Rwegwistewr yo.uprhproildiupctsan.dcgoetmsup/pworteatlcome
HTS3530
EN
User manual
MS-MY Manual pengguna
=+ꢀ7:ꢁ Ԛ͂ʹ˫ꢀ
ꢀ
=+ꢀ&1ꢁ Ⴌ
߀ ൱Ҭꢀ ꢀ
8 Product speciꢀcations
9 Troubleshooting
10 Index
15
16
18
Contents
1 Notice
2
2
2
2
Copyright
About Progressive Scan
Trademarks
2 Important
Safety
3
3
3
Product care
3 Your home theater
Main unit
4
4
5
Remote control
4 Connect your home theater
Connectors
6
6
7
8
8
Connect to theTV
Connect audio fromTV or other devices
Connect a microphone
5 Use your home theater
Before you start
8
8
Choose your sound
Play a disc
8
9
Play from a USB storage device
More play features for disc or USB
Play from radio
Play audio fromTV or other devices
Create MP3 audio ꢀles
10
10
11
11
11
6 Change settings
Access the setup menu
Change general settings
Change audio settings
Change video settings
Change preference settings
12
12
13
13
13
14
7 Update software
14
14
14
Check software version
Update software from a CD-R or USB
EN
1
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certiꢀed device must be registered in
order to play DivX Video-on-Demand (VOD)
content. To generate the registration code,
locate the DivX VOD section in your device
setup menu. Go to vod.divx.com with this code
to complete the registration process and learn
more about DivX VOD.
1 Notice
Copyright
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
About Progressive Scan
Consumers should note that not all high deꢀnition
television sets are fully compatible with this
HDMI, and HDMI logo, and High-Deꢀnition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
product and may cause artifacts to be displayed in
the picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard deꢀnition’
output. If there are questions regarding ourTV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
Trademarks
CLASS 1
LASER PRODUCT
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
DivX , DivX Certiꢀed and associated logos
are registered trademarks of DivX, Inc. and are
used under license.
ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, Inc. This is an ofꢀcial
DivX Certiꢀed device that plays DivX video.
software tools to convert your ꢀles into DivX
video.
2
EN
•
•
Never place the product or any objects
on power cords or on other electrical
equipment.
2 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Do not touch the disc optical lens inside the
disc compartment.
•
•
Safety
Risk of electric shock or ꢀre!
Risk of overheating!
•
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
Never install this product in a conꢀned
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaline, etc.).
•
Never place the product and accessories
near naked ꢁames or other heat sources,
including direct sunlight.
•
Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
•
Batteries contain chemical substances, they
should be disposed of properly.
Product care
•
•
•
•
•
Do not insert any objects other than discs
into the disc compartment.
Do not insert warped or cracked discs into
the disc compartment.
Risk of short circuit or ꢀre!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
•
Only use microꢀber cloth to clean the
product.
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on ꢁat, level surfaces that can support the
combined weight of the speaker and stand.
•
EN
3
Disposal of your old product and
batteries
3 Your home theater
Congratulations on your purchase, and welcome
to Philips!To fully beneꢀt from the support that
Philips offers, register your home theater at www.
philips.com/welcome.
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused.
Main unit
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
a Disc compartment
b
c
d
(Open/Close)
Opens or closes the disc compartment.
(Play/Pause)
Starts, pauses or resumes play.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
(Stop)
•
•
Stops play.
In radio mode, erases the current
preset radio station.
e
(Standby-On)
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
Switches the home theater on or to
standby.
f SOURCE
Selects an audio/video source for the home
theater.
g
/
•
•
Skips to the previous or next track,
chapter or ꢀle.
In radio mode, selects a preset radio
station.
h Display panel
i Volume control wheel
4
EN
a
b
(Standby-On)
Remote control
Switches the home theater on or to
standby.
OPEN/CLOSE
Opens or closes the disc compartment.
a
c REPEAT / PROGRAM
b
c
d
•
•
Selects or turns off repeat mode.
In radio mode, program radio stations.
u
t
d
e
SETUP
Accesses or exits the setup menu.
(Navigation buttons)
Navigate menus.
In video mode, press left or right to
fast backward or fast forward.
In radio mode, press left or right to
search a radio station; press up or
down to ꢀne tune a radio frequency.
•
•
e
•
f
g
s
r
f
INFO
Displays information about what is playing.
g Playback buttons
Control playback.
h
i
h SURR (Surround Sound)
Switches to surround sound or stereo
sound.
q
p
i AUDIO SYNC
•
•
Selects an audio language or channel.
Press and hold to synchronize audio
with video. Use with +/-.
j
o
n
k
l
m
j Numeric buttons
Selects an item to play.
k SUBTITLE
Selects subtitle language for video.
l VOCAL
Turns off or on the vocal by changing the
audio channel.
m MIC VOL +/-
Increases or decreases microphone volume.
n KARAOKE
Toggles through various karaoke options.
o CREATE MP3 / ZOOM
•
•
Accesses the menu to create MP3.
Zooms into a video scene or picture.
p SOUND
Selects a sound mode.
EN
5
q VOL +/-
Increases or decreases volume.
4 Connect your home
theater
This section helps you connect your home theater
to aTV and other devices.The basic connections
of the home theater with its accessories are
provided in the Quick Start. For a comprehensive
philips.com.
r
(Mute)
Mutes or restores volume.
s
BACK
Returns to a previous menu screen.
t OK
Conꢀrms an entry or selection.
u Source buttons
•
AUDIO SOURCE: Selects an audio
input source.
Note
•
•
•
RADIO: Switches to FM radio.
USB: Switches to USB storage device.
DISC: Switches to disc source.
• Refer to the type plate at the back or bottom
of the product for identiꢀcation and supply
ratings.
• Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
Connectors
Connect other devices to your home theater.
Side connectors
MIC
a
(USB)
Audio, video or picture input from a USB
storage device.
b MIC
Audio input from a microphone.
Back connectors
a AC MAINS~
Connects to the power supply.
6
EN
b SPEAKERS
Option 2: Connect to theTV through
YPbPr (component video)
Connects to the supplied speakers and
subwoofer.
c HDMI OUT
Note
Connects to the HDMI input on the TV.
• The component video cable or connector
d VIDEO OUT-VIDEO
Connects to the composite video input on
the TV.
might be labeled Y Cb Cr or YUV.
(Cable not supplied)
e AUDIO IN-AUX
Connects to the analog audio output on the
TV or an analog device.
ComponentVideo Out
TV
f FM ANTENNA
Connects the FM antenna for radio
reception.
ComponentVideo In
g COMPONENT VIDEO OUT-Y Pb Pr
Connects to the component video input on
the TV.
Connect to theTV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
a HDMI
Option 3: Connect to theTV through
composite video (CVBS)
b Component video
c Composite video
Note
Option 1: Connect to theTV through
HDMI
• The composite video cable or connector might
be labeled AV IN, VIDEO IN, COMPOSITE or
BASEBAND.
Note
• If the HDTV has a DVI connector, connect
using an HDMI/DVI adapter.
TV
(Cable not supplied)
TV
EN
7
Connect audio fromTV or
other devices
5 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Use your home theater to play audio from the
TV or other device such as a cable box.
Tip
Before you start
• Press AUDIO SOURCE to select the audio
output of your connection.
Check that you:
•
Make the necessary connections and
complete the setup as described in the
Quick Start.
Switch the TV to the correct source for the
home theater.
•
TV
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Connect a microphone
Change sound mode
Select predeꢀned sound modes to suit your
video or music.
(Microphone not supplied)
Press SOUND repeatedly to cycle through the
available sound modes.
Sound mode Description
ACTION /
ROCK
Enhanced low and high-range.
Ideal for action movies and rock
or pop music.
DRAMA /
JAZZ
Clear mid and high-range. Ideal
for drama movies and jazz music.
CONCERT/ Neutral sound. Ideal for live
CLASSIC
SPORTS
concerts and classical music.
Moderate mid-range and surround
effects for clear vocals and the
atmosphere of a live sport venue.
NIGHT
Dynamically controlled sound
mode suitable for watching
movies at night or for non-
intrusive background music.
8
EN
Change surround sound mode
Use video options
Experience an immersive audio experience with
surround sound modes.
Access several useful features while viewing
video.
Note
• Available video options depend on the video
source.
Press SURR repeatedly to cycle through the
Button
Action
available surround modes.
Searches slow-backward or
slow-forward. Press repeatedly to
change the search speed.
/
Option
Description
MULTI-
Immersive multi-channel
For VCD/SVCD, slow-backward
CHANNEL sound for an enhanced movie
search is not available.
experience.
AUDIO
SYNC
Selects an audio language or
channel.
STEREO
Two-channel stereo sound. Ideal
for listening to music.
SUBTITLE Selects subtitle language for video.
Displays information about what
is playing.
INFO
Play a disc
REPEAT
Repeats a chapter or title.
The home theater can play a wide variety of
discs, including video, audio and mixed media (for
example, a CD-R that contains JPEG pictures and
MP3 music).
Use picture options
Access several useful features while viewing
pictures.
1 Insert a disc into the home theater.
2 Press DISC.
Button
Action
» The disc plays or the disc main menu
appears.
Flips the photo vertically or
horizontally.
/
3 Press the following buttons to control play:
Rotates the picture counter-
clockwise or clockwise.
/
Button
Action
Skips to the previous or next
/
Navigation
Navigate menus.
picture.
buttons
REPEAT
INFO
Repeats a single ꢀle in the folder
or repeats the entire folder.
Displays photo albums in a
thumbnail overview.
OK
Conꢀrms an entry or selection.
Starts, pauses or resumes play.
Stops play.
Skips to the previous or next
track, chapter or ꢀle.
/
/
Fast backwards or fast
Use audio options
Access several useful features while audio is
played.
forwards. Press repeatedly to
change the search speed.
ZOOM
Zooms into a video scene or
picture.
Button
Action
REPEAT
Repeats a track or the
entire disc.
EN
9
Use karaoke options
Access several useful features while playing
karaoke disc.
Note
• If the USB storage device does not ꢀt into the
connector, use a USB extension cable.
• The home theater does not support digital
cameras that need a computer program to
display photos.
Note
• Ensure that a microphone (not supplied) is
connected to the MIC connector on this home
theater before play.
• The USB storage device must be FAT or DOS-
formatted, and Mass Storage Class compliant.
• Set the microphone volume to the minimum
level before connecting the microphone to
prevent howling.
More play features for disc or
USB
Button
Action
Several advanced features are available for video
or picture playback from a disc or USB storage
device.
KARAOKE Toggles through various karaoke
options.
[Mic On]/[Mic Off] – Press
to turn on or off the microphone
output.
Play a musical slideshow
Play music and pictures simultaneously to create
a musical slideshow. The ꢀles must be stored on
the same disc or USB storage device.
[Vol 20] – Press
to set the
default microphone volume level.
[Echo +15] – Press
echo level.
to set the
to set the
[Key +00] – Press
1 Select a music track, then press OK.
pitch level that match your voice.
2 Press
BACK and go to the picture
[karaoke scoring] – Press
to
folder.
set karaoke scoring when playback
a DVD or VCD.
3 Select a picture, then press OK to start
slideshow.
MIC VOL Increases or decreases
+/-
microphone volume.
4 Press to stop slideshow.
VOCAL
Turns off or on the vocal by
changing the audio channel.
5 Press again to stop music.
Synchronize audio with video
If the audio and video are not synchronized, you
can delay the audio to match the video.
Play from a USB storage device
The home theater is ꢀtted with a USB connector
that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
1 Press and hold AUDIO SYNC until the
audio sync message appears on the display
panel.
1 Connect the USB storage device to the
2 Press +/- within ꢀve seconds to sync the
home theater.
audio with your video.
2 Press USB.
» A content browser appears.
Quick skip play to a speciꢀc time
Quick skip to a speciꢀc part of a video by
entering the time of a scene.
3 Select a ꢀle, then press OK.
4 Press the playback buttons to control play
(see ‘Play a disc’ on page 9).
1 During video play, press INFO.
2 Press the Navigation buttons and OK to
select:
10 EN
•
•
•
•
[TT Time] : Title time.
[Ch Time] : Chapter time.
[Disc Time] : Disc time.
[Track Time] : Track time.
Note
• AM and digital radio are not supported.
• If no stereo signal is detected, you are
prompted to install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
3 Enter the time of the scene, then press OK.
Repeat play a speciꢀc section
Select sections of audio or video for repeat
playback.
Change tuning grid
1 During playback, press INFO.
2 Select [Repeat AB] in the menu.
3 Press OK to mark the start point.
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1 Press RADIO.
4 Press OK again to mark the end point.
2 Press .
» Repeat play starts.
3 Press and hold
until ‘GRID 9’ (50 kHz)
•
To cancel repeat A-B, press INFO, select
[Repeat AB] > [Off], then press OK.
or ‘GRID 10’ (100 kHz) is displayed.
Note
Play audio fromTV or other
devices
• Repeat play is only possible within a track/
chapter.
Press AUDIO SOURCE repeatedly to select
the audio output of the connected device (see
‘Connect audio from TV or other devices’ on
page 8).
Play from radio
The home theater can store up to 40 radio
stations.
Create MP3 audio ꢀles
1 Check that the FM antenna is connected.
2 Press RADIO.
Use the home theater to convert audio CDs into
MP3 audio ꢀles.
» “AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
1 Insert an audio CD (CDDA/HDCD) into
installed any radio stations. Press
.
the home theater.
3 Press the following buttons to control play:
2 Connect a USB storage device to the home
theater.
Button
Action
3 When audio is played, press CREATE MP3.
Selects a preset radio station.
Searches for a radio station.
Fine tunes a radio frequency.
/
/
4 Select [Yes] and press OK to conꢀrm.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for ꢀve
seconds to reinstall radio stations.
EN 11
CREATE MP3
6 Change settings
TRACK
OPTIONS
This section helps you to change the settings of
your home theater.
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
128kbps
CRT ID3
Device
Yes
Caution
USB1
• Most of the settings are already conꢀgured
with the best value for the home theater.
Unless you have a speciꢀc reason to change a
setting, it is best to leave it at the default value.
SUMMARY
Select Track
Time
0
00:00
Select All
Start
Exit
Deselect All
Access the setup menu
5 Select the settings in the [OPTIONS] panel,
then press OK.
1 Press SETUP.
•
•
•
•
[Speed] : Selects the write-to-ꢀle
speed.
» The following menu appears.
[Bitrate] : Selects the conversion
quality.
Symbol
Description
[CRT ID3] : Copies information on the
tracks in the MP3 ꢀles.
[General Setup]
[Device] : Selects the USB device
[Audio Setup]
which you use to store the MP3 ꢀles.
6 Press to access the [TRACK] panel.
7 Select an audio track, then press OK.
[Video Setup]
•
•
[Select All] : Selects all tracks.
[Deselect all] : De-selects all tracks.
[Preference Setup]
8 Select [Start] in the menu to convert, then
press OK.
» A new folder is created in the USB
storage device to store all the new MP3
audio ꢀles.
2 Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
•
To exit the menu, select [Exit] and
press OK.
3 Press
BACK to return to the previous
menu, or press SETUP to exit.
Note
• During the conversion process, do not press
any buttons.
Note
• DTS CDs and copy-protected CDs cannot be
converted.
• You cannot change a setting that is grayed out.
• Write-protected or password-protected USB
storage device cannot be used to store MP3
ꢀles.
12 EN
•
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
[Audio Sync] : Sets a delay for audio
output when you play a video disc.
Change general settings
1 Press SETUP.
2 Select [General Setup], then press OK.
3 Select and adjust the following settings:
4 Press OK to conꢀrm your choice.
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
Note
• For settings related to HDMI, the TV must be
connected through HDMI.
•
•
•
[Display Dim] : Changes the brightness
of the display panel.
[OSD Language] : Selects the on-
screen display menu language.
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a speciꢀc time.
[Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
[DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
Change video settings
1 Press SETUP.
2 Select [Video Setup], then press OK.
3 Select and adjust the following settings:
•
•
•
•
•
•
•
•
[TV System] : Selects a TV system that
is compatible with the TV.
[TV Display] : Selects a picture display
format to ꢀt the TV screen.
[Progressive] : Enables or disables
progressive scan mode.
[Picture Settings] : Selects a
predeꢀned color setting.
•
[HD JPEG] : Enables or disables display
of high deꢀnition JPEG images.
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
4 Press OK to conꢀrm your choice.
Note
• Before you purchase DivX videos and play
them on the home theater, register the home
VOD code.
4 Press OK to conꢀrm your choice.
Note
• The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
Change audio settings
1 Press SETUP.
• For settings related to HDMI, the TV must be
connected through HDMI.
2 Select [Audio Setup], then press OK.
3 Select and adjust the following settings:
• For settings related to progressive or
component video, the TV must be connected
through Component Video.
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
[Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
•
EN 13
Change preference settings
7 Update software
1 Press SETUP.
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
2 Select [Preference Setup], then press OK.
3 Select and adjust the following settings:
•
•
•
•
[Audio] : Selects audio language for
video.
[Subtitle] : Selects subtitle language for
video.
Check software version
[Disc Menu] : Selects menu language
for video disc.
[Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
1 Press SETUP.
2 Select [Preference Setup] > [Version Info.],
then press OK.
» The software version is displayed.
•
•
•
[PBC] : Displays or skips the content
menu for VCD and SVCD discs.
[MP3/JPEG Display] : Displays the
MP3/JPEG folders or all the ꢀles.
[Password] : Sets or changes a PIN
code to play a restricted disc. Enter
‘0000’ if you do not have a PIN or if
you have forgotten your PIN.
[DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
[Version Info.] : Displays the software
version for the home theater.
[Default] : Resets the home theater to
the default settings programmed at the
factory.
Update software from a CD-R
or USB
1 Check for the latest software version on
•
Search for your model and click on
‘software&drivers’.
•
•
•
2 Download the software onto a CD-R or
USB storage device.
3 Insert the CD-R or connect the USB
storage device to the home theater.
4 Follow the instructions on the TV to
4 Press OK to conꢀrm your choice.
conꢀrm the update.
» When complete, the home theater
automatically switches off and on again.
Note
•
If not, disconnect the power cord for a few
seconds and then reconnect it.
• If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
Caution
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
• Do not turn off the power or remove the
CD-R or USB storage device when the
software update is in progress because you
might damage the home theater.
• You cannot reset disc lock, password (PIN
code) and parental control settings to their
default values.
14 EN
Video
8 Product
specifications
•
•
Signal system: PAL / NTSC
HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p
Audio
•
Sampling frequency:
Note
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
WMA: 44.1 kHz, 48 kHz
• Speciꢀcation and design are subject to change
without notice.
•
•
Constant bit rate:
•
MP3: 112 kbps - 320 kbps
WMA: 64 kbps - 192 kbps
Region code
•
The type plate on the back or bottom of the
Radio
•
home theater shows which regions it supports
Tuning range: FM 87.5-108 MHz (50/100
kHz)
Country
Europe, United Kingdom
DVD
•
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 180 Hz-10 kHz
•
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage
Class)
Asia Pacific, Taiwan, Korea
Latin America
•
•
File system: FAT12, FAT16, FAT32
Maximum memory support: < 160GB
Main Unit
•
Power supply:
•
Australia, New Zealand
Russia, India
Latin America/Asia Paciꢀc: 110-
127V/220-240V, ~50-60Hz switchable
China/Russia/India: 220-240V, ~50Hz
•
•
•
•
Power consumption: 100 W
Standby power consumption: ꢂ 0.9 W
Dimensions (WxHxD): 360 x 58 x 320
China
(mm)
•
Weight: 2.84 kg
Subwoofer
Playback media
•
•
•
•
Impedance: 8 ohm
Speaker drivers: 165 mm (6.5”) woofer
Frequency response: 20 Hz-150 Hz
Dimensions (WxHxD): 122.6 x 307 x 369
(mm)
Weight: 3.84 kg
Cable length: 3 m
DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R
DL, CD-R/CD-RW,Audio CD,Video CD/SVCD,
Picture CD, MP3-CD,WMA-CD, DivX-CD, USB
storage device
File Format
•
•
•
•
•
Audio: .mp3, .wma
Video: .divx, .divx ultra, .mpeg, .mpg
Picture: .jpeg, .jpg
Ampliꢀer
•
Total output power: 600 W RMS (30%
THD)
•
•
Frequency response: 20 Hz-20 kHz
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
•
Input sensitivity:
•
AUX: 2 V
EN 15
Speakers
9 Troubleshooting
•
•
System: full range satellite
Speaker impedance: 8 ohm (center), 4 ohm
(Front/Rear)
Warning
•
•
•
Speaker drivers: 3” full range
Frequency response: 150 Hz-20 kHz
Dimensions (WxHxD):
• Risk of electric shock. Never remove the
casing of the product.
•
•
•
Center: 160.9 x 95 x 92 (mm)
Front: 95 x 160.9 x 87 (mm)
Rear: 254 x 1001.5 x 254 (mm)
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the back
or bottom of your product.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
•
•
Weight:
•
•
•
Center: 0.77 kg
Front: 0.56 kg/each
Rear: 3.25 kg/each
Cable length:
•
•
•
Center: 2 m
Front: 3 m
Rear: 10 m
Laser speciꢀcation
•
•
Type: Semiconductor laser GaAIAs (CD)
Wave length: 645 - 665 nm (DVD), 770 -
800 nm (CD)
Output power: 6 mW (DVD), 7 mW
(VCD/CD)
Beam divergence: 60 degrees.
Main unit
•
•
The buttons on this home theater do not work.
•
Disconnect the home theater from the
power outlet for a few minutes, then
reconnect.
Picture
No picture.
•
Ensure that the TV is switched to the
correct source for this home theater.
•
If this happens when you change the TV
system, switch to its default mode: 1) Press
to open the disc compartment. 2) Press
the Numeric buttons’3’.
If this happens when you switch on the
progressive scan mode, switch to its
default mode: 1) Press to open the
disc compartment. 2) Press the Numeric
buttons’1’.
•
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace
with a new HDMI cable.
•
If this happens when you change the HDMI
video resolution, switch to its default mode:
1) Press to open the disc compartment.
2) Press the Numeric buttons ‘1’.
16 EN
The contents of a USB storage device cannot be
read.
Sound
No sound.
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see ‘Product speciꢀcations’ on page 15).
•
Ensure that the audio cables are connected
and select the correct input source (for
example, AUDIO SOURCE) for the device
you want to play.
•
Ensure that the USB storage device
is formatted with a ꢀle system that is
supported by the home theater (note that
NTFS is not supported).
No sound on HDMI connection.
•
You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
‘No entry’ or ‘x’ sign appears on theTV.
•
The operation is not possible.
•
Ensure that the [HDMI Audio] is enabled.
No sound fromTV program.
•
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV, then press AUDIO
SOURCE repeatedly to select the correct
audio source.
Distorted sound or echo.
•
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
Audio and video are not synchronized.
•
1) Press and hold AUDIO SYNC. 2) Press
+/- within ꢀve seconds.
Play
Disc cannot be played.
•
•
Clean the disc.
Ensure that the home theater supports the
disc (see ‘Product speciꢀcations’ on page
15).
•
•
Ensure that the home theater supports the
region code of the DVD.
For DVD RW or DVD R, ensure that the
disc is ꢀnalized.
DivX video ꢀles cannot be played.
•
Ensure that the DivX ꢀle is encoded
according to the ‘Home Theater Proꢀle’
with the DivX encoder.
•
Ensure that the DivX video ꢀle is complete.
DivX subtitles do not display correctly.
•
Ensure that the subtitle ꢀle name is the
same as the movie ꢀle name.
•
Select the correct character set: 1) Press
SETUP. 2) Select [Preference Setup].
3) Select [DivX Subtitle]. 4) Select a
supported character set. 5) Press OK.
EN 17
M
10 Index
MP3
create MP3 ꢀles
11
A
ampliꢀer
audio
15
O
connection
language
8
14, 9
13
overview
connectors
6
4
5
settings
main unit
synchronize with video
10
remote control
C
P
care
3
password
picture
14
change settings
12
connect
slide show
10
16
audio from TV
guide
8, 11
troubleshooting
6
8
play
microphone
other devices
TV
disc
9
9
8
options
7
radio
11
17
10
3
connectors
contact us
6
troubleshooting
USB storage device
product care
product speciꢀcations
progressive scan
16
15
2
D
disc
play
9
15
4
supported discs
disposal of your product
DivX
R
radio
play
program
tune
11
11
subtitle
14
11
tuning grid
recycle
region code
remote control
repeat
11
F
4
ꢀle formats
15
15
5
9, 11
K
karaoke
microphone
8
L
language
audio
14
14
13
14
disc menu
on-screen display
subtitle
18 EN
S
safety
settings
audio
general
3
13
13
14
14
14
13
parental control
preferences
restore factory settings
video
slideshow
play musical slideshow
software
10
update
version
14
14
sound
mode
surround
8
9
17
troubleshooting
subtitle
language
9
T
time search video
troubleshooting
TV
10
16
audio from TV
connect
8, 11
7
U
USB
play
10
14
software update
V
video
options
9
13
10
settings
synchronize with audio
EN 19
EN
|