Introduction
The.AdderView.CATxIP.1000.is.available.in.two.sizes,.
supporting.eight.or.sixteen.computers.respectively..
These.numbers.can.be.increased.at.any.time.thanks.to.
the.ability.to.connect.AdderView.CATx.1000.units.in.
In.addition.to.the.local.user.console,.the.AdderView.
CATxIP.1000.units.provide.true.global.control.for.the.
multiple.host.systems..Up.to.four.global.users.can.share.
access.to.a.computer.from.anywhere.via.an.IP.network/
Thank.you.for.choosing.the.AdderView.CATxIP.1000.
from.Adder.Technology..This.compact.unit.has.been.
created.to.allow.a.single.operator.to.take.full.control.of.
many.computer.systems..
cascade.to.provide.a.much.larger.network.of.controlled. internet.connection.using.a.Real.VNC.client.application..
Like.the.other.models.within.the.highly.successful.
computers..Both.models.provide.full.enterprise.level.
security.to.restrict.access.to.authorised.personnel...
Each.AdderView.CATxIP.1000.is.even.able.to.provide.
the.VNC.application.to.each.global.user,.either.as.a.
standalone.application.or.as.a.Java.applet.within.a.
standard.internet.browser..
AdderView.CATx.family,.this.unit.takes.full.advantage.of.
category.5,.5e.or.6.structured.cabling.to.provide.flexible.
installation.and.configuration..Every.connected.computer.
is.linked.by.up.to.ten.metres.of.standard.CATx.cable.and.
one.of.five.types.of.CAM.(Computer.Access.Module).
according.to.the.port.arrangements.on.each.computer..
Optional.power.switch.control.allows.you.to.remotely.
perform.a.hard.reset.on.any.host.system,.no.matter.
how.badly.it.has.locked.up..
Local user
Optional power control
You.have.the.opportunity.to.
attach.one.or.more.power.
switches..These.control.the.
supply.to.the.system(s).and.
allow.a.remote.user.to.hard.
reset.any.system.that.has.
suffered.a.failure..
Global users
The.IP.models.can.support.up.to.
four.global.users.at.any.one.time..
One.user.can.
be.connected.
directly.to.the.
AdderView.
CATxIP.1000......
IP network/Internet
The.IP.port.allows.direct.
connection.to.an.Ethernet-based.
local.network.and.from.there.
onto.the.wider.Internet.
IP network/
Internet
LOC REM VNC 100 LNK PWR
Alternatively,.the.robust.
AdderView.CATxIP.1000.
Power switch
security.system.will.allow.direct.
connection.to.the.outside.world...
CAM
CAM
CAM
CAM
CAM
CAM
Many computers
AdderView.CATxIP.1000.units.can.directly.support.either.8.or.16.
computer.systems..Multiple.AdderView.CATx.1000.units.can.also.
be.cascaded.onto.the.original.unit.to.support.a.maximum.of.256.
computers...
Represents.Video,.
USB.keyboard.and.
mouse.connections
CAM formats
The.CAMs.are.available.in.
different.formats.to.support.all.
common.types.of.systems,.which.
can.easily.be.mixed.within.a.
multi-format.configuration..
Each.system.is.linked.using.a.Computer.Access.Module.(CAM).
and.category.5,.5e.or.6.cabling.to.a.maximum.distance.of.10m..
(32.ft).from.the.AdderView.CATxIP.1000.unit...
Represents.Video,.
PS/2.keyboard.and.
mouse.connections
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
AdderView CATxIP 1000 features - front and rear
The.AdderView.CATxIP.1000.units.pack.a.great.deal.of.functionality.into.a.compact.
space..Both.models.occupy.half.of.a.single.1U.rack.space.and.provide.most.of.their.
connectors.at.the.rear.face..The.smart.front.face.features.the.remote.user.link.port.
and.the.operation.indicators.
LOC REM VNC 100 LNK PWR
IP network port
The.port.by.which.global.users.are.linked.to.the.
AdderView.CATxIP.1000.unit..This.intelligent.
Ethernet.port.can.automatically.sense.whether.
it.is.attached.to.a.10Mb.or.100Mb.network..
Indicators
These.six.indicators.clearly.show.the.key.aspects.of.operation:
•.LOC.Keyboard.or.mouse.data.are.being.received.from.the.local.console.
•.REM.Keyboard.or.mouse.data.are.being.received.from.the.remote.console.
•.VNC.Indicates.that.a.global.user.is.connected.and.active.
•.ꢀ00.Indicates.the.Ethernet.network.speed.(10/100Mbs).
•.LNK.Indicates.that.a.network.link.is.present.
Options port
•.PWR.Indicates.that.power.is.present.
This.RS232.serial.port.can.separately.support.the.following.functions:
•.Power.switching.-.can.be.configured.to.control.multiple.power.switching.devices.
•.Remote.control.switching.-.commands.can.be.received.that.will.change.the.
channel,.as.necessary.
•.Synchronisation.-.allows.the.actions.of.two.or.more.AdderView.CATxIP.1000.
switches.to.be.synchronised.so.that.multiple.computers/video.screens.can.be.
switched.and.accessed.
16
15
11
14
13
8
7
6
5
OPTIONS
Power input
The.power.supply.
5V
2.0A
12
10
9
4
3
2
COMPUTER CONNECTIONS
1
COMPUTER CONNECTIONS
connects.here.
Computer ports
Local user port
Each.computer.connects.to.one.of.these.ports.
via.standard.category.5,.5e.or.6.cabling..At.the.
other.end.of.the.cabling.a.CAM.(Computer.Access.
Module).is.used.to.provide.the.necessary.keyboard,.
video.and.mouse.connections..
Connect.a.USB.keyboard.and.mouse,.plus.a.video.
monitor.to.these.connectors..These.allow.you.to.
perform.the.initial.configuration.of.the.AdderView.
CATxIP.1000..Additionally,.you.can.use.these.to.locally.
control.the.connected.computer(s)..
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the box
AdderView CATxIP ꢀ000
AVX1008IP.–.8.computer.connections,.1.local.console.connection,.1.global.user.(network).connection
AVX1016IP.–.16.computer.connections,.1.local.console.connection,.1.global.user.(network).connection
Power adapter
and country-
specific power
lead
L
O
C
R
E
M
V
N
C
1
0
0
L
N
K
P
W
R
w
w
w
.
a
d
d
e
r
.
c
o
m
Four self-adhesive
rubber feet
CD-ROM
What you may additionally need
Computer Access Modules
One.required.per.connected.computer..There.are.five.
different.formats,.depending.on.the.required.computer.
connections:
Single unit rack brackets
Includes.four.screws
Part.number:.RMK-ALIP.
PS/ꢁ-style
Connectors:Analog video, PS/2-style keyboard and
PS/2-style mouse.
Part.number:.CATX-PS2
Double unit rack brackets
Includes.twelve.screws
Part.number:.RMK-ALIP-DUAL
Serial options cable
Part.number:..
CAB-9M/9F-2M
PS/ꢁ-style with audio
Connectors:Analog video, PS/2-style keyboard, PS/2-
style mouse and 3.5mm audio jack.
Part.number:.CATX-PS2A
USB
Connectors:Analog video and USB keyboard/mouse.
Part.number:.CATX-USB
Slave power switches for connection
to AdderView CATxIP ꢀ000 or master
power switch
Part.number:.EPS-S8.(not.available.in.
North.America)
USB with audio
Connectors:Analog video, USB keyboard/mouse and
3.5mm audio jack.
Part.number:.CATX-USBA
Sun with audio
Connectors:Analog video, Sun keyboard/mouse and
3.5mm audio jack.
Part.number:.CATX-SUNA
Master power switch for connection
to AdderView CATxIP ꢀ000 or
standalone Ethernet operation
Part.number:.EPS-M8.(not.available.in.
North.America)
.
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Mounting
The.AdderView.CATxIP.1000.units.offer.three.main.mounting.methods:
•. Supplied.four.self-adhesive.rubber.feet
•. Optional.single.unit.rack.brackets
Single unit rack brackets
These.two.brackets.(plus.four.screws),.extend.the.
size.of.the.AdderView.CATxIP.1000.so.that.it.
fills.the.full.width.of.a.1U.rack.slot..
•. Optional.double.unit.rack.brackets
OPTIONS
5V
2.0A
16
15
14
13
8
7
6
5
1
2
COMPUTER
1
1
CONNECTIONS
1
0
9
Y
4
COMPUTER
O
3
U
CONNECTION
2
1
S
I
OPTIONS
5
2
V
.0
16
A
15
14
13
8
1
2
7
COMPUTER
1
1
6
CONNECTIONS
1
0
5
9
Y
4
Double unit rack brackets
COMPUTER
3
O
U
CONNECTIONS
2
This.kit.comprises.four.brackets.(plus.twelve.
screws).and.allows.two.AdderView.CATxIP.
1000.units.to.be.connected.side.by.
1
I
side.and.fitted.into.a.1U.rack.slot..
OPTIONS
6
5V
2.0A
5
16
15
Y
14
O
13
U
2
ECTIONS
8
1
2
1
7
6
5
I
COMPUTER
1
1
OPTIONS
CONNECTIONS
1
0
9
5
2.0A
V
16
Y
4
COMPUTER
15
O
3
U
14
CONNECTION
2
13
1
S
I
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
The.AdderView.CATxIP.1000.provides.a.great.deal.of.flexibility.in.its.configurations..This.chapter.
details.the.various.connections.that.can.be.made.to.achieve.the.required.installation.
LOCAL OCAL
USER USER
page 9
page 10
USER
GLOBAL
USER
IP
CAM CAM
IN
HOST
COMPUTER
page 12
page 17
CAM
COMPUTER
SYSTEM
POWER
X200
page 14
page 11
page 13
CAM
Connections.do.not.need.to.be.carried.out.in.the.order.given.within.this.guide,.
however,.where.possible.connect.the.power in.as.a.final.step.
REMOTE
CONTROL
page 18
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Local user
LOCAL
USER
GLOBAL
To connect the local user port
A.locally.connected.video.monitor,.keyboard.
1. Position.a.suitable.video.monitor,.keyboard.and.mouse.in.the.vicinity.of.the.
AdderView.CATxIP.1000.unit.such.that.their.cables.will.easily.reach.
(and.mouse).are.required.during.the.initial.
configuration..These.are.also.useful.during.
normal.use.to.allow.quick.local.control.of.any.
connected.computer.systems..The.AdderView.
CATxIP.1000.unit.directly.supports.USB.style.
keyboards.and.mice....
IP
IN
2. Attach.the.video.monitor,.keyboard.and.mouse.connectors.to.the.sockets,.
collectively.labelled.as.USER CONSOLE,.at.the.rear.of.the.AdderView.CATxIP.
1000.unit..
CAM
COMPUTER
SYSTEM
SWITCH
AdderView CATxIP ꢀ000
rear panel
O
P
T
IO
N
S
5
2
V
.
0
1
A
6
1
1
2
C
O
1
P
From video monitor
From USB keyboard and mouse
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Global user (IP network port)
To connect the Global user (IP network) port
The.AdderView.CATxIP.1000.models.provide.
an.autosensing.Ethernet.IP.port.that.can.
operate.at.10.or.100Mbps,.according.to.the.
network.speed..The.AdderView.CATxIP.1000.
models.are.designed.to.reside.quite.easily.at.
any.part.of.your.network:.
USER
GLOBAL
USER
1. Depending.upon.where.in.the.network.the.AdderView.CATxIP.1000.is.being.
connected,.run.a.category.5,.5e.or.6.link.cable.from.the.appropriate.hub.or.
router.to.the.AdderView.CATxIP.1000.unit.
IP
IN
2. Connect.the.plug.of.the.link.cable.into.the.IP.port.on.the.front.panel.of.the.
AdderView.CATxIP.1000.unit.
CAM
•. They.can.be.placed.within.the.local.
network,.behind.any.firewall/router.
connections.to.the.Internet,.or
COMPUTER
SYSTEM
SWITCH
AdderView CATxIP
ꢀ000 front panel
•. They.can.be.placed.externally.to.the.local.
network,.on.a.separate.sub-network.or.with.an.open.Internet.connection....
Wherever.in.the.network.an.AdderView.CATxIP.1000.is.situated,.you.will.need.
to.determine.certain.configuration.issues.such.as.address.allocation.and/or.
IMPORTANT: When an AdderView CATxIP 1000 is accessible from the public
Internet or dial up connection, you must ensure that sufficient security measures
are employed.
Category ꢄ, ꢄe or ꢅ cable
from Adder Xꢀ00/Xꢁ00
module
3. Configure.the.network.settings.as.appropriate.to.the.position.of.the.
details.....
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer system (via CAM)
USER
GLOBAL
USER
4. Attach.the.connector.of.the.cable.
Each.computer.system.is.connected.to.the.
AdderView.CATxIP.1000.unit.via.a.Computer.
Access.Module.(CAM).and.standard.category.5,.
5e.or.6.cabling..CAMs.are.available.in.various.
formats.to.suit.differing.computer.system.types.
and.their.particular.connector.styles.
run.to.the.socket.of.the.CAM.
IP
IN
Green indicator - power present
Yellow indicator - signal activity
CAM
Each.CAM.uses.Adder.Keep.Alive.technology.
to.ensure.that.the.keyboard.and.mouse.inputs.
to.the.computer.remain.active,.even.when.
the.particular.channel.is.not.selected..This.action.ensures.that.there.are.no.
connection.delays.or.problems.as.the.port.is.selected...
COMPUTER
SYSTEM
POWER
Computer
Access
Module
To connect a computer system
1. Ensure.that.power.is.disconnected.from.the.AdderView.CATxIP.1000.unit.
and.the.system.to.be.connected..
Note: CAMs derive power from the
computer system via either the PS/2-style
keyboard connector, USB or SUN connector.
Category ꢄ, ꢄe or ꢅ
cable to AdderView
CATxIP ꢀ000
2. Locate.the.required.CAM.(there.are.five.types.available).and.attach.its.video,.
keyboard.and.mouse.(PS/2-style,.USB.or.Sun).to.the.relevant.sockets.on.the.
computer.system..
5. At.the.other.end.of.the.cable.run,.attach.the.cable.connector.to.one.of.the.
sockets.labelled.COMPUTER CONNECTIONS.on.the.rear.panel.of.the.AdderView.
CATxIP.1000.unit.....
USB keyboard/mouse
A range of different
Sun keyboard/mouse
PS/2-style mouse
connector combinations
are made available
across the five CAM
formats
Note: Each CAM is
specifically shaped so
that it can be secured
PS/2-style keyboard
Audio
using a cable tie around
its middle. In this way,
two CAMs can also be
neatly joined together,
back-to-back..
AdderView CATxIP
ꢀ000 rear panel
Video
3. Lay.a.suitable.length.of.category.5,.5e.or.6.cabling.between.the.computer.
system.and.the.AdderView.CATxIP.1000.unit..The.maximum.length.of.the.
cable.can.be.up.to.10.metres.(32.feet),.however,.bear.in.mind.that.the.
overall.distance.between.a.remote.user.and.any.computer.must.not.exceed.
300.metres.(980.feet).
Category ꢄ, ꢄe or ꢅ
cable from CAM
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Power in connection
USER
GLOBAL
USER
2. Connect.the.IEC.connector.of.the.supplied.country-specific.power.lead.to.
The.AdderView.CATxIP.1000.unit.is.supplied.
with.a.standard.5V.power.adapter..There.is.no.
on/off.switch.on.the.unit,.so.operation.begins.
as.soon.as.a.power.adapter.is.connected.
the.socket.of.the.power.adapter.
IP
POWER
IN
CAM
COMPUTER
SYSTEM
SWITCH
To connect the power supply
1. Attach.the.output.lead.from.the.power.adapter.to.the.5V.socket.on.the.rear.
panel.of.the.AdderView.CATxIP.1000.
AdderView CATxIP
ꢀ000 rear panel
3. Connect.the.power.lead.to.a.nearby.main.supply.socket.
Note: Both the AdderView CATxIP 1000 and its power supply generate heat
when in operation and will become warm to the touch. Do not enclose them
or place them locations where air cannot circulate to cool the equipment. Do
not operate the equipment in ambient temperatures exceeding 40 degrees
Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
OPTION
S
5
V
2
.0
16
A
1
1
2
COMPUT
1
output lead from
power adapter
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect and address the switch boxes
Power control port
USER
GLOBAL
USER
Note: The AdderView CATxIP 1000 unit can be powered on during this
procedure, however, the switch boxes should be switched off. The configuration
steps below are for the Adder EPS-M8 and EPS-S8 power switches. Other power
switches may require different configuration. Please refer to your power switch
documentation.
The.options.port.of.the.AdderView.CATxIP.
1000.can.be.used.to.connect.to.one.or.more.
optional.power.control.units..This.allows.you.to.
control.the.mains.power.being.supplied.to.the.
connected.computer(s).so.that.an.authorised.
user.can,.if.necessary,.perform.a.complete.
remote.cold.reboot.on.a.failed.system.
IP
IN
CAM
1. Mount.up.to.four.switch.boxes.in.positions.where.they.are.close.to.the.
computer.systems.that.they.will.control.and.not.too.distant.from.the.
AdderView.CATxIP.1000.unit.(preferably.within.2.5.metres).
COMPUTER
SYSTEM
POWER
SWITCH
The.control.connector.of.the.first.power.switch.
is.attached,.via.serial.cable,.to.the.rear.panel.of.
2. Use.a.serial.cable.with.an.RJ9.and.a.9-pin.D-type.connector.(see.Appendix
first.switch.box..Attach.the.other.end.to.the.socket.marked.OPTIONS.on.the.
AdderView.CATxIP.1000.
the.AdderView.CATxIP.1000..Any.additional.power.switches.are.then.attached.
via.a.‘daisy-chain’.arrangement.to.the.first.power.switch..Each.power.switch.box.
is.then.given.a.unique.address.and.access.to.each.power.port.(8.ports.on.each.
power.switch.box).is.gained.using.a.combination.of.the.switch.box.address.and.
the.port.number..
AdderView CATxIP
ꢀ000 rear panel
‘Daisy-chain’
control
connections
Power
switch
boxes
LOC REM OSD UPG LCK PWR
Serial cable to first
power switch box
OPTIONS
KVM
only
5V
2
.0
16
A
IN
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
6
6
6
6
7
7
7
7
8
8
8
8
Box ꢀ
1
OUT
IN
5
5
5
Box ꢁ
Box ꢂ
1
2
OUT
Power to computer
Box ꢁ, port ꢅ - address: ꢁꢅ
3. For.each.of.the.remaining.switch.boxes.(if.used),.use.a.serial.cable.with.RJ9.
end.to.the.socket.marked.OUT.of.the.previous.box.and.the.other.end.to.the.
socket.marked.IN.of.the.next.box..
IN
OUT
Box Switch ꢀ Switch ꢁ.
4. Set.the.addressing.switches.on.each.switch.box.
using.the.two.micro.switches.marked.‘Slct’.on.
the.front.panel..The.box.connected.directly.to.
the.AdderView.CATxIP.1000.is.Box.1.and.so.on,.
down.the.daisy-chain.line.to.Box.4.at.the.end.
IN
Box ꢃ
. 1...
. 2.
. 3.
. 4.
Off.
On.
Off.
On.
Off
Off
On
On
The.power.ports.are.connected.to.the.power.inputs.of.each.computer.system.
and.the.power.switch.box(es).are.then.connected.to.a.mains.power.supply.
5. Attach.IEC.to.IEC.power.leads.between.
each.port.and.the.power.input.socket.of.
each.computer.system.that.requires.power.
switching..Carefully.note.to.which.power.
IMPORTANT: Power switching devices have a maximum current rating. It is
essential to ensure that the total current drawn by the equipment connected
to the power switching device does not exceed the current rating of the power
switching device. You must also ensure that the current drawn from any mains
socket does not exceed the current rating of the mains socket.
Off = switch upwards
On = switch downwards
Switch ꢀ is on the left side
ports,.on.which.boxes,.each.computer.system.is.connected..If.computer.
systems.have.multiple.power.inputs,.then.each.input.must.be.connected.via.
separate.ports,.which.can.be.on.the.same,.or.different.boxes.
Setting.up,.configuring.and.using.power.switching.requires.three.main.steps:
•. Connect.and.address.the.switch.boxes.
6. Connect.each.box.to.a.suitable.mains.power.input..
Now.proceed.to.the.configuration.stage.covered.in.the.Power switching
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cascading multiple units
X200
The.AdderView.CATxIP.1000.units.
support.up.to.eight.or.sixteen.
directly.connected.computer.
systems,.however,.this.is.by.
no.means.the.limit..Instead.of.
connecting.computers.to.every.
output.port,.you.can.instead.link.
AdderView.CATx.1000.units.(not.
IP.variants)..Thus,.each.output.of.
the.original.AdderView.CATxIP.
1000.unit.can.link.through.to.
many.more.computers.connected.
to.the.secondary.AdderView.CATx.
1000.units.
The cascade tree
The.diagram.shows.how.an.AdderView.CATxIP.1000.unit.and.
multiple.AdderView.CATx.1000.units.can.be.cascaded.to.two.levels..
Computer.systems.can.be.connected.at.any.level..The.local.or.global.
users.can.access.computer.systems.situated.anywhere.within.the.
cascade.tree...
CAM
Cascade
level 1
AdderView CATxIP 1000
The.combination.of.AdderView.
units.can.be.arranged.two.levels.
deep.forming.a.tree,.or.cascade.
arrangement,.with.computer.
systems.situated.at.either.level.
within.that.cascade.tree.
CAM
CAM
CAM
CAM
Note: It is not possible to cascade
two AdderView CATxIP 1000 units
together because they do not
have a Remote User Port on their
front panels. The lower units must
always be the non-IP AdderView
CATx 1000 variants.
Cascade
level 2
AdderView CATx 1000
AdderView CATx 1000
CAM
CAM
CAM
CAM
CAM
CAM
CAM
CAM
See also
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting units in cascade
The.method.for.cascading.AdderView.CATxIP.1000.and.AdderView.CATx.
1000.units.is.straightforward.and.requires.no.hardware.settings.or.lengthy.
configuration.process..
To connect units in cascade
1. Ensure.that.power.is.disconnected.from.the.
AdderView.CATxIP.1000.and.all.other.units.
to.be.connected....
7
The.method.of.linking.units.is.the.same.regardless.of.the.cascade.level,.or.
6
number.of.devices.attached..Put.simply:.
2. Connect.one.end.of.the.cascade.link.cable.
to.an.appropriate.COMPUTER CONNECTIONS.
port.on.the.rear.panel.of.the.AdderView.
CATxIP.1000.
5
• A single cascade link is made by connecting a computer connections
socket of the ADDerVieW cAtxip 1000 unit to the remote user port
socket of the ADDerVieW cAtx 1000 unit below it.
Y
COMPUTER
3
ONL
US
CONNECTIONS
2
Please.consider.the.following.when.making.cascade.connections.between.units.
Tips for successful cascading
1
I
•. The.maximum.number.of.levels.for.a.cascade.is.two.
•. For.each.cascade.link,.use.a.standard.category.5,.5e.or.6.twisted-pair.cable,.
terminated.at.each.end.with.an.RJ45.connector..There.must.be.no.crossover.
connections.within.the.cable..The.cascade.link.cables.can.be.up.to.50m.(160.
feet).in.length..Also.ensure.that.the.total.length.from.the.top.AdderView.
CATx.1000.to.any.CAM.does.not.exceed.10m.
•. The.procedure.given.opposite.may.be.carried.out.in.any.order.but.for.
clarity.the.instruction.will.begin.at.the.AdderView.CATxIP.1000.unit..The.
procedure.remains.the.same.regardless.of.exactly.which.cascade.levels.are.
being.connected..The.basic.rule.is.that.each.link.is.made.by.connecting.a.
COMPUTER CONNECTIONS.port.of.the.ADDERVIEW CATxip 1000 (upper.switch).to.
the.REMOTE USER PORT.(on.the.front.panel).of.the.ADDERVIEW CATx 1000.
3. Connect.the.other.end.of.the.cascade.
link.cable.to.the.remote.user.port.
(RJ45.socket).on.the.front.panel.of.
the.AdderView.CATx.1000.unit..
4. Repeat.steps.2.and.3.for.the.cascade.
links.between.the.AdderView.
CATxIP.1000.and.each.AdderView.
CATx.1000.unit.
K
V
M
o
n
l
y
Once.the.units.and.computers.have.been.connected,.you.can.edit.their.names.
section.in.the.‘Host.configuration’.page.of.Appendix.2.for.more.details.
See also
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
1203
Addressing computers in a cascade
Computer.systems.connected.within.a.cascade.arrangement.are.addressed.
using.up.to.four.digits,.two.for.each.cascade.level..The.pairs.of.digits.specify.
which.of.the.COMPUTER CONNECTIONS.ports.on.each.of.the.AdderView.CATx.
1000.units.must.be.enabled.to.reach.a.specific.computer..In.the.diagram.given.
here,.a.portion.of.the.previous.cascade.diagram.indicates.how.the.routes.to.two.
particular.computers.are.formed.and.addressed....
AdderView CATxIP 1000
Port 12
at cascade
level 1
Each.cascade.level.requires.two.digits,.hence.the.computer.marked.in.red.
requires.a.longer.address.(1203).as.it.is.situated.at.cascade.level.2,.compared.to.
the.blue.computer.at.the.top.level.with.its.two.digit.port.number.
The.first.time.that.you.make.a.connection.between.an.AdderView.CATxIP.1000.
and.an.AdderView.CATx.1000,.the.master.unit.will.detect.this.and.ask.(via.the.
on.screen.menu).if.you.want.to.automatically.add.computers..If.you.choose.
‘Yes’.then.the.ports.on.the.cascade.will.be.automatically.added.to.the.on.screen.
menu.
The unique
address of
this host is:
CAM
CAM
CAM
CAM
08
Using cascaded computers
AdderView CATx 1000
In.use,.cascaded.computers.can.be.accessed.using.exactly.the.same.methods.
as.for.those.connected.directly.to.the.AdderView.CATxIP.1000..However,.by.
far.the.easiest.way.is.to.use.the.on.screen.menu..This.is.because.it.displays.the.
computer.names.and.does.not.require.any.knowledge.of.port.addresses..See.
user.access).for.more.details.
CAM
CAM
CAM
CAM
The unique address
of this host is:
1203
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple video head connections
LOCAL LOCAL
USER USER
Two.or.more.AdderView.CATxIP.1000.units.can.be.connected.
together.so.that.they.operate.in.a.synchronised.manner..
Synchronised.operation.is.useful.for.applications.that.require.
multiple.video.signals.to.be.switched.together..This.type.of.
operation.is.usually.required.where.each.computer.is.fitted.with.
multiple.video.cards.or.video.cards.with.multiple.video.heads..
Whenever.an.AdderView.CATxIP.1000.channel.is.switched,.it.sends.
an.RS232.command.out.on.its.serial.interface.(marked.OPTIONS.on.
the.rear.panel)..An.AdderView.CATxIP.1000.will.switch.its.channel.if.
it.receives.the.same.command.on.its.serial.interface..Consequently,.
by.linking.the.serial.interfaces,.a.master.unit.may.be.made.to.
automatically.switch.one.or.more.slave.units.as.shown.in.the.diagram.
Slave AdderView CATxIP ꢀ000
Serial
synchronisation
cable
CAM CAM
HOST
COMPUTER
16
15
14
13
8
7
6
5
OPTIONS
5V
2.0A
12
11 10
COMPUTER CONNECTIONS
9
4
3 2 1
COMPUTER CONNECTIONS
Note: You must ensure that all AdderView CATxIP 1000.units have their Options serial
ports set to ‘Sync Units’ and that their baud rates are identical. These settings can be made
16
15
11
14
13
8
7
6
5
It.should.be.noted.that.the.synchronisation.cable.deliberately.does.not.have.the.transmit.
pin.of.the.Slave.End.connector.linked.to.the.receive.pin.of.the.Master.End.connector..To.
do.so.would.cause.the.Slave.unit.to.be.able.to.switch.the.Master.unit..This.would.setup.
an.endless.cyclical.switching.sequence.that.would.prevent.the.AdderView.CATxIP.1000.
devices.from.operating.correctly..For.more.details.about.the.serial.synchronisation.cables,.
OPTIONS
5V
2.0A
12
10
9
4
3 2 1
COMPUTER CONNECTIONS
COMPUTER CONNECTIONS
Master AdderView CATxIP ꢀ000
Notes
Slave monitor
Master monitor
It is recommended that the
second CAM in each pair is a
USB-type and that it is plugged
to a vacant USB port on the host
computer to derive its power.
CAM CAM
CAM CAM
Pairs of CAMs can be strapped
back-to-back with cable ties to
create a tidy installation...
..
Computers fitted
with dual video
heads
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote switching control
The.port.switching.functions.of.the.AdderView.CATxIP.
1000.units.can.be.remotely.controlled.by.an.RS232.link.to.
the.OPTIONS.port.on.the.rear.panel.
REMOTE
CONTROL
The.sending.device.must.use.the.following.RS232.
communication.settings:.
AdderView CATxIP ꢀ000
rear panel
Baud.rate:.. 19200.bps.
Data.bits:. 8.
Parity:.
Stop.bits:.
None.
1
OPTIONS
Cable from serial
control device
5V
No.handshaking.is.implemented,.however,.valid.command.characters.will.be.
2
.0
16
A
echoed.back.to.the.sending.device.
1
Note: You must ensure that the AdderView CATxIP 1000.unit has it Options
serial ports set to ‘Sync Units’. This setting (together with the baud rate
1
2
The.value.of.the.byte.received.via.the.serial.link.determines.which.computer.port.
should.be.linked.through.to.the.user.port..The.table.given.here.summarises.the.
valid.control.codes:.
COMPU
1
Host computer port/channel
(video.off)
0.
.
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢇ
ꢈ
ꢀ0 ꢀꢀ ꢀꢁ ꢀꢂ ꢀꢃ ꢀꢄ ꢀꢅ
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 1A. 1B. 1C. 1D. 1E. 1F. 71.
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Almost.all.configuration.and.operational.aspects.of.the.AdderView.CATxIP.1000.
Overall initial configuration
When.setting.up.a.new.installation,.the.following.stages.are.recommended:
With security disabled (default setting), a local or remote user attached to
the AdderView CATxIP 1000 will have full and unrestricted access to all
computers and all AdderView CATxIP 1000 settings. In larger installations,
you are strongly recommended to enable security and set up individual user
accounts with access privileges.
All AdderView CATxIP 1000 units have a fixed user account that cannot be
deleted or renamed, called ADMIN. This user account is the only one that is
able to make important system changes. If you intend to use security, then it
is important to allocate a password to the ADMIN account.
Use the ADMIN account to add user profiles, passwords and access rights
for each of the system users.
When numerous computers are attached, you are strongly advised to
provide names for each, to assist with recognition.
Use the ADMIN account to determine key AdderView CATxIP 1000 settings
and timing characteristics.
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial configuration
Admin password
The.AdderView.CATxIP.1000.unit.provides.an.initial.configuration..
Enter.a.password.of.at.least.six.characters.that.has.a.mix.of.letters.
and.numerals..The.background.colour.provides.an.indication.of.
password.suitability.and.is.initially.red.to.indicate.that.the.password.is.
not.sufficient..When.a.password.with.reasonable.strength.has.been.
entered.it.will.change.to.green..
sequence.to.assist.you.to.make.the.necessary.settings..
When.the.AdderView.CATxIP.1000.is.switched.on.for.the.first.time,.you.
should.see.the.unit.configuration.screen,.as.shown.here.
ꢀ
ꢁ
ꢂ
ꢃ
.
Time and Date
IMPORTANT: Complete the initial IP configuration and invoke security
measures BEFORE the unit is connected to an open IP network.
Set.these.correctly.as.all.entries.in.the.activity.log.are.time.stamped.
using.them.
Encryption
If.the.AdderView.CATxIP.1000.unit.has.been.previously.configured,..
it.will.display.either.the.Login.dialog.or.the Select.Host.screen,..
as.shown.here.
.
Use DHCP/IP address/Net Mask/Gateway
You.need.to.either.set.the.DHCP.option.to.‘Yes’.or.manually.enter.a.
more.details.
If.the.Login.is.shown,.enter.
your.‘admin’.Username.and.
Password.-.or.press. .twice.if.
none.have.yet.been.defined..
VNC and HTTP ports
These.should.remain.set.to.5900.and.80,.respectively,.unless.they.
From.the.Select.Host.screen,.
press. .to.display.the.Main.
more.details...
Option port (serial) details
These.two.items.control.the.use.of.the.OPTIONS.port.on.the.rear.
panel.of.the.unit..The.port.can.either.be.used.to.control.optional.
power.switching.devices.or.can.be.used.to.synchronise.the.operation.
of.two.separate.AdderView.CATxIP.1000.units.
If.neither.of.these.features.are.required,.then.you.do.not.need.to.
change.anything.on.this.screen...
Within.the.Main.Menu,.use.the.
.and. .keys.to.highlight.an.
option,.then.press. .to.select.
Secure keys generation
With.every.mouse.move.and.keypress,.the.single.dash.will.move.
across.the.screen.(unless.the.same.key.is.pressed.repeatedly)..
Periodically,.a.new.star.character.will.be.added.to.the.bar.as.the.
random.data.are.accepted.as.part.of.the.new.encryption.key..When.
the.bar.is.full,.the.final.encryption.keys.for.your.AdderView.CATxIP.
1000.will.be.created.–.this.process.takes.roughly.30.to.40.seconds..
Once.the.secure.keys.have.been.calculated.the.AdderView.CATxIP.
1000.will.show.either.the.Login.dialog.or.Select.Host.screen.
The.Configuration.option.
provides.access.to.separate.
Unit,.Network.and.Serial.
Configuration.screens.that.are.
similar.in.function.to.the.first.
three.setup.screens.shown.on.
the.right.
Note: Screen 5 of 5 is displayed while
the secure keys are being generated.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Main menu
The.main.menu.allows.you.to.determine.many.aspects.of.the.AdderView.CATxIP.
Hotkeys
Note:
1000.capabilities..From.here.you.can:
and
• Provide.names.for.all.connected.computers.to.allow.quick.recognition,.
• Set.individual.and.global.settings.for.users,.
avoid clashes with other devices or software. If you change the hotkeys,
remember to use the new ones in place of
the instructions in this guide.
and
when following
• Run.various.functions,.such.as.mouse.restore.operation,
• Configure.unit,.network.and.serial.port.settings..
To access the main menu
1. If.the.select.host.menu.is.not.already.displayed,.press.and.hold.
Security
.
.and.
Note: If the security option has been
then.press. .using.a.keyboard.attached.to.a.AdderView.CATxIP.1000.user.
port..
enabled, you will be asked for a valid
user name and password before the
main menu can be displayed.
The.select.host.menu.will.be.displayed:
Availability of each
computer:
IMPORTANT: When supplied, AdderView CATxIP 1000 units have
their security features disabled, which means that any attached
users have access to all connected computers and all AdderView
CATxIP 1000 settings. You are strongly recommended to enable
the ‘Security’ feature and set an access password for the ADMIN
account.
Green - accessible
Red - unaccessible
Default names for
each computer port
Blue - an inconsistency
related to a cascade
linked host has been
detected - More [+]
Port numbers
Main Menu
Functions
Power Control
Connection status
Restore Standard Mouse
Restore Intellimouse
Access Mode
Your Login name
Assistance for
keypress options
User Preferences
Global Preferences
Reminder Banner
Reminder Colour
Screen Saver
2. Press. .to.display.the.main.menu:.
.
Confirmation Box
Menu layout
The.various.menu.options..
are.arranged.as.shown.here.
Mouse Switching
Screen Saver
OSD Dwell Time
User Timeout
For.a.description.of.
each.option.within.the.
Configuration.menus,.see..
Setup Options
Configuration
Security
Hotkeys
Auto Logout
Unit Configuration
Network Configuration
Serial Configuration
Reset Configuration
3. Use.the. .and. .keys.to.highlight.an.option,.then.press. .to.select.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
General security and configuration steps
Registering users and host computers
All.user.and.host.computer.registration.is.achieved.solely.via.the.global.
To enable general security
2. Highlight.‘Setup.Options’.and.press.
.
3. Highlight.‘Security’.and.press.
.(or.click.one.of.the.arrow.buttons).to.
select.‘Enabled’.
4. Now.create.a.new.password.for.the.ADMIN.user.account.-.see.below.
To set an ADMIN password
2. Highlight.‘Configuration’.and.press.
.
3. Highlight.‘Unit.Configuration’.and.press. ..
4. Using.the.cursor.keys,.move.the.cursor.to.the.‘Admin.Passwd’.field..
5. Enter.an.appropriate.password.for.the.ADMIN.user.account.with.regard.to.
the.following:.
•. The.password.can.be.up.to.16.characters.long..
•. The.password.can.use.letters,.numerals.and/or.certain.punctuation.
marks..
•. The.password.is.case.sensitive.
. Note: The field background colour will remain red until sufficient characters
have been entered to form a reasonably robust password..
6. Once.the.password.has.been.entered,.you.can.navigate.away.from.the.
menu.page.and.it.will.be.automatically.saved.
To change the hotkeys
The.AdderView.CATxIP.1000.unit.uses
and.
as.its.standard.hotkeys..
These.can.be.changed.if.they.clash.with.other.software.or.hardware.within.the.
installation..
2. Highlight.‘Setup.Options’.and.press.
.
3. Highlight.‘Hotkeys’.and.press.
.(or.click.one.of.the.arrow.buttons).to.
select.the.required.hotkey.combination..The.options.are:.Ctrl+Alt, Ctrl+Shift,
Alt+Shift, Alt Gr, Left+Right Alt, Left Ctrl+Alt or Right Ctrl+Alt.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if the ADMIN password has been forgotten
If.the.ADMIN.password.becomes.mislaid.or.forgotten,.you.will.not.be.able.to.
access.the.AdderView.CATxIP.1000.to.add.or.edit.users.and.computer.names..
This.situation.may.be.resolved.by.performing.a.complete.reset.to.return.the.
AdderView.CATxIP.1000..
IMPORTANT: A complete reset erases all the user names and computer
names that you have setup.
To clear a password (and restore factory default settings)
1. Remove.power.from.the.AdderView.
CATxIP.1000.unit.
2. Press.and.hold.the.reset.button.on.
the.front.panel.(requires.paper.clip.or.
similar).
3. Apply.power.and.after.a.couple.of.
seconds.release.the.reset.button..The.
Maintenance.menu.will.be.displayed.
4. Highlight.‘Reset.Configuration’.and..
press. ..The.Reset.Config.warning.will.
be.displayed.
5. Highlight.‘Reset’.and.press. ..All.
settings.will.be.returned.to.their.factory.
defaults.and.the.previous.Maintenance.
menu.will.be.re-displayed.
6. Remove.power.from.the.unit.and.then.
re-apply.it.
configuration procedure.and.re-
instate.all.of.the.required.settings.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing IP access control
This.option.removes.all.entries.from.the.IP.access.control.feature.within.the.
AdderView.CATxIP.1000.
What is IP access control?
The.IP.access.control.feature.(configurable.by.a.remote.admin.user).allows.
certain.network.address.ranges.to.be.denied.access.to.the.AdderView.CATxIP.
1000..If.set.incorrectly,.it.is.possible.to.exclude.all.network.users.and.so.this.
option.provides.an.emergency.recovery.point.
To clear IP access control
1. From.a.local.keyboard.(not.accessible.from.a.global.keyboard),.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.select.the.More.Menus.
4. Select.‘Configuration’.
5. Select.‘Network.Configuration’.
6. Highlight.the.‘Clear.IP.Access.Control’.option.and.press.
.
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Full configuration by global user
..To configure the unit from a global user location
1. Use.either.the.VNC.viewer.or.a.standard.web.browser.to.make.remote.
details.
Once.the.basic.features.have.been.configured.using.the.AdderView.CATxIP.
1000.configuration.menus,.further.changes.can.be.made.by.authorised.global.
users.via.the.VNC.interface..There.are.two.main.ways.to.use.the.VNC.interface.
to.access.the.AdderView.CATxIP.1000.unit:.
2. If.the.username.entry.is.not.blanked.out,.enter.‘admin’..Then.enter.the.
admin.password.(if.no.password.is.set,.then.just.press. )..Once.logged.
in,.the.AdderView.CATxIP.1000.will.show.the.video.output.from.the.host.
system.(if.one.is.connected),.or.otherwise.a.‘No.Signal’.message.
downloadable.from.the.Adder.and.RealVNC.websites.or.even.downloadable.
from.the.AdderView.CATxIP.1000.itself.
or.
3. Click.the.Configure.button.in.the.top.right.
hand.corner.of.the.window.to.display.the.main.
contact,.the.AdderView.CATxIP.1000.provides.the.option.to.download.
a.Java.application.to.it..This.allows.a.viewer.window.to.be.opened.and.
operation.to.commence.just.as.it.would.with.the.VNC.viewer.application.
configuration.page.
.
Allows.you.to.create.and.manage.up.to.sixteen.separate.user.accounts,.
each.with.separate.access.permissions.
Allows.you.to.alter.both.basic.and.fundamental.settings.within.the.unit.
Allows.you.to.configure.all.aspects.relating.to.time.keeping.within.the.unit.
Here.you.can.alter.any.of.the.existing.network.settings.plus.you.can.take.
advantage.of.the.IP.access.control.feature.that.lets.you.to.specifically.include.
or.exclude.certain.addresses.or.networks.
Lets.you.setup.or.alter.the.details.concerning.the.OPTIONS.serial.port.
Allows.you.to.configure.user.access,.hot.key.switching.and.
power.control.codes.for.the.connected.host.systems.
Provides.various.details.about.the.user.activity.on.the.unit.
Shaded.items.signify.
Allows.you.to.configure.settings.which.enable.the.unit.to.
consult.external.databases.in.order.to.verify.user.details.
options.that.are.not..
available.via.the.standard.
configuration.menus.
For.more.information.about.each.page,.please.see.Appendix 2 -
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Encryption settings
The.AdderView.CATxIP.1000.offers.a.great.deal.of.flexibility.in.its.configuration.
and.this.extends.equally.to.its.encryption.settings.that.are.used.to.prevent.
unauthorised.interception.of.signals..Due.to.the.variety.of.situations.in.which.
the.AdderView.CATxIP.1000.might.be.used.and.the.range.of.viewer.applications.
that.need.to.view.it,.a.number.of.settings.are.available..The.encryption.settings.
to.use.depend.upon.how.the.potential.global.users.will.operate.
Important.factors.to.consider.when.setting.these.options.might.be:
•. Do.all.global.user.connections.and.operations.require.encryption?
•. Will.some.global.users.be.using.older.VNC.viewer.versions?
AdderView CATxIP ꢀ000 encryption settings
The.AdderView.CATxIP.1000.configuration.menu.offers.three.encryption.
settings:
•. Always on.-.This.setting.will.force.all.viewers.to.use.encryption..Note:
This setting will preclude any VNC viewer versions that do not support
encryption..
•. Prefer off.-.This.setting.does.not.enforce.encryption.unless.a.viewer.
specifically.requests.it..If.a.viewer.has.its.‘Let.server.choose’.setting,.then.an.
un-encrypted.link.will.be.set.up.
•. Prefer on.-.This.setting.generally.enforces.encryption.unless.an.earlier.
viewer.version.is.unable.to.support.it,.in.which.case.the.link.will.be.un-
encrypted..If.a.viewer.has.its.‘Let.server.choose’.setting,.then.the.link.will.be.
encrypted.
Viewer encryption settings
The.web.browser.viewers.and.VNC.viewers.(of.level.4.0b5S.or.higher).offer.four.
encryption.settings:
•. Always on.-.This.setting.will.ensure.that.the.link.is.encrypted,.regardless.of.
the.AdderView.CATxIP.1000.encryption.setting.
•. Let server choose.-.This.setting.will.follow.the.configuration.of.the.
AdderView.CATxIP.1000..If.the.AdderView.CATxIP.1000.has.‘Always.on’.or.
‘Prefer.on’.set,.then.the.link.will.be.encrypted..If.the.‘Prefer.off’.setting.is.
selected.at.the.AdderView.CATxIP.1000,.then.the.link.will.not.be.encrypted.
•. Prefer off.-.This.setting.will.configure.an.un-encrypted.link.if.the.
AdderView.CATxIP.1000.will.allow.it,.otherwise.it.will.be.encrypted.
•. Prefer on.-.If.the.AdderView.CATxIP.1000.allows.it,.this.setting.will.
configure.an.encrypted.link,.otherwise.it.will.be.un-encrypted..
...
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Networking issues
Thanks.to.its.robust.security.the.AdderView.CATxIP.1000.offers.you.great.
flexibility.in.how.it.integrates.into.an.existing.network.structure..The.AdderView.
CATxIP.1000.is.designed.to.reside.either.on.an.internal.network,.behind.a.
firewall/router.or.alternatively.with.its.own.direct.Internet.connection..
Positioning AdderView CATxIP 1000 in the network
Every.network.setup.is.different.and.great.care.needs.to.be.taken.when.
introducing.a.powerful.device.such.as.the.AdderView.CATxIP.1000.into.an.
existing.configuration..A.common.cause.of.potential.problems.can.be.in.clashes.
with.firewall.configurations..For.this.reason.the.AdderView.CATxIP.1000.is.
designed.to.be.intelligent,.flexible.and.secure..With.the.minimum.of.effort.it.
can.reside.either.behind.the.firewall.or.alongside.with.its.own.separate.Internet.
connection.
Internet
Internet
Firewall/
router
Firewall/
router
LOC REM VNC 100 LNK PWR
LOC REM VNC 100 LNK PWR
Local.
network.
connection
CATx.link.
CAM to.host.
CATx.link.
to.host.
computer
Local.
network.
connection
CAM
computer
AdderView CATxIP ꢀ000
situated behind the firewall
AdderView CATxIP ꢀ000
situated alongside the
IMPORTANT: When the AdderView CATxIP 1000 is accessible from the public
employed.
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need to change the VNC port number
Placing AdderView CATxIP 1000 behind a router or firewall
A.possible.point.of.contention.between.the.AdderView.CATxIP.1000.and.a.
firewall.can.occasionally.arise.over.the.use.of.IP.ports..Every.port.through.the.
firewall.represents.a.potential.point.of.attack.from.outside.and.so.it.is.advisable.
to.minimise.the.number.of.open.ports..The.AdderView.CATxIP.1000.usually.uses.
two.separate.port.numbers,.however,.these.are.easily.changeable.and.can.even.
be.combined.into.a.single.port.
If.you.change.the.VNC.port.to.anything.other.than.5900,.then.each.VNC.viewer.
user.will.need.to.specify.the.port.address.as.well.as.the.IP.address..For.instance,.
if.you.set.the.VNC.port.to.‘11590’.and.the.IP.address.is.‘192.168.47.10’.then.
VNC.viewer.users.will.need.to.enter:.
192.168.47.10::11590
(Note.the.double.colons.that.separate.the.IP.address.and.port.number)..
IMPORTANT: The correct configuration of routers and firewalls requires
advanced networking skills and intimate knowledge of the particular network.
Adder Technology cannot provide specific advice on how to configure your
network devices and strongly recommend that such tasks are carried out by a
qualified professional.
The.firewall/router.would.also.need.to.be.informed.to.transfer.all.traffic.to.the.
new.port.number.through.to.the.AdderView.CATxIP.1000.
Addressing
When.the.AdderView.CATxIP.1000.is.situated.within.the.local.network,.you.
will.need.to.give.it.an.appropriate.local.IP.address,.IP.network.mask.and.default.
gateway..This.is.achieved.most.easily.using.the.DHCP.server.option.which.
will.apply.these.details.automatically..If.a.DHCP.server.is.not.available.on.the.
network,.then.these.details.need.to.be.applied.manually.in.accordance.with.the.
network.administrator.
Port settings
types.of.viewer:.
•. Port 80.for.users.making.contact.with.a.web.browser,.and.
•. Port 5900.for.those.using.the.VNC.viewer.
The.firewall/router.must.then.be.informed.to.route.incoming.requests.to.port.
5900.or.port.80.(if.available).through.to.the.local.address.being.used.by.the.
AdderView.CATxIP.1000...
When.these.port.numbers.are.used,.VNC.viewers.and.web.browsers.will.locate.
the.AdderView.CATxIP.1000.correctly.using.only.its.network.address..The.
firewall/router.must.be.informed.to.transfer.any.traffic.requesting.these.port.
numbers.through.to.the.AdderView.CATxIP.1000..
When a web server is also on the local network
Port.80.is.the.standard.port.used.by.web.(HTTP).servers..If.the.AdderView.
CATxIP.1000.is.situated.within.a.local.network.that.also.includes.a.web.server.
or.any.other.device.serving.port.80.then,.if.you.want.to.use.the.web.browser.
interface.from.outside.the.local.network.environment,.the.HTTP.port.number.of.
the.AdderView.CATxIP.1000.may.need.to.be.changed.
Remote.user.with.VNC.viewer.
accesses.IP.address:.129.7.1.10.
and.automatically.uses.port.
5900..
Internet
When.you.change.the.HTTP.port.to.anything.other.than.80,.then.each.remote.
browser.user.will.need.to.specify.the.port.address.as.well.as.the.IP.address..For.
instance,.if.you.set.the.HTTP.port.to.‘8000’.and.the.IP.address.is.‘192.168.47.10’.
then.browser.users.will.need.to.enter:.
AdderView.CATxIP.1000.has.
a.local.address.and.net.mask,.
i.e..
Firewall/router address:
ꢀꢁꢈ.ꢆ.ꢀ.ꢀ0
(Note.the.single.colon.that.separates.the.IP.address.and.the.port.number)..
The.firewall.routes.the.
request.from.the.VNC.viewer.
on.port.5900.through.to.the.
AdderView.CATxIP.1000.at.
local.address.192.168.0.3
IP.address:.192.168.0.3
Net.mask:.255.255.255.0
LOC REM VNC 100 LNK PWR
The.firewall/router.would.also.need.to.be.informed.to.transfer.all.traffic.to.the.
new.port.number.through.to.the.AdderView.CATxIP.1000.
.
CAM
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
To discover a DHCP-allocated IP address
Once.a.DHCP.server.has.allocated.an.IP.address,.you.will.need.to.know.it.in.
order.to.access.the.AdderView.CATxIP.1000.via.a.network.connection..To.
discover.the.allocated.IP.address:
Once.the.page.is.saved,.the.AdderView.CATxIP.1000.will.contact.the.DHCP.
server.and.obtain.a.new.address.
2. Re-enter.the.same.‘Network.configuration’.screen.where.the.new.IP.address.
and.network.mask.should.be.displayed..
DNS addressing
As.with.any.other.network.device,.you.can.arrange.for.your.AdderView.CATxIP.
1000.to.be.accessible.using.a.name,.rather.than.an.IP.address..This.can.be.
achieved.in.two.main.ways:
•. For.small.networks.that.do.not.have.a.DNS.(Domain.Name.System).server,.
edit.the.‘hosts’.files.on.the.appropriate.remote.systems..Using.the.hosts.file,.
you.can.manually.link.the.AdderView.CATxIP.1000.address.to.the.required.
name.
•. For.larger.networks,.declare.the.IP.address.and.required.name.to.the.DNS.
server.of.your.local.network..
The.actual.steps.required.to.achieve.either.of.these.options.are.beyond.the.
scope.of.this.document....
...
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Placing AdderView CATxIP 1000 alongside the firewall
AdderView.CATxIP.1000.is.built.from.the.ground-up.to.be.secure..It.employs.a.
sophisticated.128bit.public/private.key.system.that.has.been.rigorously.analysed.
and.found.to.be.highly.secure.(a.security.white.paper.is.available.upon.request.
from.Adder.Technology.Ltd)..Therefore,.you.can.position.the.AdderView.CATxIP.
1000.alongside.the.firewall.and.control.hosts.that.are.also.IP.connected.within.
the.local.network.
Security.can.be.further.improved.by.using.the.following.suggestions:
•. Place.the.AdderView.CATxIP.1000.behind.a.firewall.and.use.the.port.
numbers.to.route.the.VNC.network.traffic.to.an.internal.IP.address.
•. Review.the.activity.log.from.time.to.time.to.check.for.unauthorised.use..
•. Lock.your.server.consoles.after.they.have.been.used...
A.security.white.paper.that.gives.further.details.is.available.upon.request.from.
Adder.Technology.Limited..
IMPORTANT: If you make the AdderView CATxIP 1000 accessible from the public
Internet, care should be taken to ensure that the maximum security available
is activated. You are strongly advised to enable encryption and use a strong
password. Security may be further improved by restricting client IP addresses,
using a non-standard port number for access...
Ports
In.this.configuration.there.should.be.no.constraints.on.the.port.numbers.
because.the.AdderView.CATxIP.1000.will.probably.be.the.only.device.at.that.IP.
address..Therefore,.maintain.the.HTTP.port.as.80.and.the.VNC.port.as.5900.
Ensuring sufficient security
The.security.capabilities.offered.by.the.AdderView.CATxIP.1000.are.only.
truly.effective.when.they.are.correctly.used..An.open.or.weak.password.or.
unencrypted.link.can.cause.security.loopholes.and.opportunities.for.potential.
intruders..For.network.links.in.general.and.direct.Internet.connections.in.
particular,.you.should.carefully.consider.and.implement.the.following:
Addressing
When.the.AdderView.CATxIP.1000.is.situated.alongside.the.firewall,.it.will.
require.a.public.static.IP.address.(i.e..one.provided.by.your.Internet.service.
provider).
More.addressing.information:
•. Ensure.that.encryption.is.enabled...
•. Ensure.that.you.have.selected.secure.passwords.with.at.least.8.characters.
and.a.mixture.of.upper.and.lower.case.and.numeric.characters..
•. Reserve.the.admin.password.for.administration.use.only.and.use.a.non-
admin.user.profile.for.day-to-day.access...
•. Use.the.latest.Secure.VNC.viewer.(this.has.more.in-built.security.than.is.
•. Restrict.the.range.of.IP.addresses.that.are.allowed.to.access.the.AdderView.
•. Do.NOT.Force.VNC.protocol.3.3..
•. Ensure.that.the.computer.accessing.the.AdderView.CATxIP.1000.is.clean.
of.viruses.and.spyware.and.has.up-to-date.firewall.and.anti-virus.software.
loaded.that.is.appropriately.configured..
•. Avoid.accessing.the.AdderView.CATxIP.1000.from.public.computers.
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Power switching configuration
Power control sequences
Power.switch.configuration.comprises.two.main.steps:
Note: The settings given below are for the EPS-S8 power switch - other power
switches may require different settings. Please refer to your power switch
documentation for details about codes required by other power switches.
•. Configure.the.OPTIONS.serial.port.to.the.same.speed.as.used.by.the.power.
The.structure.of.each.power.sequence.(OFF.and.ON).is.as.follows:
•. Configure.power.ON.and.OFF.strings.for.each.relevant.host.computer.
For.each.power.port.there.needs.to.be.a.valid.‘Power.ON.string’.and.similarly.an.
appropriate.‘Power.OFF.string’..In.each.case,.the.strings.are.a.short.sequence.of.
characters.that.combine.a.port.address.and.a.power.on.or.off.value..
Pxy=z\0D.
Where:.
If.a.particular.computer.has.more.than.one.power.input.(and.thus.requires.an.
equivalent.number.of.power.ports.to.control.them),.collections.of.strings.can.be.
combined.to.switch.all.of.the.required.ports.together.as.a.group.
x.is.the.switch.box.number,
y.is.the.power.port.number,..
z.is.‘0’.for.OFF.or.‘1’.for.ON,.and
\0D.represents.Enter.(or.Carriage.return).
To configure the power sequences for each host computer
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
Example 1
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Host.configuration’.option.
To.switch.ON.port.5.of.switch.box.2,.the.code.would.be.as.follows:
•. Power.sequence:..
P25=1\0D
4. Click.a.host.entry.to.display.a.Host.configuration.dialog:
Example 2
To.switch.OFF.port.8.of.switch.box.3,.the.code.would.be.as.follows:
•. Power.sequence:.. P38=0\0D
the.Operation.chapter.
To control two or more ports simultaneously
You.can.control.up.to.four.power.ports.using.a.single.sequence..This.is.done.
using.the.same.command.structure.as.shown.above,.plus.a.delay.command,.
for.each.port..Immediately.following.a.port.command,.insert.the.characters.
‘\*’.before.the.next.port.command,.and.so.on.up.to.four.ports..For.instance,.to.
switch.on.ports.1.and.2.in.the.first.power.switch,.the.command.line.would.be:
6. Enter.the.Power control sequences.in.the.Power.On.and.Power.Off.fields.
7. Click.OK.to.close.the.dialog.and.then.click.the.Save.button.in.the.main.Host.
Configuration.window.to.store.the.details.
.
P11=1\0D\*P12=1\0D
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading AdderView CATxIP 1000 models
8. Click.the.‘Browse’.button.and.locate.the..bin.upgrade.file.that.you.
downloaded.earlier..Click.the.‘Upload.file’.button..The.AdderView.CATxIP.
1000.will.next.show.the.following.screen:
The.AdderView.CATxIP.1000.models.are.upgraded.via.global.connection.
(through.the.IP.network.port)..Upgrades.are.digitally.signed.by.Adder.using.
a.secure.key..This.prevents.unauthorised.or.altered.firmware.images.being.
downloaded.into.the.AdderView.CATxIP.1000.
To upgrade AdderView CATxIP ꢀ000 models
1. Download.the.latest.firmware.revision.for.the.AdderView.CATxIP.1000.
from.the.Adder.website.and.decompress.the.download.file..View.the.
decompressed.files.and.make.a.note.of.the.name.and.location.of.the..bin.
file.that.was.part.of.the.download.file.collection..
as.the.admin.user..
3. Once.logged.in,.click.the.‘Configure’.button.in.the.top.right.corner.of.the.
window.
4. Click.the.‘Unit.Configuration’.button.
5. Click.the.‘Advanced.Unit.Configuration’.button.
6. Click.the.‘Upgrade.Firmware’.
button..This.dialog.will.be.displayed:
9.Select.which.portion.of.the.AdderView.CATx.IP.that.you.wish.to.upgrade:
•. Tick.the.’Main’.option.to.upgrade.the.AdderView.CATxIP.1000.unit.itself...
7. Click.OK..The.AdderView.CATxIP.1000.is.now.ready.to.accept.the.upgrade.
files..Open.your.browser.and.log.into.the.AdderView.CATxIP.1000.using.
the.IP.address.that.was.confirmed.in.the.dialog..Once.connected,.the.
AdderView.CATxIP.1000.will.offer.the.following.screen:
•. Tick.one.or.more.of.the.CAM.options.to.include.them.in.the.upgrade.
process..
10.. When.ready,.click.the.‘Perform.upgrade’.button..The.upgrade.will.take.
place.and.its.progress.will.be.shown.on.screen.
11.. When.the.upgrade.is.complete,.click.the.link.‘Click.here.to.reboot.the.unit.
into.normal.operation’.
Recovering from a failed upgrade
If.a.problem.is.encountered.while.upgrading.the.AdderView.CATxIP.1000,.it.is.
still.possible.to.restart.the.unit.and.attempt.a.new.upgrade.process.
To invoke backup/recovery mode
1. Remove.power,.press.and.hold.the.reset.button.(insert.a.thin.implement.
such.as.a.straightened.paper.clip.into.the.small.hole.next.to.the.IP.
connector).and.then.re-apply.power..Then,.release.the.reset.button
2. Access.the.AdderView.CATxIP.1000.using.a.web.browser.on.an.IP.connected.
system..When.the.upgrade.page.is.displayed,.follow.the.normal.instructions,.
except.after.step.10,.remove.and.replace.the.power.on.the.unit....
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Accessing the AdderView CATxIP 1000
The.AdderView.CATxIP.1000.provides.two.ways.to.gain.access:.
The front panel indicators
LOC REM VNC 100 LNK PWR
LOCAL
USER
OR
IP
Indicators
•. LOC.Keyboard.or.mouse.data.are.being.received.from.the.local.console.
•. REM.Keyboard.or.mouse.data.are.being.received.from.a.remote.(global).viewer.
•. VNC.Indicates.that.a.global.user.is.connected.and.active.
•. ꢀ00..Indicates.the.Ethernet.network.speed.(10/100Mbs).
•. LNK.Indicates.that.a.network.link.is.present.
LOC REM VNC 100 LNK PWR
•. PWR.Indicates.that.power.is.present..
CAM
COMPUTER
SYSTEM
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a computer
Local user access
There.are.three.main.ways.for.local.users.to.select.a.specific.computer.channel:
To gain access as a local user:
1. From.the.local.keyboard,.press.any.key.to.display.the.login.prompt:
access.a.small.number.of.computers.
many.connected.computers.
Enter your Login
name here
number.of.computers.
If the above login prompt is not displayed, you
are either already logged in to the AdderView
CATxIP ꢀ000 unit, or the security features have
not been enabled. In such cases see ‘To view this
menu at any time’ below.
port.is.selected,.a.pop.up.message.will.be.displayed.to.confirm.the.computer.
name.or.number,.and.its.status..Alternatively,.an.error.message.explaining.why.a.
connection.is.not.possible.(press. .to.cancel.the.latter.type.of.message).
2. Enter.your.username.and.password..Providing.you.have.the.correct.
permissions,.the.screen.will.display.the.Select.Host.menu,.showing.you.a.list.
of.computers.for.which.you.have.permission.to.access:.
To avoid the ‘hall of mirrors’ effect
IMPORTANT: Never configure a system so that your viewer is viewing itself.
These indicators show
the availability of each
computer:
When.controlling.a.host.computer.via.the.local.user.port.or.a.remote.user.port,.
if.the.host.computer.is.networked.it.is.possible.to.make.the.VNC.viewer.or.a.
browser.to.create.a.link.back.to.itself.via.the.global.(IP).capabilities.of.the.unit..This.
will.set.up.a.‘hall.of.mirrors’.effect,.where.the.computer.is.viewing.itself.into.infinity.
Green - accessible
Red - unaccessible
Default names for
each computer port
Blue - an inconsistency
related to a cascade-
linked host has been
detected - More [+]
While.technically.possible,.the.AdderView.CATxIP.1000.unit.is.not.designed.to.
withstand.this.treatment.and.could.sustain.damage......
This column shows
the AdderView CATxIP
ꢀ000 address for
each computer. If you
wanted to select ports
using the hotkey
method, these are
addresses that you
would enter.
To select a computer using hotkeys
1. Simultaneously.press.and.hold.
.and.
.
Note: The and keys when pressed in combination are called
‘hotkeys’ and they signal to the AdderView CATxIP 1000 that you wish to
control it, rather than the computer. However, if these particular hotkeys
clash with another device or program, then your administrator may change
Your Login name
Link status of your
user port
them to a different combination. If the
combination fails to work,
then please contact the system administrator for details.
To.view.this.menu.at.any.time:.Press.and.hold.the.hotkeys.(usually.
then.press. .and.finally.release.all.three.keys.
.and.
),.
2. While.still.holding.
address,.then:.
.and.
,.press.the.first.numeral.of.the.required.port.
Note: The
and
keys when pressed in combination are called ‘hotkeys’
•. If.the.port.address.is.a.single.character,.release.all.of.the.keys.
and they signal to the AdderView CATxIP 1000 that you wish to control it, rather
than the host computer. However, if these particular hotkeys clash with another
device or program, then your administrator may change them to a different
•. If.the.port.address.is.two.or.more.characters,.release.the.first.numeral.
key.and.press.the.second.–.repeat.this.procedure.until.all.of.the.port.
address.numerals.have.been.entered,.then.release.
.and.
...
combination. If the
.
.
combination fails to work, then please contact
Note: The numbers on your keyboard’s numeric keypad are not valid, use
only the numeral keys above the QWERTY section.
your system administrator for details.
To move the menu (and login) box position
Note: If your user port does not have authorisation to view the selected port
then an ‘Insufficient user rights’ messages will be displayed.
1. While.viewing.any.menu,.press.and.hold.
.and.
.
2. Press.the. ,. ,. .and. .keys.to.move.the.menu.to.the.required.position.
. Note: The new menu position will be used until power is next re-applied.
Note: When using hotkeys, the leading zeros for all single digit port
numbers (including all cascade levels) are optional, i.e. 01, 02...09.
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard hotkeys
To select a computer using the Select Host menu
The.range.of.hotkey.combinations.are.as.follows:
1. Display.the.Select.Host.menu.in.one.of.two.ways:.
Note: If your hotkeys have been changed, substitute them for
the examples given here.
and
in
•. By.simultaneously.pressing.and.then.releasing.
.
.
,.or.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse.
.
.
.
.
.
.
Selects.port.1
Note: The mouse switching option is usable only if the ‘Mouse
Selects.port.2
•.
•.
•
At.this.point,.depending.on.the.security.settings.and.the.current.log.in.
situation,.one.of.two.things.will.be.displayed,.either.the.login.screen,.or.the.
Select.Host.menu:.
•
.
.
.then.
.
Selects.port.10
.
Note: When entering multiple digit addresses as
above, keep and pressed down until all
other numbers have been entered.
.
.
.
.
.
.
Selects.the.next.available.port
The Select Host menu.–.here.you.can.
select.computers.by.name.
Switches.off.the.video.signal.–.this.will.cause.
a.power.saving.monitor.to.enter.its.standby.
mode..To.awaken.the.monitor,.simply.select.
any.fixed.channel.using.any.of.the.suggested.
methods.
.
.
.
.
Logs.out.the.current.user.(if.security.is.enabled).
or.selects.port.0.to.disable.the.video.signal.(if.
security.is.disabled).
.&. ,. ,. .or. .. Moves.the.currently.displayed.on-screen.menu.
2. Use.the. .and. .keys.(or.the.scroll.wheel.of.an.IntelliMouse).to.highlight.
the.required.computer.name..Alternatively.(for.large.configurations),.press.
.to.perform.an.alphabetical.search.for.a.particular.port.name.
around.the.screen..
Note: If security has been enabled then only computers to which the current
user port has permission will be displayed.
3. Press. .to.select.the.highlighted.port.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Logging in and out
The.AdderView.CATxIP.1000.features.a.straightforward.security.system.that.
To select a computer using mouse buttons
helps.to.prevent.unauthorised.access.to.some,.or.all.connected.computers..
Note: This procedure works only with three-button or IntelliMouse devices and
only if the ‘Mouse Switching’ option has been enabled by your administrator.
If.the.security.option.has.been.selected.by.your.administrator.then.you.will.be.
asked.to.enter.a.User Name.and.Password.when.you.first.access.a.user.port..
When.you.have.finished.using.the.computer,.it.is.then.good.practice.to.logout,.
forcing.any.other.users.to.authenticate.themselves.prior.to.use.
1. Hold.down.the.middle.button.(or.scroll.wheel).of.the.mouse.
2. Click.the.left.mouse.button.to.select.the.next.computer.port..When.the.
correct.port.is.reached,.release.the.middle.button..
Note: If the security option has not been enabled then no login is required.
Note: If security has been enabled then only computers to which you have
permission will be displayed.
To log in
1. If.it.is.not.already.displayed,.move.the.mouse.or.press.any.key.to.display.the.
To select a computer using mouse buttons – Advanced method
1. Select.the.on-screen.menu.by.pressing.the.middle.and.right.buttons.of.a.
three.button.mouse.
log.in.screen.
Enter your Login
name here
2. Use.the.scroll.wheel.to.highlight.the.required.computer.port.
3. Then,.select.either:
•. Shared Use.-.press.the.left.mouse.button.-.This.standard.method.allows.
other.users.to.view.the.same.computer.port..Control.of.the.port.is.
given.to.one.user.at.a.time,.on.a.first-come,.first-served.basis.and.is.
relinquished.after.a.certain.period.of.inactivity.
2. Enter.your.designated.User Name.and.press.
.
3. Enter.your.designated.Password.and.press. ..If.both.entries.are.correct.
then.the.selected.port.will.be.displayed.
•. Escape without selecting a port.–.press.the.right.mouse.button.
Note: If either the User Name or Password are incorrect, the entries will be
cleared to allow another attempt.
To log out
Either:
•. Press.
or
.
.and. .at.any.time.to.log.out.
1. Display.the.Select.Host.menu.in.either.of.two.ways:.
•. By.simultaneously.pressing.and.then.releasing.
.
.
..
Note: The
and
hotkeys may have been changed. If the
combination fails to work, then please contact the system administrator
for details.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse,.or
2. Press. ..You.will.be.logged.out.and.the.screensaver.will.be.displayed..Press.
a.key.or.move.the.mouse.to.re-display.the.login.window..
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
The confirmation box
The reminder banner
The.AdderView.CATxIP.1000.provides.
the.option.of.a.confirmation.box.that.is.
displayed.on.screen.for.three.seconds.after.
a.computer.is.selected..The.confirmation.
box.indicates.the.current.user.port.and.your.
user.name,.the.selected.computer.and.the.
connection.status..You.can.enable.or.disable.
the.confirmation.box,.as.required.
As.many.computer.screen.layouts.can.appear.very.similar,.the.AdderView.CATxIP.
1000.provides.a.reminder.banner.option.that.indicates.which.computer.port.you.
are.currently.viewing..The.banner.is.usually.displayed.at.the.top.of.the.screen,.
using.white.lettering.and.transparent.background..You.can:
•. Move.the.banner
•. Change.the.banner.colours,.and/or
•. Disable.the.banner.
To move the reminder banner
1. While.viewing.a.computer.port,.press.and.hold.
To enable/disable the confirmation box
1. Display.the.Select.Host.menu.in.one.of.two.ways:.
.and.
.
Note: The and hotkeys may have been changed. If the combination
fails to work, then please contact the system administrator for details.
•. By.simultaneously.pressing.and.then.releasing.
.
.
,.or.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse..
2. Press.the. ,. ,. .and. .keys.to.move.the.banner.to.the.required.
position.
2. Press. .to.select.‘More.menus’.
To change banner colours or disable the banner
1. Display.the.Select.Host.menu.in.one.of.two.ways:.
3. Highlight.the.‘User.Preferences’.option.and.press. .to.select..
4. Highlight.the.‘Confirmation.Box’.option.and.press.
.to.select.‘Enabled’.
•. By.simultaneously.pressing.and.then.releasing.
.
.
,.or.
or.‘Disabled’,.as.required.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse..
5. Select.the.‘Save’.button.to.return.to.the.previous.menu.
2. Press. .to.select.‘More.menus’.
3. Highlight.the.‘User.Preferences’.option.and.press. .to.select..
4. Select.the.required.option:
•. To.disable.the.banner.–.highlight.‘Reminder.Banner’.and.press.
.
until.‘Disabled’.is.shown.
•. To.change.colours.–.highlight.‘Reminder.Colour’.and.press.
.until.
the.desired.colour.combination.is.displayed.
5. Select.the.‘Save’.button.to.return.to.the.previous.menu.
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
User preferences and functions
Blue dot indicators in the Select Host menu
In.addition.to.customising.the.reminder.banner.as.described.earlier,.you.can.
also:.
Within.the.Select.Host.menu,.each.listed.host.has.a.coloured.dot.associated.with.
it.to.indicate.its.general.status:.Green.for.accessible.and.Red.for.inaccessible..
•. Change.the.colour.of.the.reminder.banner,.
•. Select.the.screen.saver.style,.
•. Restore.mouse.operation,.or.
Green: Host accessible
Red: Host inaccessible
•. Perform.power.control.functions..
Blue: Inconsistency related to
a cascade connection.
There.is,.however,.a.third.state.where.the.dot.turns.Blue..A.blue.dot.against.a.
host.entry.indicates.that.an.inconsistency.relating.specifically.to.cascaded.hosts.
The.problem.can.occur.for.two.main.reasons,.either:
•. A.cascaded.computer.(or.multiple.computers).has.been.added.to.an.
address.such.as.0301,.however,.there.is.still.a.registered.entry.for.a.directly.
connected.host.at.address.03..Thus,.the.now.non-existent.host.at.03.will.be.
marked.with.a.blue.dot.
•. A.previously.connected.cascade.has.been.removed..This.will.cause.all.of.the.
entries.for.the.removed.cascaded.hosts.to.be.marked.with.blue.dots..If.they.
are.not.to.be.re-instated,.then.the.administrator.should.delete.the.entries.
If.you.attempt.to.select.an.entry.marked.with.a.blue.dot.(by.the.menu,.
by.hotkeys.or.from.the.VNC.viewer).you.will.see.an.error.message.stating.
‘computer.not.connected’.
... .....
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Global user access
Global.users.access.the.AdderView.CATxIP.1000.using.a.viewer.and.a.network/
internet.link..There.are.two.types.of.viewer:.a.standalone.VNC.veiwer.or.a.VNC.
Java.application.used.within.a.standard.web.browser.
GLOBAL USER
WEB
OR
Select.the.required.viewer
LOCAL
USER
IP
LOC REM VNC 100 LNK PWR
CAM
COMPUTER
SYSTEM
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Global user access via VNC viewer
The.VNC.viewer.is.a.compact.application.that.runs.on.your.IP-connected.‘global’.
system.and.allows.you.to.view.and.use.the.AdderView.CATxIP.1000.and.its.host.
computer(s)..VNC.viewer.is.readily.available.from.a.number.of.different.sources:
•. from.the.AdderView.CATxIP.1000.installation.CD
•. from.the.AdderView.CATxIP.1000.itself
•. from.the.RealVNC website
Downloading VNC viewer from the AdderView CATxIP 1000
The.AdderView.CATxIP.1000.has.the.ability.to.distribute.its.own.VNC.
viewer.application..
To access via the VNC viewer
1. Locate.and.select.the.VNC.viewer.icon.
To download the VNC viewer
1. Open.your.Web.browser.
.
2. Enter.the.network.address.where.the.AdderView.CATxIP.1000.is.
. A.connection.details.dialog.will.be.displayed:
3. In.the.opening.AdderView.CATxIP.1000.screen,.click.the.link.that.
offers.to.download.the.secure.VNC.viewer.‘from.the.unit’.
Enter the AdderView CATxIP
ꢀ000 address here and click OK
4. Save.the.download.file.(vncviewer.exe).to.your.system.
5. Select.and.run.the.downloaded.file.and.then.connect.to.the.
If required, select the
encryption mode - MORE [+]
AdderView.CATxIP.1000.using.the.VNC.viewer.application.
Options button
Provides.a.range.of.viewer.and.connection.settings.-.MORE [+]
IMPORTANT:.During.login,.if.you.see.a.warning.message.similar.to.the.
one.shown.here,.then.stop.and.do.not.proceed.
2. In.the.‘Server:’.entry,.type.the.address.of.the.AdderView.CATxIP.1000.as.
follows:
v.w.x.y.
. where.v.w.x.y.is.the.IP.network.address,.for.example.192.168.0.3
3. Click.the.OK.button..Depending.on.the.options.selected,.you.may.need.to.
confirm.certain.items..A.connection.attempt.will.be.made.and.if.successful,.
an.authentication.dialog.will.be.displayed:
This.message.is.displayed.if.an.AdderView.CATxIP.1000.unit,.that.your.
viewer.has.previously.visited,.has.had.a.change.of.security.keys..This.
is.not.uncommon.if.a.unit.is.reset.for.some.reason..However,.it.could.
also.mean.that.your.trusted.unit.is.being.spoofed.and.you.may.not.be.
connecting.to.the.system.that.you.think.you.are..
Do.not.click.the.Yes.button.until.you.have.checked.with.your.
administrator.that.the.trusted.AdderView.CATxIP.1000.unit.has.been.
recently.reset.for.some.reason....
and.show.the.current.host.computer..Note: If the Username entry is blanked
out then only admin user account is currently defined and only a password is
required.
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Global user access via web browser
the.AdderView.CATxIP.1000.and.its.host.computer(s)..As.soon.as.you.make.
contact.with.the.AdderView.CATxIP.1000.it.will.begin.downloading.a.small.Java.
application.to.your.browser,.which.will.be.used.only.for.the.duration.of.your.
connection.
To access via your web browser
1. Launch.your.standard.Web.browser.as.usual.
2. In.the.Address.section,.type.the.address.of.the.AdderView.CATxIP.1000.as.
follows:
. where.v.w.x.y.is.the.IP.network.address,.for.example.192.168.0.3
3. Press. ..A.connection.attempt.will.be.made..
4. In.the.browser.window,.select.the.‘Connect.using.built-in.Java.VNC.viewer’.
option.to.download.a.small.application.that.will.temporarily.empower.your.
browser.(on.slow.connections.the.application.download.can.take.several.
tens.of.seconds.to.complete)..Once.complete,.a.connection.details.dialog.
will.be.displayed:
The previously entered
AdderView CATxIP ꢀ000 address
will be shown here
IMPORTANT:.During.login,.if.you.see.a.warning.message.similar.to.the.
If required, select the
one.shown.here,.then.stop.and.do.not.proceed.
encryption mode - MORE [+]
Options button
Provides.a.range.of.viewer.and.connection.settings.-.MORE [+]
5. Make.any.necessary.option/encryption.changes.and.click.the.OK.button.
to.proceed..Depending.on.the.options.selected,.you.may.need.to.confirm.
certain.items....
6. A.second.connection.attempt.will.be.made.and.if.successful,.an.
authentication.dialog.will.be.displayed:
This.message.is.displayed.if.an.AdderView.CATxIP.1000.unit,.that.your.
viewer.has.previously.visited,.has.had.a.change.of.security.keys..This.
is.not.uncommon.if.a.unit.is.reset.for.some.reason..However,.it.could.
also.mean.that.your.trusted.unit.is.being.spoofed.and.you.may.not.be.
connecting.to.the.system.that.you.think.you.are..
Do.not.click.the.Yes.button.until.you.have.checked.with.your.
administrator.that.the.trusted.AdderView.CATxIP.1000.unit.has.been.
recently.reset.for.some.reason....
and.show.the.current.host.computer..Note: If the Username entry is blanked
out then only admin user account is currently defined and only a password is
required....
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the viewer window
Using the viewer window
The.viewer.window.gives.you.the.ability.to.view.and.control.the.AdderView.
CATxIP.1000.and.its.host.computer(s)..Its.operation.is.almost.identical.regardless.
of.whether.you.used.the.VNC.viewer.or.your.Web.browser.to.display.it.
What is the best screen resolution to use?
The.best.resolution.for.your.computer.is.one.that.is.larger.than.the.screen.of.the.host.
computer.that.you.are.viewing..This.will.allow.you.to.see.everything.without.scrolling.
around..Alternatively,.the.VNC.viewer.can.be.set.to.scale.the.image.to.fit.your.screen,.
but.remember.that.some.pixel.dithering.effect.will.be.seen.when.scaling.is.used..
The menu bar
The.viewer.window.presents.a.menu.bar.similar.to.that.shown.below..Certain.
items.within.the.toolbar.are.displayed.depending.upon.your.access.permissions.
and/or.the.AdderView.CATxIP.1000.configuration.
How do I navigate around a larger screen?
If.the.screen.that.you.are.viewing.has.a.larger.resolution.than.your.viewing.window.
you.will.need.to.scroll.around.to.see.all.items..The.viewer.window.allows.you.to.
‘bump.scroll’.(only.in.full.screen.mode)..This.means.that.when.your.mouse.cursor.
bumps.against.the.edge.of.the.screen,.the.screen.image.will.scroll.across.automatically..
(VNC.viewer.
only).Click.the.
VNC.icon.to.
view.the.viewer.
window.options.
Ctrl Alt Del
Sends.the.
Ctrl.Alt.Del.
sequence.
to.the.
Displays.a.menu. Click.to.access.
of.options.
concerning.
keyboard,.video. for.the.current.
Dialogue area
Indicates.your.username.
and.the.host.system.that.
you.are.currently.viewing..
This.area.can.also.display.
the.power.
on/off.options.
How do I escape from full screen mode?
Press.the.F8.button..This.button.is.changeable.but.is.most.often.set.to.F8...
current.host.
computer.
and.mouse.
operation.
host.computer.. other.messages.
Why is the
button flashing red?
This.happens.when.a.new.host.screen.is.viewed.(that.has.not.been.viewed.before)..
Click.the. .button.to.perform.an.auto.calibration.for.the.screen.and.the.mouse..
How do I change between host computers?
The.best.way.to.change.between.host.computers.is.to.click.the.‘Hosts’.button.and.
How do I remove traces of moved items from the screen?
When.you.move.an.item.or.window.across.the.screen,.sometimes.it.can.leave.
unsightly.trails..These.are.called.artifacts.and.can.be.particularly.prevalent.when.the.
connection.speed.is.low..To.remove.artifacts,.click.the.‘Controls’.button.and.select.
Ensures.that.the. Determines.the.
mouse.pointer.
which.you.move. mouse.settings.for.the.
and.the.mouse.
pointer.on.the.
host.system.
are.correctly.
synchronised..
Click.to.
display.a.list.
of.computers.. between.
Choose.an.
entry.to.
connect.to.
that.host.
computer.
Allows.you.
to.choose.
This.option.is.only.
available.to.the.
admin.user.and.
provides.access.
to.the.main.
optimum.video.and/or.
currently.selected.host.
computer..This.button.
will.flash.red.when.
a.new.host.screen.is.
encountered..Click.this.
button.when.you.first.
visit.a.new.screen.
Shared.and.
Private.access.
modes.
How do I make the most of a slow connection?
configuration.
menus.
The.VNC.viewer.is.slightly.better.suited.to.slower.connections.than.the.browser.
when.entering.the.AdderView.CATxIP.1000.address.during.log.on...
Adjust the Threshold setting
suggests..Tweak.this.setting.manually.to.ensure.the.best.setting...
Fewer colours
improvement.and.looks.a.lot.worse.
Rate limit mouse events
When.selected,.this.mode.greatly.reduces.the.mouse.movement.data.that.are.sent.
to.the.host.computer..When.you.move.the.local.mouse,.the.remote.cursor.will.catch.
up.roughly.once.per.second..
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Mouse pointers
Host selection
Both.viewers.provide.a.double.mouse.cursor.to.help.overcome.any.delays.
caused.by.slow.connections..When.you.move.your.mouse.you.will.see.two.
mouse.cursors,.a.local.one.that.responds.immediately.to.your.movements.and.a.
second,.slower.moving,.cursor.that.represents.the.current.mouse.position.at.the.
host.
The.Hosts.button.on.the.menu.bar.provides.the.quickest.and.most.efficient.way.
to.switch.between.host.computers..This.is.because.the.button.is.close.at.hand,.
but.also.because.the.screen.calibration.details.for.each.host.are.reused.when.
Note: The Hosts button is
displayed only when the
switching details for two or more
computers have been declared
within the configuration section
by the admin user.
For.the.browser.viewer,.the.local.
cursor.is.a.typical.arrow:
Local cursor
To select a host
1. Click.the.Hosts.button.to.
display.a.list.of.computers.
Remote host cursor
Note: If there are ten or less
entries, then the list will
appear as a simple drop down
(as shown below).
For.the.VNC.viewer,.the.local.
cursor.is.a.dot:
2. Click.the.required.computer.
name.to.view.and.control.it.
. You.can.use.the.List.Order.
option.to.determine.
Local dot cursor
whether.the.hosts.are.listed.
by.their.entry.number.or.
alphabetically.
Remote host cursor
configuration.for.details.about.
programming.new.hosts.into.the.
AdderView.CATxIP.1000.(‘admin’.user.
status.required).
Additionally,.for.fast.network.
connections,.the.VNC.viewer.also.
provides.a.single.mouse.mode..
details...
Configure
This.option.is.displayed.only.when.you.are.logged.on.as.the.‘admin’.user..When.
selected.it.provides.access.to.a.wide.range.of.AdderView.CATxIP.1000.settings.
Single local cursor
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto calibrate
Re-synchronise mouse .
When.you.visit.a.host.computer.for.the.very.first.time,.your.viewer.needs.to.
determine.the.optimum.video.and.mouse.settings.for.that.particular.computer..
The.button.will.remind.you.to.click.it.by.flashing.red.when.a.new.computer.
screen.is.encountered..Performing.this.step.is.important.because.it.can.help.
to.decrease.unnecessary.video.information.being.sent.across.the.link,.thus.
improving.overall.performance.
If.you.find.that.your.local.mouse.pointer.and.that.of.the.host.are.not.correctly.
synchronised,.use.this.feature.to.re-align.their.movements..This.operation.is.also.
selectable.from.the.Controls.menu.
To re-synchronise the mouse
1. Use.the.Hosts.button.to.select.the.required.computer.
2. Click.the. .button.and.then.click.OK.in.the.subsequent.pop-up.message.
Once.this.has.been.done,.providing.you.use.the.‘Hosts’.button.to.switch.
Note: If you find that this doesn’t work, you may need to perform a mouse
calibration again.
between.host.computers,.the.video.settings.for.each.machine.will.be.re-used.
Note: When performing an auto calibration, ensure that the screen image
is static (no moving images) and also try to remove any on-screen displays
generated by KVM switches (such as host names or menus). This is because
they can affect the calibration process and result in a lower overall performance
level. For mouse calibration, ensure that there are no application windows
located around the upper left corner of the screen. This is because as the mouse
calibration takes place, the cursor may change (to match the application as it
skims across the window) and this may confuse the calculation. Also ensure that
the host computer does not have the mouse cursor trails option enabled.
Access mode - shared/private
Up.to.five.users.can.be.simultaneously.logged-on.(four.global.users.plus.one.
local.or.remote.user).and.during.normal.operation,.all.are.able.to.see.the.same.
view.of.the.currently.selected.host..If.you.need.to.perform.a.sensitive.task.
that.should.not.be.viewed.by.other.users,.you.can.change.the.access.mode.to.
Private..This.action.blanks.the.viewer.window.for.all.other.logged.on.users.
Note: For the courtesy of other users, this mode should be used sparingly. The
admin user has the ability to overrule the private setting.
To auto calibrate the screen and/or mouse
1. Use.the.Hosts.button.to.select.the.required.computer.
To change the access mode
1. Click.one.of.the.arrow.buttons.adjacent.to.the.
Shared/Private.indicator....
2. Click.the. .button.to.display.the.
Calibrate.options.dialog:
3. Click.the.required.action.
. A.progress.indicator.will.be.
displayed.while.the.necessary.
calculations.are.made..
Power switching
When.configured.(and.where.you.have.access.rights).this.option.allows.you.to.
control.the.mains.power.input.to.the.currently.selected.host.computer.
Note: This option is generally used to power cycle remote systems that have
failed to respond. Before switching a system off, ensure that all attempts have
first been made to power it down through normal means.
. Upon.completion.
an.information.
dialog.will.
To switch a system on or off
1. Use.the.Hosts.button.to.select.the.required.computer.
2. Click.the.Power.button.and.then.select.the.Switch.on.
explain.the.
or.Switch.off.option,.as.appropriate.
results:...
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
When.clicked,.this.button.reveals.a.menu.of.
options.concerned.with.keyboard,.video.and.
mouse.operation.
Single Mouse Mode
Mouse Control
This.mode.is.for.fast.network.connections.where.
the.cursor.response.is.sufficient.to.provide.instant.
visual.feedback.on.the.remote.screen..When.
enabled,.the.cursor.is.‘captured’.within.the.viewer.
window.until.you.use.the.‘escape’.hot.keys.
This.option.displays.a.mouse.control.dialog.and.is.useful.when.the.remote.
cursor.is.failing.to.respond.correctly.to.your.mouse.movements,.even.after.using.
the.Resync.mouse.option..
The.mouse.control.dialog.allows.you.to.control.the.remote.mouse.cursor.using.a.
selection.of.buttons.that.you.click.with.your.local.mouse..
To.quit.from.single.mouse.mode,.press.F8.and.then.P..Alternatively,.enable.and.
for.details...
Click to produce a single
mouse click for the left,
centre or right mouse
buttons
The.single.mouse.mode.does.not.require.calibration..
Click to produce a
Resync Mouse
continuous mouse click
and hold for the left,
centre or right mouse
This.option.has.the.same.effect.as.the. .button.on.the.menu.bar.and.re-
synchronises.the.local.and.remote.mouse.pointers..
buttons
Click to move the remote
mouse cursor up, down,
left or right
Refresh Screen
This.option.refreshes.the.whole.screen.image.to.remove.any.artifacts.from.
moved.screen.items..This.is.useful.when.using.very.low.refresh.rates.on.slow.
speed.communication.links.
Click to calibrate the
remote mouse
Info
When.selected,.this.option.displays.an.information.dialog.showing.the.current.
logged.on.users,.the.current.host,.its.video.mode.and.its.mouse.motion.details.
Click to display the Restore
mouse dialog where you
can reinstate a mouse
that has failed to operate
correctly.
continued
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Control
This.option.displays.a.keyboard.control.dialog.and.is.useful.for.sending.keyboard.
combinations.(to.the.host).that.are.needed.regularly.or.that.are.trapped.by.the.
AdderView.CATxIP.1000.
Enter the
code here
Click to send
the code
Click to send the
contents of the
clipboard to the host
When entering codes:
+.. means.press.down.the.key.that.follows
–.. means.release.the.key.that.follows
+–..means.press.down.and.release.the.key.that.follows
*.. means.wait.250ms.(note:.if.a.number.immediately.follows.the.asterisk,.then..
the.delay.will.equal.the.number,.in.milliseconds)
It.is.automatically.assumed.that.all.keys.specified.will.be.released.at.the.end,.so.
there.is.need.to.specify.-Ctrl.or.-Alt.if.these.keys.are.to.be.released.together.
Examples:
‘Ctrl.+.Alt.12’.would.be.expressed.as:.+Ctrl+.Alt+1–1+2
+N.means.press.the.‘N’.key
+Scroll.means.press.the.Scroll.lock.key
+Space.means.press.the.space.key.
Video Settings
see next page
ꢃꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Settings
This.dialog.provides.access.to.all.of.the.key.video.settings.that.determine.image.
Using automatic configurations
quality.and.link.performance.
•. Every.setting.can.be.individually.subjected.to.an.automatic.configuration.
(click.the.appropriate.‘Auto’.button).or.can.also.be.manually.adjusted.
•. Use.the.‘Calibrate.All’.button.to.automatically.determine.the.optimum.
Threshold
settings.for.all.items...
The.threshold.is.effectively.a.
noise.filter.that.differentiates.
between.valid.video.signals.
and.background.noise.or.
interference..This.has.the.
effect.of.reducing.unnecessary.
video.signals.between.the.
AdderView.CATxIP.1000.
and.the.remote.system,.thus.
improving.performance..
Note: Before using the ‘Calibrate All’ option, if possible, remove on-screen
display (OSD) elements generated by the AdderView CATxIP 1000 (such as
a host name label or menu). These OSD elements use different video rates
to those of the host system(s) and can affect the setting of the automatic
threshold value. AdderView CATxIP 1000 uses an improved calculation
procedure to filter out the effect of these elements. However, best results
are obtained when the screen contains only host system information.
Note: To maximise performance, the threshold level is automatically
increased by 50% when a slow link is detected.
Phase
The.phase.setting.adjusts.the.
alignment.of.the.host.video.
output.and.the.remote.system.
video.display.to.achieve.the.
sharpest.image.
Note: When the AdderView CATxIP 1000 is used with one or more other
switches, the threshold needs to be higher than 32 due to the significant
amounts of ‘noise’ that these switches introduce. The AdderView CATxIP
1000 configuration should detect such noise and adjust the threshold
accordingly. .
Horizontal Position
Determines.the.horizontal.
position.of.the.host.screen.
image.within.the.viewer.
window.
Setting the Threshold manually
Occasionally.it.can.be.useful.to.manually.adjust.the.Threshold.setting,.in.order.to.
achieve.a.setting.that.best.suits.your.particular.requirements..
Brightness & Contrast
The.red,.green.and.
blue.constituents.of.the. determine.the.
brightness.and.contrast. optimum.settings. currently.in.
can.be.set.individually..
Alternatively,.use.
the.Auto.button.
on.the.right.side.to.
automatically.optimise.
these.for.the.current.
host.and.connection.
speed.
Calibrate All
Click.to.
Display activity
Indicates.the.level.
of.video.activity.
Vertical Position
Determines.the.vertical.position.
of.the.host.screen.image.within.
the.viewer.window.
1. Use.the.‘Calibrate.All’.function.to.ensure.that.all.other.settings.are.
optimised.
for.all.aspects.of.
video.the.video.
connection.from.
the.host.system.
progress.
2. Click.the.Threshold.left.arrow.button.to.decrement.the.setting.by.one.and.
observe.the.‘Display.Activity’.indicator..
3. Repeat.step.2.until.the.Display.Activity.indicator.suddenly.rises.to.a.much.
higher.level.(i.e..50%)..This.will.mean.that.you.have.reached.the.noise.
boundary..At.this.point,.increment.the.Threshold.value.by.2.or.3.points.to.
achieve.an.optimum.setting.
Custom Modes
See.the.next.page.
Advanced
See.the.next.page.
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Settings
This.option.contains.video.signal.settings.that.do.not.normally.need.to.be.
adjusted....
Pixel Format
Determines.the.colour.
depth.and.data.
required.to.represent.
each.video.pixel....
YUV / RGB
Determines.the.colour.
space.used.by.the.unit.
Tile Width and Height
Overlap Capture
Determines.the.size.of.the.sample.
areas.into.which.the.source.video.
screen.is.divided.for.examination.
purposes..Smaller.sizes.result.in.
more.areas.to.sample,.larger.areas.
result.in.more.frequent.screen.area.
refreshes..16.is.considered.to.be.the.
optimum.size.for.both.the.width.
and.height.settings.
When.enabled,.the.unit.will.begin.capturing.the.
next.frame.of.video.output.from.the.host.computer.
before.it.has.fully.completed.processing.the.current.
frame..In.most.cases.this.produces.better.video.
performance,.however,.when.moving.large.objects.
around.the.screen.(such.as.an.application.window),.
the.video.image.seen.at.the.remote.system.may.
exhibit.temporary.artifacts.as.the.large.image.
moves....
Custom Video Modes
This.option.allows.you.to.define.non-standard.video.resolutions.and.refresh.rates.
to.suit.your.display.characteristics..
Enter.the.horizontal.and.vertical.pixels.counts.together.with.the.refresh.rate.and.
then.click.the.Calc.button..Then.click.the.Add.button.to.include.the.new.mode.
within.the.list.
ꢃꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need to enter a port number
Viewer encryption settings
Usually,.when.you.make.a.network.connection.to.the.AdderView.CATxIP.1000.
(either.using.the.VNC.viewer.or.a.Web.browser).you.simply.enter.the.IP.address,.
i.e..192.168.0.3..However,.if.a.special.configuration.is.necessary,.then.you.may.
be.asked.to.specify.a.port.number.as.well.as.the.IP.address.
The.web.browser.viewers.and.VNC.viewers.(of.level.4.0b5S.or.higher).offer.four.
encryption.options..The.resulting.actions.of.certain.options.depend.upon.how.
the.AdderView.CATxIP.1000.to.which.you.are.connecting.is.configured:.
•. Always on.-.This.setting.will.ensure.that.the.link.is.encrypted,.regardless.of.
the.AdderView.CATxIP.1000.encryption.setting.
•. Let server choose.-.This.setting.will.follow.the.configuration.of.the.
AdderView.CATxIP.1000..If.the.AdderView.CATxIP.1000.has.a.preference.to.
encrypt.the.link,.then.it.will.be.so,.otherwise.the.link.will.not.be.encrypted.
To enter a port number in a Web browser
1. Enter.the.required.IP.address.in.the.usual.Address.box,..
•. Prefer off.-.This.setting.will.configure.an.un-encrypted.link.if.the.
AdderView.CATxIP.1000.will.allow.it,.otherwise.it.will.be.encrypted.
2. At.the.end.of.the.IP.address,.add.a.single.colon.(:).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
•. Prefer on.-.If.the.AdderView.CATxIP.1000.allows.it,.this.setting.will.
configure.an.encrypted.link,.otherwise.it.will.be.un-encrypted..
Whenever.encryption.does.take.place,.the.viewer.will.first.need.to.create.the.
To enter a port number in VNC viewer
1. Enter.the.required.IP.address.in.the.usual.‘Server’.box,..
necessary.secure.key.before.the.connection.process.can.continue.
Supported web browsers
The.following.web.browsers.have.been.tested.and.found.to.work.correctly.with.
AdderView.CATxIP.1000..
2. At.the.end.of.the.IP.address,.add.two.colons.(::).and.then.enter.the.port.
number.(in.this.example,.the.required.port.number.is.8000),.
Windows
•. Internet.Explorer.5.50.and.above,.
with.Microsoft.[Java].Virtual.Machine.(release.5.50).
with.Java.Runtime.Environment.1.3.or.above.
Linux
•. Netscape.4.61.and.above,
with.Java.Runtime.Environment.1.1.or.above.
•. Opera,.
with.Java.Runtime.Environment.1.1.or.above.
ꢃꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Further information
Troubleshooting
This.chapter.contains.a.variety.of.information,.including.the.following:
•. Getting.assistance.-.see.below
Global network users are unable to contact the AdderView CATxIP ꢀ000
•. Check.that.the.correct.address.is.being.used.by.the.remote.users.
•. Troubleshooting.-.see.right
•. Appendices
•. Appendix.1.-.Configuration menus
•. Appendix.2.-.Configuration pages via viewer
•. Appendix.3.-.VNC viewer connection options
•. Appendix.4.-.VNC viewer window options
•. Appendix.5.-.Browser viewer options
•. Appendix.6.-.Addresses, masks and ports
•. Appendix.7.-.Cable specifications
•. Appendix.8.-.Hotkey sequence codes
•. Appendix.9.-.Supported video modes
•. If.the.AdderView.CATxIP.1000.is.situated.behind.a.firewall,.check.that.
correctly.routed.
network.link.is.a.100Mbps.connection,.the.100.indicator.should.also.be.on.
The remote cursor is not correctly responding to my mouse movements
not.have.mouse.cursor.trails.enabled.and.that.the.top.left.corner.of.the.
screen.is.clear.of.application.windows.
When logging on using VNC viewer, I cannot enter a username
admin.user.has.been.configured.on.the.AdderView.CATxIP.1000..
•. Warranty
Getting assistance
If.you.are.still.experiencing.problems.after.checking.the.list.of.solutions.in.the.
Troubleshooting.section.then.we.provide.a.number.of.other.solutions:
. Check.the.Support.section.of.our.website.for.the.latest.solutions.and.driver.
files.
•. Email.–.support@adder.com
•. Fax.
in.the.UK:. 0ꢀꢈꢄꢃ ꢆꢇ00ꢇꢀ
in.the.US:. +ꢀ ꢇꢇꢇ ꢁꢆꢄ ꢀꢀꢀꢆ
. .
•. Phone. in.the.UK:. 0ꢀꢈꢄꢃ ꢆꢇ00ꢃꢃ
. . in.the.US:. +ꢀ ꢇꢇꢇ ꢈꢂꢁ ꢂꢂꢂꢆ
ꢄ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 1 – Local setup menus
The.AdderView.CATxIP.1000.local.setup.menus.allow.a.range.of.settings.to.be.
made.both.to.the.installation.as.a.whole.and.to.parts.of.the.system.accessed.by.
each.user..
To access the local setup menus
1. First.select.the.Select.Host.screen.in.one.of.two.ways:.
•. By.simultaneously.pressing.and.then.releasing.
.
.
,.or.
•. By.pressing.the.middle.and.right.buttons.of.a.three.button.mouse..
2. Press. .to.display.the.Main.Menu.
The.following.items.and.menus.are.available.in.the.Main.Menu.screen:
3. Use.the.following.keys:.
.and. .to.highlight.required.options.
.or.arrow.buttons.to.change.values..
.to.quit.and.save.the.changes.
•. Configuration
. The.full.set.of.options.are.only.available.to.
the.Admin.user..All.other.users.will.see.only.
the.Functions.and.User.Preferences.options..
ꢄꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
The.Functions.menu.contains.a.collection.
of.procedures.that.affect.various.aspects.of.
AdderView.CATxIP.1000.operation...
To get here
1. From.a.local.keyboard,.log.on.as.a.
standard.or.‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Functions’.and.press. ..
Power Control
The.options.within.this.section.are.usable.only.when.the.AdderView.CATxIP.
1000.is.used.in.conjunction.with.one.or.more.external.power.switch.units.
and.when.valid.power.switching.strings.have.been.registered.for.the.
Switch Computer ON
Select.this.option.to.power.on.one.or.more.computers.
Switch Computer OFF
Select.this.option.to.power.off.one.or.more.computers.
Restore Standard Mouse
This.option.is.used.to.resume.standard.mouse.operation.if.it.has.ceased.to.
operate,.for.instance,.if.it.has.been.connected.without.rebooting.the.AdderView.
CATxIP.1000..
Restore Intellimouse
This.option.is.used.to.resume.Microsoft.Intellimouse.operation.if.it.has.ceased.to.
operate,.for.instance,.if.it.has.been.connected.without.rebooting.the.AdderView.
CATxIP.1000..
ꢄꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Preferences
The.User.Preferences.are.system.operating.
parameters.that.are.independently.selectable.
for.each.user.and.affect.only.their.screen..
To get here
1. From.a.local.keyboard,.log.on.as.a.
standard.or.‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘User.Preferences’.and.press. ..
Reminder Banner
Settings: Enabled, Disabled
When.the.reminder.banner.is.enabled,.the.name.of.the.currently.selected.
computer.will.appear.in.a.small.reminder.banner..This.is.normally.located.at.the.
top.of.the.screen.in.a.central.position.but.may.be.moved.as.required.(see.To
Reminder Colour
Settings: Blue/White, Blue/Trans, Pink/Trans, White/Trans, White/Red
You.can.select.the.colour.of.the.reminder.banner..The.Blue/Trans,.Pink/Trans.and.
White/Trans.use.a.transparent.background..
Screen Saver
Settings: Blank, Moving Logo
You.can.select.the.type.of.screen.saver..If.you.select.BLANK.then.the.screen.will.
blank.completely..If.you.select.Moving.Logo.then.a.small.Adder.logo.will.bounce.
around.the.screen..
Confirmation Box
Settings: Disabled, Enabled
When.enabled,.a.confirmation.box.is.displayed.on.screen.for.three.seconds.after.
a.computer.is.selected..The.confirmation.box.indicates.the.current.user.port.and.
user.name,.the.selected.computer.and.the.connection.status.
ꢄꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Global Preferences
Global.preferences.are.available.only.to.
the.Admin.user.and.allow.settings.to.be.
made.that.affect.all.users.attached.to.the.
AdderView.CATxIP.1000.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Global.Preferences’.and.press. ..
Mouse Switching
OSD Dwell Time
Settings: Enabled, Disabled
Settings: 1, 2, 3, 5, 10 Seconds
The.computer.channel.can.be.switched.using.a.three.button.mouse.or.
IntelliMouse..Pressing.the.central.button.or.wheel.button.together.with.the.left.
hand.mouse.button.will.cause.the.AdderView.CATxIP.1000.to.switch.to.the.next.
available.computer..
After.a.successful.computer.channel.change.the.AdderView.CATxIP.1000.will.
display.a.confirmation.message.for.a.few.seconds..The.length.of.time.that.this.
confirmation.message.dwells.on.the.screen.may.be.changed.
User Timeout
Settings: 1, 2, 5, 10, 30 Seconds, 1, 5, 10 Minutes
When.mouse.switching.is.enabled,.you.can.still.use.the.middle.button.on.its.
own.to.control.applications..Only.when.its.pressed.with.the.left.or.right.button.
is.it.interpreted.by.mouse.switching,.otherwise.it.is.passed.on.to.the.host.
application..The.rotation.action.of.an.IntelliMouse.wheel.is.not.affected.and.is.
always.available.to.the.computer.application.
When.no.keyboard.or.mouse.data.has.been.received.from.an.active.user.port.for.
the.user.timeout.period,.the.AdderView.CATxIP.1000.will.relinquish.the.control.
of.that.user.port.in.order.to.allow.other.users.to.access.the.host.computer..The.
new.port.then.becomes.the.active.port.until.it.too.times.out..To.avoid.confusion.
between.users.it.is.desirable.to.set.the.timeout.period.to.be.sufficiently.long.so.
that.user’s.work.is.not.needlessly.interrupted.by.other.users.and.sufficiently.short.
to.ensure.good.overall.system.efficiency..
Screen Saver
Settings: Disabled; 2, 5, 10,15 or 20 Minutes
The.AdderView.CATxIP.1000.can.be.set.to.blank.the.screen.after.no.keyboard.or.
mouse.activity.has.been.detected.for.a.selected.timeout.period..If.preferred,.the.
user.can.blank.the.screen.manually.by.selecting.channel.‘0’.using.the.keyboard.
hotkeys.or.by.pressing.ESC.from.the.login.screen.
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Options
Setup.options.are.available.only.to.the.
Admin.user.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Setup.Options’.and.press. ..
Security
Auto Logout
Settings: Disabled, Enabled
Settings: Disabled, Enabled
With.security.disabled.there.is.no.requirement.for.users.to.log-in.to.the.system..
All.users.have.full.access.to.all.the.connected.computers.and.full.administration.
rights..With.security.enabled,.users.are.required.to.log-in.to.the.AdderView.
CATxIP.1000..Each.user.is.allocated.access.rights.to.computers.by.the.system.
administrator.and.they.are.only.able.to.see.the.computers.that.they.have.access.
to.on.their.on-screen.menu.
The.AdderView.CATxIP.1000.enables.you.to.restrict.access.to.your.computers.
on.a.login.basis..If.a.user.forgets.to.logout.when.they.have.finished.accessing.
the.AdderView.CATxIP.1000.then.the.user.console.may.unintentionally.be.left.
with.full.access.to.all.the.computers..The.AdderView.CATxIP.1000.can.be.set.to.
automatically.logout.unattended.user.consoles.when.the.screen.saver.kicks.in..
This.reduces.the.risk.of.security.problems.by.preventing.user.consoles.remaining.
in.a.permanent.“logged-in”.state.when.there.is.no.keyboard.or.mouse.activity..
The.automatic.logout.feature.is.only.enabled.when.the.screen.saver.feature.is.
active.(i.e..not.disabled).
Hotkeys
Settings: Ctrl+Alt, Ctrl+Shift, Alt+Shift, Alt Gr, Left+Right Alt, Left Ctrl+Alt,
Right Ctrl+Alt
The.keyboard.hotkeys.are.special.combinations.of.keys.that,.when.used.together.
with.certain.keyboard.“command.keys”,.perform.special.AdderView.CATxIP.
1000.functions..For.example,.pressing.the.hotkeys.together.with.the.“M”.key.
will.cause.the.on-screen.menu.to.be.displayed.on.your.monitor..Other.hotkey.
combinations.allow.you.to.query.which.computer.you.are.connected.to.and.
to.move.the.on-screen.menu.around.the.screen..You.can.also.use.the.hotkeys.
together.with.the.port.number.to.select.a.particular.connected.computer.
ꢄꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Available.only.to.the.Admin.user,.the.
configuration.section.menu.allows.you.to.
determine.settings.that.relate.directly.to.the.
global.(IP).user.aspects.of.the.unit.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Configuration’.and.press. ..
IP admin password, encryption settings, etc..
IP address, net mask, VNC port, etc.
Options port usage and Baud rate...
Completely resets the AdderView CATxIP 1000 unit.
ꢄꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Configuration
This.page.provides.access.to.a.selection.of.
both.basic.and.fundamental.settings.for.the.
AdderView.CATxIP.1000..
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Configuration’.and.press. ..
5. Select.‘Unit.Configuration’.and.press. ..
Hardware
Time and Date
Indicates.the.version.of.the.internal.circuitry.
Use.the.left.and.right.arrow.keys.to.select.the.correct.time.and.date..The.time.
entry.uses.the.24.hour.clock.notation..The.internal.real.time.clock.will.continue.
to.run.for.roughly.one.week.without.power.to.the.unit,.after.that.it.will.be.lost.
and.require.resetting..Use.the.up.and.down.arrow.keys.to.move.between.each.
of.the.sections.within.the.time.and.date.entries.
Firmware
Indicates.the.version.of.the.internal.software.
Keybd Layout
Use.the.arrow.buttons.to.match.the.keyboard.layout.expected.by.the.host.
system.
Encryption
Three.options.are.available:.Always.on,.prefer.off,.prefer.on..The.one.to.choose.
details..The.use.of.encryption.imposes.a.slight.performance.overhead.of.roughly.
10%.but.is.highly.secure.against.third.party.intrusion.
Admin Passwd
Enter.the.password.that.will.be.used.to.gain.administrator.access.to.the.
AdderView.CATxIP.1000..There.can.only.be.one.admin.user.and.only.that.user.
is.given.access.to.the.configuration.menus..The.admin.password.background.
will.be.red.until.a.reasonably.secure.password.has.been.entered,.although.this.is.
only.advisory.as.any.password.or.no.password.may.be.entered.
Unit Name
The.name.entered.here.will.be.displayed.on.the.local.menus.and.the.remote.
VNC/browser.windows.
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Configuration
This.page.allows.you.to.configure.the.various.
aspects.of.the.IP.port.and.its.relationship.
with.the.local.network.
Net Mask
Also.often.called.the.‘subnet-mask’,.this.value.is.used.alongside.the.IP.address.
to.help.define.a.smaller.collection.(or.subnet).of.devices.on.a.network..In.this.
way.a.distinction.is.made.between.locally.connected.devices.and.ones.that.are.
reachable.elsewhere,.such.as.on.the.wider.Internet..This.process.helps.to.reduce.
overall.traffic.on.the.network.and.hence.speed.up.connections.in.general..See.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
Gateway
2. Press.
.
.(hotkeys.can.change).
.
This.is.the.address.of.the.device.that.links.the.local.network.(to.which.the.
AdderView.CATxIP.1000.is.connected).to.another.network.such.as.the.Internet..
Usually.this.is.a.network.switch.or.router.and.it.will.be.used.whenever.a.device.
to.be.contacted.lies.outside.the.local.network...
3. Press. .to.show.the.Main.Menu.
4. Select.‘Configuration’.and.press. ..
5. Select.‘Network.Configuration’.&.press.
.
VNC Port
MAC Address
This.is.the.logical.link.through.which.communications.with.a.remote.VNC.viewer.
a.widely.recognised.port.number.for.use.by.VNC.software..However,.in.certain.
circumstances.it.may.be.advantageous.to.alter.this.number.-.see.Security issues
Media.Access.Control.address.–.this.is.the.unique.and.unchangeable.code.that.
was.hard.coded.within.your.AdderView.CATxIP.1000.unit.when.it.was.built..It.
consists.of.six.2-digit.hexadecimal.(base.16).numbers.separated.by.colons..A.
section.of.the.MAC.address.identifies..the.manufacturer,.while.the.remainder.is.
effectively.the.unique.electronic.serial.number.of.your.particular.unit...
Note: The VNC port and HTTP port can be set to the same port number in order
to simplify router and firewall configuration. If this is done then the AdderView
CATxIP 1000 will “listen” for both types of traffic on the single port.
Use DHCP
DHCP.stands.for.‘Dynamic.Host.Configuration.Protocol’..Its.function.is.
particularly.useful.when.connecting.to.medium.size.or.larger.networks,.such.
as.the.Internet..When.this.option.is.selected,.your.AdderView.CATxIP.1000.will.
attempt.to.locate.a.DHCP.server.on.the.network..If.such.a.server.is.located,.it.
will.supply.three.things.to.the.AdderView.CATxIP.1000:.an.IP.address,.an.IP.
network.mask.(also.known.as.a.Subnet.mask).and.a.Gateway.address..These.
are.not.usually.granted.permanently,.but.on.a.‘lease’.basis.for.a.fixed.amount.
of.time.or.for.as.long.as.the.AdderView.CATxIP.1000.remains.connected.and.
HTTP Port
This.is.the.logical.link.through.which.communications.with.a.remote.web.
browser.will.be.channelled..The.default.setting.of.80.is.an.established.standard.
for.web.(HTTP.–.HyperText.Transfer.Protocol).traffic.though.this.can.be.changed.
to.suit.your.local.network.requirements.
Clear IP Access Control
This.option.removes.all.entries.from.the.IP.access.control.feature.within.the.
AdderView.CATxIP.1000..The.IP.access.control.feature.(configurable.by.a.global.
admin.user).allows.certain.network.address.ranges.to.be.denied.access.to.the.
AdderView.CATxIP.1000..If.set.incorrectly,.it.is.possible.to.exclude.all.network.
users.and.so.this.option.provides.an.emergency.recovery.point...
IP Address
This.is.the.identity.of.the.AdderView.CATxIP.1000.within.a.network..The.IP.
address.can.be.thought.of.as.the.telephone.number.of.the.AdderView.CATxIP.
1000..Unlike.the.MAC.address,.the.IP.address.can.be.altered.to.suit.the.network.
to.which.it.is.connected..It.can.either.be.entered.manually.or.configured.
automatically.using.the.DHCP.option..When.the.DHCP.option.is.enabled,.this.
ꢄꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial Configuration
This.page.allows.you.to.configure.the.
OPTIONS.serial.port.located.at.the.rear.of.the.
AdderView.CATxIP.1000.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Configuration’.and.press. ..
5. Select.‘Serial.Configuration’.&.press. ..
Options Port
Settings: Power Control, Sync Units
Determines.whether.the.RS232.serial.OPTIONS.port.at.the.rear.of.the.unit.
will.be.used.for.connection.to.power.control.switches.or.to.synchronise.the.
operation.of.two.AdderView.CATxIP.1000.units.....
Options Baud
Settings: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
This.option.determines.the.speed.of.the.RS232.serial.OPTIONS.port..The.other.
communication.settings.are.fixed.as:.No.parity,.8.bit.word,.1.stop.bit.
Note: When ‘Options Port’ is set to ‘Sync Units’, the baud rate will be
automatically changed to 19200..
ꢄꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Configuration
This.option.allows.you.to.completely.reset.
the.IP.portion.of.the.AdderView.CATxIP.
1000.unit..
WARNING: This process will remove all
network settings and return the unit to use
its original state. A complete reconfiguration
will be required before the IP features of the
unit can be used.
To get here
1. From.a.local.keyboard,.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.show.the.Main.Menu.
4. Select.‘Configuration’.and.press. ..
5. Select.‘Reset.Configuration’.and.press. ..
To reset the AdderView CATxIP ꢀ000 configuration
1. From.a.local.or.remote.(not.accessible.from.a.global.keyboard),.log.on.as.the.
‘admin’.user.
2. Press.
.
.(hotkeys.can.change).
.
3. Press. .to.select.‘More.menus’.
4. Select.‘Configuration’.
5. Select.‘Reset.Configuration’.
6. Highlight.the.‘Reset’.option.and.press.
.
7. After.a.short.period,.you.should.see.the.first.of.five.initial.configuration.
ꢅ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 2 - Configuration pages via viewer
This.section.covers.the.configuration.pages.that.are.available.to.global.admin.
users,.using.either.the.VNC.viewer.or.the.browser.methods.of.access.
To access the remote configuration pages
AdderView.CATxIP.1000.unit.and.login.as.
the.admin.user..
2. Once.logged.in,.click.the.Configure.button.
in.the.top.right.corner.of.the.window..
Main configuration page
Logged on users
Indicates.the.current.users.
irrespective.of.whether.they.
are.connected.locally.or.via.a.
network...
Click.the.required.option
ꢅꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User accounts
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
This.page.allows.you.to.manage.up.to.sixteen.separate.accounts..
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘User.Accounts’.option.
The.first.of.the.sixteen.accounts.is.the.admin.account.and.is.the.only.account.
with.access.rights.to.the.configuration.menus..The.user.name.and.access.rights.
are.fixed.for.the.admin.account,.the.only.change.possible.for.this.account.is.the.
password.
There.are.fifteen.user.account.positions..
User Name
All.user.names.must.consist.of.lower.case.characters.or.numbers.only..No.
symbols.or.upper.case.characters.are.permissible..The.user.name.can.be.
between.1.and.16.characters.in.length.
Password
Passwords.are.case.sensitive.and.can.include.certain.keyboard.symbols..The.
password.can.be.between.1.and.16.characters.in.length..It.is.important.to.note,.
however,.that.the.password.background.remains.shaded.in.amber.while.the.
AdderView.CATxIP.1000.considers.your.entered.password.to.be.too.easy.to.
guess..A.suitable.password.is.best.constructed.using.a.mixture.of.more.than.6.
letters,.numbers.and.punctuation.characters.
Confirm Pwd
Re-enter.your.password.here.to.confirm.that.it.is.correct.
Local
When.ticked,.the.selected.user.can.gain.access.using.the.local.KVM.console.
directly.connected.to.the.AdderView.CATxIP.1000.unit.
Remote
When.ticked,.the.selected.user.can.gain.access.via.an.IP.network.link,.such.as.a.
local.intranet.or.the.wider.Internet.(depending.on.how.the.AdderView.CATxIP.
1000.is.connected).
Power
To create a new user account
When.ticked,.the.selected.user.will.be.permitted.to.control.the.power.input.to.
host.systems.(requires.optional.power.control.switch.unit(s).to.be.fitted).
1..Enter.the.required.User.Name.to.activate.that.position.(the.Password.and.
access.tick.box.positions.will.become.editable).
2..Optionally.enter.a.password.for.the.user.account.
3..Tick/untick.the.Local,.Remote.and.Power.options.that.are.appropriate.to.the.
user.
4. Click.the.Save.button.to.register.your.changes..
ꢅꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit configuration
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
This.page.provides.access.to.a.selection.of.both.basic.and.advanced.settings.
for.the.AdderView.CATxIP.1000..Many.of.the.settings.displayed.here.are.also.
accessible.through.the.on-screen.menu.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Unit.Configuration’.option.
Hardware Version
Unit Name
Indicates.the.version.of.the.electronic.circuitry.within.the.AdderView.CATxIP.
The.name.entered.here.will.be.displayed.on.the.local.menus.and.the.remote.
1000.unit.
VNC.viewer/browser.windows.
Firmware Version
Menu Bar Toggle Hot Key
Indicates.the.version.of.the.internal.software.within.the.AdderView.CATxIP.1000.
Determines.the.function.key.that.can.be.used.to.display/hide.the.menu.bar.
within.the.VNC.screen.
Host Keyboard Layout
Encryption
Use.the.arrow.buttons.to.match.the.keyboard.layout.expected.by.the.host.
system.
Three.options.are.available:.Always.on,.prefer.off,.prefer.on..The.one.to.choose.
details..The.use.of.encryption.imposes.a.slight.performance.overhead.of.roughly.10%.
but.is.highly.secure.against.third.party.intrusion.
Admin Password
Enter.the.password.that.will.be.used.to.gain.administrator.access.to.the.
AdderView.CATxIP.1000..There.can.only.be.one.admin.user.and.only.that.user.is.
given.access.to.the.configuration.menus.
ꢅꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced unit configuration
Click.this.button.to.display.advanced.options.that.do.not.normally.require.alteration.
Mouse Latency Allowance
This.option.is.used.during.calibration.to.account.for.latency.delays.(caused.
as.signals.pass.through.a.device).introduced.by.some.KVM.switches.from.
alternative.manufacturers..
During.calibration,.the.AdderView.CATxIP.1000.waits.for.40ms.after.each.mouse.
movement.before.sampling.the.next..If.a.KVM.device.adds.a.significant.delay.to.
the.flow.of.data,.the.calibration.process.can.be.lengthened.or.may.fail.entirely..The.
value.entered.here.is.added.to.(or.subtracted.from).the.default.40ms.sampling.time.
Note: You can enter negative values (down to -40) in order to speed up the
calibration process when using fast KVM switches. Use this option with caution
as it can adversely affect the calibration process.
Mouse Rate
Defines.the.rate.at.which.mouse.movement.data.are.transmitted.to.the.system..The.
default.option.is.20ms,.which.equates.to.50.mouse.events.per.second..This.default.
rate.can.prove.too.fast.when.passed.through.certain.connected.KVM.switches.from.
alternative.manufacturers..In.such.cases,.data.are.discarded.causing.the.local.and.
remote.mouse.pointers.to.drift.apart..If.this.effect.is.encountered,.increase.the.mouse.
rate.to.around.30ms.(data.are.then.sent.at.a.slower.rate.of.33.times.per.second).....
Background Refresh Rate
Use.the.arrow.keys.to.alter.the.refresh.rate.for.screen.images.via.remote.links..This.
allows.you.to.tailor.the.screen.refresh.to.suit.the.network.or.modem.connection.
speeds..The.options.are:.Slow,.Medium,.Fast.or.Disabled..When.the.disabled.
option.is.selected,.the.remote.users.will.need.to.manually.refresh.the.screen.
Note: When a low connection speed is detected, the background refresh is
automatically disabled, regardless of the settings of this option.
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
Single Mouse Mode Mouse Switch
Allows.you.to.select.the.mouse.button.combination.that.can.be.used.to.exit.from.
single.mouse.mode.(when.active)..
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Unit.Configuration’.option.
4. Click.the.‘Advanced.Unit.Configuration’.option.
Behaviour for admin connections when limit reached
Force VNC Protocol ꢂ.ꢂ
IMPORTANT:.The.use.of.this.option.is.not.recommended..Protocol.3.3.is.a.legacy.
version.that.does.not.offer.any.encryption.
Determines.what.should.occur.when.four.global.connections.already.exist.and.
a.fifth,.administrator.connection.attempt.is.made..Options.are:.Replace oldest
connection,.Replace newest connection.and.Don’t replace..Only.non-administrator.
connections.can.be.terminated.in.this.way.
Idle Timeout
Determines.the.period.of.inactivity.on.a.global.connection.before.the.user.is.logged.
out..The.idle.timeout.period.can.be.set.to.any.time.span,.expressed.in.minutes..
Use VESA GTF
When.ticked,.the.VESA.Generalized.Timing.Formula.will.be.used.to.help.
for.a.list.of.all.supported.video.modes.
Protocol Timeout
Sets.the.time.period.by.which.responses.should.have.been.received.to.outgoing.
data.packets..If.the.stated.period.is.exceeded,.then.a.connection.is.considered.
lost.and.terminated.
Upgrade firmware
ꢅꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Time & date configuration
This.page.allows.you.to.configure.all.aspects.relating.to.time.and.date.within.the.
Timezone specifier
AdderView.CATxIP.1000.unit.
Optionally.enter.a.recognised.timezone.specifier.related.to.the.current.position.
of.the.AdderView.CATxIP.1000.unit..When.an.NTP.server.is.used,.the.specifier.
will.be.used.to.provide.the.correct.real.time.
The.timezone.specifier.takes.the.following.form:.
.....std.offset.dst.[offset],start[/time],end[/time]
The.std.and.offset.specify.the.standard.time.zone,.such.as.GMT.and.0,.or.CET.
and.-1,.or.EST.and.5,.respectively..
The.dst.string.and.[offset].specify.the.name.and.offset.for.the.corresponding.
Daylight.Saving.Time.zone;.if.the.offset.is.omitted,.it.defaults.to.one.hour.ahead.
of.standard.time..
The.remainder.of.the.specification.describes.when.Daylight.Saving.Time.is.in.
effect..The.start.field.is.when.Daylight.Saving.Time.goes.into.effect.and.the.
end.field.is.when.the.change.is.made.back.to.standard.time..The.most.common.
format.used.for.the.daylight.saving.time.is:.Mm.w.d.
Where:.m specifies the month.and.must.be.between.1.and.12..The.day.d.
must.be.between.0.(Sunday).and.6..The.week.w.must.be.between.1.and.5;.
week.1.is.the.first.week.in.which.day.d.occurs,.and.week.5.specifies.the.last.d.
day.in.the.month..
The.time.fields.specify.when,.in.the.local.time.currently.in.effect,.the.change.to.
the.other.time.occurs..If.omitted,.the.default.is.02:00:00..
Typical.examples.are:
UK:.. .
.
.
.
.
.
GMT0BST,M3.5.0/1,M10.5.0/2
CET-1CEST,M3.5.0/2,M10.5.0/3
EST5EDT,M3.2.0/2,M11.1.0/2
PST5PDT,M3.2.0/2,M11.1.0/2
Time and Date
Use.the.arrow.buttons.to.set.the.correct.current.time.
Central.Europe:...
US.Eastern:..
US.Pacific:..
.
.
Use NTP
When.this.option.is.selected,.the.AdderView.CATxIP.1000.will.synchronise.its.
internal.clocks.using.information.from.the.(Network.Time.Protocol).server.listed.
in.the.NTP Server IP address.field..
For further details
•. For.details.of.timezone.specifier.formats,.please.refer.to:.
NTP Server IP address
Optionally.enter.the.IP.address.for.a.known.Network.Time.Protocol.server...
•. For.details.of.the.Network.Time.Protocol.(main.RFC.number:.1305;.the.SNTP.
subset.used.as.the.basis.for.the.AdderView.CATxIP.1000:.4330).
Set Time from NTP Server
.
Click.to.immediately.use.the.time.and.date.information.from.the.listed.NTP.server..
ꢅꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Network configuration
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
This.page.allows.you.to.configure.the.various.aspects.of.the.IP.port.and.its.
relationship.with.the.local.network.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Network.Configuration’.option.
IP Address
address.can.be.thought.of.as.the.telephone.number.of.the.AdderView.CATxIP.
1000..Unlike.the.MAC.address,.the.IP.address.can.be.altered.to.suit.the.network.
to.which.it.is.connected..It.can.either.be.entered.manually.or.configured.
automatically.using.the.DHCP.option..When.the.DHCP.option.is.enabled,.this.
entry.is.greyed.out.
IP Network Mask
to.help.define.a.smaller.collection.(or.subnet).of.devices.on.a.network..In.this.
way.a.distinction.is.made.between.locally.connected.devices.and.ones.that.are.
reachable.elsewhere,.such.as.on.the.wider.Internet..This.process.helps.to.reduce.
overall.traffic.on.the.network.and.hence.speed.up.connections.in.general.
IP Gateway
This.is.the.address.of.the.device.that.links.the.local.network.(to.which.the.
AdderView.CATxIP.1000.is.connected).to.another.network.such.as.the.wider.
Internet..Usually.the.actual.gateway.is.a.network.switch.or.router.and.it.will.be.
used.whenever.a.required.address.lies.outside.the.current.network...
VNC Port
MAC address
This.is.the.logical.link.through.which.communications.with.a.remote.VNC.viewer.
a.widely.recognised.port.number.for.use.by.VNC.software..However,.in.certain.
circumstances.it.may.be.advantageous.to.alter.this.number.-.see.‘Security.issues.
with.ports’.for.more.details...
Media.Access.Control.address.–.this.is.the.unique.and.unchangeable.code.that.
was.hard.coded.within.your.AdderView.CATxIP.1000.unit.when.it.was.built..It.
consists.of.six.2-digit.hexadecimal.(base.16).numbers.separated.by.colons..A.
section.of.the.MAC.address.identifies.the.manufacturer,.while.the.remainder.is.
effectively.the.unique.electronic.serial.number.of.your.particular.unit...
HTTP Port
Use DHCP
This.is.the.logical.link.through.which.communications.with.a.remote.web.
established.standard.for.web.(HTTP.–.HyperText.Transfer.Protocol).traffic.though.
this.can.be.changed.to.suit.your.local.network.requirements.
DHCP.is.an.acronym.for.‘Dynamic.Host.Configuration.Protocol’..Its.function.is.
particularly.useful.when.connecting.to.medium.size.or.larger.networks,.such.
as.the.Internet..When.this.option.is.selected,.your.AdderView.CATxIP.1000.will.
attempt.to.locate.a.DHCP.server.on.the.network..If.such.a.server.is.located,.it.
will.supply.three.things.to.the.AdderView.CATxIP.1000:.an.IP.address,.an.IP.
network.mask.(also.known.as.a.Subnet.mask).and.a.Gateway.address..These.
are.not.usually.granted.permanently,.but.on.a.‘lease’.basis.for.a.fixed.amount.
of.time.or.for.as.long.as.the.AdderView.CATxIP.1000.remains.connected.and.
IP Access Control
This.section.allows.you.to.optionally.specify.ranges.of.addresses.which.will.or.
won’t.be.granted.access.to.the.AdderView.CATxIP.1000..If.this.option.is.left.
unchanged,.then.the.default.entry.of.‘+0.0.0.0/0.0.0.0’.ensures.that.access.from.
ꢅꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting IP access control
The.golden.rule.with.this.feature.is.‘Include.before.you.exclude’.or.to.put.it.
another.way.‘Arrange.allowed.addresses.in.the.list.before.the.denied.addresses’..
To define a new IP access control entry
1. Click.the.Add.button.to.display.a.popup.dialog:
This.is.because.the.positions.of.entries.in.the.list.are.vitally.important..Once.a.
range.of.addresses.is.denied.access,.it.is.not.possible.to.make.exceptions.for.
particular.addresses.within.that.range..For.instance,.if.the.range.of.addresses.
from.A.to.F.are.denied.access.first,.then.the.address.C.could.not.be.granted.
access.lower.down.the.list..Address.C.needs.to.be.placed.in.the.list.before.the.
denied.range.
IMPORTANT: This feature should be configured with extreme caution as it is
possible to deny access to everyone. If such an error occurs, see Clearing IP
access control for details about how to regain access.
Network/Address
Mask
Access
Enter.the.network.address.
that.is.to.be.allowed.or.denied.
access..If.a.range.of.addresses.
is.being.specified.then.specify.
any.one.of.the.addresses.
within.the.range.and.use.the.
Mask.entry.to.indicate.the.size.
of.the.range.
Enter.an.IP.network.mask.
that.indicates.the.range.of.
addresses.that.are.to.be.
allowed.or.denied.access..
For.instance,.if.only.a.single.
specified.IP.address.were.to.be.
required,.the.mask.entry.would.
be.255.255.255.255.in.order.
to.specify.a.single.location..See.
Use.the.arrow.buttons.to.
select.either.‘Allow’.or.
‘Deny’.as.appropriate.
In.the.list,.access.control.addresses.prefixed.by.‘+’.are.allow.entries.while.those.
prefixed.by.‘–.‘.are.deny.entries.
access.setting.
3. Click.the.OK.button.
To reorder access control entries
IMPORTANT: When reordering, ensure that any specific allowed addresses are
listed higher in the list than any denied addresses. Take care not to invoke any
deny access settings that would exclude valid users.
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Network.Configuration’.option.
1. In.the.access.control.list,.click.on.the.entry.to.be.moved.
2. Click.the.Up.or.Down.buttons.as.appropriate.
To edit/remove access control entries
1. In.the.access.control.list,.click.on.the.appropriate.entry.
2. Click.either.the.Edit.or.Remove.button.as.appropriate.
ꢅꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial port configuration
This.page.provides.all.access.to.settings.concerned.with.the.two.serial.ports.
(modem.and.power.control).that.are.situated.at.the.rear.of.the.AdderView.
CATxIP.1000.unit..
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Serial.Port.Configuration’.option.
Options Port Use
This.option.determines.whether.the.RS232.serial.OPTIONS.port.at.the.rear.of.the.
unit.will.be.used.for.connection.to.power.control.switches.or.to.synchronise.the.
operation.of.two.AdderView.CATxIP.1000.units..
Baud Rate
This.option.determines.the.speed.of.the.RS232.serial.OPTIONS.port..The.other.
communication.settings.are.fixed.as:.No.parity,.8.bit.word,.1.stop.bit.
ꢅꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Host configuration
This.page.provides.the.opportunity.to.configure.various.details.for.each.of.the.
host.systems.that.may.be.connected.to.the.AdderView.CATxIP.1000..Each.entry.
can.be.configured.with.a.name,.the.permitted.users,.the.hot.key.combinations.
required.to.switch.to.it.and,.if.required,.appropriate.power.control.commands.
To create a new host entry
1. Click.one.of.the.host.entries.to.reveal.a.Host.configuration.dialog..
. Note: Host computers connected to a cascaded AdderView unit will appear
within the list (providing the ‘Add entry for unrecognised host’ option is
ticked) and you can easily discern them from directly connected systems
because their addresses will be four digits, rather than two...
Name
. Enter.the.name.that.will.be.displayed.in.the.viewer.window.when.you.
click.the.Host.button.
Users
. Select.the.users.that.will.be.permitted.to.connect.to.this.host..Either.
enter. .to.allow.all.users.or.a.list.of.users.separated.by.commas.(e.g..
*
admin,.nigel,.preben,.steve).
Hotkey / KVM Port
. Declare.the.numeric.sequence.that.is.pressed.together.with.the.hotkeys.
(usually.Ctrl.+.Alt).to.select.this.host.system,.which.is.the.same.value.as.
the.KVM.port.number..
Power On
Add entry for unrecognised host
. Enter.the.code.required.to.make.an.attached.power.control.unit.apply.
details..
. When.selected,.any.systems.visited.that.are.not.specified.in.the.Hosts.list,.will.
be.added.to.the.list..It.is.useful.to.tick.this.option.when.cascaded.systems.are.
first.added.to.the.installation.
Power Off
Erase Host Configuration
. Enter.the.code.required.to.make.an.attached.power.control.unit.remove.
details.
. Removes.all.hosts.from.the.list..
To get here
2. Enter.the.required.information.in.each.field.
3. Click.the.OK.button.
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Host.Configuration’.option.
ꢅꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Logging and status
This.screen.provides.various.details.about.the.user.activity.on.the.AdderView.
To copy and paste the log
CATxIP.1000.unit..
You.can.copy.the.information.listed.within.the.log.and.paste.it.into.another.
application.
Date and
time the
event
Type of event, user name and access
method or remote IP address
1. While.viewing.the.log.screen,.press.Ctrl.and.C,.to.copy.the.data.into.the.
clipboard.
occurred
2. In.a.text.application.(i.e..Word,.WordPad,.Notepad).press.Ctrl.and.V,.or.right.
mouse.click.and.‘Paste’...
Syslog Server IP Address
Logging.information.can.optionally.be.sent,.as.it.occurs,.to.a.separate.system.
using.the.standard.Syslog.protocol..Enter.the.IP.address.of.a.suitable.system.in.
the.field.provided.
For further details
•. For.details.of.the.Syslog.protocol.(RFC.number:.3164).
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘Logging.and.Status’.option.
Click to clear
all log entries
Click to
refresh
the list
Optionally enter an
IP address to which
the status log should
be sent
Click to
return to
the main
menu
ꢆ0
Download from Www.Somanuals.com. All Manuals Search And Download.
LDAP configuration
The.AdderView.CATxIP.1000.can.optionally.use.the.industry.standard.LDAP.
(Lightweight.Directory.Access.Protocol).to.allow.user.authentication.to.occur.
in.conjunction.with.an.externally.held.database..This.screen.allows.you.to.
configure.details.related.to.the.creation.of.an.LDAP.link.to.an.external.directory.
service,.such.as.an.Active.Directory.server.
Use LDAP
Tick.this.option.to.enable.the.Lightweight.Directory.Access.Protocol.features.of.
the.unit.
Host Address
Enter.the.IP.address.of.the.LDAP.server.that.holds.the.required.directory.service.
Host Port
The.standard.port.address.for.LDAP.links.is.389.and.this.should.not.need.to.be.
changed.unless.special.circumstances.exist.
Base DN
This.field.allows.you.to.enter.a.Distinguished.Name.for.the.unit.which.will.be.
used.as.the.main.identifier.during.(non-anonymous.bind).LDAP.sessions..An.
example.Base.DN.value.might.be:.“dc=catxip1000,dc=com”.
User field
Enter.the.LDAP.database.field.that.will.be.used.to.match.each.user.name.
against..The.details.entered.here.will.depend.on.the.specific.LDAP.database.
being.used.-.‘uid’.or.‘cn’.are.commonly.used.values...
Anonymous Bind
If.left.unchecked.then.bind.requests.are.sent.with.username.(Base.DN).and.
password.(more.suitable.for.Active.Directory.applications).
If.checked,.bind.requests.are.anonymous.(more.suitable.for.Linux.LDAP.
implementations).
To get here
1. Using.VNC.viewer.or.a.browser,.log.on.as.the.‘admin’.user.
2. Click.the.‘Configure’.button.in.the.top.right.corner.
3. Click.the.‘LDAP.Configuration’.option.
ꢆꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 3 - VNC viewer connection options
When.you.are.connecting.to.the.
AdderView.CATxIP.1000.using.
the.VNC.viewer,.a.number.of.
options.are.available..
Colour/Encoding
Auto select
When.ticked,.this.option.will.
examine.the.speed.of.your.
connection.to.the.AdderView.
CATxIP.1000.and.apply.the.most.
suitable.encoding.method..This.
option.is.suggested.for.the.majority.
of.installations.
Click here to
access the options
There.are.six.tabbed.pages.of.options:
•. Colour/Encoding
•. Inputs
Preferred encoding
There.are.three.manually.selectable.
encoding.methods.which.are.
accessible.when.the.Auto.select.
option.is.unticked..
•. Scaling
•. Misc
•. Identities
•. ZRLE.–.This.is.a.highly.
compressed.method.that.is.
best.suited.to.slow.modem.
connections.
•. Load/Save
•. Hextile.–.This.method.offers.
better.performance.than.the.ZRLE.when.used.over.a.high.speed.network.
because.there.is.no.need.for.the.AdderView.CATxIP.1000.to.spend.time.
highly.compressing.the.data.
•. Raw.–.This.is.a.primitive,.uncompressed.method.that.is.mainly.used.for.
technical.support.issues..You.are.recommended.not.to.use.this.method..
Colour level
This.section.allows.you.to.select.the.most.appropriate.colour.level.for.the.speed.
of.the.connection.to.the.AdderView.CATxIP.1000..Where.the.connection.speed.
is.slow.or.inconsistent.there.will.be.a.necessary.compromise.between.screen.
response.and.colour.depth.
•. Full.–.This.mode.is.suitable.only.for.fast.network.connections.and.will.pass.
on.the.maximum.colour.depth.being.used.by.the.host.system.
•. Medium (ꢁꢄꢅ colours).–.This.mode.reduces.the.host.system.output.
to.a.256.colour.mode.and.is.more.suitable.for.ISDN.and.fast.modem.
connections.
•. Low (ꢅꢃ colours).–.This.mode.is.suitable.for.slower.modem.connections.
and.reduces.the.host.system.output.to.64.colours..
IMPORTANT:.If.you.make.any.changes.to.the.options.given.here.and.wish.to.
retain.them.for.successive.connection.sessions,.you.must.save.the.changes...
To.do.this,.change.to.the.‘Load/Save’.tab.and.click.the.‘Save’.button.within.the.
‘Default’.section..
•. Very low (ꢇ colours).–.This.mode.provides.very.rudimentary.picture.
quality.and.hardly.any.speed.advantage.over.the.64.colour.setting..You.are.
recommended.not.to.use.this.mode....
ꢆꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs
Rate-limit mouse move events
Enable all inputs
When.ticked,.this.feature.reduces.the.mouse.movement.information.that.is.
sent.to.the.AdderView.CATxIP.1000.and.host.system..This.is.useful.for.slow.
connections.and.you.will.notice.that.the.remote.cursor.will.catch.up.with.the.
local.cursor.roughly.once.every.second.
When.selected,.allows.keyboard,.
mouse.and.clipboard.data.to.be.
transferred.between.server.and.
viewer.systems.
Enable 3-button mouse emulation
Disable all inputs (view-only
mode)
When.selected,.prevents.control.
data.being.passed.between.server.
and.viewer..Viewer.can.display.the.
server.output,.but.cannot.control.it.
This.feature.allows.you.to.use.a.2-button.mouse.to.emulate.the.middle.button.
of.a.3-button.mouse..When.enabled,.press.the.left.and.right.mouse.buttons.
simultaneously.to.create.a.middle.button.action..You.are.advised.to.generally.
use.a.3-button.mouse.
Pass special keys directly to server
When.ticked,.‘special’.keys.(the.Windows.key,.the.Print.Screen.key,.Alt+Tab,.
Alt+Escape.and.Ctrl+Escape).are.passed.directly.to.the.AdderView.CATxIP.1000.
rather.than.being.interpreted.locally..
Customise
Allows.you.to.select.which.data.can.
be.transferred.between.server.and.
viewer.
Menu key
This.feature.allows.you.to.select.which.function.key.is.used.to.display.the.VNC.
viewer.options.menu..The.menu.key.is.only.way.to.exit.from.the.full.screen.
viewer.mode...
Send pointer events to server
When.un-ticked,.the.VNC.viewer.
will.not.send.mouse.movement.or.
click.data.to.the.AdderView.CATxIP.
1000.or.host.system.
Send keyboard events to server
When.un-ticked,.the.VNC.viewer.will.not.send.keyboard.information.to.the.
AdderView.CATxIP.1000.or.host.system.
Send clipboard changes to server
This.feature.is.restricted.to.software.server.versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
IMPORTANT:.If.you.make.any.changes.to.the.options.given.here.and.wish.to.
retain.them.for.successive.connection.sessions,.you.must.save.the.changes...
To.do.this,.change.to.the.‘Load/Save’.tab.and.click.the.‘Save’.button.within.the.
‘Default’.section..
Accept clipboard changes from server
This.feature.is.restricted.to.software.server.versions.of.VNC.and.has.no.effect.
on.AdderView.CATxIP.1000.installations,.except.for.retrieving.the.activity.log.as.
described.in.the.logging.and.status.section.
ꢆꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Misc
Only use protocol version ꢂ.ꢂ
Shared connection (do not dis-
This.option.does.not.apply.to.AdderView.CATxIP.1000.connections.
connect other viewers)
This.option.does.not.apply.
to.AdderView.CATxIP.1000.
connections.
Beep when requested to by the server
When.ticked,.your.local.system.will.beep.in.response.to.any.error.beeps.emitted.
by.the.AdderView.CATxIP.1000.
Full screen mode
Offer to automatically reconnect
When.ticked,.the.viewer.will.offer.to.restore.a.lost.connection.with.the.server.
When.ticked,.the.VNC.viewer.will.
launch.in.full.screen.mode..Use.the.
menu.key.(usually.F8).to.exit.from.
full.screen.mode.
Try Single Sign-On if server allows it
This.option.does.not.apply.to.AdderView.CATxIP.1000.connections.
Full screen mode matches server
resolution
When.ticked,.the.VNC.viewer.
will.attempt.to.use.the.screen.
resolution.of.the.selected.host.
system..
Enable file transfer
When.ticked,.the.VNC.viewer.will.allow.file.transfers.between.the.IP.connected.
viewer.system.and.the.selected.host.system.
Enable sound
When.ticked,.the.VNC.viewer.will.play.sounds.from.the.host.system..
Full screen mode uses all moni-
tors
When.ticked,.the.VNC.viewer.will.
Only play sound when window active
When.ticked,.the.VNC.viewer.will.only.play.sounds.from.the.host.system.when.
the.VNC.window.is.active.
show.the.screen.image.using.all.available.display.monitors.on.multiple.display.
systems..
Render cursor locally
This.option.does.not.currently.apply.to.AdderView.CATxIP.1000.connections..
Allow dynamic desktop resizing
When.ticked,.the.viewer.window.will.be.automatically.resized.whenever.the.
host.system’s.screen.resolution.is.altered..
IMPORTANT:.If.you.make.any.changes.to.the.options.given.here.and.wish.to.
retain.them.for.successive.connection.sessions,.you.must.save.the.changes...
To.do.this,.change.to.the.‘Load/Save’.tab.and.click.the.‘Save’.button.within.the.
‘Default’.section..
ꢆꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Scaling
No Scaling
No.attempt.is.made.to.make.the.
screen.image.fit.the.viewer.window..
You.may.need.to.scroll.horizontally.
and/or.vertically.to.view.all.parts.of.
the.screen.image.
Scale to Window Size
Adjusts.the.server.screen.image.to.
suit.the.size.of.the.viewer.window.
Custom Size
Adjusts.the.server.screen.image.
according.to.the.Width.and.Height.
settings.in.the.adjacent.fields..A.drop.
box.to.the.right.of.the.fields.allows.
you.to.define.the.image.size.by.
percentage.or.by.pixels,.as.required.
Preserve Aspect Ratio
When.ticked,.maintains.a.consistent.
ratio.between.the.horizontal.and.
vertical.dimensions.of.the.screen.
image.
IMPORTANT:.If.you.make.any.changes.to.the.options.given.here.and.wish.to.
retain.them.for.successive.connection.sessions,.you.must.save.the.changes...
To.do.this,.change.to.the.‘Load/Save’.tab.and.click.the.‘Save’.button.within.the.
‘Default’.section..
ꢆꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Identities
Load / Save
This.feature.helps.your.VNC.
Configuration File - Reload
viewer.to.confirm.that.a.revisited.
AdderView.CATxIP.1000.is.
genuine.and.not.another.device.
masquerading.as.an.AdderView.
CATxIP.1000..The.list.given.will.
retain.the.identities.of.all.visited.
units.(that.have.full.security.
enabled)..
Allows.you.to.load.a.configuration.
file.saved.from.this,.or.another.
viewer.
Configuration File - Save
Allows.you.to.save.the.current.
settings.so.that.they.can.be.copied.
from.one.viewer.to.another.
When.you.first.make.a.secure.
connection.to.the.AdderView.
CATxIP.1000,.the.security.
Configuration File - Save As...
Allows.you.to.save.the.current.
settings.under.a.new.name.so.that.
they.can.be.copied.from.one.viewer.
to.another.
information.for.that.AdderView.
CATxIP.1000.unit.is.cached.within.
this.Identities.tab.(i.e..the.“identity”.
is.known)..The.next.time.that.you.
connect.to.the.AdderView.CATxIP.
1000,.its.identity.is.checked.against.
the.stored.version..If.a.mismatch.
is.found.between.the.current.and.the.stored.identities.then.a.warning.will.be.
issued.to.you.
Defaults - Reload
When.clicked,.all.connection.
options.are.returned.to.the.default.
settings.that.are.currently.saved.
Defaults - Save
When.clicked,.saves.the.current.connection.options.as.the.default.set.that.will.
be.used.in.all.subsequent.VNC.connections..
If.an.existing.AdderView.CATxIP.1000.is.fully.reconfigured.then.it.will.need.
to.issued.with.a.new.identity..In.this.case.the.previous.identity,.listed.in.this.
tab,.should.be.removed.so.that.a.new.identity.can.be.created.on.the.next.
connection....
ꢆꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 4 - VNC viewer window options
Click.the.VNC.icon.in.the.top.left.corner.of.the.viewer.window.(or.press.F8).to.
display.the.window.options:.
Standard window control items
Full screen
Expands.the.VNC.viewer.window.to.fill.the.whole.screen.
with.no.visible.window.edges.or.toolbar..Press.F8.to.re-
display.this.menu.
Single mouse mode (P)
Used.for.fast.network.connections.where.a.second,.
“predictor”.cursor.is.not.required.
Ctrl, Alt, Send Fꢇ, Send Ctrl-Alt-Del
Sends.the.selected.keypress(es).to.the.AdderView.CATxIP.
1000.and.host.computer..This.is.necessary.because.certain.
keys.and.key.combinations.are.trapped.by.the.VNC.viewer.
Refresh Screen
Requests.data.from.the.server.for.a.complete.redraw.of.
the.screen.image,.not.just.the.items.that.change.
New connection...
Displays.the.connection.dialog.so.that.you.can.log.on.to.a.
different.AdderView.CATxIP.1000.or.VNC.server.location.
Options...
Displays.the.full.range.of.connection.options.-.see.
Connection info...
Displays.various.connection.and.display.details.
About...
Displays.information.about.your.VNC.viewer....
ꢆꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs
Appendix 5 - Browser viewer options
When.you.are.connecting.to.
the.AdderView.CATxIP.1000.
using.a.Web.browser,.a.number.
of.options.are.available..
View only (ignore mouse & keyboard)
When.ticked,.the.viewer.will.not.send.keyboard.
or.mouse.information.to.the.AdderView.CATxIP.
1000.or.host.computer.
Accept clipboard from server
Click here to
access the options
This.feature.is.restricted.to.software.server.
versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
There.are.four.options.pages:
Send clipboard to server
This.feature.is.restricted.to.software.server.versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
Encoding and colour level
Auto select
When.ticked,.this.option.will.examine.the.speed.
of.your.connection.to.the.AdderView.CATxIP.
1000.and.apply.the.most.suitable.encoding.
method..This.option.is.suggested.for.the.
majority.of.installations.
Security
ꢄꢀꢁ bits (low security)
Selects.the.lowest.level.of.encoding.for.
communications.between.the.browser.and.the.
AdderView.CATxIP.1000.
Preferred encoding
ꢀ0ꢁꢃ bits (medium security)
There.are.three.manually.selectable.encoding.
methods.which.are.accessible.when.the.Auto.
select.option.is.unticked..
Selects.the.middle.level.of.encoding.for.
communications.between.the.browser.and.the.
AdderView.CATxIP.1000.
•. ZRLE.–.This.is.a.highly.compressed.method.that.is.best.suited.to.slow.
modem.connections.
ꢁ0ꢃꢇ bits (high security)
•. Hextile.–.This.method.offers.better.performance.than.the.ZRLE.when.used.
over.a.high.speed.network.because.there.is.no.need.for.the.AdderView.
CATxIP.1000.to.spend.time.highly.compressing.the.data.
Selects.the.highest.level.of.encoding.for.communications.between.the.browser.
and.the.AdderView.CATxIP.1000.
Misc
•. Raw.–.This.is.a.primitive,.uncompressed.method.that.is.mainly.used.for.
technical.support.issues..You.are.recommended.not.to.use.this.method..
Shared (don’t disconnect other viewers)
This.feature.is.restricted.to.software.server.
versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
Colour level
The.colour.level.is.fixed.at.Medium.(256.colours).for.almost.all.browsers.
Render cursor locally
This.feature.is.restricted.to.software.server.
versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
Fast CopyRect
This.feature.is.restricted.to.software.server.versions.of.VNC.and.has.no.effect.on.
AdderView.CATxIP.1000.installations.
ꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 6 – Addresses, masks and ports
Net masks
IP.address,.network.masks.and.ports.are.all.closely.linked.in.the.quest.for.one.
The.net.mask.(or.sub-net.mask).informs.a.device.as.to.its.own.position.within.a.
device.to.find.another.across.disparate.network.links.
network..From.this.it.can.determine.whether.any.other.device.is.within.the.same.
local.network.or.is.situated.further.afield.
IP addresses
Taking.the.telephone.number.analogy.given.in.the.IP.address.section,.in.order.
to.use.the.telephone.system.efficiently,.it.is.vital.for.you.to.know.your.location.
relative.to.the.person.you.are.calling..In.this.way.you.avoid.dialling.unnecessary.
numbers...
As.a.rough.analogy,.consider.how.you.use.the.telephone.system..The.phone.
number.for.Adder.Technology.in.the.UK.is.0044 (0)1954 780044..This.number.
consists.of.three.distinct.parts:
When.one.network.device.needs.to.talk.to.another,.the.first.thing.that.it.will.
do.is.a.quick.calculation.using.its.own.IP.address,.the.other.device’s.IP.address.
and.its.own.net.mask..Suppose.a.device.with.address.192.168.142.154.and.
net.mask.255.255.255.0 needed.to.communicate.with.a.device.at.address.
192.168.142.22..The.sending.device.would.perform.several.calculations:
•. 0044.connects.from.another.country.to.the.UK
•. (0)1954.selects.the.main.telephone.exchange.in.the.Bar.Hill.area.of.
Cambridgeshire,.and
•. 780044.is.the.unique.code.for.Adder.Technology.within.Bar.Hill.
The.important.parts.of.the.whole.number.depend.on.where.you.are..If.you.were.
based.in.the.same.local.area.as.Adder.Technology,.there.would.be.no.point.
in.dialling.out.of.the.UK,.or.even.out.of.the.area..The.only.part.of.the.whole.
number.that.you.are.interested.in.is.the.final.part:.780044.
1
Sending.
device.IP.
address
Destination.
device.IP.
address
192 168 142 154
192 168 142 000
192 168 142 22
192 168 142 000
In.a.similar.way.to.the.various.parts.of.the.telephone.number,.the.four.sections.
(or.Octets).of.every.IP.address.have.different.meanings.or.“weights”..Consider.
the.following.typical.IP.address:.
Net.mask
Result
3
2
192.168.142.154
192.is.the.most.global.part.of.the.number.(akin.to.the.0044.of.the.phone.
number).and.154.is.the.most.local.(similar.to.the.780044.unique.local.code.of.
the.phone.number)...
192.168.142.000..=..192.168.142.000.?...Answer:.Yes
4
Address
is local
When.two.network.devices.communicate.with.each.other,.they.always.“dial.the.
whole.number”.regardless.of.their.respective.locations.in.a.network..However,.
they.still.need.to.know.whether.the.other.device.is.local.to.them.or.not,.and.this.
is.where.the.net.mask.comes.into.play.
1.The.net.mask.is.used.to.determine.the.local.and.global.parts.of.the.sender’s.IP.
address..Where.there.is.255.in.the.mask,.the.corresponding.address.slips.through,.
where.there.is.a.0,.it.is.blocked.
2.Where.the.net.mask.was.0,.the.corresponding.part.of.the.result.is.also.zero.-.this.
section.is.now.known.to.be.the.local.part.of.the.IP.address.
3.The.same.process.is.carried.out.for.the.destination.address,.again.using.the.sender’s.
net.mask..Now.the.local.parts.of.both.addresses.have.been.equalised.to.zero,.because.
their.values.are.not.important.in.determining.whether.they.are.both.in.the.same.local.
network....
4.The.results.of.the.two.net.mask.operations.are.now.compared,.if.they.match,.the.
destination.is.local..If.not,.then.the.sender.will.still.use.the.same.full.destination.IP.
address.but.will.also.flag.the.message.to.go.via.the.local.network.gateway.and.out.
into.the.wider.world..
The.reason.for.doing.this?.It.makes.the.network,.as.a.whole,.much.more.
efficient..If.every.message.for.every.recipient.was.shoved.straight.out.onto.the.
Internet,.the.whole.thing.would.grind.to.a.halt.within.seconds..Net.masks.keep.
local.traffic.just.that.-.local.
ꢆꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Net masks - the binary explanation
To.really.understand.the.operation.of.a.net.mask.it.is.necessary.to.delve.deeper.
into.the.life.blood.of.computers.–.binary;.this.is.native.digital,.where.everything.
is.either.a.1.(one).or.0.(zero),.on.or.off,.yes.or.no..
AND.function’..The.example.of.255.255.255.0.is.handy.because.the.last.octet.
is.completely.zero.and.is.“clean”.for.illustrative.purposes..However,.actual.net.
mask.calculations.are.carried.out,.not.on.whole.decimal.numbers,.but.bit.by.bit.
on.binary.numbers,.hence.the.term.‘bit-wise’..In.a.real.local.network,.a.net.mask.
might.be.255.255.255.240..Such.an.example.would.no.longer.be.quite.so.clear,.
until.you.look.at.the.net.mask.in.its.binary.form:
. 11111111.11111111.11111111.11110000
In.this.case,.the.four.zeroes.at.the.end.of.the.net.mask.indicate.that.the.local.
part.of.the.address.is.formed.by.only.the.last.four.bits..If.you.use.the.diagram.
from.the.previous.example.and.insert.the.new.net.mask,.it.will.have.the.
following.effect.on.the.final.result:
Decimal octet prior to AND
operation with net mask
154
192 168 142 154
192 168 142 144
Binary equivalent of ꢀꢄꢃ
10011010
1
0
1
0
1
0
1
0
Inside a bit-wise AND function
When.you.“open.up”.the.last.octet.
of.the.net.mask.and.look.at.the.
binary.inside,.you.can.see.the.last.
four.zero.bits.preventing.any.1’s.in.
the.address.from.falling.through..
10010000
Binary octet after AND
operation with net mask
Decimal equivalent of ꢀ00ꢀ0000
144
Thus,.when.154.is.bit-wise ANDed.with.240,.the.result.is.144..Likewise,.any.
local.address.from.192.168.142.144.through.to.192.168.142.159.would.
produce.exactly.the.same.result.when.combined.with.this.net.mask,.hence.they.
would.all.be.local.addresses..However,.any.difference.in.the.upper.three.octets.
or.the.upper.four.bits.of.the.last.octet.would.slip.through.the.mask.and.the.
address.would.be.flagged.as.not.being.local.....
ꢇ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Calculating the mask for IP access control
The.permissible.mask.values.(for.all.octets).are.as.follows:.
The.IP.access.control.function.uses.a.standard.IP.address.and.a.net.mask.
notation.to.specify.both.single.locations.and.ranges.of.addresses..In.order.to.
use.this.function.correctly,.you.need.to.calculate.the.mask.so.that.it.accurately.
encompasses.the.required.address(es).
Mask octet
255
Binary
Number of addresses encompassed
1 address
11111111
11111110.
11111100.
11111000.
11110000.
11100000.
11000000.
10000000.
00000000.
254
2 addresses.
Single locations
252
4 addresses
Some.of.the.simplest.addresses.to.allow.or.deny.are.single.locations..In.this.case.
you.enter.the.required.IP.address.into.the.‘Network/Address’.field.and.simply.
enter.the.‘Mask’.as.255.255.255.255.(255 used throughout the mask means
that every bit of the address will be compared and so there can only be one
unique address to match the one stated in the ‘Network/Address’ field).
248
8 addresses
240
16 addresses
224
32 addresses
192
64 addresses
128
128 addresses
256 addresses
All locations
The.other.easy.setting.to.make.is.ALL.addresses,.using.the.mask.0.0.0.0..As.
standard,.the.IP.access.control.section.includes.the.entry:. 0.0.0.0/0.0.0.0
0
+
If.the.access.control.range.that.you.need.to.define.is.not.possible.using.one.
address.and.one.mask,.then.you.could.break.it.down.into.two.or.more.entries..
Each.of.these.entries.could.then.use.smaller.ranges.(of.differing.sizes).that,.
when.combined.with.the.other.entries,.cover.the.range.that.you.require.
The.purpose.of.this.entry.is.to.include.all.IP.addresses..It.is.possible.to.similarly.
exclude.all.addresses,.however,.take.great.care.not.to.do.this.as.you.instantly.
Address ranges
For.instance,.to.accurately.encompass.the.range.in.the.earlier.example:
Although.you.can.define.ranges.of.addresses,.due.to.the.way.that.the.mask.
operates,.there.are.certain.restrictions.on.the.particular.ranges.that.can.be.set..
For.any.given.address.you.can.encompass.neighbouring.addresses.in.blocks.of.
either.2,.4,.8,.16,.32,.64,.128,.etc..and.these.must.fall.on.particular.boundaries..
For.instance,.if.you.wanted.to.define.the.local.address.range:.
192.168.142.67 to 192.168.142.93.
You.would.need.to.define.the.following.six.address.and.mask.combinations.in.
the.IP.access.control.section:
Network/address entry Mask entry
192.168.142.67 to 192.168.142.93.
192.168.142.67
192.168.142.68
192.168.142.72
192.168.142.80
192.168.142.88
192.168.142.93
255.255.255.255
255.255.255.252
255.255.255.248
255.255.255.248
255.255.255.252
255.255.255.255
defines 1 address (.67)
The.closest.single.block.to.cover.the.range.would.be.the.32.addresses.from:.
192.168.142.64 to 192.168.142.95..
defines 4 addresses (.68 to .71)
defines 8 addresses (.72 to .79)
defines 8 addresses (.80 to .87)
defines 4 addresses (.88 to .92)
defines 1 address (.93)
The.mask.needed.to.accomplish.this.would.be:.255.255.255.224..
When.you.look.at.the.mask.in.binary,.the.picture.becomes.a.little.clearer..The.
above.mask.has.the.form:.11111111.11111111.11111111.11100000.
Ignoring.the.initial.three.octets,.the.final.six.zeroes.of.the.mask.would.ensure.
that.the.32.addresses.from..64.(01000000).to..95.(01011111).would.all.be.
details........
When.defining.a.mask,.the.important.rule.to.remember.is:
There must be no ‘ones’ to the right of a ‘zero’..
For.instance,.(ignoring.the.first.three.octets).you.could.not.use.a.mask.that.had.
11100110 because.this.would.affect.intermittent.addresses.within.a.range.in.an.
impractical.manner..The.same.rule.applies.across.the.octets..For.example,.if.you.
have.zeroes.in.the.third.octet,.then.all.of.the.fourth.octet.must.be.zeroes..
ꢇꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Ports
Security issues with ports
The.settings.of.port.numbers.become.important.when.the.AdderView.CATxIP.
1000.is.situated.behind.a.network.firewall..In.order.for.a.remote.VNC.viewer.or.
web.browser.to.make.contact.with.your.AdderView.CATxIP.1000,.it.is.necessary.
for.the.firewall.to.allow.communication.through.a.particular.numbered.port.to.
occur..
then.think.of.ports.as.extension.numbers..In.a.company.of.any.size,.you.
generally.wouldn’t.expect.the.accounts.department.to.share.the.same.telephone.
with.the.technical.department..Although.their.calls.may.all.be.related.to.the.
same.company,.they.concern.very.different.aspects.of.that.company..
One.specific.function.of.firewalls.is.to.restrict.access.to.ports.in.order.to.prevent.
malicious.attackers.using.them.as.a.route.into.your.network..Every.new.port.
that.is.opened.offers.a.new.possibility.for.hackers.and.so.the.number.of.
accessible.ports.is.purposefully.kept.to.a.minimum..In.such.cases,.it.may.be.
advantageous.to.change.one.or.both.AdderView.CATxIP.1000.ports.to.use.the.
same.number..The.other.alternative.is.to.place.the.AdderView.CATxIP.1000.unit.
outside.the.firewall.and.take.full.advantage.of.its.secure.operation.features.–.see.
It.is.the.same.with.IP.network.connections..Although.you.have.only.one.network.
link.into.your.computer.and.only.one.IP.address.(phone.number),.you.are.
probably.performing.many.different.tasks.through.that.one.link,.often.at.the.
same.time..Thus,.when.you.browse.the.web.your.outgoing.requests.and.the.
incoming.information.are.all.channelled.through.port.80..When.you.send.an.
email,.it.travels.through.port.25.and.when.you.transfer.files.you.are,.without.
knowing.it,.using.port.20.
At.the.“border.crossing”.between.the.wider.Internet.and.every.local.network.
attached.to.it,.there.is.a.router.that.is.usually.combined.with.a.firewall..One.of.
its.main.tasks.is.to.direct.incoming.traffic.to.the.correct.place.within.its.local.
network..A.key.piece.of.information.to.help.it.do.this.is.the.port.number:.
IMPORTANT: The correct configuration of routers and firewalls requires
advanced networking skills and intimate knowledge of the particular network.
Adder Technology cannot provide specific advice on how to configure your
network devices and strongly recommend that such tasks are carried out by a
User.with.VNC.viewer.accesses.
IP.address:.129.7.1.10.(this.
automatically.uses.port.5900)..
User.accesses.the.company.
website.at:.129.7.1.10.(this.
automatically.uses.port.80)..
Internet
Router/firewall address: ꢀꢁꢈ.ꢆ.ꢀ.ꢀ0
Router.is.programmed.to.send.port.5900.
VNC.traffic.to.local.address.192.168.0.3.
and.port.80.web.traffic.to.local.address.
192.168.0.42
.
LOC REM VNC 100 LNK PWR
Web server
Web.server.has.the.local.
IP.address:.192.168.0.42
AdderView.CATxIP.1000.
has.the.local.IP.address:.
192.168.0.3
ꢇꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 7 – Cable and connector specifications
Multi-head synchronisation cable
RS232 serial options port cable
ꢈpin D-type female
ꢈpin D-type male
MASTER end
SLAVE end
ꢈpin D-type male
ꢈpin D-type male
Use this cable when two
AdderView CATxIP ꢀ000
devices are being synchronised.
MASTER end
SLAVEꢀ end
ꢈpin D-type male
ꢈpin D-type male
Use this cable when three
AdderView CATxIP ꢀ000
devices are being synchronised.
AdderView CATxIP 1000 to power switch cable
ꢈpin D-type female
ꢃpin RJꢈ
SLAVEꢁ end
ꢈpin D-type male
Power switch to power switch daisy chain cable
ꢃpin RJꢈ
ꢃpin RJꢈ
ꢇꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 8 – Hotkey sequence codes
These.codes.are.used.when.defining.hotkey.switching.sequences.(macros).for.
host.computers.and.allow.you.to.include.almost.any.of.the.special.keys.on.the.
keyboard...
Permissible key presses
Creating macro sequences
Hot.key.macro.sequences.can.be.up.to.256.characters.long..All.keys.are.
assumed.to.be.released.at.the.end.of.a.line,.however,.you.can.also.determine.
that.a.key.is.pressed.and.released.within.a.sequence..Any.of.the.following.three.
examples.will.send.a.command.that.emulates.and.a.press.and.release.of.the.
Scroll.Lock.key:.
Main control keys (see ‘Using abbreviations’)
|
|
|
|
|
|
|
|
|
|
Backspace. .Tab. .Return. .Enter. .Ctrl. .Alt. .Win. .Shift. .LShift. .RShift..
|
|
|
|
|
|
|
|
LCtrl. .RCtrl. .LAlt. .AltGr. .RAlt. .LWin. .RWin. .Menu. .Escape. .Space.
|
|
|
CapsLock. .NumLock. .PrintScreen. .Scrolllock
+SCROLL-SCROLL.
+-SCROLL.
+SCROLL-
Math operand keys (see ‘Using abbreviations’)
|
|
Add.(Plus). .Subtract.(Minus). .Multiply
Central control keys (see ‘Using abbreviations’)
Example:
|
|
|
|
|
Insert. .Delete. .Home. .End. .PageUp. .PageDown
+-SCROLL+-SCROLL+1+ENTER
|
|
|
|
|
Up. .Down. .Left. .Right. .Print. .Pause
Press.and.release.scroll.twice,.press.1.then.enter.then.release.all.keys.(equivalent.
definition.is.+SCROLL-SCROLL+SCROLL-SCROLL+1+ENTER-1-ENTER)
Keypad keys (see ‘Using abbreviations’)
|
|
|
|
KP_Insert. .KP_Delete. .KP_Home. .KP_End. .KP_PageUp.
Using abbreviations
|
|
|
|
|
KP_PageDown. .KP_Up. .KP_Down. .KP_Left. .KP_Right. .KP_Enter
To.reduce.the.length.of.the.key.definitions,.any.unique.abbreviation.for.a.
key.can.be.used..For.example:.“scroll”,.“scr”.and.even.“sc”.all.provide.an.
identifiable.match.for.“ScrollLock”.whereas.“en”.could.not.be.used.because.it.
might.mean.“Enter”.or.“End”.(“ent”.would.be.suitable.for.“Enter”)..
|
|
|
KP_Add. .KP_Subtract. .KP_Divide. .KP_Multiply.
KP_0.to.KP_9
Note: Hotkey sequences and abbreviations are not case sensitive..
Function keys
|
|
|
|
|
|
|
|
|
|
|
F1. .F2. .F3. .F4. .F5. .F6. .F7. .F8. .F9. .F10. .F11. .F12
For.information.about.where.to.enter.these.codes,.please.see.the.section.
ASCII characters
All.characters.can.be.entered.using.their.ASCII.codes,.from.32.to.126.(i.e..A,B,C,.
….1,2,3.etc.).with.the.exception.of.the.special.characters.‘+’,.‘-’,.‘+–’.and.‘*’.
which.have.special.meanings,.as.explained.below.
Codes with special meanings
+.. means.press.down.the.key.that.follows
–.. means.release.the.key.that.follows
+–.means.press.down.and.release.the.key.that.follows
*.. means.wait.250ms.(note:.if.a.number.immediately.follows.the.asterisk,.then..
the.delay.will.equal.the.number,.in.milliseconds)
Note: Hotkey sequences are not case sensitive.
ꢇꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 9 – Supported video modes
The.following.video.modes.are.supported.and.can.be.automatically.configured.
by.the.AdderView.CATxIP.1000.units..If.a.recognised.video.mode.cannot.be.
found,.the.AdderView.CATxIP.1000.will.gradually.change.some.of.the.key.
parameters.to.discover.whether.a.video.lock.can.be.achieved..Support.for.
VESA.GTF.(Generalized.Timing.Formula).is.available.and.can.be.enabled.via.the.
The.half.width.video.modes.capture.every.other.pixel..These.are.not.generally.
recommended.for.normal.use.but.may.be.used.for.emergency.access.to.high.
resolution,.high.frequency.system.screens..Half.width.screens.can.be.expanded.
to.normal.width.using.the.scaling.features.of.the.viewer..
*.. Not.actually.a.VESA.mode.but.a.common.DOS/BIOS.mode
**.May.also.work.on.some.systems.when.the.operating.temperature.of.the.AdderView.
CATxIP.1000.is.controlled.
ꢇꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Safety information
Adder.Technology.Ltd.warrants.that.this.product.shall.be.free.from.defects.in.
workmanship.and.materials.for.a.period.of.two.years.from.the.date.of.original.
purchase..If.the.product.should.fail.to.operate.correctly.in.normal.use.during.the.
warranty.period,.Adder.will.replace.or.repair.it.free.of.charge..No.liability.can.be.
accepted.for.damage.due.to.misuse.or.circumstances.outside.Adder’s.control..
Also.Adder.will.not.be.responsible.for.any.loss,.damage.or.injury.arising.directly.
or.indirectly.from.the.use.of.this.product..Adder’s.total.liability.under.the.terms.
of.this.warranty.shall.in.all.circumstances.be.limited.to.the.replacement.value.of.
this.product.
•. For.use.in.dry,.oil.free.indoor.environments.only.
•. Both.the.AdderView.CATxIP.1000.and.its.power.supply.generate.heat.when.
in.operation.and.will.become.warm.to.the.touch..Do.not.enclose.them.or.
place.them.locations.where.air.cannot.circulate.to.cool.the.equipment..Do.
not.operate.the.equipment.in.ambient.temperatures.exceeding.40.degrees.
Centigrade..Do.not.place.the.products.in.contact.with.equipment.whose.
surface.temperature.exceeds.40.degrees.Centigrade.
•. Warning.-.live.parts.contained.within.power.adapter.
•. No.user.serviceable.parts.within.power.adapter.-.do.not.dismantle.
If.any.difficulty.is.experienced.in.the.installation.or.use.of.this.product.that.you.
are.unable.to.resolve,.please.contact.your.supplier.
• Plug.the.power.adapter.into.a.socket.outlet.close.to.the.module.that.it.is.
powering.
• Replace.the.power.adapter.with.a.manufacturer.approved.type.only..
• Do.not.use.the.power.adapter.if.the.power.adapter.case.becomes.damaged,.
cracked.or.broken.or.if.you.suspect.that.it.is.not.operating.properly.
• If.you.use.a.power.extension.cord.with.the.AdderView.CATxIP.1000,.make.
sure.the.total.ampere.rating.of.the.devices.plugged.into.the.extension.cord.
does.not.exceed.the.cord’s.ampere.rating..Also,.make.sure.that.the.total.
ampere.rating.of.all.the.devices.plugged.into.the.wall.outlet.does.not.exceed.
the.wall.outlet’s.ampere.rating.
• Do.not.attempt.to.service.the.AdderView.CATxIP.1000.yourself.
Safety considerations when using power switches with AdderView CATxIP
ꢀ000
•. Follow.the.manufacturer’s.instructions.when.setting.up.and.using.power.
switching.products.
•. Always.ensure.that.the.total.ampere.rating.of.the.devices.plugged.into.the.
power.switching.product.does.not.exceed.the.power.switching.product’s.
ampere.rating..Also,.make.sure.that.the.total.ampere.rating.of.all.the.
devices.plugged.into.the.wall.outlet.does.not.exceed.the.wall.outlet’s.
ampere.rating.
General Public License (Linux)
The.AdderView.CATxIP.1000.runs.an.embedded.version.of.the.Linux.operating.
system,.licensed.under.the.GNU.General.Public.License..To.obtain.the.source.
code.for.the.open-source.components.of.the.system.visit:
.
ꢇꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ. Limitation on Liability
End user licence agreement
UNDER.NO.CIRCUMSTANCES.SHALL.REALVNC.BE.LIABLE.FOR.ANY.
CONSEQUENTIAL.INDIRECT.OR.INCIDENTAL.DAMAGES.WHATSOEVER.
INCLUDING.LOST.PROFITS.OR.SAVINGS.ARISING.OUT.OF.THE.USE.OF.THE.
SOFTWARE,.THE.SERVICE.OR.THE.INFORMATION,.RELIANCE.ON.THE.DATA.
PRODUCED.OR.INABILITY.TO.USE.THE.SOFTWARE,.THE.SERVICE.OR.THE.
INFORMATION.EVEN.IF.REALVNC.HAS.BEEN.ADVISED.OF.THE.POSSIBILITY.OF.
SUCH.DAMAGES...BECAUSE.SOME.STATES.AND.COUNTRIES.DO.NOT.ALLOW.
THE.EXCLUSION.OR.LIMITATION.OF.LIABILITY.FOR.CONSEQUENTIAL.OR.
INCIDENTAL.DAMAGES,.THE.ABOVE.LIMITATION.MAY.NOT.APPLY.TO.YOU.
PLEASE.READ.THIS.AGREEMENT.CAREFULLY..THIS.AGREEMENT.CONCERNS.
ENHANCED.VNC.VIEWER.SOFTWARE.(“the.SOFTWARE”).FOR.USE.WITH.
THE.AdderView.CATxIP.1000.PRODUCT.(“the.PRODUCT”)..THE.SOFTWARE.
IS.PROVIDED.TO.ENABLE.YOU.TO.OPERATE.THE.PRODUCT...BY.USING.ALL.
OR.ANY.PORTION.OF.THE.SOFTWARE.YOU.ACCEPT.ALL.THE.TERMS.AND.
CONDITIONS.OF.THIS.AGREEMENT..IF.YOU.DO.NOT.ACCEPT.ALL.THE.TERMS.
AND.CONDITIONS.OF.THIS.AGREEMENT.THEN.DO.NOT.USE.THE.SOFTWARE...
BY.USING.ANY.UPDATED.VERSION.OF.THE.SOFTWARE.WHICH.MAY.BE.MADE.
AVAILABLE,.YOU.ACCEPT.THAT.THE.TERMS.OF.THIS.AGREEMENT.APPLY.TO.
SUCH.UPDATED.SOFTWARE.
NOTHING.IN.THIS.AGREEMENT.LIMITS.LIABILITY.FOR.DEATH.OR.PERSONAL.
INJURY.ARISING.FROM.A.PARTY’S.NEGLIGENCE.OR.FROM.FRAUDULENT.
MISREPRESENTATION.ON.THE.PART.OF.A.PARTY
ꢀ. Intellectual Property Rights
ꢄ. Export Control
The.Software.and.its.structure.and.algorithms.are.protected.by.copyright.and.
other.intellectual.property.laws,.and.all.intellectual.property.rights.in.them.
belong.to.RealVNC.Limited.(“RealVNC”),.a.United.Kingdom.Limited.Company,.
or.are.licensed.to.it...You.may.not.reproduce,.publish,.transmit,.modify,.create.
derivative.works.from,.publicly.display.the.Software.or.part.thereof...Copying.
or.storing.or.using.the.Software.other.than.as.permitted.in.Clause.2.is.expressly.
prohibited.unless.you.obtain.prior.written.permission.from.RealVNC.
The.United.States.and.other.countries.control.the.export.of.Software.and.
information....You.are.responsible.for.compliance.with.the.laws.of.your.local.
jurisdiction.regarding.the.import,.export.or.re-export.of.the.Software,.and.agree.
to.comply.with.such.restrictions.and.not.to.export.or.re-export.the.Software.
where.this.is.prohibited...By.downloading.the.Software,.you.are.agreeing.that.
you.are.not.a.person.or.entity.to.which.such.export.is.prohibited.
ꢅ. Term and Termination
ꢁ. Permitted and Prohibited Uses
This.licence.shall.continue.in.force.unless.and.until.it.is.terminated.by.RealVNC.
by.e-mail.notice.to.you,.if.it.reasonably.believes.that.you.have.breached.a.
material.term.of.this.Agreement
2.1. During.the.term.of.this.Agreement.and.as.long.as.you.comply.with.the.
terms.of.this.agreement,.you.may.use.the.Software.only.with.the.Product.
for.your.personal.use.or.for.the.internal.use.of.your.business...You.may.
make.as.many..copies.of.the.Software.as.you.require.for.your.own.internal.
business.purposes.only.and.for.archival.purposes..You.are.expressly.
prohibited.from.distributing.the.Software.in.any.format,.in.whole.or.in.
part,.for.sale,.or.for.commercial.use.or.for.any.unlawful.purpose.
In.the.case.above,.you.must.delete.and.destroy.all.copies.of.the.Software.in.your.
possession.and.control.and.overwrite.any.electronic.memory.or.storage.locations.
containing.the.Software.
ꢆ. General Terms
2.2. You.may.not.rent,.lease.or.otherwise.transfer.the.Software.or.allow.it.
to.be.copied...Unless.permitted.by.law,.you.may.not.reverse.engineer,.
decompile.or.disassemble.the.Software.
7.1. The.construction,.validity.and.performance.of.this.Agreement.shall.be.
governed.in.all.respects.by.English.law,.and.the.Parties.agree.to.submit.to.
the.exclusive.jurisdiction.of.the.English.courts.
7.2. If.any.provision.of.this.agreement.is.found.to.be.invalid.by.any.court.
having.competent.jurisdiction,.the.invalidity.of.such.provision.shall.not.
affect.the.validity.of.the.remaining.provisions.of.this.agreement,.which.
shall.remain.in.full.force.and.effect.
ꢂ. Warranty
REALVNC.DOES.NOT.WARRANT.ANY.RESULTS.OBTAINED.USING.THE.
SOFTWARE..TO.THE.EXTENT.PERMITTED.BY.LAW,.REALVNC.DISCLAIMS.
ALL.OTHER.WARRANTIES.ON.THE.SOFTWARE,.EITHER.EXPRESS.OR.
IMPLIED,.INCLUDING.BUT.NOT.LIMITED.TO.THE.IMPLIED.WARRANTIES.OF.
MERCHANTABILITY,.NON-INFRINGEMENT.OF.THIRD.PARTY.RIGHTS.AND.FITNESS.
FOR.PARTICULAR.PURPOSE...
7.3. No.waiver.of.any.term.of.this.agreement.shall.be.deemed.a.further.or.
continuing.waiver.of.such.term.or.any.other.term.
7.4. This.agreement.constitutes.the.entire.agreement.between.you.and.
RealVNC...
ꢇꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Frequency Energy
A.Category.5.(or.better).twisted.pair.cable.must.be.used.to.connect.the.units.in.
order.to.maintain.compliance.with.radio.frequency.energy.emission.regulations.
and.ensure.a.suitably.high.level.of.immunity.to.electromagnetic.disturbances.
All.other.interface.cables.used.with.this.equipment.must.be.shielded.in.order.
to.maintain.compliance.with.radio.frequency.energy.emission.regulations.and.
ensure.a.suitably.high.level.of.immunity.to.electromagnetic.disturbances.
European EMC directive 89/336/EEC
FCC Compliance Statement (United States)
This.equipment.has.been.tested.and.found.to.comply.with.the.limits.for.a.class.
A.computing.device.in.accordance.with.the.specifications.in.the.European.
standard.EN55022..These.limits.are.designed.to.provide.reasonable.protection.
against.harmful.interference..This.equipment.generates,.uses.and.can.radiate.
radio.frequency.energy.and.if.not.installed.and.used.in.accordance.with.the.
instructions.may.cause.harmful.interference.to.radio.or.television.reception..
However,.there.is.no.guarantee.that.harmful.interference.will.not.occur.in.a.
particular.installation..If.this.equipment.does.cause.interference.to.radio.or.
television.reception,.which.can.be.determined.by.turning.the.equipment.on.
and.off,.the.user.is.encouraged.to.correct.the.interference.with.one.or.more.
of.the.following.measures:.(a).Reorient.or.relocate.the.receiving.antenna..(b).
Increase.the.separation.between.the.equipment.and.the.receiver..(c).Connect.
the.equipment.to.an.outlet.on.a.circuit.different.from.that.to.which.the.receiver.
is.connected..(d).Consult.the.supplier.or.an.experienced.radio/TV.technician.for.
help..
This.equipment.generates,.uses.and.can.radiate.radio.frequency.energy.
and.if.not.installed.and.used.properly,.that.is,.in.strict.accordance.with.the.
manufacturer’s.instructions,.may.cause.interference.to.radio.communication..
It.has.been.tested.and.found.to.comply.with.the.limits.for.a.class.A.computing.
device.in.accordance.with.the.specifications.in.Subpart.J.of.part.15.of.FCC.rules,.
which.are.designed.to.provide.reasonable.protection.against.such.interference.
when.the.equipment.is.operated.in.a.commercial.environment..Operation.of.this.
equipment.in.a.residential.area.may.cause.interference,.in.which.case.the.user.at.
his.own.expense.will.be.required.to.take.whatever.measures.may.be.necessary.
to.correct.the.interference..Changes.or.modifications.not.expressly.approved.by.
the.manufacturer.could.void.the.user’s.authority.to.operate.the.equipment.
Canadian Department of Communications RFI statement
This.equipment.does.not.exceed.the.class.A.limits.for.radio.noise.emissions.from.
digital.apparatus.set.out.in.the.radio.interference.regulations.of.the.Canadian.
Department.of.Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de la classe A prescrites dans
le règlement sur le brouillage radioélectriques publié par le ministère des
Communications du Canada.
ꢇꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
©.2008.Adder.Technology.Limited
All.trademarks.are.acknowledged.
Release.1.0d
November.2008
Part.No..MAN-AVXIP1000
Adder.Corporation,
29.Water.Street,
Adder.Technology.Limited,
Technology.House,
Adder.Asia.Pacific
6.New.Industrial.Road,.
Hoe.Huat.Industrial.Building
#07-01,.
Newburyport,
Trafalgar.Way,.Bar.Hill,
Cambridge,.CB23.8SQ,
United.Kingdom
MA.01950,
Singapore.536199
United.States.of.America
Tel:.+1-888-932-3337
Fax:.+1-888-275-1117
Tel:.+44.(0)1954.780044
Fax:.+44.(0)1954.780081
Tel:.+65.6288.5767
Fax:.+65.6284.1150
.
Documentation by:
ꢇꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
B
E
A
Baud.rate
Configuration..19
initial.IP..25
overall.steps..19
saving.and.restoring..23
Confirmation.box..37
Connections..8
Computer.Access.Module..11
computer.system..11
global.user..11
host.computer..9
keyboard..9
Encryption.key..20
Encryption.settings..26
viewer..49
Hotkeys
changing..22
Access
local.setting..59
remote.setting..68
Binary
net.masks..80
Blue.dot
in.Select.Host.menu..38
Brackets..6
fitting..7
local.and.remote.users..34
Access.control
configuration..67
mask.calculation..81
Access.mode
shared.&.private..44
Account
creation.for.users..62
Address
explanation..79
Addressing
cascaded.computers..16
DNS..29
network.issues..28
power.switch.boxes..13
ADMIN
forgotten.password..23
password..22
Admin.password
initial.setup..20
local.setting..57
Advanced.options..56
Advanced.unit.configuration..
Artifacts
on.screen..42
Assistance
codes.and.macros..84
selecting.computers..34
HTTP.port
initial.setup..20
local.setting..58
remote.setting..66
when.altered..28
End.user.licence..87
F
Firewall..28
Firmware
current.version..63
recovery.procedure..32
upgrade..32
Force.encryption..57
Front.panel
controls.and.indicators..33
Full.screen.mode
escape.from.(F8)..42
Browser
connection..41
viewer.options..78
I
Identities
VNC.Viewer..76
Initial.configuration..19
calculating.mask..81
clearing..24
C
local.user..9
multiple.video.head..17
network.port..10
power.control..13
power.supply..12
Connector.specifications..83
Control.menus..42
Controls
viewer.options..45
Control.strings
power.switching..31
Cable.lengths
to.computers..11
Cable.specifications..83
Calibrate
mouse..44
screen..44
Calibrate.all
video.settings..47
CAM
connection..11
Cascade.connections
addressing..16
introduction..14
tips.for.success..15
Clear.IP.access.control
local.setting..58
Colour.level..72
Computer
connection..11
ports..5
selecting..34
Computer.Access.Module
connection..11
G
IP.address
explanation..79
local.setting..58
remote.setting..66
IP.gateway..66
IP.network.mask..66
IP.port
Gateway
local.setting..58
remote.setting..66
Global.user
access..39
connection..11
D
configuration.via.viewer..25
connecting..10
Daisy.chain.cable..83
Date
local.setting..57
DHCP
discovering.allocations..29
during.initial.setup..20
local.setting..58
remote.setting..66
DNS.addressing..29
H
K
from.Adder..50
Auto.calibrate..44
Autoscanning..23
Host.computer
configuration..69
connecting..9
connection..11
power.switching.setup..31
selection..43
Keyboard.codes
sending..46
Keyboard.layout
local.setting..57
remote.setting..63
ꢈ0
Download from Www.Somanuals.com. All Manuals Search And Download.
L
O
R
V
Local.connection..34
Local.network
connection..27
Local.user
connection..9
port..5
Octets
ip.address..79
Operation..33
Options.port
baud.rate..68
configuration..59
Rack.mounting..7
Recover
Selecting
cascaded.computers..37
computers..34
with.hotkeys..34
with.mouse.buttons..36
with.on-screen.menu..35
Serial.port
configuration..68
Server
configuration..69
Server.IP
local.setting..59
Shared
access.mode..44
Slow.connections
optimising.for..42
Supplied.items..6
Video.modes..85
Video.settings..45
Viewer.window..42
VNC.port
initial.setup..20
local.setting..58
remote.setting..66
when.altered..28
VNC.viewer
upgrade.failure..32
Refresh.screen..45
Reminder.banner..37
Remote.configuration
advanced.unit.configuration..
host.configuration..69
logging.and.status..70
network.configuration..66
serial.port.configuration..68
setting.IP.access.control..67
unit.configuration..63
user.accounts..62
Reset.configuration..60
Resync.mouse..45
RJ9.connector..13
Router..28
Logging..70
P
Logging.in.and.out
Log.on..40
Parts
connection..40
connection.options..72
download..40
supplied.and.extra..6
Password
admin..22
admin.-.setting..57
forgotten..23
initial.setup..20
remote.logon..40
setting.for.users..62
Port.number
M
window.options..77
Mask
explanation..79
for.IP.access.control..81
Menu.bar
viewer.window..42
Menu.key
changing..73
Mounting..7
W
Warranty..86
Web.browser
connection..41
viewer.options..78
entering..49
Power.control
connection..13
Power.strings
for.switching..31
Power.supply
connecting..12
part.number..6
Power.switching
addressing..13
configuration..31
connection..13
control.sequences..31
on.&.off.select..44
user.permissions..62
via.viewer..44
Z
Routing.status..37
T
Mouse
calibration..44
control..45
S
Threshold
adjustment..47
Time
local.setting..57
Time.&.date.configuration..65
Troubleshooting..50
Safety.information..86
Saving
configuration.settings..23
Scaling
VNC.Viewer..75
Screen
best.resolution..42
calibration..44
navigation..42
refresh..45
Screensaver
local.setting..57
Security
enabling..22
ensuring..30
general.steps..22
pointers..43
Multiple.video.head
connections..17
N
U
Net.mask..58
explanation..79
Networking.issues..27
Network.port
Unit.name
local.setting..57
remote.setting..63
Upgrade
firmware..32
recover.after.failure..32
Use.DHCP
Preferred.encoding..72
Private
access.mode..44
connection..10
local.setting..58
User.accounts..62
ꢈꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
|
