desired name to
the CDs. (Refer to “Assign-
ing names to CDs”.)
READ KC
The data can be read out
from a KeyCard.
CLOCKSET Manual adjustment of the
time.
LED ON/OFF You can select between
LED ON and LED OFF.
Unit data such as name,
type number (76...) and seri-
al number are displayed by
the KeyCard supplied.
Should you remove the Key-
Card during the read pro-
cess, “READ KC” appears in
the display.
Use << >> to select hours/
minutes. The flashing range
When LED ON is selected,
the “ON” knob flashes to
provide additional security
when the unit is switched off
and the KeyCard removed.
can be adjusted with
/
.
Press ENT briefly to save
after completing the setting.
Refer also to “CLOCK time”.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming with DSC
Technical data
UPDATE
In CD and changer mode,
this function enables the
names of CDs to be deleted
in order to create space for
new CDs. (Refer to “Delet-
ing CD names with DSC-
UPDATE”.)
Overview of the factory default
settings with DSC
Amplifier
Output power:
4 x 25 watts sinusoidal
ANGLE
0
to DIN 45 324 at 14.4 V
4 x 40 watts max.
power
DIM DAY
9
DIM NIGHT
ON VOL
PEAK ON/OFF
SHARX
9
LAST VOL
ON
Tuner
SHARX ON
HICUT 2
SENS 6
STEREO
DLAY OFF
-
TUNER
Selecting the reception
Frequency bands:
FM :
AM :
HICUT
range for your country. The
frequency range in kHz with-
in the waveband is shown in
brackets for each setting.
87.7 – 107.9 MHz
530 – 1710 kHz
FM/AM SENS
STEREO/MONO
AMP DELAY
CDC NAME
CLOCKSET
FM sensitivity:
0.7 µV at a signal-to-
noise ratio of 26 dB.
USA (AM 10, FM 200)
LATIN (AM 10, FM 200)
EUROPA (AM 9, FM 100)
0:00
CLK AUTO / MAN CLK AUTO
FM mono sensitivity:
7.8 dBf
FM transmission range:
20 - 16 000 Hz
12/24H MODE
CLK ON/OFF
BEEP
24H MODE
CLK OFF
3
End DSC programming/store settings:
•
Press DSC.
LED
ON
SCANTIME
AUX
10 sec.
OFF
CD
LEARN KC
READ KC
UPDATE
-
-
-
Transmission range:
20 - 20 000 Hz
We reserve the right to make changes!
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary of technical terms
AF – Alternative Frequency
ENT (Enter)
PTY
With RDS, this function ensures that the best Press briefly to accept/save the adjust- For selection of a desired program type in
frequency of the current program which can ments.
be received is selected automatically.
FM mode (e.g. sport, news).
Refer also to RDS.
Equalizer
Amplifier
Quality
Sound control for adjustment of the frequen-
Power amplifier for increasing the output cy response to the acoustic conditions and Edge steepness of the frequency filters in
power.
personal taste.
the parametric equalizer.
AUD – Audio
EXIT
RDS – Radio Data System
Sound adjustment of basses and trebles, Press the key briefly to terminate or abort Service provided by the broadcast stations
adjustment of the right/left (balance) and the adjustment process.
front rear (fader) volume ratios.
KeyCard
for improved listening convenience.
For example, the station name is shown in
place of the frequency.
BND (Band)
Blaupunkt’s anti-theft protection system. The Further RDS functions include:
Selection of the frequency band and the unit can be operated only with the correct
AF – Alternative Frequency
PTY – Program Type
memory level.
KeyCard.
CL – Clear
MIX
RPT (Repeat)
Return to the previous menu item.
Play CDs/CD tracks in random order.
Repeat CD tracks. Tracks or CDs can be
repeated in CD changer mode.
DSC – Direct Software Control
Preset Scan
DSC can be used to adjust certain factory See SCAN.
default settings according to the user’s per-
sonal requirements.
Preset Equalizer
Preprogrammed sound settings
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossar - Fachwortverzeichnis
SCAN
For brief sampling of the radio stations which
can be received, or of the tracks in CD mode.
The stored radio stations can be sampled
with Preset Scan.
Softkey (Software key)
Key with variable function.
SRC – Source
Toggles the source between radio and CD
changer.
TPM – Track Program Memory
For storing and playing preferred tracks in
CD and CD changer mode.
TS – Travelstore
Automatically saves the station with the
strongest reception; can be called up using
the station keys.
Particularly useful on long journeys.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Blaupunkt-Werke GmbH
Bosch Gruppe
08/99 Sc
K7/VKD 8 622 402 096
Download from Www.Somanuals.com. All Manuals Search And Download.
|