USER GUIDE
Sym p h o n y 2 2 1 0
DIGITAL CORDLESS
TELEPHONE WITH
ANSWERING
MACHINE
THIS EQUIPMENT IS NOT DESIGNED FOR
MAKING EMERGENCY TELEPHONE CALLS
WHEN THE POWER FAILS. ALTERNATIVE
ARRANGEMENTS SHOULD BE MADE FOR
ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
UK Argos Ver. 1, Nov. 07
BINATONE “ Symphony 2210 ”
User Guide - Front Page
BINATONE “ Symphony 2210 ”
User Guide - Back Page
1)White background and black letters
2)Material: 80lb Book Paper
3) Size: 105mm(w) x 148mm(H) A6
Download from Www.Somanuals.com. All Manuals Search And Download.
Σψµ πηονψ 2210
Remote operation
Using a tone-dialling phone, dial your home number
While your outgoing message is playing, press
1
2
3
Key in your remote PIN (security code)
The default PIN is 00 0000.0. T0o0se0 t0a0n0ew PIN, see the User Guide.
Press
to play back your messages
4
5
2
You can also use the keys shown on the other side of this card
Bypass the outgoing
message (OGM)
Delete the message
6
0
0
currently being played
Play/ Stop
2
3
1
Switch the machine ON
Switch the machine OFF
Skip forward to the
next message
–
Go back to the
previous message
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
If t h e h an d set ’s d isp lay is b lan k
W h ere t o fin d it
Redial
/ CDS/
PAUSE button
Press the
button to switch
the handset on
numbers you called.
of the last 10 phone
Press to open a
Press and
list
to open
MENU
button
hold
the
list of Caller Display
records.
pause (you might
number to insert a
Press while dialling a
need
Press to start using Menu
functions.
this on a PBX).
R (Recall) button
PHONE BOOK
button
You may n eed this if your
phone is connected to a
PBX, or if you use
Press to open the Phone Book.
HANG UP
/ ON–OFF / C (Cancel) button
PHONE
/ OK
button
Press to end a call.
Press to begin or answer a
phone call.
When using Menu functions,
network-based services.
Press and hold for 3 seconds to switch the handset on or
off.
Press while editing or using Menu functions, to cancel what
you’re doing and return the display to Standby mode.
press to confirm your
selection.
Press
on
switch
the
speakerphone
or
off.
UP
and DOWN
INT button
buttons
Press during programming
to mo ve
menus and options.
Press to move through
Press to make an intercom call, if you h ave m ore th an on e h an d set.
Keypad Lock / MUTE / Scroll button
Press and hold for 2 secon d s to lock and
through the
unlock the keypad.
the Caller
Redial list.
Press during a call to
adjust the v
in
Display or
Press during a call to mute the mouthpiece.
When viewing a number with more than 12
digits, press to scroll forward along the display.
olume
the
earpiece or
speakerphone.
Ringer Off
Scroll button
/
Press and hold for 2 seconds
to turn the ringer off.
IN
USE
light(Green)
Comes on when
This
the
handset
is
is
in
connection
m issed
with
base
When viewing a number with
more than 12 digits, press to
scroll back along the display.
blinks
when
there
new
call.
(
HANDSET
Press
you've forgotten where you put a handset.)
LOCATOR(PAGE) b utton
CHARGE light(Red )
to
m ake all
registered
handsets
ring
this
is
usefull
This comes on when the handset’s
batteries are being charged.
For details of the answering machine
buttons and lights, go to the ‘Answering
machine’ section of this guide (page 26 )
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Sym b ols on t h e h an d set 's d isp lay
The handset’s number(if you have
m ore than one hand set on your
Sym p hony 2210 system ).
The handset’s name
(the default is BINATONE)
JANny 2
16-25
The current time
W h at t h e sym b ols m ean
The first symbol on steadily when there’s a radio link between
the handset and base unit. It flashes while the handset is trying
to establish a link to the base unit. If this symbol flashes while
you’re on a call, move closer to the base unit.
Radio link/
signal level
The second symbol shows the strength of the signal.
You have new Caller Display records.
New call
Phone
Appears when you have a connection to the outside line.
Flashes when there’s an incoming call to be answered
(even if the ringer is turned off).
Comes on when you’re storing numbers in the Phone Book, and
when you’re making calls to stored numbers.
Phone
Book
Comes on when the handset’s ringer is turned off.
Comes on when your handset’s microphone is muted.
Ringer off
Mute
Ap p ears when the answering m achine function is on.
Flashes when a new m essag e is received .
TAM
Appears when the handset is set to route non-local calls via an
alternative network service provider (using the Prefix code).
Provider
network
Comes on when your handset’s keypad is locked.
Lock
When this shows ‘nearly empty’ (
base unit or charger pod as soon as possible, to charge the
batteries. While the batteries are being charged, this blinks.
), put the handset on the
Battery
charge
level
Your handset's loudspeaker on.
Speaker
phone
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1
4
telephone and charger pod, 4
19
Examples of Caller Display records, 19
To check Caller Display records, 20
Radio signals between handset and base
unit, 4
To return a call, 20
Mains power connection, 4
To delete a Caller Display record, 20
Installation and set-up
Before you start
5
To delete all Caller Display records, 2
To store a number in the Phone Book 21
0
8
Using a multi-handset system
To page all handsets, 2
Intercom call from the handset, 2
Transfer a call, 2
Three-way conference, 2
New call tone, 2
22
Electrical safety, 8
Interference, 8
2
‘Out of range’ warning, 8
3
4
Switching on and off
9
5
Setting the date and time
Your handset's names
10
5
Answering machine - Quick Ref
Answering machine - Basis use
26
27
1
1
Ringer melody and volume
12
Switch on and off, 2
7
Base unit ringer, 1
Handset ringer, 1
Making & answering calls
To make a call, 1
2
Answering modes, 28
3
To change answering mode, 28
Outgoing messages ( OGMs), 29
14
4
To record a new outgoing messages, 29
To play back the OGM , 30
To record a memo , 30
To answer a call, 1
4
To end a call , 14
Earpiece volume, 14
To play your Messages and Memos , 31
Muting the microphone, 1
5
Call screening, 32
To delete individual messages, 33
To delete all old messages, 33
Last Number Redial, 1
To delete an entry from the Redial list, 1
To delete all entries from the Redial list,15
5
5
Answering machine - Remote use 34
Using the Phone Book
16
To activate remote control, 34
Remote operation, 34
To store names and numbers, 16
To call a stored number, 16
Answering machine - Advanced use 35
To modify (change) a Phone Book entry,
17
To set the Ring delay, 36
Toll saver 37
To delete a Phone Book entry, 17
… continued overleaf
2
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Contents
Troubleshooting
Cleaning and care
44
49
When the memory is full 37
Default settings on TAM 37
Customisz e your phone system
38
Guarantee and service information 50
Handset name, 38
Key tone, 38
Display language, 38
Technical details
51
52
Declaration of conformity
PIN code, 39
Dial mode, 39
Flash (recall) timing, 40
Default setting, 41
Handset registration
42
To register a new handset, 42
To register to a different brand of
base unit,43
To de-register a handset, 43
Con n ect ion an d con d it ion s for use
You can connect your Symphony 2210 to a direct exchange line (DEL) — a
line connected to a local exchange, with its own phone number; to an
extension socket connected to a DEL; or to an extension on an
approved compatible PBX. Do not connect the Symphony 2210 as an
extension to a payphone.
The ringer equivalence numbers (RENs) of all instruments (phones,
fax machines, etc.) connected to an exchange line must not add up to
more than 4 — otherwise, one or more of them may not ring and/or
answer calls correctly. The Symphony 2210 has a REN of 1, and most other
telephones have a REN of 1 unless marked otherwise.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Read t h ese n ot es first
Before you install your Symphony 2210 —
Ch oosin g a sit e The base unit and charger pod(s) should be placed on a
for t h e b ase
un it t elep h on e
an d ch arg er
p od
level surface, in a position where:
I
the mains adapter plug will reach an easily accessible
230-V ACswitched mains supply socket — never try
to lengthen the mains power cable
I
the base unit’s telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
I
I
I
it is not close to another telephone - this can cause
radio interference
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
it is not close to other electrical equipment - fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Rad io sig n als
b et w een
h an d set an d
b ase un it
To use your cordless handset and base unit together,
you must be able to establish a radio link between
them. Be aware that:
I
Any large metal object - like a refrigerator, a mirror
or a filing cabinet - between the handset and the
base unit telephone may block the radio signal.
I
Other solid structures , like walls, may reduce the
signal strength.
Main s p ow er
con n ect ion
IMPORTANT - The Symphony 2210 base unit and
charger pod must be used with the mains adapters
supplied. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
4
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
In st allat ion an d set -up
Ch oose a suit ab le sit e for t h e
b ase un it t elep h on e
See page 4
1
2
Con n ect t h e m ain s p ow er
lead an d t h e t elep h on e
lin e cord in t o t h e
b a ck of t h e b ase un it
Use the telephone line
cord supplied with your
DECT Phone- don’t
use any other
telephone line cord
Plug t h e m ain s ad ap t er in t o a
3
4
230 V AC, 50 Hz m ain s socket ,
w it h t h e sw it ch on t h e socket
set t o OFF, t h e s o c k e t -o u t le t
n e e d t o b e n e a r t h e
e q u ip m e n t a n d s h a ll b e
e a s ily a c c e s s ib le .
See the note
on page 4
In st all t h e ch arg er p od (s) …
Plug the mains adapter into a 230 V AC,5 0 Hz
mains socket, with the switch on t h e so cke t
set to OFF,t h e so cke t -o u t le t n e e d t o b e
n e a r t h e e q u ip m e n t a n d sh a ll b e e a sily
a cce ssib le .
See the note
on page 4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Installation and set-up
Sw it ch on at t h e m ain s socket (s)
5
6
Fit t h e b at t eries in t h e cord less h an d set s
DON'T use n on -rech arg eab le b at t eries in th e
h a n d se t -t h e y m ay b urst , causin g d am ag e . Use
t h e rech arg eab le b at t eries sup p lied (1 .2 V AAA
size 300m Ah NiCd or 550m Ah NiMH).
A.Insert the three rechargeable
batteries as shown
B.Fit th e b attery com p artm en t
cover, slid in g it in to p lace an d
p ressin g firm ly to m ake sure
it is secure.
-
+
-
+
-
+
Ch arg e t h e b at t eries
for 15 h ours
7
Before you use the cordless
handsets for the first time,
it’s important to charge
the batteries fully.
The bars on the
battery level symbol
continuously change
as the batteries are
being charged
You hear a ‘beep’ when
the handset is correctly placed on the
charging cradle.
Leave the handsets on the
b ase un it
15 hours.
a nd charger pod(s) for
To keep the batteries charged,
The CHARGE
light comes
on
whenever you don’t need to use the handset
(such as overnight, or when you go out), leave
it on the base unit or ch arg er p od .
Con n ect t h e b ase un it t o t h e t e le p h o n e lin e
Switch off power at the mains socket . In se rt t h e
telephone line plug into the so cke t Swit ch m ain s
power back on
8
NOTE: the charger
p od d o e sn 't h ave
Make sure the mains socket is
switched on — the phone won’t
work without electrical power
a
co n n e ct io n to th e
telephone line.
6
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Installation and set-up
If you h ave a Broad b an d lin e
9
If you connect your telephone to a line with a broadband connection,
insert a m icrofilter(not included) between the telephone
you will need to
and the
between
telephone line, otherwise you m ay get interference
the telephone and the broadband, which could cause problem s.
In a hom e with broadband, every telephone m ust have a m icrofilter
connected, not just the one at the telephone point that your
m odem is connected to. If you need m ore broadbank m icrofilters,
contact your broadband supplier.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Before you st art
Elect rical
safet y
■
■
DON’T let the base unit telephone or charger pod get
wet. Electrical equipment can cause serious injury if
used while you are wet or standing in water.
If the base unit telephone or charger pod ever falls into
water, DON’T retrieve it until you have unplugged the
power lead from the mains and the telephone line plug
from the telephone socket (base unit telephone only);
then pull it out by the unplugged cables.
■
NEVER use your Symphony 2210 outdoors during a
thunderstorm - unplug the base unit telephone from
the telephone line and the mains socket when there are
storms in your area. Damage caused by lightning is not
covered by the guarantee.
In t erferen ce
If the sound quality gets worse as you move around
while using the cordless handset, this is probably
caused by interference between the handset and the
base unit, perhaps because you are too near to another
phone or other electrical equipment.
Move to a different position to clear the interference.
If you do not move, your call may be cut off.
‘Out of ran g e’
w arn in g
If you hear a warning tone during a call, and/or the
sound in the earpiece becomes faint or distorted, you
may be going out of range of the base unit telephone.
Move nearer to the base unit telephone within 20
seconds, until the tone stops. Otherwise, your call may
be cut off.
While you are out of range and you are not on a call,
the handset’s display shows
and the ‘signal
SEARCHING-
level’ symbol flashes. Before you make a call, you must
move closer to the base unit until the handset’s name
and number are displayed and the symbol stops
flashing.
8
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Switching on and off
To switch the
handset on
and off
To switch the handset off and save battery
power:
Press the HANG UP/C button and hold it
until you hear a beep. When you release
the button,the display will go blank.
◗
◗
To switch the handset back on:
Press and hold the HANG UP/C button. Or,
place the handset on the base or charger pod.
To lock the
h an d set
keypad
To lock the keypad:
Press the # (HASH) button and hold it
until the ‘key’ symbol appears on the display
◗
To unlock the keypad:
Press the # (HASH) button and hold it for
◗
◗
2
second until the ‘key’ symbol disappears
from the display
Or simply replace the handset on the base
unit or charger pod
Notes
◗ When the handset is switched off, it can’t be used for
making calls, including emergency calls.
◗ When the handset is switched off, it won’t ring for
incoming calls, but the base unit will still ring. To
answer a call when the handset is switched off, you
need to switch it back on. Remember that it may take
a few moments for the handset to re-establish a radio
link with the base unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Set t in g t h e d at e an d t im e
If you subscribe to Caller Display (see pages 19 ) your
Symphony 2210 should take the date and time setting from
the network when you receive an incoming call. So you
won’t need to set the time and date yourself,but you
may need to change the year.
If you don’t subscribe to Caller Display, you’ll need to
set the date and time using the cordless handset.
1
2
3
Press the MENU button
To set t h e
d at e an d
t im e
Ú The display shows
PHONEBOOK
Press the ■ button
■
Ú
The display shows
DATE/TIME
Press the PHONE/ OK button
Ú
The display shows the date (
) with
DD-MM-YY
the first digit flashing.
4
Key in the date, as a six-digit number
After you key in each digit, wait a moment for
the cursor to move to the next position before
you key in the next digit. Remember to include
any 0s if necessary.
5
6
Press the PHONE/ OK button
Ú
The display shows the time (
the first digit flashing.
) with
HH-MM
Key in the time, as a four-digit number, then
press the PHONE/ OK button
Use the 24-hour clock and include any 0s if
necessary.
7
Press the HANG UP/ C button to go back to
standby mode
10
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Your h an d set 's n am es
Before you start to use your cordless handsets, you’ll
probably want to personalise their displays. Each display
shows a name (up to eight characters) and number.
The default name is
registered to your base unit is numbered 1, 2, 3 … etc.
, and each handset
BINATONE
If the handset’s display is blank, press the
HANG UP/ C button to switch it on.
■
1
2
3
4
5
Press the MENU button
Ú
The display shows
PHONEBOOK
Press the ■ button FOUR times
■
Ú
The display shows
HANDSET
Press the PHONE/ OK button
Ú
The display shows
H/SNAME
Press the PHONE/ OK button
Ú
The display shows the current name.
Press the HANG UP/ C button to delete
characters from the current name, then key
in your chosen name
The name can have up to eight characters
(including spaces). To find out how to key in
letters using the keypad, see page 21.
6
7
Press the PHONE/ OK button
Press the HANG UP/ C button to go back to
standby mode
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
■
Rin g er m elod ies an d volum es
Base un it
rin g er
1
Press the PHONE/OK button
Ú
The display shows
PHONEBOOK
■
2
3
Press the
Press the
■
button to go to
BS RINGER
PHONE/OK button
The display shows BS VOLUME
Ú
4
5
Press the
PHONE/OK button
The display shows the current volume
Ú
level and the base rings.
■
■
■
Press the
volume level
or
button to go to the
you prefer.
■
to
1 3
q
6
7
Press the PHONE/OK button
Ú
BS
VOLUME
The display shows
■
■
▼
Press the
or
button to display
▼
BS MELODY
8
Press the PHONE/OK button
The display shows the current melody
Ú
and the base rings.
■
■
▼
9
Press the
melody
or
button to go to the
you prefer.
▼
to
1 3
q
10
11
P re ss the P HO NE/ O K button to confirm
the cha nge
P re ss the HANG UP/ C button to go ba ck to
standby mode
12
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Ringer melodies and volumes
Han d set
rin g er
1
2
3
4
Press the MENU button
Ú The display shows
PHONEBOOK
Press the ■ button twice
■
Ú
The display shows
HS
RINGER
Press the PHONE/ OK button
Ú
The display shows
HS
VOLUME
Press the PHONE/ OK button
Ú
The display shows the current volume level
and the handset rings.
■
■
5
6
Press the ■ or ■ button to go to the
volume level
) you prefer
or OFF
3
(
to
1
Press the PHONE/ OK button
Ú
The display shows HS
VOLUME
■
7
8
Press the ■ or ■ button to display
MELODY
■
■
HS
Press the PHONE/ OK button
■
Ú
The display shows the current melody
and the handset rings.
■
■
9
Press the ■ or ■ button to go to the
melody(
1 to 8
) you prefer
10
11
Press the PHONE/ OK button to confirm
the change
Press the HANG UP/ C button to go back to
standby mode
To switch the handset’s ringer off temporarily:
Press and hold the Ü button for 2 seconds
■
Ú
While the ringer is off,
is shown on the
display. Press and hold the same button to switch
the ringer on again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Makin g & an sw erin g calls
To m ake a
call
1
2
Key in the telephone number
If you make a mistake, press the HANG UP/ C
button to clear digits from the display.
Press the PHONE/ OK button
Note: you can press the PHONE/ OK button to
get Dial tone before you key in the number if
you prefer. But that way, you won’t be able to
correct any dialling mistakes.
To an sw er a
call
When there’s an incoming call, the handset
CALL
rings.
appears on the display.
If you subscribe to Caller Display (page 19), the
caller’s number may be shown. If the number is
stored in your handset’s Phone Book, the
caller’s name may be shown.
Press the PHONE/ OK button to answer
■
■
To en d a call
Press the HANG UP/ C button
Or simply replace the handset on the base
unit or charger pod
Make sure the symbol disappears from the
top line of the handset’s display.
Earp iece
volum e
During a call, to adjust the volume:
■
■
Press the ■ or ■ button
■
Ú
Each time you press the ■/■ button, the
volume changes by one step. The volume level
(
to ) is shown on the display. After you end
1
3
your call, the volume will stay at that level.
14
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Making & answering calls
To mute the microphone during a call so the
person on the other end can’t hear you:
Mut in g t h e
m icrop h on e
Press and hold the #/ MUTE button for
2 seconds (press and hold again to un-mute)
■
Ú
The display shows a ‘Mute’
the microphone is muted.
symbol while
The 10 most recent numbers you dialled (up to
20 digits each) are stored for redialling. To call
one of these numbers:
Last Num b er
Red ial
Press the Red ial button once
1
Ú
The most recently dialled number is shown
on the display.
■
■
Press the ■ or ■ button to go to the
number you want
2
3
Press the PHONE / OK button to dial the
number
To delete an
entry from
the Redial list
1
2
Display the number using steps 1 and 2 above
Press the MENU button
■
■
3
4
Press the ■ or ■ button to display
DELETE
Press the PHONE/ OK button to d elete the
entry
To delete all
entries from
the Redial list
1
Press and hold the Red ial/ CDS button to
open the Redial list
2
3
Press the MENU button
■
■
Press the ■ or ■ button to display
DELETE ALL
Press the PHONE/ OK button
4
5
Ú
The display shows
DELETE ALL?
Press the PHONE/ OK button to delete all
entries or the HANG UP/ C button to cancel
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Usin g t h e Ph on e Book
You can store up to 40 names and numbers in each
handset’s Phone Book. Each name can have up to 10
characters (including spaces) and each number can
have up to 2 digits.
0
To st ore
n am es an d
n um b ers
1
2
Press the MENU button
Press the PHONE/ OK button twice
Ú
_
The display shows
NAME
3
4
Key in the name* then press the PHONE/ OK
button
Key in the number then press the
PHONE/ OK button
Ú
The name and number are stored in memory,
the dispaly shows
for new entry.
ADD
5
When you’ve finished, press the HANG UP/ C
button to go back to standby mode
* For details of how to key in letters and other
characters, refer to page 21.
To call a
st ored
n um b er
1
2
Press the PHONE BOOK button
The display shows the first entry.
Ú
■
■
Press the ■ or ■ button to go to the entry
you want.
Or, use the digit keys as a short-cut to entries
beginning with the corresponding letters.
Press the PHONE/ OK button to dial the
number
3
16
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Using the Phone Book
button to open
Press the PHONE BOOK
the phonebook
To m od ify
(ch an g e) a
Ph on e Book
en t r y
1
2
■
■
Press the ■ or ■ button to g o t o t h e
entry that you want
then the ■ or ■
MODIFY
Press the MENU
button to display
3
4
Press the PHONE / OK button
Ú
Modify the name if necessary - Use the
button to delete characters.
HANG UP/ C
5
Press the PHONE / OK button
Ú
Modify the number if necessary.
Press
change
button to confirm the
6
7
PHONE/ OK
When you’ve finished, press the HANG UP/ C
button to go back to standby mode.
To d elet e a
Ph on e Book
en t r y
1
2
PHONE BOOK
p h on eb ook
Press the
b utton to op en th e
■
■
Press the ■ or ■ button to g o t o t h e en t ry
that you want
Press the MENU
display DELETE
3
4
then the ■
or ■ button to
■
■
Press the PHONE/ OK
button to confirm
Ú
The entry is deleted. The display shows
DELETE
for next entry.
When you’ve finished, press the HANG UP/ C
button to go back to standby mode
5
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Using the Phone Book
To d elet e all
Ph on e Book
en t ries
1
2
Press the
th en MENU b utton
PHONE BOOK
■
■
Press the ■ or ■ button to display
DELETE ALL
3
4
Press the PHONE/ OK button
Ú
The display shows
CONFIRM?
Press the PHONE/ OK button to delete
all entries
(or p ress the HANG UP/ C button
to cancel)
Ú
The display goes back to standby mode.
To st ore a
n um b er
from t h e
Red ial list
1
2
Press the Red ial button once then the
■ or ■ button to go to the number
■
■
Press the the MENU button
Ú
The display shows
COPY
TO PB
3
4
Press the PHONE/ OK button
Key in a name then press the PHONE/ OK
button
Ú
The number appears with the cursor at the end.
Press the PHONE/ OK button
You can edit the number (using HANG UP/ C)
before storing it if you wish.
5
6
Press the the PHONE/ OK button
Ú
The number is stored.
7
Press the HANG UP/ C button to go back to
standby mode
18
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Caller Disp lay on t h e h an d set
This network feature lets you see the phone numbers of
your callers on the display, before you answer. To sub-
scribe to Caller Display, all you need to do is contact the
company that supplies your telephone line.
When you have new Caller Display records, the display
shows the
symbol.
Exam p les of
Caller Disp lay
record s
A call from someone whose name
and number are stored in your
Phone Book.
The call was received on 14th June
at 8:25 am.
DAVID
08-25
14-06
Press
or
button on the
h an d se t if you want .
to check the
number.
A call from someone whose name
and number are not stored in your
Phone Book.
The call was received on 14th June
at 8:25 am.
0207321987
08-25
14-06
A call from someone who withheld
their number by dialling 141 (or
whose service provider withheld
their number).
PRIVATE
14-06
08-25
A call from someone whose
number is unavailable (for
example, an international call).
unKNOWN
08-25
14-06
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Caller Display on the handset
Press and hold the Red ial/ CDS button
Or simply press button
To ch eck
Caller Disp lay
record s
1
2
■
Ú The display shows the most recent record.
■
■
Press the ■ or ■ button to scroll through
the records
To ret urn a
call
1
2
1
Display the Call Display records as described
above steps
Press the PHONE / OK button to dial the number
Display the Call Display records as described
above steps
To d elet e a
Caller Disp lay
record
2
3
Press the MENU button
■
■
Press the ■ or ■ button to display
DELETE
Press the PHONE/ OK button
4
Ú
The entry is deleted. The display shows the
next entry.
When you’ve finished, press the HANG UP/ C
button to go back to standby mode
5
1
To d elet e all
Caller Disp lay
record s
Press and hold the Red ial/ CDS button to
open the Caller Display list
2
3
Press the MENU button
■
■
Press the ■ or ■ button to display
ALL
DELETE
4
5
Press the PHONE/ OK button
CONFIRM?
Ú
The display shows
Press the PHONE/ OK button to delete all
records (or the HANG UP/ C button to
cancel)
Ú
The display goes back to standby mode.
2
0
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Caller Display on the handset
To st ore a
1
2
Press and hold the Red ial/ CDS button then
p ress the ■ or ■ button to go to the number
n um b er
in t h e Ph on e
Book
■
■
Press the the MENU button
Ú
The display shows
TO PB
COPY
3
4
Press the PHONE/ OK button
Key in a name then press the
button
PHONE/ OK
The number appears with the cursor at the end.
Ú
You can edit the number (using
before storing it if you wish.
HANG UP/ C)
Press the the PHONE/ OK button
The numberisstored, the display goes back to
the caller display record.
5
6
Press the HANG UP/ C button to go back to
standby mode
How t o key in let t ers an d ot h er ch aract ers
Press the button a number of times to display the character you want. Then
wait a moment until the cursor (flashing bar) moves to the next position.
ghi 4
_
PQQRS7
1
2
3
0
space
ABC2
dEF3
1
4
5
7
8
9
JKL5
MNO6
TUV8
6
W X Y Z 9
+ - .+
0
*
*
For example, to key in
then press 3 twice.
, press 5 once, press 2 once, press 6 twice
JANE
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Usin g a m ult i-h an d set syst em
If you have a Symphony 2210 multi-handset system,
you already have more than one handset registered
to your base unit. You can register additional handsets
- up to Five per base unit. With two or more handsets,
you can:
•
•
•
make in t ercom calls from one handset to another.
t ran sfer an outside call from one handset to anther.
set up a three-way con feren ce call.
Each handset’s number( 1 to ) is shown on its display.
5
Only one handset can be connected to the outside
!
line at once.
If you try to make a call while another
handset is
heard.
already on the line, an alerting tone is
To p ag e all
h an d set s
Press the HANDSET LOCATOR button on
the base unit
■
Ú
All registered handsets ring, and their
displays show<PAGING>>
To stop the ringing:
Press the HANDSET LOCATOR button again,
or press any button on any handset
■
22
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Using a multi-handset system
Press the INTERCOM button on the handset.
The display show CALL IN T briefly, then
the numbers of any other handsets registered to
the base.
In t ercom
call from t h e
h an d set
1
2
ꢀ
Press the appropriate number to select
and call that handset
ꢀThe other handset rings, and its display shows
# (where # is the number of the number
IN T
of the calling handset).
When the other handset user answers, you’ll
be connected.
To answer the intercom call:
When someone makes an intercom call to you,
Press the PHONE/ OK button on the ringing
handset to answer.
3
4
To end the intercom call:
On either phone, press the HANG UP/ C
button on the handset, or replace on the base
unit or charger pod.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Using a multi-handset system
To t ran sfer
a call
1
2
Make or answer an outside call using the
handset
Briefly press the INTERCOM button then key
in a handset number
Ú
The outside call is put on hold. When the
user of the other handset unit answers, you
can talk on an intercom call.
Press the HANG UP/ C button to transfer
the call
3
If the handset user does not answer
,
you can get back to the outside call by
pressing the INTERCOM button again.
You can press the HANG UP/C to transfer the
outside call before the other handset user answers.
■
24
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Using a multi-handset system
Th ree-w ay
con feren ce
When you have an outside call (either one
you’ve made or answered, or one that’s been
transferred to you) in progress —
1
2
Press the INTERCOM button then key in a
handset number
Ú
The outside call is put on hold.
When the other handset user answers, and you
have an intercom call in progress:
Press and hold the *(ASTERISK) button to
set up a three-way conference
Ú
Both you and the other user are connected
to the outside call.
If you press HANG UP/ C during the conference
call, you’ll leave the other user connected to
the outside call.
If the other user presses HANG UP/ C, you’ll be
left connected to the outside call.
When both handsets are on an intercom call and
an outside call comes in,you will hear NEW CALL
TONE over your conversation to tell you that
someone is calling you.
New call
t on e
To answer the outside call and end the intercom call:
Press the
R
button
To answer the outside call and the established
intercom call.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
An sw erin g m ach in e - Quick Ref
Bu t t o n s t o p r e ss...
o n t h e h a n d se t
long pre s s a t idle mode
S witch to TAM mode
P la y me s s a ge
S top to pla y
me s s a ge
(while me s s a ge
pla yba ck)
Ba ck to pre vious
me s s a ge
(while me s s a ge
pla yba ck)
S kip to ne xt
me s s a ge
De l curre nt
me s s a ge
(while me s s a ge
pla yba ck)
(while me s s a ge
pla yba ck)
Adjus t volume
26
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
An sw erin g m ach in e - Basis use
The Symphony2210 is supplied with answering machine
that will allow the caller leave a message after the
machine play a predefined message.
Switch answer
machine on
and off
Press the MENU button
1
2
■
TAM
then PHONE/ OK button to select
Press the
■
■
The display shows PLAY
Ú
Press the
button to go to
ON /
OF F
AN S
■
3
Press the PHONE/ OK button
4
5
Press the
■
and
button to select
or ON
OF F
■
■
■
to confirm
and then using PHONE/ OK
button to exit the menu
Press HANG UP/ C
6
If the machine is switched on,the message indicator is turn
Ú
on and displays relevant message related to an answer
machine operation. The
display.
symbol appears on handset
Ú
The message indicator is off and handset
symbol
disappear when the machine is turn off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
The Symphony2210 has two answering modes,
Answering
modes
and ANS/REC mode.
ANS ONLY#
–
this invites callers to leave a message.
This mode is switched on by default
and will remain on unless you change
mode.
ANS/REC
– this simply asks callers to try later and
ANS ONLY#
does not give them the opportunity to
leave a message.
To change
answering
mode
Press the
Press the
button
MENU
1
2
▲
then PHONE/ OK button to
▲
▲
TAM
select
The display shows
Ú
PLAY
Press the
button to go to
▲
ANS MODE
3
4
Press the PHONE/ OK button
or
Ú
The display showsANS/REC
ANS ONLY
▲
▲
Press the
mode and then
▲
and
button to select the new
▲
5
press the PHONE/OK to confirm
Ú
The display shows OGM defined
PREDEFINEd
PERSONAL, to indicate whether you want to use
the predefined message or you own personally recorded
message.
or
6
Press the PHONE/ OK button
The display shows PLAy
msg
and the handset
Ú
plays the OGM through loudspeaker.
* Turn to page to set up the outgoing message if
you select outgoing message.
7
PERSONAL
28
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
Outgoing
messages
(OGMs)
OGM is what callers hear when the machine answers.
The Symphony 2210 has two predefined outgoing
messages (OGMs), one is for use in ANS/REC
mode, it is pre-defined as “Sorry — we cannot
answer your call now. Please leave your message
after the beep”, another is for
ANS.
mode,
ONLY
it is pre-recorded as “Please call later”.
Both of these can be replaced with your own
personalised message if you prefer.
To record your own outgoing message you must first
follow the procedure set the answer mode.
Follow setps 1 to 5 on page 28
1
2
To record a
new outgoing
message
▲
▲
Press
■
and
■
button to select
PERSONAL
PHONE/OK button
then press the
Ú
PLAY
MSG
The display shows
Press the PHONE/OK button to play the
existing outgoing message if you have
3
4
Or, press the
■
and
button to
button to
■
RECORD
▲
▲
Msg
then press
record a new
PHONE/OK
outgoing message
The display shows
Ú
RECORD
MSG
5
6
Speak clearly into handset
Press the
recording
Ú
PHONE/OK button to end the
The machine will playback the OGM automaticly,
and the display shows
PERSONAL after playback.
button twin to play the
Press the
PHONE/OK
7
outgoing message again.
new
If you are not happy with the result repeat steps
4 and 6.
8
Using HANG UP/C button to exit the menu
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
The Symphony 2210 will allow you to record a memo
To record
a memo
that can be replayed with messages. This can be
useful if you want to leave a message for other users
of the phone.
1
2
Press the MENU button
Press the
■
button display
TAM
then press the
and seclect it
▲
PHONE/OK button
▲
▲
3
■
■
Use and to go to
REC MEMO
using PHONE/ OK button
Ú
The display shows
after the “beep”.
RECORDING
Speak clearly into handset
4
5
As soon as you' ve finished speaking, press the
PHONE/ OK button to stop recording.
You memo is recorded.
Ú
6
Using HANG UP/C button to exit the menu
30
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
When there are new messages and/or memos waiting,
the message indicator on base flashes and shows you
To play your
Messages and
Memos
how many;
The symbol
is blinking on handset
display. Memos are counted as messages,
1
2
Press the MENU button
Press the
the PHONE/ OK button
■
button to display
TAM
then press
■
■
3
PLAY
The dis pla y s hows
te lls y ou how ma ny ne w me s s a ge s you ha ve .
Select
manu
using PHONE/ OK button
a nd the ma chine
Ú
PLAY
** You can use the Q uick Ref list on page 26.
4
5
Or s top pla yba ck by pre s s ing
HANG UP/ C b u tto n .
Press and hold the HANG UP/ C button to go
back to standby mode
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
While
a
caller is leaving
a
message, you can listen
Call Screening
over the loudspeaker when the call screening is
set to on.
1
2
MENU
Press the
button
Press the
▲
button display shows
TAM
▲
▲
▲
then press the PHONE/ OK button
▲
▲ꢀ
Press and button to go to
SETTINGS
3
4
then press the PHONE/ OK button
▲
▲
▲
▲ꢀ
Press and button to go to
HS
SCREEN
then press the PHONE/ OK button
▲
▲ꢀ
Press and button to select
then press
ON
▲
▲
5
the PHONE/ OK button to confirm
While the m achine
you can pick up the call and talk to
i
r
s
ecording an incom ing m essage,
the caller, b y
pressing the
MENU
button on any registered
cordless handset while the handset's display
shows RECORDING .
You can talk as you norm ally do using the
handset on
a
call, the m achine will stop
recording the caller's m essage.
32
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine-Basis use
After you' ve listened to your messages, remember
to delete them. Otherwise, the memory may
become full.
To d elet e
in d ivid ual
m essag e
Simply press the 6 button while the message
is playing
* Whether this is a new message or an old message
( one you've listened to before) it will stop being
deleted immediately.
played, and will be
To d elet e all
old m essag es
1
2
Press the MENU button
Press the button display shows
■
■
TAM
then press the PHONE/ OK button
■
■
■
3
■ꢀ
Use and to go to
and select
DELETE ALL
it using PHONE/ OK button
Ú
The display shows
CONFIRM?
4
5
Press the PHONE/ OK to delete all recorded
messages
Press the HANG UP/ C button to go back to
standby mode
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Composite Default screen
An sw erin g m ach in e - Rem ot e use
The Symphony 2210 will allow you to check your message
remotely from another phone. To use this function you must
call using a tone dialing telephone and you will need to enter
your Symphony 2210 master PIN. The remote control function
must be activated before it can be used.
1
2
To act ivat e
rem ot e
con t rol
Press the MENU button
■
Press the
■
button display shows
TAM
then press the PHONE/ OK button
■
■
■
and select it
■
Use and to go toSETTINGS
3
4
5
using PHONE/ OK button
■
and select it
ACCESS
■
Use and to go to REM
■
■
using PHONE/ OK button
■
■
Use and to go to select
then
ACTIVATED
■
■
press the PHONE/ OK button to activate remote
control
Press and hold the HANG UP/ C button to go
back to standby mode.
6
Rem ot e
operat ion
Using a tone dialing phone,dial your home number
When you hear you outgoing message, press
1
2
3
Key in your remote PIN (default is 0000) within 3
seconds.
Ú
You will hear a long beep tone, press
2
, the machine
tells you how many new messages you have and then the
messages will be played automaticly.
34
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine — remote use
... Remote
operation
4
Once the message have been played you can use
the buttons listed on below table
If you stop pressing the buttons within 15 seconds , your
Ú
Symphony 2210 will hang up.
Cod es t o use d urin g rem ot e op erat ion
Switch answering machine on/ off
Play/ Stop
0
2
1
3
6
Back to previous message
Skip to next message
Current message to be deleted
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
An sw erin g m ach in e - Ad van ced use
You can adjus t the number of rings that sound before the
machine answers the call. The machine can be set to answer
calls after three to eight rings. If you don’t set a number,
it will answer after five rings.
To set the
ring delay
If you have a network answer machine service set with
your line provider (1571 service) and you wish your
telephone to answer your calls then you must
!
1) Disable the network answer service. OR,
2) Set the answer machine rings to five or less.
1
2
Press the MENU button
Press the
▼
button display showsTAM
■
then press the PHONE/ OK button
▼
■
■
▼
then
Use
and
to go to
SETTINGS
3
button twice.
press the PHONE/ OK
Ú
The display shows
5 RINGS
▼
■
■
Use and
▼
between
to go to
to
adjust the delay rings
4
or
3 RINGS 8 RINGS
See next page If you select TOLL
TOLL
SAVER
SAVER
Ú
Press the PHONE/ OK button to confirm the new
setting
5
6
Press and hold the HANG UP/ C button to go
back to standby mode
36
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Answering machine — Advanced use
If you check your message remotely, you can set Toll
Saver - the machine will answer after two rings if there
are new mes s ages ; after five rings if there are
no new mes s ages . S o, if it has n’t answer after
Toll saver
three rings, you can hang up to save the cost of the
call.
Go to the steps 4 on page 36 to display
TOLL SAVER
1
2
3
Press the PHONE/ OK button to select
When you’ve finished, press and hold the
HANG UP / C button to go back to standby mode
When memory is full, the machine will not seize the line
even if there is incoming call, memory full condition occurs
when digital memory has been filled. The machine's memory
has room for about 15 minutes of recording time (included
OGMs and memos), or up to 59 individual messages.
When the
memory
is full
ANS ONLY#
The machine switch to
allow the callers to leave message.
mode and doesnt'
When you have deleted messages to make room, the
machine will automatically switch back on.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Cust om ise your p h on e syst em
The Symphony 2210 can be customised to suit your
preferences in number of ways .Some of these functions
have been covered earlier in this User Guide. This section
is roundup of items that have not yet been mentioned.
Han d set n am e
Key t on e
See page 11.
Normally, each time you press a button on the handset,
you hear a tone. Y ou can turn this off if you prefer.
▲
▲
Press the MENU button th en th e
to go to
or
b utton
button
▲
1
2
HANDSET
Press the PHONE/ OK then the
to go to KEY TONE
or
▲
to select (cross) or
X
v
Press the PHONE/ OK
(tick) to switch key tone off or on
3
4
Press and hold the HANG UP/ C button to go
back standby mode
To select the language of information on the
display.
Disp lay
lan g uag e
1
2
▲
▲
Press the MENU button th en th e
to go to
or
b utton
HANDSET
Press the PHONE/ OK then the
or
button
▲
▲
to go to
LANGUAGE
▲
▲
Press the PHONE/ OK button and select the
3
4
▲
LANGUAGE
▲
Use or button
Press the PHONE/ OK button to confirm the
change
By selecting this option you return the Handset to
HS default settings
Han d set
d efault
▲
▲
Press the MENU button th en th e
to go to
or
b utton
1
2
DEFAULT
Select it using PHONE/ OK b utton
The display shows
Ú
CONFIRM?
to confirm
3
Press the PHONE/ OK
38
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Customise your phone system
This is the system PIN --
a
four-digit code you may
need if you want to register new handsets to your
base unit or access your answering machine remotely.
PIN cod e
The default PIN is 0000; you can change it to any
four-ditgit number you'll remember.
the
or
button
to go
Press the MENU then
to
1
▲
▲
BASE
Press the PHONE/ OK button twice
The display shows
PIN is still at default 0000, it will skip this input.
Ú
PIN
CODE
. If the current
2
3
Key in the current PIN and confirm using
PHONE/ OK button
Ú
The display shows
NEW PIN
Key in the new PIN and confirm using
PHONE/ OK button
4
5
Ú
The display shows NEWPin
Key in the new PIN again and confirm using
PHONE/ OK button
ÚThe PIN code is changed after ‘beep’.
(If you key in a wrong PIN code on step, the display
will exit the setting, you have to repeat above steps.)
You should norm ally leave the this setting at
Dial m od e
TONE, but if you use the phone as an extension
on
a
PBX, you m ay need to change to PULSE.
Press the MENU button, then
the
or
button
■
■
1
2
to go to
BASE
or
Press the PHONE/ OK button then
button to dial mode
■
■
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Customise your phone system
... Dial mode
3
the
or
Press the PHONE/ OK button, then
TONE
■
■
button to select PULSE or
Press the PHONE/ OK button to confirm the
setting changed
4
Flash (recall)
t im in g
It's very unlikely that you'll need this function, and it's
usually best to leave the setting at its default SHORT
.
But if your Symphony 2210 is connected to an extension
on a PBX, you may need to change this setting ( also called
the recall length) to If applicable, consult the PBX
LONG
documentation for details.
the
or
button
to
Press the MENU then
go to BASE
▲
▲
1
2
3
Press the PHONE/ OK then
to select FLASH
the
or
button
▲
▲
Press the PHONE/ OK button
SHORT
The display shows
Ú
■
■
4
Using the
or
button to select the flash
▲
▲
LONG
SHORT
MEDIUM or
time between
,
Press the PHONE/ OK button to confirm the
setting changed
5
40
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Customise your phone system
By selecting this option,you return the Base
unit to its default settings,
Base d efault
1
Press the MENU then the or
to go to
▼
▼
DEFAULT
Select it using PHONE/OK button
2
3
The display showsCONFIRM?
Ú
Press the PHONE/OK button to confirm
BASE PIN
Ú
The display shows
Key in the current PIN and confirm using
PHONE/OK button
4
The display shows
your phone unit is default after
and
‘beep’.
WAITING...
Ú
Default
set t in g s
The default values are setting as follows
■
Keypad unlocked
Redial list - empty
■
Caller Display record - empty
Earpiece volume – level 3
Handset ringer Volume – 2; Melody-4
Base unit ringer volume – 2; Melody-1
Keytone - ON
■
■
■
■
■
■
■
■
Handset name – BINATONE
Language - English
Dial mode - Tone
Flash time – Short
■
■
System PIN - 0000
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Han d set reg ist rat ion
The handsets supplied with your Symphony 2210
system are already registered to the base unit. You
don’t need to register them yourself.
If you buy new handsets separately, you’ll need to
register them. Up to FIVE handsets can be registered to
each base unit; but each handset is registered to one
base unit only.
To reg ist er a
n ew h an d set
(Or to re-register an existing handset that has
accidentally become de-registered).
Make sure the handset you’re registering is in
standby mode.
1
Press and hold the HANDSET LOCATOR
button on the base unit until you hear
Registration tone (slow ‘beeps’)
On the handset, press the MENU button,
then the ■ or ■ button to display REGISTER
2
■
■
Press the PHONE/ OK button
3
4
Ú
The display shows
PIN
BASE
Key in the system PIN (default 0000) and
press the PHONE/ OK button
Ú
a few moment,
for
The display shows
WAIT
The handset is registered to the base unit
while you hear two 'beeps' from the base
unit.
Ú
The display should show the handset's
name and number, you can change the name
as described on page 11.
42
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Handset registration
To register to
a different brand
of base unit
Your Symphony 2210 handset can be registered to any
GAP-compatible base unit; or you can register other GAP-
compatible handsets to your Symphony 2210 base unit.
But we do not guaratee that all features or display
message will be available using other manufacturer’s
equipment.
!
1
Follow the instructions in the base unit’s User Guide to
put the base unit into registration mode (for example,
steps7 on page 42) .
2
Follow the instructions in the handset’s User Guide to
register the handset (for example, steps 1 to 5 on page 42).
If you need to enter a PIN for the base unit, refer to the
base unit’s User Guide
Be careful about using this function — if you
de-register a handset by mistake, you’ll need to
re-register it to the base unit.
To d e-reg ist er
a h an d set
Press the
MENU then the
■
or
■
button
1
2
to go to
DELH/S
Press the PHONE/ OK then the
■
or
■
button
to confirm
Ú The display shows
BASE PIN
Key in the system PIN (default 0000) and
confirm using PHONE/ OK button
3
4
ÚThe display shows a list of registered
handset numbers .
Key in a handset number to de-register
The handset is de-registered after 'b' eep'
Ú
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Disabled
Composite Default screen
Troubleshooting
The DECT Phone must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
!
ALWAYS check
first that:
■
you have followed all the steps listed on pages 5 to 7
to install and set up your DECT Phone
■
■
■
all connectors are firmly inserted in their sockets
mains power is switched on at the socket
the handset’s batteries are correctly and securely
installed, and are not run down
Everyday use
“I cannot make
or answer calls.”
If the handset’s display is blank, it may be switched off.
Press the HANG UP/C button to switch it back on.
Check that the base unit’s mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your DECT Phone. Other telephone
line cables might not work.
Move the handset closer to the base unit.
Check the Battery Level symbol on the display. If it’s
low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off power at the mains socket, wait for a
minute and then switch back on. This may help.
“My answer
Check
the following :
machine is not
answering calls”
1) Your answer machine is switched on and set to
answer mode.
2) If you have a network answer machine service set
with your line provider (1571 service) and you wish
your telephone to answer your calls then you must,
44
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Disabled
Composite Default screen
Troubleshooting
disable the network answer service Or set the
answer machine rings to five or less.
“I cannot make
a call.”
The handset’s keypad may be locked (see page 9).
Unlock it before you make a call.
“When I press
keys, nothing
happens.”
Make sure the batteries are correctly fitted in your
handset. If the ‘battery charge level’ symbol on the
display shows ‘low’, recharge the batteries.
“When I key in a Try moving the handset closer to the base unit.
number, it
Try a different position for the base unit — somewhere
appears on the
higher if possible, or further from other electrical
display, but I
equipment.
can’t make an
outside call.”
If you have more than one registered handset, make
sure another handset isn’t already using the line.
“The phone
does not ring”
Check that the base unit’s mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone
— not just for charging the batteries.
Make sure you’re using the telephone line cable that
was supplied with your DECT Phone. Other telephone
line cables might not work.
Check that the total REN value of all equipment
connected to your telephone line is no more than 4
(see page 3). Disconnect one or more telephones and
see whether that helps.
“There is inter-
ference and
noise on the
line.”
Move the handset closer to the base unit, or to a
different position.
Try moving the base unit so that it’s not near other
electrical equipment, such as a television or a
computer.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Disabled
Composite Default screen
Troubleshooting
You’ll get the best results if you site the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
“My call was cut
Move the handset closer to the base unit before you try
off when I went again to make a call.
out of range.
Now I can’t use
my handset.”
“I hear ‘beeps’
from my
You may be going out of range of the base unit. Move
closer, or your call may be cut off.
handset while
I’m on a call.”
Check the ‘battery charge level’ symbol on the display.
If it is low, recharge the batteries.
“The Caller
Display feature
isn’t working.”
You need to subscribe to the Caller Display feature.
Contact your service provider.
The caller may have withheld their number.
Or they may be calling from a network that does
not transmit the Caller ID (for example, it may be an
international call).
“When I try to
make a call, I
hear Busy
If you have more than one handset registered to your
base unit, make sure that another handset isn’t already
using the line.
tone.”
“The volume in
the earpiece is
low when I’m
on a call.”
Make sure you’re holding the earpiece correctly over
your ear.
Adjust the volume using the
or
button.
▲
▲
46
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Disabled
Composite Default screen
Troubleshooting
Using a multi-handset system
“I can’t transfer
a call.”
Make sure the other handset is in range of the base unit.
Make sure you’re dialling the correct number for the
other handset (1 to
5
)
.
Batteries
“The handset‘s
batteries are
running low
within an
Before you first used the handset, you should have left it
on the base unit or charger pod for up to 15 hours to
charge the batteries fully.
You may need to replace the batteries (see below).
hour or two.”
Clean the battery charging contacts on the base unit
with a dry cloth.
Check the connections between the base unit and the
mains power socket.
“I try to
You need to replace the batteries. To find out how to
obtain replacements, call 0845 345 9677, between
9.00 am and 5.00 pm, Monday to Friday.
recharge the
batteries, but I
still get a
warning that
they are low.”
Dispose of used batteries safely — never burn them,
or put them where they could get punctured.
ALWAYS use the batteries supplied with your
Symphony 2210 — other batteries may burst, causing
damage.
PBX use
“The Recall
function doesn’t
seem to work.”
You may need to change the recall signal length from
its default short. Consult your PBX documentation for
help if necessary. To change the recall setting, please
see page 40
.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Disabled
Composite Default screen
Troubleshooting
“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the Last
Number Redial button until a P appears on the display.
This inserts a pause between the access code and the
telephone number. You should later be able to redial
the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press and hold
the
Last Number Redial button for a pause
between the access code and the number.
If the fault persists …
Disconnect all other instruments connected to the
same line as the Symphony 2210 and see whether you
can make a call.
Disconnect the base unit from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider.
If you still cannot identify the cause of the problem,
contact the Help Line on
.
0845 345 9677
48
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Clean in g an d care
■
Don’t clean any part of your Sym phony 2210 with
benzene, thinner or other solvent chemicals — this may
cause permanent damage which is not covered by the
Guarantee. When necessary, clean it with a damp
cloth.
■
■
Keep your Symphony 2210 away from hot, humid
conditions or strong sunlight, and don’t let it get
wet.
Every effort has been made to ensure high standards of
reliability for your Symphony 2210. However, if something
does go wrong, please do not try to repair it yourself
— consult your supplier or the Binatone Help Line.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Guaran t ee an d ser vice in form at ion
This product is guaranteed against manufacturing defects
for a period of 1 Year.
This does not cover the product where the fault is due to
misuse, abuse, use in contravention of the instructions,
or where the product has been the subject of unauthorised
modifications or alterations, or has been the subject of
commercial use.
In the event of a problem with the product within the
guarantee period please return it to your nearest Argos store.
If the item is shown to have had an inherent defect present at
the time of sale, the store will provide you with a replacement.
Your statutory rights remain unaffected.
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
50
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Tech n ical d et ails
Standard
Digital Enhanced Cordless
Telecommunications (DECT)
Frequency range 1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel bandwidth 1.728 MHz
Operating range up to 300 m outdoors; up to 50 m
indoors
Operating time
for cordless
handset
standby: 100 hours approx.
talking:10 hours approx.
battery charge time: 15 hours
o
Operating 0 oº C to 40 º C
Temperature
range
o
Storage -20oº C to 60 º C
Electrical power Cordless handset — three AAA-size
550 mAH Ni-MH rechargeable batteries
Base unit — input 230 V AC, 50 Hz; output DC 7.5 V, 300 mA
Charger pod — input 230 V AC, 50 Hz; output
AC 9 V, 300 mA
Port specification The
port (connected to the mains
power supply) is a SELV port with respect to EN41003.
The port (connected to the telephone line) is a TNV
port with respect to EN41003.
PBX compatibility Timed break recall: programmable as
Short (recommended for most PBX system), Medium or Long.
Pause length: 3 seconds. Signalling type: DTMF (dual-tone
multifrequency), also called tone dialling; or Loop-Disconnect,
also called pulse dialling.
Network connection
This equipment is intended to be used in the UK only.
Operation on other countries’ PSTN termination points
cannot be guaranteed.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
BINATONE TELECOM PLC
UNIT 1, PONDERS END INDUSTRIAL ESTATE
EAST DUCK LEES LANE, ENFIELD
MIDDLESEX, EN3 7SP UNITED KINGDOM
Tel: +44(0) 20 8344 8888 Fax: +44(0) 20 8344 8877
e-mail: [email protected]k
________________________________________
.
EC Declaration of Conformity
We the manufacturer / Importer : Binatone Telecom Plc
Unit1, Ponders End Industrial Estate
East Duck Lees Lane, Enfield,
Middlesex EN3 7SP
United Kingdom
Declare under our sole responsibility that the following product
Digital cordless telephone
Symphony 2210 series
China
Binatone
Type of equipment:
Model Name:
Country of Origin:
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Member States relating to Radio Spectrum Matters, the
Council Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC) and the European Community Directive
2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
Radio Spectrum:
EMC:
EN 301406: V1.5.1:2003;
EN 301489-1:V1.6.1:2005;
EN 301489-6:V1.2.1;2002;
EN 60950-1:2001+A11：2004。
Electrical Safety:
Manufacturer / Importer
(signature of authorized person):
23 Mar 2007
Date
Paul Tsui(General Manager)
52
Binatone Help Line: 0845 345 9677 (Local Call rate)
Download from Www.Somanuals.com. All Manuals Search And Download.
Color profile: Generic CMYK printer profile
Composite Default screen
Waste electrical products must not be disposed of with
household waste. This equipment should be taken to
your local recycling centre for safe treatment.
Binatone Telecom plc operates a policy of continuous product
improvement, and so reserves the right to make changes to
the product and functions without notice.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
|