Earn BISSELL Rewards!
Register your
product today!
See details on
back page
2
3
Thank You
Safety Instructions
Product View
Assembly
4-5
6
7-12
Operations
13-15
16
Maintenance and Care
Troubleshooting
Accessories
17
18
Replacement Parts
Warranty
19
20
20
Product Registration
Consumer Services
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should be observed, including the following:
■ Be extra careful when cleaning stairs.
■ Close attention is necessary when used by or near children.
Read all instRuctions befoRe using
youR deeP cleaneR.
SAVE THESE
INSTRUCTIONS.
this model is foR household use
only.
WARNING:
To reduce the risk of fire,
electric shock, or injury:
GROUNDING
■ Do not immerse.
■ Use only on surfaces moistened by the cleaning process.
■ Always connect to a properly grounded outlet.
■ See Grounding Instructions.
■ Unplug from outlet when not in use and before conducting
maintenance or troubleshooting.
■ Do not leave machine when it is plugged in.
■ Do not service machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired at
an authorized Service Center.
INSTRUCTIONS
this appliance must be connected to
a grounded wiring system. if it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk of
electrical shock. the cord for this appli-
ance has an equipment-grounding con-
ductor and a grounding plug. it must only
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
■ Do not expose to rain, store indoors.
■ Do not pull or carry by cord, use cord as a handle, close door on
cord, pull cord around sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Grounded
Outlets
■ Unplug by grasping the plug, not the cord.
■ Do not handle plug or appliance with wet hands.
■ Do not put any object into appliance openings, use with blocked opening, or
restrict air flow.
Grounding Pin
■ Do not expose hair, loose clothing, fingers or body parts to
WARNING:
improper connection of the equipment-
grounding conductor can result in a risk
of electrical shock. check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
do not modify the Plug. if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. this
appliance is designed for use on a nomi-
nal 120-volt circuit, and has a grounding
attachment plug that looks like the plug in
the drawing above. make certain that the
appliance is connected to an outlet hav-
ing the same configuration as the plug.
no plug adapter should be used with this
appliance.
openings or moving parts.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible materials (lighter fluid, gaso-
line, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■ Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■ Do not pick up toxic material (chlorine bleach, ammonia, drain
cleaner, gasoline, etc.).
■ Do not modify the 3-prong grounded plug.
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in this User’s Guide.
■ Do not unplug by pulling on the cord.
■ Use only manufacturer’s recommended attachments.
■ Use only cleaning products formulated by BISSELL for use in this
appliance to prevent internal component damage. See the cleaning
fluid section of this guide.
■ Keep openings free of dust, lint, hair, etc.
■ Do not point attachment nozzle at people or animals
■ Keep appliance on a level surface.
■ Turn off all controls before unplugging.
■ Unplug before attaching the TurboBrush®.
3
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Upper Handle
Carry Handle
Heat
Indicator Light
Formula &
Water Tank
Power Button
Flex Hose
Power Cord
Quick Release™
Cord Wrap
Dirty Tank
Portable Spot
Cleaning Release
Pedal
Edge Sweep®
Brushes
Removeable
Nozzle
4
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Product view
Spray Trigger
Cord Clip
Tool Storage
Support Handle
Tool Storage
(some models)
Hose Secure
Latch
WARNING:
Recline Pedal
to reduce the risk of fire
and electric shock due to
internal component
damage, use only bissell
cleaning fluids intended
for use with the deep
cleaner.
Cleaning fluid
Keep plenty of genuine bissell 2X formula on hand so you can clean and protect whenever
it fits your schedule. always use genuine bissell deep cleaning formulas. non-bissell
cleaning solutions may harm the machine and will void the warranty.
bissell
bissell
bissell
bissell
bissell
bissell
bissell
tough
2X lavender
essence
2X
2X fiber
2X Pet stain 2X allergen 2X natural
Professional cleansing
and odor
cleansing
orange
formula
stain
formula
deep
formula with formula with formula
Precleaner
cleaning
scotchgard™ scotchgard™
formula with Protection
Protection
scotchgard™
5
Protection
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Your deep cleaner comes in two easy
to assemble components:
1.
2.
1. upper handle
2. Portable spot cleaner/base
The only tool you will need to
assemble your cleaner is a Phillips
screwdriver.
1.
1. slide upper handle onto base
2. screw the four included screws into the
marked holes.
Note: two of the holes are located
underneath the support handle indi-
cated by graphics. Angle screwdriver
to secure into place.
Screw Holes
3. Wrap power cord around Quick Release
cord Wrap.
2.
4. Wrap flex hose around the hose wrap
and secure with hose secure latch.
5. snap attachment(s) into the back of unit.
Warning:
Do not plug in your
cleaner until you have
completely assembled it
per the above instructions
and are familiar with all
instructions and operat-
ing procedures.
6
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Special features
Innovative cleaning technology
This innovative deep cleaner offers two
machines in one. The upright deep cleaner
uses the power of heat, brushes and clean-
ing formula to get deep down dirt for a
maximum clean. The portable spot cleaner
detaches to clean tough spots and stains and
hard to reach areas.
Hot water heater
Pedal graphic
This deep cleaner features a patented built-in
hot water heater which will heat the hot tap
water you put in to safely optimize cleaning
effectiveness. The heater temperature is limited
to prevent carpet damage. The heater auto-
matically turns on when you turn the machine
on. This operates only in upright cleaning
mode.
Tip:
for easy carrying, grab the
carry handle portable spot
cleaner and balance with the
handle on the back of the
machine.
Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep clean-
ing. To help restore this important protection,
only BISSELL offers deep cleaning formulas
with Scotchgard protector. This offers extra
protection against dirt and tough stains to
keep your carpets looking good longer.
To maintain your Scotchgard 5-year limited
stain warranty, you do not need to hire a
professional. By using your BISSELL deep
cleaner with BISSELL 2X formulas containing
Scotchgard protector every 12 months, your
carpet warranty from 3M remains in effect.
No other home deep cleaning system can do
this for you. Refer to the Scotchgard Protector
warranty for details.
7
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Before you clean
1. move furniture to another area if cleaning
ATTENTION:
some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggra-
vate this condition.
an entire room (optional).
2. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
3. Pretreating (optional):
3a. Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as
entryway and hallways.
3b.
3b. BISSELL Tough Stain precleaner
spray the bissell tough stain
precleaner formula onto heavy traffic
areas, soiled areas or stains.
allow to penetrate for at least 3 minutes.
clean as normal, using the deep
cleaner in upright mode, following the
instructions below.
1.
2.
Upright cleaning mode
Filling formula & water tank
1. Remove tank from the base of the machine
by lifting up tank carry handle.
Note: This tank was designed with a flat
bottom so it can be easily filled.
2. unscrew the black cap and remove bottle
insert.
3. fill tank with hot tap water to the water fill
line. add two ounces of bissell 2X for-
mula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on
the deep cleaner.
Cleaning
1. Plug into a proper outlet and press the
power button. allow 1 minute for the hot
water heater to warm-up before cleaning.
2. While pressing the trigger, make one slow
forward wet pass and another one back.
8
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Upright cleaning mode continued
Cleaning continued
3. Release the trigger and make one slow
forward and backward pass over the same
area. Repeated passes will help aid in dry
time.
CAUTION:
Do not overwet. Take care not
to run over loose objects or
edges of area rugs. Stalling
brush may result in premature
belt failure.
4. continue passes until cleaning area is
complete.
Note: Your machine may be equipped
with a circuit breaker that will auto-
matically shut off the brush if a large
or loose object is caught in the brush
roll. If that happens, be sure to unplug
your machine, remove the foreign
object, and then plug the machine
back in to reset the circuit breaker.
Tip:
make only one trip to the sink
by removing the entire por-
table cleaner. fill and empty
in the same trip.
Empty dirty tank
1. When the dirty tank reaches the
“FULL” line on the tank it is time to
empty.
2. Remove dirty tank and carry to a utility
3.
4.
2.
sink, toilet or outside (where you will
dispose of the dirty water).
3. to unlock the dirty tank lid, rotate han-
dle over the back of the tank. Remove
lid and pour out dirty water. Rinse out
dirty tank to remove any debris.
4. Replace top of tank, and rotate the
handle forward to lock in place on front
of tank.
Cleaning your machine
1. flush out machine of any remaining
residual solution.
fill the formula & water tank with hot
tap water and turn on your machine.
WARNING:
to reduce the risk of fire, electric
shock, or injury, turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Recline handle and press the spray trig-
ger for about 15 seconds while making
forward and backward passes on car-
pet. continue without pressing the trig-
ger until there is no more water being
suctioned up.
turn off the machine and wrap the pow-
ercord. make sure the dirty tank and
the formula & water tank are emptied,
rinsed, and dried before the next use.
Tip:
for best results empty,
rinse and dry both tanks
before you replace tank, clean all
debris from red filter screen.
before storing.
9
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Upright cleaning mode continued
Cleaning your machine continued
2. Rinse front nozzle of any dirt and debris.
Remove portable spot cleaner from the
WARNING:
to reduce the risk of fire, elec-
tric shock or injury unplug from
outlet before servicing.
base of the machine.
unscrew three screws with Phillips screw
driver and remove nozzle.
Rinse nozzle out at the faucet.
Place back onto the machine by hooking
the tabs into the holes on the bottom sides
of the machine. secure with screws.
2.
3. the inside of the end caps can be
wiped out with a clean paper towel,
or for a more thorough clean, the end
caps can be taken off and rinsed clean.
4. any loose hair or debris can be pulled
from the brush rolls and thrown away. for
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
your machine is now ready to be stored.
Tip:
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
let all parts dry completely
and replace onto machine.
Freezing will damage internal
components and void the warranty.
10
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Portable spot cleaning mode
Preparing the machine
1. step on the portable spot cleaning pedal to
release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. unwrap flex
hose completely.
3. attach the desired tool to the hose grip
until it snaps together. make certain the
tool is securely attached.
4. twist the Quick Release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into grounded outlet.
Filling tank
1. follow the instructions for filling the tank
in the upright cleaning mode section on
page 8
Cleaning with Tools:
ImPORTANT! If using to clean uphol-
stery, check upholstery tags. Check
manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you
can use your Lift off Deep Cleaner if
the tag is coded with an “X” or an
“S”(with a diagonal stripe through it),
or says “Dry Clean Only”, do not pro-
ceed with any deep cleaning machine.
Do not use on velvet or silk. If manu-
facturer’s tag is missing or not coded,
check with your furniture dealer.”)
1. hold the tool approximately 1" above
the soiled surface. Press the spray trig-
ger to apply the cleaning solution to the
soiled area.
Note: Hold end of hose below the
tank water level to help prime the
portable spot cleaner.
Manufacturer’s tag
2. using the brush on the tool, gently scrub the
area to be cleaned.
ImPORTANT
Check for colorfastness in an
inconspicuous place. If pos-
sible, check upholstery stuffing.
Colored stuffing may bleed
through fabric
3. apply downward pressure on the tool and
pull it toward you. the suction will remove
the dirt and cleaning solution. continue until
no more dirt can be removed.
11
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
Portable spot cleaning mode continued
Cleaning with Deep Reach™ Tool
1. set tool on soiled surfaces and press the trig-
ger to spray solution onto the soiled area to
be cleaned.
1.
2. slowly move the tool back and forth over
the soiled surface, keeping the tool in con-
tact with the carpet.
3.
Release trigger and move tool slowly
over the soiled area to suction up water
and dirt.
4. continue to clean the area, working in
small sections, until no more dirt can be
removed.
Empty dirty tank
Follow the instructions under Empty
dirty tank section on page 9 of the
Upright cleaning mode section.
1.
Replacing portable machine on base
graphic
1. align the product as the graphic shows,
with the cord side on the left and hose
side on the right.
2. Push down the portable spot cleaner
until you hear it click securely into
place. test the fit by pulling up on the
carry handle to make sure it is secure.
Cleaning portable machine
1. Remove and rinse the tools in clean, run-
ning water. dry and replace in the tool
storage provided.
2. it is recommended that you suction clean
water from a bowl to rinse out the hose.
then lift end of hose and stretch out to
ensure all water is cleared from hose.
3. coil flex hose around the hose wrap
and secure with latch.
4. check suction gate and if it appears
dirty, follow steps 1-4 under cleaning
suction gate on page 13.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
machine care (check regularly)
Cleaning suction gate
WARNING:
to reduce the risk of fire, elec-
tric shock, or injury, turn power
off and disconnect plug from
electrical outlet before perform-
ing maintenance or trouble-
shooting.
The suction gate automatically diverts
air when the portable deep cleaner
is detached. This should be checked
and cleaned regularly for any dirt and
debris.
1. step on the pedal and remove the
portable spot cleaner.
2.
Remove dirty tank.
2. Remove two screws and pull off
suction gate door.
3. Wipe suction gate clean and rinse
suction gate door.
Suction
gate
4. Replace suction gate door and two
screws.
Cleaning spray tips
1. step on the pedal and remove the
portable spot cleaner. to remove, push
in tab and pull it out.
Spray
Tips
2. clean by rinsing under hot water.
3. Replace by snapping back in.
4. Repeat steps on second spray tip.
1.
Cleaning solution filter
1. step on the pedal and remove the
portable spot cleaner. Remove the red
solution filter cap on the base of the
machine by inserting a coin or a flat
head screw driver into the slot on the
top.
2.
2. turn counter clockwise to unscrew. set
Solution
Filter Cap
aside.
3. Remove the white filter by the post.
3.
Rinse the filter under water.
4. Replace the white filter back into the
filter area.
Note: make sure the white filter
is seated properly before replac-
ing the red solution filter cap.
5.
5. Replace the red solution filter cap and
turn clockwise to tighten.
Filter
13
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Small belt removal and replacement (as needed)
Occasional replacement of one or
both belts may become necessary.
If that is needed, please follow the
WARNING:
instructions below.
to reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
1. turn off the machine, and unplug it from
the outlet. Remove portable spot cleaner.
2. Remove the nozzle by unscrewing three
screws on the nozzle cover.
2.
4.
3. turn the machine on its side.
ImPORTANT: with portable spot
cleaning pedal facing down.
4. Remove end cap by unscrewing the
3 screws. take care not to drop the
screws into the unit.
5.
5. Remove 1 silver screw from the pivot
arm.
6. Remove pivot arm by gently lifting up.
7. Remove small brush belt.
8. Replace small brush belt, and reverse
steps above.
6.
9. manually rotate brushes by hand to make
sure they move freely. may notice a slight
resistance from the motor.
8.
7.
14
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and care
Brush removal and large belt replacement (as needed)
Brushes can be removed for cleaning
or replacement as needed.
WARNING:
1. follow small belt removal instructions on
to reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
page 14 items 1-7.
2. Remove brush rolls by pulling them off
of the metal rods. Be careful not to
lose the small washer at each
end of the brush rolls.
2.
4.
3.
3. Re-attach the large belt to the grooves
on the end of the new brush rolls. if the
belt is damaged, replace with a new
belt.
4. Place cleaned or new brush rolls back
onto the rods. make sure one washer is
on each end of the rollers prior to sliding
onto the rod. be sure the brush is seated
completely on the rod.
5.
5. Replace small belt over grooves in back
roller and metal cog.
6. Replace pivot arm and secure with silver
screw.
7. Re-attach end cap by tightening with the
(3) black screws.
6.
8.
7.
8. Return front nozzle to front of unit, by
latching from underneath and then
securing with 3 screws.
9. follow step number 8 & 9 on page 14.
if you have any questions or are having
trouble installing or replacing your
belt(s) or brushes, please call
BISSELL Consumer Services.
15
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Built-in heater ready light does not illuminate
Possible causes
Remedies
1. The power is not turned ON
1. The power must be ON to activate the heater ready light
2. The portable spot cleaner is not attached completely
2. Make sure the portable spot cleaner is attached
Push down firmly to check
Reduced Spray or No Spray
Possible causes
Remedies
1. Formula & water tank may be empty
1. Refill tank
2. Formula & water tank may not be seated completely
3. Pump may have lost prime in portable spot cleaning mode
4. The portable spot cleaner is not attached completely
5. Solution filter may be clogged
2. Turn power OFF. Remove and reseat tank
3. Hold end of hose below water level in tank to prime
4. Push down firmly to check connection
5. Follow steps under cleaning filter on page 13
®
DirtLifter PowerBrush does not turn
Possible causes
Remedies
1. The portable spot cleaner is not attached completely
1. Make sure the portable spot cleaner is attached.
Push down firmly to check
2. The unit is in the upright position
2. Brushes only rotate when unit is reclined using the
recline pedal
3.
3. Turn the machine OFF and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
Circuit breaker on machine (if equipped) may have tripped
4. The belt is off or broken
4. Turn power OFF and unplug unit from outlet. Follow
instructions on pages 14 and 15
Loss of suction power
Possible causes
Remedies
1. Tanks may not be seated properly
1. Pick up both tanks and reseat them so it they fit snugly on
the unit
2. Nozzles may not be assembled properly
2. Unplug the unit. Check to make sure the "lip" of the
nozzle is securely hooked into the groove on bottom of
Tank (see page 10)
3. The portable spot cleaner is not attached completely
3. Make sure the portable spot cleaner is attached.
Push down firmly to check
4. Dirty tank has picked up maximum amount of
dirty water and has reached full line
4. Empty dirty tank
5. Formula & water tank is empty
6. Suction Gate is open.
5. Check fluid levels in formula & water tank
6. Check to make sure the suction gate is closed. Follow
“Cleaning Suction Gate” instructions on page 13.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
16
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories - BISSELL deep cleaner
Item Part No. Part Name
1
2
3
4
5
203-6651
203-6652
203-6653
203-6654
203-7885
3” tough stain tool
Powered turbobrush® hand tool
4” upholstery tool
6” stair tool
spraying crevice tool
6
7
8
203-7412
deep Reach Pet tool
62e5-2
99K5-2
2X fiber cleansing formula with scotchgard™ Protection 60 oz.
2X Pet stain and odor formula with scotchgard™ Protection 60 oz.
9
89Q5-2
83P3-2
34b5-2
78h6-3
26V2
2X allergen cleansing formula 60 oz.
10
11
12
13
14
2X natural orange formula 60 oz.
2X lavender essence formula 60 oz.
2X Professional deep cleaning formula with scotchgard™ Protection 48 oz.
2X spring breeze formula 60oz.
0790
Pet stain and odor Remover™ 16 oz.
15
16
4001
tough stain Precleaner 22 oz.
mesh bag
310-3040
*not all parts are included with every model.
1
2
3
4
5
6
7
8
9
10
15
11
16
12
13
14
17
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacement parts - BISSELL deep cleaner
Below please find a list of common replacement parts. While not all of these
parts may have come with your specific machine, all are available to you for
purchase, if desired.
Item Part No. Part Name
1
203-7893
203-6675
203-7894
203-7904
203-7896
203-7897
203-7898
203-7901
203-7906
203-7907
203-7915
203-7916
203-7900
203-7899
203-6689
203-7918
203-7917
formula & Water tank assembly (includes cap and insert)
cap and insert for formula & Water tank
dirty tank assembly (includes entire tank)
cord Wrap
end caps with edge brushes (2 pack, includes screws)
spray tips assembly (includes two spray tips)
in-line filter assembly (includes cap and filter)
nozzle gasket
nozzle cover assembly (includes gasket, nozzle cover, and front nozzle cover)
front nozzle
brush assembly (includes 2 brush rolls, 2 axles, and 2 swivel arms)
brush single Pack (includes 1 brush roll, and 1 axle)
small brush belt
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
large brush belt
hose secure latch
dirty tank gasket assembly (include both gaskets)
diverter cover assembly (includes cover and screws)
*Not all parts are included with every model.
1
2
3
4
5
6
7
8
9
10
15
11
16
12
13
14
17
18
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty - Accessories - BISSELL deep cleaner
this warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. if you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact bissell consumer services by e-mail,
telephone, or regular mail as described below.
Limited Two Year Warranty
subject to the *eXcePtions and eXclusions identified below, upon receipt of the product
bissell homecare, inc. will repair or replace (with new or remanufactured components or
products), at bissell’s option, free of charge from the date of purchase by the original
purchaser, for two year any defective or malfunctioning part.
see information below on "if your bissell product should require service".
this warranty applies to product used for personal, and not commercial or rental service. this
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any
other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service:
contact bissell consumer services to locate a bissell authorized service center in your
area.
if you need information about repairs or replacement parts, or if you have questions about
your warranty, contact bissell consumer services.
Website or E-mail:
Or Call:
bissell consumer services
1-800-237-7691
monday - friday 8 a.m. - 10 p.m. et
saturday 9 a.m. - 8 p.m. et
Or Write:
bissell homecare, inc.
Po box 3606
grand Rapids, mi 49501
attn: consumer services
bissell homecaRe, inc. is not liable foR incidental oR conseQuential damages
of any natuRe associated With the use of this PRoduct. bissell’s liability Will not
eXceed the PuRchase PRice of the PRoduct.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROm THE TERmS OF THE LImITED WARRANTY
this WaRRanty is eXclusiVe and in lieu of any otheR WaRRanties eitheR oRal oR
WRitten. any imPlied WaRRanties Which may aRise by oPeRation of laW, including
the imPlied WaRRanties of meRchantability and fitness foR a PaRticulaR PuRPose,
aRe limited to the tWo yeaR duRation fRom the date of PuRchase as descRibed
aboVe.
some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.
19
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product.
you’ll receive:
BISSELL Rewards Points
automatically earn points for discounts and free shipping on future purchases.
Faster Service
supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
BISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday
9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 19 for details.
©2011 bissell homecare, inc
grand Rapids, michigan
all rights reserved. Printed in china
Part number 120-4346
Rev 5/11
Visit our website at:
scotchgard is a trademark of 3m
20
w w w. b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|