Alcatel Carrier Internetworking Solutions Modem 350I User Manual

SPEED TOUCH

350i

CLI Reference Guide

ADSL Modem for ISDN

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bridge Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Config Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DHCP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DNS Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Phonebook Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

PPTP Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Software Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

System Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

10 TD Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

3 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

4 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Preface

Welcome to the Alcatel SpeedToucht350i Command Line Interface Reference Guide !

This Reference Guide aims to give the fastidious user a concise, practical and easy to use document

for configuring the SpeedToucht350i via its character based Command Line Interface.

Although the SpeedToucht350i Web interface is adequate enough for most users, access via the

CLI may be still important for advanced and detailed configuration and troubleshooting.

This CLI Reference Guide covers the CLI commands of the following Alcatel DSL SpeedTouch

product:

Alcatel SpeedToucht350i

The Reference Guide consists of three main parts:

Part 1 : CLI Navigation

This part is meant to make the user familiar with the use and operation of the

SpeedToucht350i CLI. Next to describing the various access methods to the CLI, this part will

describe in brief some general manipulations to navigate through and to perform some

operations on the CLI.

Part 2 : CLI Command Description

This part forms the main part of this Reference Guide. Here all available CLI commands of the

SpeedToucht350i products are alphabetically described per group selection.

Each command is described in a systematic manner:

The full name of the CLI command (including the group selection)

A short description of the CLI command, if needed completed by a description of the

possible impact on the user and/or the SpeedToucht350i

The syntax of the command with a description of each parameter

An example to demonstrate the use of the CLI command

A list of related CLI commands.

Part 3 : CLI Command Index

This part allows the user to look up a command alphabetically in its incomplete form.

5 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Preface

Trademarks

The following trademarks are used in this document:

Speed Touch is a trademark of the Alcatel Company

Netscape and Netscape Navigator are registered trademarks of Netscape

Communications Corporation

Windows and Internet Explorer are trademarks of Microsoft Corporation

Apple and Mac OS are registered trademarks of Apple Computer Inc.

UNIX is a registered trademark of UNIX System Laboratories, Inc.

Ethernet is a trademark of Xerox Corporation.

Other products may be trademarks or registered trademarks of their respective manufacturers.

Updates

Due to the continuous evolution of the Alcatel DSL technology, existing products are regularly

upgraded. Alcatel documentation changes accordingly.

For more information on the newest technological changes and documents, please consult the

Alcatel web site at following URL:

http://www.alcatel.com

http://www.alcateldsl.com

Directive

Unless expressly and unambiguously approved by Alcatel, you may not:

disassemble, deĆcompile, reverse engineer, trace or otherwise analyze the equipment, its

content, operation, or functionality, or otherwise attempt to derive source code (or the

underlying ideas, algorithms, structure or organization) from the equipment or from any

other information provided by Alcatel, except to the extent that this restriction is expressly

prohibited by local law;

copy, rent, loan, reĆsell, sublicense, or otherwise transfer or distribute the equipment to

others;

modify, adapt or create a derivative work of the equipment;

remove from any copies of the equipment any product identification, copyright or other

notices;

disseminate performance information or analysis (including, without limitation,

benchmarks) from any source relating to the equipment.

Such acts not expressly approved by Alcatel will result in the loss of product warranty and will

invalidate the user's authority to operate this equipment.

6 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Alcatel

SpeedTouch 350i

CLI Navigation

7 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessing the Command Line Interface

EndĆusers can access the Command Line Interface via a Telnet session. However, this requires that

TCP/IP connectivity exists between the host from which the Telnet session is opened and the

SpeedToucht350i.

Access via a Telnet Session

As soon a session to the CLI is opened, the SpeedToucht350i banner pops up, followed by the

CLI prompt.

In case the SpeedToucht350i is protected by a System password authentication will be required

before access is granted.

The following figure shows an example of the SpeedToucht350i banner after opening a Telnet

session and authentication.

EXAMPLE:

/home/doejohn{1}$ telnet 10.0.0.138

Trying 10.0.0.138...

Connected to 10.0.0.138.

Escape character is ’^]’.

User :

SpeedTouch (00–90–D0–00–01–23–45)

Password : ######

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

______

___/_____/\

/\\

Alcatel Speed Touch(TM)350i

/ \\ ADSL Modem for ISDN

_____/__

_/ /\_____/___ \

_______//_______/

Version R3.2

/\ \

/ \

\ /

/ \

/ /

/ _\__

/ / /\

* __/

* / /

\_______\/

* /_/______/___________________/ /________/ /___/ \

* \ \

* \_\

___________

/ \

\ \

\ \ \ /

\ \___\/

\ /

\_____/

/__________/

\ _____ \

\ / /\ \

/____/ \ \ /

\ /___\/

\____\/

\ \________\/

\ /

/_____\/

/___\/

9 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Navigation and Manipulation

Manipulation commands are commands that manipulate operations on the command line, for

example changing the command group, go to the beginning of the command line, go to the end of

the command line, etc.

Command group Navigation

From top level, you can change to a command group by executing the name of the desired

command group.

To obtain a list of all available command groups, execute help from the top level.

EXAMPLE:

=>help

Following command groups are available :

config

pptp

system

bridge

software

atmf

phonebook

dns

dhcp

To return to top level, execute exit.

EXAMPLE:

=>phonebook

[phonebook]=>

[phonebook]=>exit

10 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

The Help Command

Execute help from top level to list all available command groups for the SpeedToucht350i.

EXAMPLE (SpeedTouchtPro):

=>help

Following command groups are available :

config

pptp

system

bridge

software

atmf

phonebook

dns

dhcp

You can execute the help command from each command group selection. This results in a list of

the available commands (and nested command groups, if available) in this particular command

group.

EXAMPLE:

=>phonebook

[phonebook]=>

[phonebook]=>help

Following commands are available :

list

load

add

autolist

delete

help

save

exit

flush

[phonebook]=>

Executing e.g. help phonebook from top level gives the same result as executing help from the

phonebook command group selection.

EXAMPLE:

=>phonebook help

Following commands are available :

list

load

add

autolist

delete

help

save

exit

flush

11 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Entering help followed by a specific command, e.g. help phonebook add (starting from top level)

or help add (e.g. on the phonebook command group selection) results in a description of the

syntax for the command.

EXAMPLE:

=>help phonebook add

add : Adds a phonebook entry

name=<string>

addr=<vp*vc>

type=<bridge|ppp|cip|pptp>

Command Completion

The CLI features command completion, which means that when starting to enter a command it can

be completed by pressing the Tab" key.

For example, entering a at the firewall command group selection, followed by a Tab" stroke

results in the full assign command being completed. Entering firewall a from top level gives the

same result.

For the completion to be successful, the part to be added must be unique. Completion works for the

command groups, for the commands, for the options, but not for values.

EXAMPLE:

=>phonebook

[phonebook]=>d “Tab“

[phonebook]=>delete

Going to the beginning or end of the Command Line

Go to the beginning of the Command Line by pressing "Ctrl+A"; to go to the end of the

Command Line press "Ctrl+E".

In the following example, the first ø indicates the position of the cursor after pressing "Ctrl+A", the

second ø the position of the cursor after pressing "Ctrl+E".

EXAMPLE:

=>ø list

Breaking off Commands

12 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

You can break off a command by pressing Ctrl+G". This can be useful in a situation where a user

is prompted to enter a value which it does not know and wants to abort the command. Instead of

being prompted over and over again for the same value, this allows to break of the command.

In the example below Ctrl+G" is pressed after the third prompt `name =`. The command is

broken of and the user returns to the command line.

EXAMPLE:

[phonebook]=>add

name =

name = Ctrl+G"

[phonebook]=>

History of Commands

To retake previous commands press the up arrow ° and come back to more recent commands

with the down arrow ± . Press Enter (↵)" to select and execute the retaken command.

EXAMPLE:

=>phonebook

[phonebook]=>list

Name

Br1

Br2

Br3

Br4

address

8*35

8*36

8*37

8*38

type

usage

configured

free

configured

bridge

pptp

RELAY_PPP1 8*48

RELAY_PPP2 8*49

RELAY_PPP3 8*50

RELAY_PPP4 8*51

[phonebook]=> °

[phonebook]=>:phonebook list

13 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Command Line Interface Top Level Structure

The following command groups are available:

bridge

config

dhcp

dns

phonebook

pptp

software

system

14 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Command Line Interface Commands

All CLI commands are commands that operate on, or configure, the SpeedToucht350i.

You can execute these commands from top level, preceded by the name of the command group

from which the command should be executed (e. g. phonebook list).

You can also execute the commands from the command group itself, using the reduced form of the

command (e.g. list at the phonebooke command group selection).

EXAMPLE:

=>phonebook autolist

8.35

8.36

=>phonebook

[phonebook]=>autolist

8.35

8.36

[firewall]=>

Instead of entering a completely builtĆup command with all its parameters, you can also enter just

the command itself, without its parameters. After this you are prompted to complete the command

with the required and the optional parameters. For the optional parameters you can simply press

enter without giving a value.

The example below is the equivalent of `phonebook add name=Test addr=8*33 type=pptp`.

To break of such incomplete command press Ctrl+G".

EXAMPLE:

=>phonebook add

name=Test

addr=8*33

type=pptp

15 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct FTP Access

The SpeedToucht350i File System

The SpeedTouch 350i permanent storage, further referred to as 'file system', exists of nonvolatile

memory responsible for storing, retrieving and maintaining the SpeedTouch 350i software

image(s) and configuration files.

The file system of the SpeedTouch 350i is accessible via the FTP transport protocol. This allows to

transfer the SpeedTouch 350i software image(s) and/or configuration profile files.

Moreover, via FTP's quote sitecommand you can execute CLI commands from the FTP prompt.

Proceed as indicated in the exmaple below to open an FTP session to the SpeedTouch 350i file

system:

EXAMPLE:

/home/doejohn{1}$ftp 10.0.0.138

Connected to 10.0.0.138

220 Inactivity timer = 120 seconds. Use ’site idle <secs>’ to change.

Name (10.0.0.138:doejohn):

331 SpeedTouch (00-90-D0-01-02-03) User ’doejohn’ OK. Password required.

Password : ######

330 OK

ftp>

SpeedToucht350i File System Structure

The files system features a tiny multilevel directory structure with a single root node called 'root' and

two leaf nodes called 'active' and 'dl'.

The 'root' contains next to the two subdirectories 'active' and 'dl' all necessary files for the

SpeedTouch 350i to boot correctly.

The 'active' subdirectory always contains the software image in execution. The 'active' subdirectory

may also contain one or more .ini configuration files. These files are created seperately via the CLI

save command (per command group) or as a complete set of configuration files via the web page

'Save all' button or the CLI :config save command.

In other words, after each 'Save all', or config save call, the configuration files present in the 'active'

subdirectory reflect the current configuration of the SpeedTouch 350i.

The 'dl' directory contains the dormant software image, if present.

16 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

SpeedToucht350i File System Access Rights

Following access rights apply on the file system:

'root' Directory

Listing of 'root' directory files (dir)

'active' Subdirectory

Listing of 'active' subdirectory files (dir)

FTP (m)get of (multiple) 'active' subdirectory files

'dl' Subdirectory

Listing of 'dl' subdirectory files (dir)

FTP (m)get of (multiple) 'dl' subdirectory files

FTP (m)put of (multiple) 'dl' subdirectory files

FTP (m)delete of (multiple) 'dl' subdirectory files..

FTP File Transfer

To allow correct file transfers the transfer mode must be set to binary". Moreover, it is suggested to

turn on the hashing option to be able to see how the file transfer proceeds:

EXAMPLE:

/home/doejohn{1}$ftp 10.0.0.138

Connected to 10.0.0.138

220 Inactivity timer = 120 seconds. Use ’site idle <secs>’ to change.

Name (10.0.0.138:doejohn):

331 SpeedTouch (00-90-D0-01-02-03) User ’doejohn’ OK. Password required.

Password : ######

330 OK

ftp>

ftp>bin

200 TYPE is now 8-bit binary

ftp>

ftp>hash

200Hash mark printing on (8192 byts/hash mark).

ftp>

Customization, BackĆup and Restore of Configuration Files

For more information on the possibilities of the Alcatel SpeedTouch 350i, configuration files and

file system, please check the Alcatel support pages at:

http://www.alcatel.com

http://www.alcateldsl.com

Or contact your local Alcatel Sales representative.

17 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

18 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Alcatel

SpeedTouch 350i

CLI Command Description

19 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

20 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge (to access the Bridge level)

bridge config

bridge flush

bridge load

bridge macadd

bridge macdelete

bridge maclist

bridge portadd

bridge portconfig

bridge portdelete

bridge portlist

bridge save

21 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge config

Show/set bridge aging policy.

SYNTAX:

bridge config

[age = <number {10 Ć 100000}>]

[age]

A number between 10 and 100000 (seconds).

Represents the lifetime of a dynamically learned MAC address.

By default the aging timer is 300 seconds.

OPTIONAL

EXAMPLE:

=>bridge config

Aging : 300

=>bridge config age=600

=>bridge config

Aging : 600

22 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge flush

Flush complete bridging configuration.

The flush command does not impact previously saved configurations.

SYNTAX:

bridge flush

EXAMPLE:

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

fcs: off

RX bytes: 75

TX bytes: 30246

state: forwarding

vci: 35

compression: off

frames: 12

frames: 91

=>bridge flush

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689 frames: 425

dropframes: 5558017

RELATED COMMANDS:

bridge load

bridge save

Load saved or default bridge configuration.

Save current bridge configuration.

23 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge load

Load saved (or default) bridge configuration.

SYNTAX:

bridge load

[{saved|defaults}]

bridge load

Load saved bridge configuration.

Load default bridge configuration.

bridge load saved

bridge load defaults

RELATED COMMANDS:

bridge flush

bridge save

Flush complete bridge configuration.

Save current bridge configuration.

24 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge macadd

Add a static MAC address to the filtering database. Allows to manually add static addresses, which

should normally be dynamically discovered by the bridge itself.

SYNTAX:

bridge macadd

port = <name>

hwaddr = <hardwareĆaddress>

intf

The name of the bridge interface to add the MAC address for.

The MAC address of the new entry.

REQUIRED

hwaddr

EXAMPLE:

=>bridge maclist

00:90:d0:01:02:03 ––

ff:ff:ff:ff:ff:ff ––

01:80:c2:00:00:00 ––

01:80:c2:00:00:01 ––

...

01:80:c2:00:00:10 ––

00:01:42:5f:7d:81 ––

00:50:8b:31:cc:aa ––

08:00:20:c1:9a:12 ––

...

static,

OBC

static,

OBC

dynamic,

eth0, 597 seconds

eth0, 513 seconds

eth0, 600 seconds

=>bridge macadd port=eth0 hwaddr=00:80:9f:01:23:45

=>bridge maclist

00:90:d0:01:02:03 ––

ff:ff:ff:ff:ff:ff ––

01:80:c2:00:00:00 ––

01:80:c2:00:00:01 ––

...

static,

OBC

01:80:c2:00:00:10 ––

00:80:9f:01:23:45 ––

00:01:42:5f:7d:81 ––

00:50:8b:31:cc:aa ––

08:00:20:c1:9a:12 ––

00:08:c7:c3:5f:fc ––

...

static,

permanent,OBC

dynamic,

OBC

eth0, 598 seconds

eth0, 379 seconds

eth0, 600 seconds

eth0, 215 seconds

dynamic,

RELATED COMMANDS:

bridge macdelete

bridge maclist

Delete a MAC address entry.

Show current filtering database.

25 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge macdelete

Remove a MAC address from the filtering database.

SYNTAX:

bridge macdelete

hwaddr = <hardwareĆaddress>

hwaddr

The MAC address of the entry to delete.

REQUIRED

EXAMPLE:

=>bridge maclist

00:90:d0:01:02:03 ––

ff:ff:ff:ff:ff:ff ––

01:80:c2:00:00:00 ––

01:80:c2:00:00:01 ––

...

01:80:c2:00:00:10 ––

00:80:9f:01:23:45 ––

00:01:42:5f:7d:81 ––

00:50:8b:31:cc:aa ––

08:00:20:c1:9a:12 ––

...

static,

OBC

static,

permanent,OBC

dynamic,

OBC

eth0, 597 seconds

eth0, 513 seconds

eth0, 600 seconds

=>bridge macdelete hwaddr=00:80:9f:01:23:45

=>bridge maclist

00:90:d0:01:02:03 ––

ff:ff:ff:ff:ff:ff ––

01:80:c2:00:00:00 ––

01:80:c2:00:00:01 ––

...

01:80:c2:00:00:10 ––

00:01:42:5f:7d:81 ––

00:50:8b:31:cc:aa ––

08:00:20:c1:9a:12 ––

00:08:c7:c3:5f:fc ––

...

static,

OBC

static,

OBC

dynamic,

eth0, 598 seconds

eth0, 379 seconds

eth0, 600 seconds

eth0, 215 seconds

RELATED COMMANDS:

bridge macadd

bridge maclist

Add a static MAC address entry.

Show current filtering database.

26 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge maclist

Show current MAC address filtering database.

SYNTAX:

bridge maclist

EXAMPLE:

=>bridge maclist

00:90:d0:01:02:03 ––

ff:ff:ff:ff:ff:ff ––

01:80:c2:00:00:00 ––

01:80:c2:00:00:01 ––

...

01:80:c2:00:00:10 ––

00:80:9f:24:ab:cf ––

00:01:42:5f:7d:81 ––

00:50:8b:31:cc:aa ––

08:00:20:c1:9a:12 ––

00:08:c7:c3:5f:fc ––

08:00:20:a8:f4:34 ––

08:00:20:83:b7:26 ––

00:10:83:1b:13:18 ––

...

static,

OBC

static,

OBC

dynamic,

eth0, 598 seconds

eth0, 379 seconds

eth0, 600 seconds

eth0, 215 seconds

eth0, 600 seconds

eth0, 599 seconds

RELATED COMMANDS:

bridge macadd

Add a static MAC address entry.

Delete a MAC address entry.

bridge macdelete

27 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge portadd

Create a bridge interface.

SYNTAX:

bridge portadd

dest = <vp*vc|name>

[proto = {vcĆmux|llc}]

[vc_mux_fcs = {off|on}]

dest

The destination address for the new interface.

Typically a phonebook entry.

REQUIRED

[encaps]

The type of encapsulation to be used for this bridge interface. Choose OPTIONAL

between:

llc/snap

vcmux

[vc_mux_fcs]

Whether or not to include the Ethernet FCS in the packet header on

the WAN side. Choose between:

OPTIONAL

off

EXAMPLE:

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689 frames: 425

dropframes: 5558017

=>bridge portadd dest=Br1 proto=vc-mux vc_mux_fcs=on

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

fcs: on

RX bytes: 0

TX bytes: 0

state: forwarding

vci: 35

compression: off

frames: 0

RELATED COMMANDS:

bridge portdelete

bridge portconfig

bridge portlist

Delete a bridge interface.

Configure a bridge interface.

Show current bridge configuration.

28 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge portconfig

Configure a bridge interface.

SYNTAX:

bridge portconfig

port = <name>

[state = <{disabled|learning|forwarding}>]

The name of the bridge interface to configure.

The bridge portstate for this interface. Choose between:

port

REQUIRED

OPTIONAL

[state]

disabled

learning

forwarding

EXAMPLE:

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

fcs: on

RX bytes: 0

TX bytes: 0

state: forwarding

vci: 35

compression: off

frames: 0

=>bridge portconfig port=Br1 state=learning

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

state: learning

vci: 35

fcs: on

RX bytes: 0

TX bytes: 0

compression: off

frames: 0

RELATED COMMANDS:

Create a bridge interface.

Delete a bridge interface.

bridge portadd

bridge portdelete

bridge portlist

Show current bridge configuration.

29 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge portdelete

Delete a bridge interface.

bridge portdelete

port = <name>

port

The name of the interface name to delete.

REQUIRED

EXAMPLE:

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

fcs: on

RX bytes: 0

TX bytes: 0

state: forwarding

vci: 35

compression: off

frames: 0

=>bridge portdelete port=Br1

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

RELATED COMMANDS:

bridge portadd

bridge portconfig

bridge portlist

Create a bridge interface.

Configure a bridge interface.

Show current bridge configuration.

30 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge portlist

Show all current bridge interfaces.

SYNTAX:

bridge portlist

EXAMPLE:

=>bridge portlist

OBC

state: forwarding

frames: 572

RX bytes: 75783

TX bytes: 82768372

frames: 341221

dropframes: 0

eth0

state: forwarding

RX bytes: 156344216 frames: 5899238

TX bytes: 75689

frames: 425

dropframes: 5558017

protocol: vc-muc

dropframes: 0

Br1

vpi: 8

fcs: off

RX bytes: 75

TX bytes: 30246

state: forwarding

vci: 35

compression: off

frames: 12

frames: 91

DESCRIPTION:

`RX bytes` indicates the number of Received bytes, `TX bytes` the number of Transmitted bytes. OBC

is short for On Board Controller and indicates the physical bridge port.

RELATED COMMANDS:

bridge portadd

bridge portconfig

bridge portdelete

Create a bridge interface.

Configure a bridge interface.

Delete a bridge interface.

31 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Bridge Commands

bridge save

Save current bridge configuration.

SYNTAX:

bridge save

RELATED COMMANDS:

bridge flush

bridge load

Flush complete bridge configuration.

Load saved or default bridge configuration.

32 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config (to access the Config level)

config erase

config flush

config load

config reset

config save

33 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config erase

Physically remove all saved configurations.

SYNTAX:

config erase

RELATED COMMANDS:

config flush

config load

config reset

config save

Flush complete runtime configuration.

Load complete saved or default configuration.

Flush current and optionally restore default configuration.

Save complete runtime configuration.

34 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config flush

Flush complete current configuration without affecting saved configurations.

This combines all flush commands: bridge flush, dhcp flush, dns flush, phonebook flush, pptp

flush, system flush and optionally ip flush.

SYNTAX:

config flush

[keep_ip = <{no|yes}>]

[keep_ip]

Keep current IP configuration (yes) or not (no).

Not keeping the IP settings could cause lost IP connectivity in the LAN.

By default IP settings are preserved.

OPTIONAL

RELATED COMMANDS:

config erase

config load

config reset

config save

Physically remove all saved configurations.

Load complete saved or default configuration.

Flush current and optionally restore default configuration.

Save current runtime configuration.

35 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config load

Load complete saved or default configuration. Execute config flush prior to config load.

In case the saved configuration is loaded (defaults=no) this combines all load commands: bridge

load, dhcp load, dns load, phonebook load, pptp load, system load and optionally ip load.

SYNTAX:

config load

[load_ip = <{no|yes}>]

[config_set = {saved|defaults}]

[load_ip]

Load IP settings (yes) or not (no).

OPTIONAL

Not specifying thisd parameter preserves the current IP configuration.

[config_set]

Load saved configuration (saved) or default configuration (defaults).

Not specifying this parameter loads the saved configuration

RELATED COMMANDS:

config erase

config flush

config reset

config save

Physically remove all saved configurations.

Flush complete runtime configuration.

Flush current and optionally restore default configuration.

Save current runtime configuration.

36 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config reset

Flush current runtime configuration and restore factory default configuration. Optionally the

runtime, saved IP configuration can be preserved.

SYNTAX:

config reset

[keep_ip = <{no|yes}>]

[keep_ip]

Keep IP settings (yes) or not (no).

OPTIONAL

Not keeping the IP settings could cause lost IP connectivity in the LAN.

RELATED COMMANDS:

config erase

config flush

config load

config save

Physically remove all saved configurations.

Flush complete current configuration.

Load complete saved or default configuration.

Save current runtime configuration.

37 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Config Commands

config save

Save all existing configurations and modifications entered by the user.

This combines all save commands: bridge save, config save, dhcp save, dns save, ip save,

phonebook save, pptp save, and system save.

SYNTAX:

config save

RELATED COMMANDS:

config erase

config flush

config load

config reset

Physically remove all saved configurations.

Flush complete current configuration.

Load complete saved or default configuration.

Flush current and optionally restore default configuration.

38 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp add

dhcp client

dhcp clrstats

dhcp config

dhcp delete

dhcp flush

dhcp list

dhcp load

dhcp policy

dhcp save

dhcp start

dhcp stats

dhcp status

dhcp stop

dhcp troff

dhcp tron

39 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp add

Assign a static IP address to a host in the local network. This address is allocated on a permanent

basis, and is excluded from the pool of addresses used by the SpeedToucht350i DHCP server.

SYNTAX:

dhcp add

clientid = <clientĆid>

addr = <ipĆaddress>

[leasetime = <number>]

[hostname = <hostname>]

clientid

addr

The DHCP client's MAC address.

The IP address for this DHCP host.

REQUIRED

OPTIONAL

[leasetime]

A number between 0 and 1814400 (seconds).

Represents the preferred time the client wants to use an address.

By default the leasetime is 7200 seconds (2 hours).

Specifying -1 makes the lease permanent.

[hostname]

The hostname to add to the local DNS table for this host.

OPTIONAL

EXAMPLE:

=>dhcp list

Leases:

Lease 0:

01:00:A0:24:AE:66:E1

= Default

Hostname

ip address: 10.0.0.8

expires in: 1 h, 16 min, 20 sec

lease is being used.

Total size of table: 36, in use: 1 free: 97 %

=>dhcp add clientid=01:23:45:67:89:ab addr=10.0.0.1 leastime=60 hostname=NewLease

=>dhcp list

Leases:

Lease 0:

01:00:A0:24:AE:66:E1

= Default

Hostname

ip address: 10.0.0.8

expires in: 1 h, 15 min, 32 sec

lease is being used.

Lease 1:

01:23:45:67:89:AB

Hostname

= NewLease

ip address: 10.0.0.1

expires in: 23 sec

lease is being used.

Total size of table: 36, in use: 2 free: 94 %

RELATED COMMANDS:

dhcp delete

dhcp list

Delete a DHCP lease.

Show current DHCP leases.

40 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp client

Set the AutoDHCP client timeĆout in startup phase. Only applicable in AutoDHCP mode (See

dhcp policy command).

SYNTAX:

dhcp client

timeout = <number>

timeout

A number between 0 and 1814400 (seconds).

Represents the time to look for another DHCP server.

Specifying `Ć1` will make the timeout infinite: the SpeedToucht350i

will remain client.

REQUIRED

By default the timeout is 20 seconds.

EXAMPLE:

=>dhcp status

DHCP Server Status:

Running

Current configuration:

Address Range: 10.0.0.1 ... 10.255.255.254

.......

Start–up client parameters:

Timeout:

Tracing: off

Memory usage:

Leases: total: 36, in use: 7 free: 80 %

=>dhcp client timeout=15

20 sec

=>dhcp status

DHCP Server Status:

Current configuration:

Running

Address Range: 10.0.0.1 ... 10.255.255.254

.......

Start–up client parameters:

Timeout: 15 sec

Tracing: off

Memory usage:

Leases: total: 36, in use: 7 free: 80 %

RELATED COMMANDS:

dhcp policy

dhcp start

dhcp status

dhcp stop

Set DHCP policy.

Start DHCP server.

Show current DHCP server configuration.

Stop DHCP server.

41 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp clrstats

Clear SpeedToucht350i DHCP server statistics.

SYNTAX:

dhcp clrstats

EXAMPLE:

=>dhcp stats

DHCP server statistics:

Corrupted packet recv :

DISCOVER

9575

REQUEST

DECLINE

RELEASE

INFORM

Pure BOOTP REQUESTS

Other message types

OFFERs sent

ACKs sent

121

9552

121

NAKs sent

Lease table got full

Ping table got full

: no

Second DHCP server seen : no

=>dhcp clrstats

=>dhcp stats

DHCP server statistics:

Corrupted packet recv :

DISCOVER

REQUEST

DECLINE

RELEASE

INFORM

Pure BOOTP REQUESTS

Other message types

OFFERs sent

ACKs sent

NAKs sent

Lease table got full

Ping table got full

: no

Second DHCP server seen : no

RELATED COMMANDS:

dhcp stats

Show DHCP server statistics.

42 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp config

Set SpeedToucht350i DHCP server configuration.

Execute dhcp status to see the actual status and configuration.

SYNTAX:

dhcp config

[beginrange = <ipĆaddress>]

[endrange = <ipĆaddress>]

[netmask = <ipĆaddress>]

[leasetime = <number>]

[gateway = <{ipĆaddress|0}>]

[dnsaddr = <{ipĆaddress|0}>]

beginrange

endrange

The lowest IP address in the DHCP address range to use for leasing.

Default value of this parameter is 10.0.0.1.

OPTIONAL

The highest IP address in the DHCP address range to use for leasing. OPTIONAL

Default value of this parameter is 10.255.255.254.

netmask

The applicable netmask for the DHCP leases.

OPTIONAL

leasetime

A number between 0 and 1814400 (seconds).

Represents the time for which a client can use its dynamically

allocated IP address.

By default the leasetime is 2 hours (7200 seconds).

Specifying -1 makes the lease permanent.

gateway

dnsaddr

The IP address of the gateway for DHCP clients.

OPTIONAL

The IP address of the DNS server for DHCP clients.

Entering '0' sets the SpeedTouch t350i as DNS server.

43 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

EXAMPLE:

=>dhcp status

DHCP Server Status:

Running

Current configuration:

Address Range: 10.0.0.1 ... 10.255.255.254

Netmask: 255.0.0.0

Lease time: 10800 seconds

Gateway (default router): 10.0.0.138

DNS server: 10.0.0.1

Domain name: lan

Policies:

Verify first:no

Trust client:yes

Spoofing: no

Start as client: yes

Start–up client parameters:

Timeout: 15 sec

Tracing: off

Memory usage:

Leases: total: 36, in use: 7 free: 80 %

=>dhcp server config beginrange=172.16.0.2endrange=172.16.0.122netmask=255.0.0.0

leasetime=21600 gateway=172.16.0.1dnsaddr=172.16.0.254

=>dhcp status

DHCP Server Status:

Running

Current configuration:

Address Range: 172.16.0.2 ... 172.16.0.122

Netmask: 255.0.0.0

Lease time: 21600 seconds

Gateway (default router): 172.16.0.1

DNS server: 172.16.0.254

Domain name: lan

Policies:

Verify first:no

Trust client:yes

Spoofing: no

Start as client: yes

Start–up client parameters:

Timeout: 15 sec

Tracing: off

Memory usage:

Leases: total: 36, in use: 7 free: 80 %

RELATED COMMANDS:

dhcp status

Show current DHCP server configuration.

44 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp delete

Delete a DHCP lease.

SYNTAX:

dhcp delete

index = <number>

index

The index number of the entry to be deleted.

REQUIRED

Execute dhcp list to see a list of the index numbers of all current

DHCP leases.

EXAMPLE:

=>dhcp list

Leases:

Lease 0:

01:00:A0:24:AE:66:E1

Hostname

= Default

ip address: 10.0.0.8

expires in: 1 h, 16 min, 20 sec

lease is being used.

Lease 1:

01:23:45:67:89:AB

Hostname

= NewLease

ip address: 10.0.0.1

expires in: 23 sec

lease is being used.

Total size of table: 36, in use: 2 free: 94 %

=>dhcp delete index=1

=>dhcp list

Leases:

Lease 0:

01:00:A0:24:AE:66:E1

= Default

Hostname

ip address: 10.0.0.8

expires in: 1 h, 15 min, 32 sec

lease is being used.

Total size of table: 36, in use: 1 free: 97 %

RELATED COMMANDS:

dhcp add

dhcp list

Add a DHCP lease manually.

Show current DHCP leases.

45 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp flush

Flush complete DHCP server configuration and dynamic leases.

The flush command does not impact previously saved configurations.

SYNTAX:

dhcp flush

EXAMPLE:

=>dhcp list

Leases:

Lease 2:

01:52:41:53:20:A0:1B:A7:EB:AD:3C:C0:01:01:00:00:00

ip address: 10.0.7.79

expires in: 11 sec

lease is not being used.

Lease 0:

01:00:A0:24:AE:66:E1

Hostname

= Default

ip address: 10.0.0.8

expires in: 1 h, 16 min, 20 sec

lease is being used.

Lease 3:

01:23:55:67:89:AB

Hostname

= Tempo

ip address: 10.0.0.1

never expires!

lease is not being used.

Total size of table: 36, in use: 3 free: 93 %

=>dhcp flush

=>dhcp list

No active leases

Total size of table: 36, in use: 0 free: 100 %

RELATED COMMANDS:

dhcp load

Load saved or default DHCP server configuration and permanent

leases.

dhcp save

Save current DHCP server configuration and permanent leases.

46 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp list

List current DHCP leases, indicated by their index number.

SYNTAX:

dhcp list

EXAMPLE OUTPUT:

=>dhcp list

Leases:

Lease 2:

01:52:41:53:20:50:6D:C0:40:02:32:C0:01:01:00:00:00

ip address: 10.0.7.142

expires in: 3 sec

lease is not being used.

Lease 3:

01:52:41:53:20:A0:1B:A7:EB:AD:3C:C0:01:01:00:00:00

ip address: 10.0.7.143

expires in: 17 sec

lease is not being used.

Lease 5:

01:52:41:53:20:F0:90:8F:09:E1:35:BE:01:01:00:00:00

ip address: 10.0.7.144

expires in: 55 sec

lease is not being used.

Lease 6:

01:52:41:53:20:30:F4:89:5F:9B:44:C0:01:01:00:00:00

ip address: 10.0.7.145

expires in: 1 min, 6 sec

lease is not being used.

Lease 0:

01:00:A0:24:AE:66:E1

Hostname = Default

ip address: 10.0.0.8

expires in: 1 h, 17 min, 21 sec

lease is being used.

Lease 4:

01:23:55:67:89:AB

Hostname

= Tempo

ip address: 10.0.0.1

never expires!

lease is not being used.

Total size of table: 36, in use: 6 free: 86 %

RELATED COMMANDS:

dhcp add

Add a DHCP lease manually.

Delete a DHCP lease.

Delete complete DHCP server configuration and dynamic leases.

dhcp delete

dhcp flush

47 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp load

Load saved (or default) DHCP server configuration and permanent leases.

SYNTAX:

dhcp load

[{saved|defaults}]

dhcp load

Load saved DHCP server configuration and permanent leases.

Load default DHCP server configuration.

dhcp load saved

dhcp load defaults

RELATED COMMANDS:

dhcp flush

dhcp save

Flush current DHCP server configuration and dynamic leases.

Save DHCP server configuration and permanent leases.

48 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp policy

Set SpeedToucht350i DHCP server policy.

SYNTAX:

dhcp policy

[verifyfirst = <yes|no>]

[trustclient = <yes|no>]

[spoofing]

[client = <yes|no>]

[verifyfirst]

[trustclient]

[spoofing]

[client]

Probe the network for conflicting IP addresses before giving a

OPTIONAL

suggested IP address to the requesting DHCP client (yes) or not (no).

Take the IP address suggested by a DHCP client into account (yes) or OPTIONAL

not (no).

Do not use this parameter.

OPTIONAL

Allow the SpeedToucht350i DHCP server to present itself as DHCP OPTIONAL

client (AutoDHCP mode) at boot time and probe for another DHCP

server on the network for some time before starting the DHCP server

(yes) or immediately start the DHCP server (no).

EXAMPLE:

=>dhcp status

DHCP Server Status:

Running

Current configuration:

.....

Policies:

Verify first:no

Trust client:yes

Spoofing: no

Start as client: yes

.....

=>dhcp policy verifyfirst=yes trustclient=no client=no

=>dhcp status

DHCP Server Status:

Current configuration:

.....

Running

Policies:

Verify first:yes

Trust client:no

Spoofing: no

Start as client: no

.....

RELATED COMMANDS:

dhcp status

Show current DHCP server configuration.

49 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp save

Save complete SpeedToucht350i DHCP server configuration and permanent DHCP leases.

SYNTAX:

dhcp save

RELATED COMMANDS:

dhcp flush

dhcp load

Flush complete DHCP server configuration and dynamic leases

Load saved or default DHCP server configuration and permanent

leases.

50 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp spoof

Do not use this command.

51 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp start

Start SpeedToucht350i DHCP server.

SYNTAX:

dhcp start

EXAMPLE:

=>dhcp status

DHCP Server Status: Stopped

Current configuration:

.....

=>dhcp start

=>dhcp status

DHCP Server Status: Searching for server...

Current configuration:

.....

=>dhcp status

DHCP Server Status: Running

Current configuration:

.....

RELATED COMMANDS:

dhcp status

dhcp stop

Show current DHCP server configuration.

Stop DHCP server.

52 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp stats

Show SpeedToucht350i DHCP server statistics.

SYNTAX:

dhcp stats

EXAMPLE OUTPUT:

=>dhcp stats

DHCP server statistics:

Corrupted packet recv :

DISCOVER

9575

REQUEST

DECLINE

RELEASE

INFORM

Pure BOOTP REQUESTS

Other message types

OFFERs sent

ACKs sent

121

9552

121

NAKs sent

Lease table got full

Ping table got full

: no

Second DHCP server seen : no

DESCRIPTION:

Corrupted packet recv Indicates the number of corrupted packets (not complaint to RFC2131) were

received from the LAN.

DISCOVER

Indicates the number of DHCP server discovery packets were received from the LAN.

These broadcasts are sent by potential DHCP clients to locate available DHCP

servers.

REQUEST

DECLINE

RELEASE

Indicates the number of DHCP address lease requests were received from the LAN.

Indicates the number of DHCP address lease requests that were declined.

Indicates the number of DHCP address release requests that were received from

DHCP clients.

INFORM

Indicates the number of information requests that were received from DHCP clients.

Pure BOOTP requests Indicates the number of BOOTP requests that were received from the LAN.

OFFERs sent Indicates the number of IP address offers were sent in reply to DHCP requests.

53 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

ACKs sent

NAKs sent

Indicates the number of ACKnowledgement replies were sent to successfully

configured DHCP clients.

Indicates the number of NotĆAcKnowledgement replies were sent to wrongly

configured DHCP clients.

Lease table got full

Ping table got full

Indicates whether the maximum number of DHCP leases is reached or not.

Indicates whether the history list of IP address pings got full or not. These pings are

sent by the SpeedToucht350i DHCP server to verify whether the IP address is

already in use on the LAN or not. (dhcp server policy verifyfirst=yes)

Second DHCP server

seen

Indicates whether a concurrent DHCP server was found on the LAN or not.

RELATED COMMANDS:

dhcp clrstats

Clear DHCP server statistics.

54 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp status

Show current DHCP server configuration.

SYNTAX:

dhcp status

EXAMPLE:

=>dhcp status

DHCP Server Status:

Client

Current configuration:

Address Range: 10.0.0.1 ... 10.255.255.254

Netmask: 255.0.0.0

Lease time: 7200 seconds

Gateway (default router): 10.0.0.1 (auto)

DNS server: 10.0.0.1 (auto)

Domain name: office.lan

Policies:

Verify first:no

Trust client:yes

Spoofing: no

Start as client: yes

Spoofing parameters:

Failure timeout (!DoD): 4 sec

Failure lease time (!DoD):60 sec

Temp. lease time (DoD): 10 sec

Start–up client parameters:

Timeout: 20 sec

Tracing: off

Memory usage:

Leases: total: 36, in use: 7 free: 80 %

RELATED COMMANDS:

dhcp stop

dhcp start

dhcp policy

dhcp spoof

Stop DHCP server.

Start DHCP server.

Set DHCP server policy.

Set spoofing parameters.

55 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp stop

Stop SpeedToucht350i DHCP server.

SYNTAX:

dhcp stop

EXAMPLE:

=>dhcp status

DHCP Server Status: Running

Current configuration:

.....

=>dhcp stop

=>dhcp status

DHCP Server Status: Stopped

Current configuration:

.....

RELATED COMMANDS:

dhcp start

Start DHCP server.

Show current DHCP server configuration.

dhcp status

56 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp troff

Disable verbose console logging. No debug traces are generated anymore.

SYNTAX:

dhcp troff

EXAMPLE:

=>dhcp status

DHCP Server Status:

Current configuration:

.....

Tracing: on

.....

=>dhcp troff

=>dhcp status

DHCP Server Status:

Current configuration:

.....

Running

Tracing: off

.....

RELATED COMMANDS:

dhcp status

dhcp tron

Show current DHCP server configuration.

Enable verbose console logging.

57 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3 DHCP Commands

dhcp tron

Enable verbose console logging. Debug traces are generated.

SYNTAX:

dhcp tron

EXAMPLE:

=>dhcp status

DHCP Server Status:

Current configuration:

.....

Tracing: off

.....

=>dhcp tron

=>dhcp status

DHCP Server Status:

Current configuration:

.....

Running

Tracing: on

.....

RELATED COMMANDS:

dhcp status

dhcp troff

Show current DHCP server configuration

Disable verbose console logging.

58 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns (to access the DNS level)

dns add

dns clear

dns clrstats

dns delete

dns domain

dns flush

dns fwdadd

dns fwddelete

dns fwdlist

dns fwdtable

dns list

dns load

dns nslookup

dns save

dns start

dns stats

dns status

dns stop

dns toutfwd

dns troff

dns tron

59 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns add

Add a static DNS entry for IP hosts who do not reveal their hostname in the DHCP request, or even

worse, not support DHCP.

SYNTAX:

dns add

hostname = <string>

[addr = <ipĆaddress>]

hostname

[addr]

The name of the IP host (without the (sub)domain name).

REQUIRED

OPTIONAL

The IP address of the host (without mask).

In case this parameter is not specified the hostname applies to the

SpeedToucht350i itself.

EXAMPLE:

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

10.0.0.8

HTTP_Server

Total Table Size: 73 entries

Amount used: 3 (4%)

=>dns add hostname=FTP_Server addr=10.0.0.7

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

10.0.0.8

HTTP_Server

FTP_Server

10.0.0.7

Total Table Size: 73 entries

Amount used: 4 (5%)

RELATED COMMANDS:

dns list

List current DNS entries.

Delete a DNS entry.

dns delete

60 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns clear

Delete current DNS entries.

SYNTAX:

dns clear

EXAMPLE:

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

10.0.0.8

10.0.0.7

HTTP_Server

FTP_Server

Total Table Size: 73 entries

Amount used: 4 (5%)

=>dns clear

=>dns list

Domain: business.lan

Nr.

Hostname

IP Address

Total Table Size: 73 entries

Amount used: 0 (0%)

RELATED COMMANDS:

dns list

List current DNS entries.

61 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns clrstats

Clear DNS statistics.

SYNTAX:

dns clrstats

EXAMPLE:

=>dns stats

DNS Statistics:

Corrupted packets recv

Local questions resolved

Local neg answers sent

Total DNS packets fwd

External answers recv

Fwd table full, discard

Spurious answers

Unknown query types

Total number of packets received

=>dns clrstats

DNS statistics cleared.

=>dns stats

DNS Statistics:

Corrupted packets recv

Local questions resolved

Local neg answers sent

Total DNS packets fwd

External answers recv

Fwd table full, discard

Spurious answers

Unknown query types

Total number of packets received

RELATED COMMANDS:

dns stats

Show DNS server statistics.

62 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns delete

Delete a DNS entry.

SYNTAX:

dns delete

index = <number>

index

The index number of the entry to be deleted.

REQUIRED

Execute dns list to see a list of the index numbers of all current DNS

entries.

EXAMPLE:

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

HTTP_Server

FTP_Server

10.0.0.8

10.0.0.7

Total Table Size: 73 entries

Amount used: 4 (5%)

=>dns delete index=2

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

FTP_Server

10.0.0.7

Total Table Size: 73 entries

Amount used: 3 (4%)

RELATED COMMANDS:

dns add

dns list

Add a static DNS entry.

List current DNS entries.

63 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns domain

Set local DNS (sub)domain name.

SYNTAX:

dns domain

domain = <string>

domain

The local DNS (sub)domain name.

REQUIRED

EXAMPLE:

=>dns list

Domain: business.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

HTTP_Server

FTP_Server

10.0.0.8

10.0.0.7

Total Table Size: 73 entries

Amount used: 4 (5%)

=>dns domain domain=office.home.lan

=>dns list

Domain: office.home.lan

Nr.

Hostname

SpeedTouch

TestHost

IP Address

*.*.*.*

10.0.0.140

10.0.0.8

HTTP_Server

FTP_Server

10.0.0.7

Total Table Size: 73 entries

Amount used: 4 (5%)

RELATED COMMANDS:

dns list

List current DNS entries.

64 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns flush

Flush complete SpeedToucht350i DNS server configuration and static entries.

The flush command does not impact previously saved configurations.

SYNTAX:

dns flush

EXAMPLE:

=>dns list

Domain: office.home.lan

Nr.

Hostname

Z7V1D8

SpeedTouch

TestHost

Default

IP Address

10.0.0.29

*.*.*.*

10.0.0.140

10.0.0.8

ftpserver

172.16.0.1

Total Table Size: 73 entries

Amount used: 5 (6%)

=>dns flush

=>dns list

Domain: lan

Nr.

Hostname

Z7V1D8

IP Address

10.0.0.29

Total Table Size: 73 entries

Amount used: 1 (1%)

RELATED COMMANDS:

dns save

dns load

Save current DNS server configuration and static entries.

Load saved or default DNS server configuration and static entries.

65 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns fwdadd

Add a DNS forwarding entry. Normally this command should not be used.

SYNTAX:

dns fwdadd

dns = <ipĆaddress>

src = <ipĆaddress>

mask = <ipĆmask (dotted or cidr)>

[direct = <number>]

dns

The IP address of the (remote) DNS server.

REQUIRED

OPTIONAL

src

The source IP address (pool) of the host(s) using this DNS server.

The appropriate source IP (sub)netmask.

mask

[direct]

Determines whether DNS replies are sent directly back to the client

(1) or relayed by the SpeedToucht350i DHCP server's DNS

forwarder (0).

RELATED COMMANDS:

dns fwddelete

dns fwdlist

Delete a DNS forwarding entry.

Show current DNS forwarding entries.

66 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns fwddelete

Delete a DNS forwarding entry. Normally this command should not be used.

SYNTAX:

dns fwddelete

src = <ipĆaddress>

mask = <ipĆmask (dotted or cidr)>

[dns = <ipĆaddress>]

src

The source IP address (pool) of the hosts to remove the entry for.

The source IP (sub)netmask.

REQUIRED

mask

[dns]

The IP address of the (remote) DNS server (in case of multiple DNS

server entries).

OPTIONAL

RELATED COMMANDS:

dns fwdadd

dns fwdlist

Add a DNS forwarding entry.

Show current DNS forwarding entries.

67 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns fwdlist

Show current DNS forwarding entries. Normally this command should not be used.

SYNTAX:

dns fwdlist

RELATED COMMANDS:

dns fwdadd

dns fwddelete

dns fwdtable

Add a DNS forwarding entry.

Delete a DNS forwarding entry.

Show DNS forwarding table.

68 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns fwdtable

Show DNS forwarding table. Normally this command should not be used.

SYNTAX:

dns fwdtable

RELATED COMMANDS:

dns fwdlist

Show current DNS forwarding entries.

69 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns list

Show current DNS entries.

SYNTAX:

dns list

EXAMPLE OUTPUT:

=>dns list

Domain: office.home.lan

Nr.

Hostname

Z7V1D8

SpeedTouch

TestHost

Default

IP Address

10.0.0.29

*.*.*.*

10.0.0.140

10.0.0.8

ftpserver

172.16.0.1

Total Table Size: 73 entries

Amount used: 5 (6%)

EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:

The SpeedToucht350i is configured as DNS server.

=>dns list

Domain: SpeedLAN.local

Nr.

Hostname

SpeedTouch

Server

IP Address

*.*.*.*

10.10.1.1

10.0.0.3

Client

Total Table Size: 73 entries

Amount used: 3 (4%)

RELATED COMMANDS:

dns add

Add a static DNS entry.

dns delete

Delete a DNS entry (via its index number).

70 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns load

Load saved or default SpeedToucht350i DNS server configuration and static DNS entries.

Execute dns flush prior to dns load.

SYNTAX:

dns load

[{saved|defaults}]

dns load

Load saved bridge configuration.

Load default bridge configuration.

dns load saved

dns load defaults

RELATED COMMANDS:

dns flush

dns save

Flush complete DNS server configuration and static entries.

Save current DNS server configuration and static entries

71 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns nslookup

Search the hostname (via a known IP address) or the IP address (via a known hostname) of a DNS

host.

SYNTAX:

dns nslookup

lookup = <string>

lookup

The DNS hostname or IP address to query.

REQUIRED

EXAMPLE:

=>dns list

Domain: office.home.lan

Nr.

Hostname

Z7V1D8

SpeedTouch

TestHost

Default

IP Address

10.0.0.29

*.*.*.*

10.0.0.140

10.0.0.8

ftpserver

172.16.0.1

Total Table Size: 73 entries

Amount used: 5 (6%)

=>dns nslookup lookup=TestHost

Name:

TestHost

Address: 10.0.0.140

=>dns nslookup lookup=10.0.0.29

Name:

Z7V1D8

Address: 10.0.0.29

RELATED COMMANDS:

dns list

List current DNS entries.

72 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns save

Save current SpeedToucht350i DNS server configuration and static entries.

SYNTAX:

dns save

RELATED COMMANDS:

dns flush

dns load

Flush complete DNS server configuration and dynamic entries.

Load saved or default DNS server configuration and static entries.

73 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns start

Start SpeedToucht350i DNS server.

SYNTAX:

dns start

EXAMPLE:

=>dns status

DNS server status: Stopped

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

No dns cache.

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 4, free:84

Tracing: off

=>dns start

DNS server started.

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 4, free:84

No dns cache.

Tracing: off

RELATED COMMANDS:

dns status

dns stop

Show DNS server configuration.

Stop DNS server.

74 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns stats

Show SpeedToucht350i DNS server statistics.

SYNTAX:

dns stats

EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:

The SpeedToucht350i is configured as DNS server.

=>dns list

Domain: SpeedLAN.local

Nr.

Hostname

SpeedTouch

Server

IP Address

*.*.*.*

10.10.1.1

10.0.0.3

Client

Total Table Size: 73 entries

Amount used: 3 (4%)

=>dns stats

DNS Statistics:

Corrupted packets recv

Local questions resolved

Local neg answers sent

Total DNS packets fwd

External answers recv

Fwd table full, discard

Spurious answers

Unknown query types

Total number of packets received

=>(Ping Client.SpeedLAN.local)

=>(CTRL + Q)

dnsd: Internet class type A request received from 10.10.1.1.

dnsd: Client.SpeedLAN.local found in local database.

dnsd: Client.SpeedLAN.local resolved into 10.0.0.3.

=>(Ping Server.SpeedLAN.local)

dnsd: Internet class type A request received from 10.10.1.1.

dnsd: Server.SpeedLAN.local found in local database.

dnsd: Server.SpeedLAN.local resolved into 10.0.0.3.

=>(CTRL + S)

=>dns stats

DNS Statistics:

Corrupted packets recv

Local questions resolved

Local neg answers sent

Total DNS packets fwd

External answers recv

Fwd table full, discard

Spurious answers

Unknown query types

Total number of packets received

RELATED COMMANDS:

dns clrstats

Clear DNS server statistics.

75 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns status

Show SpeedToucht350i DNS server configuration.

SYNTAX:

dns status

EXAMPLE OUTPUT:

=>dns status

DNS server status: Stopped

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 0, free:100 %

No dns cache.

Tracing: off

RELATED COMMANDS:

dns flush

dns load

dns save

Flush complete DNS server configuration and dynamic entries.

Load saved or default DNS server configuration and static entries.

Save current DNS server configuration and static entries.

76 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns stop

Stop SpeedToucht350i DNS server.

SYNTAX:

dns stop

EXAMPLE:

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

DNS forwarding dns servers table size

No dns cache.

: 25, in use: 0, free:100 %

Tracing: off

=>dns stop

DNS server stopped.

=>dns status

DNS server status: Stopped

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 0, free:100 %

No dns cache.

Tracing: off

RELATED COMMANDS:

dns status

dns start

Show DNS server configuration.

Start DNS server.

77 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns toutfwd

Set DNS forwarding timeout.

SYNTAX:

dns toutfwd

timeout = <number>

timeout

A number (seconds).

REQUIRED

Represents the query forwarding timeout.

This parameter determines how long the SpeedToucht350i DNS

server should try to contact a (remote) DNS server before

(temporarily) declaring the DNS requests unresolved.

By default the timeout is 15 seconds.

EXAMPLE:

=>dns fwdtable

Forwarding table:

Nr. Ip Address

(port#): id(hex) (expiry)

(54751): 8331 (13 sec)

dns server

10.10.10.112

tries

10.10.10.12

Timeout: 15 seconds

Table size: 10

amount of table used: 1 (10%)

=>dns toutfwd timeout=20

Current timeout: 15 seconds

Timeout set to: 20 seconds

=>dns fwdtable

Forwarding table:

Nr. Ip Address

10.10.10.12

(port#): id(hex) (expiry)

(54751): 8331 (13 sec)

dns server

10.10.10.112

tries

Timeout: 20 seconds

Table size: 10

amount of table used: 1 (10%)

RELATED COMMANDS:

dns fwdtable

dns fwdlist

Show DNS forwarding table.

Show current DNS forwarding entries..

Add a DNS forwarding entry.

dns fwdadd

dns fwddelete

Delete a DNS forwarding entry.

78 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns troff

Disable verbose console messaging. No debug traces are generated.

SYNTAX:

dns troff

EXAMPLE:

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

DNS forwarding dns servers table size

No dns cache.

: 25, in use: 0, free:100 %

Tracing: on

=>dns troff

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 0, free:100 %

No dns cache.

Tracing: off

RELATED COMMANDS:

dns fwdtable

dns fwdlist

dns status

dns tron

Show DNS forwarding table.

Show current DNS forwarding entries..

Show DNS server configuration.

Enable verbose console messaging.

79 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

4 DNS Commands

dns tron

Enable verbose console messaging. Debug traces are generated.

SYNTAX:

dns tron

EXAMPLE:

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

No dns cache.

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 0, free:100 %

Tracing: off

=>dns tron

Tracing on.

=>dns status

DNS server status: Started

DNS table size

DNS forwarding table size

DNS forwarding dns servers table size

No dns cache.

73, in use: 4, free: 94 %

10, in use: 0, free:100 %

: 25, in use: 0, free:100 %

Tracing: on

=>(CTRL + Q)

dnsd:Internet class type A request received from 10.0.0.10.

dnsd:aa.aa.be is outside our domain: forward.

dnsd:forwarding request from 10.0.0.10 (1318,0x0001) to 138.203.68.61

(try=1): ’reply to ant’ mode.

dnsd:Internet class type A request received from 10.0.0.10.

dnsd:aa.aa.be is outside our domain: forward.

dnsd:forwarding request from 10.0.0.10 (1318,0x0001) to 138.203.68.11

(try=2): ’reply to ant’ mode.

dnsd:forward answer from 138.203.68.11 to 10.0.0.10 (1318,0001).

dnsd:Internet class type A request received from 10.0.0.10.

dnsd:aa.aa.be.lan unknown: return error.

......

=>(CTRL + S)

RELATED COMMANDS:

dns fwdtable

dns fwdlist

dns status

dns troff

Show DNS forwarding table.

Show current DNS forwarding entries..

Show DNS server configuration.

Disable verbose console messaging.

80 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip (to access the IP level)

ip apadd

ip apdelete

ip aplist

ip arpadd

ip arpdelete

ip arplist

ip config

ip flush

ip ifconfig

ip iflist

ip load

ip ping

ip rtadd

ip rtdelete

ip rtlist

ip save

ip sendto

81 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip apadd

Assign an IP address to an interface.

SYNTAX:

ip apadd

addr = <ipĆaddress>

[netmask = <ipĆmask (dotted or cidr)>]

intf = <interface name>

[pointopoint = <ipĆaddress>]

[broadcastip = <ipĆaddress>]

[addrtrans]

[addroute = <{no|yes}>]

[type = <number>]

addr

The new IP address to add.

REQUIRED

OPTIONAL

REQUIRED

OPTIONAL

[netmask]

intf

The subnetmask associated with this address.

Always specify eth0.

[pointopoint]]

[broadcastip]

[addrtrans]

[addroute]

Do not use this parameter.

Do not use this parameter. For internal use only.

Do not use this parameter.

Add typical net/subnet routes automatically according to the default

(or specified) subnet mask (yes) or not (no).

[type]

Do not use this parameter. For internal use only.

OPTIONAL

82 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

EXAMPLE:

=>ip aplist

eth0

inet addr:10.10.10.147

UP RUNNING MTU:1500

IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

Bcast: 10.10.10.255

ReasmMAX:65535 Group:2

ff:ff:ff:ff:ff:ff

Mask:255.0.0.0

IPTX bytes:839550

HWRX bytes:0

HWTX bytes:0

unicastpkts:11477 brcastpkts:0

droppkts:0

unicastpkts:0

brcastpkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

=>ip apadd addr=10.0.0.2 netmask=255.255.255.0 intf=eth0 addroute=yes

=>ip aplist

eth0

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

ff:ff:ff:ff:ff:ff

Mask:255.255.255.0

ReasmMAX:65535 Group:2

inet addr:10.0.0.2

UP RUNNING

Bcast: 10.0.0.255

MTU:1500

unicastpkts:0

IPRX bytes:0

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

eth0

inet addr:10.10.10.147

UP RUNNING MTU:1500

brcastpkts:0

droppkts:0

unicastpkts:0

droppkts:0

ff:ff:ff:ff:ff:ff

Mask:255.0.0.0

ReasmMAX:65535 Group:2

IPRX bytes:19810763 unicastpkts:11515 brcastpkts:290669

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

Bcast: 10.10.10.255

IPTX bytes:853114

HWRX bytes:0

HWTX bytes:0

droppkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

RELATED COMMANDS:

ip apdelete

ip aplist

Remove an IP address from an interface.

Show current IP addresses.

83 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip apdelete

Remove an IP address from an interface.

SYNTAX:

ip apdelete

addr = <ipĆaddress>

addr

The IP address to delete.

REQUIRED

EXAMPLE:

=>ip aplist

eth0

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

ff:ff:ff:ff:ff:ff

inet addr:10.0.0.2

UP RUNNING

IPRX bytes:0

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

Bcast: 10.0.0.255

Mask:255.255.255.0

MTU:1500

unicastpkts:0

ReasmMAX:65535 Group:2

brcastpkts:0

droppkts:0

unicastpkts:0

droppkts:0

ff:ff:ff:ff:ff:ff

Mask:255.0.0.0

ReasmMAX:65535 Group:2

IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555

eth0

inet addr:10.10.10.147

UP RUNNING MTU:1500

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

Bcast: 10.10.10.255

IPTX bytes:839550

HWRX bytes:0

HWTX bytes:0

unicastpkts:11477 brcastpkts:0

droppkts:0

unicastpkts:0

brcastpkts:0

droppkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

=>ip apdelete addr=10.0.0.2

=>ip aplist

eth0

inet addr:10.10.10.147

UP RUNNING MTU:1500

IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

Bcast: 10.10.10.255 Mask:255.0.0.0

ReasmMAX:65535 Group:2

ff:ff:ff:ff:ff:ff

IPTX bytes:839550

HWRX bytes:0

HWTX bytes:0

droppkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

RELATED COMMANDS:

ip apadd

ip aplist

Add an IP address to an interface.

Show current IP addresses.

84 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip aplist

Show a list of all configured IP addresses.

SYNTAX:

ip aplist

EXAMPLE:

=>ip aplist

eth0

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

ff:ff:ff:ff:ff:ff

inet addr:10.0.0.2

UP RUNNING

IPRX bytes:0

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

Bcast: 10.0.0.255

Mask:255.255.255.0

MTU:1500

unicastpkts:0

ReasmMAX:65535 Group:2

brcastpkts:0

droppkts:0

unicastpkts:0

droppkts:0

ff:ff:ff:ff:ff:ff

Mask:255.0.0.0

ReasmMAX:65535 Group:2

IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555

eth0

inet addr:10.10.10.147

UP RUNNING MTU:1500

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

Bcast: 10.10.10.255

IPTX bytes:839550

HWRX bytes:0

HWTX bytes:0

droppkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

RELATED COMMANDS:

ip apadd

Add an IP address to an interface.

ip apdelete

Remove an IP address from an interface.

85 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip arpadd

Add a static entry to the SpeedToucht350i ARP cache.

SYNTAX:

ip arpadd

intf = <interface name>

ip = <ipĆaddress>

[hwaddr = <hardwareĆaddress>]

intf

Always specify eth0.

REQUIRED

OPTIONAL

The IP address.

[hwaddr]

The hardware address (e.g. the Ethernet MAC address).

EXAMPLE:

=>ip arplist

Intf

eth0

IP–address

10.0.0.1

10.0.0.8

10.0.1.99

10.0.1.100

HW–address

00:01:42:5f:7d:81

00:a0:24:ae:66:e1

52:41:53:20:20:4d

52:41:53:20:f0:90

Type

DYNAMIC

STATIC

eth0

=>ip arpadd intf=eth0 ip=10.0.0.2 hwaddr=00:10:a4:d0:9a:db

=>ip arplist

Intf

eth0

IP–address

10.0.0.1

10.0.0.8

10.0.1.99

10.0.1.100

10.0.0.2

HW–address

00:01:42:5f:7d:81

00:a0:24:ae:66:e1

52:41:53:20:20:4d

52:41:53:20:f0:90

00:10:a4:d0:9a:db

Type

DYNAMIC

STATIC

RELATED COMMANDS:

ip arpdelete

ip arplist

Delete an ARP entry.

Show current ARP cache.

86 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip arpdelete

Remove an entry from the SpeedToucht350i ARP cache.

SYNTAX:

ip arpdelete

intf = <interface name>

ip = <ipĆaddress>

[hwaddr = <hardwareĆaddress>]

intf

Always specify eth0.

The IP address.

REQUIRED

OPTIONAL

[hwaddr]

The hardware address.

EXAMPLE:

=>ip arplist

Intf

eth0

IP–address

HW–address

00:01:42:5f:7d:81

00:a0:24:ae:66:e1

52:41:53:20:20:4d

52:41:53:20:f0:90

00:10:a4:d0:9a:db

Type

DYNAMIC

STATIC

10.0.0.1

10.0.0.8

10.0.1.99

10.0.1.100

10.0.0.2

=>ip arpdelete intf=eth0 ip=10.0.0.2 hwaddr=00:10:a4:d0:9a:db

=>ip arplist

Intf

eth0

IP–address

10.0.0.1

10.0.0.8

10.0.1.99

10.0.1.100

10.0.0.2

HW–address

00:01:42:5f:7d:81

00:a0:24:ae:66:e1

52:41:53:20:20:4d

52:41:53:20:f0:90

00:10:a4:d0:9a:db

Type

DYNAMIC

STATIC

RELATED COMMANDS:

Add a static ARP entry.

ip arpadd

ip arplist

Show current ARP cache.

87 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip arplist

Show the SpeedToucht350i ARP cache.

SYNTAX:

ip arplist

EXAMPLE OUTPUT:

=>ip arplist

Intf

eth0

IP–address

10.0.0.1

10.0.0.8

10.0.1.99

10.0.1.100

10.0.0.2

HW–address

00:01:42:5f:7d:81

00:a0:24:ae:66:e1

52:41:53:20:20:4d

52:41:53:20:f0:90

00:10:a4:d0:9a:db

Type

DYNAMIC

STATIC

RELATED COMMANDS:

ip arpadd

Add a static entry to the ARP cache.

Delete an entry from the ARP cache.

ip arpdelete

88 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip config

Show/set global IP stack configuration options. Normally the IP stack configuration should not be

altered.

SYNTAX:

ip config

[forwarding = <{off|on}>]

[firewalling = <{off|on}>]

[redirects = <{off|on}>]

[sourcerouting = <{off|on}>]

[ttl = <number{0-255}>]

[fraglimit = <number{1-1024}>]

[defragmode = <{normal|always|nat}>]

[forwarding]

[firewalling]

Do not use this parameter.

OPTIONAL

Enable (on) or disable (off) IP firewalling (master switch).

For security reasons this parameter is enabled per default.

It is strongly recommended never to disable the SpeedToucht350i

firewall.

[redirects]

[sourcerouting]

[ttl]

Do not use this parameter.

OPTIONAL

[fraglimit]

[defragmode]

89 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip flush

Flush complete IP configuration. Dynamic configurations (e.g. from PPP or CIP links) remain.

The flush command does not impact previously saved configurations.

As an ip flush causes all local IP connectivity to be deleted, do not execute this command during an

IP based local connection, e.g. a Telnet CLI session.

SYNTAX:

ip flush

EXAMPLE:

=>ip aplist

eth0

Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr

ff:ff:ff:ff:ff:ff

Mask:255.255.255.0

ReasmMAX:65535 Group:2

inet addr:10.0.0.2

UP RUNNING

IPRX bytes:0

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

Bcast: 10.0.0.255

MTU:1500

unicastpkts:0

brcastpkts:0

droppkts:0

unicastpkts:0

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

=>ip flush

=>ip aplist

loop

Type:0

inet addr:127.0.0.1

UP RUNNING

Bcast:127.255.255.255 Mask:255.0.0.0

MTU:1500 ReasmMAX:65535 Group:1

IPRX bytes:116

IPTX bytes:0

HWRX bytes:0

HWTX bytes:0

unicastpkts:0

brcastpkts:2

brcastpkts:0

unicastpkts:0

droppkts:0

RELATED COMMANDS:

ip load

ip save

Load saved or default IP configuration.

Save current IP configuration.

90 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip ifconfig

Configure interface parameters.

SYNTAX:

ip ifconfig

intf = <interface name>

[mtu = <number{293-20000}>]

[status = <{down|up}>]

[hwaddr = <hwaddress>]

[group = <number>]

intf

Always specify eth0.

REQUIRED

OPTIONAL

[mtu]

A number between 293 and 20000.

Represents the maximum transmission unit, i.e. the maximum packet

size (including IP header) to use.

[status]

The administrative status of the interface.

Choose between:

OPTIONAL

down

[hwaddr]

[group]

The hardware address (e.g. the Ethernet MAC address).

OPTIONAL

The group this interface belongs to.

Do not use this parameter. For internal use only.

EXAMPLE:

=>ip iflist

Interface

0 loop

1 eth0

=>ip ifconfig intf=eth0 mtu=1500

=>ip iflist

Interface

0 loop

1 eth0

GRP MTU

116

21045795

TX–DROP

STATUS

HWADDR

00:80:9f:24:ab:c

1500

3000

1019664

1025417

GRP MTU

116

21054963

TX–DROP

STATUS

HWADDR

1500

00:80:9f:24:ab:c

RELATED COMMANDS:

ip config

Show/set global IP stack configuration options.

91 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip iflist

Show all current interfaces.

SYNTAX:

ip iflist

EXAMPLE OUTPUT:

=>ip iflist

Interface

0 loop

1 eth0

GRP MTU

116

21045795

TX–DROP

STATUS

HWADDR

00:80:9f:24:ab:c

1500

3000

1019664

RELATED COMMANDS:

ip ifconfig

Configure interface parameters.

92 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip load

Load saved (or default) IP configuration.

Execute ip flush prior to ip load.

SYNTAX:

ip load

[{saved|defaults}]

ip load

Load saved IP configuration.

Load default IP configuration.

ip load saved

ip load defaults

RELATED COMMANDS:

ip flush

ip save

Flush complete IP configuration.

Save current IP configuration.

93 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip ping

Send ICMP ECHO_REQUEST packets.

SYNTAX:

ip ping

addr = <ip-address>

[count = <number{1-1000000}>]

[size = <number{1-20000}>]

[interval = <number{100-1000000}>]

[listen = <{off|on}>]

addr

The destination IP address.

REQUIRED

OPTIONAL

[count]

A number between 1 and 1000000.

Represents the number of pings to send.

[size]

A number between 1 and 20000 (bytes).

Represents the size of the ping packet(s).

OPTIONAL

[interval]

[listen]

A number between 100 and 10000000 (milliseconds).

Represents the intermediate interval between two sent ICMP packets.

Listen for incoming ICMP packets (on) or only send ICMP packets

(off).

EXAMPLE:

=>ip ping addr=10.0.0.148 listen=off

=>ip ping addr=10.0.0.148 listen=on

9 bytes from 10.0.0.148: Echo Request

=>ip ping addr=10.0.0.148 count=15 listen=on

9 bytes from 10.0.0.148: Echo Request

RELATED COMMANDS:

ip sendto

Send UDP packets.

94 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip rtadd

Add a route to the SpeedToucht350i routing table.

SYNTAX:

ip rtadd

dst = <ip-address>

[dstmsk = <ip-mask(dotted or cidr)>]

[src = <ip-address>]

[srcmsk = <ip-mask(dotted or cidr)>]

[gateway = <ip-address>]

[intf = <interface name>]

[metric = <number{0-100}>]

[type = <number>]

dst

The destination IP address(es) for this route.

Supports cidr notation.

REQUIRED

[dstmsk]

[src]

The destination IP address mask.

OPTIONAL

The source IP address(es) allowed to use this route.

Supports cidr notation.

[srcmsk]

The source IP address mask.

OPTIONAL

[gateway]

The IP address of the next hop. Must be directly connected.

The parameters `gateway` and `intf` are mutually exclusive.

[intf]

Do not use this parameter.

OPTIONAL

[metric]

[type]

The metric for this route (currently not used).

Do not use this parameter. For internal use only.

EXAMPLE:

=>ip rtlist

Destination

10.0.0.0/24

10.0.0.140/32

127.0.0.1/32

Source

Gateway

10.0.0.140 eth0

Intf

Mtrc

10.0.0.0/24

0.0.0.0/0

127.0.0.1

loop

=>ip rtadd dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140

=>ip rtlist

Destination

10.0.0.0/24

10.10.0.0/24

10.0.0.140/32

127.0.0.1/32

Source

Gateway

Intf

Mtrc

10.0.0.0/24

0.0.0.0/0

10.0.0.140 eth0

127.0.0.1

loop

RELATED COMMANDS:

ip rtdelete

ip rtlist

Remove a route from the routing table.

Show current routing table.

95 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip rtdelete

Delete a route from the SpeedToucht350i routing table.

SYNTAX:

ip rtdelete

dst = <ip-address>

[dstmsk = <ip-mask(dotted or cidr)>]

[src = <ip-address>]

[srcmsk = <ip-mask(dotted or cidr)>]

[gateway = <ip-address>]

[intf = <interface name>]

dst

The destination IP address(es) of the route.

Supports cidr notation.

REQUIRED

[dstmsk]

[src]

The destination IP address mask.

OPTIONAL

The source IP address(es) of the route.

Supports cidr notation.

[srcmsk]

The source IP address mask.

OPTIONAL

[gateway]

The IP address of the next hop. Must be directly connected.

The parameters `gateway` and `intf` are mutually exclusive.

[intf]

Do not use this parameter.

OPTIONAL

EXAMPLE:

=>ip rtlist

Destination

10.0.0.0/24

10.10.0.0/24

10.0.0.140/32

127.0.0.1/32

Source

Gateway

Intf

Mtrc

10.0.0.0/24

0.0.0.0/0

10.0.0.140 eth0

127.0.0.1

loop

=>ip rtdelete dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140

=>ip rtlist

Destination

10.0.0.0/24

10.0.0.140/32

127.0.0.1/32

Source

Gateway

10.0.0.140 eth0

Intf

Mtrc

10.0.0.0/24

0.0.0.0/0

127.0.0.1

loop

RELATED COMMANDS:

ip rtadd

ip rtlist

Add a route to the routing table.

Show current routing table.

96 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip rtlist

Show current SpeedToucht350i routing table.

SYNTAX:

ip rtlist

EXAMPLE OUTPUT:

=>ip rtlist

Destination

10.0.0.0/24

0.0.0.140/32

127.0.0.1/32

10.0.0.0/24

Source

Gateway

10.0.0.140 eth0

127.0.0.1

10.0.0.140 eth0

Intf

Mtrc

10.0.0.0/24

0.0.0.0/0

loop

RELATED COMMANDS:

ip rtadd

Add a route to the routing table.

ip rtdelete

Remove a route from the routing table.

97 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip save

Save current IP configuration.

SYNTAX:

ip save

RELATED COMMANDS:

ip flush

ip load

Flush complete IP configuration.

Load saved or default IP configuration.

98 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

ip sendto

Send UDP packets.

SYNTAX:

ip sendto

addr = <ip-address>

[count = <number{1-1000000}>]

[size = <number{1-20000}>]

[interval = <number{100-1000000}>]

[listen = <{off|on}>]

[srcport = <number{1-65535}>]

dstport = <number{1-65535}>

addr

The destination IP address.

REQUIRED

OPTIONAL

[count]

A number between 1 and 1000000.

Represents the number of UDP packets to send.

[size]

A number between 1 and 20000 (bytes).

Represents the size of the ping packet(s).

OPTIONAL

[interval]

A number between 100 and 10000000 (milliseconds).

Represents the intermediate interval between two sent UDP packets.

[listen]

Listen for incoming UDP packets (on) or only send UDP packets (off). OPTIONAL

[srcport]

dstport

The UDP source port number to use.

OPTIONAL

REQUIRED

The UDP destination port number to send to.

EXAMPLE:

=>ip sendto addr=10.0.0.148 listen=on srcport=19 dstport=1025

1 bytes from 10.0.0.148:1025

=>ip sendto addr=10.0.0.148 count=3 listen=on srcport=19 dstport=1025

1 bytes from 10.0.0.148:1025

RELATED COMMANDS:

ip ping

Send ICMP ECHO_REQUEST packets.

99 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

5 IP Commands

100 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook (to access the Phonebook level)

phonebook add

phonebook autolist

phonebook delete

phonebook flush

phonebook list

phonebook load

phonebook save

101 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook add

Add a phonebook entry.

The number of entries is limited to 64. The number of active connections is limited to 12, but more

may be configured at the same time.

SYNTAX:

phonebook add

name = <string>

addr = <vp*vc>

type = <{bridge|pptp}>

name

A free to choose phonebook name for the destination.

Two limitations apply:

REQUIRED

The name of a phonebook entry intended for the Relayed

PPPoA (PPPoAĆtoĆPPTP Relaying) packet service may not start

with capital P or capital T

addr

The ATM address for this destination.

It is composed of a Virtual Path Identifier (VPI) and a Virtual Channel

Identifier (VCI) identifying ATM virtual channels.

In most cases the values are provided by the Service Provider.

Accepted VPI: a number between 0 and 15

Accepted VCI: a number between 0 and 511.

type

The Connection Service supported by the destination.

Choose between:

REQUIRED

bridge (Bridging, Bridged PPPoE)

pptp (Relayed PPPoA, PPPoAĆtoĆPPTP Relaying).

EXAMPLE:

=>phonebook list

Name

Br1

address

8*35

type

bridge

pptp

usage

configured

RELAY_PPP1 8*48

=>phonebook add name=Alcatel addr=8.68 type=pptp

=>phonebook list

Name

address

type

usage

Br1

8*35

bridge

pptp

configured

free

RELAY_PPP1 8*48

Alcatel

8*68

RELATED COMMANDS:

phonebook delete

phonebook list

Remove a phonebook entry.

Show current phonebook.

102 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook autolist

Show auto PVCs, if supported by the Central Office DSLAM. (Only applicable for Alcatel ASAM

DSLAMs).

SYNTAX:

phonebook autolist

EXAMPLE INPUT/OUTPUT:

=>phonebook autolist

8.35

RELATED COMMANDS:

phonebook list

Show current phonebook.

103 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook delete

Remove an unused phonebook entry.

SYNTAX:

phonebook delete

name = <string>

name

the name of the phonebook entry to delete.

REQUIRED

Only applicable for phonebook entries that are not used, i.e. not

configured for any packet service.

Execute phonebook list to check whether the entry is used or not.

EXAMPLE:

=>phonebook list

Name

Br1

address

8*35

type

bridge

pptp

usage

configured

free

RELAY_PPP1 8*48

Alcatel 8*68

pptp

=>phonebook delete name=Alcatel

=>phonebook list

Name

address

type

usage

Br1

8*35

bridge

pptp

configured

RELAY_PPP1 8*48

RELATED COMMANDS:

phonebook add

phonebook list

Add a phonebook entry.

Show current phonebook.

104 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook flush

Flush complete phonebook.

The flush command does not impact previously saved configurations.

SYNTAX:

phonebook flush

EXAMPLE:

=>phonebook list

Name

Br1

Br2

Br3

Br4

address

8*35

8*36

8*37

type

usage

configured

free

configured

bridge

pptp

8*38

RELAY_PPP1 8*48

RELAY_PPP2 8*49

RELAY_PPP3 8*50

RELAY_PPP4 8*51

=>phonebook flush

=>phonebook list

Name

address

type

usage

RELATED COMMANDS:

phonebook load

phonebook save

Load saved or default phonebook.

Save current phonebook.

105 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook list

Show current phonebook.

SYNTAX:

phonebook list

[opt = <{long}>]

Do not use this parameter. For internal use only.

[opt]

OPTIONAL

EXAMPLE INPUT/OUTPUT:

=>phonebook list

Name

Br1

Br2

Br3

Br4

address

8*35

8*36

8*37

type

usage

configured

free

configured

bridge

pptp

8*38

RELAY_PPP1 8*48

RELAY_PPP2 8*49

RELAY_PPP3 8*50

RELAY_PPP4 8*51

RELATED COMMANDS:

phonebook add

Add a phonebook entry.

Show auto PVCs.

phonebook autolist

phonebook delete

Remove a phonebook entry.

106 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook load

Load saved (or default) phonebook.

Execute phonebook flush prior to phonebook load.

SYNTAX:

phonebook load

[{saved|defaults}]

phonebook load

Load saved phonebook configuration.

phonebook load saved

phonebook load defaults Load default phonebook configuration.

RELATED COMMANDS:

phonebook flush

phonebook save

Flush complete phonebook.

Save current phonebook.

107 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Phonebook Commands

phonebook save

Save current phonebook.

SYNTAX:

phonebook save

RELATED COMMANDS:

phonebook flush

phonebook load

Flush complete phonebook.

Load saved or default phonebook.

108 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp (to access the PPTP level)

pptp flush

pptp ifadd

pptp ifconfig

pptp ifdelete

pptp iflist

pptp load

pptp save

109 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp flush

Flush complete PPTP configuration.

The flush command does not impact previously saved configurations.

SYNTAX:

pptp flush

EXAMPLE:

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

Test

6000K nlpid keep

DEFINED

=>pptp flush

=>pptp iflist

RELATED COMMANDS:

pptp load

pptp save

Load saved or default PPTP configuration.

Save current PPTP configuration.

110 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp ifadd

Add a PPTP interface.

SYNTAX:

pptp ifadd

dest = <vp*vc|name>

[rate = <number{10-10000}>]

[encaps = <{vcmux|nlpid}>]

[ac <{never|always|keep}>]

dest

The destination for the relayed PPTP tunnel.

Typically a phonebook name.

REQUIRED

OPTIONAL

[rate]

A number between 10 and 10000 (Kilobits per second).

Indicates the (maximum) transmission speed on the WAN link.

[encaps]

The type of encapsulation to be used for the relayed PPPoA interface. OPTIONAL

Choose between:

vcmux (default)

nlpid

[ac]

Before relaying the encapsulated PPP frames over the PPPoA link,

make sure that the address and control field (0xFF03) is always in

front of the frames (always), make sure the address and control field

will never be found in front of the frames (never) or do not change

the frames arriving via the PPTP tunnel (keep).

OPTIONAL

By default the address and control field is never sent (compliant to

RFC2364). It is recommended to keep this setting.

EXAMPLE:

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

=>pptp ifadd dest=Test rate=6000 encaps=nlpid ac=keep

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

Test

6000K nlpid keep

DEFINED

RELATED COMMANDS:

pptp ifconfig

pptp ifdelete

pptp iflist

Configure an existing PPTP interface.

Delete a PPTP interface.

Show current PPTP interfaces.

111 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp ifconfig

Configure an existing PPTP interface.

SYNTAX:

pptp ifconfig

intf = <vp*vc|name>

[rate = <number{10-10000}>]

[encaps = <{vcmux|nlpid}>]

[ac <{never|always|keep}>]

intf

The PPTP interface to configure

Typically a phonebook name.

REQUIRED

OPTIONAL

[rate]

[encaps]

A number between 10 and 10000 (Kilobits per second).

Indicates the (maximum) transmission speed on the WAN link.

The type of encapsulation to be used for the relayed PPPoA interface. OPTIONAL

Choose between:

vcmux (default)

nlpid

[ac]

Before relaying the encapsulated PPP frames over the PPPoA link,

make sure that the address and control field (0xFF03) is always in

front of the frames (always), make sure the address and control field

will never be found in front of the frames (never) or do not change

the frames arriving via the PPTP tunnel (keep).

OPTIONAL

By default the address and control field is never sent (compliant to

RFC2364). It is recommended to keep this setting.

EXAMPLE:

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

Test

6000K nlpid keep

DEFINED

=>pptp ifconfig intf=Test rate=2ooK encaps=vcmux ac=always

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

vcmux always DEFINED

Test

200K

RELATED COMMANDS:

pptp ifadd

pptp ifdelete

pptp iflist

Add a PPTP interface.

Delete a PPTP interface.

Show current PPTP interfaces.

112 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp ifdelete

Delete a PPTP interface.

SYNTAX:

pptp ifdelete

intf = <vp*vc|name>

intf

The name od the PPTP interface to delete.

Typically a phonebook name.

REQUIRED

EXAMPLE:

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

Test

6000K nlpid keep

DEFINED

=>pptp ifdelete intf=Test

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

RELATED COMMANDS:

pptp ifadd

pptp ifconfig

pptp iflist

Add a PPTP interface.

Configure an existing PPTP interface.

Show current PPTP interfaces.

113 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp iflist

Show current PPTP configuration.

SYNTAX:

pptp list

EXAMPLE INPUT/OUTPUT:

=>pptp iflist

C:#

Name

Rate

Encap AC

Usage [by]

RELAY_PPP18

RELAY_PPP28

RELAY_PPP38

RELAY_PPP48

vcmux never DEFINED

Test

6000K nlpid keep

DEFINED

RELATED COMMANDS:

pptp ifadd

Add a PPTP interface.

pptp ifconfig

pptp ifdelete

Configure an existing PPTP interface.

Delete a PPTP interface.

114 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp load

Load saved (or default) PPTP configuration.

Execute pptp flush prior to pptp load.

SYNTAX:

pptp load

[{saved|defaults}]

pptp load

Load saved PPTP configuration.

Load default PPTP configuration.

pptp load saved

pptp load defaults

RELATED COMMANDS:

pptp flush

pptp save

Flush complete PPTP configuration.

Save current PPTP configuration.

115 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

7 PPTP Commands

pptp save

Save current PPTP configuration.

SYNTAX:

pptp save

RELATED COMMANDS:

pptp flush

pptp load

Flush complete PPTP configuration.

Load saved or default PPTP configuration.

116 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software (to access the Software level)

software cleanup

software deletepassive

software setpassive

software switch

software version

117 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software cleanup

Remove all unused files from the passive software subdirectory.

This command frees the passive software subdirectory from corrupted software files and

configuration files. Software marked as passive software is not deleted.

SYNTAX:

software cleanup

EXAMPLE:

=>software cleanup

RELATED COMMANDS:

software deletepassive

software setpassive

Delete the passive software.

Mark an uploaded file as passive software version.

118 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software deletepassive

Delete passive software.

SYNTAX:

software deletepassive

EXAMPLE:

=>Softwareversion

Active : Sascha3.254

=>Softwaredeletepassive

=>Softwareversion

Active : Sascha3.254

Passive : Bene3.228

Passive :

RELATED COMMANDS:

software cleanup

Remove all unused files from the passive software subdirectory.

Mark a file as passive software version.

software setpassive

119 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software setpassive

Mark a file as passive software version. Only correctly uploaded software, valid for the

SpeedToucht350i can be marked as passive software.

SYNTAX:

software setpassive file = <string>

file

the filename (without directory path) of the software package.

REQUIRED

EXAMPLE:

=>Softwareversion

Active : Sascha3.254

=>Softwaredeletepassive

=>Softwareversion

Active : Sascha3.254

.....

Passive : Bene3.228

Passive :

(FTP file transfer or upload via the SpeedToucht350i pages of new software Sascha3.280)

.....

=>softwaresetpassivefile=Sascha3.280

=>Softwareversion

Active : Sascha3.254

Passive : Sascha3.280

RELATED COMMANDS:

software cleanup

Remove all unused files from the passive software subdirectory.

Delete passive software.

software deletepassive

120 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software switch

Switch active and passive versions and reboot the SpeedToucht350i.

Because rebooting implies a flush of all nonĆsaved configurations it is highly recommended to save

the current configuration if needed, e.g. by executing the config save command prior to executing

a software switch.

SYNTAX:

software switch

EXAMPLE:

=>Softwareversion

Active : Sascha3.254

=>softwareswitch

.....

Passive : Sascha3.280

(after reboot and re-opening the Telnet session)

.....

=>Softwareversion

Active : Sascha3.280

Passive : Sascha3.254

RELATED COMMANDS:

software version

system reboot

Show active and passive software versions.

Reboot the SpeedToucht350i.

121 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Software Commands

software version

Show active and passive software versions.

SYNTAX:

software version

EXAMPLE:

=>Softwareversion

Active : Sascha3.280

Passive : Sascha3.254

RELATED COMMANDS:

software switch

Switch active and passive software versions and reboot the

SpeedToucht350i.

122 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system (to access the System level)

system clearpassword

system flush

system load

system reboot

system save

system setpassword

123 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system clearpassword

Clear current SpeedToucht350i system password.

To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended

always to make sure that it is protected by a SpeedToucht350i system password (by executing

system setpassword) and to change the password regularly.

SYNTAX:

system clearpassword

EXAMPLE:

=>system clearpassword

RELATED COMMANDS:

system setpassword

Set/change current system password.

124 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system flush

Flush current SpeedToucht350i system configuration, i.e. the System password.

The flush command does not impact previously saved configurations.

To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended

always to make sure that it is protected by a SpeedToucht350i system password (by executing

system setpassword) and to change the password regularly.

SYNTAX:

system flush

EXAMPLE:

=>system flush

RELATED COMMANDS:

system load

system save

Load saved or default system configuration.

Save current system configuration.

125 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system load

Load saved (or default) system configuration.

Execute system flush prior to system load.

In most cases loading the default system configuration causes the SpeedToucht350i system

password to be CLEARED.

Therefore, to avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly

recommended always to make sure that it is protected by a SpeedToucht350i system password

(by executing system setpassword) and to change the password regularly.

SYNTAX:

system load

[{saved|defaults}]

system load

Load saved system configuration.

Load default system configuration.

system load saved

system load defaults

RELATED COMMANDS:

system flush

system save

Flush complete system configuration.

Save current system configuration.

126 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system reboot

Reboot the SpeedToucht350i.

Because rebooting implies a flush of all nonĆsaved configurations it is highly recommended to save

the current configuration by executing config save.

To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended

always to make sure that it is protected by a SpeedToucht350i system password (by executing

system setpassword) and to save it (by executing system save) prior to executing this command.

SYNTAX:

system reboot

EXAMPLE:

=>system reboot

.....

(lost session connectivity due to reboot)

.....

127 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system save

Save current system configuration, i.e. the System password.

To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended

always to make sure that it is protected by a SpeedToucht350i system password (by executing

system setpassword) and to save it (by executing system save) prior to executing this command.

SYNTAX:

system save

EXAMPLE:

=>system save

RELATED COMMANDS:

system load

system flush

Load saved or default system configuration.

Flush complete system configuration.

128 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

system setpassword

Set/change the current SpeedToucht350i system password.

Because rebooting implies a flush of all nonĆsaved configurations it is highly recommended to save

the current configuration via the system save command.

To avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly recommended

always to make sure that it is protected by a SpeedToucht350i system password and to change it

regularly.

SYNTAX:

system setpassword password = {<string>|$_BOARD_SERIAL_NBR}

password

the system password can be set to either:

REQUIRED

A free to choose password <string>

$_BOARD_SERIAL_NBR

Equal to the SpeedToucht350i device serial number's nine

numerical digits.

IMPORTANT NOTE:

Serial number

The code serial number is printed on the marking label found on

the bottom of the SpeedToucht350i:

Q A

MODEL NUMBER:

CP992300XXX

Speed Touch Home NT Tested to Comply with

FCC rules Part 15 and Part 68

3EC 18204BC AA01

FOR HOME OR OFFICE USE

FCC ID: 6VUBEL–35680–DL–N

PART OF A SYSTEM THAT IS COVERED IN WHOLE OR IN

LISTED

PART BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS:

REN:<0.1

Made in: Country

5,636,253.5,633,817.5,657,355.5,903,612.5,867,528

I . T . E . E168438 5,951,660.6,044,151.6,072,810.6,088,386.6,105,084

Q A

MODEL NUMBER:

CPYYWWNNNNN

3EC 18704BC

AA01

Speed Touch Home POTS Network Terminator

It consists of the concatenation of the string 'CP' followed by nine

digits. These nine digits incorporate the serial number.

In case the System password is set to the serial number, for

authentication the serial number must be given without the

preceding string 'CP' .

DO NOT REMOVE OR COVER THIS MARKING LABEL !!!

129 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

9 System Commands

EXAMPLE 1:

=>system setpassword password=Sascha

EXAMPLE 2:

=>system setpassword password=$_BOARD_SERIAL_NBR

=>system save

.....

After reboot a telnet session is opened to the SpeedToucht350i with the following

serial number: 013214578 (remind to strip of the string ’CP’)

/home/doejohn{1}$ telnet 10.0.0.138

Trying 10.0.0.138...

Connected to 10.0.0.138.

Escape character is ’^]’.

User :

SpeedTouch (00–90–D0–00–01–23–45)

Password : 013214578

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

______

___/_____/\

/\\

Alcatel Speed Touch(TM)350i

ADSL Modem for ISDN

Version R3.2

_____/__

_/ /\_____/___ \

_______//_______/

/ \\

/ \

/\ \

/ \

\ /

/ /

/ _\__

/ / /\

* __/

* / /

\_______\/

* /_/______/___________________/ /________/ /___/ \

* \ \

* \_\

___________

/ \

\ \

\ \ \ /

\ \___\/

\ /

\_____/

/__________/

\ _____ \

\ / /\ \

/____/ \ \ /

\ /___\/

\____\/

\ \________\/

\ /

/_____\/

/___\/

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

RELATED COMMANDS:

system clearpassword

Clear current system password.

130 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

10 TD Commands

td (to access this level)

td call

td prompt

131 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

10 TD Commands

td call

Call a `Trace & Debug` command. For qualified personnel only.

SYNTAX:

td call

cmd = <string>

cmd

The quoted trace & debug command string.

REQUIRED

132 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

10 TD Commands

td prompt

Switch to AlcatelĆowned `Trace & Debug` prompt (expert mode). For qualified personnel only.

SYNTAX:

td prompt

Before entering the expert mode a DISCLAIMER is shown stipulating that the `Trace & Debug`

prompt (expert mode) is intended for qualified personnel only.

Pressing ENTER allows to return to user mode.

The `Trace & Debug` prompt (expert mode) password is intended to be used by qualified personnel

only.

The `Trace & Debug` prompt (expert mode) password is not intended to protect the

SpeedToucht350i from unrestricted and unauthorized access.

Therefore, to avoid unrestricted and unauthorized access to the SpeedToucht350i it is highly

recommended always to make sure that it is protected by a SpeedToucht350i system password

and to change it regularly. See the system setpassword command for more information.

133 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

10 TD Commands

134 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Alcatel

SpeedTouch 350i

CLI Command Index

135 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

136 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

add

dhcp add, 40

erase, config erase, 34

dns add, 60

phonebook add, 102

apadd, ip apadd, 82

flush

bridge flush, 23

config flush, 35

dhcp flush, 46

dns flush, 65

apdelete, ip apdelete, 84

aplist, ip aplist, 85

arpadd, ip arpadd, 86

arpdelete, ip arpdelete, 87

arplist, ip arplist, 88

ip flush, 90

phonebook flush, 105

pptp flush, 110

system flush, 125

autolist, phonebook autolist, 103

fwdadd, dns fwdadd, 66

fwddelete, dns fwddelete, 67

fwdlist, dns fwdlist, 68

call, td call, 132

fwdtable, dns fwdtable, 69

cleanup, software cleanup, 118

clear, dns clear, 61

clearpassword, system clearpassword, 124

client, dhcp client, 41

help, 11

clrstats

dhcp clrstats, 42

dns clrstats, 62

ifadd, pptp ifadd, 111

config

bridge config, 22

dhcp config, 43

ip config, 89

ifconfig

ip ifconfig, 91

pptp ifconfig, 112

ifdelete, pptp ifdelete, 113

iflist

ip iflist, 92

pptp iflist, 114

delete

dhcp delete, 45

dns delete, 63

phonebook delete, 104

deletepassive, software deletepassive, 119

domain, dns domain, 64

list

dhcp list, 47

dns list, 70

phonebook list, 106

137 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

load

bridge load, 24

config load, 36

dhcp load, 48

dns load, 71

save

bridge save, 32

config save, 38

dhcp save, 50

dns save, 73

ip load, 93

phonebook load, 107

pptp load, 115

system load, 126

ip save, 98

phonebook save, 108

pptp save, 116

system save, 128

sendto, ip sendto, 99

macadd, bridge macadd, 25

macdelete, bridge macdelete, 26

maclist, bridge maclist, 27

setpassive, software setpassive, 120

setpassword, system setpassword, 129

spoof, dhcp spoof, 51

start

dhcp start, 52

dns start, 74

nslookup, dns nslookup, 72

stats

dhcp stats, 53

dns stats, 75

status

ping, ip ping, 94

dhcp status, 55

dns status, 76

policy, dhcp policy, 49

stop

portadd, bridge portadd, 28

portconfig, bridge portconfig, 29

portdelete, bridge portdelete, 30

portlist, bridge portlist, 31

prompt, td prompt, 133

dhcp stop, 56

dns stop, 77

switch, software switch, 121

toutfwd, dns toutfwd, 78

troff

reboot, system reboot, 127

reset, config reset, 37

rtadd, ip rtadd, 95

dhcp troff, 57

dns troff, 79

tron

dhcp tron, 58

dns tron, 80

rtdelete, ip rtdelete, 96

rtlist, ip rtlist, 97

version, software version, 122

138 / 138

3EC 16982 AGAA TCZZA Ed. 01

Download from Www.Somanuals.com. All Manuals Search And Download.

3G Green Green Globe Refrigerator ZTS Series User Manual
ACTiSYS Network Card ACT IR100S User Manual
Addonics Technologies Computer Hardware CRT535PES User Manual
Air King Ventilation Hood AK927 User Manual
Allied Telesis Switch AT 8POE User Manual
Altec Lansing Portable Speaker SR4021 User Manual
Altec Lansing Speaker VS2320 User Manual
Axis Communications Security Camera AXIS 209FD User Manual
Ayre Acoustics Stereo Amplifier K 5xe User Manual
Aztech Systems Network Card WL230USB User Manual