Operating Instructions
ACD 9430
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Description
1 ON/OFF
5 MIX•lo•m button
9 Display
Switch on the set by turning knob 1.
CD:
Use this button to play the CD titles in
an arbitrary order.
Radio:
Button to shift between the normal and
high-sensitivity manual station seek
mode, and mono switch.
: Preset buttons
2 AUD button (sound control/broader
interior sound impression)
Storing a station:
Keep button depressed during radio
operation until the station becomes
audible again.
BAS – Adjustment of the low frequen-
cies via buttons </> 7.
TRE – Adjustment of the high frequen-
Recalling a station:
cies via buttons </> 7.
Press button briefly.
BAL – Adjustment of the left/right volu-
me via buttons </> 7.
FAD – Adjustment of the front/rear vo-
6
• SRC button (Source)
To shift between the individual audio
sources, e.g. CD ♦ Radio ♦ CD.
lume via buttons </> 7.
By pressing the
• SRC button 6 for
more than than 3 seconds, the CD is
ejected.
3 FM•T button (Frequency Modulation)
FM button
This button is used for shifting between
the different individual FM storage le-
vels and T (Travelstore).
7 < > rocker switch
Radio:
Automatic station selection
CD:
Skipping to next/previous title
Pressing the rocker switch < > longer
than 1 sec. activates fast forward (cue)
or fast reverse (review).
4 ARI button
Use this button to activate the ARI func-
tion.
8 CD slot
Insert the CD with the label side sho-
wing to the top.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important information
Traffic Messages (ARI) ......................... 17
Switching Traffic Messages On and Off 17
Acoustic Alarm ...................................... 17
ARI during CD Operation ...................... 17
Automatic Start of the Station Seek
Front Panel Description............... 12
What you need to know!
Before starting to use your new car radio you
shouldcarefullyreadthroughtheinformation
on “Traffic safety” and “Anti-theft coding”.
Important information .................. 13
What you need to know! ....................... 13
Traffic safety ......................................... 13
QuickOut ............................................... 13
Installation/connection .......................... 14
Operation .............................................. 18
Traffic safety
CD Section .................................... 18
Traffic safety has always priority. Use your
car radio in such a manner that you are
always able to cope with and react to the
prevailing traffic situation at any given time.
Remember, even at 50 km/h you are still
moving at a speed of 14 m per seconds.
It is also very important that you are able to
hear, and react to, acoustic warning signals
around you, for example from the police or
the firebrigade.
Anti-theft coding .......................... 14
Inserting the Disc .................................. 18
Ejecting the Disc ................................... 18
Title Selection/Cueing and Reviewing .. 18
Mix Function.......................................... 18
Changing the Audio Source with SRC .. 18
Wrong code number entered ................ 14
Switching the code system on .............. 14
Restart following interruption of power
supply.................................................... 15
Switching the code system off .............. 15
Programming with DSC ............... 19
Amplifier Section.......................... 15
Appendix....................................... 19
ON/OFF ................................................ 15
Bass and Treble Control ....................... 15
Balance and Fader Control ................... 16
Technical Data ...................................... 19
What To Do If Your Car Stereo Needs
Service? ................................................ 19
Therefore, adjust the volume reasonably.
Radio Section ............................... 16
QuickOut
Selecting a Station ................................ 16
Tuning in a Station Automatically.......... 16
Manual Tuning ...................................... 16
Adjusting the Station Seek Sensitivity... 16
Mono/Stereo Operation......................... 16
Memorizing a Station ............................ 17
Automatically Storing the Strongest
Using the QuickOut handle you can easily
pull your radio out of the installation compart-
ment to take it along. The preset stations
remain stored for a longer time.
To take out the radio.
•
press knob (a), take the handle (b) and
pull the unit out.
Stations ................................................. 17
Activating a Stored Station.................... 17
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-theft coding
To listen to the radio or cassette again,
The car radio comes standard with the code
system deactivated.
If the power supply to the radio is interrupted
while the code system is switched on, you
need to know the right code number.
The radio will operate again as soon as you
have entered the right code number.
If you lose your radio passport and have
forgotten your code number, you will not be
able to restart the set after the power supply
has been interrupted. In this case, your radio
can only be reset in our central customer
service workshop or in one of our service
agencies abroad.
•
insert the set into the compartment until
it stops and move the handle back to
the front panel.
If the anti-theft coding system is on while the
power supply to the unit is interrupted (e.g.
theft,disconnectingthecarbattery),thesetis
electronically blocked. Then it may only be
used again after the appropriate code num-
ber has been entered (see car radio pass-
port).
If the coding system is off, your set will be
ready for operation.
If the coding system is on, proceed as des-
cribed under “Restart following interruption
of power supply”.
Wrong code number entered
Installation/connection
It should not be possible for thieves to ascer-
tain the code number by trial-and-error. This
is why the set will be blocked for a certain
period of time, if an incorrect code number is
entered. In this case, “- - -” will appear in the
display.
This waiting time is 10 seconds after the first
three attempts, and 1 hour following subse-
quent attempts.
The code system can only be switched on
and off, if the radio is connected to perma-
nent power.
If you like to install your new car radio by
yourself or add other audio components to
the existing ones, then please read carefully
the enclosed instructions on installation and
connection.
Do not connect the loudspeaker outputs to
ground!
Only use the accessory and replacement
parts approved by Blaupunkt.
Switching the code system on
Precondition:
The radio must be connected to permanent
power.
In order to switch the code system on:
•
•
Turn the radio off.
Hold down the preset buttons 1 and 4
After 19 unsuccessful attempts, “OFF” will
appear in the display and the set can no
longer be restarted.
simultaneously.
•
Turn the radio on.
“Cod” briefly appears before the radio
begins to operate.
Note:
Keep you car radio passport with the code
number in a safe place in order to avoid
“unauthorized access” to your car radio.
•
Release preset buttons 1 and 4.
The code system is on.
“Cod” will be briefly displayed each time the
radio is turned on.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier Section
Restart following interruption of
power supply
Now it is essential to enter the correct code
after the waiting period has elapsed (Cod in
the display).
If the radio is turned off before the waiting
period has elapsed, then the waiting period
restarts as soon as the radio is turned on
again.
ON/OFF
To switch on the set:
(Code system switched on)
•
Turn button 1 clockwise.
To switch off the set:
Turn button 1 counterclockwise.
•
•
•
Switch on the set.
“Cod” will appear in the display.
•
Briefly press preset button 1, “000” will
appear in the display.
Bass and Treble Control
Enter the code number given in the
Blaupunkt car radio passport:
Switching the code system off
Bass Control
To adjust the low frequencies:
•
•
Turn off the radio.
Preset button 1 only allows to choose
“0” or “1”. The first “0” will not be dis-
played.
Example: the code number is 0521.
- Press preset button 1 until “000” ap-
pears in the display.
- Press preset button 2 five times,
“500” appears in the display.
- Press preset button 3 twice, “520”
appears in the display.
- Press preset button 4 once, “521”
appears in the display.
•
•
Press the AUD button 2.
Display 9 gives you bas plus a num-
ber between -7 and +7.
Simultaneously press preset buttons 1
and 4 and hold them down.
•
•
Turn the set on.
“Cod” will appear in the display.
Press rocker switch </> 7 on the right
to boost the bass frequencies or on the
left for bass reduction. The number on
the display 9 changes between -7 and
+7.
Enter the code number given in the
Blaupunkt car radio passport and con-
firm: See example “Restart following
interruption …”.
The code system is now deactivated.
Treble Control
To adjust the high frequencies:
•
Press the AUD button 2 until tre and a
number between -7 and +7 appears on
the display.
•
To confirm the code number:
Press the upper part of the rocker
switch
.
•
Press rocker switch </> 7 on the right
to boost the high frequencies or on the
left for treble reduction. The number on
display 9 changes between -7 and +7.
Your car radio is now ready for operation.
If three dashes appear again in the display,
you have entered a wrong code number.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Section
Balance and Fader Control
carried out quickly in the corresponding
direction.
Selecting a Station
Balance control
To balance the sound level left/right:
With your car radio you can select stations
from the FM (ultra-short wave) and FM-Tra-
velstore level.
Manual Tuning
•
Press the AUD button 2 until bal is
shown on the display.
To manually tune in a station,
Press rocker switch </> 7 on the left
or right to adjust the sound impression
according to your personal preferences.
Display 9 gives you a number bet-
ween -9 and +9.
To select FM,
•
press the lo•m button 5 until “m” lights
up on display 9 f.
•
press the FM•T button 3 briefly. “FM”
lights up on display 9 a.
Youcannowmanuallysearchforthedesired
stations via the </> buttons 7.
To select FM-Travelstore,
Adjusting the Station Seek
Sensitivity
•
press the FM•T button 3 briefly until
“FM•T” is shown on display 9 b.
For more information on this function
see chapter “Automatically Storing the
Strongest Stations”.
Fader control
To balance the front/rear sound level:
With this set you can modify the automatic
station seek sensitivity in all wavebands.
If you want to search for strong stations only
(reduced sensitivity):
•
Press the AUD button 2 until fad is
shown on the display.
Press rocker switch </> 7 on the left
or right to adjust the sound impression
according to your personal preferences.
Display 9 gives you a number bet-
ween -9 and +9.
Tuning in a Station Automatical-
ly
•
Press the lo button 5 until “lo” lights
up on display 9 e.
Tuning in the following station
If you also want to search for weaker stations
(increased sensitivity):
•
Press the </> rocker switch 7 on the
right. The car stereo automatically
starts searching for the next station.
•
Press the lo button 5 once again; the
“lo” indication on display 9 e goes out.
Note:
If the rocker switch < > is kept depressed (on
the left or right), the set quickly advances to
the final values (+7/+9 or -7/-9) or to the “0”
position.
Tuning in the previous station
Mono/Stereo Operation
•
Press the </> rocker switch 7 on the
left. The car stereo automatically starts
searching for the previous station.
If the </> rocker switch 7 is kept de-
pressed on the right or the left, the sta-
tion seek operation continues to be
If the lo•m button 5 is pressed longer than
2 secs. but less than 8 secs., the set swit-
ches over to mono and the stereo symbol (h)
goes off.
If the lo•m button 5 is pressed longer than
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2 secs. but less than 8 secs., the set swit- sorted according to their signal strength. The “SK” indication on display 9 g (“SK” stands
chesovertostereoandthestereo-symbol(h) strongest station is then stored on preset for the German equivalent for “station identi-
lights up in the display.
button 1, the second strongest on preset fication”).
When the car radio is switched on it is always button 2, etc. This feature is of special use
in stereo mode.
while travelling.
Switching Traffic Messages On and Off
The ARI function is switched on by pressing
the ARI button 4. Display 9 c will then give
you the “ARI” indication. When listening to a
station without the ARI identification, an au-
diblealarmtonewillbeproducedafterappro-
ximately 3 seconds.
•
Press the FM•T button 3 for at least
two seconds.
Memorizing a Station
The set searches for the strongest FM
stations and memorizes them on the
“T” storage level (Travelstore). Once
the process is finished, the car radio
automatically tunes in to the strongest
station.
YoucanmemorizetwoFMstationswitheach
of the preset buttons :. Display 9 a, b
either indicates the FM storage level (“FM”)
or the Travelstore level (“T”).
To memorize a station:
Acoustic Alarm
Tuneinthedesiredbroadcaster(seechapter
Tuning in a Station Automatically/Manual
Tuning) first. Now press one of the preset
buttons : until the radio resumes play (ap-
prox. 2 seconds). The station is now stored.
When leaving the coverage area of the tuned
in station, your car radio automatically sends
out an acoustic alarm after approximately 30
seconds. This alarm tone is also produced
when pressing a preset button with a non-
ARI station allocated to it.
If required, it is also possible to manually
storeastationontheTravelstorelevel. Ifless
than 5 stations can be received, the free
buttons are briefly represented by dashes.
Activating a Stored Station
Note:
If you tune to an FM station already stored on
the storing levels FM or Travelstore, the
coresponding storing level and the preset
button will flash in the display.
If required, the memorized stations can be
activated at a keystroke.
ARI during CD Operation
This set offers you the opportunity to listen to
a compact disk and at the same time be
prepared for incoming traffic messages.
When such a message comes in, the CD title
will be muted until the message is over.
To select this ARI preference during CD
reproduction,
•
For this, choose the FM or T storage
level and briefly
•
press the respective preset button :.
Automatically Storing the Stron-
gest Stations
Traffic Messages (ARI)
(Travelstore)
Many FM stations broadcast local traffic
messages at regular intervals. These sta-
tions can easily be detected with the ARI
system. A traffic station is identified by the
WithTravelstore, youhavetheopportunityto
automatically store the 5 strongest FM stati-
ons of your respective area and have them
•
shift to the radio mode using the SRC
button 6.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Section
•
•
Now press the ARI button 4. The ARI
indication lights up on display 9 c.
Review (Fast backward):
Inserting the Disk
•
Keep depressed the left side of the
rocker switch </> 7 for more than
than 1 second.
With this set you can play the normal stan-
dard CDs without having to use an adapter:
Then tune in to one of the traffic stati-
ons of your area.
•
•
Switch the set on.
Switch over to CD operation by either
Insert the CD (label side up) without
applying force.
Mix Function
•
inserting a disk, or - if a CD is already
inserted by
Press the Mix button 5 to listen to the titles
in an arbitrary order.
When Mix is on, the “Mix” indication lights up
on display 9 j.
The disk is automatically pulled into the unit
to reach the playing position. Once it has
been fed in, reproduction starts.
•
pressing the SRC button 6.
CD reproduction will be interrupted as soon
as a traffic message is “put through”.
When leaving the coverage area of the tuned
in traffic station, your car stereo will automa-
tically start searching for a new one.
If no ARI station is found after having scan-
ned the frequency band several times, the Never block or support the CD mechanism in
Ejecting the Disk
Changing the Audio Source with
SRC
•
To eject the disk, keep the
• SRC
button 6 depressed at least 2 sec.
You can shift between the connected audio
sources in the order CD ♦ Radio ♦ CD. To
switch over to another audio source during
CD operation,
system sends out an alarm tone.
In this case switch off the ARI function by
any way, since this would damage the set.
Title Selection/Cueing and Re-
viewing
•
pressing button 4. The alarm tone
•
press the SRC button 6.
stops.
The set changes to radio operation.
After the CD has been inserted into the set,
„Cd“ lights up on display 9. The display
indication9 ichangesto“T1”(Track1)after
approx. 5 seconds. You can skip or repeat
titles by using the </> buttons 7.
Automatic Start of the Station Seek
Operation (CD play)
Your set will also automatically start seeking
for a new traffic station when leaving the
coverageareaofthetunedintrafficprogram-
me while listening to a disk. An alarm tone is
sent out during the search operation.
Cue (Fast forward):
•
Keep depressed the right side of the
rocker switch </> 7 for more than than
2 second.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming with DSC
Appendix
The car radio’s DSC function (Direct Soft-
ware Control) allows you to adjust the seek
tuning sensitivity for FM and the volume of
ARI traffic messages.
Technical Data
Amplifier:
Output power:
4 x 8 watts acc. to DIN
45324/3.1
Adjusting the seek tuning sensitivity:
FM:
Frequency
response:
•
•
Press the lo•m 5 button longer than
8 secs. The display gives you “lo” and a
number between 1 and 3.
50 - 16 000 Hz (-3dB)
20 - 20 000 Hz (-3 dB)
Adjust the sensitivity using the rocker
CD:
Frequency
response:
switch < > 7.
^
=
1
high sensitivity
^
=
3
normal sensitivity
To store the adjustment,
press th lo•m button once again.
Preamp-Out:
Output impedance
150 Ω
•
For setting the volume of ARI traffic messa-
ges,
What to Do If Your Car Stereo
Needs Service?
•
press the ARI button 4 longer than
8 secs. The display indicates “L” and a
number between 1 and 9.
Whenever your car radio fails to operate
properly and therefore requiring repair by an
authorized service centre, please do not for-
get to take the car radio passport along with
you.
•
Use the rocker switch < > 7 to adjust
the volume of traffic messages
^
1
9
low volume
high volume
=
^
=
To store the adjustment,
press the ARI button once again.
•
Modifications reserved!
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|