WorldDSL™ G.S
Double Pair/Line Power
G.SHDSL for CO and Customer Premises
ADC’s WorldDSL G.S is a family of high-speed
G.shdsl access devices complying with the
ITU-T G.991.2 G.shdsl standard. These modems
are specifically designed for the diverse
telecommunication needs of global markets. Ideal
for telco and enterprise networks, WorldDSL G.S
products conform to international standards to
ensure compatibility, performance and safety
within your network environment.
The new G.shdsl modems are part of the broad
family of WorldDSL HDSL modems and share common chassis’, enclosures, management software
and accessories. They are fully G.shdsl compliant including 36/72 timeslot operation and all
required performance monitoring statistics. Both G.821 and G.826 statistics are provided for E1
ports giving users maximum flexibility. Each WorldDSL G.S modem is software-selectable as a
communication master or communication slave, so any two units can be used for a point-to-point
circuit. The modems are part of a fully managed system, interfacing with a VT100 compatible
terminal or a PC. The units can be managed via their local craft port or a central management card
installed in a CO shelf. ADC’s Stargazer, Windows or UNIX-based SNMP management software
can be used to provision the system, collect alarm and performance data, and conduct diagnostic
tests locally or from a remote management station. In any of these modes, the remote unit can be
programmed and managed through the CO, minimizing travel to the outdoor site.
Features:
• Intelligent multi-range line power management
• Fiber optic quality (BER 10-10)
for 120, 150, and 200 VDC per EN60950
• Single pair operation or double pair operation to
double the bandwidth or extend the reach
Single Pair – 2.304 Mbps
• Complete G.shdsl reach/range coverage including
line power
Double Pair – 4.608 Mbps
• Support wetting current
• Nx64K rate selectable from 64 kbps to 2.304
Mbps single pair or 64 kbps to 4.608 Mbps
double pair
• One pair can be set up as 1+1 protection for the
other pair, TSP
• Two pairs can also be configured as point to
• E1 and FEI (Fractional EI)
• 10/100 Ethernet bridge
multi-point
• Auto loop crossover management
• Automatic protection of TS0 and TS16 for
• 10/100 IEEE 802.3u, layer 2 MAC bridge, wire-
speed, auto negotiation or programmable for
10/100, full/half modes
fractional E1 use
• Software programmable data port—V.35/V.36/RS-
530/X.21
• Centralized software download for easy upgrade
• Jitter meets G.823 requirements
• E1/FE1 and dataport or E1/FE1 and Ethernet port
simultaneous operation sharing the bandwidth
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
WorldDSL™ G.S
Specifications and Ordering Information
0.4mm
with noise1
0.6mm
0.8mm
with noise1
no noise2
3.8
with noise1
no noise2
no noise2
9.3
DSL rate
4608
4095
3584
3072
2560
2304
2048
1536
1280
1024
768
2.2
2.4
2.5
5.7
2.9
3.0
3.2
3.7
4.0
4.2
4.8
5.5
6.0
4.4
7.6
6.3
6.8
3.9
4.8
7.8
11.1
11.8
12.3
12.8
13.2
13.6
14.1
14.7
15.3
15.7
16.8
17.1
4.0
5.0
8.0
7.2
4.1
5.4
8.4
8.2
4.3
5.8
8.6
9.0
4.4
6.0
8.8
9.5
4.5
6.4
9.0
10.2
11.7
12.7
13.5
14.7
16.8
17.1
4.8
7.4
9.6
4.9
8.0
9.8
5.0
8.4
10.0
11.0
11.6
12.6
5.5
9.6
512
5.8
11.0
12.0
384
6.3
O rd e r i n g I n f o r m a t i o n
Description
type
catalog number
GS-2P-E1
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GN-XX-01
Wide Temp Plug in card for EMS-830 CO chassis WD921GN-XX-02
GS-2P-E1 Wide Temp
GS-2P E1 + Serial Nx64
GS-2P eBridge
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-XX-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GN-1B-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GN-1B-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GN-1B-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-XX-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-XX-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD920GL-1B-01
Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD921GL-1B-01
GS-2P E1 + eBridge
GS-2P E1 + Serial + eBridge
GS-2P LP E1
GS-2P LP E1 + Serial Nx64
GS-2P LP eBridge
GS-2P LP E1 + eBridge
GS-2P LP E1 + Serial + eBridge Plug in card for EMS-830 CO chassis or ERE-811 remote enclosure WD924GL-1B-01
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
100458ae 12/06 revision © 2003, 2004, 2006 aDc telecommunications, Inc. all rights reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|