Philips DVP3721 User Manual
DVD VIDEO PLAYER  
DVP3120/DVP3721  
Thank you for choosing Philips.  
Need help fast?  
Read your User’s Manual first for quick tips that make using  
your Philips product more enjoyable.  
If you have read your instructions and still need assistance,  
you may access our online help at www.philips.com/support  
01-45_dvp3120_94_eng1.indd  
1
2007-01-29 4:40:57 PM  
Index  
English------------------------------------------6  
01-45_dvp3120_94_eng1.indd  
3
2007-01-29 4:44:27 PM  
General Information  
Environmental Information  
Laser Safety  
All unnecessary packaging has been  
omitted. The packaging has been made  
easy to separate into two materials;  
cardboard (box) and polyethylene (bags,  
protective foam sheet).  
This unit employs a laser. Due to possible  
eye injury, only a qualified service person  
should remove the cover or attempt to  
service this device.  
NOTE:  
Pictures shown maybe different  
between countries.  
Your DVD player consists of materials  
which can be recycled and reused if  
disassembled by a specialised company.  
Please observe the local regulations  
regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
CAUTION:  
WARNING LOCATION: ON THE  
BACKPLATE OF THE SET  
NEVER MAKE OR CHANGE  
CONNECTIONS WITH THE  
POWER SWITCHED ON.  
Manufactured under license from  
Dolby Laboratories, “Dolby”  
and the double-D symbol are  
trademarks of Dolby Laboratories.  
Windows Media and the Windows logo  
are trademarks, or registered  
trademarks of Microsoft Corporation  
in the United States and/or other  
countries.  
Specifications are subject to change without  
notice. Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners.  
For Customer Use:  
LASER  
Read carefully the information located at  
the bottom or rear of your DVD Video  
player and enter below the Serial No.  
Retain this information for future  
reference.  
Type  
Semiconductor laser  
InGaAlP (DVD)  
AIGaAs (CD)  
658 nm (DVD)  
790 nm (CD)  
Wave length  
Output Power 7.0 mW (DVD)  
10.0 mW (VCD/CD)  
Beam divergence 60 degrees  
Model No. DVP 3120/DVP3721  
Serial No. ___________________  
4
01-45_dvp3120_94_eng1.indd  
4
2007-01-29 4:41:04 PM  
Language Code  
5
01-45_dvp3120_94_eng1.indd  
5
2007-01-29 4:41:05 PM  
Contents  
Care and Safety Information  
Setup.............................................................................................................................................................8  
Cleaning discs.............................................................................................................................................8  
General Information  
Accessories supplied ................................................................................................................................9  
Region codes...............................................................................................................................................9  
Connections  
Connecting to television......................................................................................... 10~11  
Using Composite Video jacks (CVBS).............................................................................................. 10  
Using Component Video jacks (YPbPr)........................................................................................... 10  
Using an accessory RF modulator ......................................................................................................11  
Connecting the power cord...........................................................................................12  
Optional connections  
Connecting to a stereo system.....................................................................................13  
Stereo system has right/left Audio In jacks .................................................................................... 13  
Connecting to a digital AV receiver.............................................................................13  
Receiver has a PCM, Dolby Digital or MPEG decoder................................................................ 13  
Product Overview  
Front and Rear panels....................................................................................................14  
Remote Control............................................................................................................. 15  
Getting Started  
Step 1: Inserting Batteries.............................................................................................16  
Using the remote control to operate the system......................................................................... 16  
Step 2: Finding your viewing channel...........................................................................16  
Step 3: Setting up Progressive Scan feature...............................................................17  
Step 4: Selecting the matching color system ............................................................ 18  
Step 5: Setting the language .........................................................................................19  
On-screen display (OSD) language.................................................................................................... 19  
Audio, Subtitle and Disc menu languages........................................................................................ 19  
Playback from Disc  
Playable discs.................................................................................................................. 20  
Supported formats.................................................................................................................................20  
Playback Features  
Starting disc playback ................................................................................................... 21  
Basic playback controls................................................................................................. 21  
Pausing playback...................................................................................................................................... 21  
Selecting title/chapter/track................................................................................................................ 21  
Stopping playback................................................................................................................................... 21  
Operations for video playback..................................................................................... 22  
Using the Disc Menu .............................................................................................................................22  
Zooming in...............................................................................................................................................22  
Resuming playback from the last stopped point............................................................................22  
Slow Motion.............................................................................................................................................22  
Forward / Reverse Searching..............................................................................................................22  
Selecting various repeat functions .................................................................................................23  
Repeat play mode...................................................................................................................................23  
Repeating a section within a chapter/track.....................................................................................23  
6
01-45_dvp3120_94_eng1.indd  
6
2007-01-29 4:41:05 PM  
Contents  
Viewing the disc playback information.................................................................24~25  
Using the OSD menu ............................................................................................................................ 24  
Title/Chapter/Track selection ............................................................................................................ 24  
Time Search............................................................................................................................................. 24  
Audio/Subtitle.......................................................................................................................................... 24  
Angle.......................................................................................................................................................... 24  
Time Display......................................................................................................................................24-25  
Preview......................................................................................................................................................25  
Viewing Audio CD playback information................................................................... 25  
Disc Go To / Track Go To / Track Selection..................................................................................25  
Special DVD Features................................................................................................... 26  
Playing a Title...........................................................................................................................................26  
Changing the Audio Language.............................................................................................................26  
Subtitles.....................................................................................................................................................26  
Special VCD and SVCD Feature.................................................................................. 26  
Playback Control (PBC)........................................................................................................................26  
Playing MP3/WMA/JPEG Picture CD ...................................................................27~28  
General Operation................................................................................................................................ 27  
Playback selection .................................................................................................................................. 27  
Playback with multi-angles (JPEG).....................................................................................................28  
Preview Function (JPEG)......................................................................................................................28  
Zoom picture (JPEG) ............................................................................................................................28  
Playing MP3/WMA music and JPEG picture simultaneously.......................................................28  
DVD Menu Options  
Using the General setup menu..............................................................................29~30  
Locking / Unlocking the disc for viewing.........................................................................................29  
OSD Language.........................................................................................................................................29  
Sleep...........................................................................................................................................................30  
Volume ......................................................................................................................................................30  
Using the Audio setup menu.................................................................................. 31~33  
Analog Output ........................................................................................................................................ 31  
Digital Audio Setup.......................................................................................................................... 31-32  
Sound Mode............................................................................................................................................. 32  
Night Mode – turning on/off ............................................................................................................... 33  
Using the Video setup menu..................................................................................33~35  
TV Type.....................................................................................................................................................34  
Setting the TV Display..........................................................................................................................34  
Progressive...............................................................................................................................................34  
Picture Setting.........................................................................................................................................35  
Using the Preference setup menu.........................................................................36~38  
Subtitle / Audio / Disc Menu...............................................................................................................36  
Parental...............................................................................................................................................36-37  
PBC............................................................................................................................................................. 37  
MP3/JPEG Menu...................................................................................................................................... 37  
Changing the Password.........................................................................................................................38  
Restoring to the original settings.......................................................................................................38  
Others  
Software upgrade .......................................................................................................... 39  
Troubleshooting.......................................................................................................40~41  
Specifications ................................................................................................................. 42  
Glossary........................................................................................................................... 43  
7
01-45_dvp3120_94_eng1.indd  
7
2007-01-29 4:41:05 PM  
Care and Safety Information  
DANGER!  
High voltage! Do not open the  
device. You run the risk of getting  
an electric shock.  
Cleaning discs  
Some problems occur because the disc  
inside the player is dirty (frozen picture,  
sound disruptions, picture distortions).  
To avoid these problems, discs should be  
cleaned on a regular basis.  
The machine does not contain any  
user-serviceable parts. Please leave  
all maintenance work to qualified  
personnel.  
To clean a disc, use a micro fibre cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
Setup  
Finding a suitable location  
– Place the set on a flat, hard and stable  
surface. Do not place the set on a  
carpet.  
– Do not put any equipment or heavy  
objects on top of the set.  
– Do not position the set on top of  
other equipment that might heat it up  
(such as receiver or amplifier).  
– Do not put anything under the set  
(such as CDs, magazines).  
– Install this unit near the AC outlet and  
where the AC power plug can be  
reached easily.  
CAUTION!  
Do not use solvents such as benzene,  
thinner, commercially available cleaners,  
or anti-static sprays intended for analog  
discs. Since the optical unit (laser) of the  
DVD player operates at a higher power  
than regular DVD or CD players,  
cleaning CDs intended for DVD or CD  
players may damage the optical unit  
(laser). Therefore, refrain from using a  
cleaning CD.  
Space for ventilation  
– Place the apparatus in a location with  
adequate ventilation to prevent  
internal heat build up. Allow at least  
10 cm (4.0”) clearance from the rear  
and the top of the set and 5cm (2.0”)  
from the left and right to prevent  
overheating.  
5cm (2.0")  
10cm (4.0")  
10cm (4.0")  
5cm (2.0")  
Avoid high temperatures, moisture,  
water and dust  
– Apparatus shall not be exposed to  
dripping or splashing.  
– Do not place any sources of danger  
on the apparatus (such as liquid filled  
objects, lighted candles).  
8
01-45_dvp3120_94_eng1.indd  
8
2007-01-29 4:41:05 PM  
General Information  
Accessories supplied  
Region codes  
This DVD player is designed to support  
the Region Management System. Check  
the regional code number on the disc  
package. If the number does not match  
the player’s region number (see table  
below), the player may be unable to  
playback the disc.  
Composite  
video cable  
(yellow) and  
Audio cables  
(white, red)  
Tips:  
– It may not be possible to play CD-R/RW  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
– If you are having trouble playing a certain  
disc, remove the disc and try a different one.  
Improper formatted disc will not played on  
this DVD player.  
DISC  
MENU  
DISPLAY  
Remote  
control and  
two AAA  
batteries  
Discs that can  
be played  
Region  
RETURN  
TITLE  
SETUP  
NEXT  
PREV  
PLAY/PAUSE  
STOP  
MUTE  
U.S.A. and  
Canada regions  
ALL  
1
2
3
4
5
6
SUBTITLE  
ZOOM  
AUDIO  
U.K and  
Europe regions  
ALL  
ALL  
ALL  
ALL  
ALL  
Asia Pacific,  
Taiwan, Korea  
Australia,  
New Zealand,  
Latin America  
Russia and  
India regions  
China, Calcos Islands,  
Walls and Futuna  
Islands  
9
01-45_dvp3120_94_eng1.indd  
9
2007-01-29 4:41:05 PM  
Connections  
Connecting to television  
COMPONENT  
COMPONENT  
VIDEO IN  
VIDEO IN  
S-VIDEO  
IN  
S-VIDEO  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
V
U
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
(Pb/Cb)  
VIDEO IN  
VIDEO IN  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
COMPONENT  
VIDEO IN  
Y
V
U
(Pr/Cr)  
AUDIO  
OUT  
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
OUT  
(Pb/Cb)  
V
I
D
E
O
I
N
(Pb/Cb)  
Y
V
I
D
E
O
I
N
Y
1
2
1
2
IMPORTANT!  
IMPORTANT!  
– You only need to make one video  
connection from the following  
options, depending on the  
capabilities of your television.  
– Connect the DVD player directly  
to the television.  
– The progressive scan video quality  
is only possible when using YPbPr  
and a progressive scan television is  
required.  
Using ComponentVideo jacks  
(YPbPr)  
Using CompositeVideo jacks  
(CVBS)  
A Use the component video cables (red/  
blue/green) to connect the DVD player’s  
YPbPr jacks to the component video  
input jacks (or labeled as YPbPr) on the  
television (cable not supplied).  
A Use the composite video cable (yellow)  
to connect the DVD player’s TV OUT  
(CVBS) jack to the video input jack (or  
labeled as A/V In, Video In, Composite or  
Baseband) on the television (cable  
supplied).  
B To hear sound of this DVD player  
through your television, use the audio  
cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD player to  
the corresponding AUDIO IN jacks on  
the television (cable supplied).  
B To hear sound of this DVD player  
through your television, use the audio  
cables (white/red) to connect AUDIO  
OUT (L/R) jacks of the DVD player to  
the corresponding AUDIO IN jacks on  
the television (cable supplied).  
C Proceed to page 17 for detailed  
progressive scan setup.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
10  
01-45_dvp3120_94_eng1.indd 10  
2007-01-29 4:41:06 PM  
Connections (continued)  
RF coaxial cable to TV  
2
Back of RF Modulator  
(example only)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH4  
1
IMPORTANT!  
C To hear sound of this DVD player  
through your TV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD player to the  
corresponding AUDIO IN jacks on the  
RF modulator (cable supplied).  
– If your television only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the  
DVD playback on the television. See  
your electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
D Connect the Antenna or Cable TV  
service signal to the ANTENNA IN or RF  
IN jack on the RF modulator. (It may  
have been connected to your TV  
Using an accessory RF modulator  
previously. Disconnect it from the TV).  
A Use the composite video cable (yellow)  
to connect the DVD player’s TV OUT  
(CVBS) jack to the video input jack on  
the RF modulator.  
B Use the RF coaxial cable (not supplied) to  
connect ANTENNA OUT or TO TV jack  
on the RF modulator to the ANTENNA  
IN jack on the television.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
11  
01-45_dvp3120_94_eng1.indd 11  
2007-01-29 4:41:06 PM  
Connections (continued)  
Connecting the power cord  
DIGITAL  
OUT  
TV OUT  
COAXIA  
COMPONENT VIDEO OUT  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
When no disc is loaded, press  
STANDBY ON on the DVD player  
front panel.  
“– – –” may appear on the display  
panel.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
12  
01-45_dvp3120_94_eng1.indd 12  
2007-01-29 4:41:06 PM  
Optional connections  
Connecting to a stereo  
system  
Connecting to a digital AV  
receiver  
OPTICAL  
AUDIO  
IN  
Receiver has a PCM, Dolby Digital  
or MPEG decoder  
Stereo system has right/ left Audio  
In jacks  
A Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on your television.  
A Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on your television.  
B Connect the COAXIAL jack of the DVD  
player to the corresponding Digital Audio  
In jack on your receiver (cable not  
supplied).  
B Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of the  
DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable supplied).  
C Set the DVD player’s digital output to  
PCM-Only or ALL depending on the  
capabilities of your receiver (see page 32  
{Digital Output}).  
Tip:  
– If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
TIPS: Before making or changing any connections, make sure that all the devices are disconnected  
from the power outlet.  
13  
01-45_dvp3120_94_eng1.indd 13  
2007-01-29 4:41:06 PM  
Product Overview  
Front and Rear Panels  
STANDBY ON 2  
–
Turns on the player or switches  
to standby mode  
STOP  
– Stops playback  
ꢀ
Disc Tray  
OPEN/CLOSE ç  
PLAY/PAUSE u  
–
Opens or closes the disc tray.  
– Starts or pauses playback.  
Display panel  
IR Sensor  
– Point the remote control towards  
this sensor  
–
Shows information about the  
current status of the DVD player.  
Mains ~ (AC Power Cord)  
Connect to a standard AC outlet  
–
Audio Out (Left/Right)  
– Connect to AUDIO inputs of an  
amplifier, receiver or stereo  
system  
TV OUT (CVBS)  
–
Connect to CVBS Video input of  
a television  
COAXIAL (Digital audio out)  
– Connect to coaxial AUDIO input  
of a digital audio equipment  
YPbPr (Component Video Out)  
–
Connect to YPbPr input of a  
television  
14  
01-45_dvp3120_94_eng1.indd 14  
2007-01-29 4:41:06 PM  
Product Overview (continued)  
Remote Control  
2
–
DISC MENU  
– Enters or exits the disc  
contents menu  
To switch the DVD player  
to standby mode or ON  
– Switches on or off the  
playback control mode (for  
VCD 2.0 only)  
DISPLAY  
Displays information on TV  
screen during playback  
–
OK  
– Confirms an entry or  
selection  
W X  
–
Cursor buttons for moving  
to the left or right, do a fast  
forward/reverse search.  
DISC  
RETURN/TITLE  
– To go back to previous  
menu/ show title menu  
DISPLAY  
MENU  
S T  
–
Cursor buttons for moving  
up/down, do a slow  
forward/backward  
PREV í  
– Skips to the previous title/  
chapter/ track  
RETURN  
TITLE  
SETUP  
NEXT  
SETUP  
Enters or exits the system  
setup menu  
PREV  
PLAY/PAUSE  
–
– Press and hold to fast  
backward  
STOP  
MUTE  
NEXT ë  
STOP  
– Stops playback  
ꢀ
–
Skips to the next title/  
chapter/track  
Press and hold to fast  
forward  
SUBTITLE  
ZOOM  
AUDIO  
u PLAY/PAUSE  
– Starts or pauses playback  
–
SUBTITLE  
– To access subtitle language  
system menu (DVD)  
MUTE  
Disables or enables sound  
output  
–
Alphanumeric keypad  
ZOOM  
– Enlarge a picture on the TV  
screen  
–
Selects numbered items in  
a menu  
VOLUME  
– Displays the current volume  
level  
AUDIO  
Selects an audio language  
–
(DVD/VCD) or an audio  
channel  
REPEAT/ REPEAT A-B  
– Selects various repeat mode  
– Repeats playback a specific  
section on a disc  
15  
01-45_dvp3120_94_eng1.indd 15  
2007-01-29 4:41:07 PM  
Getting Started  
Step 1 : Inserting Batteries  
Step 2 : Finding your viewing  
channel  
A Press STANDBY-ON 2 on the DVD  
player to turn it on.  
B Turn on the TV and set it to the correct  
video-in channel. You should see the blue  
DVD background screen.  
ꢁUsually these channel are between the  
lowest and highest channels and may  
be called FRONT, A/V IN, VIDEO.  
See your TV’s manual for more  
details.  
A Open the battery compartment.  
B Insert two batteries type R03 or AAA,  
following the indications (+ –) inside the  
compartment.  
ꢁOr, you may go to channel 1 on your  
TV, then press the Channel down  
button repeatedly until you see the  
Video In channel.  
ꢁOr, the TV remote control may have  
a button or turn that chooses  
different video modes.  
C Close the cover.  
CAUTION!  
– Remove batteries if they are  
exhausted or if the remote is not to  
be used for a long time.  
– Do not use old and new or  
different types of batteries in  
combination.  
ꢁOr, set the TV to channel 3 or 4 if  
you are using an RF modulator.  
– Batteries contain chemical  
substances, so they should be  
disposed of properly.  
C If you are using external equipment, (such  
as audio system or receiver), turn it on  
and select the appropriate input source  
for the DVD player output. Refer to the  
equipment user’s manual for detail.  
Using the remote control to  
operate the system  
DISC  
MENU  
DISPLAY  
RETURN  
TITLE  
SETUP  
NEXT  
PREV  
PLAY/PAUSE  
STOP  
MUTE  
A Aim the remote control directly at the  
remote sensor (IR) on the front panel.  
B Do not put any objects between the  
remote control and the DVD player  
while operating the DVD player.  
16  
01-45_dvp3120_94_eng1.indd 16  
2007-01-29 4:41:07 PM  
Getting Started (continued)  
G Select { On }, then press OK to confirm.  
Step 3 : Setting up  
ꢀThe menu will appear on the TV.  
Progressive Scan feature  
ACTIVATING PROGRESSIVE SCAN:  
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.  
3. IF THERE IS A DISTORTED PICTURE, WAIT  
15 SECONDS FOR AUTO RECOVERY.  
(for Progressive Scan TV only)  
The progressive scan displays twice the  
number of frames per seconds than  
interlaced scanning (ordinary normal TV  
system). With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
CANCEL  
OK  
H Press W to highlight { OK } and press  
OK to confirm.  
I Turn on your TV progressive scan mode  
(refer to your TV user manual).  
Before you start...  
– Ensure that you have connected this  
DVD player to a progressive scan TV  
using the YPbPr connection (see page  
10).  
ꢀThe menu will appear on the TV.  
CONFIRM AGAIN TO USE PROGRESSIVE  
SCAN. IF PICTURE IS GOOD,  
PRESS OK BUTTON ON REMOTE.  
– Ensure that you have completed the  
basic installation and setup.  
CANCEL  
OK  
A Turn on your TV and set to interlace  
J Press W to highlight { OK } and press  
OK to confirm.  
mode (refer to your TV user manual).  
B Press STANDBY-ON 2 on the  
remote control to turn on the DVD  
player.  
ꢀThe setup is now completed and you  
can start enjoy the high quality  
picture.  
C Select the correct video-in channel.  
To deactivate Progressive Scan  
manually:  
ꢀThe DVD background menu appears.  
D Press SETUP.  
ꢁWait for 15 seconds for the auto  
recovery.  
E Press X to select { Video Setup Page }.  
- - Video Setup Page - -  
OR  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
TV Type  
TV Display  
Progressive  
On  
Off  
B Press numeric keypad ‘1’ on the  
remote control for few seconds.  
Picture Setting  
ꢀThe DVD background screen appears.  
Tip:  
Set Progressive TV mode  
– There are some progressive scan TVs and  
High-Definition TVs that are not fully  
compatible with this unit, resulting in the  
unnatural picture when playing back a DVD  
VIDEO disc in the progressive scan mode. In  
such a case, turn off the progressive scan  
feature on both the DVD player and your TV.  
F Press S T repeatedly to select  
{ Progressive }, then press X.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
17  
01-45_dvp3120_94_eng1.indd 17  
2007-01-29 4:44:29 PM  
Getting Started (continued)  
E Select a setting and press OK.  
ꢁFollow the instructions show on the  
TV to confirm the selection.  
Step 4 : Selecting the  
matching color system  
The color system of the DVD player, disc  
and TV should match in order for the  
disc to play. Before changing the TV  
system, determine the color system of  
your TV.  
CHANGING NTSC TO PAL:  
1. ENSURE THAT YOUR TV SUPPORTS  
PAL STANDARD.  
2. IF THERE IS A DISTORTED PICTURE  
DISPLAYED ON THE TV, WAIT 15 SECONDS  
FOR AUTO RECOVER.  
OK  
CANCEL  
- - Video Setup Page - -  
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.  
OK CANCEL  
TV Type  
PAL  
TV Display  
Progressive  
Picture Setting  
Multi  
NTSC  
F Press W to highlight { OK } and press  
OK to confirm.  
Set TV Standard  
To reset to default TV colour  
system:  
A Press SETUP.  
ꢂWait for 15 seconds for the auto  
recovery.  
B Press X to select { Video Setup Page }.  
OR  
C Press S T repeatedly to select { TV  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
Type }, then press X.  
D Use S T to select one of the options  
B Press numeric keypad ‘3’ on the  
remote control for few seconds.  
below:  
{ PAL }  
ꢁThe DVD background menu appears.  
Select this if the connected TV has the  
PAL colour system. It will change the  
video signal of an NTSC disc and output  
it to PAL format.  
Tips:  
– Before changing the current TV colour  
setting, ensure that your TV supports the  
‘selected TV Type’ system.  
– If there is no proper picture on your TV,  
wait for 15 seconds for auto recovery.  
{ NTSC }  
Select this if the connected TV has the  
NTSC colour system. It will change the  
video signal of a PAL disc and output it to  
NTSC format.  
{ Multi }  
Select this if the connected TV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
18  
01-45_dvp3120_94_eng1.indd 18  
2007-01-29 4:41:07 PM  
Getting Started (continued)  
Audio, Subtitle and Disc menu  
languages  
Step 5 : Setting the language  
You can choose your preferred language  
or sound track from audio, subtitles and  
disc menu languages. If the selected  
language is not available on the disc, the  
disc’s default language will be used  
instead.  
The language options are different  
depending on your country or region. It  
may not correspond to the illustrations  
shown on the user manual.  
On-screen display (OSD) language  
Select this to change the language of this  
DVD player screen display menu.  
The menu language (on-screen display)  
for the system will remain as you set it.  
- - Preference Page - -  
Audio  
Subtitle  
English  
Chinese  
French  
Spanish  
Portuguese  
Polish  
Disc Menu  
Parental  
PBC  
Mp3 / Jpeg Nav  
Password  
- - General Setup Page - -  
Disc Lock  
Italian  
ENGLISH  
OSD Language  
Sleep  
Set Preference To English  
Volume  
A Press STOP Ç twice to stop playback,  
(if any), then press SETUP.  
Set OSD Language  
B Press X to select { Preference Page }.  
C Press S T to highlight one of the  
A Press SETUP.  
options below, then press X.  
B Press S T to select { OSD Language },  
{ Audio }  
Select this to change disc sound track  
language.  
then press X.  
C Press OK to confirm.  
{ Subtitle }  
Select this to change the subtitle language.  
{ Disc Menu }  
Select this to change the language of the  
disc menu.  
D Use S T to select a language and press  
OK to confirm.  
If the language you want is not in  
the list, then select { Others }, then  
use the numeric keypad (0-9) on the  
remote to enter the 4-digit language code  
‘XXXX’ (see page 5 ‘Language Code’)  
and press OK.  
E Repeat steps C - D for other language  
settings.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
19  
01-45_dvp3120_94_eng1.indd 19  
2007-02-05 1:55:41 PM  
Playback from Disc  
IMPORTANT!  
– If the inhibit icon  
appears on  
Super Video CD  
the TV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
MP3-Disc  
– DVD discs and players are designed  
with regional restrictions. Before  
playing a disc, make sure the disc is  
for the same zone as your player.  
Supported formats  
MP3/WMA tracks  
– The file extensions has to be ‘.mp3’,  
‘.wma’  
– JPEG/ISO format  
Playable discs  
– Maximum 14 characters display.  
– Supported bit-rate;  
32 – 320 kbps (MP3)  
Using this DVD player, you can playback  
on the following discs:  
32 – 192 kbps (WMA)  
DVD Video (Digital Versatile  
Disc)  
JPEG pictures  
– The file extensions has to be ‘.JPG’  
and not ‘.JPEG.’  
– JPEG/ISO format  
– It can only display DCF-standard still  
pictures or JPEG pictures such as  
TIFF.  
DVD RW (DVD Rewritable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
DVD R (DVD Recordable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
CD-R (CD-Recordable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
CD-RW (CD-Rewritable)  
Audio/Video format or  
MP3/WMA/JPEG files.  
Audio CD (Compact Disc  
Digital Audio)  
Video CD  
(Formats 1.0, 1.1, 2.0)  
TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of  
the disc, or due to the condition of recording and authoring software that was used.  
20  
01-45_dvp3120_94_eng1.indd 20  
2007-01-29 4:41:08 PM  
Playback Features  
Starting disc playback  
Basic playback controls  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
A Turn on the TV to the correct program  
number for the DVD player (e.g. ‘EXT’,  
‘0’, ‘AV’).  
B Press STANDBY-ON 2 to turn on  
Pausing playback  
the DVD player.  
A During playback, press PLAY/PAUSE  
u to pause playback and display a still  
picture.  
C Press OPEN/CLOSE ç on the front of  
the DVD player.  
ꢁSound will be muted.  
ꢂYou can also hold down the STOP  
ꢀ
button on the remote control to open  
and close the disc tray.  
B To resume normal playback, press  
PLAY/PAUSE u again.  
D Place a disc into the disc tray with the  
label facing up, then press OPEN/  
CLOSE ç.  
Selecting title/chapter/track  
ꢂDuring playback, press PREV í to go  
to the beginning of the currect chapter/  
track, press PREV í again to go to the  
previous title/chapter/track.  
ꢁFor double-sided discs, load the side  
which you want to play facing up.  
E Playback may start automatically.  
If not, press PLAY/PAUSE u.  
ꢂPress NEXT ë to go to the next  
ꢂIf a disc menu appears on the TV, see  
chapter/track.  
page 22 'Using the Disc Menu'.  
ꢂPress DISPLAY to display the disc  
information text line for title/chapter/  
track (example - 00/08).  
ꢂIf the child lock was activated for the  
inserted disc, you have to enter your six-  
digit password (see page 38).  
ꢂUse alphanumeric keypad (0-9) to  
enter valid title/chapter/track number.  
ꢁThe playback skips to the selected  
title/chapter/track.  
ꢂFor more playback features, see pages  
21~28.  
Tips:  
– Do not overturn the DVD player while disc  
loading, playing or ejecting.  
– Do not close the disc tray manually even if  
the power switched off.  
Stopping playback  
ꢂPress STOP  
.
ꢀ
Tips:  
– Screen saver will start automatically if the  
disc playback is stopped/paused for about 5  
minutes.  
– The player will automatically switch to  
Power Standby mode if you do not press any  
buttons for about 15 minutes after the disc  
has stopped playing.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
21  
01-45_dvp3120_94_eng1.indd 21  
2007-01-29 4:41:08 PM  
Playback Features (continued)  
ꢂDuring the message appears on the TV  
screen, press PREV to start playback  
from the beginning.  
Operations for video  
playback  
ꢁPlayback restarts from the first title  
(DVD) or the beginning of the title/  
track (VCD/CDDA/SVCD).  
Using the Disc Menu  
Depending on the disc, a menu may  
appear on the TV screen once you load  
in the disc.  
To cancel resume mode  
ꢂIn stop mode, press STOP Ç again.  
Tip:  
To select a playback feature or item  
ꢂUse S T W X keys or numeric  
keypad (0-9) on the remote, then press  
OK to start playback.  
– To remove the message from the TV  
screen, press DISPLAY.  
Slow Motion  
To access or remove the menu  
ꢂPress DISC MENU on the remote.  
You can slow forward or slow reverse a  
disc during playback and select a different  
speed.  
Zooming in  
For DVD,VCD,SVCD  
A Press S T during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(forward [DVD,VCD,SVCD] or backward  
[DVD]).  
This function allows you to enlarge the  
picture on the TV screen and to pan  
through the enlarged picture.  
A During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
ꢁSound will be muted.  
B To return to normal speed, press PLAY/  
ꢁUse S T W X keys to pan through  
the enlarged picture.  
PAUSE u.  
ꢁPlayback will continue.  
Forward / Reverse Searching  
B Press ZOOM repeatedly to return to  
You can fast forward or fast reverse a  
disc during playback and select a desired  
search speed.  
the original size.  
Resuming playback from the last  
stopped point  
For DVD,VCD,SVCD,CD,MP3,  
WMA  
A Press W X directly or press í ë for 2  
seconds during playback to select the  
required speed: 2X, 4X, 8X, 16X or 32X  
(backward or forward).  
Resume playback of the last 5 discs is  
possible, even if the disc was ejected  
(open), standby or power off. Auto  
resume is active for DVD,VCD,SVCD,CD  
types of discs.  
ꢁSound will be muted (DVD/VCD/  
SVCD) or intermittent (MP3/WMA/  
CD).  
ꢂLoad one of the last 5 discs.  
ꢁ‘Play from start, press [PREV]’ appears  
during playback for first 10 seconds.  
B To return to normal speed, press PLAY/  
PAUSE u.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
22  
01-45_dvp3120_94_eng1.indd 22  
2007-01-29 4:41:09 PM  
Playback Features (continued)  
For JPEG  
In STOP mode,  
Selecting various repeat  
functions  
– Repeat One (currently playing file)  
– Repeat Folder (current folder)  
– Folder (playing all files in one folder  
once)  
Repeat play mode  
– Single (currently playing file once).  
In PLAY mode,  
The repeat play options vary depending  
on the disc type.  
– Repeat One (currently playing file)  
– Repeat All (all files in the selected  
folder)  
– Repeat Off (playing all files in one  
folder once)  
A While playing a disc, press REPEAT/  
REPEAT A-B once to access repeat  
mode, then press W X to choose  
between repeat options.  
For DVD  
– Single (currently playing file once).  
– Chapter (currently playing chapter)  
– Title (currently playing title)  
– All (entire disc)  
B To cancel repeat playback, press STOP  
Ç.  
– Shuffle (random playback)  
Tip:  
– For VCD, repeat playback is not possible if  
the PBC mode is switched on.  
For Video CD  
– Track (currently playing track)  
– All (entire disc)  
– Shuffle (random playback)  
Repeating a section within a  
chapter/track  
For Audio CD  
– Track (currently playing track)  
– All (entire disc)  
You can repeat the playback of a specific  
segment within a title/chapter track. To  
do this, you must mark the start and end  
of the segment you want.  
For MP3/WMA  
– Repeat One (currently playing file)  
– Repeat Folder (current folder)  
– Folder (playing all files in one folder  
once)  
A While playing a disc, press REPEAT/  
REPEAT A-B twice to access repeat  
a-b mode and choose your starting point.  
B Press REPEAT/REPEAT A-B third  
time at your chosen end point.  
ꢀThe section A and B can be set only  
within the same chapter/track.  
ꢀThe section will now repeat  
continuously.  
– Single (currently playing file once).  
C To exit the sequence, press REPEAT/  
REPEAT A-B fourth time.  
Tip:  
– Pressing REPEAT/REPEAT A-B fourth time  
will exit from all repeat and repeat a-b  
modes.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
23  
01-45_dvp3120_94_eng1.indd 23  
2007-02-05 1:55:44 PM  
Playback Features (continued)  
Time Search  
Viewing the disc playback  
information  
A Press S T to select {TT Time} / {CH  
Time} / {Disc Time} or {Track Time},  
then press X to access.  
B Use the alphanumeric keypad 0-9 to  
input the valid time (such as 0:34:27).  
ꢁThe playback skips to the chosen  
time.  
Using the OSD menu  
OSD menu shows the disc playback  
information (for example, title or chapter  
number, elapsed playing time, audio/  
subtitle language), a number of operations  
can be done without interrupting disc  
playback.  
Audio / Subtitle  
A Press S T to select {Audio} or  
ꢂDuring playback, press DISPLAY on the  
remote control.  
{Subtitle}, then press X to access.  
B Press S T to select one language.  
ꢁThe available disc information appears  
on the TV screen with the following  
sequence.  
C Press OK to confirm.  
ꢁThe current audio or subtitle language  
will be changed to the selected  
language.  
Menu  
Title  
01/01  
09/12  
2CH  
Off  
Chapter  
Audio  
Subtitle  
Chinese  
Angle  
Bitrate 61  
Title Remain 0:48:59  
(DVD)  
(VCD)  
A Press S T to select {Angle}, then press  
X to access.  
Menu  
Track  
Disc Time 0:48:53  
Track Time 0:48:53  
Repeat AB Off  
01/01  
B Use the alphanumeric keypad 0-9 to  
input a valid number.  
ꢁPlayback will go to the selected angle.  
Bitrate 71  
Total Elapsed 0:01:32  
Time Display  
Title/Chapter/Track selection  
ꢂPress S T to select {Time Disp.} (Time  
Display), then press X to access.  
ꢁDepending on the disc in the DVD  
player, the following display types  
appear on the TV screen.  
A Press S T to select {Title} / {Chapter}  
or {Track}, then press X to access.  
B Use the alphanumeric keypad 0-9 to  
input a valid number (e.g. 04/05).  
ꢁThe playback skips to the chosen title/  
chapter/track.  
For DVD  
– TT Elapsed (elapsed playing time of  
current Title)  
– TT Remain (remaining playing time of  
current Title)  
– CH Elapsed (elapsed playing time of  
current Chapter)  
– CH Remain (remaining playing time of  
current Chapter)  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
24  
01-45_dvp3120_94_eng1.indd 24  
2007-01-29 4:41:09 PM  
Playback Features (continued)  
For VCD/SVCD  
– Total Elapsed (elapsed playing time of  
current Disc)  
– Total Remain (remaining playing time  
of current Disc)  
– Single Elapsed (elapsed playing time of  
current Track)  
– Single Remain (remaining playing time  
of current Track)  
Viewing Audio CD playback  
information  
This function displays audio disc  
information on the TV screen during  
playback.  
ꢂDuring playback, press DISPLAY.  
ꢁA list of available disc information  
appears on the TV screen.  
Preview  
The preview function allows you to  
reduce the picture of 6 tracks enough to  
display in a full screen.  
Disc GoTo /Track GoTo /Track  
Selection  
A Press S T to select {Preview}, then  
press X to access.  
A Press DISPLAY repeatedly to select an  
option.  
ꢁThe preview menu appears on the TV  
screen.  
B Enter minutes and seconds from left to  
right in the time edit box using  
alphanumeric keypad 0-9.  
Select Digest Type:  
Title Digest  
Select Digest Type:  
Track Digest  
Chapter Digest  
Title Interval  
Disc Interval  
Track Interval  
ꢁPlayback will change to the chosen  
time or to the selected track.  
Chapter Interval  
For Audio CD  
– Disc Go To: XX/XX (enable to select  
any part within the disc)  
– Track Go To: XX/XX (enable to  
select any part within the current  
track)  
– Select Track: XX/TT (enable to select  
any track within the disc)  
(DVD example)  
(Video CD example)  
B Press S T to select the preview type,  
then press OK.  
ꢁThe picture of each segment will  
appears on the TV screen.  
01  
02  
03  
A
D
B
E
C
F
05  
06  
04  
(example of 6 thumbnail pictures display for  
DVD chapter digest preview type)  
C Press S T W X to select a track of  
input your selected track number using  
the alphanumeric keypad (0-9), then  
press OK.  
ꢁPlayback will start automatically on  
the selected track.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
25  
01-45_dvp3120_94_eng1.indd 25  
2007-01-29 4:41:09 PM  
Playback Features (continued)  
Special DVD Features  
Playing aTitle  
SpecialVCD and SVCD  
Feature  
Playback Control (PBC)  
A Press DISC MENU.  
ꢁThe disc title menu appears on the TV  
screen.  
For VCD with Playback Control  
(PBC) feature (version 2.0 only)  
B Use S T W X keys or alphanumeric  
ꢂPress DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
keypad 0-9 to select a play option.  
ꢁIf you select ‘PBC ON’, the disc menu  
(if available) will appear on the TV.  
ꢁUse the PREV í / NEXT ë to go  
to previous/next page or use the  
alphanumeric keypad 0-9 to select a  
play option.  
C Press OK key to confirm.  
Changing the Audio Language  
For DVD  
ꢂPress AUDIO repeatedly to select  
different audio languages.  
ꢂDuring playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
Changing the Audio Channel  
For VCD  
If you want to skip the index menu  
and playback directly from the  
beginning,  
ꢂPress AUDIO to select the available  
audio channels provided by the disc  
(MONO LEFT, MONO RIGHT, MIX-  
MONO, STEREO).  
ꢂPress DISC MENU key on the remote  
control to turn to PBC off.  
Subtitles  
ꢂPress SUBTITLE repeatedly to select  
different subtitle languages.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
26  
01-45_dvp3120_94_eng1.indd 26  
2007-01-29 4:41:09 PM  
Playback Features (continued)  
Playback selection  
Playing MP3/WMA/JPEG  
Picture CD  
During playback, you can;  
ꢂPress PREV í / NEXT ë to select  
the previous/next track/file in the current  
folder.  
This DVD player can playback MP3,  
WMA, JPEG and picture CD files on a  
personally recorded CD-R/RW disc or ꢂPress PLAY/PAUSE u repeatedly to  
commercial CD.  
pause/resume playback.  
IMPORTANT!  
You have to turn on your TV and set to  
the correct Video In channel. (See page  
16 ‘Finding your viewing channel’).  
General Operation  
A Load a disc.  
ꢁThe disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
ꢁThe data disc menu appears on the  
TV screen.  
01:42 04:40 128kbps  
001/020  
Coco Lee  
--  
Before  
MP3  
Coco  
Coco  
-
-
Before  
I love  
- - - - - -  
MP3  
ALBUM - - - - - -  
2002  
MP3 Coco  
-
Jazz  
B Press PREV í / NEXT ë to go to  
previous / next page of the menu.  
C Press S T to select the folder and press  
OK to open the folder.  
D Press S T to select a track/file.  
E Press OK to confirm.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
27  
01-45_dvp3120_94_eng1.indd 27  
2007-01-29 4:41:09 PM  
Playback Features (continued)  
Playback with multi-angles (JPEG)  
Zoom picture (JPEG)  
ꢂDuring playback, press S T W X to ꢂDuring playback, press ZOOM  
rotate the picture on the TV screen.  
S: flip the picture vertically by 180º  
T: flip the picture horizontally by 180º  
W: rotate the picture anti-clockwise by  
90º  
repeatedly to display the picture with  
different scales.  
ꢂUse S T W X to view the zoomed  
picture.  
X: rotate the picture clockwise by 90º  
Playing MP3/WMA music and JPEG  
picture simultaneously  
Tips:  
– It may not be possible to play certain  
MP3/JPEG disc due to the configuration and  
characteristics of the disc or condition of the  
recording.  
A Load a disc that contains MP3/WMA  
music and JPEG picture files.  
ꢁThe disc menu appears on the TV  
screen.  
– It is normal to experience an occasional  
‘skip’ while listening to your MP3 disc.  
– For multi-session discs with different  
formats, only the first session will be  
available.  
B Select an MP3/WMA track.  
C During MP3/WMA music playback, select  
a picture file on the TV screen and press  
OK.  
ꢁA slide show will start at the same  
time as the MP3/WMA audio file is  
playing.  
Preview Function (JPEG)  
This function shows the content of the  
current folder or the whole disc.  
A Press DISPLAY during playback.  
ꢁ12 thumbnail pictures will appear on  
the TV screen.  
D To quit simultaneous playback, press  
STOP Ç to stop the slide show.  
E Press STOP Ç again to stop the audio.  
Tips:  
– Some files on Kodak or JPEG disc may be  
distorted during playback due to the  
configuration and characteristics of the disc.  
– During simultaneous playback, fast  
forward / reverse or slow forward is not  
available.  
B Press PREV í / NEXT ë to display  
the other pictures on the previous / next  
page.  
C Press S T W X to select one of the  
picture and press OK to start playback.  
D Press DISC MENU to return to Picture  
CD menu.  
TIPS: The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
28  
01-45_dvp3120_94_eng1.indd 28  
2007-01-29 4:41:10 PM  
DVD Menu Options  
Locking/Unlocking the disc for  
viewing  
This DVD Player setup is carried out via  
the TV, enabling you to customize the  
DVD player to suit your particular  
requirement.  
Not all discs are rated or coded by the  
disc maker. You can prevent a specific  
disc from playing by locking the disc. Up  
to 20 discs can be locked.  
Using the General setup  
menu  
A In ‘General Setup Page’, press S T to  
select { Disc Lock }, then press X.  
{ Lock }  
A Press SETUP on the remote control.  
Select this to block the playback of the  
current disc. Subsequent access to a  
locked disc requires six-digit password.  
The default password is '136900' (see  
page 38 'Changing the password').  
ꢁThe system setup menu appears.  
- - General Setup Page - -  
Disc Lock  
OSD Language  
Sleep  
{ Unlock }  
Select this to unlock the disc and allow  
future playback.  
Volume  
B Use S T to select a setting and press  
OK to confirm.  
Go to General Setup Page  
B Press W X to select { General Setup  
OSD Language  
Page }.  
This menu contains various language  
options for the language displayed on the  
screen. For details, see page 19.  
C Press S T to select an item, then press  
X to access.  
Example: { OSD Language }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
D Use S T to select a setting and press  
OK to confirm.  
Example: { English }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
29  
01-45_dvp3120_94_eng1.indd 29  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
Sleep  
Volume  
Sleep function allows you to turn off the  
DVD player automatically after a preset  
time.  
This function allows you to adjust the  
volume level between 0 to 20.  
ꢂYou can also press VOLUME on the  
remote control to display the current  
value on the TV screen.  
A In ‘General Setup Page’, press S T to  
select { Sleep }, then press X.  
Press W X to adjust the volume level.  
{ 15 Mins }  
Turn off the DVD player after 15  
minutes.  
A In ‘General Setup Page’, press S T to  
select { Volume }, then press X.  
ꢁ'Volume Control Page' appears on the  
TV screen.  
{ 30 Mins }  
Turn off the DVD player after 30  
minutes.  
B Press W X to adjust the volume level  
between 0 to 20, the default setting is 20.  
{ 45 Mins }  
Turn off the DVD player after 45  
minutes.  
{ 60 Mins }  
Turn off the DVD player after 60  
minutes.  
{ Off }  
Turn off the sleep function.  
B Use S T to select a setting and press  
OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
30  
01-45_dvp3120_94_eng1.indd 30  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
Analog Output  
Using the Audio setup menu  
This option allows you to set the stereo  
analog output of your DVD player.  
A Press SETUP on the remote control.  
A In ‘Audio Setup Page’, press S T to  
ꢁThe system setup menu appears.  
select { Analog Output }, then press X.  
- - Audio Setup Page - -  
{ Stereo }  
Select this option when output delivers  
sound from only the two front speakers.  
Analog Output  
Digital Audio Setup  
Sound Mode  
Night Mode  
{ LT/RT }  
Select this option if your DVD player is  
connected to a Dolby Pro Logic decoder.  
{ V SURR }  
Go to Audio Setup Page  
Allows the DVD player to use virtual  
surround sound effects.  
B Press W X to select { Audio Setup  
Page }.  
B Use S T to select a setting and press  
OK to confirm.  
C Press S T to select an item, then press  
X to access.  
Digital Audio Setup  
Example: { Night Mode }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
The options included in Digital Audio  
Setup are: {Digital Output} and {LPCM  
Output}.  
A In ‘Audio Setup Page’, press S T to  
select { Digital Audio Setup }, then  
press X.  
D Use S T to select a setting and press  
OK to confirm.  
B Press S T to select an item, then press  
X to access.  
Example: { On }  
ꢁThe setting is selected and setup is  
complete.  
C Use S T to select a setting and press  
OK to confirm.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
31  
01-45_dvp3120_94_eng1.indd 31  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
Digital Output  
Set the Digital Output according to your  
optional audio equipment connection.  
Sound Mode  
The options included in Sound Mode  
Setup are {3D}, {Movie Mode}, {Music  
Mode}.  
{ All }  
Select this if the connected device has a  
built-in multichannel decoder that  
supports one of the multichannel audio  
format (Dolby Digital, MPEG-2).  
A In ‘Audio Setup Page’, press S T to  
select { Sound Mode }, then press X.  
B Press S T to select an item, then press  
X to access.  
{ PCM Only }  
C Use S T to select a setting and press  
Select this if the connected device is not  
capable of decoding multichannel audio.  
The DVD player will convert the Dolby  
Digital and MPEG-2 multichannel signals  
to PCM (Pulse Code Modulation).  
OK to confirm.  
3D  
This function provides a virtual surround  
sound experience using just two  
speakers.  
{ Off }  
ꢁ{ Off } – { Living Room } – { Hall }  
– { Arena } – { Church }  
To deactivate the digital audio output.  
For example, if you use the AUDIO OUT  
sockets to connect to a TV or stereo  
system.  
Movie Mode  
Provides various Movie sound effects.  
ꢁ{ Off } – { Sci-Fic } – { Action } –  
{ Drama } – { Concert }  
LPCM Output  
If you connect the DVD player to a PCM  
compatible receiver via the digital  
terminals, such as coaxial or optical etc,  
you may need to adjust ‘LPCM Output’.  
Music Mode  
Select a Sound Mode that matches the  
type of music you are playing. These  
preset Sound Modes adjust the frequency  
bands of the audio to enhance your  
favorite music.  
Provides various Music sound effects.  
ꢁ{ Off } – { Digital } – { Rock } –  
{ Classic } – { Jazz }  
{ 48K }  
Playback a disc recorded at the sampling  
rate of 48kHz.  
{ 96K }  
Playback a disc recorded at the sampling  
rate of 96kHz. This rate can only be  
achieved in Stereo-Classic (Flat) mode.  
Tip:  
– Discs are recorded at a certain sampling  
rate. The higher the sampling rate, the better  
sound quality. LPCM Output can be selected  
only when PCM Only is activated.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
32  
01-45_dvp3120_94_eng1.indd 32  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
Night Mode - turning on/off  
Using theVideo setup menu  
This mode optimizes playback of sound at  
low volume. High volume outputs will be  
softened and low volume outputs are  
brought upward to an audible level.  
A Press SETUP on the remote control.  
ꢁThe system setup menu appears.  
A In ‘Audio Setup Page’, press S T to  
- - Video Setup Page - -  
select { Night Mode }, then press X.  
TV Type  
TV Display  
Progressive  
Picture Setting  
{ On }  
Select this to set low volume output. This  
feature is only available for movie discs  
with Dolby Digital mode.  
{ Off }  
Go to Video Setup Page  
Turns off night mode feature. Select this  
to enjoy the surround sound with its full  
dynamic range.  
B Press W X to select { Video Setup  
Page }.  
B Use S T to select a setting and press  
C Press S T to select an item, then press  
X to access.  
OK to confirm.  
Example: { TV Type }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
D Use S T to select a setting and press  
OK to confirm.  
Example: { PAL }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
33  
01-45_dvp3120_94_eng1.indd 33  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
TVType  
Progressive  
This menu contains the options for  
selecting the color system that matches  
the connected TV. For details, see page  
18.  
In the progressive scan mode, you can  
enjoy the high quality picture with less  
flickers. It only works when you have  
connected the DVD player’s YPbPr jacks  
to your TV that supports the progressive  
video input. Otherwise, a distorted  
Setting theTV Display  
picture will appear on the TV. For proper  
progressive scan set up, see page 17.  
The picture shape can be adjusted to fit  
your TV and the format must be available  
on the playback disc. Otherwise, the TV  
display will not affect the picture during  
playback.  
A In ‘Video Setup Page’, press S T to  
select { Progressive }, then press X.  
{ Off }  
A In ‘Video Setup Page’, press S T to  
To disable Progressive Scan function.  
select { TV Display }, then press X.  
{ On }  
{ 4:3 Pan Scan }  
Select this if you  
have a normal  
TV and want  
both sides of the  
To enable Progressive Scan function.  
B Use S T to select a setting and press  
OK to confirm.  
ꢁFollow the instructions shown on the  
TV screen to confirm the selection (if  
any).  
ꢁIf a distorted picture appears on the  
TV screen, wait for 15 seconds for  
auto recovery.  
picture to be  
trimmed or formatted on the TV screen.  
{ 4:3 Letter Box }  
Select this if you have a  
normal TV. A ‘wide-  
screen’ display with  
black bars on the top  
and bottom will be displayed on the TV  
screen.  
{ 16:9 }  
Select this for  
wide-screen TV  
(frame ratio  
16:9).  
B Use S T to select a setting and press  
OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
34  
01-45_dvp3120_94_eng1.indd 34  
2007-01-29 4:41:10 PM  
DVD Menu Options (continued)  
D Press S T to highlight one of the  
Picture Setting  
following options.  
This DVD player provides four  
predefined sets of picture color settings.  
BRIGHTNESS  
Increase the value to brighten the picture  
or vice versa. Choose zero (0) for  
average setting.  
A In ‘Video Setup Page’, press S T to  
select { Picture Setting }, then press X.  
{ Standard }  
Select this for a preset standard picture  
setting.  
CONTRAST  
Increase the value to sharpen the picture  
or vice versa. Choose zero (0) to  
balance the contrast.  
{ Vivid }  
Select this to make the picture brighter.  
{ Cool }  
TINT  
Select this to make the picture softer.  
Increase the value to darken the picture  
or vice versa. Choose zero (0) for  
average setting.  
{ Personal }  
Select this to personalize your picture  
color by adjusting the brightness,  
contrast, tint and color (saturation).  
COLOR  
Increase the value to enhance the color  
in your picture or vice versa. Choose  
zero (0) to balance the color.  
B Use S T to select a setting and press  
OK to confirm.  
C If you select {PERSONAL}, then proceed  
to steps D~G.  
E Press W X to adjust the setting that best  
suits your personal preference.  
ꢁThe ‘personal picture setup’ menu  
appears.  
F Repeat steps D~E for adjusting other  
color features.  
Personal Picture Setup  
G Press OK to confirm.  
0
0
0
0
Brightness  
Contrast  
Tint  
Color  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
35  
01-45_dvp3120_94_eng1.indd 35  
2007-01-29 4:41:12 PM  
DVD Menu Options (continued)  
Subtitle/Audio/Disc Menu  
Using the Preference setup  
menu  
These menus contains various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 19.  
A Press STOP Ç twice to stop playback,  
(if any), then press SETUP on the  
remote control.  
Parental  
Depending on the DVD, you may be  
asked to change the parental level while  
playing the disc. The rating levels are  
from 1 to 8 and are country dependent.  
You can prohibit the playing of certain  
discs that are not suitable for your  
children, or have certain discs played with  
alternative scenes.  
ꢁThe system setup menu appears.  
- - Preference Page - -  
Audio  
Subtitle  
Disc Menu  
Parental  
PBC  
Mp3/Jpeg Nav  
Password  
A In ‘Preference Page’, press S T to select  
Go To Preference Page  
{ Parental }, then press X.  
- - Preference Page - -  
B Press W X to select { Preference  
Audio  
2 G  
Page }.  
Subtitle  
3 PG  
C Press S T to select an item, then press  
X to access.  
Disc Menu  
Parental  
PBC  
4 PG13  
5 PGR  
6 R  
Example: { Parental }  
ꢁThe options for the selected item  
appears.  
ꢁIf the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at  
the current state.  
Mp3/Jpeg Nav  
Password  
7 NC17  
8 ADULT  
Set Parental Control  
B Use S T to select a rating level and  
press OK to confirm.  
ꢁSelect { 8 Adult } to disable parental  
level and allow all discs to play.  
D Use S T to select a setting and press  
OK to confirm.  
C Use the alphanumeric keypad 0-9 to  
enter the six-digit password (see page 38  
‘Changing the Password’), then press OK  
to confirm.  
Example: { 8 Adult }  
ꢁThe setting is selected and setup is  
complete.  
E To exit, press SETUP.  
ꢂDVDs that are rated higher than the level  
you selected will not play unless you  
enter your six-digit password.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
36  
01-45_dvp3120_94_eng1.indd 36  
2007-01-29 4:41:12 PM  
DVD Menu Options (continued)  
Rating Explanations  
PBC  
{ 1.Kid Safe }  
Childsafe; acceptable for viewers of all  
ages.  
You can set the PBC to {On} or {Off}.  
This feature is available only on SVCD or  
Video CD 2.0 with playback control  
(PBC) feature. For details, see page 26.  
{ 2. G }  
General Audience; recommended as  
acceptable for viewers of all ages.  
MP3/JPEG Menu  
MP3/JPEG Navigator can be set only if  
the disc is recorded with menu. It allows  
you to select different display menu for  
easy navigation.  
{ 3. PG }  
Parental Guidance suggested.  
{ 4. PG – 13 }  
Unsuitable for children under age 13.  
A In ‘Preference Page’, press S T to select  
{ 5. PG – R }  
Parental Guidance; recommended that  
parents restrict children under 17 from  
viewing.  
{ MP3/JPEG Nav }, then press X.  
{ Without Menu }  
Select this to display all the files  
contained in the MP3/Picture CD.  
{ 6. R }  
{ With Menu }  
Select this to display only the folder  
menu of the MP3/Picture CD.  
Restricted; recommended only when  
supervised by a parent or adult guardian.  
{ 7. NC – 17 }  
B Use S T to select a setting and press  
No Children under age 17; not  
recommended viewing for children under  
age 17.  
OK to confirm.  
{ 8. Adult }  
Mature Material; should be viewed only  
by adults due to graphic sexual material,  
violence or language.  
Tips:  
– This feature will not limit viewing if the  
disc manufacturer did not code the disc.  
– VCD, SVCD, CD have no level indication,  
so parental control has no effect on these  
type of discs. This also applies to most illegal  
DVDs.  
– Some DVDs are not coded with a rating  
though the movie rating may be printed on  
the disc cover. The rating level feature does  
not prohibit play of such discs.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
37  
01-45_dvp3120_94_eng1.indd 37  
2007-01-29 4:41:12 PM  
DVD Menu Options (continued)  
Changing the Password  
Restoring to original settings  
You need to enter your six-digit  
password to play a prohibited disc or if  
prompted for a password. The same  
default password is used for both  
Parental and Disc Lock.  
Setting the { Default } function will reset  
all options and your personal settings to  
the factory defaults, except for Parental  
and Disc Lock.  
A In ‘Preference Page’, press S T to select  
{ Default }, then press X to select  
{ Reset }.  
A In ‘Preference Page’, press S T to select  
{ Password }, then press X to select  
{ Change }.  
B Press OK to confirm.  
ꢁAll settings will now reset to factory  
defaults.  
B Press OK and the menu appears on the  
TV screen.  
Old Password  
New Password  
Confirm PWD  
OK  
C Use the alphanumeric keypad 0-9 to  
enter the six-digit password.  
ꢁWhen doing this for the first time,  
enter the default password ‘136900’.  
ꢂIf you forget your old six-digit password,  
enter the default password ‘136900’.  
D Enter the new six-digit password.  
E Enter the new six-digit password a  
second time to confirm.  
ꢁThe new six-digit password will now  
take effect.  
F Press OK to confirm.  
TIPS:  
The underlined option is the factory default setting.  
Press W to go back to previous menu item. Press SETUP to exit the menu item.  
38  
01-45_dvp3120_94_eng1.indd 38  
2007-01-29 4:41:12 PM  
Others  
Software upgrade  
Periodically Philips will issue software  
upgrade to enhance your user  
experience.  
IMPORTANT!  
– Power supply must not be  
interrupted during upgrade!  
To check the current software version of  
this DVD player;  
A Press OPEN/CLOSE ç on the DVD  
player to open the disc tray.  
ꢁThe disc tray will open.  
B Press numeric keypad ‘55’ on the  
remote control.  
ꢁThe file name of the software installed  
in the DVD player appears on the TV  
screen.  
To download and install the latest  
software to the DVD player;  
A Visit the Philips website ‘www.philips.  
com/support’ to check the availability of  
the latest software upgrade.  
B Download the software to a CD-R.  
C Insert the CD-R to the disc slot.  
ꢁThe menu appears on the TV screen.  
Upgrade  
File Detected  
Upgrade?  
Press Play to start  
D Press PLAY/PAUSE u to download  
the latest software in the DVD player.  
ꢁThe DVD player will re-start  
automatically once the download  
complete.  
39  
01-45_dvp3120_94_eng1.indd 39  
2007-01-29 4:41:12 PM  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
Philips for help.  
Problem  
Solution  
No power.  
–
Press STANDBY-ON button on the front of the DVD  
player to turn on the system.  
–
–
Make sure the AC outlet has power.  
Remote control does not work.  
Aim the remote control directly at the sensor on the front  
of the DVD player (not towards TV).  
–
Remove any obstacles between DVD player and the remote  
control.  
–
–
Batteries are weak, replace the batteries.  
Check the polarities of the batteries are as indicated on the  
remote control ( signs).  
No picture.  
–
Turn on your TV and set to the correct Video In channel  
for the DVD player. You may go to Channel 1 on your TV,  
then press the channel down button on your TV’s remote  
control until you see the TV program.  
–
–
Check the video connection between the DVD player and  
the TV.  
The disc does not match with the TV color system standard  
(PAL/NTSC).  
The disc is dirty, clean the disc.  
Sometimes a small amount of picture distortion may  
appear. This is not a malfunction.  
The picture is distorted or black &  
white during playback.  
–
–
–
To deactivate progressive scan function manually;  
1) Turn off your TV progressive scan mode (or set to  
interlaced mode)  
2) Press OPEN/CLOSE to open the DVD player disc tray.  
3) Press the alphanumeric keypad ‘1’ for few seconds.  
–
–
Check the audio connections, the red and white jacks are  
connected correctly.  
Set the Digital output correctly, based on the equipment you  
connected to the DVD player.  
No sound.  
–
–
–
Insert the disc with the label facing up.  
Wrong region code.  
Wrong disc type. Read chapter “Playback from Disc -  
Playable discs” for details.  
Disc does not play.  
–
–
Make sure the disc is not scratched or warped. Clean the  
disc or replace a new one.  
Check if the disc is defective by trying another disc.  
–
–
The aspect ratio is fixed on the DVD disc.  
Depending on the TV, it may not be possible to change the  
aspect ratio.  
The aspect ratio of the screen cannot  
be changed.  
Need Help? Visit us at www.philips.com/support  
40  
01-45_dvp3120_94_eng1.indd 40  
2007-01-29 4:41:12 PM  
Troubleshooting (continued)  
Problem  
Solution  
–
–
Press STOP button twice before selecting the setup/system  
menu.  
Depending on the disc availability, some menu items cannot  
be selected.  
Not able to select some items in the  
setup/system menu.  
–
–
Insert a readable disc with the playback side facing down.  
Check the disc type, colour system (PAL/NTSC) and region  
code.  
The DVD player does not start  
playback.  
–
–
–
Check for any scratches or smudges on the disc.  
Press SETUP to turn off the setup menu screen.  
You may need to enter the password in order to change the  
parental rating level or to unlock the disc for playback.  
Moisture may have condensed inside the system. Remove the  
disc and leave the system turned on for about an hour.  
Disconnect the power cord from the power outlet for a few  
minutes. Reconnect the power cord and try to operate again  
as usual.  
–
–
–
–
Check the disc for fingerprint/scratches and clean with a soft  
cloth wiping from center to edge.  
Picture freezes momentarily during  
playback.  
Check that the output of the video signal is turn to  
{ YPbPr }.  
Unable to select Progressive Scan on/  
off.  
Need Help? Visit us at www.philips.com/support  
41  
01-45_dvp3120_94_eng1.indd 41  
2007-01-29 4:41:12 PM  
Specifications  
TV STANDARD(PAL/50Hz)(NTSC/60Hz)  
AUDIO PERFORMANCE  
Number of lines 625  
Playback Multistandard(PAL/NTSC)  
525  
DA Converter  
DVD  
24 bit, 192 kHz  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
VIDEO PERFORMANCE  
SVCD  
Video DAC  
YPbPr  
Video Output  
12 bit, 108 MHz  
0.7 Vpp ~ 75 ohm  
1Vpp ~ 75 ohm  
fs 44.1kHz 4Hz- 20kHz  
fs 44.1kHz 4Hz- 20kHz  
> 90 dB  
CD/VCD  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
Distortion/noise (1kHz)  
MPEG MP3  
> 80 dB  
> 70 dB  
> 65 dB  
MPEG Audio L3  
VIDEO FORMAT  
Digital  
MPEG 2 for DVD,SVCD  
MPEG 1 for VCD  
Compression  
DVD  
50Hz  
60Hz  
720 pixels  
480 lines  
CONNECTIONS  
YPbPr Output  
Video Output  
Horiz. resolution 720 pixels  
Vertical resolution 576 lines  
Cinch 3x  
Cinch (yellow)  
Cinch (white/red)  
1 coaxial  
Audio Output(L+R)  
Digital Output  
VCD  
50Hz  
60Hz  
Horiz. resolution 352 pixels  
Vertical resolution 288 lines  
352 pixels  
240 lines  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
AUDIO FORMAT  
Digital  
MPEG/ AC-3/  
PCM  
compressed  
Digital  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
CABINET  
Dimensions (w x h x d)  
Weight  
360 x 37 x 235 mm  
Approximately 2 kg  
MP3(ISO 9660) 96, 112, 128,  
256, 320kbps &  
POWER CONSUMPTION  
variable bit rate  
fs, 32, 44.1, 48 kHz  
Power Supply Rating  
110V – 240V;  
50/60Hz  
< 10 W  
Analog Sound Stereo  
Power consumption  
Power consumption in  
Standby mode  
Dolby Surround compatible downmix from Dolby  
Digital multi-channel sound  
< 1 W  
42  
01-45_dvp3120_94_eng1.indd 42  
2007-01-29 4:41:12 PM  
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound  
has specific numerical values. These jacks send  
audio through two channels, the left and right.  
MP3: A file format with a sound data  
compression system. ‘MP3’ is the abbreviation of  
Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3. By using MP3 format, one CD-R or  
CD-RW can contain about 10 times as much data  
volume as a regular CD can.  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image. The  
horizontal vs. vertical ratio of conventional TVs. is  
4:3, and that of wide-screens is 16:9.  
Multichannel: DVD is specified to have each  
sound track constitute one sound field.  
Multichannel refers to a structure of sound tracks  
having three or more channels.  
AUDIO OUT Jacks: Jacks on the back of the  
DVD System that send audio to another system  
(TV, Stereo, etc.).  
Parental Control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
Bit Rate: The amount of data used to hold a  
given length of music; measured in kilobits per  
seconds, or kbps. Or, the speed at which you  
record. Generally, the higher the bit rate, or the  
higher the recording speed, the better the sound  
quality. However, higher bit rates use more space  
on a Disc.  
software’s level is higher than the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
Chapter: Sections of a picture or a music piece  
on a DVD that are smaller than titles. A title is  
composed of several chapters. Each chapter is  
assigned a chapter number enabling you to locate  
the chapter you want.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on  
a Video CD or SVCD that supports PBC, you can  
enjoy interactive-type software as well as software  
having a search function.  
Component Video Out Jacks: Jacks on the  
back of the DVD System that send high-quality  
video to a TV that has Component Video In jacks  
(R/G/B, Y/Pb/Pr, etc.).  
Progressive Scan: It displays all the horizontal  
lines of a picture at one time, as a signal frame.  
This system can convert the interlaced video from  
DVD into progressive format for connection to a  
progressive display. It dramatically increases the  
vertical resolution.  
Disc menu: A screen display prepared for  
allowing selection of images, sounds, subtitles,  
multi-angles, etc recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks. These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
DivX® 3.11/4.x/5.x/6.0: The DivX® codec is a  
patent-pending, MPEG-4 based video compression  
technology, developed by DivX® Networks, Inc.,  
that can shrink digital video to sizes small enough  
to be transported over the internet, while  
maintaining high visual quality.  
Region code: A system for allowing discs to be  
played back only in the region designated  
beforehand. This unit will only play discs that have  
compatible region codes. You can find the region  
code of your unit by looking on the product label.  
Some discs are compatible with more than one  
region (or ALL regions).  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or  
the entire album in audio software. Each title is  
assigned a title number enabling you to locate the  
title you want.  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing up to  
six channels of digital audio (front left and right,  
surround left and right, center and subwoofer).  
TV OUT jack: Jack on the back of the DVD  
System that sends video to a TV.  
WMA: Windows Media Audio. Refers to an  
audio compression technology developed by  
Microsoft Corporation. WMA data can be  
encoded by using Windows Media Player version 9  
or Windows Media Player for Windows XP. Files  
are recognized by their file extension “WMA.”  
DTS: Digital Theatre Systems. This is a surround  
sound system, but it is different from Dolby  
Digital. The formats were developed by different  
companies.  
JPEG: A very common digital still picture format.  
A still-picture data compression system proposed  
by the Joint Photographic Expert Group, which  
features small decrease in image quality in spite of  
its high compression ratio.  
43  
01-45_dvp3120_94_eng1.indd 43  
2007-01-29 4:41:13 PM  
  
  
  
Meet Philips at the Internet  
http://www.philips.com/support  
DVP3120/DVP3721  
CLASS 1  
LASER PRODUCT  
SgpSL-0705/94-2  
01-45_dvp3120_94_eng1.indd 45  
2007-01-29 4:41:14 PM  

Indesit Cooktop IS60D1 S User Manual
Indesit FE10KC User Manual
Intel D815EPEA2 User Manual
JVC AV 20020 User Manual
KitchenAid KECC507RSS05 User Manual
Maytag Cooktop ALY1680BD User Manual
Mellerware Convection Oven 24850 User Manual
Motorola MD7080 User Manual
Philips 21AA3557 User Manual
Philips 25PT5536 User Manual