MCD196
DVD MicroTheatre
User manual
!
5
6
M I C R O T H E A T R E M C D 1 9 6
-
STANDBY ON
SOURCE
1
3
DISPLAY/CLOCK SET
0
-
VOLUME
+
DBB
DSC
7
8
iR
PRESET
5
@
4
9
AUX
TUNING
2
-
-
DVD/WMA MP3 CD COMPATIBLE
PULLTO OPEN
#
$
3
1
4
$
¡
5
8
)
^
6
CLOCK
7
7
9
*
8
&
@
#
0
!
(
™
£
%
≤
2
3
4
Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic" and the double-D symbol
are trademarks of Dolby Laboratories.
MANUFACTURED UNDER LICENSE FROM
DIGITALTHEATER SYSTEMS, INC. US PAT. NO
5,451,942,5,956,674, 5,974,380, 5,978,762 AND
OTHERWORLDWIDE
PATENTS ISSUED AND PENDING. "DTS" AND
"DTS DIGITAL SURROUND" ARE REGISTERED
TRADEMARKS OF DIGITALTHEATER
SYSTEMS, INC. COPYRIGHT 1996, 2000
DIGITALTHEATER SYSTEMS, INC.ALL RIGHTS
RESERVED.
.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reserve engineering
or disassembly is prohibited.
Windows Media is a trademark of
Microsoft Corporation.
5
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja
7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian; Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
Church Slavic; Slavonic 6785
Chuang; Zhuang
Tamil
Tatar
Telugu
Thai
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Tibetan
Tigrinya
Tonga (Tonga Islands) 8479
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Uzbek
Fijian
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue 7365
6
Index
English ------------------------------------------------8
------------------------------------------------- 38
7
Contents
General Information
Disc Operations
Features ................................................................ 10
Discs for playback .............................................. 10
Supplied accessories .......................................... 10
Environmental information .............................. 11
Care and safety information ............................ 11
Playing discs ......................................................... 23
Using the disc menu .......................................... 23
Basic playback controls ............................... 23-25
Pausing playback
Selecting a track/chapter/title
Resuming playback from the last stopped
point
Connections
Zoom
Step 1:Placing speakers .................................... 13
Step 2:Connecting speakers............................ 14
Step 3:Antenna connection ............................. 14
Step 4:ConnectingTV ................................. 14-15
UsingVideo In jack
Repeat and shuffle modes
Repeat A-B
Program
Forward/Reverse Searching
Time search & search by chapter/track
number
Information display during playback
Special disc features ........................................... 25
Playing a Title
Using S-Video In jack
Using an accessory RF modulator
Step 5:Connecting the power cord............... 16
Optional: Connecting additional equipment 16
Camera Angle
Changing the Audio Language
Changing the Audio Channel
Subtitles
Playing MP3 disc.................................................. 26
General operation
Controls
Controls on the system .................................... 17
Controls on the remote control .............. 17-18
Preparations
Playback selection
Before using the remote control .................... 19
Replacing battery................................................ 19
Step 1: Setting the clock ................................... 19
Step 2:Setting video preference ............... 20-21
Step 3:Setting language preference ................ 21
Playing JPEG Picture CD................................... 26
General operation
Playback selection
Special JPEG features ......................................... 26
Zoom picture
Playback with multi-angles
Basic Functions
Switching the system on ................................... 22
Power-saving automatic standby ..................... 22
Sound control ..................................................... 22
DBB
DSC
LOUDNESS
Volume control ................................................... 22
8
Contents
System Menu Options
Tape Operation/Recording
Basic operations ................................................. 27
Tape playback ...................................................... 31
General information on recording ................. 31
Preparation for recording ................................ 32
Synchro start CD recording ............................ 32
One touch recording......................................... 32
SYSTEM SETUP ............................................ 27-29
TV SYSTEM
SCREEN SAVER
TVTYPE
PASSWORD
RATING
DEFAULT
Clock/Timer
Clock setting ....................................................... 33
Timer setting ....................................................... 33
Sleep timer setting ............................................. 33
LANGUAGE SETUP .......................................... 28
VIDEO SETUP .................................................... 29
BRIGHTNESS
CONTRAST
HUE
SATURATION
Specifications ........................................... 34
AUDIO SETUP ................................................... 29
Troubleshooting .............................. 35-36
DOWNMIX
3D PROCESSING
LPCM
Glossary......................................................... 37
NIGHT MODE
Radio Reception
Tuning to radio stations .................................... 30
Programming radio stations............................. 30
Automatic programming ............................... 30
Manual programming...................................... 30
Tuning to preset radio stations ....................... 30
9
General Information
IMPORTANT!
PLEASE NOTETHATTHEVOLTAGE
SELECTOR LOCATED ATTHE REAR OF
THIS SYSTEM IS PRESET AT 220V FROM
THE FACTORY. FOR COUNTRIESTHAT
OPERATE AT 110V-127V, PLEASE ADJUST
TO 110V-127V BEFOREYOU SWITCH ON
THE SYSTEM.
Features
The following formats can’t be supported
Additional Component Connections
Lets you connect other audio and audio/visual
components to the system so you can use the
system’s surround sound speakers.
•
The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV,
•
The discs recorded under Joliet format
Region Codes
Parental control (rating level)
Lets you set a rating level so that your children
cannot watch a DVD that has a rating higher
than you set.
DVDs must be labeled for ALL regions or Region
3 in order to play on this DVD system.You
cannot play discs that are labeled for other
regions.
Sleep timer
Enables the system to switch to standby mode
automatically at a preset time.
Night Mode
Lets you compress the dynamic range, reducing
the difference in loudness between different
sounds in Dolby Digital mode.
Notes:
– For mixed mode discs, only one mode will be
selected for playback according to the recording
format.
Discs for playback
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improperly
formatted discs will not play on this system.
– DTS surround audio output is not available in
this DVD player.
Your DVD System will play:
– DigitalVideo Discs (DVDs)
– Video CDs (VCDs)
– SuperVideo CDs (SVCDs)
– DigitalVideo Discs + Rewritable (DVD+RW)
– Compact Discs (CDs)
Supplied accessories
– Picture (Kodak, JPEG) files on CDR(W)
– Windows Media Audio (WMA)
– Supported MP3-CD format.
– Composite video cable (yellow)
– MW loop antenna
– FM wire antenna
•
•
•
•
•
•
•
ISO 9660 / UDF format
Max. title/album name –10 characters
Max. title number plus album is 255.
Max. nested directory is 8 levels.
The max. album number is 32.
The max. MP3 track number is 999.
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
– Remote Control with battery
– This instruction booklet and a quick start guide
•
10
General Information/Maintenance
Do not block the vents
Environmental information
●
Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free
space all around the player for adequate
ventilation.
Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
10 cm
(4 inches)
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
10 cm
(4 inches)
10 cm
(4 inches)
DVD Micro Hi-Fi System
Care and safety information
●
●
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.
Avoid high temperatures,moisture,
water and dust
●
Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight).Always
keep disc trays closed to avoid dust buildup on
the lens.
Cleaning the cabinet
Use soft cloth slightly moistened
with a mild detergent solution.
Do not use a solution containing
alcohol, spirits, ammonia or
abrasives.
●
●
●
●
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Cleaning discs
●
To clean a CD, wipe it in a straight line from the
center towards the edge using soft and lint-free
cloth.A cleaning agent may damage the disc.
The apparatus shall not be exposed to dripping
or splashing.
Install the unit near the AC outlet and where the
AC power plug can be easily reached.
●
●
Write only on the printed side of a CDR(W)
and only with a soft felt-tipped pen.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
Handle the disc by its edge. Do not touch the
surface.
Cleaning the disc lens
●
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Avoid condensation problem
●
The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
11
General Information/Maintenance
Finding a suitable location
Hearing Safety
Listen at a moderate volume.
●
●
Place the player on a flat, hard, stable surface.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
●
Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than a
minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
Cleaning the head and the tape paths
To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and
pressure roller(s) Cafter every 50 hours of
tape operation.
●
●
●
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the head by playing a
cleaning tape once.
●
Sound can be deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. So after prolonged listening, what sounds
"normal" can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
●
●
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
C B A B C
Demagnetising the head
Use a demagnetising tape available at your
dealer.
Listen for reasonable periods of
time:
●
●
●
Prolonged exposure to sound, even at normally
"safe" levels, can also cause hearing loss.
Be sure to use your equipment reasonably and
take appropriate breaks.
Be sure to observe the following
guidelines when using your
headphones.
●
●
●
●
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
●
Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a traffic hazard and is illegal in many
areas.
12
Connections
MW antenna
AM
AERIAL
FM antenna
FM
AERIAL
Speaker
(left)
Speaker
(right)
VIDEO OUT
VIDEO
VIDEO
SUB WOOFER
OUT
DIGITAL
OUT
R
LINE OUT
L
RIGHT
LEFT
+
RSP-134V
–
SPEAKER 4Ω
AC power cord
IMPORTANT!
– The type plate is located at the rear of
the system.
Step 1: Placing speakers
Front
Front
speaker
speaker
– Before connecting the AC power cord
to the wall outlet, ensure that all other
connections have been made.
– Never make or change any
connections with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
(
left
)
(
right
)
VIEWING AREA
Place the front left and right speakers at equal
distances from theTV set and at an angle of
approximately 45 degrees from the listening
position.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a
safety circuit has been built in.Therefore,
your system may switch to Standby
mode automatically under extreme
conditions. If this happens, let the system
cool down before reusing it (not available
for all versions).
Notes:
– To avoid magnetic interference, do not position
the front speakers too close to yourTV set.
– Allow adequate ventilation around the DVD
System.
13
Connections
FMAntenna
Step 2: Connecting speakers
2
1
Connect the speaker wires to the SPEAKER
terminals, right speaker to "R" and left speaker to
"L", coloured (marked) wire to "+" and black
(unmarked) wire to "-". Fully insert the stripped
portion of the speaker wire into the terminal as
shown.
●
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) terminal.
Step 4: ConnectingTV
Notes:
IMPORTANT!
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– You only need to make one video
connection from the following options,
depending on the capabilities of yourTV
system.
– Connect the DVD system directly to
theTV.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
UsingVideo In jack (CVBS)
Step 3: Antenna connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals.Adjust the
position of the antenna for optimal reception.
MW Antenna
1 Use the composite video cable (yellow) to
connect the system's VIDEO jack to the video
input jack (or labelled as A/V In,Video In,
Composite or Baseband) on theTV set.
2 To hear the sound of this DVD Player through
yourTV, use the audio cables (white/red-not
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on theTV.
●
Position the antenna as far as possible from aTV,
VCR or other radiation source.
14
Connections
Using an accessory RF modulator
Using S-Video In jack
IMPORTANT!
– If yourTV set only has a single
Antenna In jack (or labelled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback viaTV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
RF coaxial cable toTV
ANT IN TO TV
AUDIO IN
VIDEO
IN
R L
1 Use the S-Video cable (not supplied) to connect
the system's S-VIDEO jack to the S-Video
input jack (or labelled asY/C or S-VHS) on the
TV set.
CH3 CH4
Antenna or
CableTV signal
Back of RF Modulator
(example only)
2 To hear the sound of this DVD Player through
yourTV, use the audio cables (white/red-not
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on theTV.
AM
AERIAL
FM
AERIAL
VIDEOUT
VIDEO
S-VIDEO
SUB WOOFER
OUT
DIGITAL
OUT
1 Use the composite cable (yellow) to connect the
system's VIDEO jack to the video input jack on
the RF modulator.
2 Use an RF coaxial cable (not supplied) to
connect the RF modulator to yourTV's RF jack.
15
Connections
Note:
Step 5: Connecting the power
– If you are connecting equipment with a mono
output (a single audio out terminal), connect it to
the AUX left terminal. Alternatively, you can use a
“single to double” cinch cable (the output sound
still remain mono).
cord
IMPORTANT!
– If your system is equipped with a
Voltage Selector, set theVOLTAGE
SELECTOR (located on the back of the
left speaker) to match the local power
line.
AM
AERIAL
FM
– Never make or change any connection
with the power switched on.
AERIAL
VIDEO IN
VIDEO OUT
C
DIGITAL IN
AUDIO IN
VIDEO
S-VIDEO
R
B
SUB WOOFE
OUT
DIGITAL
OUT
After everything is connected properly, plug in
the AC power cord to the power outlet.
R
NE OU
L
RIGHT
LEFT
AUDIO
INPUT
+
–
RSP-134V
SPEAKER 4Ω
D
Optional:Connecting additional
equipment
Using theVCR for recording DVDs B
Connect one of the system's VIDEO OUT
jacks to the correspondingVIDEO IN jack, and
LINE OUT (R/L) jacks to the AUDIO IN jacks
on theVCR.This will allow you to make analogue
stereo (two channel, right and left) recordings.
IMPORTANT!
– Some discs are copy-protected.You
cannot record the disc through aVCR or
digital recording device.
– When making connections, make sure
the colour of cables matches the colour
of jacks.
– Always refer to the owner's manual of
the other equipment for complete
connection and usage details.
Recording (digital) C
Connect the system's DIGITAL OUT jack to
the DIGITAL IN jack on a digital recording
device (such as DTS-DigitalTheatre compatible,
with Dolby Digital decoder).
M
I
C
R
O
T
H
E
A
T
R
E
M
C
D
1
9
6
Before starting operation, set the DIGITAL OUT
according to the audio connection. (See
"DIGITAL OUT".)
STANDBY-ON
SOURCE
AUDIO OUT
L
DISPLAY/CLOCK SET
-
VOLUME
+
DBB
DSC
R
iR
PRESET
A
AUX
Connecting an active subwoofer D
Connect the DVD micro system's
SUBWOOFER OUT jack to the AUDIO
INPUT jack on an active subwoofer (not
supplied).
TUNING
Listening to the playback of other
equipment A
Use a cinch cable (not supplied) to connect
AUX on the front panel of the DVD player to
the analogue audio out terminals of an external
equipment (TV,VCR, Laser Disc player, DVD
player or CD Recorder).
Before starting operation, press SOURCE on
the front panel to select AUX or press AUX on
the remote in order to activate the input source.
16
Controls
8DSC
Controls on the system
1STANDBY-ON
–
selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, POP or ROCK).
–
switches the system on or to standby mode.
9VOLUME -/+
adjusts the volume upward/downward.
2iR sensor
–
–
infrared sensor for remote control.
0n
– to connect a headphone.
3DISPLAY/CLOCK SET
Standby mode
*– sets the system clock.
Playback mode
!OPEN•CLOSE0
–
to open or close the disc door.
–
displays the system clock.
@AUX jack
During disc playback
–
to connect an auxiliary device.
–
selects a disc information display mode.
#PULLTO OPEN
4Mode Selection
–
to access tape keys.
9 ............................. In DISC mode, to stop playback
or clear a program.
2;........................... In DISC mode, to start or
interrupt playback.
PRESETí/ë
................................. Disc: skips to the previous/next
chapter/title/track.
................................. Tuner: selects a preset radio
station.
................................. Clock: adjusts the hours and
minutes in clock/timer setting
mode.
$Tape Deck Operation
RECORD● ... starts recording.
PLAY 2 ............ starts playback.
REW/F.FWD à / á
................................. fast rewinds/winds the tape.
STOP•OPENÇ0
................................. stops tape playback/recording;
opens the tape compartment.
PAUSEÅ ....... interrupts recording or playback.
TUNING 22/33
Controls on the remote control
Tuner
12
–
–
press to tune to a lower/higher radio frequency
gradually.
press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
–
switches the system to standby mode.
2Numeric Keypad (0-9)
inputs a track/title/chapter number of the disc.
3PROG/ANGLE
–
Disc
–
VCD/CD/MP3-CD//WMA/JPEG/PICTURE CD:
enters the program menu.
Tuner: programs preset radio stations.
DVD: selects a DVD camera angle.
–
searches fast backward/forward in a disc.
5Display screen
to view the current status of the system.
–
–
–
6SOURCE
to select the respective sound source : DISC
TUNER, TAPE or AUX.
4 SOURCE
to select the respective sound source : DISC
TUNER, TAPE or AUX.
5 SYSTEM MENU (disc mode only)
to enter or exit the system menu bar.
–
–
7DBB
enables or disables bass enhancement.
–
–
* = Press and hold the button for more than three seconds.
17
Controls
^ SLEEP/TIMER
6DISC MENU (disc mode only)
Standby mode
–
DVD/VCD: enters or exits the disc contents
menu.
–
–
–
sets a time for switching on the system
automatically.
switches the set timer ON or OFF.
Playback mode
–
VCD2.0: in stop position, switches the playback
control (PBC) mode on or off .
722/33
sets the sleep timer function (auto-off).
Tuner
& LOUD/DBB
–
–
press to tune to a lower/higher radio frequency
gradually.
press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
–
enables or disables automatic loudness
adjustment.
*– enables or disables bass enhancement.
*DSC
Disc
–
selects different types of preset sound equalizer
–
–
(not for MP3 CD/WMA) searches backward/
forward in a disc at different speeds.
In DISC mode, to select a movement direction in
the disc menu or system menu bar.
settings (CLASSIC, JAZZ, POP or ROCK).
( MUTE
–
to interrupt or resume sound reproduction.
) DISPLAY / CLOCK
83/4
–
for disc
In DISC mode, to select a movement direction in
the disc menu or system menu bar.
slows backward/forward during DVD playback
–
selects a disc information display mode.
*– sets the system clock.
–
¡REPEAT A-B
9OK
–
–
forVCD/CD: to repeat a specific section within
the same track.
to exit or confirm the selection.
0í/ë
–
for DVD: to repeat a specific section in a disc.
–
Disc: skips to the previous/next chapter/title/
track.
Tuner: selects a preset radio station.
Clock: adjusts the hours and minutes in clock/
timer setting mode.
™AUDIO
forVCD
–
–
–
sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
–
selects an audio language.
!9
–
In DISC mode, to stop playback or clear a
program.
£ZOOM
DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on theTV screen.
–
@2;
–
In DISC mode, to start or interrupt playback.
≤GOTO
In DISC mode, to fast search in a disc by
–
#VOL +/-
–
entering a time, title, chapter or track.
adjusts the volume upward/downward.
$MODE
Notes for remote control:
–
to select various repeat modes or the shuffle
play mode for a disc.
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
– Then select the desired function ( 2;, í,
ë for example).
%SUBTITLE
–
selects a subtitle language.
* = Press and hold the button for more than three seconds.
18
Preparations
IMPORTANT!
Step 2: Setting the clock
– Make sure to complete the
preparation procedures before operating
the system.
1 Go to Standby mode.
2 Press and hold DISPLAY/CLOCK SET (or
DISPLAY/CLOCK on the remote control) on
the front panel.
Before using the remote control
1 Pull out the plastic protective sheet.
➜ The hour digits flash on the display screen.
●
If needed, press 9 to select between 12 hour or
24 hour display.
2 Select the source you wish to control by pressing
one of the source select keys on the remote
control (for example DISC,TUNER).
3 Press í/ë on the front panel or on the
remote control to set the hours.
3 Then select the desired function (for example
ÉÅ , à , á).
4 Press DISPLAY/CLOCK SET (or
DISPLAY/CLOCK on the remote control)
again.
➜ The minute digits flash on the display screen.
5 Press í/ë on the front panel or on the
remote control to set the minutes.
6 Press DISPLAY/CLOCK SET (or
DISPLAY/CLOCK on the remote control) to
confirm the clock setting.
Remove the plastic protective sheet
Replacing battery (lithium
CR2025) into the remote control
Notes:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 20 seconds.
1 Press the slot on the battery compartment.
2 Pull out the battery compartment.
3 Replace a new battery and fully insert the
battery compartment back to the original
position.
1
CR2025
2
3
CAUTION!
Batteries contain chemical substances, so
they should be disposed of properly.
19
Preparations
Step 3: Setting video
preference
PAL
– If the connectedTV is PAL system, select this
mode. It will change the video signal of a NTSC
disc and output in PAL format.
IMPORTANT!
– Make sure you have completed all the
necessary connections. (See
"Connections-ConnectingTV".)
AUTO
– If the connectedTV is multi system, select this
mode.The output format will be in accordance
with the video signal of the disc.
–
SettingTVTYPE
Select the aspect ratio of theTV to be
connected.
4:3 PS (Pan and Scan mode )
– If you have a conventionalTV set and your
DVD is not formatted for widescreen viewing,
use this setting. A wide picture is displayed on
the wholeTV screen with a portion
automatically cut off.
Turn on theTV set and set it to the correct
Video-In channel.
➜ You may go to channel 1 on yourTV set, then
press the channel button repeatedly until you see
theVideo In channel.
➜ Or, you can use theTV remote control to
select different video modes.
➜ Or, setTV to channel 3 or 4 if you are using
an RF modulator.
4:3 LB (Letterbox mode )
1 In stop mode or during playback, press
– If you have a conventionalTV set and your
DVD is formatted for widescreen viewing, use
this setting. A wide picture with bands displayed
on the upper and lower portions of theTV
screen.
SYSTEM MENU.
2 Press 22/33/5/4on the remote control to
toggle through the functions and select your
preferential option.
➜ Move to SYSTEM SETUP and press 4.
➜ Move to one of the following and press 33.
–
SettingTV SYSTEM
Allows you to select the colour system matching
the connectedTV set.
NTSC
– If the connectedTV is NTSC system, select
this mode. It will change the video signal of a PAL
disc and output in NTSC format.
16:9 (Wide screen mode)
– If you have a widescreenTV set, use this
setting (you must also set your widescreenTV to
“full size”) available on a disc, then the disc’s own
preference will be used.
20
Preparations
Note:
OSD LANGUAGE (On-Screen Display)
Switches the display language on theTV screen.
Select the language from the displayed list.
The format you select must be available on the
disc. If it is not, the setting forTVType will not affect
the picture during playback.
AUDIO LANG (DVD only)
Switches the display language of the sound track.
Select the language from the displayed list.
To exit the menu
Press SYSTEM MENU again.
SUBTITLE LANG (DVD only)
Switches the display language of the subtitle.
Select the language from the displayed list.
Step 4: Setting language
preference
MENU LANG (DVD only)
Select the language for the DVD menu.
You can select your preferred language settings
so that this DVD Micro System will automatically
switch to the language for you whenever you
load a disc. If the language selected is not
available on the disc, the language set by default
will be used instead. But the menu language of
the DVD Micro System cannot be changed once
selected.
When the selected language is not recorded in
the DVD, one of the recorded languages will be
selected automatically (except for OSD).
You can reset all the DVD settings except for
Rating.
If the language selected is not available on the
disc, the original language designated by each
disc will be selected.
3 Press 5/4to select a language and press OK.
4 Repeat steps 2~3 for other settings.
CHINESE
To exit the menu
Press SYSTEM MENU again.
1 In stop mode or during playback, press
SYSTEM MENU.
2 Press 22/33/5/4on the remote control to
select your preferred option.
➜ Move to LANGUAGE SETUP and press
4.
➜ Move to one of the following and press 33.
21
Basic Functions
Switching the system on
LOUDNESS
●
●
Press STANDBY-ON on the front panel.
➜ The system will switch to the last selected
source.
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
Press SOURCE repeatedly (or DISC,
●
Press LOUD/DBB on the remote to enable or
disable LOUDNESS feature.
TUNER, TAPE or AUX on the remote).
➜ The system will switch to the selected source.
➜
icon appears/disappears after this feature
is enabled/disabled.
To switch the system to standby mode
Press STANDBY ON on the system (or 2on
the remote control).
●
●
Volume control
If in tape mode or recording mode, press
Turn the VOLUME -/+ control on the front
panel clockwise or anticlockwise or press VOL
+/- on the remote to increase or decrease the
volume level.
➜ ”VOL XX” is displayed on the display panel.
“XX” denotes the volume level.
STOP•OPENÇ0first.
➜ The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc has stopped playing.
To listen through the headphone
Connect the headphone plug to the n socket
on the front panel of the DVD player.
➜ The speakers will be muted.
●
To switch off the volume temporarily
Press MUTE on the remote.
➜ Playback will continue without sound and
“MUTE” appears.
●
●
Sound Control
DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
To activate sound reproduction, you can:
– press MUTE again;
DBB (Dynamic Bass Boost)
– adjust the volume controls;
– change source.
DBB enhances the bass response.
●
Press DBB on the front panel or press LOUD/
DBB on the remote twice to enable/disable
DBB feature.
➜ Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce
the volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC repeatedly to select: CLASSIC, JAZZ,
POP or ROCK.
22
Disc Operations
IMPORTANT!
Using the disc menu
For disc withTable Of Contents, a menu may
appear on theTV screen once you load the disc.
– This system is designed for regular
discs.Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
disc mechanism.
– Do not move the system during
playback. Doing so may damage the
system.
– DVD discs and players are designed
with regional restrictions. Before playing
a disc, make sure the disc matches the
regional code of your player.
– According to the format requirement
of DVD orVCD, some operations may be
different or restricted.
To select a playback feature or item
●
●
Use 22/33/5/4 and OK or Numeric
Keypad (0-9) on the remote.
➜ Playback will start automatically.
To access or exit the menu
Press DISC MENU on the remote.
ForVCD with Playback Control (PBC)
feature (version 2.0 only)
PBC playback allows you to playVideo CDs
interactively, following the menu on the display.
– Do not push on the disc tray or put
any objects other than disc on the disc
tray. Doing so may cause the disc player
malfunction.
– If “INVALID KEY” appears on theTV
screen when a button is pressed, it
means the function is not available on
the current disc at the current time.
●
In stop position, press DISC MENU.
➜ If PBC was ON, it will switch to OFF and
continue playback.
➜ If PBC was OFF, it will switch to ON and
return to menu screen.
Basic playback controls
Pausing playback (DVD/VCD/CD/MP3
/WMA)
Playing discs
1 Connect the power cords of the system andTV
(or any optional stereo or AV receiver) to a
power outlet.
1 During playback, press 2;.
➜ Playback will pause and sound will be muted.
2 Press 2;again to resume.
2 Turn on theTV power and set to the correct
Video In channel. (See "Setting up theTV".)
Selecting a track/chapter/title (DVD/
VCD/CD/MP3/WMA)
3 Press STANDBY-ON on the DVD Player front
panel.
1 Press PRESETí/ë during playback to go to
➜ You should see the blue Philips DVD
background screen on theTV.
the previous or next chapter/title/track.
2 To go directly to any chapter/ title/track, enter
the chapter/ title/track number using the
Numeric Keypad (0-9).
4 Press OPEN/CLOSE 0to open the disc
door and load in a disc, then press the same
button again to close the disc door.
➜ Make sure the label side is facing up.
Resuming playback from the last
stopped point (DVD/VCD/CD/MP3
/WMA)
5 Playback will start automatically (depending on
the disc type).
➜ If a disc menu appears on theTV, see "Using
the Disc Menu".
➜ If the disc is locked by parental control, you
must enter your four-digit password. (See
"SYSTEM SETUP-PASSWORD".)
●
●
In stop mode and when a disc has not been
removed, press 2;.
To cancel resume mode
6 At any time, simply press 9 to stop playback.
In stop mode, press 9 again.
23
Disc Operations
Zoom (DVD/VCD/JPEG)
2 Press REPEAT A-B again at your chosen end
point.
Zooming allows you to enlarge or reduce the
video image during playback.
1 Press ZOOM on the remote repeatedly to
enlarge or reduce the playback video image.
➜ The section A and B can be set only within
the same chapter/track.
➜ The section will now repeat continuously.
3 To exit the sequence, press REPEAT A-B
2 Press 22/33/5/4to pan across theTV
again.
screen.
➜ “A-B CANCEL” is displayed on theTV
screen.
Repeat and shuffle modes
(DVD/VCD/CD/MP3/WMA)
Program (not for Picture CD)
●
Press MODE repeatedly to choose a repeat
mode during playback.
To select favourite tracks/chapters for playback in
preferred sequence.
For DVD
CHAPTER
– to repeat playback of the current chapter.
TITLE
– to repeat playback of the current title.
OFF
– switches off the repeat mode.
1 Press PROG/ANGLE on the remote to enter
the program mode.
ForVCD/MP3/CD
REP 1
– to repeat playback of the current track.
2 Use the Numerical Keypad (0-9) to directly
input the tracks or chapters.
3 Press OK to confirm.
REPALL
– to repeat playback of the whole disc.
4 Press 2;to start playback.
REPEATALL SHUFFLE
– to repeat playback of the whole disc in
random order.
REPEATALL SHUFFLE OFF
– switches off the repeat mode.
Repeat A-B (DVD/VCD/CD/MP3/WMA)
1 Press REPEAT A-B at your chosen starting
point.
24
Disc Operations
Special disc features
Forward/Reverse Searching (DVD/VCD/
CD/MP3/WMA)
Playing aTitle (DVD)
1 Press 22/33during playback to select the
required speed: X2, X4, X8 or X20 (backward or
forward).
1 Press DISC MENU.
➜ The disc title menu appears on theTV screen.
2 Use 22/33/5/4to select a play option.
➜ Sound will be muted.
3 Press OK to confirm.
2 To return to normal speed, press 2;.
Camera Angle (DVD)
Note:
For MP3 andWMA, this function can be carried
out only through 22/33 buttons on the front
panel.
●
●
●
●
Press PROG/ANGLE on the remote
repeatedly to select different desired angle.
Changing the Audio Language (for DVD
recorded with multiple languages)
Time search & search by chapter/track
number (DVD/VCD/CD/MP3/WMA)
Press AUDIO on the remote repeatedly to
select different audio languages.
1 Press GOTO until the time or chapter/track
edit box appears.
Changing the Audio Channel (forVCD
only)
2 Enter hours, minutes and seconds from left to
right in the time edit box using the Numeric
Keypad (0-9) on the remote.
Press AUDIO on the remote to select the
available audio channels provided by the disc
(Mono Left, Mono Right or Stereo).
OR
Enter your desired chapter/track number in the
chapter/track edit box using the Numeric
Keypad (0-9) on the remote.
Subtitles (DVD)
Press SUBTITLE on the remote repeatedly to
select different subtitle languages.
Information display during playback
(DVD/VCD/CD/MP3/WMA)
●
During playback, press DISPLAY/CLOCK
SET (or DISPLAY on the remote) to show
disc information on theTV screen.
For DVD/VCD/CD
➜ Elapsed playback time of the current track/
title.
➜ Remaining playback time of the current track/
title.
➜ Elapsed playback time of the whole disc.
➜ Remaining playback time of the whole disc.
➜ Display off.
For MP3 CD
➜ Elapsed playback time of the current track.
➜ Remaining playback time of the current track.
25
Disc Operations
Playing MP3/WMA/JPEG Disc
Playing JPEG Picture CD
IMPORTANT!
General operation
– You have to turn on yourTV and set to
the correctVideo In channel. (See
"Setting up theTV".)
1 Load a JPEG Picture CD.
➜ A data disc menu appears on theTV screen
and playback starts automatically from the first
file.
Playing MP3/WMA disc
2 Press 22 to move to the folder column on
the left of theTV screen, then use 5/4to
select a folder and press OK to open it.
General operation
1 Load an MP3/WMA disc.
➜ A data disc menu appears on theTV screen
and playback starts automatically from the first
track.
3 Press 33to move to the file column on the
right of theTV screen and then use 5/4to
highlight a file; or directly use the Numeric
Keypad (0-9) to input a file number.
2 Press 22 to move to the album column on the
left of theTV screen, then use 5/4 to select an
album and press OK to open it.
4 Press OK to confirm.
➜ The playback will start from the selected
picture to the end of the folder.
Playback selection
During playback, you can:
●
●
Press PRESETí/ë to select another file in
the current folder.
Use 22/33/5/4on the remote to rotate/
flip the picture files.
3 Press 33to move to the track column on the
right of theTV screen and then use 5/4to
highlight a track; or directly use the Numeric
Keypad (0-9) to input a track number.
●
●
Press 2; repeatedly to pause/resume playback.
Press 9 to stop playback and return to the disc
content menu.
4 Press OK to confirm.
Special JPEG features
➜ The playback will start from the selected
track to the end of the album.
Zoom picture (JPEG)
Note:
●
●
During playback, press ZOOM repeatedly to
display the picture with different scales (X2, X3,
X4, X1/2, X1/3 and X1/4).
Use 22/33/5/4 to view the zoomed
picture.
The disc reading time may exceed 10 seconds due
to large number of songs compiled onto the disc.
Playback selection
During playback, you can:
Playback with multi-angles (JPEG)
●
●
Press PRESETí/ë to select another track in
the current album.
●
During playback, press 22/33/5/4 to rotate
the picture on theTV screen.
5: flip the picture vertically.
4: flip the picture horizontally.
Press 2; repeatedly to pause/resume playback.
22: rotate the picture anti-clockwise.
33: rotate the picture clockwise.
26
System Menu Options
Basic operations
1 Press SYSTEM MENU to enter the Setup
Menu.
2 Press 22/33 to select a page to be set.
3 Press 5/4 to highlight an option.
4 Enter its submenu by pressing 33 or OK.
5 Move the cursor by pressing 5/4 to highlight
the selected item.
➜ ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 3 minutes, the
screen saver will be activated.
➜ In cases of value setting, press 5/4 to adjust
values.
➜ OFF: Screen saver is disabled.
6 Press OK to confirm.
TVTYPE
To return to the upper-level menu
See "Preparations-Step 3: Setting video
preference" for details.
●
●
Press 22.
To exit from the menu
PASSWORD
Press SYSTEM MENU again.
➜ The settings will be stored in the player’s
memory even if the player is switched off.
You can enter your four-digit password to
activate or deactivate rating control.
➜ "
➜ "
" is displayed if rating control is activated.
" is displayed if rating control is
Note:
deactivated.
– Some of the features in the System Menu
Options are described in “Preparations”.
SYSTEM SETUP
The options included in SYSTEM SETUP page
are:“TV SYSTEM”,“SCREEN SAVER”,“TVTYPE”,
“PASSWORD”,“RATING” and “DEFAULT”
To change password
1 Move to "PASSWORD" and press 33or OK
to enter its submenu.
2 If " " is displayed, enter the default password
(0000) and press OK to unlock.
●
If " " is displayed, directly proceed with Step 3
and 4.
TV SYSTEM
3 Enter your new four-digit password using
Numeric Keypad (0-9) on the remote.
4 Press OK to confirm and the new password
takes effect.
See "Preparations-Step 3: Setting video
preference" for details.
SCREEN SAVER
Note:
This function is used to turn the screen saver on
or off.
– The default password (0000) is always active
even if the password has been changed.
27
System Menu Options
4 PG 13
RATING
– Material is unsuitable for children under age
13. Parental Guidance suggested.
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc.This feature lets you set a playback limitation
level.
The rating levels are from 1 to 8 and are country
dependent.You can prohibit the playing of
certain discs that are not suitable for your
children or have certain discs played with
alternative scenes.
5-6 PG-R, R
– Parental Guidance – Restricted;
recommended that parents restrict children
under 17 from viewing or allow them to view
only when supervised by a parent or adult
guardian.
7 NC-17
– No children under age 17; not recommended
for children under age 17.
8 ADULT
– Material for adults only; viewed only by adults
due to graphic sexual scenes, violence, or
language.
DEFAULT
Setting the “Default” function will reset all
options and your personal settings to the factory
defaults and all your personal settings will be
erased.
●
VCD, SVCD and CD have no level indication, so
parental control function has no effect on those
kinds of discs.This applies to most illegal DVD
discs.
1 Press 5/4 to highlight “RATING”.
2 Enter its submenu by pressing 33.
3 Use 5/4 to highlight a rating level for the disc
inserted.
➜ DVDs that are rated above the level you
selected will not play unless you enter your four-
digit password and choose a higher level rating.
1 Press 5/4 to highlight “DEFAULT”.
2 Highlight RESTORE by pressing 33.
3 Press OK to confirm selection.
Note:
– Some DVDs are not encoded with a rating
though the movie rating may be printed on the
Disc cover.The rating level feature does not work
for such Discs.
Caution!
– When this function is activated, all
settings will be reset to factory defaults.
Rating explanations
1 KID SAFE
– Suitable for children.
LANGUAGE SETUP
2 G
The options included in LANGUAGE SETUP
page are: "OSD LANGUAGE", "AUDIO LANG",
"SUBTITLE LANG" and "MENU LANG".
See "Preparations-Step 4: Setting language
preference" for details.
– General Audience; recommended as
acceptable for viewers of all ages.
3 PG
– Parental Guidance suggested.
28
System Menu Options
VIDEO SETUP
DIGITAL OUT
The options included inVIDEO SETUP page are:
"COMPONENT", "TV MODE", "BRIGHTNESS",
"CONTRAST", "HUE" and "SATURATION".
➜ DIGITAL/OFF:Tur ns off the digital output.
➜ DIGITAL OUT: If you have connected
your DIGITAL OUT to a multi-channel decoder/
receiver.
➜ DIGITAL/PCM: Only if your receiver is not
capable of decoding multi-channel audio.
DOWNMIX
This options allows you to set the stereo
analogue output of your DVD Player.
➜ LT/RT: Select this option if your DVD Player
is connected to a Dolby Pro Logic decoder.
➜ STEREO: Select this option when output
delivers sound from only the two front speakers.
➜ VSS: Allows the DVD player to use virtual
surround sound effects.
BRIGHTNESS
Adjusts the brightness level. Range: 0-12.
CONTRAST
Adjusts the contrast level. Range: 0-12.
3D PROCESSING
HUE
3D processing provides a virtual surround sound
experience using just two speakers.
➜ OFF, CONCERT, CHURCH, PASSIVE,
WIDE and LIVE
Adjusts the hue level. Range: -6-+6.
SATURATION
Adjusts the saturation level. Range: 0-12.
LPCM
AUDIO SETUP
If you connect the DVD Player to a PCM
compatible receiver via the coaxial terminal, you
may need to adjust 'LPCM'.
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.
The options included in AUDIO SETUP page
are: "DIGITAL OUT", "DOWNMIX", "3D
PROCESSING", "LPCM" and "NIGHT MODE".
➜ 48K: Playback a disc recorded at the sampling
rate of 48kHz.
➜ 96K: Playback a disc recorded at the sampling
rate of 96kHz.
➜ 192K: Playback a disc recorded at the
sampling rate of 192kHz.
NIGHT MODE
➜ OFF: Select this when you want to enjoy the
surround sound with its full dynamic range.
➜ ON: Select this to level out the volume. High
volume outputs will be softened and low volume
outputs are brought upward to an audible level.
This feature is only available for movies with
Dolby Digital mode.
29
Radio Reception
M I C R O T H E A T R E M C D 1 9 6
-
STANDBY ON
SOURCE
CLOCK
DISPLAY/CLOCK SET
-
VOLUME
+
DBB
DSC
iR
PRESET
AUX
TUNING
Tuning to radio stations
Manual programming
1 Press SOURCE on the set or TUNER on the
remote repeatedly until the desired waveband
(FM or MW) is displayed.
1 Tune to your desired station (refer to “Tuning to
radio stations”).
2 Press PROG/ANGLE to activate
programming.
2 Press and hold TUNING 22/33and release
the button.
➜ PROG flashes on the display.
➜ The radio automatically tunes to a station
with sufficient reception.
3 Press PRESETí/ë to allocate a number
from 1 to 20 to this station.
3 Repeat step 2 if necessary until you find the
4 Press PROG/ANGLE again to confirm the
desired station.
setting.
➜ PROG disappears.
●
To tune to a weak station, press TUNING
22/33briefly and repeatedly until you have
found optimal reception.
5 Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Programming radio stations
You can store up to a total of 20 radio stations
for each band in the memory.
Tuning to preset radio stations
Automatic programming
●
Press PRESETí/ë until the desired preset
station is displayed.
Press PROG/ANGLE on the remote for
more than three seconds to activate
programming.
➜ All available stations are programmed.
➜ AUTOis displayed and available stations are
programmed in order of waveband.
30
Tape Operation/Recording
General information on
recording
●
●
For recording, use only NORMAL (IEC type I)
tapes on which the tabs have not yet been
broken.This deck is not suitable for recording on
METAL (IEC IV) type tapes.
-
-
DVD/WMA MP3 CD COMPATIBLE
The best recording level is set automatically.
Altering the VOLUME, INCREDIBLE
SURROUND or DBB will not affect the
recording in progress.
●
●
At the very beginning and end of the tape, no
recording will take place during the 7 seconds
when the leader tape passes the recorder heads.
Tape playback
1 Press SOURCE on the front panel repeatedly
(or TAPE on the remote control) to select the
TAPE source.
To protect a tape from accidental erasure, have
the tape in front of you and break out the left
tab. Recording on this side is no longer possible.
If, however, you wish to record over this side
again, cover the tabs with a piece of adhesive
tape.
➜ The display shows “TAPE” throughout tape
operation.
2 Press PULLTO OPEN to open the tape door.
3 Insert a recorded tape and close the tape door.
●
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offence.This equipment
should not be used for such purposes.
●
Load the tape with the open side downward and
the full spool to the left.
4 Press PLAY 2 to start playback.
●
The key is automatically released at the end of a
tape, except if PAUSE; has been activated.
5 To pause, press PAUSE;. Press again to
resume.
6 By pressing REW à or F.FWD á on the
system fast winding of tape is possible in both
directions.
IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
7 To stop the tape, press STOP•OPENÇ0.
Note:
– The sound source cannot be changed while
playing or recording a tape.
31
Tape Operation/Recording
Preparation for recording
Synchro start CD recording
1 Select TAPE source.
1 Select CD source.
●
Press í/ë to select the desired track.
2 Load a recordable tape into the tape deck with
the full spool to the left.
2 Press RECORD● to start recording.
➜ Playing of the CD programme starts
3 Prepare the source to be recorded.
CD/VCD/DVD – load the disc.
automatically from the beginning of the CD. It is
not necessary to start the CD player separately.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
One touch recording
When recording is in progress
1 Select DISC, TUNER or AUX source.
●
●
●
To stop recording, press STOP•OPENÇ0.
It is not possible to listen to another source.
It is not possible to activate the timer function.
2 If necessary, start playback of the selected
source.
3 Press RECORD● to start recording.
32
Clock/Timer
M I C R O T H E A T R E M C D 1 9 6
-
STANDBY ON
SOURCE
DISPLAY/CLOCK SET
CLOCK
-
VOLUME
+
DBB
DSC
iR
PRESET
AUX
TUNING
Clock setting
See "Preparations-Step 2: Setting the clock".
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 In active mode, press SLEEP/TIMER on the
remote control repeatedly to select a preset
time.
Timer setting
●
The system can be used as an alarm clock,
whereby DISC orTUNER is switched on at a set
time (one time operation).The clock time needs
to be set first before the timer can be used.
➜ The selections are as follows (time in
minutes):
SLEEP OFF™ SLEEP 90™ SLEEP 80™
SLEEP 70™ SLEEP 60™ SLEEP 50™
SLEEP 40™ SLEEP 30™ SLEEP 20™
SLEEP 10™ SLEEP OFF
1 In standby mode, press and hold SLEEP/
TIMER on the remote control for more than
three seconds.
➜ "SET TIMER" is displayed briefly.Then, the
hour digits flash on the display panel.
2 When you reach the desired length of time, stop
pressing the SLEEP/TIMER button.
2 Pressí/ë on the front panel or on the
remote control to set the hours and press
SLEEP/TIMER to confirm.
To deactivate the sleep timer
●
Press SLEEP/TIMER repeatedly until "SLEEP
OFF" is displayed, or press STANDBY ON y
(or y on the remote).
➜ The minute digits flash on the display panel.
3 Pressí/ë on the front panel or on the
remote control to set the minutes and press
SLEEP/TIMER to confirm.
4 In standby mode, press TIMER on the remote
control to activate or deactivate the timer.
➜ Display shows
if activated, and disappears
if deactivated.
33
Specifications
AMPLIFIER
TUNER
Output power .......................................... 2 x 5 W RMS
Signal-to-noise ratio....................................... ≥ 60 dBA
Frequency response .........63 – 16000 Hz, 3 dB
Input sensitivity AUX ....................... 0.5V (max. 2V)
Impedance loudspeakers ......................................... 4 Ω
Impedance headphones .................... 32 Ω -1000 Ω
FM wave range ................................... 87.5 – 108 MHz
MW wave range (9kHz) ............... 531 – 1602 kHz
(10kHz).............530 – 1700 kHz
Tuning grid...............................................9110kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity ................................................................. ≥ 28 dB
Total harmonic distortion..................................... ≤ 5%
Frequency response ............ 63 – 5500 Hz (-6 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
DVD PLAYER
LaserType ................................................ Semiconductor
Disc Diameter.............................................. 12cm / 8cm
Video Decoding........................... MPEG-2 / MPEG-1
Video DAC ................................................................ 10 Bits
Signal System ............................................... PAL / NTSC
Video Format ..................................................... 4:3 / 16:9
Video S/N........................................... 56 dB (minimum)
CompositeVideo Output ................ 1.0Vp-p, 75 Ω
S-Video Output ............................. Y - 1.0Vp-p, 75 Ω
...........................................................C - 0.286Vp-p, 75 Ω
Audio DAC .......................................... 24 Bits / 96 kHz
Frequency Response .... 4 Hz - 20 kHz (44.1kHz)
......................................................4 Hz - 22 kHz (48kHz)
......................................................4 Hz - 44 kHz (96kHz)
Digital Output.........................................................................
....... SPDIF (Sony Philips digital interface) Coaxial
Number of programmable tracks ......................... 16
Signal-to-noise ratio....................................... ≥ 65 dBA
Channel separation .......................... ≥ 40 dB (1 kHz)
Total harmonic distortion...............< 0.1% (1 kHz)
TAPE DECK
Frequency response
Normal tape (type I)...... 125 – 6300 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 40 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
2-way bass reflex system
Dimensions (w x h x d) ....................................................
...................................................... 146 x 228 x 160 (mm)
GENERAL INFORMATION
AC Power ............................................................ 110-127V
/220-240V, 50Hz/60Hz, switchable
Dimensions (w x h x d) .. 146 x 228 x 216 (mm)
Weight (with/without speakers) ....... 4.57 / 2.3 kg
Standby power consumption ............................≤ 7W
Specifications and external appearance are
subject to change without notice.
34
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power.
✔
Check if the AC power cord is properly
connected.
✔
✔
Check if the disc is inserted upside down.
Wait until the moisture condensed at the lens
has cleared.
“NO DISC” is displayed.
✔
✔
Replace or clean the disc, see “Maintenance”.
Use a readable disc or correctly recorded format
MP3-CD.
No picture.
✔
Select the appropriate video input mode on the
TV set.
✔
✔
✔
Check if theTV set is switched on.
Check the video connection.
Check if the system is securely connected.
Distorted or poor picture.
✔
Sometimes a slight picture distortion may appear.
This is not a malfunction.
✔
✔
Clean the disc.
Connect the system to the S-video input of your
TV set.
✔
✔
The aspect ratio is fixed on the DVD disc.
The aspect ratio may not be changed for some
TV systems.
The aspect ratio of the screen cannot be
changed even though you have set theTV
shape.
✔
✔
Insert a readable disc.
Check the disc type, color system and region
code.
The DVD player does not start playback.
✔
✔
✔
Clean the disc.
Place the disc with the playback side down.
Press SYSTEM MENU to turn off the setup
menu.
✔
✔
Cancel the parental control rating function or
change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
✔
Disconnect the power plug from the jack, and
insert again.
The DVD player does not respond when
buttons are pressed.
35
Troubleshooting
Problem
Solution
The language for the sound or subtitle
cannot be changed when playing a DVD.
✔
✔
Multi-language sound or subtitle is not recorded
on the DVD.
Changing the language for the sound or subtitle
is prohibited on the DVD.
No image is output when a function is
selected.
✔
✔
Make sure the component is connected
correctly.
Press the correct function button for the input
source.
Sound cannot be heard or is of poor
quality
✔
✔
✔
✔
✔
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
If the system is in pause, slow motion or fast
forward/reverse mode, press PLAY/PAUSE 2;
to resume the normal play mode.
✔
Make sure the MP3-CD was recorded within 32-
256 kbps bit rate with sampling frequencies at
48 kHz, 44.1 kHz or 32 kHz.
✔
✔
Ensure that the DTS disc also supports Dolby
Digital output.
Poor radio reception.
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
✔
Increase the distance between the System and
yourTV set or VCR.
Recording or playback cannot be made
✔
✔
✔
Clean deck parts, see “Maintenance”.
Use only NORMAL tape.
Apply a piece of adhesive tape over the missing
tab space.
✔
✔
Check the speaker connections and location.
Left and right sound outputs are
reversed.
Point the remote control at the remote control
sensor of the unit.
The remote control does not function.
✔
✔
✔
✔
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
✔
✔
Set the clock correctly.
If recording is in progress, stop it
The timer is not working
✔
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The Clock/Timer setting is erased
36
Glossary
activated, playback will be prohibited if the
software’s level is higher than the user-set level.
Analog: Sound that has not been turned into
numbers.Analog sound varies, while digital sound
has specific numerical values.These jacks send
audio through two channels, the left and right.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing without data
compression.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventionalTVs. is
4:3, and that of wide-screens is 16:9.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for
reproduction control. By using screen menus
recorded on aVideo CD or SVCD that supports
PBC, you can enjoy interactive-type software as
well as software having a search function.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV set, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
second, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate better
the sound quality. However, higher bit rates use
more space on a Disc.
Region code: A system allowing discs to be
played only in preset regions.This unit will only
play discs that have compatible region codes.You
can find the region code of your unit from the
product label. Some discs are compatible with
more than one region (or ALL regions).
Chapter: Sections of a picture or a music
piece on a DVD that are smaller than titles.A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
S-Video: Produces a clear picture by sending
separate signals for luminance and the color.You
can use S-Video only if yourTV set has S-Video
In jack.
Sampling Frequency: Frequency of data
sampling when analog data is converted to
digital data. Sampling frequency numerically
represents how many times the original analog
signal is sampled per second.
Disc menu: A screen display prepared for the
selection of images, sound, subtitles, multi-angles,
etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available when
you use the DIGITAL AUDIO OUT COAXIAL
or OPTICAL jacks.These jacks send audio
through multiple channels, instead of just two
channels as analog does.
Surround: A system for users to create
realistic three-dimensional sound fields full of
realism by arranging multiple speakers around
the listener.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or
the entire album in audio software. Each title is
assigned a title number enabling you to locate
the title you want.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up
to six channels of digital audio (front left and
right, surround left and right and center).
JPEG: A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video toTV.
MP3: A file format with a sound data
compression system,“MPE” is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3.Through the MP3 format, one
CD-R or CD-RW can contain about 10 times as
much data volume as a regular CD can.
Multichannel: DVD is specified to have all
sound tracks constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
Parental control: A function of the DVD to
limit playback of the disc by the age of the users
according to the limitation level in each country.
The limitation varies from disc to disc; when it is
37
|