Blaupunkt Car Stereo System C52 User Manual

Radio / Cassette  
Bologna C52  
Carolina DJ52  
Operating instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
6
4
1
3
7
8
9
5
11 10  
13 12  
16 15  
14  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
1
button - unlatches the flip/  
release panel  
9
button - opens the flip/release  
panel  
2
3
Volume control  
Button - switches the radio and  
mute function on/off  
:
;
Arrow-key block  
OK button - confirms menu en-  
tries and starts the scan function  
4
RDS button - switches RDS con-  
venience function on/off (radio  
data system).  
Selects variable radio texts.  
BND button (band), source se-  
lection for radio mode,  
selection of FM memory levels  
and the wavebands MW and LW  
TS, starts the Travelstore func-  
tion.  
Display (display field)  
button - indicates the time on  
the display  
<
=
X-BASS button to adjust and  
switch X-BASS on/off  
AUDIO button (Audio) - adjusts  
bass and treble, balance and  
fader  
Key block 1 - 6  
TRAF button, switches traffic in-  
formation standby on/off  
5
>
?
@
SRC button - selects between  
Cassette, CD changer (if con-  
nected) and AUX sources  
6
7
DIS, change display contents  
8
MENU button - selects the menu  
for basic settings  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Playing a Track Repeatedly ............... 39  
Sampling All the Tracks on a  
Cassette (SCAN) ............................. 40  
Fast Winding.................................... 40  
Pausing During Play ......................... 40  
Switching the Radio Monitor  
On / off ............................................ 40  
Skipping Blank Tape......................... 41  
Selecting Tape Type ......................... 41  
Dolby* B Noise Reduction ................ 41  
Notes and accessories ............. 28  
Road safety ...................................... 28  
Installation ........................................ 28  
Accessories ..................................... 28  
International telephone information.... 28  
Flip/release panel ..................... 29  
Switching on/off ....................... 30  
Volume adjustment ................... 31  
Setting the switch-on volume ............ 31  
Mute setting ..................................... 31  
Telephone Audio/Navigation Audio.... 31  
Setting the volume for the  
CD changer mode..................... 42  
Starting CD changer mode............... 42  
Selecting a CD................................. 42  
Selecting a track .............................. 42  
Fast track selection .......................... 42  
Fast search (audible) ........................ 42  
Changing the display ........................ 42  
Repeating individual tracks or  
whole CDs (REPEAT)....................... 42  
Random play (MIX) ........................... 43  
Scanning all tracks on all CDs  
(SCAN) ............................................ 43  
Interrupting Play (PAUSE) ................ 43  
confirmation tone.............................. 32  
Radio mode............................... 33  
Switching to radio mode ................... 33  
RDS function (AF, REG) ................... 33  
Selecting the waveband/memory ...... 33  
Tuning into a station .......................... 34  
Setting the sensitivity of the station  
search mode .................................... 34  
Storing stations ................................ 34  
Storing stations automatically  
(Travelstore) ..................................... 35  
Listening to preset stations ............... 35  
Scanning receivable stations  
(SCAN) ............................................ 35  
Setting the scanning time ................. 35  
Programme type (PTY) ..................... 35  
Optimising radio reception................ 37  
Selecting running text display ........... 37  
Setting the display ............................ 37  
CLOCK - Time ........................... 44  
Tone and volume balance ......... 45  
Adjusting the bass ............................ 45  
Adjusting the treble .......................... 45  
Setting the volume distribution  
left/right (balance) ............................ 45  
Setting the volume distribution  
front/rear (fader)............................... 45  
X-BASS ..................................... 46  
Setting the level indicator ......... 46  
External audio sources ............. 47  
Technical data ........................... 47  
Traffic information..................... 38  
Cassette Operation ................... 39  
Cassette Play ................................... 39  
Cassette Ejection ............................. 39  
Changing Direction of Play ............... 39  
Skipping Tracks (S-CPS) ................. 39  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
Thank you for deciding to use a Blau-  
punkt product. We hope you enjoy us-  
ing this new piece of equipment.  
Installation  
If you would like to install your car radio  
yourself, please read the installation and  
connection instructions at the end of the  
manual.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
Accessories  
Please use only Blaupunkt-approved  
accessories.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the equip-  
ment, please contact your dealer or the  
telephone hotline for your country. You  
will find the hotline telephone numbers  
printed at the back of this booklet.  
Remote controls  
The most important functions can be  
selected safely from the steering wheel  
using the optional remote controls RC  
08 and RC 10.  
Amplifiers  
We provide a manufacturer guarantee  
for our products bought within the Eu- All Blaupunkt amplifiers are suitable for  
ropean Union. You can view the guar- use with the radio.  
CD changer  
or ask for them directly at:  
The following Blaupunkt CD changers  
Blaupunkt GmbH, Hotline CM/PSS 6  
can be connected to the radio: CDC  
Robert Bosch Str. 200  
A 06, CDC A 08, CDC A 072, IDC A 09  
and CDC A 02.  
D-31139 Hildesheim, Germany  
The CD changers CDC A 5 and CDC  
A 071 can also be connected if you use  
Road safety  
Road safety has priority. Only op-  
erate your car radio if road and traf-  
fic conditions allow. Familiarise your-  
self with the unit before setting off on  
your journey.  
an adapter cable (Blaupunkt no.: 7 607  
889 093).  
The Blaupunkt CDC A08 CD changer  
is included with the Carolina DJ52.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time. For this reason, set the  
volume of your car radio at a suita-  
ble level.  
International telephone  
information  
Should you have any questions about  
how to use the car radio or require any  
further information, please call us!  
The telephone information service num-  
bers are printed on the last page of this  
manual.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FLIP/RELEASE PANEL  
Press the  
button 1.  
Flip/release panel  
This unlatches the flip/release panel.  
Theft protection  
First pull the flip/release panel  
straight and then to the left out of  
the unit.  
Your car radio is fitted with a flip/release  
panel to guard against theft. Without this  
panel, the unit is worthless to the thief.  
Protect your unit from theft by taking the  
flip/release panel with you every time  
you leave the car. Do not leave the panel  
behind in the car, even if it is out of sight.  
The constructive design of the panel  
makes for simple handling.  
After removing the flip/release pan-  
el, the unit switches itself off.  
All the current settings are saved.  
If there is a CD in the unit, it re-  
mains there.  
Attaching the flip/release panel  
Note:  
Slide the flip/release panel from left  
Do not drop the flip/release panel.  
to right into the unit guide.  
Do not expose the flip/release pan-  
el to direct sunshine or other sourc-  
es of heat.  
Press the left side of the panel into  
the unit until it slots into place.  
Keep the flip/release panel in the  
case provided.  
Avoid touching the contacts of the  
flip/release panel. Please clean it  
when necessary with some white  
spirit on a lint-free cloth.  
Removing the flip/release panel  
Note:  
Do not press against the display  
while attaching the flip/release pan-  
el.  
1
If the device was switched on when the  
panel was removed, it will switch itself  
back on automatically with the last set-  
tings (radio, Cassette, CD-changer or  
AUX) as soon as the panel is replaced.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING ON/OFF  
Switching on/off  
There are various ways of switching the  
car radio on and off, as described be-  
low.  
Switching on by means of cassette  
insertion  
If there is no cassette in the deck when  
the device is switched off,  
press the  
The flip-release panel opens.  
button, 9.  
Switching on/off using the ignition  
If the car radio is correctly connected to  
the ignition and has not been switched  
off using the button 3, it is switched  
on/off simultaneously with the ignition.  
Insert the cassette with the open  
side to the right gently into the  
drive until you can sense some re-  
sistance.  
You can also switch on your car radio  
when the vehicle ignition is off.  
The cassette is automatically drawn into  
the drive.  
As the cassette is drawn in, it must nei-  
ther be held back nor assisted.  
To do so, press the button 3.  
Note:  
To protect the vehicle battery, the  
unit switches off automatically after  
one hour.  
Close the panel with gentle pres-  
sure until you feel it engage.  
The device switches on. Cassette play  
starts.  
Switching on/off using the flip/  
release panel  
Remove the flip/release panel.  
The unit switches itself off.  
Replace the flip/release panel once  
more.  
The device switches on. The most re-  
cent setting (radio, Cassette, CD-chang-  
er or AUX) is restored.  
Switching on/off using the button  
3
To switch the unit on, press the but-  
ton 3.  
To switch the unit off, hold the but-  
ton 3 down for more than two  
seconds.  
The car radio is now switched off.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOLUME ADJUSTMENT  
Mute setting  
Volume adjustment  
This feature enables you to lower the  
system volume instantaneously (mute).  
The system volume can be adjusted in  
steps from 0 (off) to 66 (maximum).  
Briefly press button 3.  
MUTEappears on the display.  
To raise the system volume, turn  
the volume control 2 to the right.  
To lower the system volume, turn  
the volume control 2 to the left.  
Activating the mute setting  
The unit's mute level is adjustable.  
Press the MENU button 8.  
Setting the switch-on volume  
You can set the volume at which you  
wish the car radio to play when switched  
on.  
Press the or button : repeat-  
edly until MUTE LEVELappears  
on the display.  
Press the MENU button 8.  
Use the  
mute level.  
buttons : to set the  
Press the or button : repeat-  
edly until ON VOLUMEappears  
on the display.  
When you have completed the set-  
ting, press either the MENU button  
8 or OK ; twice.  
Use the  
buttons : to set the  
switch-on volume.  
Telephone Audio/Navigation  
Audio  
If you select the LAST VOLsetting,  
the volume played before the unit was  
last switched off will be reactivated.  
If your car radio is connected to a mo-  
bile telephone or navigation system,  
then when the telephone is taken off  
the hook, or when the navigation sys-  
tem is speaking, the car radio is muted.  
The telephone conversation or speech  
output are reproduced via the car radio  
speakers. This requires the mobile tel-  
ephone or navigation system to be co-  
nnected to the car radio as described  
n the installation instructions. For this  
you will need the cable with the follow-  
ing Blaupunkt number: 7 607 001 503.  
Note:  
To protect your hearing, the power-  
on volume is limited to a value of  
38. If the volume level was higher  
when the unit was switched off and  
the LAST VOLsetting is selected,  
the volume will be reset to 38”  
when the unit is switched on again.  
When you have finished making your  
changes,  
press the MENU button 8 or OK  
; twice.  
Your Blaupunkt dealer can tell you which  
navigation systems can be used with  
your car radio.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOLUME ADJUSTMENT  
If a traffic announcement is received  
during a telephone call, or while the  
navigation system is speaking, the traf-  
fic announcement is not reproduced  
until the call or the speech output has  
finished.  
Setting the volume for the  
confirmation tone  
If you hold down a button for longer than  
two seconds when using certain func-  
tions, e.g. storing a station on a station  
button, a confirmation tone (beep)  
sounds. The volume of this beep is ad-  
justable.  
If a call is received or if the navigation  
system begins speaking during a traffic  
announcement, the announcement is  
reproduced. The telephone call or  
speech output can be heard when the  
traffic announcement has finished.  
Press the MENU button 8.  
Press the or button : repeat-  
edly until BEEPappears on the  
display.  
The volume at which navigation output  
or telephone calls start is adjusted as  
follows:  
Adjust the volume using the and  
buttons :. 0means the beep  
is off, 9means maximum beep  
volume.  
Press the MENU button 8.  
Press the or button : until  
TEL/NAVI VOLappears in the  
display.  
When you have completed the set-  
ting, press either the MENU button  
8 or OK ;.  
Set the desired volume with the  
buttons :.  
When the setting process is com-  
plete, press the MENU button 8  
or OK ; twice.  
Note:  
You can adjust the volume level of tele-  
phone calls and of speech output as  
they are made with the volume control  
2.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Switching REG function on/off  
Radio mode  
To use the RDS functionsAF and REG,  
This unit is equipped with an RDS radio  
receiver. Many of the receivable FM sta-  
tions transmit a signal that not only car-  
ries the programme but also additional  
information such as the station name  
and programme type (PTY).  
press the MENU button 8.  
Press the or button : repeat-  
edly until REGappears on the  
display. OFFor ONwill be dis-  
played alongside REG.  
The station name appears on the dis-  
play as soon as it is received.  
To switch REG on or off, press the  
or button :.  
Switching to radio mode  
If you are in cassette, CD changer or  
AUX mode,  
Press the MENU button 8 or OK  
;.  
Switching the RDS convenience  
function on/off  
press the BND/TS button 5  
or  
To use the RDS functions AF and  
REG, press the RDS button 4.  
keep pressing the SRC button @  
until RADIOappears in the dis-  
play.  
The RDS convenience functions are  
active when RDS lights up on the dis-  
play with a symbol. When the RDS con-  
venience functions are activated, REG  
ONor REG OFFappears briefly on  
the display.  
RDS function (AF, REG)  
The RDS functionsAF (Alternative Fre-  
quency) and REG (Regional) extend  
your radio's range of functions.  
AF: If this RDS function is activat-  
ed, the unit automatically tunes into  
the best receivable frequency for  
the station that is currently set.  
Selecting the waveband/  
memory  
This unit can receive programmes  
broadcast over the FM as well as MW  
and LW (AM) waveband. There are  
three preset memory levels for the FM  
range and one each for the MW and  
LW ranges.  
REG: Some radio stations set  
aside some of their broadcasting  
time for regional programmes that  
provide different regional content.  
With the REG function, your car ra-  
dio is prevented from switching to  
alternative frequencies with a dif-  
ferent regional content.  
Six stations can be stored on each  
memory level.  
In order to switch between memory  
levels or wavebands, briefly press  
the BND/TS button 5.  
Note:  
REG has to be specially activated/  
deactivated in the unit's menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Tuning into a station  
There are various methods available for  
tuning into a station.  
Setting the sensitivity of the  
station search mode  
You can choose whether you wish to  
preset only strong or also poor-recep-  
tion stations.  
Automatic station search mode  
Press the or button :.  
The unit tunes into the next receivable  
station.  
Press the MENU button 8.  
Press the or button : repeat-  
edly until SENSappears on the  
display.  
Tuning into stations manually  
You can also tune into stations manual-  
ly.  
Press the button :.  
The display shows the currently set val-  
ue for sensitivity. SENS HI6denotes  
maximum sensitivity. SENS LO1is the  
minimum.  
Press either the or buttons :.  
Note:  
You can only tune into stations  
manually if the RDS function has  
first been deactivated.  
Use the  
buttons : to set the  
desired degree of sensitivity.  
When you have completed the set-  
tings, press the MENU button 8  
or the OK buttons ;.  
Browsing through broadcasting  
networks (only FM)  
If a radio station provides several pro-  
grammes, you have the option of brows-  
ing through its so-called broadcasting  
network.  
Storing stations  
Storing stations manually  
Select the required FM memory  
level, FM1, FM2, FMT or either  
waveband MW or LW.  
Press the or button : to  
move to the next station on the  
broadcasting network.  
Tune into the desired station.  
Note:  
Hold down one of the preset sta-  
tion buttons 1 - 6 > on which you  
wish to store the station for more  
than two seconds.  
If you want to use this feature, the  
RDS function must first be activat-  
ed.  
You will then only be able to switch to  
stations that you have received once  
already. To do so, use the Scan or Trav-  
elstore function.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Ending SCAN, continuing to listen  
to a station  
Storing stations automatically  
(Travelstore)  
Press the OK button ;.  
The scanning process is completed, the  
station last scanned remains active.  
You can store the six stations with the  
strongest reception in the region auto-  
matically (only FM). The stations are  
stored in the FMT memory.  
Setting the scanning time  
Note:  
Press the MENU button 8.  
Stations that were previously  
stored in this memory are deleted  
in the process.  
Press the or button : repeat-  
edly until SCANTIMEappears on  
the display.  
Hold down the BND / TS button 5  
for more than two seconds.  
Use the  
buttons : to set the  
desired scanning time.  
The automatic station-storing procedure  
begins. TRAVEL-STOREappears on  
the display. Once the process is com-  
pleted, the station stored in FMT mem-  
ory location 1 is played.  
Once the setting has been com-  
pleted, press the MENU button 8  
or OK ; twice.  
Note:  
Listening to preset stations  
The set scanning time also applies  
to scanning in the CD and CD  
changer mode.  
Select the memory or frequency  
range.  
Hold down the preset station but-  
ton 1 - 6 > of the desired station.  
Programme type (PTY)  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme they are  
broadcasting. This information can be  
received and displayed by your car ra-  
dio.  
Scanning receivable stations  
(SCAN)  
You can briefly listen in to all receivable  
stations. The scanning time can be set  
in the menu at between 5 and 30 sec-  
onds.  
For example, the programme types can  
be:  
Starting SCAN  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
Hold down the OK button ; for  
more than two seconds.  
CLASSICS  
The scanning process begins. SCAN”  
appears briefly on the display, followed  
by the current station name or frequen-  
cy, which flashes.  
You can use the PTY function to select  
stations of a particular programme type.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
PTY-EON  
Selecting programme type and  
starting a search  
When the programme type has been  
selected and the search started, the car  
radio switches from the current station  
to a station featuring the selected pro-  
gramme type.  
Press the or button :.  
The current programme type appears  
on the display.  
If you would like to select a differ-  
ent programme type, you can  
change to another programme time  
within the time the programme is  
displayed by pressing the or  
button :.  
Note:  
If no station with the selected pro-  
gramme type is located, a beep  
sounds and NO PTYappears  
briefly on the display. The unit  
tunes into the station last received  
once again.  
Or  
Press one of the buttons 1 - 6 >  
to select the programme type  
stored on that particular button.  
If the set station or another station  
in the broadcasting network trans-  
mits the selected programme type  
at a later time, the car radio auto-  
matically switches from the current  
station - or from Cassette or CD  
changer mode - to the station fea-  
turing the desired programme type.  
The selected programme type will ap-  
pear briefly on the display.  
Press the or button : to start  
the search.  
The next station corresponding to your  
selected programme type will be tuned  
into.  
Switching PTY on/off  
Press the MENU button 8.  
Storing the programme type on the  
station buttons  
Press the or button : repeat-  
edly until PTY ONor PTY OFF”  
appears on the display.  
Use the or button : to select  
a programme type.  
Press the or button : to  
switch PTY on (ON) or off (OFF).  
Hold down the desired station but-  
ton 1 - 6 > for more than two sec-  
onds.  
When PTY is activated, PTY lights up  
on the display.  
The programme type is now stored on  
the selected station button 1 - 6 >.  
Press the MENU button 8 or OK  
;.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Optimising radio reception  
Selecting running text display  
Some radio stations use the RDS sig-  
nal to broadcast advertising or other in-  
formation instead of their station name.  
Such running textsappear on the dis-  
play. You can either allow or block the  
display of running text.  
High-frequency cut-off feature  
(HICUT)  
The HiCut function improves the sound  
during poor radio reception (only FM).  
If interference occurs, the treble is au-  
tomatically reduced and thus also the  
interference level.  
Press the RDS button 4 until  
NAME FIXappears on the dis-  
play.  
Switching HiCut on/off  
Press the MENU button 8.  
In order to reactivate the display of  
running texts, hold down the RDS  
button 4 until NAME VARap-  
pears on the display.  
Press the or button :  
repeatedly until HICUTappears  
on the display.  
Use the or button : to select  
Setting the display  
HICUT.  
In radio mode you can choose between  
the continuous display of the time or the  
continuous display of the station name/  
frequency.  
HICUT 0denotes no treble reduction,  
HICUT 1the greatest automatic reduc-  
tion of the treble and the interference  
level.  
Hold down the  
/ DIS button 7  
Press the MENU button 8 or  
OK ;.  
until the desired feature appears on  
the display.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRAFFIC INFORMATION  
Traffic information  
Your car radio is equipped with an RDS-  
EON reception system. EON stands for  
Enhanced Other Network.  
Setting the traffic  
announcement volume  
Press the MENU button 8.  
Press the or button : repeat-  
edly until TA VOLUMEappears  
on the display.  
When a traffic announcement (TA) is  
broadcast, your unit will automatically  
switch, within a broadcasting network,  
from a station which does not transmit  
traffic information to one that does.  
Use the or button : to set the  
desired volume.  
Once the setting is completed,  
press the MENU button 8 or OK  
; twice.  
The unit reverts to the programme pre-  
viously listened to when the traffic an-  
nouncement is over.  
Note:  
Switching traffic information  
priority on/off  
You can also adjust the volume  
during a traffic announcement for  
its duration by using the volume  
control 2.  
Press the TRAF button ?.  
Priority for traffic announcements is ac-  
tivated when the traffic-jam symbol lights  
up on the display.  
Note:  
You can also adjust the tone and  
volume balance for traffic an-  
nouncements. Please see the  
Tone and Volume Balancesec-  
tion.  
Note:  
You will hear a warning tone,  
if you leave the reception area of a  
traffic information station to which  
you are currently tuned in;  
if you leave the reception area of a  
traffic information station when you  
are listening to a CD and the sub-  
sequent automatic search cannot  
locate a new traffic information sta-  
tion;  
if you retune the radio from a traffic  
information station to one that does  
not broadcast traffic information.  
Either deactivate the priority for traffic  
information or switch to a station which  
broadcasts traffic information.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASSETTE MODE  
Changing Direction of Play  
Cassette Operation  
To change between SIDEAand SIDE B  
Cassette Play  
If there is no cassette in the device  
Press button 2  
>.  
Note:  
Press the  
button 9.  
At the end of the tape, the direction  
of play is automatically reversed  
(auto-reverse).  
The flip-release panel opens.  
Insert the cassette into the cassette  
slot with the open side to the right.  
Skipping Tracks (S-CPS)  
To skip to the next or a later track  
Close the control unit.  
The cassette starts playing with the side  
that is facing upwards.  
Press the button : one or more  
times.  
If there is already a cassette in the  
CPS FFand the number of tracks to  
be skipped appear in the display. The  
tape fast forwards to the next track or  
the chosen later track.  
device  
Press the SRC button @ until  
CASSETTEappears in the dis-  
play.  
To skip track backwards  
The cassette is played in whichever di-  
rection was last selected.  
Press the button : one or more  
times.  
Cassette Ejection  
CPS FRand the number of tracks to  
be skipped appear in the display. The  
tape is rewound to the start of the  
present track or the desired earlier track.  
Press the  
The flip-release panel opens and the  
cassette is ejected.  
button 9.  
Playing a Track Repeatedly  
Remove the cassette and close the  
release panel  
Press button 4 RPT >.  
or  
The present track is repeated. RPT  
shows in the display. While the tape is  
being rewound after the end of the track,  
REPEATTRCKappears in the display.  
Insert a new cassette.  
To stop repeating the track  
Press button 4 RPT > again.  
Play continues as normal. RPT disap-  
pears from the display.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASSETTE MODE  
Stopping fast winding  
Press the OK button ;.  
Play continues.  
Sampling All the Tracks on a  
Cassette (SCAN)  
Hold down the OK button ; for  
longer than two seconds.  
Note:  
CAS SCANappears in the display.  
Samples from all the tracks on the tape  
are played in ascending order.  
While the tape is being fast wound,  
the last radio station tuned in can  
be listened to. This requires the  
Radio monitorfunction to be  
switched on.  
To halt the scan  
Press the OK button ; a second  
time.  
Pausing During Play  
To interrupt tape play  
Press button 1 >.  
Play is interrupted and PAUSEap-  
pears in the display.  
The track that is currently being sam-  
pled will continue playing.  
Note:  
The duration of samples can be  
adjusted. Refer to the section on  
Setting Sample Timeunder Ra-  
dio Operation.  
Press button 1 > again to  
resume play.  
To use the S-CPS, RPT and SCAN  
functions, there must be a pause of  
at least three seconds between the  
tracks on the cassette.  
Switching the Radio Monitor  
On / off  
Note:  
The radiomonitor can only be set if  
Fast Winding  
a cassette is being played.  
Fast forward  
Press the MENU button 8.  
Press the button :.  
FORWARDappears in the display.  
Press the or button : until  
RM ONor RM OFFappears in  
the display.  
Fast rewind  
Press the or button : to  
Press the button :.  
REWINDappears in the display.  
switch the radio monitor on or off.  
Press the MENU button 8 or OK  
;.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASSETTE MODE  
Skipping Blank Tape  
Dolby* B Noise Reduction  
You can automatically skip sections of You should switch on the Dolby func-  
blank tape that last longer than 10 sec- tion whenever you play tapes recorded  
onds. This requires the blank skip func- using the Dolby B process.  
tion to be activated.  
Press button 6  
>.  
Note:  
When the Dolby function is switched on,  
shows in the display.  
The blank skip can only be set if a  
cassette is being played.  
*Noise reduction system manufactured un-  
der licence from Dolby Laboratories. The  
word Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
Switching Blank Skip On / Off  
Press the MENU button 8.  
Press the or button : until  
BLANK SKIPappears in the dis-  
play.  
Press the or button : to  
switch the blank skip function on or  
off.  
Press the MENU button 8 or OK  
; twice.  
Selecting Tape Type  
If you are playing a Metalor CrO2”  
tape, you should set the tape type se-  
lector to MTL ON.  
To select the tape type  
Press button 3 MTL >.  
Either MTL ONor MTL OFFwill ap-  
pear briefly in the display.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
CD changer mode  
Fast search (audible)  
For a fast search backwards or forwards  
Note:  
Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions accompanying  
your CD changer.  
keep the  
buttons : pressed  
until the fast search backwards or  
forwards begins.  
Changing the display  
To alter the display between track  
number and playing time or track  
number and time or track number  
Starting CD changer mode  
Press the SRC button @ repeat-  
edly until CHANGERappears on  
the display.  
and CD number, press the  
7 button once or several times for  
more than two seconds until the  
desired elements appear on the  
display.  
/ DIS  
Playback begins with the first CD the  
CD changer recognises.  
Selecting a CD  
Repeating individual tracks or  
whole CDs (REPEAT)  
To change up or down to a different  
CD, press the or button :  
once or several times.  
To repeat the current track, press  
the button 4 RPT > briefly.  
Selecting a track  
REPEATTRCKappears briefly on the  
To move up/down from one track to  
another on the current CD,  
press the or button : once or  
several times.  
display and RPT lights up.  
To repeat play of the entire CD,  
press the button 4 RPT > once  
again.  
Fast track selection  
REPEAT DISCappears briefly on the  
display and RPT lights up.  
For fast track selection backwards or  
forwards:  
Stopping REPEAT  
hold down either the or button  
: until fast track selection back-  
wards or forwards begins.  
To stop the repeat function for the  
current track or CD,  
press the button 4 RPT > repeat-  
edly until REPEAT OFFappears  
briefly on the display and RPT  
goes out.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CASSETTE MODE  
Random play (MIX)  
Scanning all tracks on all CDs  
(SCAN)  
To listen in briefly to all the tracks  
on all inserted CDs in ascending  
order, hold down the OK button ;  
for more than two seconds.  
To play the tracks on the current  
CD in random order, press the but-  
ton 5 MIX >.  
MIX CDappears briefly on the display  
and MIX lights up.  
SCANappears on the display.  
To play the tracks of all the inserted  
CDs in random order, press the  
button 5 MIX > once again.  
Stopping SCAN  
To stop scanning, press the OK  
button ; briefly.  
MIX ALLappears briefly on the dis-  
play and MIX lights up.  
The track currently being scanned then  
continues play.  
Note:  
In the case of CD changers CDC  
A 08 and IDC A 09, all CDs in the  
changer are randomly selected. All  
other changers first play all the  
tracks on a CD in random selection  
before moving to the next CD in  
the changer.  
Note:  
You can set the scanning time as  
required. Please see the section  
Setting the scanning timein the  
Radio modechapter.  
Interrupting Play (PAUSE)  
Press the button 1 >.  
PAUSEappears on the display.  
Stopping MIX  
Press the button 5 MIX > until  
MIX OFFappears briefly on the  
display and MIX goes out.  
Ending Pause  
Press the button 1 > during the  
pause.  
Play then resumes.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK - TIME  
Press the  
buttons : to switch  
between the 12 and 24-hour mode.  
CLOCK - Time  
Briefly displaying the time  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Press the  
/ DIS 7 button briefly  
to display the time.  
Setting the time  
Viewing the time with the car  
radio switched off and the  
ignition on  
Setting the time manually  
To set the time manually, press the  
MENU button 8.  
To view the time when the car radio  
is switched off and the ignition is  
switched on, press the MENU but-  
ton 8.  
Press the or button : repeat-  
edly until CLOCKSETappears on  
the display.  
MENUappears on the display.  
Press the button :.  
The time appears on the display. The  
minutes flash and can now be set.  
Press the or button : repeat-  
edly until CLK DISP OFFor CLK  
DISP ONappears on the display.  
Set the minutes using the or  
buttons :.  
Press the  
button : to switch  
between ON and OFF.  
Once the minutes have been set,  
press the button :. The hours  
now flash.  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Set the hours using the or but-  
tons :.  
Briefly viewing the time when  
the car radio is switched off  
In order to view the time when the car  
radio is switched off,  
Press the MENU button 8 or OK  
; twice, once you have complet-  
ed the setting.  
press the button  
The time appears on the display for  
eight seconds.  
/ DIS 7.  
Selecting the 12/24-hour clock  
mode  
Press the MENU button 8.  
MENUappears on the display.  
Press the or button : repeat-  
edly until 24 H MODEor 12 H  
MODEappears on the display.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TONE AND VOLUME BALANCE  
Setting the volume distribution  
left/right (balance)  
Tone and volume balance  
You can adjust the sound settings for  
each source separately (radio, Cas-  
sette, CD changer, AUX and traffic an-  
nouncement). The volume distribution  
settings apply to all the audio sources.  
To set the volume distribution left/  
right (balance), press the AUDIO  
= button.  
BASSappears on the display.  
Note:  
Press the button : repeatedly  
until BALANCEappears on the  
display.  
You can only adjust the audio set-  
tings for traffic announcements  
whilst a traffic announcement is ac-  
tually being played.  
Press the or button : to set  
the volume distribution left/right.  
Adjusting the bass  
Press the AUDIO = button once  
Press the AUDIO = button.  
BASSappears on the display.  
you have completed the setting.  
Setting the volume distribution  
front/rear (fader)  
Press the or button : to set  
the bass.  
To set the volume distribution front/  
rear (fader), press the AUDIO =  
button.  
Press the AUDIO = button once  
you have completed the setting.  
BASSappears on the display.  
Adjusting the treble  
Press the button : repeatedly  
until FADERappears on the dis-  
play.  
Press the AUDIO = button.  
BASSappears on the display.  
Press the button : repeatedly  
until TREBLEappears on the dis-  
play.  
Press the or button : to set  
the volume distribution front/rear.  
Press the AUDIO = button once  
Press the or button : to set  
you have completed the setting.  
the treble.  
Press the AUDIO = button once  
you have completed the setting.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
X-BASS  
X-BASS  
LEVEL INDICATOR  
Setting the level indicator  
X-Bass means increased bass at low The spectrometer (level display) briefly  
volumes.  
provides a symbolic display of the vol-  
ume and the audio control settings  
whilst you are adjusting them.  
Note:  
X-BASS can be adjusted separate-  
ly for each audio source (radio,  
Cassette, CD-changer and AUX).  
When settings are not being made, the  
spectrometer indicates the original lev-  
el of the car radio.  
You can also set the type of spectromet-  
er on your menu.  
Setting X-BASS boost  
The X-BASS boost can be increased in  
steps from 1 to 3.  
There are two types available.  
X-BASS-OFFmeans the function is  
switched off.  
Selecting a spectrometer type  
Press the MENU button 8.  
MENUappears on the display.  
Press the X-BASS button <  
Press the or button : until  
the desired setting appears in the  
display.  
Press the or button : repeat-  
edly until EQ DISPLAYappears  
on the display.  
When setting is complete  
Press the X-BASS button <.  
Press the or button : to  
choose between displaying  
SPECTRUM 1and SPEC-  
TRUM2or EQ DISP OFFset the  
volume distribution left/right.  
Press the MENU button 8 or OK  
; twice, once you have complet-  
ed the setting.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL AUDIO SOURCES  
External audio sources  
TECHNICAL DATA  
Technical data  
In place of the CD changer it is also  
possible to connect other external au-  
dio sources to the line output. These  
sources can include a portable CD play-  
er, MiniDisc player or MP3 player.  
The AUX output has to be switched on  
in the install menu.  
To connect up an external audio source,  
you will need an adapter cable (Blau-  
punkt no.: 7 607 897 093), obtainable  
from any authorised Blaupunkt dealer.  
Amplifier  
Output power:  
4 x 25 watts sine  
in accordance  
with DIN 45 324 at  
14.4V,  
4 x 45 watts max.  
power  
Tuner  
Frequency ranges:  
FM:  
MW:  
LW:  
87.5 - 108 MHz  
531 - 1 602 kHz  
153 - 279 kHz  
Switching the AUX input on/off  
Press the MENU button 8.  
MENUappears on the display.  
FM transmission range:  
35 - 16 000 Hz  
Press the or button : repeat-  
edly until AUX-IN-1 OFFor AUX-  
IN-1 ONappears on the display.  
Cassette  
Transmission range:  
Press the or button : to  
switch AUX on or off.  
30 - 18 000 Hz  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Pre-amp output  
4 channels:  
3 V  
Note:  
When the AUX input is switched on, it  
can be selected using the SRC button  
@.  
Input sensitivity:  
AUX 1 input:  
2 V / 6 k  
Tel-/Navi input:  
10 V / 1 kΩ  
Subject to change!  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service-Nummern / Service numbers / Numéros du service après-  
vente / Numeri del servizio di assistenza / Servicenummers /  
Telefonnummer för service / Números de servicio / Número de  
serviço / Servicenumre  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
01-576 9473  
01-4598830  
02-369 6464  
40 2085  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0800-550 6550  
(IRL) 01-4149400  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherland  
Norway  
Portugal  
Spain  
(NL)  
023-565 6348  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
(N)  
(P)  
(E)  
(S)  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ)  
02-6130 0441  
01-333 9575  
0800-118922  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
Poland  
(PL)  
Turkey  
USA  
(TR)  
0212-3350677  
0212-3460040  
708-6817188  
(USA) 800-2662528  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
01/02  
K7/VKD 8 622 403 154  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Switch F5L009 User Manual
Black Decker Iron BDCMTS User Manual
Blaupunkt Satellite Radio SR04 User Manual
Blue Rhino Gas Grill PG2620 User Manual
Bosch Appliances Home Security System LTC 2605 91 User Manual
Bosch Appliances Washer WFMC3301UC User Manual
Boston Acoustics Portable Radio AM FM Radio User Manual
Bushnell GPS Receiver 360300 User Manual
Chicago Electric Webcam 93765 User Manual
Chicago Electric Work Light 93255 User Manual