ULTRA TREMOLO UT100
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA
TREMOLO UT100. This high-quality effects pedal is designed to provide guitarists easy-
to-use tremolo effect styles. Thanks to its high-performance features you get the classic,
warm and mind-bending tremolo effects of vintage ‘60s amps.
The tremolo effect is achieved by periodic modulation of the input signal level. This results
in a continuous change from low to high level that has a quivering, tremulous sound character.
1. CONTROLS
Top view
The RATE control adjusts the speed of the tremolo effect.
The DEPTH control adjusts the intensity of the effect.
The WAVE control alters the LFO waveform that modulates the input signal from
triangle to square. This way you can achieve practically any tremolo sound, from
classic to radical styles.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
+
The UT100 has no on/off switch. As soon as you insert the jack into the IN
connector, the UT100 begins running. When not using the UT100, remove
the jack from the IN connector. This extends the life of the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
|