American Standard Indoor Furnishings Triumph Cadet 3 User Manual |
ꢀꢀTRIUMPHꢀCADET®ꢀ3
RIGHTꢀHEIGHT™ꢀELONGATEDꢀTOILET
VITREOUSꢀCHINA
TRIUMPHꢀCADET®ꢀ3ꢀ
RIGHTꢀHEIGHT™ꢀELONGATEDꢀTOILET
❑ 2492.016
• Vitreous china
• EverClean™ anti-microbial surface which
inhibits the growth of stain and odor causing
bacteria, mold, and mildew
• Low-consumption (6.0 Lpf/ꢀ.6 gpf)
• ꢀ6-ꢀ/2" rim height for accessible application
• Features the Cadet®3ꢀFlushingꢀSystem
• Elongated siphon action jetted bowl
• Fully-glazed 2-ꢀ/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect™ tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
768mm
(30-1/4)
FINISHED WALL
25mm 6mm
(1 1/4)
• ꢀ00% factory flush tested
472mm
237mm
(18-9/16)
(9-5/16)
• 5 year warranty
❑ 3016.016 Right Height™ Elongated Bowl
❑ 4007.100 Tank
464mm
(18-1/4)
NominalꢀDimensions:
C/L OF SEAT POST HOLES
784mm
(30-7/8)
140mm (5-1/2 CENTERS)
768 x 472 x 784mm (30-ꢀ/4" x ꢀ8-9/ꢀ6" x 30-7/8")
SUPPLY
AS
REQ'D.
Fixture only, seat and supply by others
419mm
(16-1/2)
AlternateꢀTankꢀConfigurationsꢀAvailable:
❑ 4007.500 Tank complete with Aquaguard Liner
*352mm
(13-7/8)
*203mm
(8)
238mm
(9-3/8)
213mm
(8-3/8)
356mm
(14)
ComplianceꢀCertificationsꢀ-
FINISHED
FLOOR
*152mm
(6)
MeetsꢀorꢀExceedsꢀtheꢀFollowingꢀSpecifications:
• ASME Aꢀꢀ2.ꢀ9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
305mm
(12)
C/L OF OUTLET
NOTES:
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (ꢀ2") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard Aꢀꢀ2.ꢀ9.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
ToꢀBeꢀSpecified:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: #5325.0ꢀ0 Elongated Champion® Slow Close
solid plastic seat and cover with easy lift off feature
❏ Seat: #5284.0ꢀ6 Elongated EverClean™
ꢀanti-microbial solid plastic seat and cover
❏ Seat: #53ꢀꢀ.0ꢀ2 Elongated Laurel molded wood
seat and cover
❏ Supply with stop:
ꢀ
© 2007 American Standard Inc.
Revised 08/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|