Oricom P80 Series
1.8GHz DECT Cordless phone
Keep this user guide
for future reference.
WARNING
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT,
AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-
MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS USER
GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES
Deregister............................................................................................................. 17
PIN code............................................................................................................... 18
Reset .................................................................................................................... 18
OTHER FEATURES .................................................................................................18
Key lock..................................................................................................................... 18
Shortcut to turn handset ringer on/off........................................................................ 19
Message waiting indication........................................................................................ 19
Paging the handsets.................................................................................................. 19
Out of range warning................................................................................................. 19
BENEFITS OF MULTI-HANDSETS....................................................................19
Answering an internal call.......................................................................................... 19
Making an internal call............................................................................................... 20
During an external call............................................................................................... 20
Inquiry call ............................................................................................................ 20
Call transfer .......................................................................................................... 20
Conference call..................................................................................................... 20
TROUBLESHOOTING..............................................................................................21
NOTES FOR OPERATION IN NEW ZEALAND .......................................................21
WARRANTY INFORMATION ...................................................................................22
3
Environment and safety
•
•
•
Avoid exposure of this telephone to moisture or liquid.
To prevent electric shock, do not open the handset or base cabinet.
Avoid metallic contact (e.g. metal clips, keys) between the battery
contacts and charging conductors.
•
There is a slight chance that the telephone could be damaged by an
electrical storm. It is recommended that users unplug the phone from the
mains supply and telephone socket during a storm.
•
•
Do not use the handset in an explosive hazard area such as where there
is gas leaking.
There is a chance that the telephone could be damaged by an electrical
storm. It is recommended that users unplug the phone from the mains
supply and telephone socket during a storm.
•
Follow the local regulations regarding the disposal of your packing
materials, exhausted batteries and used phone. Wherever possible,
recycle those materials.
•
•
•
We advise that this phone should not be used near intensive care
medical equipment or by persons with pacemakers.
Clean with a dry, soft, lint-free cloth. Never use cleaning agents,
particularly aggressive solvents.
Because the phone works by sending radio signals between base
station and handset, wearers of hearing aids may experience
interference in the form of a humming noise.
•
Your phone can interfere with electrical equipment such as answering
machines, TV and radio sets, clock radios and computers if placed too
close. It is recommended that you position the base unit at least one
metre from such appliances.
•
•
•
This telephone complies with applicable safety requirements for
exposure to radio waves (EMR). The mean power of this telephone does
not exceed 20mW limit at which point testing is required.
The earpiece of the handset may attract small metal objects such as
staples and pins. Care should be taken when placing the handset near
these items.
CAUTION
This telephone is not designed for making emergency telephone calls
when the mains power fails. Always have a corded phone available to
be able to make and receive calls to emergency services if the mains
power fails.
4
Do not use your telephone during an electrical storm thunderstorm as
it is possible to get an electric shock. Refer to information contained
in the White pages directory.
Use only the mains adapter supplied with this product. Incorrect adapter
polarity or voltage can seriously damage the unit.
Adaptor for base:-
Input: 230 VAC 50 Hz
Output: 6VDC 400 mA
Adaptor for Charger
Input: 230 VAC 50 Hz
Output: 9 VDC 150 mA
Pack Contents
Depending on the model you have purchased the pack should contain the
following items:-
P80
1
1
P80+1
P80+2
P80+3
Number of Base units
Number of Handsets
1
2
1
1
1
2
4
1
3
2
1
1
3
6
1
4
3
1
1
3
8
Number of charger adaptors NIL
Number of Power adaptors
Number of phone cords
1
1
User guide and Warranty card 1
Handset Rechargeable AA
Ni-MH Batteries (1.2V
600mAh)
2
If any of these items are missing, please contact the retailer where you
purchased the product from.
Purchasing additional handsets
You may expand your P80 by adding more handsets (P8050HS). These
may be purchased separately from the retailer where you purchased the
product from, or direct from Oricom (Australia). The P80 can accommodate
a total of 4 Handsets.
5
GETTING STARTED
Key Layout
LCD Display
Phonebook
Redial
Talk / Recall
Off / Exit
CID /
CID /
Scroll backward
Scroll forward
# / Keylock /
Pause
¿ /
Ringer On-Off
Page
Intercom /
Conference
OK /
Program
Mute /
Delete
6
LCD display on the handset
Base Ringer
Setting
Handset
Ringer
Setting
Recall
Registration
programming
duration
Ringer
Battery
Signal
Menu
up/down
Character
Display
Left Arrow
Right Arrow
Ringer Off
Message
waiting
Phonebook
Key lock
Off hook Mute
New CID
The handset is linked to the base
Displays the current battery level. It scrolls during
charging.
Appear together with either handset or base ringer setting.
Use to set the handset ringer.
Use to set the base ringer.
Use to set the recall duration.
Use to register the handset.
There are more digits on the left
There are more digits on the right
The ringer is turned off
The keypad is locked.
Phonebook records are being reviewed
The phone is in use. It blinks during ringing.
The call is muted
There is a new CID record or CID records are being
reviewed
The CID being reviewed is a new call
There is a new message
7
Initial Setup
1. Connect the output plug of the mains adapter to the adapter socket on
the back of the base unit and the mains adapter to the wall mains supply.
2. Connect the telephone lead to the phone cord socket on the back of the
base unit and to the wall phone socket.
3. Remove the battery door on the handset by lifting the battery door
outward from the bottom.
4. Insert 2 x AAA rechargeable batteries supplied into each, observing their
polarities, into the battery compartment.
5. Replace the battery door firmly into place.
6. Place the handset on the base unit and let the batteries charge for a full
14 hours before using.
Charging the handset
An empty battery icon indicates the batteries need recharging. Place the
handset on the base cradle to recharge the batteries. You should hear a
(double beep) when handset is put on the charging cradle. The handset
battery icon scrolls during charging. Handset may take some time to
power up and it may get warm during initial charge. This is normal. A
handset reaching a very low battery voltage level will go into sleep mode,
displaying LOW BATT on the screen.
Tip! It is good practice to put the handset on the base unit to charge when it
is not in use or every evening to ensure the handset is always fully charged.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. Refer to the original type supplied with this telephone. Ni-MH
batteries must be disposed of in accordance with applicable waste disposal
regulations.
8
BASIC OPERATIONS
During standby
ORICOM
1
When the phone is in standby, the LCD displays the handset label. The
handset number related to the connected base will also be displayed right
justified. The battery icon reflects the current battery level and the signal
icon indicates the handset is linked to the base.
Answering an incoming external call
JOHN
When there is an incoming call, the phone rings and
record is received, the caller information is displayed.
flashes. If a CID
turns on if the phone number contains more than 12 digits. In this case,
only the last 12 digits are displayed.
If you press
off for this incoming call.
1. Press to answer the call.
2. Call timer is displayed 10 seconds after the call is connected
when the phone is ringing, the handset ringer will be turned
turns on.
3. Press or place the handset on the base cradle to disconnect.
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialing
1. Press
and wait for the dial tone.
2. Use the number pad to dial the phone number. The display shows the
digits as you enter them.
3. When you enter more than 12 digits, turns on. In this case, you only
see the last 12 digits on the screen.
9
Predialing
Pre-dial allows you to enter a telephone number and verify it on the screen
before you place the call. The screen displays the last 12 digits dialed but
you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold
. A pause is displayed as “P”.
#
3. When you enter more than 12 digits, turns on. If you attempt to enter
more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
to erase one digit at a time. Or you
DEL
can press
standby.
to clear the entire number and return the phone to
5. Press
to dial out the number.
Dialing from a phonebook record
1. Press . during standby. in the display turns on.
2. Press
to search for the record that you would like to dial. Or
you can use the number keys to jump directly to the record starting with
the corresponding letters of that key.
3. Press OK repeatedly will show the name and number of the record
accordingly.
4. Press
to dial out the number.
Redialing the last dialed number
1. Press . The last number dialed is displayed.
2. turns on when the number contains more than 12 digits. Press OK
to view the off-page digits.
3. Press to dial out the number.
During an external call
Call timer
01-10
The call timer will be displayed a short while after your call is connected. It
shows the duration of the call. This timer is shown in minutes and seconds
(MM-SS) in the first hour. After that, it will be shown in hours and minutes
(HH-MM) with the “-“ blinking to indicate the seconds.
10
When you end a call, the timer will be displayed for 5 more seconds before
the screen returns to the handset label.
Adjusting the volume
During a call you can adjust the earpiece volume.
Press
to adjust the receiver volume. The display shows the
volume level of high “OOO”, medium “OO” or low “O”.
NOTE: When you hang up the volume with return to the default level.
Muting the call
1. Press MUTE to mute the call.
turns on. The caller would not be
able to hear you but you would still be able to hear the caller.
2. Press MUTE again to unmute the call.
Chain dialing
You can dial out numbers from the phonebook even after you have seized
the phone line. And there is no limit to the number of times chain dialing is
accessed.
1. Press
.
turns on.
2. Press
to scroll through the phonebook records. Or you can
use the number keys to jump directly to the record starting with the
corresponding letters of that key. If you decide to quit using chain
dialing, simply press
to exit.
3. Press OK to dial out the number.
Call waiting
You can use the recall function to answer a second call while you are on the
phone. However this service will need to be turned on. For example to turn
on Telstra’s Call Waiting service:
1. Press
wait for dial tone then Press *43#
2. You will hear a service tone then Press
.
Take two different calls at the same time
If you have subscribed to your telephone network operators Call Waiting
Caller ID service, your phone will display the number of the second incoming
call for around 20 seconds while you are talking on the phone.
During a call, you will hear two loud beeps periodically to notify you of
another incoming call. If you wish to answer this call
11
1. When the handset receives a second call, the number of the caller
appears on the display. It will display for 20 seconds or until you press a
key on the phone. Press
listen for dial tone then Press 2 to put
the current call on hold and talk with the second caller.
2. Subsequent presses of
listen for dial tone then Press 2 will toggle
you between these 2 callers.
Caller information of this second call will be stored in the call log.
CALLER ID
If you subscribe to the Caller ID service, your phone automatically stores the
last 10 incoming calls. Each record holds up to 20 digits.
When the phone rings and caller information is received, the display will
show the last 12 digits of the callers number. If there is an identical phone
number stored in the phonebook, that phonebook name will be displayed
instead of the CID name.
Reviewing CID records
1. Press
empty,
when the phone is in standby. If the call log is not
turns on and the caller name of the most recent CID record is
displayed.
2. Press OK to view the number.
3. Press OK again to see the date / time when the call was received.
4. Whether you are viewing the name, number or date/time, pressing
will display the next older record and
the next newer record.
When
turns on, it means that received number is a new number.
Call back from a CID record
While you are viewing a CID record, you can return the call provided that it
contains a valid phone number by pressing
.
Saving a CID record to phonebook
You can save a CID record into the phonebook provided that it contains a
valid phone number and the phonebook is not full.
While you are viewing the CID record that you would like to save,
1. Press
.
12
2. If there is caller name in the CID record, the first 8 characters are
displayed for you to edit. If no caller name is available, you will be
prompted to enter a name.
3. Press OK to save the name. You will not be able to save it if this name
already exists in the phonebook. Edit the name and try again.
4. Edit the number if necessary and press OK to save it.
The record is now save into the phonebook. The original CID record in the
call list will now show the new name that you have entered.
Deleting a CID record
While you are reviewing the CID record that you would like to delete,
1. Press DEL .
2. Press OK to confirm.
Deleting the entire call log
While you are viewing any CID record,
1. Press and hold DEL until you are prompted to confirm the action.
2. Press OK .
The call log is now empty.
LAST NUMBER DIALED
Viewing the last number dialed
Your phone stores the last external numbers dialed, up to 20 digits.
1. Press
during standby. The last number dialed, if any, is displayed.
2. If a redial number matches a phonebook record, the phonebook name
will be displayed instead. Press OK to view the number.
3.
turns on when the number consists of more than 12 digits. You can
press OK to view the off page digits.
Storing a previously dialed number into phonebook
While you are reviewing a previously dialed number that you would like to
save,
1. Press
.
2. Use the number keys to enter the name. If you make a mistake, use
DEL to do the editing. A name can contain up to 8 characters.
If there’s already a phonebook record matching the number, that
phonebook name will appear and you can edit it.
13
3. Press OK to save the name. You will not be able to save it if this name
already exists in the phonebook. Edit the name and try again.
4. Edit the number if necessary and press OK to save it.
You have saved the number as a phonebook record. This record in the
redial list will now show the name that you have assigned to this number.
Deleting a previously dialed number
While you are viewing a previously dialed number, you can delete it by
1. Press DEL .
2. Press OK to confirm.
USING THE PHONEBOOK
Your phone can store up to 10 phonebook records. Each record can hold up
to 8 characters for name, and up to 20 digits for phone number.
A record may contain no name but when it does, the name is unique.
At any time during phonebook programming, you can press
programming or cancel the confirmation.
to quit the
Adding phonebook records
1. During standby mode, enter the phone number for the new record. A
phone number can contain up to 20 digits.
2. Press
and you are prompted to enter the name for this record.
3. Use the number keys to enter the name. If you make a mistake, use
DEL to do the editing. A name can contain up to 8 characters.
4. Press OK to confirm the name. You will be alerted to edit the name if it
is a duplicated name in the existing phonebook records.
5. You are now prompted with the phone number that you just entered.
Edit the number if necessary.
6. Press OK to save the number.
The phonebook record is now successfully stored. Repeat steps 1 to 6 to
add another record.
How to enter names
14
The number buttons are also inscribed with letters for entering the name. By
repeatedly pressing the appropriate button, upper case letters as well as
numbers and special characters can be entered.
KEY
1
1x
Space
2x
1
3x
4x
5x
2ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0
A
D
G
J
M
P
T
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
L
O
R
V
Y
7
9
W
0
*
#
Editing phonebook records
1. During standby mode, press
2. Press to search for the record that you would like to edit. Or
.
you can use the number keys to jump directly to the record starting with
the corresponding letters of that key.
3. Press
to select the record and edit the name.
4. Press DEL to delete a character / number.
5. Press OK to confirm name change and edit the number.
6. Press OK to confirm number change.
Repeat steps 1 to 6 to edit another record.
Deleting a phonebook record
1. During standby mode, press
.
2. Press to search for the record that you would like to delete.
Or you can use the number keys to jump directly to the record starting
with the corresponding letters of that key.
3. Press OK to select the record to be deleted. Press OK repeatedly to
view the rest of the record information.
4. Press DEL to delete.
5. Press OK to confirm.
Repeat steps 1 to 5 to delete another record.
15
Deleting the entire phonebook
1. While reviewing the phonebook, press and hold DEL .
2. Press OK when prompted to confirm the action.
The phonebook is now empty.
CUSTOMISING THE PHONE
PROGRAMMING THE PHONE
Press PROG during standby to enter program mode. All programming
icons will appear in order with the first icon on the left flashing. You can then
press
to select the item you would like to program.
During programming, you can press
to go back to program mode or
at any time to exit the program
cancel the confirmation. Press and hold
mode and return to standby.
Handset Ringer Melody & volume
1. Press PROG during standby and you will see
flashing.
2. Press OK to select.
3. Press
to listen to and select from the 5 melodies.
4. Press OK to confirm your selection and you will be prompted to volume
Setting.
5. Press
to listen to and select from the different volume levels.
6. Press OK to confirm your selection.
is turned off.
will turn on if the handset ringer
Base Ringer Melody & volume
1. Press PROG during standby and press
flashing.
or
until you see
2. Press OK to select.
3. Press
to listen to and select from the 5 melodies.
4. Press OK to confirm your selection and you will be prompted to volume
Setting.
5. Press
to listen to and select from the different volume levels.
6. Press OK to confirm your selection.
You have the option to turn off the base ringer.
16
You cannot program the base ringer if the handset has lost link with the base.
UNAVAIL will be displayed. Re-establish the link and try again.
Recall duration
When you are talking on the phone, pressing
will send a flash signal.
Recall settings are; Australia (Recall 1)100ms and New Zealand (Recall 2)
600ms. You should not need to change these settings.
Press PROG during standby and press
until you see flashing.
1. Press OK to select. The current duration is now displayed.
2. Press 1 or 2 directly or press
to select.
3. Press OK to confirm.
Register
Each handset can register to one base at a time only. The current base will
be deregistered when a new base is registered.
Each base can register up to 4 handsets.
1. Press PROG during standby and press
flashing.
or
until you see icon
2. Press OK to select.
3. Before you enter the PIN, press and hold
on the base for 2 seconds
until a registration tone is emitted. The base is now in the registration
mode. (If the base is full and cannot take on any more handset, it will
emit a reject tone instead. See the section of Deregister to delete a
currently registered handset.)
4. Enter the PIN of the base and press OK .
You will hear a confirmation tone if the registration is successful. The
handset label and the handset number will be displayed.
If the registration is not successful, you will see NOT REG on the handset.
Follow the procedure and try again.
Deregister
A handset can deregister another handset registered to the same base. It
cannot deregister itself.
1. Press PROG during standby follow by the 9 key.
2. Enter the handset number (i.e. HS#2) to delete. The LCD will display 9-2.
3. Press OK and then
4. Enter the PIN
5. Press OK to confirm.
17
PIN code
A PIN is required for registration and deregistration. The ex-factory PIN is
0000 but you can change this code.
1. Press PROG during standby follow by the 8 key.
2. Enter the current PIN and press OK .
3. Enter the new PIN. It can contain from 0 up to 8 digits. Press OK .
4. Repeat the new PIN and press OK to confirm the new code. You will
hear a confirmation tone if it is successful, or a reject tone if the same
PIN is not entered.
Reset
If you reset the phone, all the settings will return to the factory default
settings.
1. Press PROG during standby. Then press and hold DEL until RESET
is displayed.
2. Press OK to confirm the action.
You cannot reset the phone if the handset has lost link with the base.
UNAVAIL will be displayed. Re-establish the link and try again.
OTHER FEATURES
OTHER FEATURES
Key lock
Press and hold
whenever keypad is locked.
When the keypad is locked, you can still answer an incoming call by
pressing . During the call, the keypad functions as normal. When the
during standby to lock the keypad.
appears
call is ended, the keypad will be locked again.
To unlock the keypad, press any key and then press OK when you see
PRESS OK.
18
Shortcut to turn handset ringer on/off
You can use this shortcut to turn on/off the handset ringer when the phone is
in standby. Simply press and hold
ringer is turned off.
.
appears whenever the handset
Message waiting indication
You have to subscribe to a voice message service (eg Telstra Message
Bank) from your local service provider to use this feature. When you receive
a voice message,
messages the message
will appear on the display. When you retrieve your
will turn off. You can also turn it off by pressing
for 2 seconds during standby.
Paging the handsets
You can page or locate the handsets by pressing the
on the base. All
handsets registered to the base will produce the paging tone for 30 seconds
and the screen displays blinking “####”.
You could stop the paging by pressing any key on each handset or pressing
the
on the base again.
Out of range warning
When you are talking on the phone and you take the handset too far away
from the base, you’ll hear an alert tone through the speaker. You should
bring the handset back in range with the base. Failing to do so will result in
the call being disconnected.
When the handset is too far away from the base during standby, you will see
flashing.
BENEFITS OF MULTI-HANDSETS
You can use these useful features if you have 2 or more handsets registered
to the base.
Answering an internal call
When you receive an intercom call, your handset will ring with
blinking.
You can see the number on the screen of the handset that is calling.
If you press when the phone is ringing, the handset ringer will turn off
for this incoming internal call.
Press to answer.
19
Making an internal call
When the phone is in standby,
1. Press INT .
turns on and you’ll hear an internal dialing tone.
2. Press the number of the handset that you want to call.
(Or you can press the handset number first, followed by INT .)
You will hear a busy tone if the other handset is not available.
To end an internal call, press
or return the handset to the base cradle.
You will be alerted with short beeps if you receive an external call during
your intercom. Caller information will be displayed if it is available. You
need to end the intercom first before you can answer the external call.
During an external call
Inquiry call
1. Press INT to put the external line on hold.
2. Press the handset number that you want to call.
3. After the other handset has answered, you can press INT repeatedly to
switch between the external line and the intercom.
If the other handset does not answer, press INT again to cancel the
attempt and return to the external line.
Call transfer
While you are in an inquiry call with the other handset, press
or return
the handset to the base cradle. The call has now been transferred.
Conference call
While you are in an inquiry call with the other handset, press and hold
CONF to set up a conference call between the external line and the 2
handsets.
During the conference call, pressing CONF will put the external line on hold
and you can talk to the other handset in private. Press and hold CONF to
establish the conference call again.
Any handset hangs up during a conference call will leave the other handset
still connecting with the external call.
20
TROUBLESHOOTING
Are you having trouble with your phone? Here are some answers to
common questions.
Problems
Solutions
The phone does not work
at all
• Make sure that adapter and phone cord are
connected properly.
• Check that the batteries are fully charged
and installed properly.
• This phone does not work during power
failure.
The phone does not ring
There is no dial tone
• Make sure the adapter and the phone cord
are connected properly.
• Move the handset closer to the base unit.
• Make sure the handset (or base) ringer is
turned on.
• Check that the phone cord is connected
properly.
• Check the handset is fully charged.
• Move the handset closer to the base unit.
• Check with your local phone company that
the CID service is subscribed to.
• Let the phone ring at least once before
answering.
CID does not work
properly
The CIDCW call cannot
be answered
The empty battery icon
appears soon after the
batteries are charged
• Check with your local phone company and
select the correct recall duration
• Replace the batteries with new ones.
NOTES FOR OPERATION IN NEW ZEALAND
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with the minimum
conditions for connection to its network. It indicates no endorsement of the
product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with
another item of Telepermitted equipment of a different make or model, nor
does it imply that any product is compatible with all of Telecom’s network
21
services. This device may be subject to ringing or bell tinkle when certain
other devices are connected to the same line. If this occurs, the problem
should not be referred to the Telecom Faults service.
This equipment shall not be set to make automatic calls to the Telecom
“111” Emergency Service. This equipment may not provide for the effective
hand-over of a call to another device connected to the same line.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only if you
wish to connect more than 1 telephone to your telephone line. A standard
telephone line has a maximum REN capacity of 3 (RN of 5). It is possible to
connect 3(5) devices with a REN of 1 (RN of 1) with no degradation to the
product’s performance. Exceeding this limit may cause the volume of the
ringer in any phone to decrease or not ring at all.
Caller ID
Customers using non Telecom toll services should not use the dial back
feature for local calls as this will incur a charge only the 7 digit number
should be dialled. Some of the CID services listed may not be available in
New Zealand.
This telephone is not designed for making emergency telephone calls when
the power fails. Make alternative arrangements for access to emergency
services.
WARRANTY INFORMATION
This product is covered by a 12 month warranty against defective
workmanship or parts. The warranty does not extend to damage caused by
misuse, negligence, excessive voltage, faults on the telephone line or lightning.
This guarantee in no way affects your statutory rights. Full details of the
warranty are contained in the enclosed warranty card.
If you feel this product is not working correctly please consult the user guide
and ensure that you are using the product in accordance with the
instructions. Remove all extra telephone equipment and connect only this
telephone directly to the telephone socket.
22
If the fault is still present, connect another telephone (if available) to the
telephone socket. The results will show you whether the fault lies with this
unit or with the telephone line.
If the product is working correctly the fault is on the telephone line. Please
contact your network operator for assistance.
To orders spare parts additional handsets, replacement batteries and
in case of any technical issues you may have with product please
consult our website for further information or send us an email for a
prompt response to your enquiry.
In the unlikely event of a fault developing, please contact us for
Australia
New Zealand
Atlas Gentech (NZ) Limited
Private Bag 14927,
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Panmure, Auckland
Customer support
Customer support
Fax: (02) 4574 8898
Ph: 1300 889 785
Fax: (09) 574 2722
Ph: 0900 50 025 (Toll Call)
23
|