AOC Marine Instruments E1659FWU User Manual

USB Monitor User Manual  
E1659FWU  
©2013 AOC. All Rights Reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety  
National Conventions  
The following subsections describe notational conventions used in this document.  
Notes, Cautions, and Warnings  
Throughout this guide, blocks of text may be accompanied by an icon and printed in  
bold type or in italic type. These blocks are notes, cautions, and warnings, and they  
are used as follows:  
NOTE: A NOTE indicates important information that helps you make better use of  
your computer system.  
CAUTION: A CAUTION indicates either potential damage to hardware or loss of  
data and tells you how to avoid the problem.  
WARNING: A WARNING indicates the potential for bodily harm and tells you how to  
avoid the problem. Some warnings may appear in alternate formats and may be  
unaccompanied by an icon. In such cases, the specific presentation of the warning is  
mandated by regulatory authority.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the  
monitor falls, it can injure a person and cause serious damage to this product. Use only a cart,  
stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.  
Follow the manufacturers instructions when installing the product and use mounting  
accessories recommended by the manufacturer. A product and cart combination should be  
moved with care.  
Never push any object into the slot on the monitor cabinet. It could damage circuit parts  
causing a fire or electric shock. Never spill liquids on the monitor.  
Do not place the front of the product on the floor.  
Leave some space around the monitor as shown below. Otherwise, air-circulation may  
be inadequate hence overheating may cause a fire or damage to the monitor.  
See below the recommended ventilation areas around the monitor when the monitor is  
installed on the wall or on the stand:  
Installed on the wall  
Leave at least this space  
around the set.  
Installed with stand  
Leave at least this space  
around the set.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Cleaning  
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out  
the stain, instead of strong-detergent which will cauterize the product cabinet.  
When cleaning, make sure no detergent is leaked into the product. The cleaning  
cloth should not be too rough as it will scratch the screen surface.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Other  
If the product is emitting a strange smell, sound or smoke, disconnect the power  
plug IMMEDIATELY and contact a Service Center.  
Make sure that the ventilating openings are not blocked by a table or curtain.  
Do not engage the USB Monitor in severe vibration or high impact conditions  
during operation.  
Do not knock or drop the monitor during operation or transportation.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup  
Contents of the box  
Monitor  
*
Carry Case  
(Option)  
CD Manual  
USB Cable  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setup Stand  
Please setup the stand following the steps as below.  
Setup:  
Caution:  
Must put unit on a flat surface. Any uneven or sloped surface may result in unit  
damage or injury to user.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting Viewing Angle  
For optimal viewing, it is recommended to look at the full face of the monitor, and then  
adjust the monitor's angle to your own preference.  
Hold the stand so you will not topple the monitor when you change the monitor's  
angle.  
You are able to adjust the monitor's angle as below.  
NOTE:  
Do not touch the LCD screen when you change the angle. It may cause damage or  
break the LCD screen.  
The AOC E1659FWU monitor supports an auto-pivot function to keep the display  
upright as the monitor is rotated between portrait and landscape position. The monitor  
has to be rotated slowly and over 75with the tilt angle within 30to activate the  
auto-pivot function. The default setting for auto-pivot is on. You need to disable the  
auto-pivot function if you would like to manually rotate the display. If the auto-pivot is  
not functioned, rotate the display using orientation menu, then set the auto-pivot to on  
again.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Monitor  
Cable Connections In Rear of Monitor to Connect PC/Notebook/Laptop:  
Important!! Follow the software installation described on page 11 to 16 before  
connecting the USB monitor to your Notebook/Laptop/PC.  
1 Connecting the USB Monitor to your computer  
To protect the equipment, always turn off the computer before connecting.  
-
Connect one end of the USB cable to the USB Monitor and the other end of  
USB cable to the computer.  
-
Your computer should detect the USB Monitor automatically.  
Follow the procedure described starting on page 17 to configure your USB Monitor.  
Note: Some computers may not provide enough power to the USB Monitor from one  
USB port.  
If so, connect the other USB connector on the Y end of the cable into another USB on  
your computer.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation of USB Graphic software on  
your computer  
For Microsoft ® Windows® 8  
Important!! Install the USB Graphic software first before connecting the USB  
monitor to your computer.  
Windows 8 DisplayLink software can be installed from Windows update. Alternatively,  
the software can be downloaded from the DisplayLink website following the steps  
below.  
1. Double click on Setup.exe.  
The Windows User Account Control window opens (if enabled in the OS).  
2. Click Yes.  
The DisplayLink software end user license agreement window opens.  
3. Click I Accept.  
DisplayLink Core software and DisplayLink Graphics installs.  
Note: The screen may flash or go black during the installation. No message will be  
shown at the end of the installation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Connect your DisplayLink device via the USB cable to your PC.  
A message will be shown that DisplayLink software is configuring itself for first use.  
5. The screen should flash and the DisplayLink device should start to extend the  
Windows desktop.  
Note: You may need to reboot the computer before you use the DisplayLink  
enabled device.  
For Microsoft ® Windows® 7  
Important!! Install the USB Graphic software first before connecting the USB  
monitor to your computer.  
1. Double click on Setup.exe.  
The Windows User Account Control window opens (if enabled in the OS).  
2. Click Yes.  
The USB Monitor software end user license agreement window opens.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Click I Accept.  
DisplayLink Core software and DisplayLink Graphics installs.  
Note: The screen may flash or go black during the installation. The installation box  
above will disappear but no message will be shown at the end of the installation.  
4. Connect your AOC USB Monitor via the USB cable to your PC/Notebook. Installing  
device driver message will be shown on the taskbar.  
The Windows User Account control window opens.  
5. Click YES.  
DisplayLink will automatically install the AOC USB Monitor.  
The DisplayLink software end user license agreement windows opens (see  
above).  
6. Click I Accept.  
The DisplayLink USB Graphics software installs, without notification that it has  
completed.  
Note: You may need to reboot the computer before you use your AOC USB Monitor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Microsoft® Windows Vista®  
Important!! DO NOT connect USB Monitor to your PC/Notebook before the  
software install.  
1. Double click on Setup.exe.  
The Windows User Account Control window opens (if enabled in the OS).  
2. Click Yes.  
The USB Monitor software end user license agreement window opens.  
3. Click I Accept.  
DisplayLink Core software and DisplayLink Graphics installs.  
Note: The screen may flash or go black during the installation. The installation  
box above will disappear but no message will be shown at the end of the  
installation.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4. Connect your AOC USB Monitor via the USB cable to your PC/Notebook. Installing  
device driver message  
The Windows User Account control window opens.  
5. Click YES.  
DisplayLink automatically installs the AOC USB Monitor.  
The DisplayLink software end user license agreement windows opens (see  
above).  
6. Click I Accept.  
The DisplayLink USB Graphics software installs, without notification that it has  
completed.  
Note: On some machines you may need reboot before you can use your AOC USB  
Monitor.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Microsoft® Windows® XP  
Important!! DO NOT connect USB Monitor to your PC/Notebook before the  
software install.  
1. Double click on Setup.exe.  
The Windows User Account Control window opens (if enabled in the OS).  
2. Click I Accept.  
DisplayLink core software and DisplayLink Graphics installs.  
Note: The screen may flash or go black during the installation.  
3. Connect your AOC USB Monitor via the USB cable to your PC/Notebook. The  
following message (or similar) will be seen.  
Windows installs the AOC USB Monitor device.  
Note: The screen may flash or go black during the installation.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting the USB Monitor  
Follow this procedure to configure the AOC Monitor  
1. Open screen resolution  
2. Set the display options. Refer to the table below for details on each option.  
Menu  
Sub-Menu  
Description  
Use the drop down list to select a display to be  
configured.  
Display  
Use the drop down list and user the slider to choose  
a resolution  
Resolution  
Orientation  
Landscape  
Set the display to landscape view  
Portrait  
Set the display to portrait mode  
Landscape (flipped)  
Portrait (flipped)  
Duplicates these displays  
Extend these displays  
Set the display to upside down landscape mode  
Set the display to upside down portrait mode  
Reproduces the main display on the second display  
Extends the main display on the secondary display  
Multiple  
Displays  
The desktop appears on the display marked 1. The  
display marked 2 become blank.  
Show Desktop only on 1  
Shows Desktop only on 2  
The desktop appears on the display marked 2. The  
display marked 1 become blank.  
To control the behavior of an attached AOC USB monitor, it is also possible to use  
Windows Key ( ) + P to display a menu (and cycle through it) to switch mode.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To Control the Display  
You can use the AOC USB USB Monitor in mirror mode or extended mode. Settings  
may vary depending on your operating system.  
For Microsoft® Windows® 8 and Microsoft® Windows® 7  
Press the Windows® key ( ) + P to switch between different modes as shown below.  
For Microsoft® Windows® XP and Microsoft® Windows  
Vista®  
Right-click the “ ”icon in the system tray of your Windows ® desktop to configure the  
display settings.  
MENU  
Displaylink  
Manager  
Sub-menu  
Descsription  
Opens the Windows Screen Resolution  
window.  
Connects to the Microsoft Windows Update  
Server to check for newer  
software versions and downloads them, if  
available.  
Check for  
Updates  
Screen  
Resolution  
Screen  
Displays a list of available resolutions.  
Rotation is applied to the DisplayLink display  
Rotation  
Extends  
the  
display  
to  
the  
Extend To  
Extend  
right\left\above\below of the main display.  
Extends your Windows desktop onto this  
display.  
DisplayLink  
Devices  
Set as Main  
Monitor  
Sets this screen as the main display.  
Copies what is on the main display and  
reproduces it on this display.  
Mirror  
Off  
Switches off this display.  
Selects this option for better movie playback  
performance on the  
DisplayLink enabled displays.  
Opens the Windows Audio Configuration  
Window.  
Optimize for  
Video  
Audio Setup  
Video Setup  
Opens the Windows Screen Resolution  
window.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disconnecting the USB Monitor  
1. For Microsoft® Windows® 7 only, you can turn the monitor OFF by pressing the  
Windows key ( ) + P, and then selecting “Computer only”.  
For Microsoft® Windows vista® and Windows® XP, you can select OFF by  
right-Clicking the “ ” icon in the system tray.  
2. Remove the USB cable from the computer and monitor.  
Cleaning the USB Monitor  
Please follow the guidelines below when cleaning the USB Monitor:  
-
-
-
Always unplug the monitor before cleaning.  
Use a soft cloth to wipe the screen and other parts of the monitor  
Never spray liquids directly onto the LCD screen or use harsh chemical  
products to clean it.  
Precautions:  
for Microsoft ® Windows® 8, Windows® 7, Windows Vista® and  
Windows® XP  
Due to the configurations of computers and Windows® operating systems available,  
functionality may differ slightly than stated in the user manual. This may be due to the  
computer manufacture's BIOS and other custom configurations of the hardware,  
pre-installed software or operating system installed at time of production. If you have  
specific problems, you may need to contact the computer manufacturer to inquire  
about BIOS, hardware driver or operating system updates.  
-
The AOC USB Monitor utilizes an advanced video graphics controller to display  
the video. However, due to USB 2.0 transfer speed limitations, some or all portions of  
DVD playback may appear slow or choppy. This is not a malfunction of the Mobile  
USB Monitor. Move the video playback from the Mobile USB Monitor to your computer  
display for optimal video performance when viewing DVDs.  
-
On Windows ® XP systems, DVDs may not display correctly on the Mobile USB  
Monitor. Use your computer's built-in monitor to view DVDs.  
-
-
This product does not support 3D programs.  
In some software application programs that utilize certain direct draw commands  
such as some 2D-Games, the display on the Mobile USB Monitor will not be supported.  
USB Monitor.  
-
Monitor.  
To play DVDs, use the Media Player included with your operating system.  
-
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Media Playback  
On Windows 8, Windows 7, Vista, and Windows XP (XP in extend mode), the  
DisplayLink USB Graphic device can display media files and DVDs using the following  
media players:  
Windows Media Player 12  
Windows Media Player 11  
WinDVD 11 (www.intervideo.com)  
PowerDVD 12 (www.cyberlink.com)  
The DisplayLink USB Graphics device can display media files and DVDs using most  
media players. Media playback in mirror mode (XP) or in Basic mode (Vista and  
Windows 7) is not recommended.  
PC Requirements  
DisplayLink software can be used on PCs, from Netbooks, Notebooks/Laptops to  
Desktops. The driver will run on processors ranging from Atom N270 based PCs,  
basic single Core CPUs, and of course the latest Dual, Quad Core and Core i3/i5/i7  
CPUs.  
The performance of the software is dependent upon the processing power available,  
as well as the operating system in use. More capable systems offer higher  
performance.  
DisplayLink software is available for PCs running one of the following Windows  
operating systems:  
Windows 8 (32-bit or 64-bit)  
Windows 7 (32-bit or 64-bit)  
Windows Vista with Service Pack 1 or 2 (32-bit or 64-bit)  
Windows XP Home or Professional (including Tablet edition) with Service Pack 2  
or 3  
Windows Server 2003, 2008 and 2008 R2  
DisplayLink provide a version of Software for Windows Multipoint server. Please visit  
Windows Multipoint Server.  
Note: 64-bit editions of XP are not supported. Mac OS X support can be found at  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Windows 7 and Windows 8  
For Windows 7 and Windows 8, the Windows Experience Index (WEI) is a useful  
measure of hardware level. The WEI is accessible from Computer > Properties, or  
from Control Panel > System.  
The recommended typical hardware requirements for the PC are:  
WEI score of at least 3 in the „Graphics; Desktop performance for Windows Aero‟  
category.  
Overall WEI score of at least 3 as recommended by Microsoft.  
At least one USB 2.0 port.  
30 megabytes (MB) of free disk space.  
Computer screen for use with the DisplayLink device, if it is not integrated.  
Network access for software downloads, or access to a CD-ROM drive.  
Windows Vista  
For Windows Vista, the Windows Experience Index (WEI) is a useful measure of  
hardware level. The WEI is accessible from Computer > Properties, or from Control  
Panel > System.  
The recommended typical hardware requirements for the PC are:  
WEI score of at least 3 in the 'Graphics; Desktop performance for Windows Aero'  
category.  
Overall WEI score of at least 3 as recommended by Microsoft.  
At least one USB 2.0 port  
30 megabytes (MB) of free disk space.  
Computer screen for use with the DisplayLink device, if it is not integrated.  
Network access for software downloads, or access to a CD-ROM drive.  
If the PC specification is below this, performance will be lower (or CPU loading higher  
than acceptable).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows XP  
For 1-2 monitors, business usage, productivity target. This may not provide full frame  
rate DVD playback at full screen.  
1.2GHz Single Core CPU  
512MB memory  
For 3 monitors where 1 could run DVD video while also targeting productivity and  
business apps. Will support only 1 video of DVD resolution at full screen:  
1.6GHz CPU  
1GB memory  
For 6 screens where 1 screen can run full screen DVD video:  
1.8GHz Core Duo  
1GB memory  
At least one USB 2.0 port.  
30 megabytes (MB) of free disk space.  
Computer screen for use with the DisplayLink device, if it is not integrated.  
Network access for software downloads, or access to a CD-ROM drive.  
Graphics Card Support (Windows 8/Windows 7/Windows Vista)  
On Windows 8, Windows 7 and Windows Vista, DisplayLink software interacts closely  
with the primary graphics card. DisplayLink support and test a single graphics card  
(GPU) installed in a PC from all major GPU vendors (Intel, ATI, NVidia and Via). SIS  
graphic cards are not supported.  
The following GPU configurations may exhibit compatibility issues on Windows 8,  
Windows 7 and Vista in certain circumstances:  
NVIDIA SLI in SLI mode  
Other GPU configurations, including the following, are currently unsupported and will  
not function on Windows 8/Windows 7/Vista:  
Crossfire  
SLI not in SLI mode  
Multiple WDDM 1.1 or WDDM1.2 graphics drivers active at once  
Graphics Card Support (Windows XP)  
All graphics cards are supported on Windows XP.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
This section provides tips for correcting problems, should any occur. It also describes  
how to contact AOC should you encounter problems that you cannot resolve.  
Before you call AOC service center, please read the troubleshooting advice in this  
manual and in your computer User's Manual. You may also want to consult with your  
system administrator or company technical support staff.  
Problem & Question  
Possible Solutions  
Check the connectors. Make sure the USB cable is firmly  
connected to the monitor  
The monitor does not turn  
on  
Disconnect and reconnect the USB cable again.  
Check the condition of the USB cable. If the cable is frayed or  
damaged, replace the cable. If the connectors are soiled, wipe  
them with a clean cloth.  
Make sure the USB cable is properly connected the computer.  
The screen is blank,  
although the computer  
power is on  
Make sure the computer is on and working. The computer may  
be in sleep or power-saving mode, or displaying a blank screen  
saver. Move the mouse to “wake up” the computer.  
The picture “bounces” or  
moves in a wave-like  
pattern  
Move electrical devices that may cause electrical interference  
away from the monitor.  
Cannot play DVDs using  
the Third-Party DVD player Use the Media Player included in your operating system.  
program  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specification  
General Specification  
Model name  
E1659FWU  
Driving system  
TFT Color LCD  
39.49cm diagonal  
0.252(H)mm x 0.252(V)mm  
262K Colors  
Viewable Image Size  
Panel  
Pixel pitch  
Display Color  
Dot Clock  
85.5MHz  
Horizontal scan range  
48kHz  
Horizontal scan  
Size(Maximum)  
344.23mm  
60Hz  
Vertical scan range  
Vertical scan  
Size(Maximum)  
193.54mm  
Optimal preset  
resolution  
1366×768@60Hz  
Resolution  
Plug & Play  
VESA DDC2B  
Micro USB 3.0  
NA  
Input Connector  
Input Video Signal  
Power Source  
PC USB 5V  
8 W  
Power Consumption  
Standby < 1 W  
NA  
Off timer  
Connector Type  
Signal Cable Type  
Dimensions & Weight:  
Height  
Micro USB 3.0  
Detachable  
232.7mm  
371.9 mm  
35.5 mm  
1200 g  
Physical  
Characteristics  
Width  
Depth  
Weight (monitor only)  
Temperature:  
Operating  
0° to 40°  
Non-Operating  
Humidity:  
-25°to 55°  
Environmental  
Operating  
10% to 85% (non-condensing)  
5% to 93% (non-condensing)  
Non-Operating  
Altitude:  
Operating  
0~ 3658m (0~ 12000 ft )  
0~ 12192m (0~ 40000 ft )  
Non-Operating  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
FACTORY PRESENT TIMING TABLE  
HORIZONTAL  
VERTICAL  
STANDARD RESOLUTION  
FREQUENCY(kHz)  
FREQUENCY(Hz)  
VGA  
SVGA  
XGA  
640x480  
800x600  
1024x768  
1366x768  
31.469  
59.94  
60.317  
60.004  
59.85  
37.879  
48.363  
47.765  
SXGA  
Regulation  
FCC Notice  
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
NOTICE:  
The changes or modifications not expressly approved by the party responsible for compliance could void the user's  
authority to operate the equipment.  
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.  
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this  
equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to  
correct such interference.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WEEE Declaration  
Disposal of Waste Equipment by Users in Private Household in the European Union.  
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other  
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a  
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection  
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure  
that it is recycled in a manner that protects human health and the environment. For more information about where  
you can drop off your waste equipment for recycling, please contact your local city office, your household waste  
disposal service or the shop where you purchased the product.  
WEEE Declaration for India  
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other  
household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a  
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection  
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure  
that it is recycled in a manner that protects human health and the environment. For more information about where  
you can drop off your waste equipment for recycling in India please visit the below web link.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EPA Energy Star  
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and  
Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy  
efficiency.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Service  
Warranty Statement for Europe  
EU WARRANTY FOR AOC MONITORS  
LIMITED THREE-YEAR WARRANTY*  
For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from  
defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase.  
During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or  
rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. In the absent of the  
proof of purchase, the warranty will start 3 months after the date of manufacturing indicated on the product.  
If the product appears to be defective, please contact your local dealer or refer to the service and support section  
on www.aoc-europe.com for warranty instructions. Deliver the product freight pre-paid, along with the dated proof  
of purchase, to the AOC Certified or Authorized Service Center under the following condition:  
Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to  
protects your monitor well enough during transport).  
Put the RMA number on the address label.  
Put the RMA number on the shipping carton.  
AOC International (Europe) B.V. is not responsible for any damaged during transport due to improper packing.  
AOC International (Europe) B.V. will pay the return shipping charges within one of the countries specified within this  
warranty statement. AOC International (Europe) B.V. is not responsible for any costs associated with the  
transportation of product across international borders. This includes the international border within the European  
Union. If the LCD Monitor is not available for collection when the currier attends, you will be charged a collection  
fee.  
* This limited warranty does not cover any losses or damages that occur as a result of:  
Improper installation or maintenance  
Misuse  
Neglect  
Any cause other than ordinary commercial or industrial application  
Adjustment by non-authorized source  
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or  
Authorized Service Center  
Improper environments like humidity and dusts  
Damaged by violence  
Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other  
irregularities  
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.  
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A  
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER  
PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC  
INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND  
EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER BASED ON  
CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE  
OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT  
SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR  
FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME  
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY  
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM  
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE  
MEMBER COUNTRIES OF THE EUROPEAN UNION.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Statement for North & South America (excluding  
Brazil)  
WARRANTY STATEMENT  
for AOC Color Monitors  
Including those Sold within North America as Specified  
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of  
three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer  
purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either  
repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except  
as *stated below. The parts or product that are replaced become the property of EPI.  
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center  
closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI  
Authorized Service Center. If you cannot deliver the product in person:  
Pack it in its original shipping container (or equivalent)  
Put the RMA number on the address label  
Put the RMA number on the shipping carton  
Insure it (or assume the risk of loss/damage during shipment)  
Pay all shipping charges  
EPI is not responsible for damage to inbound product that was not properly packaged.  
EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is  
not responsible for any costs associated with the transportation of product across international borders. This  
includes the international borders of the countries within this warranty statements.  
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free  
* This limited warranty does not cover any losses or damages that occur as a result of:  
Shipping or improper installation or maintenance  
Misuse  
Neglect  
Any cause other than ordinary commercial or industrial application  
Adjustment by non-authorized source  
Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center  
Improper environment  
Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities  
This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third  
party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A  
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL  
FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR  
IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT  
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY  
NOT APPLY TO YOU.  
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE.  
EPI‟ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER  
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE  
BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF  
PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.  
YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.  
In the United States of America, this limited warranty is only valid for Products purchased in the Continental United  
States, Alaska, and Hawaii.  
Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.  
Information in this document is subject to change without notice.  
For more details, please visit:  
IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Accel Printer 8200 User Manual
Adder Technology Switch AdderLink IP User Manual
Aiphone Power Supply SKK 620B User Manual
AKG Acoustics Microphone C747 V11 User Manual
Allied Telesis Network Card AT 2872SX User Manual
Allied Telesis Switch 8PS User Manual
Allied Telesis Switch SB244 03 User Manual
Allied Telesis Welding System AT FS238a 1 User Manual
American Standard Hot Tub 2425018W User Manual
American Standard Plumbing Product 7415101 User Manual