Coronis Fusion 10MP
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome!
Thank you for choosing this CORONIS FUSION 10MP display!
Equipped with proprietary 'SmoothGray' technology for a meticulously
rendered grayscale curve, the CORONIS FUSION 10MP display makes subtle
details and lesions more noticeable than ever before. Add to this
exceptionally high brightness and contrast levels, truly dark blacks and
perfect geometry and you begin to understand that supreme grayscale
precision has a new meaning.
Thanks to the seamless 30-inch LCD screen, you can easily compare prior
and current mammography images without the annoyance of a central
bezel. Moreover, it allows you to review X-ray chest images or 40 full-
resolution CT or MR images with superb diagnostic precision on a single
screen.
The integrated I-Guard sensor makes Quality Assurance an easy job.
Combined with the online MediCal QAWeb solution, I–Guard performs
intervention-free DICOM calibrations, Quality Assurance tests and remote
assessment of your display.
Use the instructions in this guide to install your CORONIS FUSION 10MP
display and discover all these interesting features yourself!
Following symbols may be used throughout this guide:
Warning: Risk of
injury to human
beings
Caution: Risk of
damage to the
product
WARNING
Important notice
or remark
Note
Hint, tip
Additional
information
operating your CORONIS FUSION 10MP display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
3
(This page intentionally left blank.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
4
Table of contents
Rear view ..............................................................................................10
Routing the cables................................................................................16
First time starting up............................................................................20
Keys indicator lights .............................................................................23
Keys indicator lights .............................................................................29
Keys sound ............................................................................................30
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
5
DPMS mode...........................................................................................30
Luminance target..................................................................................31
Viewing modes.....................................................................................31
Display functions...................................................................................32
Reading rooms......................................................................................34
Image orientation.................................................................................35
Image scaling........................................................................................36
Video input signals ...............................................................................38
Video timings........................................................................................42
Display info............................................................................................43
Display status........................................................................................43
Front glass .............................................................................................45
Cabinet...................................................................................................46
Safety information................................................................................47
Legal disclaimer....................................................................................55
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
6
What's in the box
Your CORONIS FUSION 10MP display comes with:
• this CORONIS FUSION 10MP display guide
• a system CD
• two DVI cables
• two DisplayPort cables
• a USB cable
• a set of AC power cords
• an external power supply
If you ordered a Barco display controller, it’s also in the box together
with its accessories and dedicated user guide.
Keep your original packaging. It is designed for this display and
is the ideal protection during transport.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
7
(This page intentionally left blank.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
8
Parts, controls and connectors
Front view
1
2
3
4
5 6 7
8
1
3
5
7
2
4
6
8
USB downstream connectors
Right/Down key
Left/Up key
Menu/Enter key
Ambient light sensor
Control wheel
Stand-by/Cancel key
Power status indicator light
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP
9
Rear view
6
7
8
1
2
3
4
5
9
10 11 12
1
3
2
4
USB downstream connector
USB upstream connector
DVI 1 video input
Ethernet connector (see note
below)
5
6
8
DisplayPort 1 video input
Connector compartment
cover
7
9
Neck cover
Display stand cover
DVI 2 video input
10
12
DisplayPort 2 video input
+5 VDC, 0.5 A power output
11
+24 VDC power input
The Ethernet connection is used for maintenance purposes and
is not supported for user application.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Coronis Fusion 10MP
Display installation
Prior to installing your CORONIS FUSION 10MP display and
connecting all necessary cables, make sure to have a suitable
display controller physically installed in your computer. If you are
using a Barco display controller, please consult the user guide
delivered with it to do this.
Removing the covers
CONNECTOR COMPARTMENT COVER
The connector compartment cover should be removed to get access to
the connectors. To remove the cover, proceed as follows:
1 Gently lift the clips at one of the handles of the connector
compartment cover to release that side of the cover.
2 Do the same at the other side of the cover.
3 Remove the cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 11
DISPLAY STAND COVER
To get access to the cable routing channel, the display stand cover
should be removed. This can be done as follows:
1 Gently press and hold the clips at the inside top of the cover.
2 Slide the cover upwards while holding the clips pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Coronis Fusion 10MP
Unlocking the height mechanism
In the factory, the height-positioning system in the display stand is
locked with a red hook to prevent damage during transportation. You’ll
have to remove this hook before adjusting your display height position.
1 While holding the display panel pushed down, pull out the red
hook in the display stand.
To retain the hook for possible future transportation, insert the
short, red end of the hook back into the stand of your display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 13
Adjusting the display position
Now that the height-positioning system of your display is unlocked, you
can tilt, swivel, raise and lower the display as desired.
Do not try to pivot your display when attached to the stand.
Trying to do so could cause serious damage to your display and
its stand.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Coronis Fusion 10MP
Connecting the signal cables
1 Connect one head of the display controller to the DVI 1 or
DisplayPort 1 connector with one of the supplied DVI or DisplayPort
cables.
2 Connect another head of the display controller to the DVI 2 or
DisplayPort 2 connector with one of the supplied DVI or DisplayPort
cables.
Each side of your display can have a different video input
connected (one side can have DVI connected while the
other side has DisplayPort connected). Both display sides
can have the same video input connected as well but
only one video input is allowed on each side of your
display.
3 If you want to make use of your display’s USB downstream
connectors, connect a PC USB downstream connector to the
display’s USB upstream connector by means of the supplied USB
2.0 cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 15
Connecting the power cables
1 Connect the supplied external DC power supply to the +24 VDC
power input of your CORONIS FUSION 10MP display.
2 Plug the other end of the external DC power supply into a
grounded power outlet by means of the proper power cord
delivered in the packaging.
Routing the cables
Route all connected cables trough the cable routing channel in the stand
of your display.
The cable straps at the inside of the connector compartment
allow you to fix the cables for better shielding of the cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Coronis Fusion 10MP
Re-attaching the covers
1 Re-attach the display stand cover by sliding it downward. You’ll
hear a “click” sound of the cover’s clips when the display stand
cover is in position.
Pay attention that all cables stay in the cable channel
while replacing the cover.
2 Re-attach the connector compartment cover by sliding the cover’s
top in position and then push the cover’s bottom. You’ll hear a
“click” sound of the cover’s clips when the connector compartment
cover is in position.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 17
VESA-mount installation
The panel, standard attached to a stand, is compatible with the VESA
100 mm standard. Thus, it can be used with an arm that is approved by
VESA. This chapter shows you how to release the panel from the stand
and how to attach it to an arm. If you’re not using an arm, you can skip
this chapter.
1 Gently pull open both lower sides of the cover.
2 Slide the cover upwards while holding the lower sides pulled open.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Coronis Fusion 10MP
3 Lift the plastic frame that covers the fixation of the panel to the
stand. Turn it for 45 degrees to uncover the fixation screws.
4 Unscrew the four fixation screws fixing the panel to the stand.
5 Attach the panel firmly to the arm using 4 screws M4 x 10 mm.
You should mount the panel in landscape position. Portrait position
is not supported.
Use an arm that can support a weight of at least 18 kg
(39.68 lbs). Failure to do so could make the panel fall,
causing serious injury to a child or adult, and serious
damage to the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 19
First time starting up
You are now ready to start up your CORONIS FUSION 10MP display system
for the first time.
1 Switch on your CORONIS FUSION 10MP display as described in
2 Turn on the computer connected to your display.
If you have properly installed your display and display controller, the
Windows start-up messages will appear once the boot procedure is
finished.
Your CORONIS FUSION 10MP display will be running in a basic
video mode at a default refresh rate when first time starting
up.
If you are using a Barco display controller, please consult the
user guide delivered with it to install the drivers, software and
documentation. When this is done, your display will
automatically detect the connected video input signal(s) and
apply the correct video mode and refresh rate.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Coronis Fusion 10MP
Daily operation
Recommendations for daily operation
OPTIMIZE THE LIFETIME OF YOUR DISPLAY
Enabling the Display Power Management System (DPMS) of your display
will optimize its diagnostic lifetime by automatically switching off the
backlight when the display is not used for a specified period of time. By
default, DPMS is enabled on your display, but it also needs to be
activated on your workstation. To do this, go to “Power Options
Properties” in the “Control Panel”.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
USE A SCREEN SAVER TO AVOID IMAGE RETENTION
Prolonged operation of an LCD with the same content on the same
screen area may result in a form of image retention.
You can avoid or significantly reduce the occurrence of this phenomenon
by using a screen saver. You can activate a screen saver in the “Display
properties” window of your workstation.
Barco recommends setting screen saver activation after 5
minutes of non-usage. A good screen saver displays moving
content.
In case you are working with the same image or an application with
static image elements for several hours continuously (so that the screen
saver is not activated), change the image content regularly to avoid
image retention of the static elements.
UNDERSTAND PIXEL TECHNOLOGY
LCD displays use technology based on pixels. As a normal tolerance in
the manufacturing of the LCD, a limited number of these pixels may
remain either dark or permanently lit, without affecting the diagnostic
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 21
performance of the product. To ensure optimal product quality, Barco
applies strict selection criteria for its LCD panels.
To learn more about LCD technology and missing pixels, consult
medical.
ENHANCE USER COMFORT
Every Barco multi-head display system is color matched with the highest
specification in the market.
Barco recommends keeping color-matched displays together.
Furthermore, it is important to use all displays of a multi-head
configuration at the same rate to preserve color matching
throughout the economic lifetime of the system.
MAXIMIZE QUALITY ASSURANCE
The ‘MediCal QAWeb’ system offers online service for high-grade Quality
Assurance, providing maximum diagnostic confidence and uptime.
Learn more and sign up for the free MediCal QAWeb Essential
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Coronis Fusion 10MP
Keys indicator lights
By default, the keys indicator lights will be dimmed which makes them
unavailable at that moment.
TO MAKE THE KEYS LIGHT UP:
1 Gently sweep your finger over the bottom right hand side of your
display.
As a result, the keys will light up and are now available for further
actions. However, if no further actions are taken within the following 5
seconds, the keys indicator lights will dim again.
The keys indicator lights auto-dim function can be disabled in
page 29 for detailed instructions on how to do this.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 23
Stand-by switching
Switching on the display while it is in stand-by mode or vice versa can
both be done by using the keys or by using the control wheel.
TO SWITCH YOUR DISPLAY ON/STAND-BY USING THE KEYS:
1 Light up the keys indicator lights as previously described.
2 While the keys are light up, touch the Stand-by/Cancel
key for
approximately 2 seconds.
TO SWITCH YOUR DISPLAY ON/STAND-BY USING THE CONTROL WHEEL:
1 Press and hold the control wheel for approximately 2 seconds.
As a result, the display will switch on or will switch to stand-by mode.
When the display is switched on, the power status indicator light is
dimmed. When the display is in stand-by mode, the power status
indicator light is orange.
The power status indicator light can be enabled in the OSD
menu so that it will turn blue when the display is switched
for detailed instructions on how to do this.
In case of a power outage recovery, your display will always
start-up in the power mode it was in before the power
interruption (i.e. stand-by or on). This protects your display
against inadvertent image retention problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Coronis Fusion 10MP
Bringing up the OSD menu
The OSD menu allows you to configure different settings to make your
CORONIS FUSION 10MP display fit your needs within your working
environment. Also, you can retrieve general information about your
display and its current configuration settings through the OSD menu.
TO BRING UP THE OSD MENU USING THE KEYS:
1 If not already done so, switch on the display as previously
described.
2 Light up the keys indicator lights as previously described.
3 While the keys light up, touch the Menu/Enter
key.
TO BRING UP THE OSD MENU USING CONTROL WHEEL:
1 If not already done so, switch on the display as previously
described.
2 Shortly press the control wheel.
As a result, the OSD main menu comes up in the bottom right corner of
the screen. If no further actions are taken within the following 90
seconds however, the OSD menu will disappear again.
The OSD menu automatic close function can be disabled in the
OSD menu. Please refer to “OSD menu automatic close
this.
The OSD menu position can be modified in the OSD menu.
instructions on how to do this.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 25
Navigating through the OSD menus
ABOUT OSD MENU NAVIGATION
Navigating through the OSD menu can be done by using the keys or by
using the control wheel.
TO NAVIGATE THE OSD MENU USING THE KEYS:
• Use the Right/Down and Left/Up keys to move through the
(sub)menus, change values or make selections.
• To go into a submenu or confirm adjustments and selections, use
the Menu/Enter
key.
• Use the Stand-by/Cancel key to cancel adjustments or exit a
(sub)menu.
• Exit the OSD menu by touching the Stand-by/Cancel key for
approximately 2 seconds.
TO NAVIGATE THE OSD MENU USING THE CONTROL WHEEL:
• Rotate the control wheel to move through the menus, change
values or make selections.
• To go into a submenu or confirm adjustments and selections,
shortly click the control wheel.
• Click the control wheel for approximately 2 seconds to cancel
adjustments or exit a (sub)menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Coronis Fusion 10MP
Advanced operation
OSD menu position
ABOUT THE OSD MENU POSITION
By default, the OSD menu comes up in the bottom right corner of the
screen. This position can be modified however. There’s choice from a
number of predefined positions.
TO CHANGE THE POSITION OF THE OSD MENU:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Menu menu.
3 Enter the Position submenu.
4 Select one of the available OSD menu positions and confirm.
OSD menu language
ABOUT THE OSD MENU LANGUAGE
By default, the OSD menu comes up in English. However, there’s a wide
range of other languages available for the OSD menu of your CORONIS
FUSION 10MP display.
TO CHANGE THE LANGUAGE OF THE OSD MENU:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Menu menu.
3 Enter the Language submenu.
4 Select one of the available languages and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 27
OSD menu automatic close function
ABOUT THE OSD MENU AUTOMATIC CLOSE FUNCTION
By default, the OSD menu will disappear automatically after
approximately 90 seconds of inactivity. However, this function can be
disabled so that the OSD menu remains on the screen until manually
closed.
TO ENABLE/DISABLE THE OSD MENU AUTOMATIC CLOSE FUNCTION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Menu menu.
3 Enter the Automatic Close submenu.
4 Select Enabled/Disabled as desired and confirm.
Power status indicator light
ABOUT THE POWER STATUS INDICATOR LIGHT
By default, when the display is switched on, the power status indicator
light is dimmed. This behavior can be changed so that the power status
indicator light will be blue when the display is switched on.
When the display is in stand-by mode, the power status
indicator light will always turn orange, even when the power
status indicator light is disabled.
TO ENABLE/DISABLE THE POWER STATUS INDICATOR LIGHT:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Indicator Lights
menu.
3 Enter the Power Status submenu.
4 Select Enabled/Disabled as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Coronis Fusion 10MP
Keys indicator lights
ABOUT THE KEYS INDICATOR LIGHTS
By default, after lighting up, the keys indicator lights will dim again if no
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the keys indicator lights are always on
or always off.
TO CONFIGURE THE KEYS INDICATOR LIGHTS:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Indicator Lights
menu.
3 Enter the Keys submenu.
4 Select Automatic/Always On/Always Off as desired and confirm.
Power lock function
ABOUT THE POWER LOCK FUNCTION
By enabling the power lock function, the CORONIS FUSION 10MP display is
forced to remain switched on. This means that it can’t be switched to
stand-by mode until the power lock function is disabled again.
TO ENABLE/DISABLE THE POWER LOCK FUNCTION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Controls menu.
3 Enter the Power Lock submenu.
4 Select Enabled/Disabled as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 29
Keys sound
ABOUT THE KEYS SOUND
By default, the keys will make a “beep” sound on every touch. However,
this sound can be disabled so that no sound will be heard when using
the keys.
TO ENABLE/DISABLE THE KEYS SOUND:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > User Interface > Controls menu.
3 Enter the Sound submenu.
4 Select Enabled/Disabled as desired and confirm.
DPMS mode
ABOUT DPMS MODE
Enabling the Display Power Management System (DPMS) mode on your
display will optimize its diagnostic lifetime by automatically switching
off the backlight when the display is not used for a specified period of
time. By default, DPMS mode is enabled on your display, but it also
needs to be activated on your workstation. To do this, go to the “Power
options properties” window of your workstation.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
TO ENABLE/DISABLE DPMS MODE ON YOUR DISPLAY:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Power Management menu.
3 Enter the DPMS Mode submenu.
4 Select Enabled/Disabled as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Coronis Fusion 10MP
Luminance target
ABOUT THE LUMINANCE TARGET
The luminance target of your CORONIS FUSION 10MP display is adjustable
over a predefined range. When you change the luminance target, the
display will adjust its backlight to reach the target.
TO SET THE LUMINANCE TARGET:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Luminance Target submenu.
4 Set a luminance target value as desired and confirm.
Viewing modes
ABOUT VIEWING MODES
The CORONIS FUSION 10MP display can be used in two viewing modes:
Diagnostic
Text
This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.
TO SELECT A VIEWING MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Viewing Mode submenu.
4 Select Diagnostic/Text as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 31
Display functions
ABOUT DISPLAY FUNCTIONS
Native, uncorrected panels will display all grayscale/color levels at an
equal luminance. Studies have shown however, that in medical images
certain grayscale/color parts contain more diagnostic information then
others. To respond to these conclusions, display functions have been
defined. These functions emphasize on these parts containing crucial
diagnostic information by correcting the native panel behavior.
Native
If you select Native, the native panel
behavior will not be corrected.
Dynamic Gamma 1.8
Dynamic Gamma 2.2
These are gamma functions that are shifted
to take into account the non-zero
luminance of an LCD panel when driven
with a “black” signal.
They are especially useful in CT applications
to improve the perception of low
Haunsfield values.
DICOM
DICOM (Digital Imaging and
Communications in Medicine) is an
international standard that was developed
to improve the quality and communication
of digital images in radiology.
In short, the DICOM display function results
in more visible grayscales in the images.
Barco recommends selecting the DICOM
display function for most medical viewing
applications.
User
This display function will be automatically
selected when display functions are
defined by MediCal QAWeb.
Gamma 1.8
Gamma 2.2
Select one of these display functions in
case the display is to replace a CRT display
with a gamma of 1.8 or 2.2 respectively.
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Coronis Fusion 10MP
TO SELECT A DISPLAY FUNCTION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration menu.
3 Enter the Display Function submenu.
4 Select one of the available display functions and confirm.
Ambient Light Compensation (ALC)
ABOUT ALC
Ambient Light Compensation (ALC) can only be enabled on
your display when the DICOM display function is selected.
correctly set the display function.
When ALC is enabled, the DICOM display function will be recalculated
taking a preset ambient light correction value into account. This value is
determined by the selected reading room. Therefore, it is also important
to select a realistic reading room when enabling ALC. This can be done
TO ENABLE/DISABLE ALC:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration > Ambient Light
menu.
3 Enter the Ambient Light Compensation submenu.
4 Select Enabled/Disabled as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 33
Reading rooms
ABOUT READING ROOMS
Reading rooms can only be selected when the DICOM display
function is selected. Therefore, please refer to “Display
The American Association of Physicists in Medicine (AAPM) composed a
list of pre-defined reading rooms. Each of these reading rooms are
defined by following parameters:
• the maximum light allowed in this type of room
• the preset ambient light correction value for this reading room
These parameters are stored in your display and determine the preset
ambient light correction value to take into account to recalculate the
DICOM display function when Ambient Light Compensation (ALC) is
page 33 to enable ALC.
The available reading rooms for your CORONIS FUSION 10MP display are:
CR/DR/MAMMO
Corresponds to light conditions in
diagnostic reading rooms for computed
radiology, digital radiology or
mammography. This setting has the lowest
maximum ambient light.
CT/MR/NM
Staff Office
Corresponds to light conditions in
diagnostic reading rooms for computed
tomography, magnetic resonance or
nuclear medicine scans.
Corresponds to light conditions in office
rooms.
Clinical Viewing
Room
Corresponds to light conditions in
diagnostic reading rooms for clinical
viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Coronis Fusion 10MP
Emergency Room
Operating Room
Corresponds to light conditions in
emergency rooms.
Corresponds to light conditions in operating
rooms. This setting has the highest
maximum ambient light.
TO SELECT A READING ROOM:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Calibration > Ambient Light
menu.
3 Enter the Reading Room submenu.
4 Select one of the available reading rooms and confirm.
Image orientation
ABOUT IMAGE ORIENTATION
Your display automatically detects its physical orientation (portrait or
landscape) and, by default, automatically adjusts the image orientation
to this. This means that when your display is physically rotated, the
image will rotate along.
The OSD menu however, allows to overrule this behavior and force the
image orientation to portrait or landscape regardless of the physical
orientation of the display. This may be especially useful when operating
your display with the screen facing upwards.
TO SET THE IMAGE ORIENTATION:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources menu.
3 Enter the Orientation submenu.
4 Select Landscape/Portrait/Automatic as desired and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 35
Image scaling
ABOUT IMAGE SCALING
Enabling image scaling will multiply each individual pixel to one or more
adjacent pixels so that the size of the displayed image will be a multiple
of the original image source video input signal.
Image scaling is only possible when the resolution of your
display’s video input signal is less than or equal to half the
maximum resolution of the display.
TO ENABLE/DISABLE IMAGE SCALING:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources menu.
3 Enter the Scaling submenu.
4 Select Enabled/Disabled as desired and confirm.
Image source selection modes
ABOUT IMAGE SOURCE SELECTION MODES
Your CORONIS FUSION 10MP display automatically detects the number of
video input signals connected, attaches them to the correct display side
and applies the correct video settings to it (resolution, video encoding
mode, refresh rate,...). However, it may be needed to manually select
the video input signal(s) to be displayed on a certain display side or to
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Coronis Fusion 10MP
adjust certain video settings yourself. The start to this is selecting one of
the following image source selection modes available for your display:
Automatic
In this mode, your display automatically
detects the connected video input signals,
attaches them to the correct display side
and applies the correct video settings to it
(resolution, video encoding mode, refresh
rate,...).
No video settings are available when this
mode is selected.
One Image Source
Two Image Sources
This mode is intended for displaying and
manually configuring only one connected
video input signal.
When selecting this mode, the video
settings become available for the selected
video input signal.
This mode is intended for displaying and
manually configuring two connected video
input signals (one on each display side).
When selecting this mode, the video
settings become available for the selected
video input signal on each side of the
display.
TO SELECT AN IMAGE SOURCE SELECTION MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources menu.
3 Enter the Image Source Selection submenu.
4 Select one of the available image source selection modes and
confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 37
Video input signals
ABOUT VIDEO INPUT SIGNALS
Your CORONIS FUSION 10MP display automatically detects the
connected video input signals. Manually selecting image
source video input signals is possible, but then your display’s
image source selection mode should be set to allow this.
to do this.
The available input signals for your display are:
DisplayPort 1
This input corresponds to the DisplayPort 1
and connectors” section.
DVI 1
This input corresponds to the DVI 1
and connectors” section.
DisplayPort 2
DVI 2
This input corresponds to the DisplayPort 2
and connectors” section.
This input corresponds to the DVI 2
and connectors” section.
TO MANUALLY SELECT A VIDEO INPUT SIGNAL:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
3 Enter the Input Signal submenu.
4 Select one of the available input signals and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Coronis Fusion 10MP
Video encoding modes
ABOUT VIDEO ENCODING MODES
Your CORONIS FUSION 10MP display automatically detects the
connected video input signals and applies the correct video
encoding settings. Manually selecting a video encoding mode
is possible, but then your display’s image source selection
mode should be set to allow this. Please refer to “Image
Video encoding modes specify how the color and luminance information
is encoded in the video signal. In consumer displays, this is usually done
by a limited 8-bit encoding mechanism. Your CORONIS FUSION 10MP
display however, features 10-bit encoding enabling it to better match
the DICOM defined grayscale range. Such an extensive range is
necessary to comply with the guidelines set forward by the latest
medical guidelines.
The available video encoding modes for your display are listed below.
Please note that the display controller connected to your
display might not always support all these video encoding
modes.
Standard
HDR1
This mode uses the standard 8 bit encoding
mechanism.
This mode features 10-bit video encoding
following the High Dynamic Range (HDR)
standard, usually used on color displays.
HDR2
HDR2 is a Barco specific mode featuring
10-bit video encoding following the High
Dynamic Range (HDR) standard but
allowing full refresh rate (which is not
always possible with HDR1). This mode is
usually used on color displays.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 39
Dual 10
Dual 10 is a Barco specific 10-bit video
encoding mode which is usually used on
grayscale displays and which allows full
refresh rate.
Automatic
When selecting this option, your CORONIS
FUSION 10MP display will automatically
assign the correct video encoding settings
to the connected video input signals.
TO MANUALLY SELECT A VIDEO ENCODING MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
3 Enter the Video Encoding submenu.
4 Select one of the available video encoding modes and confirm.
Grayscale conversion modes
ABOUT GRAYSCALE CONVERSION MODES
Your CORONIS FUSION 10MP display automatically detects the
connected video input signals and applies the correct grayscale
conversion settings. Manually selecting a grayscale conversion
mode is possible, but then your display’s image source
selection mode should be set to allow this. Please refer to
Grayscale conversion modes specify how color generated on the display
controller is converted to grayscale in your display.
The available grayscale conversion modes are:
Use Red Channel
This mode is intended for grayscale
displays where gray is sent over the red
channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Coronis Fusion 10MP
Use Green Channel
Use Blue Channel
Use All Channels
This mode is intended for grayscale
displays where gray is sent over the green
channel.
This mode is intended for grayscale
displays where gray is sent over the blue
channel.
This mode is intended for grayscale
displays where gray is sent over the red,
green and blue channel. This done by
means of a standard conversion
mechanism where 30% red, 59% green
and 11% blue are used to generate gray.
TO MANUALLY SELECT A GRAYSCALE CONVERSION MODE:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
3 Enter the Grayscale Conversion submenu.
4 Select one of the available color conversion modes and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 41
Video timings
ABOUT VIDEO TIMINGS
Your CORONIS FUSION 10MP display automatically detects the
connected video input signals and applies the correct timings.
Manually configuring the video timings is possible, but then
your display’s image source selection mode should be set to
allow this. Please refer to “Image source selection modes”
on page 36 to do this.
Following video timings are available for your CORONIS FUSION 10MP
display:
Resolution
Allows to manually modify the resolution
of the image source video input signal.
Refresh Rate
Allows to manually select the refresh rate
of the image source video input signal
depending on the maximum refresh rate of
the display controller connected to your
display.
Orientation
Allows to change the orientation of the
image source video input signal to
landscape, portrait or to let the display
automatically assign the correct
orientation.
TO MANUALLY SET VIDEO TIMINGS:
1 Bring up the OSD main menu.
2 Navigate to the Configuration > Image Sources > (Left/Right)
Image Source menu.
3 Enter the Timings submenu.
4 Select Resolution, Refresh Rate or Orientation.
5 Select one of the available settings and confirm.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Coronis Fusion 10MP
Display info
ABOUT DISPLAY INFO
Your display serial number, color type, native resolution, firmware
versions, etc. are available in a dedicated submenu of the OSD menu.
TO RETRIEVE INFO ABOUT YOUR DISPLAY:
1 Bring up the OSD main menu.
2 Navigate to the About this Display menu.
3 Enter the Display or Firmware submenu as desired.
Display status
ABOUT DISPLAY STATUS
The Status submenu of the OSD menu provides info on the current status
of your display (runtimes, temperatures, etc.), the status of the
connected image sources (video encoding mode, timings, etc.) and the
current calibration status of your display (display function, luminance,
ALC, etc.).
TO RETRIEVE THE STATUS OF YOUR DISPLAY:
1 Bring up the OSD main menu.
2 Navigate to the Status menu.
3 Enter the Display, Image Source or Calibration submenu as
desired.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 43
(This page intentionally left blank.)
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Coronis Fusion 10MP
Cleaning your display
Front glass
Before cleaning the front glass, unplug the power cable from
the mains to prevent the keys from being activated
inadvertently by sweeping over them.
Clean the front glass using a sponge, cleaning cloth or soft tissue, lightly
moistened with one of the following tested products:
• Flux
• Windex Glass Plus
• Bohle glass cleaner
• Mr. Proper
• Pril
• Ajax glass cleaner
• Sidolin glass cleaner
In case none of the above cleaning products is available, use plain water.
Take care not to damage or scratch the front glass. Be careful
with rings or other jewelry and do not apply excessive pressure
on the front glass.
Do not apply or spray liquid directly to the front glass as excess
liquid may cause damage to internal electronics. Instead, apply
the liquid to the cleaning cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 45
Do not use following products:
• Alcohol/solvents at higher concentration > 5%
• Strong alkalis lye, strong solvents
• Acid
• Detergents with fluoride
• Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
Cabinet
1 Clean the cabinet using a soft cotton cloth, lightly moistened with
a recognized cleaning product for medical equipment.
The cabinet has been tested for resistance to the following
products:
• Cidex, Betadine
• Alcohol (Isopropyl and Ethyl)
• Ammonia-based cleaners (Windex)
• Aquasonic Gel
In case none of the above cleaning products is available, use plain
water.
Do not apply or spray liquid directly to the cabinet as
excess liquid may cause damage to internal electronics.
Instead, apply the liquid to the cleaning cloth.
2 Repeat with water only.
3 Wipe dry with a dry cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Coronis Fusion 10MP
Important information
Safety information
GENERAL RECOMMENDATIONS
Read the safety and operating instructions before operating the display.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the display and in the operating instructions
manual.
Follow all instructions for operation and use.
ELECTRICAL SHOCK
TYPE OF PROTECTION (ELECTRICAL):
Display with external power supply: Class I equipment
DEGREE OF SAFETY (FLAMMABLE ANESTHETIC MIXTURE):
Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
NON-PATIENT CARE EQUIPMENT
Equipment primarily for use in a health care facility that is intended for
use where contact with a patient is unlikely.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 47
POWER CONNECTION - DISPLAY WITH EXTERNAL 24 VDC POWER
SUPPLY
• Power requirements: The display must be powered using the
delivered medical approved 24 VDC SELV power supply.
• The medical approved DC power supply must be powered by the
AC mains voltage (protective earth terminal).
POWER CORDS:
• Utilize a UL-listed detachable power cord, 3-wire, type SJ or
equivalent, 18 AWG min., rated 300 V min., provided with a
hospital-grade type plug 5-15P configuration for 120V application,
or 6-15P for 240V application.
• Do not overload wall outlets and extension cords as this may result
in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should be
routed so that they are not likely to be walked upon or pinched by
items placed upon or against them, paying particular attention to
cords at plugs and receptacles.
WATER AND MOISTURE
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub, washbasin,
swimming pool, kitchen sink, laundry tub or in a wet basement.
VENTILATION
Do not cover or block the ventilation openings in the cover of the set.
When installing the display in a cupboard or another closed location,
heed the necessary space between the set and the sides of the
cupboard.
INSTALLATION
Place the display on a flat, solid and stable surface that can support the
weight of at least 3 displays. If you use an unstable cart or stand, the
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Coronis Fusion 10MP
display may fall, causing serious injury to a child or adult, and serious
damage to the equipment.
THIS APPARATUS CONFORMS TO:
CE0120 (MDD 93/42/EEC class IIb product), CE - 2004/108/EC, CE - 93/
42/EEC; A1:2007/47/EC class II b, UL 60601-1 1ST EDITION, CAN/CSA-
C22.2 NO. 601.1-M90, IEC 60601-1 2ND ED:1988 + A1:1991 + A2:1995,
IEC 60950-1:2005 2ND EDITION, DEMKO - EN 60601-1, CCC - GB9254-
2008 + GB4943-2001 + GB17625.1-2003, VCCI, FCC class B, BSMI, FDA
510K, RoHS, KC
NATIONAL SCANDINAVIAN DEVIATIONS FOR CL. 1.7.2:
Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 49
Environmental information
DISPOSAL INFORMATION (WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT)
This symbol on the product indicates that, under European
Directive 2002/96/EC governing waste from electrical and
electronic equipment, this product must not be disposed of
with other municipal waste. Please dispose of your waste
equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. To prevent
possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of
material resources.
For more information about recycling of this product, please contact your
local city office, your municipal waste disposal service or the shop where
you purchased the product.
MERCURY NOTICE
This Barco product consists of materials that may contain mercury, which
must be recycled or disposed of in accordance with local, state, or
country laws:
• Within this system, the backlight lamps in the monitor display
contain mercury
TURKEY ROHS COMPLIANCE
Republic of Turkey: In conformity with the EEE Regulation
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Coronis Fusion 10MP
中国大陆 ROHS (CHINESE MAINLAND ROHS)
根据中国大陆 《电子信息产品污染控制管理办法》（也称为中国大
陆 RoHS），以下部分列出了 Barco 产品中可能包含的有毒和 / 或有
害物质的名称和含量。中国大陆 RoHS 指令包含在中国信息产业部
MCV 标准：“ 电子信息产品中有毒物质的限量要求 ” 中。
According to the "China Administration on Control of Pollution Caused by
Electronic Information Products" (Also called RoHS of Chinese Mainland),
the table below lists the names and contents of toxic and/or hazardous
substances that Barco's product may contain. The RoHS of Chinese
Mainland is included in the MCV standard of the Ministry of Information
Industry of China, in the section "Limit Requirements of toxic substances
in Electronic Information Products".
零件项目 ( 名称 )
有毒有害物质或元素
Component Name
Hazardous Substances or Elements
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
(Pb)
(Hg)
(Cd)
(Cr6+)
(PBB)
(PBDE)
印制电路配件
X
O
O
O
O
O
Printed Circuit
Assemblies
液晶面板
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
LCD panel
外接电 ( 线 ) 缆
External cables
內部线路
O
O
O
O
O
Internal wiring
金属外壳
Metal enclosure
塑胶外壳
Plastic enclosure
散热片 ( 器 )
Heatsinks
风扇
Fan
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 51
电源供应器
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Power supply unit
文件说明书
Paper manuals
光盘说明书
CD manual
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限
量要求以下 .
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规
定的限量要求 .
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363
2006.
在中国大陆销售的相应电子信息产品 （EIP）都必须遵照中国大陆
《电子信息产品污染控制标识要求》标准贴上环保使用期限
（EFUP）标签。Barco 产品所采用的 EFUP 标签 （请参阅实例，徽
标内部的编号使用于制定产品）基于中国大陆的 《电子信息产品
环保使用期限通则》标准。
All Electronic Information Products (EIP) that are sold within Chinese
Mainland must comply with the "Electronic Information Products
Pollution Control Labeling Standard" of Chinese Mainland, marked with
the Environmental Friendly Use Period (EFUP) logo. The number inside
the EFUP logo that Barco uses (please refer to the photo) is based on the
"Standard of Electronic Information Products Environmental Friendly Use
Period" of Chinese Mainland.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Coronis Fusion 10MP
Regulatory compliance information
INDICATIONS FOR USE
The CORONIS FUSION 10MP display (MDCG-10130) is intended to be used in
displaying and viewing digital images, including digital mammography,
for review and analysis by trained medical practitioners.
Caution (USA): Federal law restricts this device to sale by or on the order
of a physician or a practitioner trained on its use.
FCC CLASS B
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CANADIAN NOTICE
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 53
Explanation of symbols
On the display or power supply, you may find the following symbols
(nonrestrictive list):
Indicates compliance to the essential
requirements of the Directive 93/42/EEC
0120
Indicates compliance with Part 15 of the
FCC rules (Class A or Class B)
Indicates the display is approved according
to the UL regulations
or
Indicates the display is approved according
to the c-UL regulations
or
Indicates the display is approved according
to the DEMKO regulations
Indicates the display is approved according
S&E
to the CCC regulations
Indicates the display is approved according
to the VCCI regulations
Indicates the USB connectors on the display
Indicates the manufacturing date
Indicates the temperature limitations for
the display to operate within specs
Indicates the display serial no.
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Coronis Fusion 10MP
Consult the operating instructions
Indicates this apparatus must not be
thrown in the trash but must be recycled,
according to the European WEEE (Waste
Electrical and Electronic Equipment)
directive
Legal disclaimer
Although every attempt has been made to achieve technical accuracy in
this document, we assume no responsibility for errors that may be
found. Our goal is to provide you with the most accurate and usable
documentation possible; if you discover errors, please let us know.
Barco software products are the property of Barco. They are distributed
under copyright by Barco N.V. or Barco, Inc., for use only under the
specific terms of a software license agreement between Barco N.V. or
Barco Inc. and the licensee. No other use, duplication, or disclosure of a
Barco software product, in any form, is authorized.
The specifications of Barco products are subject to change without
notice.
All trademarks and registered trademarks are property of their
respective owners.
This document is copyrighted. All rights are reserved. Neither this
document, nor any part of it, may be reproduced or copied in any form
or by any means - graphical, electronic, or mechanical including
photocopying, taping or information storage and retrieval systems -
without written permission of Barco.
© 2011 Barco N.V. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 55
Technical specifications
Product acronym
Screen technology
MDCG-10130
TFT AM LCD Dual Domain IPS
761 mm (29.6”)
Active screen size
(diagonal)
Active screen size (H x V)
Aspect ratio (H:V)
Resolution
645 x 403 mm (25.4 x 15.9“)
16:10
10MP (4096 x 2560)
Pixel pitch
0.1575 mm
Color imaging
Gray imaging
No
Yes
Number of grayscales (LUT
in/LUT out)
1024 grey levels (10/12)
Viewing angle (H, V)
170°
Yes
Uniform Luminance
Technology (ULT)
Per Pixel Uniformity (PPU)
No
Ambient Light
Yes
Compensation (ALC)
Backlight Output
Yes
Stabilization (BLOS)
I-Guard
Yes
Maximum luminance
1250 cd/m²
500 cd/m²
DICOM calibrated
luminance (ULT off)
Contrast ratio (ULT off)
Response time (Tr + Tf)
800:1
35 ms
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Coronis Fusion 10MP
Scanning frequency (H; V)
Housing color
30-150 kHz; 15-80 Hz
Black/Silver
Video input signals
Video inout terminals
USB ports
DVI-D Dual Link (2x) / DisplayPort (2x)
NA
1 upstream (endpoint), 3 downstream
USB standard
2.0
Power requirements
(nominal)
100-240V
Power consumption
(nominal)
102W
Power save mode
Power management
Dot clock
Yes
DVI-DMPM / DP-DMPM
280 MHz
OSD languages
English, German, French, Dutch, Spanish, Italian,
Portuguese, Polish, Russian, Swedish, Chinese
(simplified), Japanese, Korean, Arabic
Dimensions with stand (W
x H x D)
Portrait: NA
Landscape: 731 x 580~670 x 270 mm
Dimensions w/o stand (W
x H x D)
Portrait: NA
Landscape: 731 x 485 x 125 mm
Dimensions packaged (W x
H x D)
869 x 764 x 400 mm
Net weight with stand
Net weight w/o stand
24.2 kg
17.7 kg
33.1 kg
Net weight packaged with
stand
Net weight packaged w/o
stand
NA
Height adjustment range
96 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 57
Tilt
-5° / +25°
Swivel
-30° / +30°
Pivot
NA
Mounting standard
Screen protection
Recommended modalities
Certifications
VESA (100 mm)
Protective, non-reflective glass cover
CT, MR, US, DR, CR, NM, Film
CE0120 (MDD 93/42/EEC class IIb product), CE -
2004/108/EC, CE - 93/42/EEC; A1:2007/47/EC class
II b, UL 60601-1 1ST EDITION, CAN/CSA-C22.2 NO.
601.1-M90:2005, IEC 60601-1 2ND ED:1988 + A1:1991
+ A2:1995, IEC 60950-1:2005 2ND EDITION, DEMKO -
EN 60601-1:1990 + A1:1993 + A2:1995, CCC - GB9254-
2008 + GB4943-2001 + GB17625.1-2003, VCCI, FCC
class B, BSMI, FDA 510K, RoHS, KC
Supplied accessories
User Guide
Quick-Installation Sheet
Video cables (2 x DVI Dual Link, 2 x DisplayPort)
Main cables (UK, European (CEBEC/KEMA), USA (UL/
CSA; adaptor plug NEMA 5-15P), Chinese (CCC))
USB 2.0 cable
External power supply
Optional accessories
QA software
NA
MediCal QAWeb
Unit per pallet
NA
Pallet dimensions
Warranty
NA
5 years
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Operating altitude
0°C to 40°C (15°C to 35°C within specs)
-20°C to 60°C
8% - 70% (non-condensing)
5% - 95% (non-condensing)
2000 m
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Coronis Fusion 10MP
Warranty statement
BARCO MID GENERAL WARRANTY TERMS AND CONDITIONS
Applicable from Jan 1st 2008
ARTICLE 1: PRODUCT WARRANTY
Barco nv, Medical Imaging Division warrants that the equipment will be free of defects in workmanship or material for
the warranty period or the specific period of a warranty extension program.
Hardware: Barco warrants that upon delivery hereunder the Products shall (i) conform to its specifications in effect at the
date of delivery and (ii) be free from defects in material and workmanship (the "Warranties").
Software: Barco warrants that software written by Barco shall perform substantially in accordance with the specifications
in effect at the date of delivery. Software is inherently susceptible to bugs and errors. Barco makes no warranties with
respect to the software which is provided to Customer on an "as-is" basis and does not warrant uninterrupted or error-
free operation of the Products.
Unless otherwise indicated in Barco’s Product manual or in the agreement between Barco and Customer, the Warranty
Period shall be
(a) Hardware: 12 months commencing on the Barco date of invoice.
(b) Software: 3 months commencing on the Barco date of invoice.
Notwithstanding the provisions of clause 2, repair and replacement of defects in material and/or workmanship under this
warranty shall be accomplished in our works according to the terms and conditions as set forth hereafter:
1.1 Any claim under the Warranties must be notified to Barco in writing within 8 days from the date the defect or
failure has been discovered or noticed the first time. The Customer, upon the occurrence of any equipment failure, shall
contact Barco nv, MID customer support centre (or an authorised service centre) by telephone, fax or e-mail and shall
provide the applicable customer support person with a complete description of the problem being encountered, including
the model and serial number of the equipment in which the problem has arisen.
1.2 The customer support person shall diagnose the problem experienced by the Customer and shall advise the
Customer on how to proceed. Customer support may ask to return the faulty equipment or faulty subassemblies to the
Barco nv, or a MID customer support centre (or an authorised service centre) for repair activities. In no event shall
Customer return a defective Product or part thereof to Barco without Barco's prior written approval.
In the event the return to Barco of the defective Product is authorized by Barco, Barco shall issue to Customer an RMA
(Return Material Authorization).
The Customer shall apply for an RMA number to the closest Barco nv, MID Customer support centre (or an authorised
The one-way cost of packing, transport and insurance related to shipping the alleged defective Product or part to Barco
for repair or replacement shall be borne by Customer. The one-way cost of packing, transport and insurance related to
shipping of the repaired or replacement Product or part to Customer shall be borne by Barco.
1.3 The Customer shall return, freight prepaid, the defective equipment or subassemblies in its original packaging with
the assigned RMA number for repair to the Barco nv, MID Customer support centre (or an authorised service centre).
1.4 Replacement parts used shall be new or equivalent to new parts for the revision level of the equipment. A
replacement LCD panel will be new or similar run time. The warranty period for the replacement parts will expire at the
same moment as the original warranty period of the equipment. All parts replaced hereunder and returned to Barco nv,
MID (or an authorised service centre) shall become the property of Barco nv, MID (or the authorised service centre).
1.5 The repaired equipment shall be returned to the Customer, by regular freight, at Barco nv, MID’s charge.
1.6 Barco nv, MID will replace a product that fails within 90 days after shipment from Barco with a new one, ensuring
color matching in the event of a diagnostic multi head display configuration.
Barco aims to ship the new replacement product within 2 business days after receipt of the Customers notification in
writing.
ARTICLE 2: CONDITIONS PRECEDENT FOR WARRANTY AND ITEMS EXCLUDED FROM WARRANTY
A.
The Warranties shall apply only to the extent the Products or any parts thereof have
(i) been transported and stored at all times in the original packaging in the conditions as specified by Barco (such
as covered and secure location, minimum and maximum temperature, maximum humidity, …) or, in absence
thereof, at least in conditions consistent with generally accepted practice for this type of products;
(ii) been handled at all times in accordance with Barco's instructions or, in absence thereof, at least with the care
and caution consistent with generally accepted practice for this type of products;
(iii)been installed strictly in accordance with the instructions and directions given by Barco (if and to the extent the
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 59
Products have not been installed by Barco or its authorized subcontractors);
(iv)not been subject to any unauthorized access, alteration, modification or repair or attempts thereto;
(v) been at all times "normally used" for the intended purpose and operated in strict accordance with the operating
instructions set forth in the operating manual of the Product in question and shall not have been otherwise
misused, abused, damaged. For the purpose hereof, "normally used" shall mean a regular, ordinary and routine
usage of the Product in question as intended and/or recommended by Barco;
(vi)been maintained at all times in accordance with Barco's instructions or, in absence thereof, at least with
intervals and in a manner consistent with generally accepted practice for this type of products;
B.
The warranty described herein shall not include the following:
2.1 Any hardware or software item procured from a source other than Barco nv, MID or their official agent or distributor
and integrated by Customer or a third party into Barco nv, MID supplied equipment.
2.2 Any host configuration not explicitly supported by Barco nv, MID.
2.3 All software installed on the system, whether they are acquired from Barco nv, MID or third party. An exception is
made for software delivered by Barco nv, MID that would prove to be a cause for the mal functioning of the hardware
covered under this Agreement.
2.4 Normal wear and tear, use under circumstances exceeding specifications, such as use in dusty environment or
under excessive temperature conditions, abuse, unauthorised repair or alternation, lack of proper configuration or
maintenance, damaged or modified or removed serial number, cosmetic refurbishment.
1
2.5 Repair or replacement of consumables or specific parts that by definition are subject to wear and tear, including
but not limited to:
a. CRT’s, LCD panels
2
b. Backlights in diagnostic LCD displays, when the backlight run time is beyond the Guaranteed Backlight
3
4
Lifetime of that model, when used at the Factory Calibrated Luminance
Eg1.
•
•
•
•
A display is used at 8 hours/day; ie. +/-2.920hours/year
The display system is covered with a warranty period of 5 year
The Guaranteed Backlight Lifetime of that model is 17.000hours.
The Factory Calibrated Luminance cannot be achieved anymore after 4 year, thus corresponding to +/-
11.680hours
•
Result: the backlight replacement is performed under warranty
Eg2.
•
•
•
•
A display is used at 24 hours/day; ie. 8.760hours/year
The display system is covered with a warranty program of 5 year
The Guaranteed Backlight Lifetime of that model is 17.000hours.
The Factory Calibrated Luminance cannot be achieved anymore after 2.5years, thus corresponding to +/
-21.900hours
•
Result: the backlight replacement does not make part of the warranty coverage.
(1): ‘Consumable’ is a part that can be replaced by the user
(2): ‘Backlight run time’ is the total time that an image (including use of a screen saver) has been applied to the
screen; this value can be consulted via the OSD buttons (On Screen Display).
(3): ‘Guaranteed Backlight Lifetime’ is the number of backlight hours during which a predefined luminance
value, ie. the Factory Calibrated Luminance, will be provided by a specific diagnostic display model. This
figure is printed on the Warranty certificate of each display or can be requested at your local Barco office.
(4): ‘Factory Calibrated Luminance’: is the typical luminance value that a specific diagnostic display model is
calibrated at during the production process. This figure is printed on the Warranty certificate of each display
or can be requested at your local Barco office.
c. Lamps, optical components in projectors
d. Replacement because of:
i. image retention as a result of:
-
not correctly using screen saver and/or Display Power Management System (DPMS) as explained in the
user manual
-
prolonged operation of the display with a static image on the same screen area
ii. a number of missing pixels that is lower than the total allowable number as mentioned in the product
specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 Coronis Fusion 10MP
iii. difference in color temperature that is lower than the total allowable difference as mentioned in the
product specifications
iv. difference in color temperature as a result of not using all displays of a multi-head configuration at the
same rate.
v. LCD luminance uniformity that is in within the product specifications or luminance uniformity performance
that is inherent to LCD technology.
Barco nv, MID does not warrant a minimum life time nor a performance of any of the consumables.
2.6 Replacement of moveable parts such as power cords, remote controls, …
2.7 Any product disassembly and installation costs at the operation site, travel expenses and travel time to and from
the operation site for the personnel in charge of the repair works and transport charges.
2.8 Any failures resulting from an accident, negligence (such as but not limited to removing or deleting system files &
licensed software product files), misuse, circuit failure or any change, damage due to fire, water, thunder or lightning,
power failure or fluctuation, disruption of communication lines or due to force majeure, or any reason foreign to the
equipment.
2.9 Any specific services or procedures, asked for by Customer, related to verification of repaired equipment.
2.10 The evaluation cost in case of a returned product deemed functional is not covered under warranty and will be
charged to the Customer, at Barco’s sole discretion, based on a case-by-case evaluation.
ARTICLE 3: OBLIGATIONS OF THE CUSTOMER
Customer hereby assumes the following obligations as partial consideration for Barco nv, MID performance of its
requirements under the warranty condition; failure by Customer to meet its obligations under this paragraph shall excuse
Barco nv, MID’s performance hereunder:
3.1 Customer shall not expose Barco nv, MID personnel to any unsafe working conditions.
3.2 Repairs to equipment under warranty resulting from improper maintenance or repair performed by the Customer,
or its officers, agents, employees, or representatives, shall be borne by the Customer at its additional cost and expense.
3.3 The Customer is responsible for installing the Barco nv, MID equipment in an environment for which it was
intended. If there is an indication that the equipment was used – even temporary – outside its specifications, Barco nv,
MID is entitled not to perform warranty repairs and terminate the warranty agreement. Any actions that have been taken
by Barco nv, MID in this respect, may be invoiced to the Customer at normal pricing.
ARTICLE 4: REMEDIES UNDER WARRANTY
(a) Hardware: If during the Warranty Period a Product or any part thereof, fails to meet any of the Warranties then,
upon Customer's request, Barco shall, at its sole option and cost, promptly and within 20 working days, either: (i) repair
or correct the Product or part in question; or (ii) replace the Product or supply part(s) or component(s) according to the
terms and conditions contained in article 1. A replacement part shall be at least functionally equivalent to the original
part. The replaced Product, parts and/or components shall become the property of Barco and shall, at Barco's request, be
returned by Customer to Barco at Barco's cost.
(b) Software: Barco's sole obligation shall be to rectify substantial malfunctions of the software (to the extent
technically reasonably possible) by amending the software or supplying an alternative version of the software.
(c) The repair or replacement under the Warranties covers the cost of material and labor.
ARTICLE 5: DISCLAIMER OF WARRANTIES
BARCO NV, MID DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
ARTICLE 6: LIMITATION OF LIABILITY
The remedies specified in these Terms and Conditions shall constitute Customer's sole and exclusive remedy and Barco's
sole and exclusive liability for Barco’s breach of the Warranties hereunder.
BARCO NV, MID SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR DIRECT,
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, SUCH AS BUT NOT LIMITED TO, DAMAGE TO OR LOSS OF
TANGIBLE OR INTANGIBLE PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUES, COST OF CAPITAL, COST OF PURCHASE
OF REPLACEMENT GOODS, OR CLAIMS OF USER FOR SERVICE INTERRUPTIONS. THE LIABILITY OF BARCO NV, MID FOR
MANUFACTURING, SALE, DELIVERY, RESALE, INSTALLATION, OPERATION OR SUITABILITY FOR USE OF ANY PRODUCTS OR
SERVICES COVERED BY OR FURNISHED UNDER THIS WARRANTY CONDITION, WHETHER ARISING OUT OF CONTRACT,
NEGLIGENCE, STRICT TORT, WARRANTY OR OTHERWISE, SHALL NOT EXCEED THE PRICE OF THE ITEM OR ITEMS OF GOODS OR
SERVICES UPON WHICH SUCH LIABILITY IS BASED.
ARTICLE 7: FORCE MAJEURE
Either party shall be released from performance of its obligations under this agreement to the extent, and for so long as,
the performance of this agreement is impeded by reason of force majeure. For the purposes of this clause the
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 61
expression "force majeure" means, but shall not be limited to, industrial dispute, fire, mobilisation, requisition, embargo,
currency transfer prohibitions, insurrection, lack of means of transport, restrictions of the use of energy, and generally any
circumstances which are beyond the control of the parties and hinder performance by one party of his obligations.
ARTICLE 8: GENERAL
8.1 Customer acknowledges its understanding that all software and electronic devices, including Barco nv, MID products
are subject to possible error, mechanical or electrical failure, and should not be relied upon in inappropriate applications
or without proper backup and/or other safety precautions whenever personal injury or property damage may result from
failure or error of the product.
8.2 Barco nv, MID shall not be responsible for machine failure and/or its failure to render service or maintenance due to
causes beyond its reasonable control.
Open source license information
This product contains software components released under an Open Source license. A copy of the source code is available
on request by contacting your MID customer support representative at [email protected].
The licenses are only provided in English because translations do not legally state the distribution terms for software that
uses these licenses - only the original English text does that. However, translations in your local language are available at
The software running in the internal processor uses the following licenses.
GNU GENERAL PUBLIC LICENSE, Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the Free Software Foundation's software
and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered
by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that
you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software,
or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty
for this free software. If the software is modified by someone else and passed on, we want its recipients to know that
what they have is not the original, so that any problems introduced by others will not reflect on the original authors'
reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of
a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0.
This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or
Download from Www.Somanuals.com. All Manuals Search And Download.
62 Coronis Fusion 10MP
work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute
a work based on the Program (independent of having been made by running the Program). Whether that is true depends
on what the Program does.
1.
You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2.
You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also
meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of
any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement,
your work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3.
You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more
than your cost of physically performing source distribution, a complete machine-readable copy of the
corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code
or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the
source code distributed need not include anything that is normally distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4.
You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will not
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 63
have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you
indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6.
Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7.
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it
and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8.
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9.
The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
GNU GENERAL PUBLIC LICENSE, Version 3, 29 June 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
64 Coronis Fusion 10MP
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The licenses for most software and other practical works are designed to take away your freedom to share and change
the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all
versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to any other work released this way by its authors.
You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free
programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights.
Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to
respect the freedom of others.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the
same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must
show them these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer
you this License giving you legal permission to copy, distribute and/or modify it.
For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For
both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will
not be attributed erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although
the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the
software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely
where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those
products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains
in future versions of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict
development and use of software on general-purpose computers, but in those that do, we wish to avoid the special
danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that
patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0.
Definitions.
"This License" refers to version 3 of the GNU General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this License. Each licensee is addressed as "you".
"Licensees" and "recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other
than the making of an exact copy. The resulting work is called a "modified version" of the earlier work or a work "based
on" the earlier work.
A "covered work" means either the unmodified Program or a work based on the Program.
To "propagate" a work means to do anything with it that, without permission, would make you directly or secondarily
liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy.
Propagation includes copying, distribution (with or without modification), making available to the public, and in some
countries other activities as well.
To "convey" a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction
with a user through a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices" to the extent that it includes a convenient and
prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no
warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this
License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1.
Source Code.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 65
The "source code" for a work means the preferred form of the work for making modifications to it. "Object code" means
any non-source form of a work.
A "Standard Interface" means an interface that either is an official standard defined by a recognized standards body, or, in
the case of interfaces specified for a particular programming language, one that is widely used among developers
working in that language.
The "System Libraries" of an executable work include anything, other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to
enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation
is available to the public in source code form. A "Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a
compiler used to produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all the source code needed to generate, install, and
(for an executable work) run the object code and to modify the work, including scripts to control those activities.
However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs
which are used unmodified in performing those activities but which are not part of the work. For example,
Corresponding Source includes interface definition files associated with source files for the work, and the source code for
shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate
data communication or control flow between those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the
Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
2.
Basic Permissions.
All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided
the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program.
The output from running a covered work is covered by this License only if the output, given its content, constitutes a
covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not convey, without conditions so long as your license
otherwise remains in force. You may convey covered works to others for the sole purpose of having them make
modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do not control copyright. Those thus making or running
the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit
them from making any copies of your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not
allowed; section 10 makes it unnecessary.
3.
Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling
obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or
restricting circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the
extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you
disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users,
your or third parties' legal rights to forbid circumvention of technological measures.
4.
Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that
this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the
absence of any warranty; and give all recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for
a fee.
5.
Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source
code under the terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
b) The work must carry prominent notices stating that it is released under this License and any conditions added
under section 7. This requirement modifies the requirement in section 4 to "keep intact all notices".
c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a
copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the
work, and all its parts, regardless of how they are packaged. This License gives no permission to license the
work in any other way, but it does not invalidate such permission if you have separately received it.
Download from Www.Somanuals.com. All Manuals Search And Download.
66 Coronis Fusion 10MP
d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program
has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of
the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage
or distribution medium, is called an "aggregate" if the compilation and its resulting copyright are not used to limit the
access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in
an aggregate does not cause this License to apply to the other parts of the aggregate.
6.
Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey
the machine-readable Corresponding Source under the terms of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),
accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software
interchange.
b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),
accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or
customer support for that product model, to give anyone who possesses the object code either (1) a copy of the
Corresponding Source for all the software in the product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no more than your reasonable cost of physically
performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at
no charge.
c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding
Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object
code with such an offer, in accord with subsection 6b.
d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through the same place at no further charge. You need
not require recipients to copy the Corresponding Source along with the object code. If the place to copy the
object code is a network server, the Corresponding Source may be on a different server (operated by you or a
third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object
code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding
Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object
code and Corresponding Source of the work are being offered to the general public at no charge under
subsection 6d.
A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System
Library, need not be included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any tangible personal property which is normally used
for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In
determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a
particular product received by a particular user, "normally used" refers to a typical or common use of that class of product,
regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is
expected to use, the product. A product is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.
"Installation Information" for a User Product means any methods, procedures, authorization keys, or other information
required to install and execute modified versions of a covered work in that User Product from a modified version of its
Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code
is in no case prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the
conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the
recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source
conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if
neither you nor any third party retains the ability to install modified object code on the User Product (for example, the
work has been installed in ROM).
The requirement to provide Installation Information does not include a requirement to continue to provide support
service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in
which it has been modified or installed. Access to a network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format
that is publicly documented (and with an implementation available to the public in source code form), and must require
no special password or key for unpacking, reading or copying.
7.
Additional Terms.
"Additional permissions" are terms that supplement the terms of this License by making exceptions from one or more of
its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 67
included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part
of the Program, that part may be used separately under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy,
or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you
modify the work.) You may place additional permissions on material, added by you to a covered work, for which you
have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by
the copyright holders of that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the
Appropriate Legal Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material
be marked in reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or
modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these
contractual assumptions directly impose on those licensors and authors.
All other non-permissive additional terms are considered "further restrictions" within the meaning of section 10. If the
Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term
that is a further restriction, you may remove that term. If a license document contains a further restriction but permits
relicensing or conveying under this License, you may add to a covered work material governed by the terms of that
license document, provided that the further restriction does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of
the additional terms that apply to those files, or a notice indicating where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as
exceptions; the above requirements apply either way.
8.
Termination.
You may not propagate or modify a covered work except as expressly provided under this License. Any attempt
otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any
patent licenses granted under the third paragraph of section 11).
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if
the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of
the violation by some reasonable means, this is the first time you have received notice of violation of this License (for
any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights
from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to
receive new licenses for the same material under section 10.
9.
Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a
covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not
require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered
work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run,
modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third
parties with this License.
An "entity transaction" is a transaction transferring control of an organization, or substantially all assets of one, or
subdividing an organization, or merging organizations. If propagation of a covered work results from an entity
transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work
the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable
efforts.
You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For
example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and
Download from Www.Somanuals.com. All Manuals Search And Download.
68 Coronis Fusion 10MP
you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is
infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this License of the Program or a work on which the
Program is based. The work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims owned or controlled by the contributor, whether already
acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or
selling its contributor version, but do not include claims that would be infringed only as aconsequence of further
modification of the contributor version. For purposes of this definition, "control" includes the right to grant patent
sublicenses in a manner consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential
patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its
contributor version.
In the following three paragraphs, a "patent license" is any express agreement or commitment, however denominated,
not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent
infringement). To "grant" such a patent license to a party means to make such an agreement or commitment not to
enforce a patent against the party.
If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not
available for anyone to copy, free of charge and under the terms of this License, through a publicly available network
server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or
(2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent license to downstream recipients. "Knowingly
relying" means you have actual knowledge that, but for the patent license, your conveying the covered work in a country,
or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country
that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring
conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing
them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is
automatically extended to all recipients of the covered work and works based on it.
A patent license is "discriminatory" if it does not include within the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may
not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing
software, under which you make payment to the third party based on the extent of your activity of conveying the work,
and under which the third party grants, to any of the parties who would receive the covered work from you, a
discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from
those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work,
unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement
that may otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from
those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to
refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a
work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the
resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special
requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to
the combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the
GNU General Public License "or any later version" applies to it, you have the option of following the terms and conditions
either of that numbered version or of any later version published by the Free Software Foundation. If the Program does
not specify a version number of the GNU General Public License, you may choose any version ever published by the Free
Software Foundation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 69
If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used,
that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the
Program.
Later license versions may give you additional or different permissions. However, no additional obligations are imposed
on any author or copyright holder as a result of your choosing to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their
terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in
connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return
for a fee.
END OF TERMS AND CONDITIONS
GNU LESSER GENERAL PUBLIC LICENSE, Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically
libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you
first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any
particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed
to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish);
that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new
free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients, so that they can relink them with the library after making
changes to the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library
is modified by someone else and passed on, the recipients should know that what they have is not the original version,
so that the original author's reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a
company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.
Download from Www.Somanuals.com. All Manuals Search And Download.
70 Coronis Fusion 10MP
Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom
of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General
Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax
criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain
by limiting the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified
version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a "work based on the library" and a "work that uses the library". The former contains code derived from the
l i b r a r y, w h e r e a s t h e l a t t e r m u s t b e c o m b i n e d w i t h t h e l i b r a r y i n o r d e r t o r u n .
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0.
This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work
based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into
another language. (Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
The act of running a program using the Library is not restricted, and output from such a program is covered only if its
contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether
that is true depends on what the Library does and what the program that uses the Library does.
1.
You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2.
You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all
of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of
any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 71
program that uses the facility, other than as an argument passed when the facility is invoked, then you must
make a good faith effort to ensure that, in the event an application does not supply such function or table, the
facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3.
You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy
of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4.
You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete
corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
5.
A program that contains no derivative of any portion of the Library, but is designed to work with the Library by
being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative
work of the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore
covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the source code is not. Whether this is true is especially
significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true
is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is
legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section
6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6.
As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library
to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer's own use and reverse engineering for debugging such
modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to
the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the
work is an executable linked with the Library, with the complete machine-readable "work that uses the Library",
as object code and/or source code, so that the user can modify the Library and then relink to produce a
modified executable containing the modified Library. (It is understood that the user who changes the contents
Download from Www.Somanuals.com. All Manuals Search And Download.
72 Coronis Fusion 10MP
of definitions files in the Library will not necessarily be able to recompile the application to use the modified
definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses
at run time a copy of the library already present on the user's computer system, rather than copying library
functions into the executable, and (2) will operate properly with a modified version of the library, if the user
installs one, as long as the modified version is interface-compatible with the version that the work was made
with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a
copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs
needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the
executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7.
You may place library facilities that are a work based on the Library side-by-side in a single library together with
other library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that
you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any
other library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
8.
You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as such parties remain in full compliance.
9.
You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate
your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library
or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a
license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions.
You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the
Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 73
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and "any later version", you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number,
you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are
incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
GNU LESSER GENERAL PUBLIC LICENSE, Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU
General Public License, supplemented by the additional permissions listed below.
0.
Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser General Public License, and the "GNU GPL" refers to
version 3 of the GNU General Public License.
"The Library" refers to a covered work governed by this License, other than an Application or a Combined Work as defined
below.
An "Application" is any work that makes use of an interface provided by the Library, but which is not otherwise based on
the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the
Library.
A "Combined Work" is a work produced by combining or linking an Application with the Library. The particular version of
the Library with which the Combined Work was made is also called the "Linked Version".
The "Minimal Corresponding Source" for a Combined Work means the Corresponding Source for the Combined Work,
excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application,
and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the object code and/or source code for the
Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but
excluding the System Libraries of the Combined Work.
1.
You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
Exception to Section 3 of the GNU GPL.
If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an
Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a
copy of the modified version:
a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does
not supply the function or data, the facility still operates, and performs whatever part of its purpose remains
meaningful, or
Download from Www.Somanuals.com. All Manuals Search And Download.
74 Coronis Fusion 10MP
b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy.
Object Code Incorporating Material from Library Header Files.
3.
The object code form of an Application may incorporate material from a header file that is part of the Library. You may
convey such object code under terms of your choice, provided that, if the incorporated material is not limited to
numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer
lines in length), you do both of the following:
a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its
use are covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license document.
4.
Combined Works.
You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict
modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such
modifications, if you also do each of the following:
a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library
and its use are covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license document.
c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the
Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this
license document.
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding
Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the
Application with a modified version of the Linked Version to produce a modified Combined Work, in the
manner specified by section 6 of the GNU GPL for conveying Corresponding Source.
1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a)
uses at run time a copy of the Library already present on the user's computer system, and (b) will operate
properly with a modified version of the Library that is interface-compatible with the Linked Version.
e) Provide Installation Information, but only if you would otherwise be required to provide such information under
section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a
modified version of the Combined Work produced by recombining or relinking the Application with a modified
version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal
Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the
Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding
Source.)
5.
Combined Libraries.
You may place library facilities that are a work based on the Library side by side in a single library together with other
library facilities that are not Applications and are not covered by this License, and convey such a combined library under
terms of your choice, if you do both of the following:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any
other library facilities, conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
6.
Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from
time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered
version of the GNU Lesser General Public License "or any later version" applies to it, you have the option of following the
terms and conditions either of that published version or of any later version published by the Free Software Foundation.
If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may
choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General
Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you
to choose that version for the Library.
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 75
Download from Www.Somanuals.com. All Manuals Search And Download.
76 Coronis Fusion 10MP
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 77
Download from Www.Somanuals.com. All Manuals Search And Download.
78 Coronis Fusion 10MP
Download from Www.Somanuals.com. All Manuals Search And Download.
Coronis Fusion 10MP 79
K5902031-00
May 2011
Barco n.v.
President Kennedypark 35
8500 Kortrijk
Belgium
0120
Download from Www.Somanuals.com. All Manuals Search And Download.
|