FM1400 Meat Mincer
First Use Safety Recommendation
Please read through this booklet for safe and efficient use of the appliance.
We urge you read and follow all instructions, even if you are familiar with a
similar appliance.
Keep this guide handy for future reference.
FM1400
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Parts Identification
1. Motor unit
2. Mincer head with inlet chute
3. Worm
7
8
4. Blade
5. Coarse & fine disc
6. Nut
7. Tray
9
2
2a
3
5
6
8. Round pusher
9. Sausage disc
10. Locking screw
11. Sausage stuffer
12. Kebbe Attachment
4
5a
1
10
Product Features :-
1400W as locked motor power - for the toughest of meat mincing.
Stainless Steel Blades and feeder - screw provides durability and efficiency
One speed operation - for all mincing operations
Reverse speed - assists in removing all blockages during operation.
Aluminium tray - for ease of feeding
Sausage stuffer - for making sausages.
Kebbe attachment - for making Kebbes.
Using your Meat Mincer
Your Meat Mincer is intended for grinding meat and vegetables for domestic purposes only. For indoor use
only. Kindly ensure that all the packaging material has been removed from the unit. Remove any instruction,
sticker etc. Ensure that the ratings on your mincer are the same as the line voltage in your home.
Wash all the parts other than the base unit in warm sudsy water and allow to dry. Your meat mincer is not only
for grinding meat but can also be used for grinding vegetables, and making sausages..
Assembly of Mincer Head:
1. Remove the locking screw (10) by turning it in an anti-clockwise direction. With the inlet
chute vertical, insert the mincer head (2) into the hole in the motor unit.
Fig. 1
NOTE :- Ensure that the O-ring on the rear of the worm is in place.
2. Locate the plastic tab on the motor housing between in the space between the 2 circular
ribs on the Mincer head.
3. Fit the locking screw (10) & hand-tighten to lock the head in place.
Changing cutting disc
Fig. 2
1. Remove the nut (6) by rotating it in an anti-clockwise direction.
2. Remove the disc (5), blade & worm & clean if necessary.
3. Mount the blade (4) on the worm (3) with the round side facing the worm and the smooth
side in contact with the disc (Figure 1)
Fig. 3
Note : the meat will not be minced if the blade is mounted with the wrong side facing the
screw.
4. Place te required cutting disk (5) (Figure 2) into the end of the Mincer head, locating the 2
tabs on the disks into the recesses in the head.
5. Fit & hand-tighten the nut (6) (Figure 3).
Fig. 4
6. Fit the tray (7) (Figure 4) into the top of te inlet chute.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
English
How to use your Meat Mincer:
The meat mincer is intended to mince boneless meat for household use only.
1. After assembling the unit, place the mincer on a flat dry surface. Please ensure that the ventilation openings on
the base and side of the motor are not blocked.
2. Make sure that the electrical supply at your home matches the supply prescribed on the unit. Connect the power
cord into the supply socket.
3. Place the food tray on top of the filling shaft. Place a bowl or container below the metal head to collect the
minced meat flowing through the plate.
4. Please ensure that the meat is thawed thoroughly before mincing. Check the meat for bones and unwanted fat.
Clean the meat and cut into small cubes to fit the filling shaft and drop them into the food tray.
5. Switch the mincer 'ON' in the forward direction. Slowly feed the meat pieces into the filling shaft
from the food tray and push down with the food pusher (Figure 5). Do not apply excessive force
when pushing down. This could damage your mincer.
Fig. 5
NOTE : Never use your finger to push the food.
There are chances that the meat will get stuck in the worm during operation. In these times, use the
reverse speed to release the jam and revert to the forward direction again after 6~10 seconds. Do not run the
appliance for more than 15 minutes continuously. After 15 minutes of continuous use, allow the appliance to cool to
room temperature during 10 minutes before further usage. Once the task is over, switch the mincer 'OFF', switch off
the electrical supply at the socket and remove the power from the socket before disassembling.
The unit is fitted with a thermal-cut-out. If this should operate, disconnect the appliance from the electrical supply and
allow it to cool to room temperature before re-connecting.
Controls:- An explanation of all controls
• ON
- Press once to operate the unit.
• OFF
- Press once to stop the unit from operation
- Keep pressed in small intervals to reactivate from jams.
• REVERSE
Screen Plates:-
There are three screen plates provided with this machine - coarse, fine and sausage.
Coarse
Fine
- ideal for raw meat, vegetables, nuts and dry fruits, cheese, fish etc.
- Ideal for raw or cooked meat, fish etc.
Sausage - Ideal for making sausages.
How to use your Kebbe Maker:
Fig. 6
Fig. 7
Fig. 8
The Kebbe maker attachment (12) has two parts, the shaper and the cone. Follow the assembly
instructions (see assembly of mincer attachement) up until the worm screw is fitted onto the motor
shaft inside the mincer head (figure 6). Insert the kebbe maker with the rounded side facing the
outside. Insert the securing cone and tighten the ring nut on to the head (figure 7).
Feed the Kebbe mixture through the food funnel using the food pusher. The mince will roll out as a
hollow cylinder into the bowl (figure 8). Cut the continuous hollow cylinder into the desired lengths
while it flows out. The Kebbe mixture is prepared by mincing meat and then passing the mince meat
with the ingredients, wheat & onions. Repeat this till you accure the required consistency.
How to use your Sausage Attachment:
1. Insert the sausage disc inside the grinder head
2. Insert the sausage stuffer into the nut.
3. Fit the assembled mincer head onto the motor unit.
4. Push the sausage skin (using either real or synthetic skin) over the sausage stuffer and knot the end.
5. Repeat the procedure 4 & 5, as mentioned under " How to use your meat mincer".
6. The sausage mixture is pressed through the sausage stuffer and into the sausage skin.
7. When the first sausage has reached the desired length, squeeze it through with your fingers at the
end of sausage and turn the sausage around its own axis once or twice.
Tip
Note
: You can turn 'OFF' the appliance after each single sausage length
: The sharp side of the cutter must face the disc.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
English
How to care for your meat mincer:
After use, switch 'OFF' the mincer and disconnect cord from the power supply. Ensure that the motor has
stopped completely before disassembling. Remove the nut and detach the discs and the cutting blade from
the worm. Pull the feeding screw out from the metal head. Detach the Mincer head by removing the screw, &
pulling the head from the unit.
Remove the meat residue if any from the end of the feeder screw. Wash all the parts in hot sudsy water &
allow to dry. Do not put the parts in the dishwasher. Wipe the motor unit with a damp cloth and dry. Wipe the
mincer screen plate and blade with salad oil before storing to prevent corrosion.
Do's and Dont's:
1. Always ensure that the bones and unwanted fat are removed from the meat before mincing.
2. Always use the pusher provided. Never use your fingers or any other utensils.
3. Never immerse the base unit into any liquid.
4. Do not try to mince material with hard fibers like ginger.
5. To avoid blocks and Jams inside the feeder screw, don't use excessive force.
6. If the unit gets blocked due to hard materials lodged on to the feeder screw or cutting blade, immediately
switch 'OFF' the unit and remove the ingredients before starting again.
7. When switching from 'ON' to 'OFF/REV' or vice versa, wait for 6 seconds to assure that the motor has
stopped completely.
8. Care is needed when handling the cutter blade especially during removal, re-fitting and cleaning.
9. Switch 'OFF' and unplug the appliance before approaching parts that move while in use.
10. Keep loose clothes, long hair and cord away from moving parts.
11. Always disconnect the appliance from the supply if it is left unattended
12. Switch 'OFF' and unplug the appliance & allow moving parts to stop before changing accessories,
cleaning or approaching parts which move in use.
Useful hints:
1. Do not over press the meat / vegetables with the pusher. Pusher must be used with suitable force.
2. In order to avoid the meat mincer being damaged, do not try to grind bone, nut or other hard things
with this mincer.
3. When processing, the meat should be fresh, not frozen.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you,
do not dispose it off with other household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again. Use
of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have
reached the end of their working life. To take advantage of this service please return your product to any
authorised repair agent who will collect them on our behalf. You can check the location of your nearest
authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. A
list of authorised Black & Decker repair agents and full details of our after-sales service and contact are available
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
English
BLACK & DECKER HOME APPLIANCE 2 YEAR WARRANTY
Black & Decker provides a 2 Year Warranty for this product from the date of purchase against defects due to
defective materials or workmanship. Motor/element burn-outs due to voltage fluctuations are not covered
under warranty. If the product should become defective within the warranty period, Black & Decker will repair
or (at Black & Decker's discretion) replace it free of charge.
The warranty provisions do not cover failure due to accident, misuse, abuse, negligence or non observation of
local regulations on the part of the user. Equally, the warranty provisions do not apply where the appliance has
been serviced by a person not authorized by Black & Decker or serviced with non-approved parts and this
has contributed to the fault of the product. Superseded models without a replacement equivalent will either be
repaired or (at Black & Decker's discretion) replaced with another product of similar retail value.
UPON PURCHASE
Fill in the Warranty Registration Card with the original Authorized Dealer's stamp (indicating date of purchase)
and attach your purchase receipt to it. Retain in case of claims in the future.
MAKING A CLAIM
Take your defective product together with the Warranty Registration Card & purchase receipt to your local
service Centre. You can either do this in person or send it freight prepaid. If mailing or shipping your appliance,
ensure that it is packed carefully in a sturdy carton with enough packing material to prevent damage. Include a
note describing the problem to the service Centre and be sure to give your return address.
DESIGNED FOR DOMESTIC PURPOSES ONLY.
Download from Www.Somanuals.com. All Manuals Search And Download.
Names
&
Addresses for Black
&
Decker Service Concessionaries
Afghanistan: Ishan National Co., Opp. Ministry of Justice, Kabul. Tel.: +93-2-2101727. Algeria: SARL Outillage Corporation, 04
Route De Dely Brahim Cheraga, Alger. Tel.: +213-21-364363/508, Fax: +213-21-369667. Bahrain: Fawaz Al Zayani, P.O.Box
26563, Adliya, Manama. Tel.: +973-17-715252/712756, Fax: +973-17-713789. Bangladesh: Ultra Corporation, 8, Kushol Centre,
Uttara, Dhaka 1230. Tel.: +880-2-8919272/9756 Ext.28, Fax: +880-2-9887167. Egypt: Anasia Egypt for Trading S. A. E., P.O.Box
2443, 110 Mostafa Refaat Street, Sheraton Heliopolis 11361, Cairo. Tel.: +20-2-2684159, Fax: +20-2-2684169. Ethiopia: Tewfik
Sherif & Co. Ltd., P.O.Box 5583, Debre Zeit Road, Addis Ababa. Tel.: +251-1-651700/601, Fax: +251-1-650570. India: Gryphon
Impex Pvt. Ltd., D-6/4, Okhla Industrial Area, Phase-I, New Delhi-110020. Tel.: +91-11-26372602-4, Fax: +91-11-26372601. Iran:
Tehran - Service Centre of Iran, No 510, South Karger Ave, Below Pasteur Sq. Tehran. Tel.: +98-21-6490608/0656/6407672. Kish
Island: Cayhan Electric Co., No. 69, Paradise Shopping Centre, Kish Island. Tel.: +98-76444-22894. Jordan: Bashiti Hardware,
P.O.Box 1564, TLA Ali, Amman. Tel.: +962-6-5350009/4770741, Fax: +962-6-5350012/4789783. Kenya: Zylog Enterprises, IPS
Building, Kuanda Street, P.O.Box 40877, Nairobi. Tel.: +254-2-338188/199, Fax: +254-2-330642. Kuwait: Al Omar Technical Co.,
P.O.Box 4062, 13041 Safat, Kuwait. Tel.: +965-4848595/0039, Fax: +965-4845652. Lebanon: Est. F.A. Kettaneh SA, P.O.Box
110242, Dora Highway, Kettaneh Building, Beirut. Tel.: +961-1-255860/6, Fax: +961-1-255891. Libya: El Ghoul Brothers, P.O.Box
348, Islamic Call Bldg., Office 201-202, Benghazi. Tel.: +218-61-9097681/4183, Fax: +218-61-9094123. Madagascar: Group Tana
Confort S. A. R. L., B. P. 1770, Antananarivo. Tel.: +261-20-2264505, Fax: +261-20-2264244. Malta: John G. Cassar Ltd., 36
Victory Str, Qormi QRM 06, Malta. Tel.: +356-21-493251, Fax: +356-21-483231. Mauritius: Happy World Marketing Ltd., Block 2,
Industrial Estate, Coromandel, P.O.Box 429, Port Louis. Tel.: +230-2076700, Fax: +230-2337330/7400. Nepal: Universal Trading
Centre, P.O.Box 1947, Tripureswor, Kathmandu. Tel.: +977-1-262192/260587/785, Fax: 261154. Nigeria: Amin Bros. Eng. Co. Ltd.,
30A (Plot 1291), Akin Adesola Street, Victoria Island, Lagos. Tel.: +234-1-3201778, Fax: +234-1-2613667. Oman: Oman Mktg. &
Service Co., P.O.Box 2734, Ruwi, Muscat. Tel.: +968-560232, Fax: +968-560255. Pakistan: Karachi - Ammar Service & Spares, 60,
Bank Arcade, Serai Road, Karachi. Tel.: +92-21-2426905, Fax: 2427214/5243. Pakistan: Lahore - Electronics Inn, 212-G Raja
Centre, Main Market, Gulberg, Lahore. Tel.: +92-42-5756750. Philippines: Modern House International Enterprises, 213 Rizal Ave.
Extension, between 2nd and 3rd Ave. Kalookan City. Tel.: +632 366-4487, Fax: +632 366-4489. Qatar: Al Muftah Trading & Cont.,
P.O.Box 875, Doha. Tel.: +974-4650880/4446868, Fax: +974-4441415. Saudi Arabia: Dammam - Ebrahim Fawaz Al Zayani,
P.O.Box 76026, Al Raka, Dammam. Tel.: +966-3-8140914, Fax: +966-3-8140824. Jeddah: Anasia - P.O.Box 50959, Jeddah -
21477. Tel.: +966-2-6710014, Fax: +966-2-6725929. EAC (Al Yousuf) - P.O. Box 30377, Jeddah - 21477. Tel.: +966-2-6519912,
Fax: +966-2-6511153. Madina: Garziz Trdg. for Bldg. Mat.&Decor., P.O.Box 3364, Madina. Tel.: +966-4-8261490/8227636, Fax:
+966-4-8265741. Riyadh: Anasia, P.O.Box 18689, Riyadh - 11425. Tel.: +966-1-2693751, Fax: +966-1-4501178. Yanbu: Bin Afif,
P.O.Box 530 Yanbu, Al Bahr. Tel.: +966-4-3222626/8867, Fax: +966-4-3222210. Sri Lanka: Delmege Gen. Equip. Pvt. Ltd., No.
428/1AT. B., Jaya Mawatha (Darley Road), Colombo-10. Tel.: +94-11-2665914, Fax: +94-11-2665915. Sudan: United Distribution
Company, P.O.Box 325, Sayed Abdul Rehman Street, Khartoum. Tel.: +249-11-772612/777296, Fax: +249-11-770919. Tanzania:
General Motors Investment, P. O Box 16541, 14 Vingunguti Nyerere Road, Dar Es Salaam. Tel.: +255-22-2862661/5022, Fax: +255-
22-2862667/5412/3. Tunisia: STE Tunisienne De Quincaillerie Stq., Nvelle Z.I 2013, Ben Arous, Tunis, Tunisia, Tel: +216 71386102,
Fax: +216 71380412. UAE: Abu Dhabi - Light House Electric., P.O.Box 120, Abu Dhabi. Tel.: +971-2-6726131, Fax: +971-2-
6720667. Dubai - Black & Decker (O) A.G., P.O.Box 5420, Dubai. Tel.: +971-4-7028234/233, Fax: +971-4-2822765. Ideal Mach. &
Equipt. R. W/shop P.O.Box 37116, Al Quoz, Dubai. Tel.: +971-4-3474160, Fax: +971-4-3474157. Sharjah - McCoy Middle East
LLC, P.O.Box 20228, Sharjah. Tel.: +971-6-5336321, Fax: +971-6-5336320. Uganda: The Building Centre, Kitgum House, 52
Station Road, P.O.Box 7436, Kampala. Tel.: +256-41-234567, Fax: +256-41-236413. Yemen: Aden - Middle East Trad. Co. Ltd.,
Mulla Dakka, Aden. Tel.: +967-2-240950, Fax: +967-2-240952. Sana'a: Middle East Trad. Co. Ltd., P.O.Box 12363, Hayel Street,
Sana'a. Tel.: +967-1-204201, Fax: +967-1-204204. Taiz: Middle East Trad. Co. Ltd., Campa area near Al-Kair mosque, Taiz. Tel.:
+967-4-231610/232033, Fax: +967-4-219869. Zimbabwe: J.D.Distributors, P.O.Box 226, 17 Bessemer Road, Graniteside, Harare.
Tel.: +263-4-753913-7, Fax: 753918. Cyprus: G. Kyprianou Trading Co Ltd., 51 Prodromou AVE. Strovolos, 1681, P.O. Box 23318
Nicosia Cyprus. Tel.: 00357 22 468170/1, Fax: 00357 22 468186, Email gktltd@spidernet.com.cy
WARRANTY REGISTRATION CARD
Download from Www.Somanuals.com. All Manuals Search And Download.
|