Quick Start Guide
Mio R-3 Remote Control Device
Overview
Mio R-3 (FG148-03) Specifications (Cont.)
The Mio R-3 remote (FG148-03) provides custom control features, contained in
an elegant handheld rechargeable device. The Mio R-3 communicates with a
NetLinx master via a wireless ZigBee® network.
Supported
Languages
• English
• French
• German
• Greek
• Italian
• Japanese
• Korean
• Simplified Chinese
• Portuguese
• Russian
• Spanish
You need VisualArchitect and KeypadBuilder to properly program this device.
The application and documentation are available from www.amx.com.
• Other languages supported by Glyphs
Weight
• .45 lbs (20 g) without batteries
• .55 lbs (25 g) with batteries
Power
1
1
Transmission Mode
Current Menu
Certifications
• FCC ID: CWU-ZMO
• CE
• IEC-60950
• TELEC
Battery Meter
Custom Macro Buttons
Operating
Environment
• Operating Temperature: 0° to 40° C (32° to 104° F)
• Storage Temperature: -20° to 70° C (-4° to 158° F)
• Relative Humidity: 5% to 85%
Custom Mode Options
3
6
2
5
4
7
Included Items
• Mio-RBP Rechargeable Lithium-ion Battery (FG147-10)
Other AMX
Equipment
• DB-9 extension cable (FG10-727)
• Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817)
• Custom engraving (FG147-01)
• Mio-RCC Kit (FG147-03K)
• Mio-RCC Charging Base (FG147-02)
• NXR-ZGW (FG5791-01)
8
9
1 - Power
14 - Select
4
5
10
11
2 - Record
3 - Pause
15 - Move Right
16 - Guide
12
6
• NXR-ZRP (FG5791-02)
4 - Stop
17 - Exit
8
10
14
9
15
13
5 - Rewind
6 - Play
18 - Move Down
19 - Volume Up
20 - Last Selected
21 - Channel Up
22 - Mute
Installing Your Custom Buttons
17
16
3
2
7
1.
Flip and turn the Mio R-3 device so that the buttons are facing away from
you and the device is upside down.
18
7 - Fast Forward
8 - Skip Back
9 - Skip Forward
10 - Menu
15
20
21
19
13
14
11
12
2.
Holding the device in both hands, place your thumbs on the battery door
and push up to slide the battery door free. The battery door will slide in the
direction of the bottom end of the device.
16
22
23 - Volume Down
24 - Channel Down
25 - Input
24
23
11 - Info
3.
Unscrew the 6 screw points indicated in FIG. 2.
12 - Move Up
13 - Move Left
26 - Enter
25
26
26
28
Numeral Keypad
6 Screw Points
FIG. 1 The Mio R-3 Device
Touch And Tilt Sensor
The Mio R-3 wakes up upon touching either the chrome side rails or pressing a
button. When the remote times out while holding it, you can reawaken the device
by tilting it. Errant jostling such as a bumped table will not wake the device
unless you are holding it.
Programming Jack
Specifications
The Mio R-3 device specifications are as follows:
FIG. 2 Internal Mio R-3 Components
Mio R-3 (FG148-03) Specifications
4.
5.
6.
Turn the unit over so the buttons are facing you.
Lift the top assembly away from the PCB.
If necessary, push out the standard buttons from the front of the top assem-
bly.
Battery
Rechargeable Lithium-Ion
Transmission
Frequencies
• Zigbee RF wireless network
• IR 38 Khz
• IR 455 Khz
7.
8.
9.
Drop on your custom button pad and verify the alignment with the guide
posts on the PCB.
Transmission
Range
• ZigBee: 100 feet (30.48m)
• IR 38 Khz: 100 feet (30.48m)
• IR 455 Khz: 50 feet (15.24m)
Place the top assembly back down on the PCB and return the unit over,
exposing the 6 screw points.
Tighten the 6 screw points.
Top Components • LED - blue backlit buttons indicate device is awake
• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x
10. Place the battery door back on the device, and slide the door upwards to
lock it in place.
7.98mm
• Pushbuttons - the power button is red backlit; the rest are blue
backlit buttons. 45 buttons; 9 custom buttons (3 macro and 6
device).
Rear Component • Programming Port - 2.5 mm stereo female conductor jack
• Battery Door
• Rechargeable Battery Connection
Dimensions
(HWD)
9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)
Download from Www.Somanuals.com. All Manuals Search And Download.
