FREE 24-hour Tech Support: 724-746-5500
blackbox.com
© 2007. All rights reserved. Black Box Corporation.
Du a l-Sp e e d 10/100 St a cka b le Hu b
Combine your 10-Mbps devices in the same netw ork
as your 100-Mbps devices. The Hub automatically
senses the speed of each device.
Download from Www.Somanuals.com. All Manuals Search And Download.
TECH SPECS
Performance:
Power Supply (Internal):
Data Rate — 100 or 10 Mbps, per port, autosensing for speed. The hub
supports two traffic domains, one at 10 Mbps and one at 100 Mbps,
operating concurrently.
AC Power Connector — IEC-type, male recessed, rear of chassis
Power Input Voltage — 90 to 260 VAC (auto ranging)
Power Input Frequency — 47 to 63 Hz
PDV (100 M Path Delay Value) — 80BT exceeds Class II specification
Auto-Reconnect — Occurs after one packet of error-free reception;
Internal Switch or Bridge in Master models (one Master per stack, optional,
to interconnect the two traffic domains):
Processing Type— Store and forward
Address Table — 8 KB, self-learning
Packet Buffers — 2 MB, dynamically allocated and shared on both sides
Latency (not including packet time) — 10 to 100 Mbps: 5 microseconds,
100 to 10 Mbps: 5 microseconds
Power Consumption — 20 watts max.
48-VDC Power Supply (Optional):
Input — 36 to 72 VDC (auto-ranging)
Terminal Block, in rear — -, GND, +
Power Consumption —
LH8000A-M & C: 20 watts;
LH8016A-M & C: 30 watts
Mechanical:
Enclosure — Rugged high-strength sheet metal. Suitable for standalone
or shelf-mounting. Metal brackets for optional wallmounting
included.
Cooling Method — Fan cooled, internal @ 9 cfm
Size — LH8000A-M & C: 1.4"H x 8.5"W x 9.75"D (3.5 x 21.6 x 25 cm);
LH8016A-M & C: 1.7"H x 17"W x 9"D (4.4 x 43.2 x 22.9 cm)
Weight — LH8000A-M & C: 2.5 lb. (1.15 kg);
LH8016A-M & C: 4 lb. (1.8 kg)
Network Standards:
100 Mbps — IEEE 802.3u, 100BASE-TX
10 Mbps — IEEE 802.3, 10BASE-T
Auto Speed-Sensing — IEEE 802.3u
LH8000A
Operating Environment:
Ambient Temperature — 32 to 120°F (0 to 50°C)
Storage — -5 to +140°F (-20 to +60°C)
Ambient Relative Humidity — 10 to 95% (noncondensing)
Network Cable Connectors: (8) or (16) RJ-45 shielded female;
100 Mbps: Category 5 UTP/STP; 10 Mbps: Category 3, 4, 5 UTP
NOTE: Use Media Converters to connect to fiber media.
Stacking Cable: A stacking cable with 50-pin HSSI male connectors,
shielded, 9 inches (23 cm) long, is included with each client unit.
Switch, Manual: Uplink: Converts RJ-45 port #8 from a regular
(= position) user-segment port to a crossover (X position) uplink port
for on-off connection to a central hub or another cascaded hub.
LED Indicators on Chassis:
PWR — Steady on when power is applied
BR — Steady on if unit has bridge inside
ACT — Common packet activity indicator, one for 100-Mbps domain and
one for 10-Mbps domain
COL —Common collision indicator, one for 100-Mbps domain and one for
10-Mbps domain
LED Indicators per RJ-45 Port:
100 — Steady on when the port senses operation at 100-Mbps speed
LK — Steady on when twisted-pair link is operational
RX — Flashing when there is activity (receiving data) on the port
WHAT‘S INCLUDED
YOU MAY ALSO NEED…
✦ 8- or 16-Port Dual-Speed 10/100 Stackable Hub
✦ Stacking cable
✦ An internal power supply
✦ Cooling fan
•
•
•
Category 5 cable for 100-Mbps connections
Category 3, 4, or 5 cable for 10-Mbps connections
48-VDC power supply (call Technical Support for ordering
information)
✦ Metal brackets for shelf- or wallmounting
✦ User’s manual
Item
Code
Dual-Speed 10/100 Stackable Hub, 8-Port
Master
Client
LH8000A-M
LH8000A-C
Rackmount Dual-Speed 10/100 Stackable Hub, 16-Port
Master
Client
LH8016A-M
LH8016A-C
10/29/2007
#20091
724-746-5500
blackbox.com
3 of 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|